| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For a long time, if a guest accessed memory outside of a memslot using
any of the load/store instructions in the architecture which doesn't
supply decoding information in the ESR_EL2 (the ISV bit is not set), the
kernel would print the following message and terminate the VM as a
result of returning -ENOSYS to userspace:
load/store instruction decoding not implemented
The reason behind this message is that KVM assumes that all accesses
outside a memslot is an MMIO access which should be handled by
userspace, and we originally expected to eventually implement some sort
of decoding of load/store instructions where the ISV bit was not set.
However, it turns out that many of the instructions which don't provide
decoding information on abort are not safe to use for MMIO accesses, and
the remaining few that would potentially make sense to use on MMIO
accesses, such as those with register writeback, are not used in
practice. It also turns out that fetching an instruction from guest
memory can be a pretty horrible affair, involving stopping all CPUs on
SMP systems, handling multiple corner cases of address translation in
software, and more. It doesn't appear likely that we'll ever implement
this in the kernel.
What is much more common is that a user has misconfigured his/her guest
and is actually not accessing an MMIO region, but just hitting some
random hole in the IPA space. In this scenario, the error message above
is almost misleading and has led to a great deal of confusion over the
years.
It is, nevertheless, ABI to userspace, and we therefore need to
introduce a new capability that userspace explicitly enables to change
behavior.
This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV)
which does exactly that, and introduces a new exit reason to report the
event to userspace. User space can then emulate an exception to the
guest, restart the guest, suspend the guest, or take any other
appropriate action as per the policy of the running system.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add this new V4L2_DEC_CMD_FLUSH decoder command and document it.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This patch adds support for the V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF
flag.
It also adds a new V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF
capability.
Drivers should set vb2_queue->subsystem_flags to
VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF to indicate support
for this flag.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
When calling the KVM_SET_GUEST_DEBUG ioctl, userspace might request
the next instruction to be single stepped via the
KVM_GUESTDBG_SINGLESTEP control bit of the kvm_guest_debug structure.
This patch adds the KVM_CAP_PPC_GUEST_DEBUG_SSTEP capability in order
to inform userspace about the state of single stepping support.
We currently don't have support for guest single stepping implemented
in Book3S HV so the capability is only present for Book3S PR and
BookE.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Several cases of overlapping changes which were for the most
part trivially resolvable.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1<<31 is undefined because it's a signed int and C is terrible.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018175041.613780-1-ajax@redhat.com
|
|
user space needs a flexiable query ability.
So that umd can get last signaled or submitted point.
v2:
add sanitizer checking.
v3:
rebase
Change-Id: I6512b430524ebabe715e602a2bf5abb0a7e780ea
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Christian König <Christian.Koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/series/64044/
|
|
Fix 'enum rdma_driver_id' to preserve other driver values before that
RDMA_DRIVER_CXGB3 was deleted. As this value is UAPI we can't affect
other values as of a deletion of one driver id.
Fixes: 30e0f6cf5acb ("RDMA/iw_cxgb3: Remove the iw_cxgb3 module from kernel")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191015075419.18185-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Introduce new helper that reuses existing skb perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct sk_buff *' as tracepoint argument or
can walk other kernel data structures to skb pointer.
In order to do that teach verifier to resolve true C types
of bpf helpers into in-kernel BTF ids.
The type of kernel pointer passed by raw tracepoint into bpf
program will be tracked by the verifier all the way until
it's passed into helper function.
For example:
kfree_skb() kernel function calls trace_kfree_skb(skb, loc);
bpf programs receives that skb pointer and may eventually
pass it into bpf_skb_output() bpf helper which in-kernel is
implemented via bpf_skb_event_output() kernel function.
Its first argument in the kernel is 'struct sk_buff *'.
The verifier makes sure that types match all the way.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-11-ast@kernel.org
|
|
Add attach_btf_id attribute to prog_load command.
It's similar to existing expected_attach_type attribute which is
used in several cgroup based program types.
Unfortunately expected_attach_type is ignored for
tracing programs and cannot be reused for new purpose.
Hence introduce attach_btf_id to verify bpf programs against
given in-kernel BTF type id at load time.
It is strictly checked to be valid for raw_tp programs only.
In a later patches it will become:
btf_id == 0 semantics of existing raw_tp progs.
btd_id > 0 raw_tp with BTF and additional type safety.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-5-ast@kernel.org
|
|
For consistency reasons, spell the controller name as "LINFlexD" in
comments and documentation.
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Link: https://lore.kernel.org/r/1571230107-8493-4-git-send-email-stefan-gabriel.mirea@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for 400Gbps speed, link modes of 50Gbps per lane
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Guest shared virtual address (SVA) may require host to shadow guest
PASID tables. Guest PASID can also be allocated from the host via
enlightened interfaces. In this case, guest needs to bind the guest
mm, i.e. cr3 in guest physical address to the actual PASID table in
the host IOMMU. Nesting will be turned on such that guest virtual
address can go through a two level translation:
- 1st level translates GVA to GPA
- 2nd level translates GPA to HPA
This patch introduces APIs to bind guest PASID data to the assigned
device entry in the physical IOMMU. See the diagram below for usage
explanation.
.-------------. .---------------------------.
| vIOMMU | | Guest process mm, FL only |
| | '---------------------------'
.----------------/
| PASID Entry |--- PASID cache flush -
'-------------' |
| | V
| | GP
'-------------'
Guest
------| Shadow |----------------------- GP->HP* ---------
v v |
Host v
.-------------. .----------------------.
| pIOMMU | | Bind FL for GVA-GPA |
| | '----------------------'
.----------------/ |
| PASID Entry | V (Nested xlate)
'----------------\.---------------------.
| | |Set SL to GPA-HPA |
| | '---------------------'
'-------------'
Where:
- FL = First level/stage one page tables
- SL = Second level/stage two page tables
- GP = Guest PASID
- HP = Host PASID
* Conversion needed if non-identity GP-HP mapping option is chosen.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In any virtualization use case, when the first translation stage
is "owned" by the guest OS, the host IOMMU driver has no knowledge
of caching structure updates unless the guest invalidation activities
are trapped by the virtualizer and passed down to the host.
Since the invalidation data can be obtained from user space and will be
written into physical IOMMU, we must allow security check at various
layers. Therefore, generic invalidation data format are proposed here,
model specific IOMMU drivers need to convert them into their own format.
Signed-off-by: Yi L Liu <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Backmerging to pull in HDR DP code:
https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
We would like to make use of perf in Vulkan. The Vulkan API is much
lower level than OpenGL, with applications directly exposed to the
concept of command buffers (pretty much equivalent to our batch
buffers). In Vulkan, queries are always limited in scope to a command
buffer. In OpenGL, the lack of command buffer concept meant that
queries' duration could span multiple command buffers.
With that restriction gone in Vulkan, we would like to simplify
measuring performance just by measuring the deltas between the counter
snapshots written by 2 MI_RECORD_PERF_COUNT commands, rather than the
more complex scheme we currently have in the GL driver, using 2
MI_RECORD_PERF_COUNT commands and doing some post processing on the
stream of OA reports, coming from the global OA buffer, to remove any
unrelated deltas in between the 2 MI_RECORD_PERF_COUNT.
Disabling preemption only apply to a single context with which want to
query performance counters for and is considered a privileged
operation, by default protected by CAP_SYS_ADMIN. It is possible to
enable it for a normal user by disabling the paranoid stream setting.
v2: Store preemption setting in intel_context (Chris)
v3: Use priorities to avoid preemption rather than the HW mechanism
v4: Just modify the port priority reporting function
v5: Add nopreempt flag on gem context and always flag requests
appropriately, regarless of OA reconfiguration.
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-4-chris@chris-wilson.co.uk
|
|
Introduce a new perf_ioctl command to change the OA configuration of the
active stream. This allows the OA stream to be reconfigured between
batch buffers, giving greater flexibility in sampling. We inject a
request into the OA context to reconfigure the stream asynchronously on
the GPU in between and ordered with execbuffer calls.
Original patch for dynamic reconfiguration by Lionel Landwerlin.
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-3-chris@chris-wilson.co.uk
|
|
Listing configurations at the moment is supported only through sysfs.
This might cause issues for applications wanting to list
configurations from a container where sysfs isn't available.
This change adds a way to query the number of configurations and their
content through the i915 query uAPI.
v2: Fix sparse warnings (Lionel)
Add support to query configuration using uuid (Lionel)
v3: Fix some inconsistency in uapi header (Lionel)
Fix unlocking when not locked issue (Lionel)
Add debug messages (Lionel)
v4: Fix missing unlock (Dan)
v5: Drop lock when copying config content to userspace (Chris)
v6: Drop lock when copying config list to userspace (Chris)
Fix deadlock when calling i915_perf_get_oa_config() under
perf.metrics_lock (Lionel)
Add i915_oa_config_get() (Chris)
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-2-chris@chris-wilson.co.uk
|
|
Reporting this version will help application figure out what level of
the support the running kernel provides.
v2: Add i915_perf_ioctl_version() (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-1-chris@chris-wilson.co.uk
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-10-14
The following pull-request contains BPF updates for your *net-next* tree.
12 days of development and
85 files changed, 1889 insertions(+), 1020 deletions(-)
The main changes are:
1) auto-generation of bpf_helper_defs.h, from Andrii.
2) split of bpf_helpers.h into bpf_{helpers, helper_defs, endian, tracing}.h
and move into libbpf, from Andrii.
3) Track contents of read-only maps as scalars in the verifier, from Andrii.
4) small x86 JIT optimization, from Daniel.
5) cross compilation support, from Ivan.
6) bpf flow_dissector enhancements, from Jakub and Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Code that iterates over all standard PCI BARs typically uses
PCI_STD_RESOURCE_END. However, that requires the unusual test
"i <= PCI_STD_RESOURCE_END" rather than something the typical
"i < PCI_STD_NUM_BARS".
Add a definition for PCI_STD_NUM_BARS and change loops to use the more
idiomatic C style to help avoid fencepost errors.
Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
|
|
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Johannes Berg says:
====================
A few more small things, nothing really stands out:
* minstrel improvements from Felix
* a TX aggregation simplification
* some additional capabilities for hwsim
* minor cleanups & docs updates
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.4-rc3 that
resolve a number of reported issues and regressions.
None of these are huge, full details are in the shortlog. There's also
a MAINTAINERS update that I think you might have already taken in your
tree already, but git should handle that merge easily.
All have been in linux-next with no reported issues"
* tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb
tty: serial: imx: Use platform_get_irq_optional() for optional IRQs
serial: fix kernel-doc warning in comments
serial: 8250_omap: Fix gpio check for auto RTS/CTS
serial: mctrl_gpio: Check for NULL pointer
tty: serial: fsl_lpuart: Fix lpuart_flush_buffer()
tty: serial: Fix PORT_LINFLEXUART definition
tty: n_hdlc: fix build on SPARC
serial: uartps: Fix uartps_major handling
serial: uartlite: fix exit path null pointer
tty: serial: linflexuart: Fix magic SysRq handling
serial: sh-sci: Use platform_get_irq_optional() for optional interrupts
dt-bindings: serial: sh-sci: Document r8a774b1 bindings
serial/sifive: select SERIAL_EARLYCON
tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()'
tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'
|
|
On SoCs with DMM/TILER, we have two ways to allocate buffers: normal
dma_alloc or via DMM (which basically functions as an IOMMU). DMM can
map 128MB at a time, and we only map the DMM buffers when they are used
(i.e. not at alloc time). If DMM is present, omapdrm always uses DMM.
There are use cases that require lots of big buffers that are being used
at the same time by different IPs. At the moment the userspace has a
hard maximum of 128MB.
This patch adds three new flags that can be used by the userspace to
solve the situation:
OMAP_BO_MEM_CONTIG: The driver will use dma_alloc to get the memory.
This can be used to avoid DMM if the userspace knows it needs more than
128M of memory at the same time.
OMAP_BO_MEM_DMM: The driver will use DMM to get the memory. There's not
much use for this flag at the moment, as on platforms with DMM it is
used by default, but it's here for completeness.
OMAP_BO_MEM_PIN: The driver will pin the memory at alloc time, and keep
it pinned. This can be used to 1) get an error at alloc time if DMM
space is full, and 2) get rid of the constant pin/unpin operations which
may have some effect on performance.
If none of the flags are given, the behavior is the same as currently.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010120000.1421-9-jjhiblot@ti.com
|
|
OMAP_BO_TILED does not make sense, as OMAP_BO_TILED_* values are not
bitmasks but normal values. As we already have OMAP_BO_TILED_MASK for
the mask, we can remove OMAP_BO_TILED and use OMAP_BO_TILED_MASK
instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010120000.1421-6-jjhiblot@ti.com
|
|
Reorder OMAP_BO flags and improve the comments.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010120000.1421-5-jjhiblot@ti.com
|
|
drm-misc-next for 5.5:
UAPI Changes:
-Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun)
-fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond)
-not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should
not reach userspace, but adding here to specifically call that out (Daniel)
-i810: Prevent underflow in dispatch ioctls (Dan)
-komeda: Add ACLK sysfs attribute (Mihail)
-v3d: Allow userspace to clean up after render jobs (Iago)
Cross-subsystem Changes:
-MAINTAINERS:
-Add Alyssa & Steven as panfrost reviewers (Rob)
-Add Jernej as DE2 reviewer (Maxime)
-Add Chen-Yu as Allwinner maintainer (Maxime)
-staging: Make some stack arrays static const (Colin)
Core Changes:
-ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd)
-docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent)
-connector: Allow more than 3 possible encoders for a connector (José)
-dp_cec: Allow a connector to be associated with a cec device (Dariusz)
-various: Fix some compile/sparse warnings (Ville)
-mm: Ensure mm node removals are properly serialised (Chris)
-panel: Specify the type of panel for drm_panels for later use (Laurent)
-panel: Use drm_panel_init to init device and funcs (Laurent)
-mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude)
-vram:
-Add lazy unmapping for gem bo's (Thomas)
-Unify and rationalize vram mm and gem vram (Thomas)
-Expose vmap and vunmap for gem vram objects (Thomas)
-Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas)
Driver Changes:
-various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris)
-ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas)
-komeda:
-Add error event printing (behind CONFIG) and reg dump support (Lowry)
-Add suspend/resume support (Lowry)
-Workaround D71 shadow registers not flushing on disable (Lowry)
-meson: Add suspend/resume support (Neil)
-omap: Miscellaneous refactors and improvements (Tomi/Jyri)
-panfrost/shmem: Silence lockdep by using mutex_trylock (Rob)
-panfrost: Miscellaneous small fixes (Rob/Steven)
-sti: Fix warnings (Benjamin/Linus)
-sun4i:
-Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan)
-A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy)
-virtio:
-Add module param to switch resource reuse workaround on/off (Gerd)
-Avoid calling vmexit while holding spinlock (Gerd)
-Use gem shmem helpers instead of ttm (Gerd)
-Accommodate command buffer allocations too big for cma (David)
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Raymond Smith <raymond.smith@arm.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Lowry Li <Lowry.Li@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: David Riley <davidriley@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST
# gpg: using RSA key 732C002572DCAF79
# gpg: Can't check signature: public key not found
# Conflicts:
# drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
# drivers/gpu/drm/i915/i915_drv.c
# drivers/gpu/drm/i915/i915_gem.c
# drivers/gpu/drm/i915/i915_gem_gtt.c
# drivers/gpu/drm/i915/i915_vma.c
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay
|
|
This allows the seccomp notifier to continue a syscall. A positive
discussion about this feature was triggered by a post to the
ksummit-discuss mailing list (cf. [3]) and took place during KSummit
(cf. [1]) and again at the containers/checkpoint-restore
micro-conference at Linux Plumbers.
Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4])
which enables a process (watchee) to retrieve an fd for its seccomp
filter. This fd can then be handed to another (usually more privileged)
process (watcher). The watcher will then be able to receive seccomp
messages about the syscalls having been performed by the watchee.
This feature is heavily used in some userspace workloads. For example,
it is currently used to intercept mknod() syscalls in user namespaces
aka in containers.
The mknod() syscall can be easily filtered based on dev_t. This allows
us to only intercept a very specific subset of mknod() syscalls.
Furthermore, mknod() is not possible in user namespaces toto coelo and
so intercepting and denying syscalls that are not in the whitelist on
accident is not a big deal. The watchee won't notice a difference.
In contrast to mknod(), a lot of other syscall we intercept (e.g.
setxattr()) cannot be easily filtered like mknod() because they have
pointer arguments. Additionally, some of them might actually succeed in
user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we
currently cannot tell seccomp to continue from a user notifier we are
stuck with performing all of the syscalls in lieu of the container. This
is a huge security liability since it is extremely difficult to
correctly assume all of the necessary privileges of the calling task
such that the syscall can be successfully emulated without escaping
other additional security restrictions (think missing CAP_MKNOD for
mknod(), or MS_NODEV on a filesystem etc.). This can be solved by
telling seccomp to resume the syscall.
One thing that came up in the discussion was the problem that another
thread could change the memory after userspace has decided to let the
syscall continue which is a well known TOCTOU with seccomp which is
present in other ways already.
The discussion showed that this feature is already very useful for any
syscall without pointer arguments. For any accidentally intercepted
non-pointer syscall it is safe to continue.
For syscalls with pointer arguments there is a race but for any cautious
userspace and the main usec cases the race doesn't matter. The notifier
is intended to be used in a scenario where a more privileged watcher
supervises the syscalls of lesser privileged watchee to allow it to get
around kernel-enforced limitations by performing the syscall for it
whenever deemed save by the watcher. Hence, if a user tricks the watcher
into allowing a syscall they will either get a deny based on
kernel-enforced restrictions later or they will have changed the
arguments in such a way that they manage to perform a syscall with
arguments that they would've been allowed to do anyway.
In general, it is good to point out again, that the notifier fd was not
intended to allow userspace to implement a security policy but rather to
work around kernel security mechanisms in cases where the watcher knows
that a given action is safe to perform.
/* References */
[1]: https://linuxplumbersconf.org/event/4/contributions/560
[2]: https://linuxplumbersconf.org/event/4/contributions/477
[3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io
[4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
CC: Tyler Hicks <tyhicks@canonical.com>
Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This control returns the unit cell size in nanometres. The struct provides
the width and the height in separated fields to take into consideration
asymmetric pixels and/or hardware binning.
This control is required for automatic calibration of sensors/cameras.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This type contains the width and the height of a rectangular area.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Currently sof doesn't support acpi leds with mute switches. So implement
acpi leds following quite shamelessly existing HDA implementation by
Takashi Iwai.
Mute leds can be enabled in topology by adding led and direction token
in switch control private data.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce sof_ipc_dai_esai_params to keep information that
we get from topology and we send to DSP FW.
Also bump the ABI minor to reflect the changes on DSP FW.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support the allocation/deallocation of buffers mapped to the DSP.
When the memory mapped to the DSP at process creation is not enough,
the fastrpc library can extend it at runtime. This avoids having to do
large preallocations by default.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191009144123.24583-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a header include guard just in case.
Link: https://lore.kernel.org/r/20190728164643.16335-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch is to add a new event SCTP_SEND_FAILED_EVENT described in
rfc6458#section-6.1.11. It's a update of SCTP_SEND_FAILED event:
struct sctp_sndrcvinfo ssf_info is replaced with
struct sctp_sndinfo ssfe_info in struct sctp_send_failed_event.
SCTP_SEND_FAILED is being deprecated, but we don't remove it in this
patch. Both are being processed in sctp_datamsg_destroy() when the
corresp event flag is set.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
UAPI Changes:
- Never allow userptr into the mappable GGTT (Chris)
No existing users. Avoid anyone from even trying to
spare a deadlock scenario.
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Eliminate struct_mutex use as BKL! (Chris)
Only used for execbuf serialisation.
- Initialize DDI TC and TBT ports (D-I) on Tigerlake (Lucas)
- Fix DKL link training for 2.7GHz and 1.62GHz (Jose)
- Add Tigerlake DKL PHY programming sequences (Clinton)
- Add Tigerlake Thunderbolt PLL divider values (Imre)
- drm/i915: Use helpers for drm_mm_node booleans (Chris)
- Restrict L3 remapping sysfs interface to dwords (Chris)
- Fix audio power up sequence for gen10+ display (Kai)
- Skip redundant execlist resubmission (Chris)
- Only unwedge if we can reset GPU first (Chris)
- Initialise breadcrumb lists on the virtual engine (Chris)
- Don't rely on kernel context existing during early errors (Matt A)
- Update Icelake+ MG_DP_MODE programming table (Clinton)
- Update DMC firmware for Icelake (Anusha)
- Downgrade DP MST error after unplugging TypeC cable (Srinivasan)
- Limit MST modes based on plane size too (Ville)
- Polish intel_tv_mode_valid() (Ville)
- Fix g4x sprite scaling stride check with GTT remapping (Ville)
- Don't advertize non-exisiting crtcs (Ville)
- Clean up encoder->crtc_mask setup (Ville)
- Use tc_port instead of port parameter to MG registers (Jose)
- Remove static variable for aux last status (Jani)
- Implement a better i945gm vblank irq vs. C-states workaround (Ville)
- Make the object creation interface consistent (CQ)
- Rename intel_vga_msr_write() to intel_vga_reset_io_mem() (Jani, Ville)
- Eliminate previous drm_dbg/drm_err usage (Jani)
- Move gmbus setup down to intel_modeset_init() (Jani)
- Abstract all vgaarb access to intel_vga.[ch] (Jani)
- Split out i915_switcheroo.[ch] from i915_drv.c (Jani)
- Use intel_gt in has_reset* (Chris)
- Eliminate return value for i915_gem_init_early (Matt A)
- Selftest improvements (Chris)
- Update HuC firmware header version number format (Daniele)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007134801.GA24313@jlahtine-desk.ger.corp.intel.com
|
|
When the new CEC_OP_UI_CMD defines were added I forgot to update this
header to use these new defines. This is now fixed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The CEC_MSG_GIVE_DECK_STATUS and CEC_MSG_GIVE_TUNER_DEVICE_STATUS commands
both have a status_req argument: ON, OFF, ONCE. If ON or ONCE, then the
follower will reply with a STATUS message. Either once or whenever the
status changes (status_req == ON).
If status_req == OFF, then it will stop sending continuous status updates,
but the follower will *not* send a STATUS message in that case.
This means that if status_req == OFF, then msg->reply should be 0 as well
since no reply is expected in that case.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Various small fixes to BPF helper documentation comments, enabling
automatic header generation with a list of BPF helpers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a statistic for number of RX resyncs sent down to the NIC.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a statistic for TLS record decryption errors.
Since devices are supposed to pass records as-is when they
encounter errors this statistic will count bad records in
both pure software and inline crypto configurations.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add SNMP stats for number of sockets with successfully
installed sessions. Break them down to software and
hardware ones. Note that if hardware offload fails
stack uses software implementation, and counts the
session appropriately.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a skeleton structure for adding TLS statistics.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Add casts to fix these warnings:
./usr/include/linux/netfilter_arp/arp_tables.h:200:19: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/netfilter_bridge/ebtables.h:197:19: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/netfilter_ipv4/ip_tables.h:223:19: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/netfilter_ipv6/ip6_tables.h:263:19: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/tipc_config.h:310:28: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/tipc_config.h:410:24: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/virtio_ring.h:170:16: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
Those are theoretical probably but kernel doesn't control compiler flags
in userspace.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All devlink instances are created in init_net and stay there for a
lifetime. Allow user to be able to move devlink instances into
namespaces during devlink reload operation. That ensures proper
re-instantiation of driver objects, including netdevices.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove iw_cxgb3 module from kernel as the corresponding HW Chelsio T3 has
reached EOL.
Link: https://lore.kernel.org/r/20190930074252.20133-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull copy_struct_from_user() helper from Christian Brauner:
"This contains the copy_struct_from_user() helper which got split out
from the openat2() patchset. It is a generic interface designed to
copy a struct from userspace.
The helper will be especially useful for structs versioned by size of
which we have quite a few. This allows for backwards compatibility,
i.e. an extended struct can be passed to an older kernel, or a legacy
struct can be passed to a newer kernel. For the first case (extended
struct, older kernel) the new fields in an extended struct can be set
to zero and the struct safely passed to an older kernel.
The most obvious benefit is that this helper lets us get rid of
duplicate code present in at least sched_setattr(), perf_event_open(),
and clone3(). More importantly it will also help to ensure that users
implementing versioning-by-size end up with the same core semantics.
This point is especially crucial since we have at least one case where
versioning-by-size is used but with slighly different semantics:
sched_setattr(), perf_event_open(), and clone3() all do do similar
checks to copy_struct_from_user() while rt_sigprocmask(2) always
rejects differently-sized struct arguments.
With this pull request we also switch over sched_setattr(),
perf_event_open(), and clone3() to use the new helper"
* tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
usercopy: Add parentheses around assignment in test_copy_struct_from_user
perf_event_open: switch to copy_struct_from_user()
sched_setattr: switch to copy_struct_from_user()
clone3: switch to copy_struct_from_user()
lib: introduce copy_struct_from_user() helper
|
|
Pull clone3/pidfd fixes from Christian Brauner:
"This contains a couple of fixes:
- Fix pidfd selftest compilation (Shuah Kahn)
Due to a false linking instruction in the Makefile compilation for
the pidfd selftests would fail on some systems.
- Fix compilation for glibc on RISC-V systems (Seth Forshee)
In some scenarios linux/uapi/linux/sched.h is included where
__ASSEMBLY__ is defined causing a build failure because struct
clone_args was not guarded by an #ifndef __ASSEMBLY__.
- Add missing clone3() and struct clone_args kernel-doc (Christian Brauner)
clone3() and struct clone_args were missing kernel-docs. (The goal
is to use kernel-doc for any function or type where it's worth it.)
For struct clone_args this also contains a comment about the fact
that it's versioned by size"
* tag 'for-linus-20191003' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
sched: add kernel-doc for struct clone_args
fork: add kernel-doc for clone3
selftests: pidfd: Fix undefined reference to pthread_create()
sched: Add __ASSEMBLY__ guards around struct clone_args
|
Christoffer Dall
Hans Verkuil
Fabiano Rosas
David S. Miller
Adam Jackson
Chunming Zhou
Yishai Hadas
Alexei Starovoitov
Stefan-Gabriel Mirea
Jiri Pirko
Jacob Pan
Yi L Liu
Joonas Lahtinen
Lionel Landwerlin
Chris Wilson
Denis Efremov
Greg Kroah-Hartman
Linus Torvalds
Tomi Valkeinen
Dave Airlie
Christian Brauner
Ricardo Ribalda Delgado
Jaska Uimonen
Daniel Baluta
Jorge Ramirez-Ortiz
Masahiro Yamada
Xin Long
Andrii Nakryiko
Jakub Kicinski
Alexey Dobriyan
Potnuri Bharat Teja