aboutsummaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2022-02-04cpufreq: Move to_gov_attr_set() to cpufreq.hKevin Hao1-0/+5
So it can be reused by other codes. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-04lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFIJason A. Donenfeld1-15/+25
blake2s_compress_generic is weakly aliased by blake2s_compress. The current harness for function selection uses a function pointer, which is ordinarily inlined and resolved at compile time. But when Clang's CFI is enabled, CFI still triggers when making an indirect call via a weak symbol. This seems like a bug in Clang's CFI, as though it's bucketing weak symbols and strong symbols differently. It also only seems to trigger when "full LTO" mode is used, rather than "thin LTO". [ 0.000000][ T0] Kernel panic - not syncing: CFI failure (target: blake2s_compress_generic+0x0/0x1444) [ 0.000000][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-mainline-06981-g076c855b846e #1 [ 0.000000][ T0] Hardware name: MT6873 (DT) [ 0.000000][ T0] Call trace: [ 0.000000][ T0] dump_backtrace+0xfc/0x1dc [ 0.000000][ T0] dump_stack_lvl+0xa8/0x11c [ 0.000000][ T0] panic+0x194/0x464 [ 0.000000][ T0] __cfi_check_fail+0x54/0x58 [ 0.000000][ T0] __cfi_slowpath_diag+0x354/0x4b0 [ 0.000000][ T0] blake2s_update+0x14c/0x178 [ 0.000000][ T0] _extract_entropy+0xf4/0x29c [ 0.000000][ T0] crng_initialize_primary+0x24/0x94 [ 0.000000][ T0] rand_initialize+0x2c/0x6c [ 0.000000][ T0] start_kernel+0x2f8/0x65c [ 0.000000][ T0] __primary_switched+0xc4/0x7be4 [ 0.000000][ T0] Rebooting in 5 seconds.. Nonetheless, the function pointer method isn't so terrific anyway, so this patch replaces it with a simple boolean, which also gets inlined away. This successfully works around the Clang bug. In general, I'm not too keen on all of the indirection involved here; it clearly does more harm than good. Hopefully the whole thing can get cleaned up down the road when lib/crypto is overhauled more comprehensively. But for now, we go with a simple bandaid. Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in") Link: https://github.com/ClangBuiltLinux/linux/issues/1567 Reported-by: Miles Chen <miles.chen@mediatek.com> Tested-by: Miles Chen <miles.chen@mediatek.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-04Merge tag 'ceph-for-5.17-rc3' of git://github.com/ceph/ceph-clientLinus Torvalds2-0/+6
Pull ceph fixes from Ilya Dryomov: "A patch to make it possible to disable zero copy path in the messenger to avoid checksum or authentication tag mismatches and ensuing session resets in case the destination buffer isn't guaranteed to be stable" * tag 'ceph-for-5.17-rc3' of git://github.com/ceph/ceph-client: libceph: optionally use bounce buffer on recv path in crc mode libceph: make recv path in secure mode work the same as send path
2022-02-04Merge tag '5.17-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds1-0/+7
Pull cifs fixes from Steve French: "SMB3 client fixes including: - multiple fscache related fixes, reenabling ability to read/write to cached files for cifs.ko (that was temporarily disabled for cifs.ko a few weeks ago due to the recent fscache changes) - also includes a new fscache helper function ("query_occupancy") used by above - fix for multiuser mounts and NTLMSSP auth (workstation name) for stable - fix locking ordering problem in multichannel code - trivial malformed comment fix" * tag '5.17-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix workstation_name for multiuser mounts Invalidate fscache cookie only when inode attributes are changed. cifs: Fix the readahead conversion to manage the batch when reading from cache cifs: Implement cache I/O by accessing the cache directly netfs, cachefiles: Add a method to query presence of data in the cache cifs: Transition from ->readpages() to ->readahead() cifs: unlock chan_lock before calling cifs_put_tcp_session Fix a warning about a malformed kernel doc comment in cifs
2022-02-04mm/pgtable: define pte_index so that preprocessor could recognize itMike Rapoport1-0/+1
Since commit 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions") pte_index is a static inline and there is no define for it that can be recognized by the preprocessor. As a result, vm_insert_pages() uses slower loop over vm_insert_page() instead of insert_pages() that amortizes the cost of spinlock operations when inserting multiple pages. Link: https://lkml.kernel.org/r/20220111145457.20748-1-rppt@kernel.org Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reported-by: Christian Dietrich <stettberger@dokucode.de> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-02-04mm/page_table_check: check entries at pmd levelsPasha Tatashin1-0/+19
syzbot detected a case where the page table counters were not properly updated. syzkaller login: ------------[ cut here ]------------ kernel BUG at mm/page_table_check.c:162! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 3099 Comm: pasha Not tainted 5.16.0+ #48 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIO4 RIP: 0010:__page_table_check_zero+0x159/0x1a0 Call Trace: free_pcp_prepare+0x3be/0xaa0 free_unref_page+0x1c/0x650 free_compound_page+0xec/0x130 free_transhuge_page+0x1be/0x260 __put_compound_page+0x90/0xd0 release_pages+0x54c/0x1060 __pagevec_release+0x7c/0x110 shmem_undo_range+0x85e/0x1250 ... The repro involved having a huge page that is split due to uprobe event temporarily replacing one of the pages in the huge page. Later the huge page was combined again, but the counters were off, as the PTE level was not properly updated. Make sure that when PMD is cleared and prior to freeing the level the PTEs are updated. Link: https://lkml.kernel.org/r/20220131203249.2832273-5-pasha.tatashin@soleen.com Fixes: df4e817b7108 ("mm: page table check") Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Paul Turner <pjt@google.com> Cc: Wei Xu <weixugc@google.com> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-02-04powercap/drivers/dtpm: Add hierarchy creationDaniel Lezcano1-0/+15
The DTPM framework is available but without a way to configure it. This change provides a way to create a hierarchy of DTPM node where the power consumption reflects the sum of the children's power consumption. It is up to the platform to specify an array of dtpm nodes where each element has a pointer to its parent, except the top most one. The type of the node gives the indication of which initialization callback to call. At this time, we can create a virtual node, where its purpose is to be a parent in the hierarchy, and a DT node where the name describes its path. In order to ensure a nice self-encapsulation, the DTPM subsys array contains a couple of initialization functions, one to setup the DTPM backend and one to initialize it up. With this approach, the DTPM framework has a very few material to export. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220128163537.212248-3-daniel.lezcano@linaro.org
2022-02-04powercap/drivers/dtpm: Convert the init table section to a simple arrayDaniel Lezcano2-32/+3
The init table section is freed after the system booted. However the next changes will make per module the DTPM description, so the table won't be accessible when the module is loaded. In order to fix that, we should move the table to the data section where there are very few entries and that makes strange to add it there. The main goal of the table was to keep self-encapsulated code and we can keep it almost as it by using an array instead. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220128163537.212248-2-daniel.lezcano@linaro.org
2022-02-04mac80211: fix struct ieee80211_tx_info sizeAvraham Stern1-4/+15
The size of the status_driver_data field was not adjusted when the is_valid_ack_signal field was added. Since the size of struct ieee80211_tx_info is limited, replace the is_valid_ack_signal field with a flags field, and adjust the struct size accordingly. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.0ff363d4fa56.I45792c0187034a6d0e1c99a7db741996ef7caba3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04ieee80211: radiotap: fix -Wcast-qual warningsJohannes Berg1-2/+2
When enabling -Wcast-qual e.g. via W=3, we get a lot of warnings from this file, whenever it's included. Since the fixes are simple, just do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.cc733aeb1a18.I03396e1bf7a1af364cbd0916037f65d800035039@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04cfg80211: fix -Wcast-qual warningsJohannes Berg1-5/+5
When enabling -Wcast-qual e.g. via W=3, we get a lot of warnings from this file, whenever it's included. Since the fixes are simple, just do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.6a1d52213019.I92d82e7251cf712faa43fd09db3142327a3bce3d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04ieee80211: fix -Wcast-qual warningsJohannes Berg1-4/+4
When enabling -Wcast-qual e.g. via W=3, we get a lot of warnings from this file, whenever it's included. Since the fixes are simple, just do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.79ec4a4bab29.I8177a0c79d656c552e22c88931d8da06f2977896@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04firmware_loader: simplfy builtin or module checkLuis Chamberlain1-1/+1
The existing check is outdated and confuses developers. Use the already existing IS_REACHABLE() defined on kconfig.h which makes the intention much clearer. Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Ackd-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220112160053.723795-1-mcgrof@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04mux: Add support for reading mux state from consumer DT nodeAswath Govindraju1-0/+18
In some cases, we might need to provide the state of the mux to be set for the operation of a given peripheral. Therefore, pass this information using mux-states property. Link: https://lore.kernel.org/lkml/20211123081222.27979-1-a-govindraju@ti.com Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Rosin <peda@axentia.se> (minor edits) Link: https://lore.kernel.org/r/aac25be8-9515-a980-f7cb-709938c84822@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04serial: core: Fix the definition name in the comment of UPF_* flagsAndy Shevchenko1-1/+1
From day 1 the UPF_LAST_USER wasn't defined, a specific number of the last bit for userspace. Instead the code always relies on ASYNCB_LAST_USER. Fix comment accordingly. Fixes: 904326ecac02 ("tty,serial: Unify UPF_* and ASYNC_* flag definitions") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220203144521.16457-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04block: pass a block_device to bio_clone_fastChristoph Hellwig1-2/+4
Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-04block: clone crypto and integrity data in __bio_clone_fastChristoph Hellwig1-1/+1
__bio_clone_fast should also clone integrity and crypto data, as a clone without those is incomplete. Right now the only caller that can actually support crypto and integrity data (dm) does it manually for the one callchain that supports these, but we better do it properly in the core. Note that all callers except for the above mentioned one also don't need to handle failure at all, given that the integrity and crypto clones are based on mempool allocations that won't fail for sleeping allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-04tls: cap the output scatter list to something reasonableJakub Kicinski1-0/+17
TLS recvmsg() passes user pages as destination for decrypt. The decrypt operation is repeated record by record, each record being 16kB, max. TLS allocates an sg_table and uses iov_iter_get_pages() to populate it with enough pages to fit the decrypted record. Even though we decrypt a single message at a time we size the sg_table based on the entire length of the iovec. This leads to unnecessarily large allocations, risking triggering OOM conditions. Use iov_iter_truncate() / iov_iter_reexpand() to construct a "capped" version of iov_iter_npages(). Alternatively we could parametrize iov_iter_npages() to take the size as arg instead of using i->count, or do something else.. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-04Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller1-10/+0
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-02-03 This series contains updates to the i40e client header file and driver. Mateusz disables HW TC offload by default. Joe Damato removes a no longer used statistic. Jakub Kicinski removes an unused enum from the client header file. Jedrzej changes some admin queue commands to occur under atomic context and adds new functions for admin queue MAC VLAN filters to avoid a potential race that could occur due storing results in a structure that could be overwritten by the next admin queue call. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-04ata: libata-core: Introduce ATA_HORKAGE_NO_LOG_DIR horkageAnton Lundin1-0/+1
06f6c4c6c3e8 ("ata: libata: add missing ata_identify_page_supported() calls") introduced additional calls to ata_identify_page_supported(), thus also adding indirectly accesses to the device log directory log page through ata_log_supported(). Reading this log page causes SATADOM-ML 3ME devices to lock up. Introduce the horkage flag ATA_HORKAGE_NO_LOG_DIR to prevent accesses to the log directory in ata_log_supported() and add a blacklist entry with this flag for "SATADOM-ML 3ME" devices. Fixes: 636f6e2af4fb ("libata: add horkage for missing Identify Device log") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-04netfilter: conntrack: pptp: use single option structureFlorian Westphal1-21/+17
Instead of exposing the four hooks individually use a sinle hook ops structure. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-04netfilter: conntrack: remove extension register apiFlorian Westphal7-54/+0
These no longer register/unregister a meaningful structure so remove it. Cc: Paul Blakey <paulb@nvidia.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-04netfilter: conntrack: handle ->destroy hook via nat_ops insteadFlorian Westphal2-3/+1
The nat module already exposes a few functions to the conntrack core. Move the nat extension destroy hook to it. After this, no conntrack extension needs a destroy hook. 'struct nf_ct_ext_type' and the register/unregister api can be removed in a followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-04netfilter: conntrack: move extension sizes into coreFlorian Westphal1-1/+0
No need to specify this in the registration modules, we already collect all sizes for build-time checks on the maximum combined size. After this change, all extensions except nat have no meaningful content in their nf_ct_ext_type struct definition. Next patch handles nat, this will then allow to remove the dynamic register api completely. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-04netfilter: conntrack: make all extensions 8-byte alignnedFlorian Westphal1-4/+1
All extensions except one need 8 byte alignment, so just make that the default. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-04netfilter: nfqueue: enable to get skb->priorityNicolas Dichtel1-0/+1
This info could be useful to improve traffic analysis. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-04Merge tag 'drm-misc-fixes-2022-02-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixesDave Airlie1-1/+1
* dma-buf/heaps: Fix potential spectre v1 gadget * drm/kmb: Fix potential out-of-bounds access * drm/mxsfb: Fix NULL-pointer dereference * drm/nouveau: Fix potential out-of-bounds access in BIOS decoding * fbdev: Re-add support for fbcon hardware acceleration Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Yfu8mTZQUNt1RwZd@linux-uq9g
2022-02-04netfilter: ctnetlink: disable helper autoassignFlorian Westphal1-1/+1
When userspace, e.g. conntrackd, inserts an entry with a specified helper, its possible that the helper is lost immediately after its added: ctnetlink_create_conntrack -> nf_ct_helper_ext_add + assign helper -> ctnetlink_setup_nat -> ctnetlink_parse_nat_setup -> parse_nat_setup -> nfnetlink_parse_nat_setup -> nf_nat_setup_info -> nf_conntrack_alter_reply -> __nf_ct_try_assign_helper ... and __nf_ct_try_assign_helper will zero the helper again. Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like when helper is assigned via ruleset. Dropped old 'not strictly necessary' comment, it referred to use of rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER(). NB: Fixes tag intentionally incorrect, this extends the referenced commit, but this change won't build without IPS_HELPER introduced there. Fixes: 6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT") Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-03block: introduce BLK_STS_OFFLINESong Liu1-0/+7
Currently, drivers reports BLK_STS_IOERR for devices that are not full online or being removed. This behavior could cause confusion for users, as they are not really I/O errors from the device. Solve this issue with a new state BLK_STS_OFFLINE, which reports "device offline error" in dmesg instead of "I/O error". EIO is intentionally kept to not change user visible return value. Signed-off-by: Song Liu <song@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220203192827.1370270-2-song@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-03firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()Stephan Gerhold1-2/+2
qcom_scm_set_cold/warm_boot_addr() currently take a cpumask parameter, but it's not very useful because at the end we always set the same entry address for all CPUs. This also allows speeding up probe of cpuidle-qcom-spm a bit because only one SCM call needs to be made to the TrustZone firmware, instead of one per CPU. The main reason for this change is that it allows implementing the "multi-cluster" variant of the set_boot_addr() call more easily without having to rely on functions that break in certain build configurations or that are not exported to modules. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201130505.257379-4-stephan@gerhold.net
2022-02-03soc: qcom: mdt_loader: Extract PAS operationsBjorn Andersson1-0/+11
Rather than passing a boolean to indicate if the PAS operations should be performed from within __mdt_load(), extract them to their own helper function. This will allow clients to invoke this directly, with some qcom_scm_pas_metadata context that they later needs to release, without further having to complicate the prototype of qcom_mdt_load(). Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-9-bjorn.andersson@linaro.org
2022-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski20-51/+151
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-03Merge tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds4-13/+34
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, netfilter, and ieee802154. Current release - regressions: - Partially revert "net/smc: Add netlink net namespace support", fix uABI breakage - netfilter: - nft_ct: fix use after free when attaching zone template - nft_byteorder: track register operations Previous releases - regressions: - ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback - phy: qca8081: fix speeds lower than 2.5Gb/s - sched: fix use-after-free in tc_new_tfilter() Previous releases - always broken: - tcp: fix mem under-charging with zerocopy sendmsg() - tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() - neigh: do not trigger immediate probes on NUD_FAILED from neigh_managed_work, avoid a deadlock - bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN false-positives - netfilter: nft_reject_bridge: fix for missing reply from prerouting - smc: forward wakeup to smc socket waitqueue after fallback - ieee802154: - return meaningful error codes from the netlink helpers - mcr20a: fix lifs/sifs periods - at86rf230, ca8210: stop leaking skbs on error paths - macsec: add missing un-offload call for NETDEV_UNREGISTER of parent - ax25: add refcount in ax25_dev to avoid UAF bugs - eth: mlx5e: - fix SFP module EEPROM query - fix broken SKB allocation in HW-GRO - IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows - eth: amd-xgbe: - fix skb data length underflow - ensure reset of the tx_timer_active flag, avoid Tx timeouts - eth: stmmac: fix runtime pm use in stmmac_dvr_remove() - eth: e1000e: handshake with CSME starts from Alder Lake platforms" * tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) ax25: fix reference count leaks of ax25_dev net: stmmac: ensure PTP time register reads are consistent net: ipa: request IPA register values be retained dt-bindings: net: qcom,ipa: add optional qcom,qmp property tools/resolve_btfids: Do not print any commands when building silently bpf: Use VM_MAP instead of VM_ALLOC for ringbuf net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() net: sparx5: do not refer to skb after passing it on Partially revert "net/smc: Add netlink net namespace support" net/mlx5e: Avoid field-overflowing memcpy() net/mlx5e: Use struct_group() for memcpy() region net/mlx5e: Avoid implicit modify hdr for decap drop rule net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic net/mlx5e: Don't treat small ceil values as unlimited in HTB offload net/mlx5: E-Switch, Fix uninitialized variable modact net/mlx5e: Fix handling of wrong devices during bond netevent net/mlx5e: Fix broken SKB allocation in HW-GRO net/mlx5e: Fix wrong calculation of header index in HW_GRO ...
2022-02-03ice: add support for DSCP QoS for IDCDave Ertman1-0/+4
The ice driver provides QoS information to auxiliary drivers through the exported function ice_get_qos_params. This function doesn't currently support L3 DSCP QoS. Add the necessary defines, structure elements and code to support DSCP QoS through the IIDC functions. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-03ax25: fix reference count leaks of ax25_devDuoming Zhou1-3/+5
The previous commit d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") introduces refcount into ax25_dev, but there are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(), ax25_rt_add(), ax25_rt_del() and ax25_rt_opt(). This patch uses ax25_dev_put() and adjusts the position of ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev. Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-03soc: qcom: mdt_loader: Allow hash segment to be split outBjorn Andersson1-2/+4
It's been observed that some firmware found in a Qualcomm SM8450 device has the hash table in a separate .bNN file. Use the newly extracted helper function to load this segment from the separate file, if it's determined that the hashes are not part of the already loaded firmware. In order to do this, the function needs access to the firmware basename and to provide more useful error messages a struct device to associate the errors with. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-4-bjorn.andersson@linaro.org
2022-02-03firmware: qcom: scm: Introduce pas_metadata contextBjorn Andersson1-1/+9
Starting with Qualcomm SM8450, some new security enhancements has been done in the secure world, which results in the requirement to keep the metadata segment accessible by the secure world from init_image() until auth_and_reset(). Introduce a "PAS metadata context" object that can be passed to init_image() for tracking the mapped memory and a related release function for client drivers to release the mapping once either auth_and_reset() has been invoked or in error handling paths on the way there. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-2-bjorn.andersson@linaro.org
2022-02-03i40e: remove enum i40e_client_stateJakub Kicinski1-10/+0
It's not used. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-03XArray: Include bitmap.h from xarray.hMatthew Wilcox (Oracle)1-0/+1
xas_find_chunk() calls find_next_bit(), which is defined in find.h, included from bitmap.h. Inside the kernel, this isn't a problem because bitmap.h is included from cpumask.h which is dragged in (eventually) by gfp.h. When building the test-suite, that doesn't happen, so we need to include bitmap.h explicitly. Fixes: 4ade0818cf04 ("tools: sync tools/bitmap with mother linux") Reported-by: Liam Howlett <liam.howlett@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-03Revert "module, async: async_synchronize_full() on module init iff async is used"Igor Pylypiv1-1/+0
This reverts commit 774a1221e862b343388347bac9b318767336b20b. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Changyuan Lyu <changyuanl@google.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-02-03thermal: netlink: Add a new event to notify CPU capabilities changeSrinivas Pandruvada1-1/+5
Add a new netlink event to notify change in CPU capabilities in terms of performance and efficiency. Firmware may change CPU capabilities as a result of thermal events in the system or to account for changes in the TDP (thermal design power) level. This notification type will allow user space to avoid running workloads on certain CPUs or proactively adjust power limits to avoid future events. The netlink message consists of a nested attribute (THERMAL_GENL_ATTR_CPU_CAPABILITY) with three attributes: * THERMAL_GENL_ATTR_CPU_CAPABILITY_ID (type u32): -- logical CPU number * THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE (type u32): -- Scaled performance from 0-1023 * THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY (type u32): -- Scaled efficiency from 0-1023 Reviewed-by: Len Brown <len.brown@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-03dt-bindings: Add headers for Tegra234 PWMAkhil R2-0/+24
Add dt-bindings header files for PWM of Tegra234 Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-02-03dt-bindings: Add headers for Tegra234 I2CAkhil R2-1/+26
Add dt-bindings header files for I2C controllers for Tegra234 Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-02-03jbd2: refactor wait logic for transaction updates into a common functionRitesh Harjani1-1/+3
No functionality change as such in this patch. This only refactors the common piece of code which waits for t_updates to finish into a common function named as jbd2_journal_wait_updates(journal_t *) Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/8c564f70f4b2591171677a2a74fccb22a7b6c3a4.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-02-03jbd2: cleanup unused functions declarations from jbd2.hRitesh Harjani1-7/+0
During code review found no references of few of these below function declarations. This patch cleans those up from jbd2.h Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/30d1fc327becda197a4136cf9cdc73d9baa3b7b9.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-02-03ext4: fast commit may not fallback for ineligible commitXin Yin1-1/+1
For the follow scenario: 1. jbd start commit transaction n 2. task A get new handle for transaction n+1 3. task A do some ineligible actions and mark FC_INELIGIBLE 4. jbd complete transaction n and clean FC_INELIGIBLE 5. task A call fsync In this case fast commit will not fallback to full commit and transaction n+1 also not handled by jbd. Make ext4_fc_mark_ineligible() also record transaction tid for latest ineligible case, when call ext4_fc_cleanup() check current transaction tid, if small than latest ineligible tid do not clear the EXT4_MF_FC_INELIGIBLE. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Ritesh Harjani <riteshh@linux.ibm.com> Suggested-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Signed-off-by: Xin Yin <yinxin.x@bytedance.com> Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-02-03drm/connector: Fix typo in documentationMaxime Ripard1-2/+2
Commit 4adc33f36d80 ("drm/edid: Split deep color modes between RGB and YUV444") introduced two new variables in struct drm_display_info and their documentation, but the documentation part had a typo resulting in a doc build warning. Fixes: 4adc33f36d80 ("drm/edid: Split deep color modes between RGB and YUV444") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20220202094340.875190-1-maxime@cerno.tech
2022-02-03net: dsa: mv88e6xxx: Improve multichip isolation of standalone portsTobias Waldekranz1-0/+6
Given that standalone ports are now configured to bypass the ATU and forward all frames towards the upstream port, extend the ATU bypass to multichip systems. Load VID 0 (standalone) into the VTU with the policy bit set. Since VID 4095 (bridged) is already loaded, we now know that all VIDs in use are always available in all VTUs. Therefore, we can safely enable 802.1Q on DSA ports. Setting the DSA ports' VTU policy to TRAP means that all incoming frames on VID 0 will be classified as MGMT - as a result, the ATU is bypassed on all subsequent switches. With this isolation in place, we are able to support configurations that are simultaneously very quirky and very useful. Quirky because it involves looping cables between local switchports like in this example: CPU | .------. .---0---. | .----0----. | sw0 | | | sw1 | '-1-2-3-' | '-1-2-3-4-' $ @ '---' $ @ % % We have three physically looped pairs ($, @, and %). This is very useful because it allows us to run the kernel's kselftests for the bridge on mv88e6xxx hardware. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03net: dsa: mv88e6xxx: Improve isolation of standalone portsTobias Waldekranz1-0/+12
Clear MapDA on standalone ports to bypass any ATU lookup that might point the packet in the wrong direction. This means that all packets are flooded using the PVT config. So make sure that standalone ports are only allowed to communicate with the local upstream port. Here is a scenario in which this is needed: CPU | .----. .---0---. | .--0--. | sw0 | | | sw1 | '-1-2-3-' | '-1-2-' '---' - sw0p1 and sw1p1 are bridged - sw0p2 and sw1p2 are in standalone mode - Learning must be enabled on sw0p3 in order for hardware forwarding to work properly between bridged ports 1. A packet with SA :aa comes in on sw1p2 1a. Egresses sw1p0 1b. Ingresses sw0p3, ATU adds an entry for :aa towards port 3 1c. Egresses sw0p0 2. A packet with DA :aa comes in on sw0p2 2a. If an ATU lookup is done at this point, the packet will be incorrectly forwarded towards sw0p3. With this change in place, the ATU is bypassed and the packet is forwarded in accordance with the PVT, which only contains the CPU port. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03page_pool: Refactor page_pool to enable fragmenting after allocationAlexander Duyck1-30/+52
This change is meant to permit a driver to perform "fragmenting" of the page from within the driver instead of the current model which requires pre-partitioning the page. The main motivation behind this is to support use cases where the page will be split up by the driver after DMA instead of before. With this change it becomes possible to start using page pool to replace some of the existing use cases where multiple references were being used for a single page, but the number needed was unknown as the size could be dynamic. For example, with this code it would be possible to do something like the following to handle allocation: page = page_pool_alloc_pages(); if (!page) return NULL; page_pool_fragment_page(page, DRIVER_PAGECNT_BIAS_MAX); rx_buf->page = page; rx_buf->pagecnt_bias = DRIVER_PAGECNT_BIAS_MAX; Then we would process a received buffer by handling it with: rx_buf->pagecnt_bias--; Once the page has been fully consumed we could then flush the remaining instances with: if (page_pool_defrag_page(page, rx_buf->pagecnt_bias)) continue; page_pool_put_defragged_page(pool, page -1, !!budget); The general idea is that we want to have the ability to allocate a page with excess fragment count and then trim off the unneeded fragments. Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.