| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With CONFIG_VMAP_STACK=y the kernel stack of all tasks should be
allocated in the vmalloc space. The initial stack used for all
the early init code is in the init_thread_union. To be able to
switch from this early stack to a properly allocated stack
from vmalloc the architecture needs a switch-over point.
Introduce the arch_call_rest_init() function with a weak definition
in init/main.c with the only purpose to call rest_init() from the
end of start_kernel(). The architecture override can then do the
necessary magic to switch to the new vmalloc'ed stack.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Takashi writes:
"sound fixes for 4.19-rc5
here comes a collection of various fixes, mostly for stable-tree
or regression fixes.
Two relatively high LOCs are about the (rather simple) conversion of
uapi integer types in topology API, and a regression fix about HDMI
hotplug notification on AMD HD-audio. The rest are all small
individual fixes like ASoC Intel Skylake race condition, minor
uninitialized page leak in emu10k1 ioctl, Firewire audio error paths,
and so on."
* tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: fireworks: fix memory leak of response buffer at error path
ALSA: oxfw: fix memory leak of discovered stream formats at error path
ALSA: oxfw: fix memory leak for model-dependent data at error path
ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path
ALSA: hda - Enable runtime PM only for discrete GPU
ALSA: oxfw: fix memory leak of private data
ALSA: firewire-tascam: fix memory leak of private data
ALSA: firewire-digi00x: fix memory leak of private data
sound: don't call skl_init_chip() to reset intel skl soc
sound: enable interrupt after dma buffer initialization
Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation"
ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO
ASoC: cs4265: fix MMTLR Data switch control
ASoC: AMD: Ensure reset bit is cleared before configuring
ALSA: fireface: fix memory leak in ff400_switch_fetching_mode()
ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping
ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER
ASoC: rsnd: adg: care clock-frequency size
ASoC: uniphier: change status to orphan
ASoC: rsnd: fixup not to call clk_get/set under non-atomic
...
|
|
Dave writes:
"Various fixes, all over the place:
1) OOB data generation fix in bluetooth, from Matias Karhumaa.
2) BPF BTF boundary calculation fix, from Martin KaFai Lau.
3) Don't bug on excessive frags, to be compatible in situations mixing
older and newer kernels on each end. From Juergen Gross.
4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger.
5) Zero keying information in TLS layer before freeing copies
of them, from Sabrina Dubroca.
6) Fix NULL deref in act_sample, from Davide Caratti.
7) Orphan SKB before GRO in veth to prevent crashes with XDP,
from Toshiaki Makita.
8) Fix use after free in ip6_xmit, from Eric Dumazet.
9) Fix VF mac address regression in bnxt_en, from Micahel Chan.
10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann.
11) Programming adjustments to r8169 which fix not being to enter deep
sleep states on some machines, from Kai-Heng Feng and Hans de
Goede.
12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter
Oskolkov."
* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits)
net/ipv6: do not copy dst flags on rt init
qmi_wwan: set DTR for modems in forced USB2 mode
clk: x86: Stop marking clocks as CLK_IS_CRITICAL
r8169: Get and enable optional ether_clk clock
clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail
r8169: enable ASPM on RTL8106E
r8169: Align ASPM/CLKREQ setting function with vendor driver
Revert "kcm: remove any offset before parsing messages"
kcm: remove any offset before parsing messages
net: ethernet: Fix a unused function warning.
net: dsa: mv88e6xxx: Fix ATU Miss Violation
tls: fix currently broken MSG_PEEK behavior
hv_netvsc: pair VF based on serial number
PCI: hv: support reporting serial number as slot information
bnxt_en: Fix VF mac address regression.
ipv6: fix possible use-after-free in ip6_xmit()
net: hp100: fix always-true check for link up state
ARM: dts: at91: add new compatibility string for macb on sama5d3
net: macb: disable scatter-gather for macb on sama5d3
net: mvpp2: let phylink manage the carrier state
...
|
|
ASoC: Fixes for v4.19
This is the usual set of small fixes scatterd around various drivers,
plus one fix for DAPM and a UAPI build fix. There's not a huge amount
that stands out here relative to anything else.
|
|
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also breakpoint and x86 PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
perf tools: Fix maps__find_symbol_by_name()
tools headers uapi: Update tools's copy of linux/if_link.h
tools headers uapi: Update tools's copy of linux/vhost.h
tools headers uapi: Update tools's copies of kvm headers
tools headers uapi: Update tools's copy of drm/drm.h
tools headers uapi: Update tools's copy of asm-generic/unistd.h
tools headers uapi: Update tools's copy of linux/perf_event.h
perf/core: Force USER_DS when recording user stack data
perf/UAPI: Clearly mark __PERF_SAMPLE_CALLCHAIN_EARLY as internal use
perf/x86/intel: Add support/quirk for the MISPREDICT bit on Knights Landing CPUs
perf annotate: Fix parsing aarch64 branch instructions after objdump update
perf probe powerpc: Ignore SyS symbols irrespective of endianness
perf event-parse: Use fixed size string for comms
perf util: Fix bad memory access in trace info.
perf tools: Streamline bpf examples and headers installation
perf evsel: Fix potential null pointer dereference in perf_evsel__new_idx()
perf arm64: Fix include path for asm-generic/unistd.h
perf/hw_breakpoint: Simplify breakpoint enable in perf_event_modify_breakpoint
perf/hw_breakpoint: Enable breakpoint in modify_user_hw_breakpoint
perf/hw_breakpoint: Remove superfluous bp->attr.disabled = 0
...
|
|
Pull xen fixes from Juergen Gross:
"This contains some minor cleanups and fixes:
- a new knob for controlling scrubbing of pages returned by the Xen
balloon driver to the Xen hypervisor to address a boot performance
issue seen in large guests booted pre-ballooned
- a fix of a regression in the gntdev driver which made it impossible
to use fully virtualized guests (HVM guests) with a 4.19 based dom0
- a fix in Xen cpu hotplug functionality which could be triggered by
wrong admin commands (setting number of active vcpus to 0)
One further note: the patches have all been under test for several
days in another branch. This branch has been rebased in order to avoid
merge conflicts"
* tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/gntdev: fix up blockable calls to mn_invl_range_start
xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage
xen: avoid crash in disable_hotplug_cpu
xen/balloon: add runtime control for scrubbing ballooned out pages
xen/manage: don't complain about an empty value in control/sysrq node
|
|
Pull arm64 fixes from Will Deacon:
"The trickle of arm64 fixes continues to come in.
Nothing that's the end of the world, but we've got a fix for PCI IO
port accesses, an accidental naked "asm goto" and a fix to the
vmcoreinfo PT_NOTE merged this time around which we'd like to get
sorted before it becomes ABI.
- Fix ioport_map() mapping the wrong physical address for some I/O
BARs
- Remove direct use of "asm goto", since some compilers don't like
that
- Ensure kimage_voffset is always present in vmcoreinfo PT_NOTE"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
asm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO
arm64: kernel: arch_crash_save_vmcoreinfo() should depend on CONFIG_CRASH_CORE
arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"
|
|
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for -rc4.
The usual suspects of gadget, xhci, and dwc2/3 are in here, along with
some reverts of reported problem changes, and a number of build
documentation warning fixes. Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
Revert "cdc-acm: implement put_char() and flush_chars()"
usb: Change usb_of_get_companion_dev() place to usb/common
usb: xhci: fix interrupt transfer error happened on MTK platforms
usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
usb: misc: uss720: Fix two sleep-in-atomic-context bugs
usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()
usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id
usb/typec: fix kernel-doc notation warning for typec_match_altmode
usb: Don't die twice if PCI xhci host is not responding in resume
usb: mtu3: fix error of xhci port id when enable U3 dual role
usb: uas: add support for more quirk flags
USB: Add quirk to support DJI CineSSD
usb: typec: fix kernel-doc parameter warning
usb/dwc3/gadget: fix kernel-doc parameter warning
USB: yurex: Check for truncation in yurex_read()
USB: yurex: Fix buffer over-read in yurex_write()
usb: host: xhci-plat: Iterate over parent nodes for finding quirks
xhci: Fix use after free for URB cancellation on a reallocated endpoint
USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller
...
|
|
Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.
Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).
Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also
enabled by default), controlling default value for the new runtime
switch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
The !CONFIG_GENERIC_IOMAP version of ioport_map uses MMIO_UPPER_LIMIT to
prevent users from making I/O accesses outside the expected I/O range -
however it erroneously treats MMIO_UPPER_LIMIT as a mask which is
contradictory to its other users.
The introduction of CONFIG_INDIRECT_PIO, which subtracts an arbitrary
amount from IO_SPACE_LIMIT to form MMIO_UPPER_LIMIT, results in ioport_map
mangling the given port rather than capping it.
We address this by aligning more closely with the CONFIG_GENERIC_IOMAP
implementation of ioport_map by using the comparison operator and
returning NULL where the port exceeds MMIO_UPPER_LIMIT. Though note that
we preserve the existing behavior of masking with IO_SPACE_LIMIT such that
we don't break existing buggy drivers that somehow rely on this masking.
Fixes: 5745392e0c2b ("PCI: Apply the new generic I/O management on PCI IO hosts")
Reported-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Pull overlayfs fixes from Miklos Szeredi:
"This fixes a regression in the recent file stacking update, reported
and fixed by Amir Goldstein. The fix is fairly trivial, but involves
adding a fadvise() f_op and the associated churn in the vfs. As
discussed on -fsdevel, there are other possible uses for this method,
than allowing proper stacking for overlays.
And there's one other fix for a syzkaller detected oops"
* tag 'ovl-fixes-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix oopses in ovl_fill_super() failure paths
ovl: add ovl_fadvise()
vfs: implement readahead(2) using POSIX_FADV_WILLNEED
vfs: add the fadvise() file operation
Documentation/filesystems: update documentation of file_operations
ovl: fix GPF in swapfile_activate of file from overlayfs over xfs
ovl: respect FIEMAP_FLAG_SYNC flag
|
|
Pull block fixes from Jens Axboe:
"Three fixes that should go into this series. This contains:
- Increase number of policies supported by blk-cgroup.
With blk-iolatency, we now have four in kernel, but we had a hard
limit of three...
- Fix regression in null_blk, where the zoned supported broke
queue_mode=0 (bio based).
- NVMe pull request, with a single fix for an issue in the rdma code"
* tag 'for-linus-20180913' of git://git.kernel.dk/linux-block:
null_blk: fix zoned support for non-rq based operation
blk-cgroup: increase number of supported policies
nvmet-rdma: fix possible bogus dereference under heavy load
|
|
Jann Horn points out that the vmacache_flush_all() function is not only
potentially expensive, it's buggy too. It also happens to be entirely
unnecessary, because the sequence number overflow case can be avoided by
simply making the sequence number be 64-bit. That doesn't even grow the
data structures in question, because the other adjacent fields are
already 64-bit.
So simplify the whole thing by just making the sequence number overflow
case go away entirely, which gets rid of all the complications and makes
the code faster too. Win-win.
[ Oleg Nesterov points out that the VMACACHE_FULL_FLUSHES statistics
also just goes away entirely with this ]
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This contains key material in crypto_send_aes_gcm_128 and
crypto_recv_aes_gcm_128.
Introduce union tls_crypto_context, and replace the two identical
unions directly embedded in struct tls_context with it. We can then
use this union to clean up the memory in the new tls_ctx_free()
function.
Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The recent change of vga_switcheroo allowed the runtime PM for
HD-audio on AMD GPUs, but this also resulted in a regression. When
the HD-audio controller driver gets runtime-suspended, HD-audio link
is turned off, and the hotplug notification is ignored. This leads to
the inconsistent audio state (the connection isn't notified and ELD is
ignored).
The best fix would be to implement the proper ELD notification via the
audio component, but it's still not ready. As a quick workaround,
this patch adds the check of runtime_idle and allows the runtime
suspend only when the vga_switcheroo is bound with discrete GPU.
That is, a system with a single GPU and APU would be again without
runtime PM to keep the HD-audio link for the hotplug notification and
ELD read out.
Also, the codec->auto_runtime_pm flag is set only for the discrete GPU
at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is
forcibly runtime-PM enabled), so that APU can still get the ELD
notification.
For identifying which GPU is bound, a new vga_switcheroo client
callback, gpu_bound, is implemented. The vga_switcheroo simply calls
this when GPU is bound, and tells whether it's dGPU or APU.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945
Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller")
Reported-by: Jian-Hong Pan <jian-hong@endlessm.com>
Tested-by: Jian-Hong Pan <jian-hong@endlessm.com>
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull PCI fixes from Bjorn Helgaas:
- Add Tyrel Datwyler as maintainer for PPC64 RPA hotplug (Tyrel
Datwyler)
- Add Gustavo Pimentel as DesignWare PCI maintainer (Joao Pinto)
- Fix a Switchtec Spectre v1 vulnerability (Gustavo A. R. Silva)
- Revert an unnecessary Intel 300 ACS quirk (Mika Westerberg)
- Fix pciehp hot-add/powerfault detection that left indicators in wrong
state (Keith Busch)
- Fix pci_reset_bus() logic error (Dennis Dalessandro)
- Revert IB/hfi1 PCI reset change that caused a deadlock (Dennis
Dalessandro)
- Allow enabling PASID on Root Complex Integrated Endpoints (Felix
Kuehling)
* tag 'pci-v4.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Fix enabling of PASID on RC integrated endpoints
IB/hfi1,PCI: Allow bus reset while probing
PCI: Fix faulty logic in pci_reset_bus()
PCI: pciehp: Fix hot-add vs powerfault detection order
switchtec: Fix Spectre v1 vulnerability
Revert "PCI: Add ACS quirk for Intel 300 series"
MAINTAINERS: Add Gustavo Pimentel as DesignWare PCI maintainer
MAINTAINERS: Add entries for PPC64 RPA PCI hotplug drivers
|
|
Pull networking fixes from David Miller:
1) Fix up several Kconfig dependencies in netfilter, from Martin Willi
and Florian Westphal.
2) Memory leak in be2net driver, from Petr Oros.
3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem.
4) mlx5_attach_interface needs to check for errors, from Huy Nguyen.
5) tipc_release() needs to orphan the sock, from Cong Wang.
6) Need to program TxConfig register after TX/RX is enabled in r8169
driver, not beforehand, from Maciej S. Szmigiero.
7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal.
8) Fix crash regression in ip_do_fragment(), from Taehee Yoo.
9) syzbot can create conditions where kernel log is flooded with
synflood warnings due to creation of many listening sockets, fix
that. From Willem de Bruijn.
10) Fix RCU issues in rds socket layer, from Cong Wang.
11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
nfp: flower: reject tunnel encap with ipv6 outer headers for offloading
nfp: flower: fix vlan match by checking both vlan id and vlan pcp
tipc: check return value of __tipc_dump_start()
s390/qeth: don't dump past end of unknown HW header
s390/qeth: use vzalloc for QUERY OAT buffer
s390/qeth: switch on SG by default for IQD devices
s390/qeth: indicate error when netdev allocation fails
rds: fix two RCU related problems
r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
erspan: fix error handling for erspan tunnel
erspan: return PACKET_REJECT when the appropriate tunnel is not found
tcp: rate limit synflood warnings further
MIPS: lantiq: dma: add dev pointer
netfilter: xt_hashlimit: use s->file instead of s->private
netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
netfilter: conntrack: reset tcp maxwin on re-register
qmi_wwan: Support dynamic config on Quectel EP06
ethernet: renesas: convert to SPDX identifiers
...
|
|
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which
1) sets bus->chip_init to prevent multiple entrances before device
is stopped; 2) enables interrupt.
We shouldn't use it for the purpose of resetting device only because
1) when we really want to initialize device, we won't be able to do
so; 2) we are ready to handle interrupt yet, and kernel crashes when
interrupt comes in.
Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset
device properly.
Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for you net tree:
1) Remove duplicated include at the end of UDP conntrack, from Yue Haibing.
2) Restore conntrack dependency on xt_cluster, from Martin Willi.
3) Fix splat with GSO skbs from the checksum target, from Florian Westphal.
4) Rework ct timeout support, the template strategy to attach custom timeouts
is not correct since it will not work in conjunction with conntrack zones
and we have a possible free after use when removing the rule due to missing
refcounting. To fix these problems, do not use conntrack template at all
and set custom timeout on the already valid conntrack object. This
fix comes with a preparation patch to simplify timeout adjustment by
initializating the first position of the timeout array for all of the
existing trackers. Patchset from Florian Westphal.
5) Fix missing dependency on from IPv4 chain NAT type, from Florian.
6) Release chain reference counter from the flush path, from Taehee Yoo.
7) After flushing an iptables ruleset, conntrack hooks are unregistered
and entries are left stale to be cleaned up by the timeout garbage
collector. No TCP tracking is done on established flows by this time.
If ruleset is reloaded, then hooks are registered again and TCP
tracking is restored, which considers packets to be invalid. Clear
window tracking to exercise TCP flow pickup from the middle given that
history is lost for us. Again from Florian.
8) Fix crash from netlink interface with CONFIG_NF_CONNTRACK_TIMEOUT=y
and CONFIG_NF_CT_NETLINK_TIMEOUT=n.
9) Broken CT target due to returning incorrect type from
ctnl_timeout_find_get().
10) Solve conntrack clash on NF_REPEAT verdicts too, from Michal Vaner.
11) Missing conversion of hashlimit sysctl interface to new API, from
Cong Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Calling into the new API to reset the secondary bus results in a deadlock.
This occurs because the device/bus is already locked at probe time.
Reverting back to the old behavior while the API is improved.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200985
Fixes: c6a44ba950d1 ("PCI: Rename pci_try_reset_bus() to pci_reset_bus()")
Fixes: 409888e0966e ("IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Sinan Kaya <okaya@codeaurora.org>
|
|
Pull HID fixes from Jiri Kosina:
- functional regression fix for sensor-hub driver from Hans de Goede
- stop doing device reset for i2c-hid devices, which unbreaks some of
them (and is in line with the specification), from Kai-Heng Feng
- error handling fix for hid-core from Gustavo A. R. Silva
- functional regression fix for some Elan panels from Benjamin
Tissoires
- a few new device ID additions and misc small fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: i2c-hid: Don't reset device upon system resume
HID: sensor-hub: Restore fixup for Lenovo ThinkPad Helix 2 sensor hub report
HID: core: fix NULL pointer dereference
HID: core: fix grouping by application
HID: multitouch: fix Elan panels with 2 input modes declaration
HID: hid-saitek: Add device ID for RAT 7 Contagion
HID: core: fix memory leak on probe
HID: input: fix leaking custom input node name
HID: add support for Apple Magic Keyboards
HID: i2c-hid: Fix flooded incomplete report after S3 on Rayd touchscreen
HID: intel-ish-hid: Enable Sunrise Point-H ish driver
|
|
After merging the iolatency policy, we potentially now have 4 policies
being registered, but only support 3. This causes one of them to fail
loading. Takashi reports that BFQ no longer works for him, because it
fails to load due to policy registration failure.
Bump to 5 policies, and also add a warning for when we have exceeded
the global amount. If we have to touch this again, we should switch
to a dynamic scheme instead.
Reported-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Vince noted that commit:
6cbc304f2f36 ("perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)")
'leaked' __PERF_SAMPLE_CALLCHAIN_EARLY into the UAPI namespace. And
while sys_perf_event_open() will error out if you try to use it, it is
exposed.
Clearly mark it for internal use only to avoid any confusion.
Requested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull timekeeping fixes from Thomas Gleixner:
"Two fixes for timekeeping:
- Revert to the previous kthread based update, which is unfortunately
required due to lock ordering issues. The removal caused boot
failures on old Core2 machines. Add a proper comment why the thread
needs to stay to prevent accidental removal in the future.
- Fix a silly typo in a function declaration"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Revert "Remove kthread"
timekeeping: Fix declaration of read_persistent_wall_and_boot_offset()
|
|
Pull block fixes from Jens Axboe:
"Small collection of fixes that should go into this release. This
contains:
- Small series that fixes a race between blkcg teardown and writeback
(Dennis Zhou)
- Fix disallowing invalid block size settings from the nbd ioctl (me)
- BFQ fix for a use-after-free on last release of a bfqg (Konstantin
Khlebnikov)
- Fix for the "don't warn for flush" fix (Mikulas)"
* tag 'for-linus-20180906' of git://git.kernel.dk/linux-block:
block: bfq: swap puts in bfqg_and_blkg_put
block: don't warn when doing fsync on read-only devices
nbd: don't allow invalid blocksize settings
blkcg: use tryget logic when associating a blkg with a bio
blkcg: delay blkg destruction until after writeback has finished
Revert "blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()"
|
|
Pull tracing fixes from Steven Rostedt:
"This fixes two annoying bugs:
- The first one is a side effect caused by using SRCU for rcuidle
tracepoints. It seems that the perf was depending on the rcuidle
tracepoints to make RCU watch when it wasn't.
The real fix will be to have perf use SRCU instead of depending on
RCU watching, but that can't be done until SRCU is safe to use in
NMI context (Paul's working on that).
- The second bug fix is for a bug that's been periodically making my
tests fail randomly for some time. I haven't had time to track it
down, but finally have. It has to do with stressing NMIs (via perf)
while enabling or disabling ftrace function handling with lockdep
enabled.
If an interrupt happens and just as it returns, it sets lockdep
back to "interrupts enabled" but before it returns an NMI is
triggered, and if this happens while printk_nmi_enter has a
breakpoint attached to it (because ftrace is converting it to or
from nop to call fentry), the breakpoint trap also calls into
lockdep, and since returning from the NMI to a interrupt handler,
interrupts were disabled when the NMI went off, lockdep keeps its
state as interrupts disabled when it returns back from the
interrupt handler where interrupts are enabled.
This causes lockdep_assert_irqs_enabled() to trigger a false
positive"
* tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
printk/tracing: Do not trace printk_nmi_enter()
tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints
|
|
Minimal stride size is 16.
Hence, the number of strides in a fragment (of PAGE_SIZE)
is <= PAGE_SIZE / 16 <= 4K.
u16 is sufficient to represent this.
Fixes: d7037ad73daa ("net/mlx5: Fix QP fragmented buffer allocation")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Minimal stride size is 16.
Hence, the number of strides in a fragment (of PAGE_SIZE)
is <= PAGE_SIZE / 16 <= 4K.
u16 is sufficient to represent this.
Fixes: 388ca8be0037 ("IB/mlx5: Implement fragmented completion queue (CQ)")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When the mlx5 health mechanism detects a problem while the driver
is in the middle of init_one or remove_one, the driver needs to prevent
the health mechanism from scheduling future work; if future work
is scheduled, there is a problem with use-after-free: the system WQ
tries to run the work item (which has been freed) at the scheduled
future time.
Prevent this by disabling work item scheduling in the health mechanism
when the driver is in the middle of init_one() or remove_one().
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Borislav reported the following splat:
=============================
WARNING: suspicious RCU usage
4.19.0-rc1+ #1 Not tainted
-----------------------------
./include/linux/rcupdate.h:631 rcu_read_lock() used illegally while idle!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 2, debug_locks = 1
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
#0: 000000004557ee0e (rcu_read_lock){....}, at: perf_event_output_forward+0x0/0x130
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc1+ #1
Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET86WW (2.06 ) 11/13/2012
Call Trace:
dump_stack+0x85/0xcb
perf_event_output_forward+0xf6/0x130
__perf_event_overflow+0x52/0xe0
perf_swevent_overflow+0x91/0xb0
perf_tp_event+0x11a/0x350
? find_held_lock+0x2d/0x90
? __lock_acquire+0x2ce/0x1350
? __lock_acquire+0x2ce/0x1350
? retint_kernel+0x2d/0x2d
? find_held_lock+0x2d/0x90
? tick_nohz_get_sleep_length+0x83/0xb0
? perf_trace_cpu+0xbb/0xd0
? perf_trace_buf_alloc+0x5a/0xa0
perf_trace_cpu+0xbb/0xd0
cpuidle_enter_state+0x185/0x340
do_idle+0x1eb/0x260
cpu_startup_entry+0x5f/0x70
start_kernel+0x49b/0x4a6
secondary_startup_64+0xa4/0xb0
This is due to the tracepoints moving to SRCU usage which does not require
RCU to be "watching". But perf uses these tracepoints with RCU and expects
it to be. Hence, we still need to add in the rcu_irq_enter/exit_irqson()
calls for "rcuidle" tracepoints. This is a temporary fix until we have SRCU
working in NMI context, and then perf can be converted to use that instead
of normal RCU.
Link: http://lkml.kernel.org/r/20180904162611.6a120068@gandalf.local.home
Cc: x86-ml <x86@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Fixes: e6753f23d961d ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Fix kernel-doc warning for missing struct member description:
../include/linux/mod_devicetable.h:763: warning: Function parameter or member 'driver_data' not described in 'typec_device_id'
Fixes: 8a37d87d72f0c ("usb: typec: Bus type for alternate modes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
nilfs2: convert to SPDX license tags
drivers/dax/device.c: convert variable to vm_fault_t type
lib/Kconfig.debug: fix three typos in help text
checkpatch: add __ro_after_init to known $Attribute
mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal
uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name
memory_hotplug: fix kernel_panic on offline page processing
checkpatch: add optional static const to blank line declarations test
ipc/shm: properly return EIDRM in shm_lock()
mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.
mm/util.c: improve kvfree() kerneldoc
tools/vm/page-types.c: fix "defined but not used" warning
tools/vm/slabinfo.c: fix sign-compare warning
kmemleak: always register debugfs file
mm: respect arch_dup_mmap() return value
mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm().
mm: memcontrol: print proper OOM header when no eligible victim left
|
|
Since this header is in "include/uapi/linux/", apparently people want to
use it in userspace programs -- even in C++ ones. However, the header
uses a C++ reserved keyword ("private"), so change that to "dh_private"
instead to allow the header file to be used in C++ userspace.
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051
Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org
Fixes: ddbb41148724 ("KEYS: Add KEYCTL_DH_COMPUTE command")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) Must perform TXQ teardown before unregistering interfaces in
mac80211, from Toke Høiland-Jørgensen.
2) Don't allow creating mac80211_hwsim with less than one channel, from
Johannes Berg.
3) Division by zero in cfg80211, fix from Johannes Berg.
4) Fix endian issue in tipc, from Haiqing Bai.
5) BPF sockmap use-after-free fixes from Daniel Borkmann.
6) Spectre-v1 in mac80211_hwsim, from Jinbum Park.
7) Missing rhashtable_walk_exit() in tipc, from Cong Wang.
8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when
kvzalloc() tries to use kmalloc() pages. From Eric Dumazet.
9) Fix deadlock in hv_netvsc, from Dexuan Cui.
10) Do not restart timewait timer on RST, from Florian Westphal.
11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev.
12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu.
13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai.
14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu.
15) Use-after-free in act_ife, fix from Cong Wang.
16) Missing hold to meta module in act_ife, from Vlad Buslov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
net: phy: sfp: Handle unimplemented hwmon limits and alarms
net: sched: action_ife: take reference to meta module
act_ife: fix a potential use-after-free
net/mlx5: Fix SQ offset in QPs with small RQ
tipc: correct spelling errors for tipc_topsrv_queue_evt() comments
tipc: correct spelling errors for struct tipc_bc_base's comment
bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.
bnxt_en: Clean up unused functions.
bnxt_en: Fix firmware signaled resource change logic in open.
sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel
sctp: fix invalid reference to the index variable of the iterator
net/ibm/emac: wrong emac_calc_base call was used by typo
net: sched: null actions array pointer before releasing action
vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition
r8169: add support for NCube 8168 network card
ip6_tunnel: respect ttl inherit for ip6tnl
mac80211: shorten the IBSS debug messages
mac80211: don't Tx a deauth frame if the AP forbade Tx
mac80211: Fix station bandwidth setting after channel switch
mac80211: fix a race between restart and CSA flows
...
|
|
commit f07b3c1da92d ("HID: generic: create one input report per
application type") was effectively the same as MULTI_INPUT:
hidinput->report was never set, so hidinput_match_application()
always returned null.
Fix that by testing against the real application.
Note that this breaks some old eGalax touchscreens that expect MULTI_INPUT
instead of HID_QUIRK_INPUT_PER_APP. Enable this quirk for backward
compatibility on all non-Win8 touchscreens.
link: https://bugzilla.kernel.org/show_bug.cgi?id=200847
link: https://bugzilla.kernel.org/show_bug.cgi?id=200849
link: https://bugs.archlinux.org/task/59699
link: https://github.com/NixOS/nixpkgs/issues/45165
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Johannes Berg says:
====================
Here are quite a large number of fixes, notably:
* various A-MSDU building fixes (currently only affects mt76)
* syzkaller & spectre fixes in hwsim
* TXQ vs. teardown fix that was causing crashes
* embed WMM info in reg rule, bad code here had been causing crashes
* one compilation issue with fix from Arnd (rfkill-gpio includes)
* fixes for a race and bad data during/after channel switch
* nl80211: a validation fix, attribute type & unit fixes
along with other small fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The _IOC_READ flag fits this ioctl request more because this request
actually only writes to, but doesn't read from userspace.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.
Fixes: 429711aec282 ("vhost: switch to use new message format")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This card identifies itself as:
Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06)
Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468]
Adding a new entry to rtl8169_pci_tbl makes the card work.
Link: http://launchpad.net/bugs/1788730
Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is read_persistent_wall_and_boot_offset() and not
read_persistent_clock_and_boot_offset()
Fixes: 3eca993740b8eb40f51 ("timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset()")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Link: https://lkml.kernel.org/r/20180903081533.34366-1-borntraeger@de.ibm.com
|
|
Include linux/in6.h for struct in6_addr.
/usr/include/linux/rds.h:156:18: error: field ‘laddr’ has incomplete type
struct in6_addr laddr;
^~~~~
/usr/include/linux/rds.h:157:18: error: field ‘faddr’ has incomplete type
struct in6_addr faddr;
^~~~~
/usr/include/linux/rds.h:178:18: error: field ‘laddr’ has incomplete type
struct in6_addr laddr;
^~~~~
/usr/include/linux/rds.h:179:18: error: field ‘faddr’ has incomplete type
struct in6_addr faddr;
^~~~~
/usr/include/linux/rds.h:198:18: error: field ‘bound_addr’ has incomplete type
struct in6_addr bound_addr;
^~~~~~~~~~
/usr/include/linux/rds.h:199:18: error: field ‘connected_addr’ has incomplete type
struct in6_addr connected_addr;
^~~~~~~~~~~~~~
/usr/include/linux/rds.h:219:18: error: field ‘local_addr’ has incomplete type
struct in6_addr local_addr;
^~~~~~~~~~
/usr/include/linux/rds.h:221:18: error: field ‘peer_addr’ has incomplete type
struct in6_addr peer_addr;
^~~~~~~~~
/usr/include/linux/rds.h:245:18: error: field ‘src_addr’ has incomplete type
struct in6_addr src_addr;
^~~~~~~~
/usr/include/linux/rds.h:246:18: error: field ‘dst_addr’ has incomplete type
struct in6_addr dst_addr;
^~~~~~~~
Fixes: b7ff8b1036f0 ("rds: Extend RDS API for IPv6 support")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull devicetree updates from Rob Herring:
"A couple of new helper functions in preparation for some tree wide
clean-ups.
I'm sending these new helpers now for rc2 in order to simplify the
dependencies on subsequent cleanups across the tree in 4.20"
* tag 'devicetree-fixes-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add device_type access helper functions
of: add node name compare helper functions
of: add helper to lookup compatible child node
|
|
Currently, blkcg destruction relies on a sequence of events:
1. Destruction starts. blkcg_css_offline() is called and blkgs
release their reference to the blkcg. This immediately destroys
the cgwbs (writeback).
2. With blkgs giving up their reference, the blkcg ref count should
become zero and eventually call blkcg_css_free() which finally
frees the blkcg.
Jiufei Xue reported that there is a race between blkcg_bio_issue_check()
and cgroup_rmdir(). To remedy this, blkg destruction becomes contingent
on the completion of all writeback associated with the blkcg. A count of
the number of cgwbs is maintained and once that goes to zero, blkg
destruction can follow. This should prevent premature blkg destruction
related to writeback.
The new process for blkcg cleanup is as follows:
1. Destruction starts. blkcg_css_offline() is called which offlines
writeback. Blkg destruction is delayed on the cgwb_refcnt count to
avoid punting potentially large amounts of outstanding writeback
to root while maintaining any ongoing policies. Here, the base
cgwb_refcnt is put back.
2. When the cgwb_refcnt becomes zero, blkcg_destroy_blkgs() is called
and handles destruction of blkgs. This is where the css reference
held by each blkg is released.
3. Once the blkcg ref count goes to zero, blkcg_css_free() is called.
This finally frees the blkg.
It seems in the past blk-throttle didn't do the most understandable
things with taking data from a blkg while associating with current. So,
the simplification and unification of what blk-throttle is doing caused
this.
Fixes: 08e18eab0c579 ("block: add bi_blkg to the bio for cgroups")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 4c6994806f708559c2812b73501406e21ae5dcd0.
Destroying blkgs is tricky because of the nature of the relationship. A
blkg should go away when either a blkcg or a request_queue goes away.
However, blkg's pin the blkcg to ensure they remain valid. To break this
cycle, when a blkcg is offlined, blkgs put back their css ref. This
eventually lets css_free() get called which frees the blkcg.
The above commit (4c6994806f70) breaks this order of events by trying to
destroy blkgs in css_free(). As the blkgs still hold references to the
blkcg, css_free() is never called.
The race between blkcg_bio_issue_check() and cgroup_rmdir() will be
addressed in the following patch by delaying destruction of a blkg until
all writeback associated with the blkcg has been finished.
Fixes: 4c6994806f70 ("blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull arm64 fixes from Will Deacon:
"A few arm64 fixes came in this week, specifically fixing some nasty
truncation of return values from firmware calls and resolving a
VM_BUG_ON due to accessing uninitialised struct pages corresponding to
NOMAP pages.
Summary:
- Fix typos in SVE documentation
- Fix type-checking and implicit truncation for SMCCC calls
- Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP
regions"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: always enable CONFIG_HOLES_IN_ZONE
arm/arm64: smccc-1.1: Handle function result as parameters
arm/arm64: smccc-1.1: Make return values unsigned long
Documentation/arm64/sve: Couple of improvements and typos
|
|
Pull i2c fixes from Wolfram Sang:
- regression fixes for i801 and designware
- better API and leak fix for releasing DMA safe buffers
- better greppable strings for the bitbang algorithm
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sh_mobile: fix leak when using DMA bounce buffer
i2c: sh_mobile: define start_ch() void as it only returns 0 anyhow
i2c: refactor function to release a DMA safe buffer
i2c: algos: bit: make the error messages grepable
i2c: designware: Re-init controllers with pm_disabled set on resume
i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus
|
|
In preparation to remove direct access to device_node.type, add
of_node_is_type() and of_node_get_device_type() helpers to check and
retrieve the device type.
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
a) rename to 'put' instead of 'release' to match 'get' when obtaining
the buffer
b) change the argument order to have the buffer as first argument
c) add a new argument telling the function if the message was
transferred. This allows the function to be used also in cases
where setting up DMA failed, so the buffer needs to be freed without
syncing to the message buffer.
Also convert the only user.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
In preparation to remove device_node.name pointer, add helper functions
for node name comparisons which are a common pattern throughout the kernel.
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This is going to be used by overlayfs and possibly useful
for other filesystems.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If someone has the silly idea to write something along those lines:
extern u64 foo(void);
void bar(struct arm_smccc_res *res)
{
arm_smccc_1_1_smc(0xbad, foo(), res);
}
they are in for a surprise, as this gets compiled as:
0000000000000588 <bar>:
588: a9be7bfd stp x29, x30, [sp, #-32]!
58c: 910003fd mov x29, sp
590: f9000bf3 str x19, [sp, #16]
594: aa0003f3 mov x19, x0
598: aa1e03e0 mov x0, x30
59c: 94000000 bl 0 <_mcount>
5a0: 94000000 bl 0 <foo>
5a4: aa0003e1 mov x1, x0
5a8: d4000003 smc #0x0
5ac: b4000073 cbz x19, 5b8 <bar+0x30>
5b0: a9000660 stp x0, x1, [x19]
5b4: a9010e62 stp x2, x3, [x19, #16]
5b8: f9400bf3 ldr x19, [sp, #16]
5bc: a8c27bfd ldp x29, x30, [sp], #32
5c0: d65f03c0 ret
5c4: d503201f nop
The call to foo "overwrites" the x0 register for the return value,
and we end up calling the wrong secure service.
A solution is to evaluate all the parameters before assigning
anything to specific registers, leading to the expected result:
0000000000000588 <bar>:
588: a9be7bfd stp x29, x30, [sp, #-32]!
58c: 910003fd mov x29, sp
590: f9000bf3 str x19, [sp, #16]
594: aa0003f3 mov x19, x0
598: aa1e03e0 mov x0, x30
59c: 94000000 bl 0 <_mcount>
5a0: 94000000 bl 0 <foo>
5a4: aa0003e1 mov x1, x0
5a8: d28175a0 mov x0, #0xbad
5ac: d4000003 smc #0x0
5b0: b4000073 cbz x19, 5bc <bar+0x34>
5b4: a9000660 stp x0, x1, [x19]
5b8: a9010e62 stp x2, x3, [x19, #16]
5bc: f9400bf3 ldr x19, [sp, #16]
5c0: a8c27bfd ldp x29, x30, [sp], #32
5c4: d65f03c0 ret
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
Martin Schwidefsky
Greg Kroah-Hartman
Takashi Iwai
Linus Torvalds
Marek Marczykowski-Górecki
Andrew Murray
Sabrina Dubroca
Yu Zhao
David S. Miller
Dennis Dalessandro
Jens Axboe
Peter Zijlstra
Tariq Toukan
Jack Morgenstein
Steven Rostedt (VMware)
Randy Dunlap
Benjamin Tissoires
Gleb Fotengauer-Malinovskiy
Anthony Wong
Christian Borntraeger
Vinson Lee
Dennis Zhou (Facebook)
Rob Herring
Wolfram Sang
Amir Goldstein
Marc Zyngier