aboutsummaryrefslogtreecommitdiffstats
path: root/include/uapi/linux/pci_regs.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-23Merge branch 'lorenzo/pci/tegra'Bjorn Helgaas1-1/+13
- Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak
2019-09-05PCI: pciehp: Remove pciehp_set_attention_status()Denis Efremov1-0/+1
Remove pciehp_set_attention_status() and use pciehp_set_indicators() instead, since the code is mostly the same. Link: https://lore.kernel.org/r/20190903111021.1559-4-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-08-13PCI: Add #defines for some of PCIe spec r4.0 featuresVidya Sagar1-1/+13
Add #defines only for the Data Link Feature and Physical Layer 16.0 GT/s features as defined in PCIe spec r4.0, sec 7.7.4 for Data Link Feature and sec 7.7.5 for Physical Layer 16.0 GT/s. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-06-13PCI: Decode PCIe 32 GT/s link speedGustavo Pimentel1-0/+4
PCIe r5.0, sec 7.5.3.18, defines a new 32.0 GT/s bit in the Supported Link Speeds Vector of Link Capabilities 2. Decode this new speed. This does not affect the speed of the link, which should be negotiated automatically by the hardware; it only adds decoding when showing the speed to the user. Previously, reading the speed of a link operating at this speed showed "Unknown speed" instead of "32.0 GT/s". Link: https://lore.kernel.org/lkml/92365e3caf0fc559f9ab14bcd053bfc92d4f661c.1559664969.git.gustavo.pimentel@synopsys.com Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-13Merge branch 'pci/trivial'Bjorn Helgaas1-67/+65
- Cleanup PCI register definitions, typos, etc (Bjorn Helgaas) - Remove unnecessary use of user-space types in CPER (Bjorn Helgaas) - Cleanup setup-bus.c comments & whitespace (Nicholas Johnson) * pci/trivial: PCI: Cleanup setup-bus.c comments and whitespace CPER: Remove unnecessary use of user-space types CPER: Add UEFI spec references PCI: Fix comment typos PCI: Cleanup register definition width and whitespace # Conflicts: # drivers/pci/pci.c # drivers/pci/setup-bus.c
2019-04-17PCI: Assign bus numbers present in EA capability for bridgesSubbaraya Sundeep1-0/+6
The "Enhanced Allocation (EA) for Memory and I/O Resources" ECN, approved 23 October 2014, sec 6.9.1.2, specifies a second DW in the capability for type 1 (bridge) functions to describe fixed secondary and subordinate bus numbers. This ECN was included in the PCIe r4.0 spec, but sec 6.9.1.2 was omitted, presumably by mistake. Read fixed bus numbers from the EA capability for bridges. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> [bhelgaas: add pci_ea_fixed_busnrs() return value] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-03-22PCI: Cleanup register definition width and whitespaceBjorn Helgaas1-67/+65
Follow the file conventions of: - register offsets not indented - fields within a register indented one space - field masks use same width as register - register field values indented an additional space No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-02-26PCI/ATS: Add pci_ats_page_aligned() interfaceKuppuswamy Sathyanarayanan1-0/+1
Return the Page Aligned Request bit in the ATS Capability Register. As per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit is set, it indicates the Untranslated Addresses generated by the device are always aligned to a 4096 byte boundary. An IOMMU that can only translate page-aligned addresses can only be used with devices that always produce aligned Untranslated Addresses. This interface will be used by drivers for such IOMMUs to determine whether devices can use the ATS service. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-26PCI/ATS: Add pci_prg_resp_pasid_required() interface.Kuppuswamy Sathyanarayanan1-0/+1
Return the PRG Response PASID Required bit in the Page Request Status Register. As per PCIe spec r4.0, sec 10.5.2.3, if this bit is Set, the device expects a PASID TLP Prefix on PRG Response Messages when the corresponding Page Requests had a PASID TLP Prefix. If Clear, the device does not expect PASID TLP Prefixes on any PRG Response Message, and the device behavior is undefined if the device receives a PRG Response Message with a PASID TLP Prefix. Also the device behavior is undefined if this bit is Set and the device receives a PRG Response Message with no PASID TLP Prefix when the corresponding Page Requests had a PASID TLP Prefix. This function will be used by drivers like IOMMU, if it is required to check the status of the PRG Response PASID Required bit before enabling the PASID support of the device. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-28PCI: Add support for Immediate ReadinessFelipe Balbi1-0/+1
PCIe r4.0, sec 7.5.1.1.4 defines a new bit in the Status Register: Immediate Readiness – This optional bit, when Set, indicates the Function is guaranteed to be ready to successfully complete valid configuration accesses at any time following any reset that the host is capable of issuing Configuration Requests to this Function. When this bit is Set, for accesses to this Function, software is exempt from all requirements to delay configuration accesses following any type of reset, including but not limited to the timing requirements defined in Section 6.6. This means that all delays after a Conventional or Function Reset can be skipped. This patch reads such bit and caches its value in a flag inside struct pci_dev to be checked later if we should delay or can skip delays after a reset. While at that, also move the explicit msleep(100) call from pcie_flr() and pci_af_flr() to pci_dev_wait(). Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> [bhelgaas: rename PCI_STATUS_IMMEDIATE to PCI_STATUS_IMM_READY] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-15Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+1
- To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) * pci/virtualization: PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: Rename pci_try_reset_bus() to pci_reset_bus() PCI: Deprecate pci_reset_bus() and pci_reset_slot() functions PCI: Unify try slot and bus reset API PCI: Hide pci_reset_bridge_secondary_bus() from drivers IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset PCI: Handle error return from pci_reset_bridge_secondary_bus() PCI/IOV: Tidy pci_sriov_set_totalvfs() PCI: Enable PASID only if entire path supports End-End TLP prefixes # Conflicts: # drivers/pci/hotplug/pciehp_hpc.c
2018-06-30PCI: Enable PASID only if entire path supports End-End TLP prefixesSinan Kaya1-0/+1
A PCIe endpoint carries the process address space identifier (PASID) in the TLP prefix as part of the memory read/write transaction. The address information in the TLP is relevant only for a given PASID context. An IOMMU takes PASID value and the address information from the TLP to look up the physical address in the system. PASID is an End-End TLP Prefix (PCIe r4.0, sec 6.20). Sec 2.2.10.2 says It is an error to receive a TLP with an End-End TLP Prefix by a Receiver that does not support End-End TLP Prefixes. A TLP in violation of this rule is handled as a Malformed TLP. This is a reported error associated with the Receiving Port (see Section 6.2). Prevent error condition by proactively requiring End-End TLP prefix to be supported on the entire data path between the endpoint and the root port before enabling PASID. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-29PCI: Cleanup PCI_REBAR_CTRL_BAR_SHIFT handlingChristian König1-1/+2
Cleanup PCI_REBAR_CTRL_BAR_SHIFT handling. That was hard coded instead of properly defined in the header for some reason. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-07Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-0/+6
Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
2018-06-06Merge branch 'pci/misc'Bjorn Helgaas1-0/+5
- add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) * pci/misc: MIPS: PCI: Use dev_printk() when possible xtensa/PCI: Use dev_printk() when possible xtensa/PCI: Make variables static xtensa/PCI: Remove dead code microblaze/PCI: Remove pcibios_claim_one_bus() dead code microblaze/PCI: Remove pcibios_finish_adding_to_bus() dead code IB/hfi1: Replace custom hfi1 macros with PCIe macros PCI: Add PCI_EXP_LNKCTL2_TLS* macros
2018-06-02PCI/DPC: Disable ERR_NONFATAL handling by DPCOza Pawandeep1-0/+1
PCIe ERR_NONFATAL errors mean a particular transaction is unreliable but the Link is otherwise fully functional (PCIe r4.0, sec 6.2.2). The AER driver handles these by logging the error details and calling driver-supplied pci_error_handlers callbacks. It does not reset downstream devices, does not remove them from the PCI subsystem, does not re-enumerate them, and does not call their driver .remove() or .probe() methods. But DPC driver previously enabled DPC on ERR_NONFATAL, so if the hardware supports DPC, these errors caused a Link reset (performed automatically by the hardware), followed by the DPC driver removing affected devices (which calls their .remove() methods), bringing the Link back up, and re-enumerating (which calls driver .probe() methods). Disable ERR_NONFATAL DPC triggering so these errors will only be handled by AER. This means drivers won't have to deal with different usage of their pci_error_handlers callbacks and .probe() and .remove() methods based on whether the platform has DPC support. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-27PCI: Add PCI_EXP_LNKCTL2_TLS* macrosFrederick Lawler1-0/+5
The Link Control 2 register is missing macros for Target Link Speeds. Add those in. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: use "GT" instead of "GB"] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-16PCI: Add two more values for PCIe Max_Read_Request_SizeHeiner Kallweit1-0/+2
This patch adds missing values for the max read request size. E.g. network driver r8169 uses a value of 4K. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21PCI: Add decoding for 16 GT/s link speedJay Fang1-2/+5
PCIe 4.0 defines the 16.0 GT/s link speed. Links can run at that speed without any Linux changes, but previously their sysfs "max_link_speed" and "current_link_speed" files contained "Unknown speed", not the expected "16.0 GT/s". Add decoding for the new 16 GT/s link speed. Signed-off-by: Jay Fang <f.fangjian@huawei.com> [bhelgaas: add PCI_EXP_LNKCAP2_SLS_16_0GB] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dongdong Liu <liudongdong3@huawei.com>
2018-01-31Merge branch 'pci/misc' into nextBjorn Helgaas1-0/+2
* pci/misc: PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build PCI: Add wrappers for dev_printk() PCI: Remove unnecessary messages for memory allocation failures PCI: Add #defines for Completion Timeout Disable feature hinic: Replace PCI pool old API net: e100: Replace PCI pool old API block: DAC960: Replace PCI pool old API MAINTAINERS: Include more PCI files PCI: Remove unneeded kallsyms include powerpc/pci: Unroll two pass loop when scanning bridges powerpc/pci: Use for_each_pci_bridge() helper
2018-01-31Merge branch 'pci/enumeration' into nextBjorn Helgaas1-1/+3
* pci/enumeration: RDMA/qedr: Use pci_enable_atomic_ops_to_root() PCI: Add pci_enable_atomic_ops_to_root() PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports
2018-01-30PCI/DPC: Reformat DPC register definitionsBjorn Helgaas1-13/+13
Reformat DPC register definitions to follow the convention that register field masks indicate the register width, e.g., a field of a 16-bit register uses a mask of 4 hex digits, with leading zeros included as needed. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
2018-01-30PCI/DPC: Add and use DPC Status register field definitionsBjorn Helgaas1-0/+2
Add definitions for DPC Status register fields and use them in the code. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
2018-01-23PCI: Add pci_enable_atomic_ops_to_root()Jay Cornwall1-1/+3
The Atomic Operations feature (PCIe r4.0, sec 6.15) allows atomic transctions to be requested by, routed through and completed by PCIe components. Routing and completion do not require software support. Component support for each is detectable via the DEVCAP2 register. A Requester may use AtomicOps only if its PCI_EXP_DEVCTL2_ATOMIC_REQ is set. This should be set only if the Completer and all intermediate routing elements support AtomicOps. A concrete example is the AMD Fiji-class GPU (which is capable of making AtomicOp requests), below a PLX 8747 switch (advertising AtomicOp routing) with a Haswell host bridge (advertising AtomicOp completion support). Add pci_enable_atomic_ops_to_root() for per-device control over AtomicOp requests. This checks to be sure the Root Port supports completion of the desired AtomicOp sizes and the path to the Root Port supports routing the AtomicOps. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> [bhelgaas: changelog, comments, whitespace] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-10PCI: Add #defines for Completion Timeout Disable featureBjorn Helgaas1-0/+2
Add #defines for the Completion Timeout Disable feature and use them. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-15Merge tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-16/+28
Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-14Merge branch 'pci/resource' into nextBjorn Helgaas1-2/+6
* pci/resource: PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f) PCI: Add pci_resize_resource() for resizing BARs PCI: Add resizable BAR infrastructure PCI: Add PCI resource type mask #define
2017-11-14Merge branch 'pci/msi' into nextBjorn Helgaas1-0/+2
* pci/msi: PCI/portdrv: Compute MSI/MSI-X IRQ vectors after final allocation PCI/portdrv: Factor out Interrupt Message Number lookup PCI/portdrv: Consolidate comments PCI/portdrv: Add #defines for AER and DPC Interrupt Message Number masks
2017-11-14PCI/ASPM: Add L1 Substates definitionsBjorn Helgaas1-0/+6
Add and use #defines for L1 Substate register fields instead of hard-coding the masks. Also update comments to use names from the spec. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
2017-11-14PCI/ASPM: Reformat ASPM register definitionsBjorn Helgaas1-14/+14
Reformat register field definitions in the style used elsewhere and align comments with names used in the spec. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
2017-11-02License cleanup: add SPDX license identifier to uapi header files with no licenseGreg Kroah-Hartman1-0/+1
Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24PCI: Add resizable BAR infrastructureChristian König1-2/+6
Add resizable BAR infrastructure, including defines and helper functions to read the possible sizes of a BAR and update its size. See PCIe r3.1, sec 7.22. Link: https://pcisig.com/sites/default/files/specification_documents/ECN_Resizable-BAR_24Apr2008.pdf Signed-off-by: Christian König <christian.koenig@amd.com> [bhelgaas: rename to functions with "rebar" (to match #defines), drop shift #defines, drop "_MASK" suffixes, fix typos, fix kerneldoc] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-10-19PCI/portdrv: Add #defines for AER and DPC Interrupt Message Number masksDongdong Liu1-0/+2
In the AER case, the mask isn't strictly necessary because there are no higher-order bits above the Interrupt Message Number, but using a #define will make it possible to grep for it. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-09-07Merge branch 'pci/misc' into nextBjorn Helgaas1-2/+4
* pci/misc: PCI: Fix PCIe capability sizes PCI: Convert to using %pOF instead of full_name() PCI: Constify endpoint pci_epf_type device_type PCI: Constify bin_attribute structures PCI: Constify hotplug pci_device_id structures PCI: Constify hotplug attribute_group structures PCI: Constify label attribute_group structures PCI: Constify sysfs attribute_group structures
2017-09-07Merge branch 'pci/dpc' into nextBjorn Helgaas1-0/+10
* pci/dpc: PCI/DPC: Add local struct device pointers PCI/DPC: Add eDPC support
2017-08-31PCI/AER: Reformat AER register definitionsBjorn Helgaas1-16/+10
Reformat so comments fit on same line as definition. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-24PCI/DPC: Add eDPC supportDongdong Liu1-0/+10
Add eDPC support. Get and print the RP PIO error information when the trigger condition is RP PIO error. For more information on eDPC, please see PCI Express Base Specification Revision 3.1, section 6.2.10.3, or view the PCI-SIG eDPC ECN here: https://pcisig.com/sites/default/files/specification_documents/ECN_Enhanced_DPC_2012-11-19_final.pdf Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-08-24PCI: Fix PCIe capability sizesAlex Williamson1-2/+4
PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 defines the size of the PCIe capability structure for v1 devices with link, but we also have a need in the vfio code for sizing the capability for devices without link, such as Root Complex Integrated Endpoints. Create a separate define for this ending the structure before the link fields. Additionally, this reveals that PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 is currently incorrect, ending the capability length before the v2 link fields. Rename this to specify an RC Integrated Endpoint (no link) capability length and move PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 to include the link fields as we have for the v1 version. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> [bhelgaas: add "_" in "PCI_CAP_EXP_RC ENDPOINT_SIZEOF_V2 44"] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-06-19PCI: Add sysfs max_link_speed/width, current_link_speed/width, etcWong Vee Khee1-0/+1
Expose PCIe bridges attributes such as secondary bus number, subordinate bus number, max link speed and link width, current link speed and link width via sysfs in /sys/bus/pci/devices/... This information is available via lspci, but that requires root privilege. Signed-off-by: Wong Vee Khee <vee.khee.wong@ni.com> Signed-off-by: Hui Chun Ong <hui.chun.ong@ni.com> [bhelgaas: changelog, return errors early to unindent usual case, return errors with same style throughout] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-05-08Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+1
Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-04-28RDMA/qedr: properly check atomic capabilitiesAmrani, Ram1-0/+1
After checking the path upwards towards root complex, actualy check root complex atomic_req capability, and not our own NIC. Verify that the PCIe device control register's atomic egress block is cleared in the path. Verify that the PCIe version is at least 2. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-18PCI: Make PCI_ROM_ADDRESS_MASK a 32-bit constantMatthias Kaehlcke1-1/+1
A 64-bit value is not needed since a PCI ROM address consists in 32 bits. This fixes a clang warning about "implicit conversion from 'unsigned long' to 'u32'". Also remove now unnecessary casts to u32 from __pci_read_base() and pci_std_update_resource(). Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-15Merge branch 'pci/dpc' into nextBjorn Helgaas1-0/+1
* pci/dpc: PCI/DPC: Wait for Root Port busy to clear PCI/DPC: Decode extended reasons
2017-02-10PCI/ASPM: Add L1 substate capability structure register definitionsRajat Jain1-0/+16
Add L1 substate capability structure register definitions for use in subsequent patches. See the PCIe r3.1 spec, sec 7.33. [bhelgaas: add PCIe spec reference] Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-10PCI/DPC: Wait for Root Port busy to clearKeith Busch1-0/+1
Per PCIe r3.1, sec 6.2.10 and sec 7.13.4, on Root Ports that support "RP Extensions for DPC", When the DPC Trigger Status bit is Set and the DPC RP Busy bit is Set, software must leave the Root Port in DPC until the DPC RP Busy bit reads 0b. Wait up to 1 second for the Root Port to become non-busy. [bhelgaas: changelog, spec references] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI: Move config space size macros to pci_regs.hWang Sheng-Hui1-0/+8
Move PCI configuration space size macros (PCI_CFG_SPACE_SIZE and PCI_CFG_SPACE_EXP_SIZE) from drivers/pci/pci.h to include/uapi/linux/pci_regs.h so they can be used by more drivers and eliminate duplicate definitions. [bhelgaas: Expand comment to include PCI-X details] Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-14qedr: Add RoCE driver frameworkRam Amrani1-0/+3
Adds a skeletal implementation of the qed* RoCE driver - basically the ability to communicate with the qede driver and receive notifications from it regarding various init/exit events. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-25PCI: Add PTM clock granularity informationBjorn Helgaas1-0/+1
The PTM Control register (PCIe r3.1, sec 7.32.3) contains an Effective Granularity field: This provides information relating to the expected accuracy of the PTM clock, but does not otherwise affect the PTM mechanism. Set the Effective Granularity based on the PTM Root and any intervening PTM Time Sources. This does not set Effective Granularity for Root Complex Integrated Endpoints because I don't know how to figure out clock granularity for them. The spec says: ... system software must set [Effective Granularity] to the value reported in the Local Clock Granularity field by the associated PTM Time Source. but I don't know how to identify the associated PTM Time Source. Normally it's the upstream bridge, but an integrated endpoint has no upstream bridge. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-18PCI: Add pci_enable_ptm() for drivers to enable PTM on endpointsBjorn Helgaas1-0/+1
Add an pci_enable_ptm() interface so drivers can enable PTM. The PCI core enables PTM on PTM Roots and switches automatically, but we don't enable PTM on endpoints unless a driver requests it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-15PCI: Add Precision Time Measurement (PTM) supportJonathan Yong1-1/+9
Add Precision Time Measurement (PTM) support (see PCIe r3.1, sec 6.22). Enable PTM on PTM Root devices and switch ports. This does not enable PTM on endpoints. There currently are no PTM-capable devices on the market, but it is expected to be supported by the Intel Apollo Lake platform. [bhelgaas: complete rework] Signed-off-by: Jonathan Yong <jonathan.yong@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.