aboutsummaryrefslogtreecommitdiffstats
path: root/include/target (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-07-07target: make queue_tm_rsp() return voidJoern Engel1-1/+1
The return value wasn't checked by any of the callers. Assuming this is correct behaviour, we can simplify some code by not bothering to generate it. nab: Add srpt_queue_data_in() + srpt_queue_tm_rsp() nops around srpt_queue_response() void return Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07target: remove unused codes from enum tcm_tmrsp_tableJoern Engel1-8/+5
Three have been checked for but were never set. Remove the dead code. Also renumbers the remaining ones to a) get rid of the holes after the removal and b) avoid a collision between TMR_FUNCTION_COMPLETE==0 and the uninitialized case. If we failed to set a code, we should rather fall into the default case then return success. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTEDNicholas Bellinger1-0/+4
This patch addresses a bug where RDMA_CM_EVENT_DISCONNECTED may occur before the connection shutdown has been completed by rx/tx threads, that causes isert_free_conn() to wait indefinately on ->conn_wait. This patch allows isert_disconnect_work code to invoke rdma_disconnect when isert_disconnect_work() process context is started by client session reset before isert_free_conn() code has been reached. It also adds isert_conn->conn_mutex protection for ->state within isert_disconnect_work(), isert_cq_comp_err() and isert_free_conn() code, along with isert_check_state() for wait_event usage. (v2: Add explicit iscsit_cause_connection_reinstatement call during isert_disconnect_work() to force conn reset) Cc: stable@vger.kernel.org # 3.10+ Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-06iscsi-target: Fix iscsit_sequence_cmd reject handling for iserNicholas Bellinger1-1/+2
This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd() in order to avoid external iscsit_reject_cmd() reject usage for all PDU types. It also updates PDU specific handlers for traditional iscsi-target code to not reset the session after posting a ISCSI_OP_REJECT during setup. (v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call target_put_sess_cmd() after iscsit_sequence_cmd() failure) Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-06iscsi-target: Fix iscsit_add_reject* usage for iserNicholas Bellinger1-2/+0
This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd() usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use usage bug in v3.10 with iser-target code. It saves ->reject_reason for use within iscsit_build_reject() so the correct value for both transport cases. It also drops the legacy fail_conn parameter usage throughput iscsi-target code and adds two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions, along with various small cleanups. (v2: Re-enable target_put_sess_cmd() to be called from iscsit_add_reject_from_cmd() for rejects invoked after target_get_sess_cmd() has been called) Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-03target: Add se_portal_group->tpg_auth_groupNicholas Bellinger3-1/+14
This patch adds an optional /auth/ configfs group to TPG context that can be used by fabrics like iscsi-target for TPG demo-mode authentication. Cc: Dax Kelson <dkelson@gurulabs.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-26iscsi-target: Refactor ISCSI_OP_TEXT_RSP TX handlingNicholas Bellinger1-0/+2
This patch refactoring existing iscsit_send_text_rsp() in order to handle iscsi_text_rsp payloads in a transport specific manner. This includes the addition of iscsit_build_text_rsp() to build the response payload and initialize ISCSI_OP_TEXT_RSP. v2: Make iscsit_build_text_rsp() determine extra padding bytes, and drop legacy padding calculation for traditional iSCSI text responses within iscsit_send_text_rsp() Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-24iscsi-target: Refactor ISCSI_OP_TEXT RX handlingNicholas Bellinger1-0/+4
This patch refactors ISCSI_OP_TEXT handling within iscsi-target in order to handle iscsi_text payloads in a transport specific manner. This includes splitting current iscsit_handle_text_cmd() into iscsit_setup_text_cmd() and iscsit_process_text_cmd() calls, and makes iscsit_handle_text_cmd be only used internally by traditional iscsi socket calls. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-24iscsi/isert-target: Refactor ISCSI_OP_NOOP RX handlingNicholas Bellinger1-2/+4
This patch refactors ISCSI_OP_NOOP handling within iscsi-target in order to handle iscsi_nopout payloads in a transport specific manner. This includes splitting existing iscsit_handle_nop_out() into iscsit_setup_nop_out() and iscsit_process_nop_out() calls, and makes iscsit_handle_nop_out() be only used internally by traditional iscsi socket calls. Next update iser-target code to use new callers and add FIXME for the handling iscsi_nopout payloads. Also fix reject response handling in iscsit_setup_nop_out() to use proper iscsit_add_reject_from_cmd(). v2: Fix uninitialized iscsit_handle_nop_out() payload_length usage (Fengguang) v3: Remove left-over dead code in iscsit_setup_nop_out() (DanC) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-20target: Drop legacy se_cmd->check_release bitNicholas Bellinger1-2/+0
Now with iscsi-target using modern se_cmd->cmd_kref accounting in v3.10 code, it's safe to go ahead and drop the legacy release codepath + se_cmd->check_release bit in transport_release_cmd() Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-20target: Remove legacy t_fe_count + avoid t_state_lock access in transport_put_cmdNicholas Bellinger1-1/+0
This patch removes legacy se_cmd->t_fe_count usage in order to avoid se_cmd->t_state_lock access within transport_put_cmd() during normal fast path se_cmd descriptor release. Also drop the left-over parameter usage within core_tmr_handle_tas_abort() Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Allocate aptpl_buf inside update_and_write_aptpl()Andy Grover1-2/+0
Instead of taking the buffer and length, update_and_write_aptpl() will allocate the buffer as needed, and then free it. Instead, the function takes an 'aptpl' boolean parameter. This enables us to remove memory alloc/frees from struct t10_pr_registration and other spots. There is a slight loss of functionality because each callsite doesn't get its own pr_debug any more, but this info can be cleaned via ftrace if necessary and I think the shorter code is worth it. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Remove t10_reservation.pr_aptpl_buf_lenAndy Grover1-2/+0
It's only ever set to PR_APTPL_BUF_LEN, so we don't need a variable. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31target: Propigate up ->cmd_kref put return via transport_generic_free_cmdNicholas Bellinger1-1/+1
Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-29target: Re-instate sess_wait_list for target_wait_for_sess_cmdsNicholas Bellinger1-0/+1
Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-20target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmdsJoern Engel1-1/+1
Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-15target: removed unused transport_state flagJoern Engel1-1/+0
Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03target: Remove unused struct members in se_dev_entryAndy Grover1-4/+0
Some were incremented, but never used anywhere from what I could tell. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iscsit_transport API templateNicholas Bellinger1-0/+83
Add basic struct iscsit_transport API template to allow iscsi-target for running with external transport modules using existing iscsi_target_core.h code. For all external modules, this calls try_module_get() and module_put() to obtain + release an external iscsit_transport module reference count. Also include the iscsi-target symbols necessary in iscsi_transport.h to allow external transport modules to function. v3 changes: - Add iscsit_build_reject export for ISTATE_SEND_REJECT usage v2 changes: - Drop unnecessary export of iscsit_get_transport + iscsit_put_transport (roland) - Add ->iscsit_queue_data_in() to remove extra context switch on RDMA_WRITE - Add ->iscsit_queue_status() to remove extra context switch on IB_SEND status - Add ->iscsit_get_dataout() to remove extra context switch on RDMA_READ - Drop ->iscsit_free_cmd() - Drop ->iscsit_unmap_cmd() - Rename iscsit_create_transport() -> iscsit_register_transport() (andy) - Rename iscsit_destroy_transport() -> iscsit_unregister_transport() (andy) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Add export of target_get_sess_cmd symbolNicholas Bellinger1-1/+1
Export target_get_sess_cmd() symbol so that it can be used by iscsi-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Add sbc_execute_unmap() helperAsias He1-0/+4
iblock_execute_unmap() and fd_execute_unmap share a lot of code. Add sbc_execute_unmap() helper to remove duplicated code for iblock_execute_unmap() and fd_execute_unmap(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-23target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectorsRoland Dreier1-1/+1
Trivial, but WRITE SAME is an SBC command so it seems strange for a related function (defined in target_core_sbc.c) to be in the spc_ namespace. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target: Fix error checking for UNMAP commandsRoland Dreier1-0/+1
SBC-3 (revision 35) says: The PARAMETER LIST LENGTH field specifies the length in bytes of the UNMAP parameter list that is available to be transferred from the Data-Out Buffer. If the parameter list length is greater than zero and less than 0008h (i.e., eight), then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to PARAMETER LIST LENGTH ERROR. A PARAMETER LIST LENGTH set to zero specifies that no data shall be sent. so our sense code for too-short descriptors was wrong, and we were incorrectly failing commands that didn't transfer any descriptors. While we're at it, also handle the UNMAP check: If the ANCHOR bit is set to one, and the ANC_SUP bit in the Logical Block Provisioning VPD page (see 6.6.4) is set to zero, then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD IN CDB. (chris boot: Fix wrong cut+paste comment in transport_send_check_condition_and_sense) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target: Add device attribute to expose config_item_name for INQUIRY modelTregaron Bayly1-0/+3
This patch changes LIO to use the configfs backend device name as the model if you echo '1' to an individual device's emulate_model_alias attribute. This is a valid operation only on devices with an export count of 0. Signed-off-by: Tregaron Bayly <tbayly@bluehost.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled statusNicholas Bellinger1-0/+1
This patch allows IBLOCK to check block hints in request_queue->flush_flags when reporting current backend device WriteCacheEnabled status to a remote SCSI initiator port. This is done via a se_subsystem_api->get_write_cache() call instead of a backend se_device creation time flag, as we expect REQ_FLUSH bits to possibly change from an underlying blk_queue_flush() by the SCSI disk driver, or internal raw struct block_device driver usage. Also go ahead and update iblock_execute_rw() bio I/O path code to use REQ_FLUSH + REQ_FUA hints when determining WRITE_FUA usage, and make SPC emulation code use a spc_check_dev_wce() helper to handle both types of cases for virtual backend subsystem drivers. (asias: Drop unnecessary comparsion operators) Reported-by: majianpeng <majianpeng@gmail.com> Cc: majianpeng <majianpeng@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target: change sprintf to snprintf in transport_dump_vpd_identDan Carpenter1-1/+1
"buf" is 128 characters and "vpd->device_identifier" is 256. It makes the static checkers complain. Also bump VPD_TMP_BUF_SIZE to match INQUIRY_VPD_DEVICE_IDENTIFIER_LEN. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target: Remove never-used TMR_FABRIC_TMR enum valueRoland Dreier1-1/+0
Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target: Export SPC inquiry emulationHannes Reinecke1-0/+2
Some target drivers might need to access the inquiry data directly, without sending out the actual command. So export these functions. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10target: Introduce TCM_NO_SENSEHannes Reinecke1-0/+1
Introduce TCM_NO_SENSE, mapping to sense code 'Not ready, no additional sense information'. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-12-13target/iscsi_target: Add NodeACL tags for initiator group supportAndy Grover2-0/+4
Thanks for reviews, looking a lot better. ---- 8< ---- Initiator access config could be easier. The way other storage vendors have addressed this is to support initiator groups: the admin adds initiator WWNs to the group, and then LUN permissions can be granted for the entire group at once. Instead of changing ktarget's configfs interface, this patch keeps the configfs interface per-initiator-wwn and just adds a 'tag' field for each. This should be enough for user tools like targetcli to group initiator ACLs and sync their configurations. acl_tag is not used internally, but needs to be kept in configfs so that all user tools can avoid dependencies on each other. Code tested to work, although userspace pieces still to be implemented. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-12-05target: Add link_magic for fabric allow_link destination target_itemsNicholas Bellinger1-0/+4
This patch adds [dev,lun]_link_magic value assignment + checks within generic target_fabric_port_link() and target_fabric_mappedlun_link() code to ensure destination config_item *target_item sent from configfs_symlink() -> config_item_operations->allow_link() is the underlying se_device->dev_group and se_lun->lun_group that we expect to symlink. Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-27target: Make spc_get_write_same_sectors return sector_tNicholas Bellinger1-1/+1
We already expect TFO->get_blocks() to return sector_t for zero value case when doing WRITE_SAME to the end of the backend device, so go ahead and return sector_t from spc_get_write_same_sectors() to handle this case properly. Also, update the single iblock_execute_write_same() caller of this code. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-15target: Add/check max_write_same_len device attribute + update block limits VPDNicholas Bellinger1-0/+3
This patch adds a new max_write_same_len device attribute for use with WRITE_SAME w/ UNMAP=0 backend emulation. This can be useful for lowering the default backend value (IBLOCK uses 0xFFFF). Also, update block limits VPD emulation code in spc_emulate_evpd_b0() to report MAXIMUM WRITE SAME LENGTH, and enforce max_write_same_len during sbc_parse() -> sbc_setup_write_same() CDB sanity checking for all emulated WRITE_SAME w/ UNMAP=0 cases. (Robert: Move max_write_same_len check in sbc_setup_write_same() to check both WRITE_SAME w/ UNMAP=1 and w/ UNMAP=0 cases) Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-15target/sbc: Seperate WRITE_SAME based on UNMAP flag in sbc_opsNicholas Bellinger1-0/+1
This patch adds a new sbc_ops->execute_write_same_unmap() caller for use with WRITE_SAME w/ UNMAP=1, and performs the ->execute_cmd() setup based this bit within sbc_setup_write_same() code. Also, makes the changes in sbc_parse_cdb() to handle a sense_reason_t return from sbc_setup_write_same() on error. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: pass sense_reason as a return valueChristoph Hellwig3-37/+38
Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: remove ->get_device_revChristoph Hellwig1-1/+0
Now that the reservations and ALUA code have been cleaned up there is no need for the get_device_rev method, as we only need the standards revision in the inquiry data, where we can hardcode it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: simplify alua supportChristoph Hellwig1-13/+0
We always support ALUA for virtual backends, and never for physical ones. Simplify the code to just deal with these two cases and remove the superflous abstractions. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: simplify reservations codeChristoph Hellwig1-29/+0
We do not support host-level reservations for the pscsi backend, and all virtual backends are newere than SCSI-2, so just make the combined SPC-3 + SCSI-2 support the only supported variant and kill the switches for the different implementations, given that this code handles the no-op version just fine. (hch: Update DRF_SPC2_RESERVATIONS lock usage) Signed-off-by: Christoph Hellwig <hch@lst.de>
2012-11-06target: kill dev->dev_task_attr_typeChristoph Hellwig1-11/+0
We can just key off ordered tag emulation of the transport_type field. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: provide generic sbc device type/revision helpersChristoph Hellwig1-1/+4
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target/pscsi: call spc_emulate_report_luns directlyChristoph Hellwig1-0/+1
No need to indirect through spc_parse_cdb if we only ever call it for REPORT LUNS emulation. (nab: Add missing EXPORT_SYMBOL for spc_emulate_report_luns) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: rename spc_opsChristoph Hellwig1-2/+2
These really are sbc_ops, so name them correctly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: kill struct se_subsystem_devChristoph Hellwig2-91/+38
Simplify the code a lot by killing the superflous struct se_subsystem_dev. Instead se_device is allocated early on by the backend driver, which allocates it as part of its own per-device structure, borrowing the scheme that is for example used for inode allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02target: Add target_submit_cmd_map_sgls for SGL fabric memory passthroughNicholas Bellinger1-0/+3
This patch adds a new target_submit_cmd_map_sgls() to pass pre-allocated SGL memory using transport_generic_map_mem_to_cmd() logic into the generic target submit I/O codepath. It also adds a target_submit_cmd() wrapper around target_submit_cmd_map_sgls() for existing fabric code that already assumes internal target-core SGL memory allocation. (v2: Rename to target_submit_cmd_map_sgls + drop TARGET_SCF_MAP_MEM flag in favor of non zero sgl_count check) Reported-by: Christoph Hellwig <hch@lst.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Drop se_subsystem_api->[write_cache,fua_write]_emulated flagsNicholas Bellinger1-3/+0
This patch drops se_subsystem_api->[write_cache,fua_write]_emulated flags set by viritual FILEIO/IBLOCK/RD_MCP backend drivers in favor of explict TRANSPORT_PLUGIN_PHBA_PDEV checks to know when to fail if userspace is attempting to set virtual emulation bits for an pSCSI (passthrough) backend device. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Simplify fabric sense data length handlingRoland Dreier1-1/+0
Every fabric driver has to supply a se_tfo->set_fabric_sense_len() method, just so iSCSI can return an offset of 2. However, every fabric driver is already allocating a sense buffer and passing it into the target core, either via transport_init_se_cmd() or target_submit_cmd(). So instead of having iSCSI pass the start of its sense buffer into the core and then later tell the core to skip the first 2 bytes, it seems easier for iSCSI just to do the offset of 2 when it passes the sense buffer into the core. Then we can drop the se_tfo->set_fabric_sense_len() everywhere, and just add a couple of lines of code to iSCSI to set the sense data length to the beginning of the buffer right before it sends it over the network. (nab: Remove .set_fabric_sense_len usage from tcm_qla2xxx_npiv_ops + change transport_get_sense_buffer to follow v3.6-rc6 code w/o ->set_fabric_sense_len usage) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Remove unused target_core_fabric_ops.get_fabric_sense_len methodRoland Dreier1-1/+0
There are no callers of se_tfo->get_fabric_sense_len(), so we should stop having every fabric driver implement it. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07target: support zero allocation length in REQUEST SENSEPaolo Bonzini1-0/+1
Similar to INQUIRY and MODE SENSE, construct the sense data in a buffer and later copy it to the scatterlist. Do not do anything, but still clear a pending unit attention condition, if the allocation length is zero. However, SPC tells us that "If a REQUEST SENSE command is terminated with CHECK CONDITION status [and] the REQUEST SENSE command was received on an I_T nexus with a pending unit attention condition (i.e., before the device server reports CHECK CONDITION status), then the device server shall not clear the pending unit attention condition." Do the transport_kmap_data_sg early to detect this case. It also tells us "Device servers shall not adjust the additional sense length to reflect truncation if the allocation length is less than the sense data available", so do not do that! Note that the err variable is write-only. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-05target: fix use-after-free with PSCSI sense dataPaolo Bonzini1-1/+3
The pointer to the sense buffer is fetched by transport_get_sense_data, but this is called by target_complete_ok_work long after pscsi_req_done has freed the struct that contains it. Pass instead the fabric's sense buffer to transport_complete, and copy the data to it directly in transport_complete. Setting SCF_TRANSPORT_TASK_SENSE also becomes a duty of transport_complete. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-08-21target: Remove unused se_cmd.cmd_spdtlRoland Dreier1-2/+0
This was originally for helping fabrics to determine overflow/underflow status, and has been superceeded by SCF_OVERFLOW_BIT + SCF_UNDERFLOW_BIT. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.