aboutsummaryrefslogtreecommitdiffstats
path: root/include/uapi
AgeCommit message (Collapse)AuthorFilesLines
2020-12-01net/smc: Add support for obtaining SMCR device listGuvenc Gulce1-2/+11
Deliver SMCR device information via netlink based diagnostic interface. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net/smc: Add support for obtaining SMCD device listGuvenc Gulce1-0/+28
Deliver SMCD device information via netlink based diagnostic interface. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net/smc: Add SMC-D Linkgroup diagnostic supportGuvenc Gulce1-0/+27
Deliver SMCD Linkgroup information via netlink based diagnostic interface. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net/smc: Introduce SMCR get link commandGuvenc Gulce1-0/+18
Introduce get link command which loops through all available links of all available link groups. It uses the SMC-R linkgroup list as entry point, not the socket list, which makes linkgroup diagnosis possible, in case linkgroup does not contain active connections anymore. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net/smc: Introduce SMCR get linkgroup commandGuvenc Gulce1-0/+15
Introduce get linkgroup command which loops through all available SMCR linkgroups. It uses the SMC-R linkgroup list as entry point, not the socket list, which makes linkgroup diagnosis possible, in case linkgroup does not contain active connections anymore. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net/smc: Add support for obtaining system informationGuvenc Gulce1-0/+18
Add new netlink command to obtain system information of the smc module. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net/smc: Introduce generic netlink interface for diagnostic purposesGuvenc Gulce1-0/+11
Introduce generic netlink interface infrastructure to expose the diagnostic information regarding smc linkgroups, links and devices. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01Merge tag 'v5.10-rc6' into rdma.git for-nextJason Gunthorpe2-0/+4
For dependencies in following patches Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-01Merge tag 'v5.10-rc6' into patchworkMauro Carvalho Chehab9-365/+73
Linux 5.10-rc6 * tag 'v5.10-rc6': (1815 commits) Linux 5.10-rc6 sock: set sk_err to ee_errno on dequeue from errq mptcp: fix NULL ptr dereference on bad MPJ net: openvswitch: fix TTL decrement action netlink message format perf probe: Change function definition check due to broken DWARF perf probe: Fix to die_entrypc() returns error correctly perf stat: Use proper cpu for shadow stats perf record: Synthesize cgroup events only if needed perf diff: Fix error return value in __cmd_diff() perf tools: Update copy of libbpf's hashmap.c x86/mce: Do not overwrite no_way_out if mce_end() fails kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT KVM: x86: Fix split-irqchip vs interrupt injection window request KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint usb: typec: stusb160x: fix power-opmode property with typec-power-opmode printk: finalize records with trailing newlines can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0 can: m_can: fix nominal bitiming tseg2 min for version >= 3.1 can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags ...
2020-12-01net: Add SO_BUSY_POLL_BUDGET socket optionBjörn Töpel1-0/+1
This option lets a user set a per socket NAPI budget for busy-polling. If the options is not set, it will use the default of 8. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20201130185205.196029-3-bjorn.topel@gmail.com
2020-12-01net: Introduce preferred busy-pollingBjörn Töpel1-0/+2
The existing busy-polling mode, enabled by the SO_BUSY_POLL socket option or system-wide using the /proc/sys/net/core/busy_read knob, is an opportunistic. That means that if the NAPI context is not scheduled, it will poll it. If, after busy-polling, the budget is exceeded the busy-polling logic will schedule the NAPI onto the regular softirq handling. One implication of the behavior above is that a busy/heavy loaded NAPI context will never enter/allow for busy-polling. Some applications prefer that most NAPI processing would be done by busy-polling. This series adds a new socket option, SO_PREFER_BUSY_POLL, that works in concert with the napi_defer_hard_irqs and gro_flush_timeout knobs. The napi_defer_hard_irqs and gro_flush_timeout knobs were introduced in commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature"), and allows for a user to defer interrupts to be enabled and instead schedule the NAPI context from a watchdog timer. When a user enables the SO_PREFER_BUSY_POLL, again with the other knobs enabled, and the NAPI context is being processed by a softirq, the softirq NAPI processing will exit early to allow the busy-polling to be performed. If the application stops performing busy-polling via a system call, the watchdog timer defined by gro_flush_timeout will timeout, and regular softirq handling will resume. In summary; Heavy traffic applications that prefer busy-polling over softirq processing should use this option. Example usage: $ echo 2 | sudo tee /sys/class/net/ens785f1/napi_defer_hard_irqs $ echo 200000 | sudo tee /sys/class/net/ens785f1/gro_flush_timeout Note that the timeout should be larger than the userspace processing window, otherwise the watchdog will timeout and fall back to regular softirq processing. Enable the SO_BUSY_POLL/SO_PREFER_BUSY_POLL options on your socket. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20201130185205.196029-2-bjorn.topel@gmail.com
2020-11-30habanalabs: Add CB IOCTL opcode to retrieve CB informationTomer Tayar1-2/+13
Add a new CB IOCTL opcode that enables a user to query about a CB and get its usage count. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: add support for cs with timestampOfir Bitton1-1/+5
add support for user to request a timestamp upon cs completion. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: indicate to user that a cs is goneOfir Bitton1-1/+4
We want to indicate to the user that a certain command submission is finished long time ago and it is no longer in database. This means no further information regarding this cs can be obtained. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: fetch pll frequency from firmwareAlon Mizrahi1-0/+9
Once firmware security is enabled, driver must fetch pll frequencies through the firmware message interface instead of reading the registers directly. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: add 'needs reset' state in driverOfir Bitton1-1/+2
The new state indicates that device should be reset in order to re-gain funcionality. This unique state can occur if reset_on_lockup is disabled and an actual lockup has occurred. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: fix cs counters structurefarah kassabri1-15/+20
Fix cs counters structure in uapi to be one flat structure instead of two instances of the same other structure. use atomic read/increment for context counters so we could use one structure for both aggregated and context counters. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: sync stream collective supportOfir Bitton1-2/+12
Implement sync stream collective for GAUDI. Need to allocate additional resources for that and add ctx_fini() to clean up those resources. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs/gaudi: Set DMA5 QMAN internalOfir Bitton1-6/+6
DMA5 QMAN is designated to be used for reduction process, hence it will be no longer configured as external queue. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: sync stream collective infrastructureOfir Bitton1-4/+13
Define new API for collective wait support and modify sync stream common flow. In addition add kernel CB allocation support for internal queues. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: use enum for CB allocation optionsTal Cohen1-0/+16
In the future there will be situations where queues can accept either kernel allocated CBs or user allocated CBs, depending on different states. Therefore, instead of using a boolean variable of kernel/user allocated CB, we need to use a bitmask to indicate that, which will allow to combine the two options. Add a flag to the uapi so the user will be able to indicate whether the CB was allocated by kernel or by user. Of course the driver validates that. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-0/+4
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/tls: add CHACHA20-POLY1305 specific defines and structuresVadim Fedorenko1-0/+15
To provide support for ChaCha-Poly cipher we need to define specific constants and structures. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net: openvswitch: fix TTL decrement action netlink message formatEelco Chaudron1-0/+2
Currently, the openvswitch module is not accepting the correctly formated netlink message for the TTL decrement action. For both setting and getting the dec_ttl action, the actions should be nested in the OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi. When the original patch was sent, it was tested with a private OVS userspace implementation. This implementation was unfortunately not upstreamed and reviewed, hence an erroneous version of this patch was sent out. Leaving the patch as-is would cause problems as the kernel module could interpret additional attributes as actions and vice-versa, due to the actions not being encapsulated/nested within the actual attribute, but being concatinated after it. Fixes: 744676e77720 ("openvswitch: add TTL decrement action") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27HID: hidraw: Add additional hidraw input/output report ioctls.Dean Camera1-0/+6
Currently the hidraw module can only read and write feature HID reports on demand, via dedicated ioctls. Input reports are read from the device through the read() interface, while output reports are written through the write interface(). This is insufficient; it is desirable in many situations to be able to read and write input and output reports through the control interface to cover additional scenarios: - Reading an input report by its report ID, to get initial state - Writing an input report, to set initial input state in the device - Reading an output report by its report ID, to obtain current state - Writing an output report by its report ID, out of band This patch adds these missing ioctl requests to read and write the remaining HID report types. Note that not all HID backends will neccesarily support this (e.g. while the USB link layer supports setting Input reports, others may not). Also included are documentation and example updates. The current hidraw documentation states that feature reports read from the device does *not* include the report ID, however this is not the case and the returned report will have its report ID prepended by conforming HID devices, as the report data sent from the device over the control endpoint must be indentical in format to those sent over the regular transport. Signed-off-by: Dean Camera <dean@fourwalledcubicle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-27Merge branch 'linus' into sched/core, to resolve semantic conflictIngo Molnar7-365/+69
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-11-26net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bitsMuhammad Sammar1-1/+1
Add misc4 match params to enable matching on prog_sample_fields. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26media: rc: improve LIRC documentationMauro Carvalho Chehab1-1/+1
Add documentation for enum rc_proto and struct lirc_scancode at the generated docs. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sean Young <sean@mess.org>
2020-11-26Merge remote-tracking branch 'origin/master' into perf/corePeter Zijlstra89-540/+2856
Further perf/core patches will depend on: d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding") which is already in Linus' tree.
2020-11-26bpf: Add a BPF helper for getting the IMA hash of an inodeKP Singh1-0/+11
Provide a wrapper function to get the IMA hash of an inode. This helper is useful in fingerprinting files (e.g executables on execution) and using these fingerprints in detections like an executable unlinking itself. Since the ima_inode_hash can sleep, it's only allowed for sleepable LSM hooks. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201124151210.1081188-3-kpsingh@chromium.org
2020-11-25bridge: mrp: Implement LC mode for MRPHoratiu Vultur1-0/+1
Extend MRP to support LC mode(link check) for the interconnect port. This applies only to the interconnect ring. Opposite to RC mode(ring check) the LC mode is using CFM frames to detect when the link goes up or down and based on that the userspace will need to react. One advantage of the LC mode over RC mode is that there will be fewer frames in the normal rings. Because RC mode generates InTest on all ports while LC mode sends CFM frame only on the interconnect port. All 4 nodes part of the interconnect ring needs to have the same mode. And it is not possible to have running LC and RC mode at the same time on a node. Whenever the MIM starts it needs to detect the status of the other 3 nodes in the interconnect ring so it would send a frame called InLinkStatus, on which the clients needs to reply with their link status. This patch adds InLinkStatus frame type and extends existing rules on how to forward this frame. Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20201124082525.273820-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25net: sched: alias action flags with TCA_ACT_ prefixVlad Buslov1-5/+7
Currently both filter and action flags use same "TCA_" prefix which makes them hard to distinguish to code and confusing for users. Create aliases for existing action flags constants with "TCA_ACT_" prefix. Signed-off-by: Vlad Buslov <vlad@buslov.dev> Link: https://lore.kernel.org/r/20201124164054.893168-1-vlad@buslov.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25media: lirc: ensure RC_PROTO_MAX has documentationSean Young1-0/+1
The enum rc_proto value RC_PROTO_MAX has no documentation, this is causing a warning while building the documentation. Fixes: 72e637fec558 ("media: rc: validate that "rc_proto" is reasonable") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-25ASoC: SOF: Add `memory_info` file to debugfsKarol Trzcinski1-1/+1
This file content describes memory allocation status at run-time, typically to detect memory leaks. Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20201124180017.2232128-5-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-24devlink: Fix reload stats structureMoshe Shemesh1-0/+2
Fix reload stats structure exposed to the user. Change stats structure hierarchy to have the reload action as a parent of the stat entry and then stat entry includes value per limit. This will also help to avoid string concatenation on iproute2 output. Reload stats structure before this fix: "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 } } After this fix: "stats": { "reload": { "driver_reinit": { "unspecified": 2 }, "fw_activate": { "unspecified": 1, "no_reset": 0 } } Fixes: a254c264267e ("devlink: Add reload stats") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/1606109785-25197-1-git-send-email-moshe@mellanox.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24rpmsg: Introduce __rpmsg{16|32|64} typesMathieu Poirier1-0/+11
Introduce __rpmsg{16|32|64} types along with byte order conversion functions based on an rpmsg_device operation as a foundation to make RPMSG modular and transport agnostic. Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201120214245.172963-2-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23fs-verity: move structs needed for file signing to UAPI headerEric Biggers1-0/+49
Although it isn't used directly by the ioctls, "struct fsverity_descriptor" is required by userspace programs that need to compute fs-verity file digests in a standalone way. Therefore it's also needed to sign files in a standalone way. Similarly, "struct fsverity_formatted_digest" (previously called "struct fsverity_signed_digest" which was misleading) is also needed to sign files if the built-in signature verification is being used. Therefore, move these structs to the UAPI header. While doing this, try to make it clear that the signature-related fields in fsverity_descriptor aren't used in the file digest computation. Acked-by: Luca Boccassi <luca.boccassi@microsoft.com> Link: https://lore.kernel.org/r/20201113211918.71883-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-23Merge tag 'v5.10-rc5' into rdma.git for-nextJason Gunthorpe1-52/+54
For dependencies in following patches Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-23signal: define the SA_EXPOSE_TAGBITS bit in sa_flagsPeter Collingbourne1-0/+3
Architectures that support address tagging, such as arm64, may want to expose fault address tag bits to the signal handler to help diagnose memory errors. However, these bits have not been previously set, and their presence may confuse unaware user applications. Therefore, introduce a SA_EXPOSE_TAGBITS flag bit in sa_flags that a signal handler may use to explicitly request that the bits are set. The generic signal handler APIs expect to receive tagged addresses. Architectures may specify how to untag addresses in the case where SA_EXPOSE_TAGBITS is clear by defining the arch_untagged_si_addr function. Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Link: https://linux-review.googlesource.com/id/I16dd0ed2081f091fce97be0190cb8caa874c26cb Link: https://lkml.kernel.org/r/13cf24d00ebdd8e1f55caf1821c7c29d54100191.1605904350.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23signal: define the SA_UNSUPPORTED bit in sa_flagsPeter Collingbourne1-0/+7
Define a sa_flags bit, SA_UNSUPPORTED, which will never be supported in the uapi. The purpose of this flag bit is to allow userspace to distinguish an old kernel that does not clear unknown sa_flags bits from a kernel that supports every flag bit. In other words, if userspace does something like: act.sa_flags |= SA_UNSUPPORTED; sigaction(SIGSEGV, &act, 0); sigaction(SIGSEGV, 0, &oldact); and finds that SA_UNSUPPORTED remains set in oldact.sa_flags, it means that the kernel cannot be trusted to have cleared unknown flag bits from sa_flags, so no assumptions about flag bit support can be made. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ic2501ad150a3a79c1cf27fb8c99be342e9dffbcb Link: https://lkml.kernel.org/r/bda7ddff8895a9bc4ffc5f3cf3d4d37a32118077.1605582887.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23arch: provide better documentation for the arch-specific SA_* flagsPeter Collingbourne1-8/+14
Instead of documenting the arch-specific flag values in a comment at the top where they may be easily overlooked, document them in comments inline with the definitions in numerical order so that it is clear why specific values must be chosen for new generic flags and to reduce the likelihood of conflicts between generic and arch-specific flags. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I40a129cf7c3a71ba1bfd6d936c544072ee3b7ce6 Link: https://lkml.kernel.org/r/198c8b68c76bf3ed73117d817c7cdf9bc0eb174f.1605582887.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23arch: move SA_* definitions to generic headersPeter Collingbourne2-29/+47
Most architectures with the exception of alpha, mips, parisc and sparc use the same values for these flags. Move their definitions into asm-generic/signal-defs.h and allow the architectures with non-standard values to override them. Also, document the non-standard flag values in order to make it easier to add new generic flags in the future. A consequence of this change is that on powerpc and x86, the constants' values aside from SA_RESETHAND change signedness from unsigned to signed. This is not expected to impact realistic use of these constants. In particular the typical use of the constants where they are or'ed together and assigned to sa_flags (or another int variable) would not be affected. Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528 Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23io_uring: add support for shutdown(2)Jens Axboe1-0/+1
This adds support for the shutdown(2) system call, which is useful for dealing with sockets. shutdown(2) may block, so we have to punt it to async context. Suggested-by: Norman Maurer <norman.maurer@googlemail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-23Merge 5.10-rc5 into tty-nextGreg Kroah-Hartman1-52/+54
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-20PCI: Decode PCIe 64 GT/s link speedGustavo Pimentel1-0/+4
PCIe r6.0, sec 7.5.3.18, defines a new 64.0 GT/s bit in the Supported Link Speeds Vector of Link Capabilities 2. This patch does not affect the speed of the link, which should be negotiated automatically by the hardware; it only adds decoding when showing the speed to the user. Decode this new speed. Previously, reading the speed of a link operating at this speed showed "Unknown speed" instead of "64.0 GT/s". Link: https://lore.kernel.org/r/aaaab33fe18975e123a84aebce2adb85f44e2bbe.1605739760.git.gustavo.pimentel@synopsys.com Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2020-11-20can: gw: support modification of Classical CAN DLCsOliver Hartkopp1-2/+2
Add support for data length code modifications for Classical CAN. The netlink configuration interface always allowed to pass any value that fits into a byte, therefore only the modification process had to be extended to handle the raw DLC represenation of Classical CAN frames. When a DLC value from 0 .. F is provided for Classical CAN frame modifications the 'len' value is modified as-is with the exception that potentially existing 9 .. F DLC values in the len8_dlc element are moved to the 'len' element for the modification operation by mod_retrieve_ccdlc(). After the modification the Classical CAN frame DLC information is brought back into the correct format by mod_store_ccdlc() which is filling 'len' and 'len8_dlc' accordingly. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201119084921.2621-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20drm: document drm_mode_modeinfoSimon Ser1-0/+21
This allows `struct drm_mode_modeinfo` references to be linkified. Some descriptions are borrowed from struct drm_display_mode. Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/BBtyuxgs3DvcrMtbRyb7KBEWUviGy1dtWO61eB4@cp3-web-016.plabs.ch
2020-11-20drm: document drm_mode_get_connectorSimon Ser1-5/+73
Document how to perform a GETCONNECTOR ioctl. Document the various struct fields. Also document how to perform a forced probe, and when should user-space do it. Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Pekka Paalanen <ppaalanen@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/4NxrTtynzPiPX4SOCzxmA1sRB8fVLfeiabVpi5j3Y@cp7-web-041.plabs.ch
2020-11-20virtio-gpu api: Add a comment on VIRTIO_GPU_SHM_ID_HOST_VISIBLEAnthoine Bourgeois1-0/+4
This provides a description of how the kernel driver uses the shmid to determine capabilities. Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-3-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-20can: add optional DLC element to Classical CAN frame structureOliver Hartkopp2-14/+25
ISO 11898-1 Chapter 8.4.2.3 defines a 4 bit data length code (DLC) table which maps the DLC to the payload length of the CAN frame in bytes: DLC -> payload length 0 .. 8 -> 0 .. 8 9 .. 15 -> 8 Although the DLC values 8 .. 15 in Classical CAN always result in a payload length of 8 bytes these DLC values are transparently transmitted on the CAN bus. As the struct can_frame only provides a 'len' element (formerly 'can_dlc') which contains the plain payload length ( 0 .. 8 ) of the CAN frame, the raw DLC is not visible to the application programmer, e.g. for testing use-cases. To access the raw DLC values 9 .. 15 the len8_dlc element is introduced, which is only valid when the payload length 'len' is 8 and the DLC is greater than 8. The len8_dlc element is filled by the CAN interface driver and used for CAN frame creation by the CAN driver when the CAN_CTRLMODE_CC_LEN8_DLC flag is supported by the driver and enabled via netlink configuration interface. Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201110101852.1973-2-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.