aboutsummaryrefslogtreecommitdiffstats
path: root/include/xen (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-10-06Merge tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds1-2/+1
Pull xen updates from David Vrabel: "xen features and fixes for 4.9: - switch to new CPU hotplug mechanism - support driver_override in pciback - require vector callback for HVM guests (the alternate mechanism via the platform device has been broken for ages)" * tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/x86: Update topology map for PV VCPUs xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier xen/pciback: support driver_override xen/pciback: avoid multiple entries in slot list xen/pciback: simplify pcistub device handling xen: Remove event channel notification through Xen PCI platform device xen/events: Convert to hotplug state machine xen/x86: Convert to hotplug state machine x86/xen: add missing \n at end of printk warning message xen/grant-table: Use kmalloc_array() in arch_gnttab_valloc() xen: Make VPMU init message look less scary xen: rename xen_pmu_init() in sys-hypervisor.c hotplug: Prevent alloc/free of irq descriptors during cpu up/down (again) xen/x86: Move irq allocation from Xen smp_op.cpu_up()
2016-09-30xen: Remove event channel notification through Xen PCI platform deviceKarimAllah Ahmed1-2/+1
Ever since commit 254d1a3f02eb ("xen/pv-on-hvm kexec: shutdown watches from old kernel") using the INTx interrupt from Xen PCI platform device for event channel notification would just lockup the guest during bootup. postcore_initcall now calls xs_reset_watches which will eventually try to read a value from XenStore and will get stuck on read_reply at XenBus forever since the platform driver is not probed yet and its INTx interrupt handler is not registered yet. That means that the guest can not be notified at this moment of any pending event channels and none of the per-event handlers will ever be invoked (including the XenStore one) and the reply will never be picked up by the kernel. The exact stack where things get stuck during xenbus_init: -xenbus_init -xs_init -xs_reset_watches -xenbus_scanf -xenbus_read -xs_single -xs_single -xs_talkv Vector callbacks have always been the favourite event notification mechanism since their introduction in commit 38e20b07efd5 ("x86/xen: event channels delivery on HVM.") and the vector callback feature has always been advertised for quite some time by Xen that's why INTx was broken for several years now without impacting anyone. Luckily this also means that event channel notification through INTx is basically dead-code which can be safely removed without impacting anybody since it has been effectively disabled for more than 4 years with nobody complaining about it (at least as far as I'm aware of). This commit removes event channel notification through Xen PCI platform device. Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Julien Grall <julien.grall@citrix.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: xen-devel@lists.xenproject.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-09-05xen: Sync xen headerJuergen Gross1-18/+82
Import the actual version of include/xen/interface/sched.h from Xen. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David Vrabel <david.vrabel@citrix.com> Cc: Douglas_Warzecha@dell.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akataria@vmware.com Cc: boris.ostrovsky@oracle.com Cc: chrisw@sous-sol.org Cc: hpa@zytor.com Cc: jdelvare@suse.com Cc: jeremy@goop.org Cc: linux@roeck-us.net Cc: pali.rohar@gmail.com Cc: rusty@rustcorp.com.au Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1472453327-19050-2-git-send-email-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-24xen: change the type of xen_vcpu_id to uint32_tVitaly Kuznetsov1-2/+2
We pass xen_vcpu_id mapping information to hypercalls which require uint32_t type so it would be cleaner to have it as uint32_t. The initializer to -1 can be dropped as we always do the mapping before using it and we never check the 'not set' value anyway. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski1-6/+6
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26xen: add static initialization of steal_clock op to xen_time_opsJuergen Gross1-0/+1
pv_time_ops might be overwritten with xen_time_ops after the steal_clock operation has been initialized already. To prevent calling a now uninitialized function pointer add the steal_clock static initialization to xen_time_ops. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25xen: introduce xen_vcpu_id mappingVitaly Kuznetsov1-0/+6
It may happen that Xen's and Linux's ideas of vCPU id diverge. In particular, when we crash on a secondary vCPU we may want to do kdump and unlike plain kexec where we do migrate_to_reboot_cpu() we try booting on the vCPU which crashed. This doesn't work very well for PVHVM guests as we have a number of hypercalls where we pass vCPU id as a parameter. These hypercalls either fail or do something unexpected. To solve the issue introduce percpu xen_vcpu_id mapping. ARM and PV guests get direct mapping for now. Boot CPU for PVHVM guest gets its id from CPUID. With secondary CPUs it is a bit more trickier. Currently, we initialize IPI vectors before these CPUs boot so we can't use CPUID. Use ACPI ids from MADT instead. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: update xen headersJuergen Gross2-10/+31
Update some Xen headers to be able to use new functionality. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: add steal_clock support on x86Juergen Gross1-0/+1
The pv_time_ops structure contains a function pointer for the "steal_clock" functionality used only by KVM and Xen on ARM. Xen on x86 uses its own mechanism to account for the "stolen" time a thread wasn't able to run due to hypervisor scheduling. Add support in Xen arch independent time handling for this feature by moving it out of the arm arch into drivers/xen and remove the x86 Xen hack. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06XEN: EFI: Move x86 specific codes to architecture directoryShannon Zhao1-8/+22
Move x86 specific codes to architecture directory and export those EFI runtime service functions. This will be useful for initializing runtime service on ARM later. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-07-06xen/hvm/params: Add a new delivery type for event-channel in HVM_PARAM_CALLBACK_IRQShannon Zhao1-0/+13
This new delivery type which is for ARM shares the same value with HVM_PARAM_CALLBACK_TYPE_VECTOR which is for x86. val[15:8] is flag: val[7:0] is a PPI. To the flag, bit 8 stands the interrupt mode is edge(1) or level(0) and bit 9 stands the interrupt polarity is active low(1) or high(0). Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06Xen: public/hvm: sync changes of HVM_PARAM_CALLBACK_VIA ABI from XenShannon Zhao1-6/+21
Sync the changes of HVM_PARAM_CALLBACK_VIA ABI introduced by Xen commit <ca5c54b6ff05> (public/hvm: export the HVM_PARAM_CALLBACK_VIA ABI in the API). Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06xen: memory : Add new XENMAPSPACE type XENMAPSPACE_dev_mmioShannon Zhao1-0/+1
Add a new type of Xen map space for Dom0 to map device's MMIO region. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06xen/grant-table: Move xlated_setup_gnttab_pages to common placeShannon Zhao1-0/+2
Move xlated_setup_gnttab_pages to common place, so it can be reused by ARM to setup grant table. Rename it to xen_xlate_map_ballooned_pages. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-04-06xen: Fix page <-> pfn conversion on 32 bit systemsRoss Lagerwall1-2/+2
Commit 1084b1988d22dc165c9dbbc2b0e057f9248ac4db (xen: Add Xen specific page definition) caused a regression in 4.4. The xen functions to convert between pages and pfns fail due to an overflow on systems where a physical address may not fit in an unsigned long (e.g. x86 32 bit PAE systems). Rework the conversion to avoid overflow. This should also result in simpler object code. This bug manifested itself as disk corruption with Linux 4.4 when using blkfront in a Xen HVM x86 32 bit guest with more than 4 GiB of memory. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-03-13xen-netback: re-import canonical netif headerPaul Durrant1-95/+766
The canonical netif header (in the Xen source repo) and the Linux variant have diverged significantly. Recently much documentation has been added to the canonical header which is highly useful for developers making modifications to either xen-netfront or xen-netback. This patch therefore re-imports the canonical header in its entirity. To maintain compatibility and some style consistency with the old Linux variant, the header was stripped of its emacs boilerplate, and post-processed and copied into place with the following commands: ed -s netif.h << EOF H ,s/NETTXF_/XEN_NETTXF_/g ,s/NETRXF_/XEN_NETRXF_/g ,s/NETIF_/XEN_NETIF_/g ,s/XEN_XEN_/XEN_/g ,s/netif/xen_netif/g ,s/xen_xen_/xen_/g ,s/^typedef.*$//g ,s/^ /${TAB}/g w $ w EOF indent --line-length 80 --linux-style netif.h \ -o include/xen/interface/io/netif.h Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21Merge branch 'for-4.5/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+48
Pull block driver updates from Jens Axboe: "This is the block driver pull request for 4.5, with the exception of NVMe, which is in a separate branch and will be posted after this one. This pull request contains: - A set of bcache stability fixes, which have been acked by Kent. These have been used and tested for more than a year by the community, so it's about time that they got in. - A set of drbd updates from the drbd team (Andreas, Lars, Philipp) and Markus Elfring, Oleg Drokin. - A set of fixes for xen blkback/front from the usual suspects, (Bob, Konrad) as well as community based fixes from Kiri, Julien, and Peng. - A 2038 time fix for sx8 from Shraddha, with a fix from me. - A small mtip32xx cleanup from Zhu Yanjun. - A null_blk division fix from Arnd" * 'for-4.5/drivers' of git://git.kernel.dk/linux-block: (71 commits) null_blk: use sector_div instead of do_div mtip32xx: restrict variables visible in current code module xen/blkfront: Fix crash if backend doesn't follow the right states. xen/blkback: Fix two memory leaks. xen/blkback: make st_ statistics per ring xen/blkfront: Handle non-indirect grant with 64KB pages xen-blkfront: Introduce blkif_ring_get_request xen-blkback: clear PF_NOFREEZE for xen_blkif_schedule() xen/blkback: Free resources if connect_ring failed. xen/blocks: Return -EXX instead of -1 xen/blkback: make pool of persistent grants and free pages per-queue xen/blkback: get the number of hardware queues/rings from blkfront xen/blkback: pseudo support for multi hardware queues/rings xen/blkback: separate ring information out of struct xen_blkif xen/blkfront: correct setting for xen_blkif_max_ring_order xen/blkfront: make persistent grants pool per-queue xen/blkfront: Remove duplicate setting of ->xbdev. xen/blkfront: Cleanup of comments, fix unaligned variables, and syntax errors. xen/blkfront: negotiate number of queues/rings to be used with backend xen/blkfront: split per device io_lock ...
2016-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-8/+8
Pull virtio barrier rework+fixes from Michael Tsirkin: "This adds a new kind of barrier, and reworks virtio and xen to use it. Plus some fixes here and there" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (44 commits) checkpatch: add virt barriers checkpatch: check for __smp outside barrier.h checkpatch.pl: add missing memory barriers virtio: make find_vqs() checkpatch.pl-friendly virtio_balloon: fix race between migration and ballooning virtio_balloon: fix race by fill and leak s390: more efficient smp barriers s390: use generic memory barriers xen/events: use virt_xxx barriers xen/io: use virt_xxx barriers xenbus: use virt_xxx barriers virtio_ring: use virt_store_mb sh: move xchg_cmpxchg to a header by itself sh: support 1 and 2 byte xchg virtio_ring: update weak barriers to use virt_xxx Revert "virtio_ring: Update weak barriers to use dma_wmb/rmb" asm-generic: implement virt_xxx memory barriers x86: define __smp_xxx xtensa: define __smp_xxx tile: define __smp_xxx ...
2016-01-12xen/io: use virt_xxx barriersMichael S. Tsirkin1-8/+8
include/xen/interface/io/ring.h uses full memory barriers to communicate with the other side. For guests compiled with CONFIG_SMP, smp_wmb and smp_mb would be sufficient, so mb() and wmb() here are only needed if a non-SMP guest runs on an SMP host. Switch to virt_xxx barriers which serve this exact purpose. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2016-01-04xen/blkif: document blkif multi-queue/ring extensionBob Liu1-0/+48
Document the multi-queue/ring feature in terms of XenStore keys to be written by the backend and by the frontend. Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-21xen: introduce XENPF_settime64Stefano Stabellini1-4/+14
Rename the current XENPF_settime hypercall and related struct to XENPF_settime32. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-12-21xen: rename dom0_op to platform_opStefano Stabellini1-1/+1
The dom0_op hypercall has been renamed to platform_op since Xen 3.2, which is ancient, and modern upstream Linux kernels cannot run as dom0 and it anymore anyway. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-12-21xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.cStefano Stabellini1-0/+5
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen: Add RING_COPY_REQUEST()David Vrabel1-0/+14
Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly (i.e., by not considering that the other end may alter the data in the shared ring while it is being inspected). Safe usage of a request generally requires taking a local copy. Provide a RING_COPY_REQUEST() macro to use instead of RING_GET_REQUEST() and an open-coded memcpy(). This takes care of ensuring that the copy is done correctly regardless of any possible compiler optimizations. Use a volatile source to prevent the compiler from reordering or omitting the copy. This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-10-23xen/grant-table: Add an helper to iterate over a specific number of grantsJulien Grall1-0/+6
With the 64KB page granularity support on ARM64, a Linux page may be split accross multiple grant. Currently we have the helper gnttab_foreach_grant_in_grant to break a Linux page based on an offset and a len, but it doesn't fit when we only have a number of grants in hand. Introduce a new helper which take an array of Linux page and a number of grant and will figure out the address of each grant. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/xenbus: Rename *RING_PAGE* to *RING_GRANT*Julien Grall1-2/+2
Linux may use a different page size than the size of grant. So make clear that the order is actually in number of grant. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/grant: Add helper gnttab_page_grant_foreign_access_ref_oneJulien Grall1-0/+9
Many PV drivers contain the idiom: pfn = page_to_gfn(...) /* Or similar */ gnttab_grant_foreign_access_ref Replace it by a new helper. Note that when Linux is using a different page granularity than Xen, the helper only gives access to the first 4KB grant. This is useful where drivers are allocating a full Linux page for each grant. Also include xen/interface/grant_table.h rather than xen/grant_table.h in asm/page.h for x86 to fix a compilation issue [1]. Only the former is useful in order to get the structure definition. [1] Interdependency between asm/page.h and xen/grant_table.h which result to page_mfn not being defined when necessary. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/grant: Introduce helpers to split a page into grantJulien Grall1-0/+42
Currently, a grant is always based on the Xen page granularity (i.e 4KB). When Linux is using a different page granularity, a single page will be split between multiple grants. The new helpers will be in charge of splitting the Linux page into grants and call a function given by the caller on each grant. Also provide an helper to count the number of grants within a given contiguous region. Note that the x86/include/asm/xen/page.h is now including xen/interface/grant_table.h rather than xen/grant_table.h. It's necessary because xen/grant_table.h depends on asm/xen/page.h and will break the compilation. Furthermore, only definition in interface/grant_table.h is required. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen: Add Xen specific page definitionJulien Grall1-1/+26
The Xen hypercall interface is always using 4K page granularity on ARM and x86 architecture. With the incoming support of 64K page granularity for ARM64 guest, it won't be possible to re-use the Linux page definition in Xen drivers. Introduce Xen page definition helpers based on the Linux page definition. They have exactly the same name but prefixed with XEN_/xen_ prefix. Also modify xen_page_to_gfn to use new Xen page definition. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/balloon: use hotplugged pages for foreign mappings etc.David Vrabel1-0/+1
alloc_xenballooned_pages() is used to get ballooned pages to back foreign mappings etc. Instead of having to balloon out real pages, use (if supported) hotplugged memory. This makes more memory available to the guest and reduces fragmentation in the p2m. This is only enabled if the xen.balloon.hotplug_unpopulated sysctl is set to 1. This sysctl defaults to 0 in case the udev rules to automatically online hotplugged memory do not exist. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Add xen.balloon.hotplug_unpopulated sysctl to enable use of hotplug for unpopulated pages.
2015-10-23xen/balloon: make alloc_xenballoon_pages() always allocate low pagesDavid Vrabel1-2/+1
All users of alloc_xenballoon_pages() wanted low memory pages, so remove the option for high memory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-10-23xen/balloon: rationalize memory hotplug statsDavid Vrabel1-4/+1
The stats used for memory hotplug make no sense and are fiddled with in odd ways. Remove them and introduce total_pages to track the total number of pages (both populated and unpopulated) including those within hotplugged regions (note that this includes not yet onlined pages). This will be used in a subsequent commit (xen/balloon: only hotplug additional memory if required) when deciding whether additional memory needs to be hotplugged. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-10-23xen/balloon: remove scratch page left oversDavid Vrabel1-3/+0
Commit 0bb599fd30108883b00c7d4a226eeb49111e6932 (xen: remove scratch frames for ballooned pages and m2p override) removed the use of the scratch page for ballooned out pages. Remove some left over function definitions. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-09-28x86/xen: Support kexec/kdump in HVM guests by doing a soft resetVitaly Kuznetsov1-0/+8
Currently there is a number of issues preventing PVHVM Xen guests from doing successful kexec/kdump: - Bound event channels. - Registered vcpu_info. - PIRQ/emuirq mappings. - shared_info frame after XENMAPSPACE_shared_info operation. - Active grant mappings. Basically, newly booted kernel stumbles upon already set up Xen interfaces and there is no way to reestablish them. In Xen-4.7 a new feature called 'soft reset' is coming. A guest performing kexec/kdump operation is supposed to call SCHEDOP_shutdown hypercall with SHUTDOWN_soft_reset reason before jumping to new kernel. Hypervisor (with some help from toolstack) will do full domain cleanup (but keeping its memory and vCPU contexts intact) returning the guest to the state it had when it was first booted and thus allowing it to start over. Doing SHUTDOWN_soft_reset on Xen hypervisors which don't support it is probably OK as by default all unknown shutdown reasons cause domain destroy with a message in toolstack log: 'Unknown shutdown reason code 5. Destroying domain.' which gives a clue to what the problem is and eliminates false expectations. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-10Merge tag 'for-linus-4.3-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds2-7/+7
Pull xen terminology fixes from David Vrabel: "Use the correct GFN/BFN terms more consistently" * tag 'for-linus-4.3-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Rename the variable xen_store_mfn to xen_store_gfn xen/privcmd: Further s/MFN/GFN/ clean-up hvc/xen: Further s/MFN/GFN clean-up video/xen-fbfront: Further s/MFN/GFN clean-up xen/tmem: Use xen_page_to_gfn rather than pfn_to_gfn xen: Use correctly the Xen memory terminologies arm/xen: implement correctly pfn_to_mfn xen: Make clear that swiotlb and biomerge are dealing with DMA address
2015-09-08Merge tag 'for-linus-4.3-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds5-18/+136
Pull xen updates from David Vrabel: "Xen features and fixes for 4.3: - Convert xen-blkfront to the multiqueue API - [arm] Support binding event channels to different VCPUs. - [x86] Support > 512 GiB in a PV guests (off by default as such a guest cannot be migrated with the current toolstack). - [x86] PMU support for PV dom0 (limited support for using perf with Xen and other guests)" * tag 'for-linus-4.3-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (33 commits) xen: switch extra memory accounting to use pfns xen: limit memory to architectural maximum xen: avoid another early crash of memory limited dom0 xen: avoid early crash of memory limited dom0 arm/xen: Remove helpers which are PV specific xen/x86: Don't try to set PCE bit in CR4 xen/PMU: PMU emulation code xen/PMU: Intercept PMU-related MSR and APIC accesses xen/PMU: Describe vendor-specific PMU registers xen/PMU: Initialization code for Xen PMU xen/PMU: Sysfs interface for setting Xen PMU mode xen: xensyms support xen: remove no longer needed p2m.h xen: allow more than 512 GB of RAM for 64 bit pv-domains xen: move p2m list if conflicting with e820 map xen: add explicit memblock_reserve() calls for special pages mm: provide early_memremap_ro to establish read-only mapping xen: check for initrd conflicting with e820 map xen: check pre-allocated page tables for conflict with memory map xen: check for kernel memory conflicting with memory layout ...
2015-09-08xen/privcmd: Further s/MFN/GFN/ clean-upJulien Grall1-5/+5
The privcmd code is mixing the usage of GFN and MFN within the same functions which make the code difficult to understand when you only work with auto-translated guests. The privcmd driver is only dealing with GFN so replace all the mention of MFN into GFN. The ioctl structure used to map foreign change has been left unchanged given that the userspace is using it. Nonetheless, add a comment to explain the expected value within the "mfn" field. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: Use correctly the Xen memory terminologiesJulien Grall1-2/+2
Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN is meant, I suspect this is because the first support for Xen was for PV. This resulted in some misimplementation of helpers on ARM and confused developers about the expected behavior. For instance, with pfn_to_mfn, we expect to get an MFN based on the name. Although, if we look at the implementation on x86, it's returning a GFN. For clarity and avoid new confusion, replace any reference to mfn with gfn in any helpers used by PV drivers. The x86 code will still keep some reference of pfn_to_mfn which may be used by all kind of guests No changes as been made in the hypercall field, even though they may be invalid, in order to keep the same as the defintion in xen repo. Note that page_to_mfn has been renamed to xen_page_to_gfn to avoid a name to close to the KVM function gfn_to_page. Take also the opportunity to simplify simple construction such as pfn_to_mfn(page_to_pfn(page)) into xen_page_to_gfn. More complex clean up will come in follow-up patches. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=e758ed14f390342513405dd766e874934573e6cb Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: switch extra memory accounting to use pfnsJuergen Gross1-2/+2
Instead of using physical addresses for accounting of extra memory areas available for ballooning switch to pfns as this is much less error prone regarding partial pages. Reported-by: Roger Pau Monné <roger.pau@citrix.com> Tested-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-02xen-netback: add support for multicast controlPaul Durrant1-1/+7
Xen's PV network protocol includes messages to add/remove ethernet multicast addresses to/from a filter list in the backend. This allows the frontend to request the backend only forward multicast packets which are of interest thus preventing unnecessary noise on the shared ring. The canonical netif header in git://xenbits.xen.org/xen.git specifies the message format (two more XEN_NETIF_EXTRA_TYPEs) so the minimal necessary changes have been pulled into include/xen/interface/io/netif.h. To prevent the frontend from extending the multicast filter list arbitrarily a limit (XEN_NETBK_MCAST_MAX) has been set to 64 entries. This limit is not specified by the protocol and so may change in future. If the limit is reached then the next XEN_NETIF_EXTRA_TYPE_MCAST_ADD sent by the frontend will be failed with NETIF_RSP_ERROR. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20xen/PMU: Intercept PMU-related MSR and APIC accessesBoris Ostrovsky1-0/+2
Provide interfaces for recognizing accesses to PMU-related MSRs and LVTPC APIC and process these accesses in Xen PMU code. (The interrupt handler performs XENPMU_flush right away in the beginning since no PMU emulation is available. It will be added with a later patch). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/PMU: Initialization code for Xen PMUBoris Ostrovsky2-0/+34
Map shared data structure that will hold CPU registers, VPMU context, V/PCPU IDs of the CPU interrupted by PMU interrupt. Hypervisor fills this information in its handler and passes it to the guest for further processing. Set up PMU VIRQ. Now that perf infrastructure will assume that PMU is available on a PV guest we need to be careful and make sure that accesses via RDPMC instruction don't cause fatal traps by the hypervisor. Provide a nop RDPMC handler. For the same reason avoid issuing a warning on a write to APIC's LVTPC. Both of these will be made functional in later patches. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/PMU: Sysfs interface for setting Xen PMU modeBoris Ostrovsky2-0/+60
Set Xen's PMU mode via /sys/hypervisor/pmu/pmu_mode. Add XENPMU hypercall. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen: xensyms supportBoris Ostrovsky1-0/+18
Export Xen symbols to dom0 via /proc/xen/xensyms (similar to /proc/kallsyms). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen: sync with xen headersJuergen Gross1-15/+20
Use the newest headers from the xen tree to get some new structure layouts. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/events: Support event channel rebind on ARMJulien Grall1-1/+0
Currently, the event channel rebind code is gated with the presence of the vector callback. The virtual interrupt controller on ARM has the concept of per-CPU interrupt (PPI) which allow us to support per-VCPU event channel. Therefore there is no need of vector callback for ARM. Xen is already using a free PPI to notify the guest VCPU of an event. Furthermore, the xen code initialization in Linux (see arch/arm/xen/enlighten.c) is requesting correctly a per-CPU IRQ. Introduce new helper xen_support_evtchn_rebind to allow architecture decide whether rebind an event is support or not. It will always return true on ARM and keep the same behavior on x86. This is also allow us to drop the usage of xen_have_vector_callback entirely in the ARM code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-05-19xen/events: don't bind non-percpu VIRQs with percpu chipDavid Vrabel1-1/+1
A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
2015-04-29xen: Suspend ticks on all CPUs during suspendBoris Ostrovsky1-0/+1
Commit 77e32c89a711 ("clockevents: Manage device's state separately for the core") decouples clockevent device's modes from states. With this change when a Xen guest tries to resume, it won't be calling its set_mode op which needs to be done on each VCPU in order to make the hypervisor aware that we are in oneshot mode. This happens because clockevents_tick_resume() (which is an intermediate step of resuming ticks on a processor) doesn't call clockevents_set_state() anymore and because during suspend clockevent devices on all VCPUs (except for the one doing the suspend) are left in ONESHOT state. As result, during resume the clockevents state machine will assume that device is already where it should be and doesn't need to be updated. To avoid this problem we should suspend ticks on all VCPUs during suspend. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-04-27xen/grant: introduce func gnttab_unmap_refs_sync()Bob Liu1-0/+1
There are several place using gnttab async unmap and wait for completion, so move the common code to a function gnttab_unmap_refs_sync(). Signed-off-by: Bob Liu <bob.liu@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-04-15xenbus_client: Extend interface to support multi-page ringWei Liu1-6/+14
Originally Xen PV drivers only use single-page ring to pass along information. This might limit the throughput between frontend and backend. The patch extends Xenbus driver to support multi-page ring, which in general should improve throughput if ring is the bottleneck. Changes to various frontend / backend to adapt to the new interface are also included. Affected Xen drivers: * blkfront/back * netfront/back * pcifront/back * scsifront/back * vtpmfront The interface is documented, as before, in xenbus_client.c. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Bob Liu <bob.liu@oracle.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.