| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The hns_roce_ib_create_srq_resp is used to interact with the user for
data, this was open coded to use a u32 directly, instead use a properly
sized structure.
Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Since the IB_WR_REG_MR opcode value changed, let's set the PVRDMA device
opcodes explicitly.
Reported-by: Ruishuang Wang <ruishuangw@vmware.com>
Fixes: 9a59739bd01f ("IB/rxe: Revise the ib_wr_opcode enum")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Ruishuang Wang <ruishuangw@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add a method for query port under the uverbs global methods. Current
ib_port_attr struct is passed as a single attribute and port_cap_flags2 is
added as a new attribute to the function.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
port_cap_flags2 represents IBTA PortInfo:CapabilityMask2.
The field safely extends the RDMA_NLDEV_ATTR_CAP_FLAGS operand as it was
exported as 64 bit to allow this kind of extension.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add new ioctl method for the MR object - ADVISE_MR.
This command can be used by users to give an advice or directions to the
kernel about an address range that belongs to memory regions.
A new ib_device callback, advise_mr(), is introduced here to suupport the
new command. This command takes the following arguments:
- pd: The protection domain to which all memory regions belong
- advice: The type of the advice
* IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH - Pre-fetch a range of
an on-demand paging MR
* IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH_WRITE - Pre-fetch a range
of an on-demand paging MR with write intention
- flags: The properties of the advice
* IB_UVERBS_ADVISE_MR_FLAG_FLUSH - Operation must end before
return to the caller
- sg_list: The list of memory ranges
- num_sge: The number of memory ranges in the list
- attrs: More attributes to be parsed by the provider
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add an ioctl method to destroy the PD, MR, MW, AH, flow, RWQ indirection
table and XRCD objects by handle which doesn't require any output response
during destruction.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Introduce a helper function gather_objects_handle() to copy object handles
under a spin lock.
Expose these objects handles via the uverbs ioctl interface.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Now that the handlers do not process their own udata we can make a
sensible ioctl that wrappers them. The ioctl follows the same format as
the write_ex() and has the user explicitly specify the core and driver
in/out opaque structures and a command number.
This works for all forms of write commands.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Danit Goldberg says:
Packet based credit mode
Packet based credit mode is an alternative end-to-end credit mode for QPs
set during their creation. Credits are transported from the responder to
the requester to optimize the use of its receive resources. In
packet-based credit mode, credits are issued on a per packet basis.
The advantage of this feature comes while sending large RDMA messages
through switches that are short in memory.
The first commit exposes QP creation flag and the HCA capability. The
second commit adds support for a new DV QP creation flag. The last commit
report packet based credit mode capability via the MLX5DV device
capabilities.
* branch 'mlx5-packet-credit-fc':
IB/mlx5: Report packet based credit mode device capability
IB/mlx5: Add packet based credit mode support
net/mlx5: Expose packet based credit mode
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Report packet based credit mode capability via the mlx5 DV interface.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The device can support two credit modes, message based (default) and
packet based. In order to enable packet based mode, the QP should be
created with special flag that indicates this.
This patch adds support for the new DV QP creation flag that can be used
for RC QPs in order to change the credit mode.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The OPFN and TID RDMA capability bits are added to allow users to control
which feature is enabled and disabled.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch implements the SRQ(Share Receive Queue) verbs
and update the poll cq verbs to deal with SRQ complentions.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Allow a user to attach a DEVX counter via mlx5 raw flow creation. In order
to attach a counter we introduce a new attribute:
MLX5_IB_ATTR_CREATE_FLOW_ARR_COUNTERS_DEVX
A counter can be attached to multiple flow steering rules.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
If the struct is used with a driver_udata it should have a trailing
driver_data flex array to mark it as having udata.
In most cases this forces the end of the struct to be aligned to u64 which
is needed to make the trailing driver_data naturally aligned.
Unfortunately We have a few cases where the base struct is not aligned to
8 bytes, these are marked with a u32 driver_data and userspace will check
for alignment issues when it compiles the driver.
Also remove the empty ib_uverbs_modify_qp_resp as nothing uses this.
pahole says there is no change to any struct sizes by this change.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Requester scatter to CQE is restricted to QPs configured to signal
all WRs.
This patch adds ability to enable scatter to cqe (force enable)
in the requester without sig_all, for users who do not want all WRs
signaled but rather just the ones whose data found in the CQE.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Provide an option to rename IB device name through RDMA netlink and
limit it to users with ADMIN capability only.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A user can provide a hint which will be attached to the packet and written
to the CQE on receive. This can be used as a way to offload operations
into the HW, for example parsing a packet which is a tunneled packet, and
if so, pass 0x1 as the hint. The software can use that hint to decapsulate
the packet and parse only the inner headers thus saving CPU cycles.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Expose RAW QP device handles to user space by extending the UHW part of
mlx5_ib_create_qp_resp.
This data is returned only when DEVX context is used where it may be
applicable.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
For dependencies, branch based on 'mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
mlx5 mcast/ucast loopback control enhancements from Leon Romanovsky:
====================
This is short series from Mark which extends handling of loopback
traffic. Originally mlx5 IB dynamically enabled/disabled both unicast
and multicast based on number of users. However RAW ethernet QPs need
more granular access.
====================
Fixed failed automerge in mlx5_ib.h (minor context conflict issue)
mlx5-vport-loopback branch:
RDMA/mlx5: Enable vport loopback when user context or QP mandate
RDMA/mlx5: Allow creating RAW ethernet QP with loopback support
RDMA/mlx5: Refactor transport domain bookkeeping logic
net/mlx5: Rename incorrect naming in IFC file
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Expose two new flags:
MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC
MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC
Those flags can be used at creation time in order to allow a QP
to be able to receive loopback traffic (unicast and multicast).
We store the state in the QP to be used on the destroy path
to indicate with which flags the QP was created with.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This enum has become part of the uABI, as both RXE and the
ib_uverbs_post_send() command expect userspace to supply values from this
enum. So it should be properly placed in include/uapi/rdma.
In userspace this enum is called 'enum ibv_wr_opcode' as part of
libibverbs.h. That enum defines different values for IB_WR_LOCAL_INV,
IB_WR_SEND_WITH_INV, and IB_WR_LSO. These were introduced (incorrectly, it
turns out) into libiberbs in 2015.
The kernel has changed its mind on the numbering for several of the IB_WC
values over the years, but has remained stable on IB_WR_LOCAL_INV and
below.
Based on this we can conclude that there is no real user space user of the
values beyond IB_WR_ATOMIC_FETCH_AND_ADD, as they have never worked via
rdma-core. This is confirmed by inspection, only rxe uses the kernel enum
and implements the latter operations. rxe has clearly never worked with
these attributes from userspace. Other drivers that support these opcodes
implement the functionality without calling out to the kernel.
To make IB_WR_SEND_WITH_INV and related work for RXE in userspace we
choose to renumber the IB_WR enum in the kernel to match the uABI that
userspace has bee using since before Soft RoCE was merged. This is an
overall simpler configuration for the whole software stack, and obviously
can't break anything existing.
Reported-by: Seth Howell <seth.howell@intel.com>
Tested-by: Seth Howell <seth.howell@intel.com>
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Currently a matcher can only be created and attached to a NIC RX flow
table. Extend it to allow it on NIC TX flow tables as well.
In order to achieve that, we:
1) Expose a new attribute: MLX5_IB_ATTR_FLOW_MATCHER_FLOW_FLAGS.
enum ib_flow_flags is used as valid flags. Only
IB_FLOW_ATTR_FLAGS_EGRESS is supported.
2) Remove the requirement to have a DEVX or QP destination when creating a
flow. A flow added to NIC TX flow table will forward the packet outside
of the vport (Wire or E-Switch in the SR-iOV case).
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Support attaching flow actions to a flow rule via raw create flow.
For now only NIC RX path is supported. This change requires to export
flow resources management functions so we can maintain proper bookkeeping
of flow actions.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Methods sometimes need to get a flexible set of IDRs and not a strict set
as can be achieved today by the conventional IDR attribute. Add a new
IDRS_ARRAY attribute to the generic uverbs ioctl layer.
IDRS_ARRAY points to array of idrs of the same object type and same access
rights, only write and read are supported.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>``
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
We expose new actions:
L2_TO_L2_TUNNEL - A generic encap from L2 to L2, the data passed should
be the encapsulating headers.
L3_TUNNEL_TO_L2 - Will do decap where the inner packet starts from L3,
the data should be mac or mac + vlan (14 or 18 bytes).
L2_TO_L3_TUNNEL - Will do encap where is L2 of the original packet will
not be included, the data should be the encapsulating
header.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
For now, only add L2_TUNNEL_TO_L2 option. This will allow to perform
generic decap operation if the encapsulating protocol is L2 based, and the
inner packet is also L2 based. For example this can be used to decap VXLAN
packets.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Expose the ability to create a flow action which changes packet
headers. The data passed from userspace should be modify header actions as
defined by HW specification.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch adds support for SRQ's created in user space and update
qedr_affiliated_event to deal with general SRQ events.
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Yuval Bason <yuval.bason@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adds iw_cxgb4 functionality to support RDMA_WRITE_WITH_IMMEDATE opcode.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
According to IB protocol, there are some cases that work requests must
return the flush error completion status through the completion queue. Due
to hardware limitation, the driver needs to assist the flush process.
This patch adds the support of flush cqe for hip08 in the cases that
needed, such as poll cqe, post send, post recv and aeqe handle.
The patch also considered the compatibility between kernel and user space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch adds kernel mode t4_srq structures and support functions,
uapi structures and defines, as well as firmware work request structures.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Our ABI for write() uses a s32 for FDs and a u32 for IDRs, but internally
we ended up implicitly casting these ABI values into an 'int'. For ioctl()
we use a s64 for FDs and a u64 for IDRs, again casting to an int.
The various casts to int are all missing range checks which can cause
userspace values that should be considered invalid to be accepted.
Fix this by making the generic lookup routine accept a s64, which does not
truncate the write API's u32/s32 or the ioctl API's s64. Then push the
detailed range checking down to the actual type implementations to be
shared by both interfaces.
Finally, change the copy of the uobj->id to sign extend into a s64, so eg,
if we ever wish to return a negative value for a FD it is carried
properly.
This ensures that userspace values are never weirdly interpreted due to
the various trunctations and everything that is really out of range gets
an EINVAL.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Introduce driver create and destroy flow methods on the uverbs flow
object.
This allows the driver to get its specific device attributes to match the
underlay specification while still using the generic ib_flow object for
cleanup and code sharing.
The IB object's attributes are set via the ib_set_flow() helper function.
The specific implementation for the given specification is added in
downstream patches.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Introduce flow steering matcher object and its create and destroy methods.
This matcher object holds some mlx5 specific driver properties that
matches the underlay device specification when an mlx5 flow steering group
is created.
It will be used in downstream patches to be part of mlx5 specific create
flow method.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
These constants are used in the ioctl interface so they are part of the
uapi, place them in the correct header for clarity.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
|
|
This patch adds support for iw_cxb4 to extend cqes from existing 32Byte
size to 64Byte.
Also includes adds backward compatibility support (for 32Byte) to work
with older libraries.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Userspace also needs to know if the port requires GRHs to properly form
the AVs it creates.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
The internal flag IP_BASED_GIDS was added to a field that was being used
to hold the port Info CapabilityMask without considering the effects this
will have. Since most drivers just use the value from the HW MAD it means
IP_BASED_GIDS will also become set on any HW that sets the IBA flag
IsOtherLocalChangesNoticeSupported - which is not intended.
Fix this by keeping port_cap_flags only for the IBA CapabilityMask value
and store unrelated flags externally. Move the bit definitions for this to
ib_mad.h to make it clear what is happening.
To keep the uAPI unchanged define a new set of flags in the uapi header
that are only used by ib_uverbs_query_port_resp.port_cap_flags which match
the current flags supported in rdma-core, and the values exposed by the
current kernel.
Fixes: b4a26a27287a ("IB: Report using RoCE IP based gids in port caps")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Two methods are sharing the same attribute constant, but the attribute
definitions are not the same. This should not have been done, instead
split them into two attributes with the same number.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
For dependencies, branch based on 'mellanox/mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
Pull Dump and fill MKEY from Leon Romanovsky:
====================
MLX5 IB HCA offers the memory key, dump_fill_mkey to increase performance,
when used in a send or receive operations.
It is used to force local HCA operations to skip the PCI bus access, while
keeping track of the processed length in the ibv_sge handling.
In this three patch series, we expose various bits in our HW spec
file (mlx5_ifc.h), move unneeded for mlx5_core FW command and export such
memory key to user space thought our mlx5-abi header file.
====================
Botched auto-merge in mlx5_ib_alloc_ucontext() resolved by hand.
* branch 'mlx5-dump-fill-mkey':
IB/mlx5: Expose dump and fill memory key
net/mlx5: Add hardware definitions for dump_fill_mkey
net/mlx5: Limit scope of dump_fill_mkey function
net/mlx5: Rate limit errors in command interface
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
MLX5 IB HCA offers the memory key, dump_fill_mkey to boost
performance, when used in a send or receive operations.
It is used to force local HCA operations to skip the PCI bus access,
while keeping track of the processed length in the ibv_sge handling.
Meaning, instead of a PCI write access the HCA leaves the target
memory untouched, and skips filling that packet section. Similar
behavior is done upon send, the HCA skips data in memory relevant
to this key and saves PCI bus access.
This functionality saves PCI read/write operations.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Return the matching device EQN for a given user vector number via the
DEVX interface.
Note:
EQs are owned by the kernel and shared by all user processes.
Basically, a user CQ can point to any EQ.
The kernel doesn't enforce any such limitation today either.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add support to register a memory with the firmware via the DEVX
interface.
The driver translates a given user address to ib_umem then it will
register the physical addresses with the firmware and get a unique id
for this registration to be used for this virtual address.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Return a device UAR index for a given user index via the DEVX interface.
Security note:
The hardware protection mechanism works like this: Each device object that
is subject to UAR doorbells (QP/SQ/CQ) gets a UAR ID (called uar_page in
the device specification manual) upon its creation. Then upon doorbell,
hardware fetches the object context for which the doorbell was rang, and
validates that the UAR through which the DB was rang matches the UAR ID
of the object.
If no match the doorbell is silently ignored by the hardware. Of
course, the user cannot ring a doorbell on a UAR that was not mapped to
it.
Now in devx, as the devx kernel does not manipulate the QP/SQ/CQ command
mailboxes (except tagging them with UID), we expose to the user its UAR
ID, so it can embed it in these objects in the expected specification
format. So the only thing the user can do is hurt itself by creating a
QP/SQ/CQ with a UAR ID other than his, and then in this case other users
may ring a doorbell on its objects.
The consequence of that will be that another user can schedule a QP/SQ
of the buggy user for execution (just insert it to the hardware schedule
queue or arm its CQ for event generation), no further harm is expected.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add support in DEVX for modify and query commands, the required lock is
taken (i.e. READ/WRITE) by the KABI infrastructure accordingly.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add support to create and destroy firmware objects via the DEVX
interface.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add support to run general firmware command via the DEVX interface.
A command that works on some object (e.g. CQ, WQ, etc.) will be added
in next patches while maintaining the required object lock.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Introduce DEVX to enable direct device commands in downstream patches
from this series.
In that mode of work the firmware manages the isolation between
processes' resources and as such a DEVX user id is created and assigned
to the given user context upon allocation request.
A capability check is done to make sure that this feature is really
supported by the firmware prior to creating the DEVX user id.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull verbs counters series from Leon Romanovsky:
====================
Verbs flow counters support
This series comes to allow user space applications to monitor real time
traffic activity and events of the verbs objects it manages, e.g.: ibv_qp,
ibv_wq, ibv_flow.
The API enables generic counters creation and define mapping to
association with a verbs object, the current mlx5 driver is using this API
for flow counters.
With this API, an application can monitor the entire life cycle of object
activity, defined here as a static counters attachment. This API also
allows dynamic counters monitoring of measurement points for a partial
period in the verbs object life cycle.
In addition it presents the implementation of the generic counters
interface.
This will be achieved by extending flow creation by adding a new flow
count specification type which allows the user to associate a previously
created flow counters using the generic verbs counters interface to the
created flow, once associated the user could read statistics by using the
read function of the generic counters interface.
The API includes:
1. create and destroyed API of a new counters objects
2. read the counters values from HW
Note:
Attaching API to allow application to define the measurement points per
objects is a user space only API and this data is passed to kernel when
the counted object (e.g. flow) is created with the counters object.
===================
* tag 'verbs_flow_counters':
IB/mlx5: Add counters read support
IB/mlx5: Add flow counters read support
IB/mlx5: Add flow counters binding support
IB/mlx5: Add counters create and destroy support
IB/uverbs: Add support for flow counters
IB/core: Add support for flow counters
IB/core: Support passing uhw for create_flow
IB/uverbs: Add read counters support
IB/core: Introduce counters read verb
IB/uverbs: Add create/destroy counters support
IB/core: Introduce counters object and its create/destroy
IB/uverbs: Add an ib_uobject getter to ioctl() infrastructure
net/mlx5: Export flow counter related API
net/mlx5: Use flow counter pointer as input to the query function
|
Lijun Ou
Adit Ranadive
Michael Guralnik
Moni Shoua
Parav Pandit
Jason Gunthorpe
Danit Goldberg
Kaike Wan
Mark Bloch
Yonatan Cohen
Leon Romanovsky
Yishai Hadas
Doug Ledford
Guy Levi
Yuval Bason
Potnuri Bharat Teja
Yixian Liu
Raju Rangoju
Artemy Kovalyov