aboutsummaryrefslogtreecommitdiffstats
path: root/include (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-12-30net: dsa: sja1105: Use PTP core's dedicated kernel thread for RX timestampingVladimir Oltean3-20/+16
And move the queue of skb's waiting for RX timestamps into the ptp_data structure, since it isn't needed if PTP is not compiled. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30ptp: introduce ptp_cancel_worker_syncVladimir Oltean2-0/+15
In order to effectively use the PTP kernel thread for tasks such as timestamping packets, allow the user control over stopping it, which is needed e.g. when the timestamping queues must be drained. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30sfc: avoid duplicate error handling code in 'efx_ef10_sriov_set_vf_mac()'Christophe JAILLET1-3/+2
'eth_zero_addr()' is already called in the error handling path. This is harmless, but there is no point in calling it twice, so remove one. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30tcp_cubic: refactor code to perform a divide only when neededEric Dumazet1-23/+28
Neal Cardwell suggested to not change ca->delay_min and apply the ack delay cushion only when Hystart ACK train is still under consideration. This should avoid a 64bit divide unless needed. Tested: 40Gbit(mlx4) testbed (with sch_fq as packet scheduler) $ echo -n 'file tcp_cubic.c +p' >/sys/kernel/debug/dynamic_debug/control $ nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpaa24 -l -4000000; done;nstat|egrep "Hystart" 14815 16280 15293 15563 11574 15145 14789 18548 16972 12520 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 1396 0.0 $ dmesg | tail -10 [ 4873.951350] hystart_ack_train (116 > 93) delay_min 24 (+ ack_delay 69) cwnd 80 [ 4875.155379] hystart_ack_train (55 > 50) delay_min 21 (+ ack_delay 29) cwnd 160 [ 4876.333921] hystart_ack_train (69 > 62) delay_min 23 (+ ack_delay 39) cwnd 130 [ 4877.519037] hystart_ack_train (69 > 60) delay_min 22 (+ ack_delay 38) cwnd 130 [ 4878.701559] hystart_ack_train (87 > 63) delay_min 24 (+ ack_delay 39) cwnd 160 [ 4879.844597] hystart_ack_train (93 > 50) delay_min 21 (+ ack_delay 29) cwnd 216 [ 4880.956650] hystart_ack_train (74 > 67) delay_min 20 (+ ack_delay 47) cwnd 108 [ 4882.098500] hystart_ack_train (61 > 57) delay_min 23 (+ ack_delay 34) cwnd 130 [ 4883.262056] hystart_ack_train (72 > 67) delay_min 21 (+ ack_delay 46) cwnd 130 [ 4884.418760] hystart_ack_train (74 > 67) delay_min 29 (+ ack_delay 38) cwnd 152 10Gbit(bnx2x) testbed (with sch_fq as packet scheduler) $ echo -n 'file tcp_cubic.c +p' >/sys/kernel/debug/dynamic_debug/control $ nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpk52 -l -4000000; done;nstat|egrep "Hystart" 7050 7065 7100 6900 7202 7263 7189 6869 7463 7034 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 3199 0.0 $ dmesg | tail -10 [ 176.920012] hystart_ack_train (161 > 141) delay_min 83 (+ ack_delay 58) cwnd 264 [ 179.144645] hystart_ack_train (164 > 159) delay_min 120 (+ ack_delay 39) cwnd 444 [ 181.354527] hystart_ack_train (214 > 168) delay_min 125 (+ ack_delay 43) cwnd 436 [ 183.539565] hystart_ack_train (170 > 147) delay_min 96 (+ ack_delay 51) cwnd 326 [ 185.727309] hystart_ack_train (177 > 160) delay_min 61 (+ ack_delay 99) cwnd 128 [ 187.947142] hystart_ack_train (184 > 167) delay_min 123 (+ ack_delay 44) cwnd 367 [ 190.166680] hystart_ack_train (230 > 153) delay_min 116 (+ ack_delay 37) cwnd 444 [ 192.327285] hystart_ack_train (210 > 206) delay_min 86 (+ ack_delay 120) cwnd 152 [ 194.511392] hystart_ack_train (173 > 151) delay_min 94 (+ ack_delay 57) cwnd 239 [ 196.736023] hystart_ack_train (149 > 146) delay_min 105 (+ ack_delay 41) cwnd 399 Fixes: 42f3a8aaae66 ("tcp_cubic: tweak Hystart detection for short RTT flows") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Neal Cardwell <ncardwell@google.com> Link: https://www.spinics.net/lists/netdev/msg621886.html Link: https://www.spinics.net/lists/netdev/msg621797.html Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28net: dsa: Deny PTP on master if switch supports itVladimir Oltean1-0/+30
It is possible to kill PTP on a DSA switch completely and absolutely, until a reboot, with a simple command: tcpdump -i eth2 -j adapter_unsynced where eth2 is the switch's DSA master. Why? Well, in short, the PTP API in place today is a bit rudimentary and relies on applications to retrieve the TX timestamps by polling the error queue and looking at the cmsg structure. But there is no timestamp identification of any sorts (except whether it's HW or SW), you don't know how many more timestamps are there to come, which one is this one, from whom it is, etc. In other words, the SO_TIMESTAMPING API is fundamentally limited in that you can get a single HW timestamp from the stack. And the "-j adapter_unsynced" flag of tcpdump enables hardware timestamping. So let's imagine what happens when the DSA master decides it wants to deliver TX timestamps to the skb's socket too: - The timestamp that the user space sees is taken by the DSA master. Whereas the RX timestamp will eventually be overwritten by the DSA switch. So the RX and TX timestamps will be in different time bases (aka garbage). - The user space applications have no way to deal with the second (real) TX timestamp finally delivered by the DSA switch, or even to know to wait for it. Take ptp4l from the linuxptp project, for example. This is its behavior after running tcpdump, before the patch: ptp4l[172]: [6469.594] Unexpected data on socket err queue: ptp4l[172]: [6469.693] rms 8 max 16 freq -21257 +/- 11 delay 748 +/- 0 ptp4l[172]: [6469.711] Unexpected data on socket err queue: ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 03 aa 05 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: [6469.721] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 10 02 ptp4l[172]: 0010 00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 01 c6 b1 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: [6469.838] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 10 02 ptp4l[172]: 0010 00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 03 aa 06 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: [6469.848] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 13 02 ptp4l[172]: 0010 00 36 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 04 1a 45 05 7f ptp4l[172]: 0030 00 00 5e 05 41 32 27 c2 1a 68 00 04 9f ff fe 05 ptp4l[172]: 0040 de 06 00 01 ptp4l[172]: [6469.855] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 10 02 ptp4l[172]: 0010 00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 01 c6 b2 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: [6469.974] Unexpected data on socket err queue: ptp4l[172]: 0000 01 80 c2 00 00 0e 00 1f 7b 63 02 48 88 f7 10 02 ptp4l[172]: 0010 00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ptp4l[172]: 0020 00 00 00 1f 7b ff fe 63 02 48 00 03 aa 07 00 fd ptp4l[172]: 0030 00 00 00 00 00 00 00 00 00 00 The ptp4l program itself is heavily patched to show this (more details here [0]). Otherwise, by default it just hangs. On the other hand, with the DSA patch to disallow HW timestamping applied: tcpdump -i eth2 -j adapter_unsynced tcpdump: SIOCSHWTSTAMP failed: Device or resource busy So it is a fact of life that PTP timestamping on the DSA master is incompatible with timestamping on the switch MAC, at least with the current API. And if the switch supports PTP, taking the timestamps from the switch MAC is highly preferable anyway, due to the fact that those don't contain the queuing latencies of the switch. So just disallow PTP on the DSA master if there is any PTP-capable switch attached. [0]: https://sourceforge.net/p/linuxptp/mailman/message/36880648/ Fixes: 0336369d3a4d ("net: dsa: forward hardware timestamping ioctls to switch driver") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28gianfar: Fix TX timestamping with a stacked DSA driverVladimir Oltean1-3/+7
The driver wrongly assumes that it is the only entity that can set the SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the gfar_clean_tx_ring function, where the TX timestamp is collected if necessary, the aforementioned bit is used to discriminate whether or not the TX timestamp should be delivered to the socket's error queue. But a stacked driver such as a DSA switch can also set the SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in order to denote that the hardware timestamping process is undergoing. Therefore, gianfar would misinterpret the "in progress" bit as being its own, and deliver a second skb clone in the socket's error queue, completely throwing off a PTP process which is not expecting to receive it, _even though_ TX timestamping is not enabled for gianfar. There have been discussions [0] as to whether non-MAC drivers need or not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2 timestamps, a sw and a hw one, to applications which only expect one). But as of this patch, there are at least 2 PTP drivers that would break in conjunction with gianfar: the sja1105 DSA switch and the felix switch, by way of its ocelot core driver. So regardless of that conclusion, fix the gianfar driver to not do stuff based on flags set by others and not intended for it. [0]: https://www.spinics.net/lists/netdev/msg619699.html Fixes: f0ee7acfcdd4 ("gianfar: Add hardware TX timestamping support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28net/wan/fsl_ucc_hdlc: remove set but not used variables 'ut_info' and 'ret'Chen Zhou1-9/+5
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wan/fsl_ucc_hdlc.c: In function ucc_hdlc_irq_handler: drivers/net/wan/fsl_ucc_hdlc.c:643:23: warning: variable ut_info set but not used [-Wunused-but-set-variable] drivers/net/wan/fsl_ucc_hdlc.c: In function uhdlc_suspend: drivers/net/wan/fsl_ucc_hdlc.c:880:23: warning: variable ut_info set but not used [-Wunused-but-set-variable] drivers/net/wan/fsl_ucc_hdlc.c: In function uhdlc_resume: drivers/net/wan/fsl_ucc_hdlc.c:925:6: warning: variable ret set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: provide link state with LINKSTATE_GET requestMichal Kubecek9-6/+146
Implement LINKSTATE_GET netlink request to get link state information. At the moment, only link up flag as provided by ETHTOOL_GLINK ioctl command is returned. LINKSTATE_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: add LINKMODES_NTF notificationMichal Kubecek5-2/+12
Send ETHTOOL_MSG_LINKMODES_NTF notification message whenever device link settings or advertised modes are modified using ETHTOOL_MSG_LINKMODES_SET netlink message or ETHTOOL_SLINKSETTINGS or ETHTOOL_SSET ioctl commands. The notification message has the same format as reply to LINKMODES_GET request. ETHTOOL_MSG_LINKMODES_SET netlink request only triggers the notification if there is a change but the ioctl command handlers do not check if there is an actual change and trigger the notification whenever the commands are executed. As all work is done by ethnl_default_notify() handler and callback functions introduced to handle LINKMODES_GET requests, all that remains is adding entries for ETHTOOL_MSG_LINKMODES_NTF into ethnl_notify_handlers and ethnl_default_notify_ops lookup tables and calls to ethtool_notify() where needed. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: set link modes related data with LINKMODES_SET requestMichal Kubecek5-0/+269
Implement LINKMODES_SET netlink request to set advertised linkmodes and related attributes as ETHTOOL_SLINKSETTINGS and ETHTOOL_SSET commands do. The request allows setting autonegotiation flag, speed, duplex and advertised link modes. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: provide link mode information with LINKMODES_GET requestMichal Kubecek7-1/+207
Implement LINKMODES_GET netlink request to get link modes related information provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands. This request provides supported, advertised and peer advertised link modes, autonegotiation flag, speed and duplex. LINKMODES_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: add LINKINFO_NTF notificationMichal Kubecek5-2/+16
Send ETHTOOL_MSG_LINKINFO_NTF notification message whenever device link settings are modified using ETHTOOL_MSG_LINKINFO_SET netlink message or ETHTOOL_SLINKSETTINGS or ETHTOOL_SSET ioctl commands. The notification message has the same format as reply to LINKINFO_GET request. ETHTOOL_MSG_LINKINFO_SET netlink request only triggers the notification if there is a change but the ioctl command handlers do not check if there is an actual change and trigger the notification whenever the commands are executed. As all work is done by ethnl_default_notify() handler and callback functions introduced to handle LINKINFO_GET requests, all that remains is adding entries for ETHTOOL_MSG_LINKINFO_NTF into ethnl_notify_handlers and ethnl_default_notify_ops lookup tables and calls to ethtool_notify() where needed. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: add default notification handlerMichal Kubecek2-1/+92
The ethtool netlink notifications have the same format as related GET replies so that if generic GET handling framework is used to process GET requests, its callbacks and instance of struct get_request_ops can be also used to compose corresponding notification message. Provide function ethnl_std_notify() to be used as notification handler in ethnl_notify_handlers table. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: set link settings with LINKINFO_SET requestMichal Kubecek5-2/+101
Implement LINKINFO_SET netlink request to set link settings queried by LINKINFO_GET message. Only physical port, phy MDIO address and MDI(-X) control can be set, attempt to modify MDI(-X) status and transceiver is rejected. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: provide link settings with LINKINFO_GET requestMichal Kubecek9-51/+209
Implement LINKINFO_GET netlink request to get basic link settings provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands. This request provides settings not directly related to autonegotiation and link mode selection: physical port, phy MDIO address, MDI(-X) status, MDI(-X) control and transceiver. LINKINFO_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: provide string sets with STRSET_GET requestMichal Kubecek7-3/+570
Requests a contents of one or more string sets, i.e. indexed arrays of strings; this information is provided by ETHTOOL_GSSET_INFO and ETHTOOL_GSTRINGS commands of ioctl interface. Unlike ioctl interface, all information can be retrieved with one request and mulitple string sets can be requested at once. There are three types of requests: - no NLM_F_DUMP, no device: get "global" stringsets - no NLM_F_DUMP, with device: get string sets related to the device - NLM_F_DUMP, no device: get device related string sets for all devices Client can request either all string sets of given type (global or device related) or only specific sets. With ETHTOOL_A_STRSET_COUNTS flag set, only set sizes (numbers of strings) are returned. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: default handlers for GET requestsMichal Kubecek2-1/+436
Significant part of GET request processing is common for most request types but unfortunately it cannot be easily separated from type specific code as we need to alternate between common actions (parsing common request header, allocating message and filling netlink/genetlink headers etc.) and specific actions (querying the device, composing the reply). The processing also happens in three different situations: "do" request, "dump" request and notification, each doing things in slightly different way. The request specific code is implemented in four or five callbacks defined in an instance of struct get_request_ops: parse_request() - parse incoming message prepare_data() - retrieve data from driver or NIC reply_size() - estimate reply message size fill_reply() - compose reply message cleanup_data() - (optional) clean up additional data Other members of struct get_request_ops describe the data structure holding information from client request and data used to compose the message. The default handlers ethnl_default_doit(), ethnl_default_dumpit(), ethnl_default_start() and ethnl_default_done() can be then used in genl_ops handler. Notification handler will be introduced in a later patch. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: support for netlink notificationsMichal Kubecek4-0/+48
Add infrastructure for ethtool netlink notifications. There is only one multicast group "monitor" which is used to notify userspace about changes and actions performed. Notification messages (types using suffix _NTF) share the format with replies to GET requests. Notifications are supposed to be broadcasted on every configuration change, whether it is done using the netlink interface or ioctl one. Netlink SET requests only trigger a notification if some data is actually changed. To trigger an ethtool notification, both ethtool netlink and external code use ethtool_notify() helper. This helper requires RTNL to be held and may sleep. Handlers sending messages for specific notification message types are registered in ethnl_notify_handlers array. As notifications can be triggered from other code, ethnl_ok flag is used to prevent an attempt to send notification before genetlink family is registered. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: netlink bitset handlingMichal Kubecek5-1/+883
The ethtool netlink code uses common framework for passing arbitrary length bit sets to allow future extensions. A bitset can be a list (only one bitmap) or can consist of value and mask pair (used e.g. when client want to modify only some bits). A bitset can use one of two formats: verbose (bit by bit) or compact. Verbose format consists of bitset size (number of bits), list flag and an array of bit nests, telling which bits are part of the list or which bits are in the mask and which of them are to be set. In requests, bits can be identified by index (position) or by name. In replies, kernel provides both index and name. Verbose format is suitable for "one shot" applications like standard ethtool command as it avoids the need to either keep bit names (e.g. link modes) in sync with kernel or having to add an extra roundtrip for string set request (e.g. for private flags). Compact format uses one (list) or two (value/mask) arrays of 32-bit words to store the bitmap(s). It is more suitable for long running applications (ethtool in monitor mode or network management daemons) which can retrieve the names once and then pass only compact bitmaps to save space. Userspace requests can use either format; ETHTOOL_FLAG_COMPACT_BITSETS flag in request header tells kernel which format to use in reply. Notifications always use compact format. As some code uses arrays of unsigned long for internal representation and some arrays of u32 (or even a single u32), two sets of parse/compose helpers are introduced. To avoid code duplication, helpers for unsigned long arrays are implemented as wrappers around helpers for u32 arrays. There are two reasons for this choice: (1) u32 arrays are more frequent in ethtool code and (2) unsigned long array can be always interpreted as an u32 array on little endian 64-bit and all 32-bit architectures while we would need special handling for odd number of u32 words in the opposite direction. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: helper functions for netlink interfaceMichal Kubecek3-0/+392
Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: introduce ethtool netlink interfaceMichal Kubecek8-1/+318
Basic genetlink and init infrastructure for the netlink interface, register genetlink family "ethtool". Add CONFIG_ETHTOOL_NETLINK Kconfig option to make the build optional. Add initial overall interface description into Documentation/networking/ethtool-netlink.rst, further patches will add more detailed information. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27sctp: do trace_sctp_probe after SACK validation and checkKevin Kou1-9/+9
The function sctp_sf_eat_sack_6_2 now performs the Verification Tag validation, Chunk length validation, Bogu check, and also the detection of out-of-order SACK based on the RFC2960 Section 6.2 at the beginning, and finally performs the further processing of SACK. The trace_sctp_probe now triggered before the above necessary validation and check. this patch is to do the trace_sctp_probe after the chunk sanity tests, but keep doing trace if the SACK received is out of order, for the out-of-order SACK is valuable to congestion control debugging. v1->v2: - keep doing SCTP trace if the SACK is out of order as Marcelo's suggestion. v2->v3: - regenerate the patch as v2 generated on top of v1, and add 'net-next' tag to the new one as Marcelo's comments. Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27mv88e6xxx: Add serdes Rx statisticsNikita Yushchenko3-3/+109
If packet checker is enabled in the serdes, then Rx counter registers start working, and no side effects have been detected. This patch enables packet checker automatically when powering serdes on, and exposes Rx counter registers via ethtool statistics interface. Code partially basded by older attempt by Andrew Lunn. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27net: ena: remove set but not used variable 'rx_ring'YueHaibing1-3/+0
drivers/net/ethernet/amazon/ena/ena_netdev.c: In function ena_xdp_xmit_buff: drivers/net/ethernet/amazon/ena/ena_netdev.c:316:19: warning: variable rx_ring set but not used [-Wunused-but-set-variable] commit 548c4940b9f1 ("net: ena: Implement XDP_TX action") left behind this unused variable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27net: dsa: qca: ar9331: drop pointless static qualifier in ar9331_sw_mbus_initMao Wenan1-1/+1
There is no need to set variable 'mbus' static since new value always be assigned before use it. Signed-off-by: Mao Wenan <maowenan@huawei.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ppp: Remove redundant BUG_ON() check in ppp_pernetXu Wang1-2/+0
Passing NULL to ppp_pernet causes a crash via BUG_ON. Dereferencing net in net_generic() also has the same effect. This patch removes the redundant BUG_ON check on the same parameter. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27tcp_cubic: make Hystart aware of pacingEric Dumazet1-1/+12
For years we disabled Hystart ACK train detection at Google because it was fooled by TCP pacing. ACK train detection uses a simple heuristic, detecting if we receive ACK past half the RTT, to exit slow start before hitting the bottleneck and experience massive drops. But pacing by design might delay packets up to RTT/2, so we need to tweak the Hystart logic to be aware of this extra delay. Tested: Added a 100 usec delay at receiver. Before: nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpaa24 -l -4000000; done;nstat|egrep "Hystart" 9117 7057 9553 8300 7030 6849 9533 10126 6876 8473 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 1230 0.0 After : nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpaa24 -l -4000000; done;nstat|egrep "Hystart" 9845 10103 10866 11096 11936 11487 11773 12188 11066 11894 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 6462 0.0 Disabling Hystart ACK Train detection gives similar numbers echo 2 >/sys/module/tcp_cubic/parameters/hystart_detect nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpaa24 -l -4000000; done;nstat|egrep "Hystart" 11173 10954 12455 10627 11578 11583 11222 10880 10665 11366 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27tcp_cubic: tweak Hystart detection for short RTT flowsEric Dumazet1-2/+21
After switching ca->delay_min to usec resolution, we exit slow start prematurely for very low RTT flows, setting snd_ssthresh to 20. The reason is that delay_min is fed with RTT of small packet trains. Then as cwnd is increased, TCP sends bigger TSO packets. LRO/GRO aggregation and/or interrupt mitigation strategies on receiver tend to inflate RTT samples. Fix this by adding to delay_min the expected delay of two TSO packets, given current pacing rate. Tested: Sender uses pfifo_fast qdisc Before : $ nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpaa24 -l -4000000; done;nstat|egrep "Hystart" 11348 11707 11562 11428 11773 11534 9878 11693 10597 10968 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 200 0.0 After : $ nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpaa24 -l -4000000; done;nstat|egrep "Hystart" 14877 14517 15797 18466 17376 14833 17558 17933 16039 18059 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 1670 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27tcp_cubic: switch bictcp_clock() to usec resolutionEric Dumazet1-21/+14
Current 1ms clock feeds ca->round_start, ca->delay_min, ca->last_ack. This is quite problematic for data-center flows, where delay_min is way below 1 ms. This means Hystart Train detection triggers every time jiffies value is updated, since "((s32)(now - ca->round_start) > ca->delay_min >> 4)" expression becomes true. This kind of random behavior can be solved by reusing the existing usec timestamp that TCP keeps in tp->tcp_mstamp Note that a followup patch will tweak things a bit, because during slow start, GRO aggregation on receivers naturally increases the RTT as TSO packets gradually come to ~64KB size. To recap, right after this patch CUBIC Hystart train detection is more aggressive, since short RTT flows might exit slow start at cwnd = 20, instead of being possibly unbounded. Following patch will address this problem. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27tcp_cubic: remove one conditional from hystart_update()Eric Dumazet1-2/+2
If we initialize ca->curr_rtt to ~0U, we do not need to test for zero value in hystart_update() We only read ca->curr_rtt if at least HYSTART_MIN_SAMPLES have been processed, and thus ca->curr_rtt will have a sane value. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27tcp_cubic: optimize hystart_update()Eric Dumazet1-6/+3
We do not care which bit in ca->found is set. We avoid accessing hystart and hystart_detect unless really needed, possibly avoiding one cache line miss. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27bpftool: Make skeleton C code compilable with C++ compilerAndrii Nakryiko3-6/+16
When auto-generated BPF skeleton C code is included from C++ application, it triggers compilation error due to void * being implicitly casted to whatever target pointer type. This is supported by C, but not C++. To solve this problem, add explicit casts, where necessary. To ensure issues like this are captured going forward, add skeleton usage in test_cpp test. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191226210253.3132060-1-andriin@fb.com
2019-12-26s390/qeth: remove QETH_RX_PULL_LENJulian Wiedmann2-3/+4
Since commit f677fcb9aeb6 ("s390/qeth: ensure linear access to packet headers"), the CQ-specific skbs are allocated with a slightly bigger linear part than necessary. Shrink it down to the maximum that's needed by qeth_extract_skb(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26s390/qeth: use napi_gro_frags() for SG skbsJulian Wiedmann1-17/+50
For non-linear packets, get the skb for attaching the page fragments from napi_get_frags() so that it can be recycled during GRO. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26s390/qeth: consolidate RX codeJulian Wiedmann4-174/+153
To reduce the path length and levels of indirection, move the RX processing from the sub-drivers into the core. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26af_packet: refactoring code for prb_calc_retire_blk_tmoMao Wenan1-18/+12
If __ethtool_get_link_ksettings() is failed and with non-zero value, prb_calc_retire_blk_tmo() should return DEFAULT_PRB_RETIRE_TOV firstly. This patch is to refactory code and make it more readable. Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26xen-netback: support dynamic unbind/bindPaul Durrant3-7/+28
By re-attaching RX, TX, and CTL rings during connect() rather than assuming they are freshly allocated (i.e. assuming the counters are zero), and avoiding forcing state to Closed in netback_remove() it is possible for vif instances to be unbound and re-bound from and to (respectively) a running guest. Dynamic unbind/bind is a highly useful feature for a backend module as it allows it to be unloaded and re-loaded (i.e. updated) without requiring domUs to be halted. This has been tested by running iperf as a server in the test VM and then running a client against it in a continuous loop, whilst also running: while true; do echo vif-$DOMID-$VIF >unbind; echo down; rmmod xen-netback; echo unloaded; modprobe xen-netback; cd $(pwd); brctl addif xenbr0 vif$DOMID.$VIF; ip link set vif$DOMID.$VIF up; echo up; sleep 5; done in dom0 from /sys/bus/xen-backend/drivers/vif to continuously unbind, unload, re-load, re-bind and re-plumb the backend. Clearly a performance drop was seen but no TCP connection resets were observed during this test and moreover a parallel SSH connection into the guest remained perfectly usable throughout. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26net: phy: realtek: add support for configuring the RX delay on RTL8211FMartin Blumenstingl1-10/+36
On RTL8211F the RX and TX delays (2ns) can be configured in two ways: - pin strapping (RXD1 for the TX delay and RXD0 for the RX delay, LOW means "off" and HIGH means "on") which is read during PHY reset - using software to configure the TX and RX delay registers So far only the configuration using pin strapping has been supported. Add support for enabling or disabling the RGMII RX delay based on the phy-mode to be able to get the RX delay into a known state. This is important because the RX delay has to be coordinated between the PHY, MAC and the PCB design (trace length). With an invalid RX delay applied (for example if both PHY and MAC add a 2ns RX delay) Ethernet may not work at all. Also add debug logging when configuring the RX delay (just like the TX delay) because this is a common source of problems. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26net: phy: realtek: add logging for the RGMII TX delay configurationMartin Blumenstingl1-1/+18
RGMII requires a delay of 2ns between the data and the clock signal. There are at least three ways this can happen. One possibility is by having the PHY generate this delay. This is a common source for problems (for example with slow TX speeds or packet loss when sending data). The TX delay configuration of the RTL8211F PHY can be set either by pin-strappping the RXD1 pin (HIGH means enabled, LOW means disabled) or through configuring a paged register. The setting from the RXD1 pin is also reflected in the register. Add debug logging to the TX delay configuration on RTL8211F so it's easier to spot these issues (for example if the TX delay is enabled for both, the RTL8211F PHY and the MAC). This is especially helpful because there is no public datasheet for the RTL8211F PHY available with all the RX/TX delay specifics. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Remove FIB entry list from FIB nodeIdo Schimmel1-151/+74
As explained in previous patches, the driver no longer needs to maintain a list of identical FIB entries (i.e, same {tb_id, prefix, prefix length}) and therefore each FIB node can only store one FIB entry. Remove the FIB entry list and simplify the code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Consolidate identical functionsIdo Schimmel1-49/+22
After the last patch mlxsw_sp_fib{4,6}_node_entry_link() and mlxsw_sp_fib{4,6}_node_entry_unlink() are identical and can therefore be consolidated into the same common function. Perform the consolidation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Make route creation and destruction symmetricIdo Schimmel1-3/+15
Host routes that perform decapsulation of IP in IP tunnels have a special adjacency entry linked to them. This entry stores information such as the expected underlay source IP. When the route is deleted this entry needs to be freed. The allocation of the adjacency entry happens in mlxsw_sp_fib4_entry_type_set(), but it is freed in mlxsw_sp_fib4_node_entry_unlink(). Create a new function - mlxsw_sp_fib4_entry_type_unset() - and free the adjacency entry there. This will allow us to consolidate mlxsw_sp_fib{4,6}_node_entry_unlink() in the next patch. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Eliminate dead codeIdo Schimmel1-10/+0
Since the driver no longer maintains a list of identical routes there is no route to promote when a route is deleted. Remove that code that took care of it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Remove unnecessary checksIdo Schimmel1-15/+1
Now that the networking stack takes care of only notifying the routes of interest, we do not need to maintain a list of identical routes. Remove the check that tests if the route is the first route in the FIB node. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26bonding: rename AD_STATE_* to LACP_STATE_*Andy Roulin2-64/+64
As the LACP actor/partner state is now part of the uapi, rename the 3ad state defines with LACP prefix. The LACP prefix is preferred over BOND_3AD as the LACP standard moved to 802.1AX. Fixes: 826f66b30c2e3 ("bonding: move 802.3ad port state flags to uapi") Signed-off-by: Andy Roulin <aroulin@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26sctp: move trace_sctp_probe_path into sctp_outq_sackKevin Kou2-9/+6
The original patch bringed in the "SCTP ACK tracking trace event" feature was committed at Dec.20, 2017, it replaced jprobe usage with trace events, and bringed in two trace events, one is TRACE_EVENT(sctp_probe), another one is TRACE_EVENT(sctp_probe_path). The original patch intended to trigger the trace_sctp_probe_path in TRACE_EVENT(sctp_probe) as below code, +TRACE_EVENT(sctp_probe, + + TP_PROTO(const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + struct sctp_chunk *chunk), + + TP_ARGS(ep, asoc, chunk), + + TP_STRUCT__entry( + __field(__u64, asoc) + __field(__u32, mark) + __field(__u16, bind_port) + __field(__u16, peer_port) + __field(__u32, pathmtu) + __field(__u32, rwnd) + __field(__u16, unack_data) + ), + + TP_fast_assign( + struct sk_buff *skb = chunk->skb; + + __entry->asoc = (unsigned long)asoc; + __entry->mark = skb->mark; + __entry->bind_port = ep->base.bind_addr.port; + __entry->peer_port = asoc->peer.port; + __entry->pathmtu = asoc->pathmtu; + __entry->rwnd = asoc->peer.rwnd; + __entry->unack_data = asoc->unack_data; + + if (trace_sctp_probe_path_enabled()) { + struct sctp_transport *sp; + + list_for_each_entry(sp, &asoc->peer.transport_addr_list, + transports) { + trace_sctp_probe_path(sp, asoc); + } + } + ), But I found it did not work when I did testing, and trace_sctp_probe_path had no output, I finally found that there is trace buffer lock operation(trace_event_buffer_reserve) in include/trace/trace_events.h: static notrace void \ trace_event_raw_event_##call(void *__data, proto) \ { \ struct trace_event_file *trace_file = __data; \ struct trace_event_data_offsets_##call __maybe_unused __data_offsets;\ struct trace_event_buffer fbuffer; \ struct trace_event_raw_##call *entry; \ int __data_size; \ \ if (trace_trigger_soft_disabled(trace_file)) \ return; \ \ __data_size = trace_event_get_offsets_##call(&__data_offsets, args); \ \ entry = trace_event_buffer_reserve(&fbuffer, trace_file, \ sizeof(*entry) + __data_size); \ \ if (!entry) \ return; \ \ tstruct \ \ { assign; } \ \ trace_event_buffer_commit(&fbuffer); \ } The reason caused no output of trace_sctp_probe_path is that trace_sctp_probe_path written in TP_fast_assign part of TRACE_EVENT(sctp_probe), and it will be placed( { assign; } ) after the trace_event_buffer_reserve() when compiler expands Macro, entry = trace_event_buffer_reserve(&fbuffer, trace_file, \ sizeof(*entry) + __data_size); \ \ if (!entry) \ return; \ \ tstruct \ \ { assign; } \ so trace_sctp_probe_path finally can not acquire trace_event_buffer and return no output, that is to say the nest of tracepoint entry function is not allowed. The function call flow is: trace_sctp_probe() -> trace_event_raw_event_sctp_probe() -> lock buffer -> trace_sctp_probe_path() -> trace_event_raw_event_sctp_probe_path() --nested -> buffer has been locked and return no output. This patch is to remove trace_sctp_probe_path from the TP_fast_assign part of TRACE_EVENT(sctp_probe) to avoid the nest of entry function, and trigger sctp_probe_path_trace in sctp_outq_sack. After this patch, you can enable both events individually, # cd /sys/kernel/debug/tracing # echo 1 > events/sctp/sctp_probe/enable # echo 1 > events/sctp/sctp_probe_path/enable Or, you can enable all the events under sctp. # echo 1 > events/sctp/enable Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26netfilter: nft_meta: add support for slave device ifindex matchingFlorian Westphal2-7/+73
Allow to match on vrf slave ifindex or name. In case there was no slave interface involved, store 0 in the destination register just like existing iif/oif matching. sdif(name) is restricted to the ipv4/ipv6 input and forward hooks, as it depends on ip(6) stack parsing/storing info in skb->cb[]. Cc: Martin Willi <martin@strongswan.org> Cc: David Ahern <dsahern@kernel.org> Cc: Shrijeet Mukherjee <shrijeet@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-26netfilter: nft_meta: place rtclassid handling in a helperFlorian Westphal1-6/+16
skb_dst is an inline helper with a WARN_ON(), so this is a bit more code than it looks like. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-26netfilter: nft_meta: place prandom handling in a helperFlorian Westphal1-4/+9
Move this out of the main eval loop, the numgen expression provides a better alternative to meta random. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-26netfilter: nft_meta: move all interface related keys to helperFlorian Westphal1-25/+70
Reduces repetiveness and reduces size of meta eval function. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.