aboutsummaryrefslogtreecommitdiffstats
path: root/include (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn2-12/+20
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: remove states PHY_STARTING and PHY_PENDINGHeiner Kallweit1-20/+2
Both states aren't used. Most likely they result from an idea that never materialized. So remove them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: sched: register callbacks for indirect tc block bindsJohn Hurley2-0/+37
Currently drivers can register to receive TC block bind/unbind callbacks by implementing the setup_tc ndo in any of their given netdevs. However, drivers may also be interested in binds to higher level devices (e.g. tunnel drivers) to potentially offload filters applied to them. Introduce indirect block devs which allows drivers to register callbacks for block binds on other devices. The callback is triggered when the device is bound to a block, allowing the driver to register for rules applied to that block using already available functions. Freeing an indirect block callback will trigger an unbind event (if necessary) to direct the driver to remove any offloaded rules and unreg any block rule callbacks. It is the responsibility of the implementing driver to clean any registered indirect block callbacks before exiting, if the block it still active at such a time. Allow registering an indirect block dev callback for a device that is already bound to a block. In this case (if it is an ingress block), register and also trigger the callback meaning that any already installed rules can be replayed to the calling driver. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: add macros for PHYID matchingHeiner Kallweit1-0/+4
Add macros for PHYID matching to be used in PHY driver configs. By using these macros some boilerplate code can be avoided. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: simplify phy_mac_interrupt and related functionsHeiner Kallweit1-3/+0
When using phy_mac_interrupt() the irq number is set to PHY_IGNORE_INTERRUPT, therefore phy_interrupt_is_valid() returns false. As a result phy_change() effectively just calls phy_trigger_machine() when called from phy_mac_interrupt() via phy_change_work(). So we can call phy_trigger_machine() from phy_mac_interrupt() directly and remove some now unneeded code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: don't set state PHY_CHANGELINK in phy_changeHeiner Kallweit1-5/+2
State PHY_CHANGELINK isn't needed here, we can call the state machine directly. We just have to remove the check for phy_polling_mode() to make this work also in interrupt mode. Removing this check doesn't cause any overhead because when not polling the state machine is called only if required by some event. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: remove flag PHY_HAS_INTERRUPT from driver configsHeiner Kallweit1-3/+2
Now that flag PHY_HAS_INTERRUPT has been replaced with a check for callbacks config_intr and ack_interrupt, we can remove setting this flag from all driver configs. Last but not least remove flag PHY_HAS_INTERRUPT completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: phy: leds: Don't make our own link speed namesKyle Roeschley1-1/+1
The phy core provides a handy phy_speed_to_str() helper, so use that instead of doing our own formatting of the different known link speeds. To do this, increase PHY_LED_TRIGGER_SPEED_SUFFIX_SIZE to 11 so we can fit 'Unsupported' if necessary. Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: phy: improve struct phy_device member interrupts handlingHeiner Kallweit1-5/+5
As a heritage from the very early days of phylib member interrupts is defined as u32 even though it's just a flag whether interrupts are enabled. So we can change it to a bitfield member. In addition change the code dealing with this member in a way that it's clear we're dealing with a bool value. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09ptp: deprecate gettime64() in favor of gettimex64()Miroslav Lichvar1-0/+2
When a driver provides gettimex64(), use it in the PTP_SYS_OFFSET ioctl and POSIX clock's gettime() instead of gettime64(). Drivers should provide only one of the functions. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09ptp: add PTP_SYS_OFFSET_EXTENDED ioctlMiroslav Lichvar2-0/+43
The PTP_SYS_OFFSET ioctl, which can be used to measure the offset between a PHC and the system clock, includes the total time that the driver needs to read the PHC timestamp. This typically involves reading of multiple PCI registers (sometimes in multiple iterations) and the register that contains the lowest bits of the timestamp is not read in the middle between the two readings of the system clock. This asymmetry causes the measured offset to have a significant error. Introduce a new ioctl, driver function, and helper functions, which allow the reading of the lowest register to be isolated from the other readings in order to reduce the asymmetry. The ioctl returns three timestamps for each measurement: - system time right before reading the lowest bits of the PHC timestamp - PHC time - system time immediately after reading the lowest bits of the PHC timestamp Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: sched: red: inform offloads about harddrop settingJakub Kicinski1-0/+1
To mirror software behaviour on offload more precisely inform the drivers about the state of the harddrop flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: 8021q: vlan_core: allow use list of vlans for real deviceIvan Khoronzhuk1-0/+11
It's redundancy for the drivers to hold the list of vlans when absolutely the same list exists in vlan core. In most cases it's needed only to traverse the vlan devices, their vids and sync some settings with h/w, so add API to simplify this. At least some of these drivers also can benefit: grep "for_each.*vid" -r drivers/net/ethernet/ drivers/net/ethernet/hisilicon/hns3/hns3_enet.c: drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c: drivers/net/ethernet/qlogic/qlge/qlge_main.c: drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c: drivers/net/ethernet/via/via-rhine.c: drivers/net/ethernet/via/via-velocity.c: drivers/net/ethernet/intel/igb/igb_main.c: drivers/net/ethernet/intel/ice/ice_main.c: drivers/net/ethernet/intel/e1000/e1000_main.c: drivers/net/ethernet/intel/i40e/i40e_main.c: drivers/net/ethernet/intel/e1000e/netdev.c: drivers/net/ethernet/intel/igbvf/netdev.c: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: drivers/net/ethernet/intel/ixgb/ixgb_main.c: drivers/net/ethernet/intel/ixgbe/ixgbe_main.c: drivers/net/ethernet/amd/xgbe/xgbe-dev.c: drivers/net/ethernet/emulex/benet/be_main.c: drivers/net/ethernet/neterion/vxge/vxge-main.c: drivers/net/ethernet/adaptec/starfire.c: drivers/net/ethernet/brocade/bna/bnad.c: Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: core: dev_addr_lists: add auxiliary func to handle reference address updatesIvan Khoronzhuk1-0/+10
In order to avoid all table update, and only remove or add new address, the auxiliary function exists, named __hw_addr_sync_dev(). It allows end driver do nothing when nothing changed and add/rm when concrete address is firstly added or lastly removed. But it doesn't include cases when an address of real device or vlan was reused by other vlans or vlan/macval devices. For handaling events when address was reused/unreused the patch adds new auxiliary routine - __hw_addr_ref_sync_dev(). It allows to do nothing when nothing was changed and do updates only for an address being added/reused/deleted/unreused. Thus, clone address changes for vlans can be mirrored in the table. The function is exclusive with __hw_addr_sync_dev(). It's responsibility of the end driver to identify address vlan device, if it needs so. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08udp: Support for error handlers of tunnels with arbitrary destination portStefano Brivio2-0/+3
ICMP error handling is currently not possible for UDP tunnels not employing a receiving socket with local destination port matching the remote one, because we have no way to look them up. Add an err_handler tunnel encapsulation operation that can be exported by tunnels in order to pass the error to the protocol implementing the encapsulation. We can't easily use a lookup function as we did for VXLAN and GENEVE, as protocol error handlers, which would be in turn called by implementations of this new operation, handle the errors themselves, together with the tunnel lookup. Without a socket, we can't be sure which encapsulation error handler is the appropriate one: encapsulation handlers (the ones for FoU and GUE introduced in the next patch, e.g.) will need to check the new error codes returned by protocol handlers to figure out if errors match the given encapsulation, and, in turn, report this error back, so that we can try all of them in __udp{4,6}_lib_err_encap_no_sk() until we have a match. v2: - Name all arguments in err_handler prototypes (David Miller) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: Convert protocol error handlers from void to intStefano Brivio5-6/+11
We'll need this to handle ICMP errors for tunnels without a sending socket (i.e. FoU and GUE). There, we might have to look up different types of IP tunnels, registered as network protocols, before we get a match, so we want this for the error handlers of IPPROTO_IPIP and IPPROTO_IPV6 in both inet_protos and inet6_protos. These error codes will be used in the next patch. For consistency, return sensible error codes in protocol error handlers whenever handlers can't handle errors because, even if valid, they don't match a protocol or any of its states. This has no effect on existing error handling paths. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08geneve: Allow configuration of DF behaviourStefano Brivio1-0/+9
draft-ietf-nvo3-geneve-08 says: It is strongly RECOMMENDED that Path MTU Discovery ([RFC1191], [RFC1981]) be used by setting the DF bit in the IP header when Geneve packets are transmitted over IPv4 (this is the default with IPv6). Now that ICMP error handling is working for GENEVE, we can comply with this recommendation. Make this configurable, though, to avoid breaking existing setups. By default, DF won't be set. It can be set or inherited from inner IPv4 packets. If it's configured to be inherited and we are encapsulating IPv6, it will be set. This only applies to non-lwt tunnels: if an external control plane is used, tunnel key will still control the DF flag. v2: - DF behaviour configuration only applies for non-lwt tunnels, apply DF setting only if (!geneve->collect_md) in geneve_xmit_skb() (Stephen Hemminger) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08vxlan: Allow configuration of DF behaviourStefano Brivio2-0/+10
Allow users to set the IPv4 DF bit in outgoing packets, or to inherit its value from the IPv4 inner header. If the encapsulated protocol is IPv6 and DF is configured to be inherited, always set it. For IPv4, inheriting DF from the inner header was probably intended from the very beginning judging by the comment to vxlan_xmit(), but it wasn't actually implemented -- also because it would have done more harm than good, without handling for ICMP Fragmentation Needed messages. According to RFC 7348, "Path MTU discovery MAY be used". An expired RFC draft, draft-saum-nvo3-pmtud-over-vxlan-05, whose purpose was to describe PMTUD implementation, says that "is a MUST that Vxlan gateways [...] SHOULD set the DF-bit [...]", whatever that means. Given this background, the only sane option is probably to let the user decide, and keep the current behaviour as default. This only applies to non-lwt tunnels: if an external control plane is used, tunnel key will still control the DF flag. v2: - DF behaviour configuration only applies for non-lwt tunnels, move DF setting to if (!info) block in vxlan_xmit_one() (Stephen Hemminger) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08udp: Handle ICMP errors for tunnels with same destination port on both endpointsStefano Brivio2-0/+4
For both IPv4 and IPv6, if we can't match errors to a socket, try tunnels before ignoring them. Look up a socket with the original source and destination ports as found in the UDP packet inside the ICMP payload, this will work for tunnels that force the same destination port for both endpoints, i.e. VXLAN and GENEVE. Actually, lwtunnels could break this assumption if they are configured by an external control plane to have different destination ports on the endpoints: in this case, we won't be able to trace ICMP messages back to them. For IPv6 redirect messages, call ip6_redirect() directly with the output interface argument set to the interface we received the packet from (as it's the very interface we should build the exception on), otherwise the new nexthop will be rejected. There's no such need for IPv4. Tunnels can now export an encap_err_lookup() operation that indicates a match. Pass the packet to the lookup function, and if the tunnel driver reports a matching association, continue with regular ICMP error handling. v2: - Added newline between network and transport header sets in __udp{4,6}_lib_err_encap() (David Miller) - Removed redundant skb_reset_network_header(skb); in __udp4_lib_err_encap() - Removed redundant reassignment of iph in __udp4_lib_err_encap() (Sabrina Dubroca) - Edited comment to __udp{4,6}_lib_err_encap() to reflect the fact this won't work with lwtunnels configured to use asymmetric ports. By the way, it's VXLAN, not VxLAN (Jiri Benc) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: sched: add an offload graft helperJakub Kicinski1-0/+12
Qdisc graft operation of offload-capable qdiscs performs a few extra steps which are identical among all the qdiscs. Add a helper to share this code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: sched: add an offload dump helperJakub Kicinski1-0/+12
Qdisc dump operation of offload-capable qdiscs performs a few extra steps which are identical among all the qdiscs. Add a helper to share this code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: phy: remove state PHY_ANHeiner Kallweit1-18/+1
After the recent changes in the state machine state PHY_AN isn't used any longer and can be removed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: add netif_is_geneve()John Hurley1-0/+6
Add a helper function to determine if the type of a netdev is geneve based on its rtnl_link_ops. This allows drivers that may wish to offload tunnels to check the underlying type of the device. A recent patch added a similar helper to vxlan.h Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net/vlan: remove unused #define HAVE_VLAN_GET_TAGMichał Mirosław1-2/+0
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net/vlan: include the shift in skb_vlan_tag_get_prio()Michał Mirosław1-1/+1
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net/vlan: introduce __vlan_hwaccel_copy_tag() helperMichał Mirosław1-0/+13
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net/vlan: introduce __vlan_hwaccel_clear_tag() helperMichał Mirosław1-1/+12
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: phy: make phy_trigger_machine staticHeiner Kallweit1-1/+0
phy_trigger_machine() is used in phy.c only, so we can make it static. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: phy: bcm7xxx: Add entry for BCM7255Justin Chen1-0/+1
Add support for BCM7255 EPHY. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07udp: cope with UDP GRO packet misdirectionPaolo Abeni2-8/+43
In some scenarios, the GRO engine can assemble an UDP GRO packet that ultimately lands on a non GRO-enabled socket. This patch tries to address the issue explicitly checking for the UDP socket features before enqueuing the packet, and eventually segmenting the unexpected GRO packet, as needed. We must also cope with re-insertion requests: after segmentation the UDP code calls the helper introduced by the previous patches, as needed. Segmentation is performed by a common helper, which takes care of updating socket and protocol stats is case of failure. rfc v3 -> v1 - fix compile issues with rxrpc - when gso_segment returns NULL, treat is as an error - added 'ipv4' argument to udp_rcv_segment() rfc v2 -> rfc v3 - moved udp_rcv_segment() into net/udp.h, account errors to socket and ns, always return NULL or segs list Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07ipv6: factor out protocol delivery helperPaolo Abeni1-0/+2
So that we can re-use it at the UDP level in the next patch rfc v3 -> v1: - add the helper declaration into the ipv6 header Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07ip: factor out protocol delivery helperPaolo Abeni1-0/+1
So that we can re-use it at the UDP level in a later patch rfc v3 -> v1 - add the helper declaration into the ip header Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07udp: add support for UDP_GRO cmsgPaolo Abeni1-0/+11
When UDP GRO is enabled, the UDP_GRO cmsg will carry the ingress datagram size. User-space can use such info to compute the original packets layout. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07udp: implement GRO for plain UDP sockets.Paolo Abeni2-1/+3
This is the RX counterpart of commit bec1f6f69736 ("udp: generate gso with UDP_SEGMENT"). When UDP_GRO is enabled, such socket is also eligible for GRO in the rx path: UDP segments directed to such socket are assembled into a larger GSO_UDP_L4 packet. The core UDP GRO support is enabled with setsockopt(UDP_GRO). Initial benchmark numbers: Before: udp rx: 1079 MB/s 769065 calls/s After: udp rx: 1466 MB/s 24877 calls/s This change introduces a side effect in respect to UDP tunnels: after a UDP tunnel creation, now the kernel performs a lookup per ingress UDP packet, while before such lookup happened only if the ingress packet carried a valid internal header csum. rfc v2 -> rfc v3: - fixed typos in macro name and comments - really enforce UDP_GRO_CNT_MAX, instead of UDP_GRO_CNT_MAX + 1 - acquire socket lock in UDP_GRO setsockopt rfc v1 -> rfc v2: - use a new option to enable UDP GRO - use static keys to protect the UDP GRO socket lookup Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07udp: implement complete book-keeping for encap_neededPaolo Abeni2-1/+12
The *encap_needed static keys are enabled by UDP tunnels and several UDP encapsulations type, but they are never turned off. This can cause unneeded overall performance degradation for systems where such features are used transiently. This patch introduces complete book-keeping for such keys, decreasing the usage at socket destruction time, if needed, and avoiding that the same socket could increase the key usage multiple times. rfc v3 -> v1: - add socket lock around udp_tunnel_encap_enable() rfc v2 -> rfc v3: - use udp_tunnel_encap_enable() in setsockopt() Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: fix raw socket lookup device bind matching with VRFsDuncan Eastoe1-1/+12
When there exist a pair of raw sockets one unbound and one bound to a VRF but equal in all other respects, when a packet is received in the VRF context, __raw_v4_lookup() matches on both sockets. This results in the packet being delivered over both sockets, instead of only the raw socket bound to the VRF. The bound device checks in __raw_v4_lookup() are replaced with a call to raw_sk_bound_dev_eq() which correctly handles whether the packet should be delivered over the unbound socket in such cases. In __raw_v6_lookup() the match on the device binding of the socket is similarly updated to use raw_sk_bound_dev_eq() which matches the handling in __raw_v4_lookup(). Importantly raw_sk_bound_dev_eq() takes the raw_l3mdev_accept sysctl into account. Signed-off-by: Duncan Eastoe <deastoe@vyatta.att-mail.com> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFsMike Manning2-0/+4
Add a sysctl raw_l3mdev_accept to control raw socket lookup in a manner similar to use of tcp_l3mdev_accept for stream and of udp_l3mdev_accept for datagram sockets. Have this default to enabled for reasons of backwards compatibility. This is so as to specify the output device with cmsg and IP_PKTINFO, but using a socket not bound to the corresponding VRF. This allows e.g. older ping implementations to be run with specifying the device but without executing it in the VRF. If the option is disabled, packets received in a VRF context are only handled by a raw socket bound to the VRF, and correspondingly packets in the default VRF are only handled by a socket not bound to any VRF. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: ensure unbound datagram socket to be chosen when not in a VRFMike Manning1-0/+11
Ensure an unbound datagram skt is chosen when not in a VRF. The check for a device match in compute_score() for UDP must be performed when there is no device match. For this, a failure is returned when there is no device match. This ensures that bound sockets are never selected, even if there is no unbound socket. Allow IPv6 packets to be sent over a datagram skt bound to a VRF. These packets are currently blocked, as flowi6_oif was set to that of the master vrf device, and the ipi6_ifindex is that of the slave device. Allow these packets to be sent by checking the device with ipi6_ifindex has the same L3 scope as that of the bound device of the skt, which is the master vrf device. Note that this check always succeeds if the skt is unbound. Even though the right datagram skt is now selected by compute_score(), a different skt is being returned that is bound to the wrong vrf. The difference between these and stream sockets is the handling of the skt option for SO_REUSEPORT. While the handling when adding a skt for reuse correctly checks that the bound device of the skt is a match, the skts in the hashslot are already incorrect. So for the same hash, a skt for the wrong vrf may be selected for the required port. The root cause is that the skt is immediately placed into a slot when it is created, but when the skt is then bound using SO_BINDTODEVICE, it remains in the same slot. The solution is to move the skt to the correct slot by forcing a rehash. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: ensure unbound stream socket to be chosen when not in a VRFMike Manning2-0/+19
The commit a04a480d4392 ("net: Require exact match for TCP socket lookups if dif is l3mdev") only ensures that the correct socket is selected for packets in a VRF. However, there is no guarantee that the unbound socket will be selected for packets when not in a VRF. By checking for a device match in compute_score() also for the case when there is no bound device and attaching a score to this, the unbound socket is selected. And if a failure is returned when there is no device match, this ensures that bound sockets are never selected, even if there is no unbound socket. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: allow binding socket in a VRF when there's an unbound socketRobert Shearman3-10/+21
Change the inet socket lookup to avoid packets arriving on a device enslaved to an l3mdev from matching unbound sockets by removing the wildcard for non sk_bound_dev_if and instead relying on check against the secondary device index, which will be 0 when the input device is not enslaved to an l3mdev and so match against an unbound socket and not match when the input device is enslaved. Change the socket binding to take the l3mdev into account to allow an unbound socket to not conflict sockets bound to an l3mdev given the datapath isolation now guaranteed. Signed-off-by: Robert Shearman <rshearma@vyatta.att-mail.com> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: Add extack argument to ip_fib_metrics_initDavid Ahern1-1/+2
Add extack argument to ip_fib_metrics_init and add messages for invalid metrics. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: Add extack argument to rtnl_create_linkDavid Ahern1-1/+2
Add extack arg to rtnl_create_link and add messages for invalid number of Tx or Rx queues. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: skbuff.h: remove unnecessary unlikely()Yangtao Li1-3/+1
WARN_ON() already contains an unlikely(), so it's not necessary to use unlikely. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds9-5/+75
Pull networking fixes from David Miller: 1) Handle errors mid-stream of an all dump, from Alexey Kodanev. 2) Fix build of openvswitch with certain combinations of netfilter options, from Arnd Bergmann. 3) Fix interactions between GSO and BQL, from Eric Dumazet. 4) Don't put a '/' in RTL8201F's sysfs file name, from Holger Hoffstätte. 5) S390 qeth driver fixes from Julian Wiedmann. 6) Allow ipv6 link local addresses for netconsole when both source and destination are link local, from Matwey V. Kornilov. 7) Fix the BPF program address seen in /proc/kallsyms, from Song Liu. 8) Initialize mutex before use in dsa microchip driver, from Tristram Ha. 9) Out-of-bounds access in hns3, from Yunsheng Lin. 10) Various netfilter fixes from Stefano Brivio, Jozsef Kadlecsik, Jiri Slaby, Florian Westphal, Eric Westbrook, Andrey Ryabinin, and Pablo Neira Ayuso. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (50 commits) net: alx: make alx_drv_name static net: bpfilter: fix iptables failure if bpfilter_umh is disabled sock_diag: fix autoloading of the raw_diag module net: core: netpoll: Enable netconsole IPv6 link local address ipv6: properly check return value in inet6_dump_all() rtnetlink: restore handling of dumpit return value in rtnl_dump_all() net/ipv6: Move anycast init/cleanup functions out of CONFIG_PROC_FS bonding/802.3ad: fix link_failure_count tracking net: phy: realtek: fix RTL8201F sysfs name sctp: define SCTP_SS_DEFAULT for Stream schedulers sctp: fix strchange_flags name for Stream Change Event mlxsw: spectrum: Fix IP2ME CPU policer configuration openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELS qed: fix link config error handling net: hns3: Fix for out-of-bounds access when setting pfc back pressure net/mlx4_en: use __netdev_tx_sent_queue() net: do not abort bulk send on BQL status net: bql: add __netdev_tx_sent_queue() s390/qeth: report 25Gbit link speed s390/qeth: sanitize ARP requests ...
2018-11-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller5-5/+48
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains the first batch of Netfilter fixes for your net tree: 1) Fix splat with IPv6 defragmenting locally generated fragments, from Florian Westphal. 2) Fix Incorrect check for missing attribute in nft_osf. 3) Missing INT_MIN & INT_MAX definition for netfilter bridge uapi header, from Jiri Slaby. 4) Revert map lookup in nft_numgen, this is already possible with the existing infrastructure without this extension. 5) Fix wrong listing of set reference counter, make counter synchronous again, from Stefano Brivio. 6) Fix CIDR 0 in hash:net,port,net, from Eric Westbrook. 7) Fix allocation failure with large set, use kvcalloc(). From Andrey Ryabinin. 8) No need to disable BH when fetch ip set comment, patch from Jozsef Kadlecsik. 9) Sanity check for valid sysfs entry in xt_IDLETIMER, from Taehee Yoo. 10) Fix suspicious rcu usage via ip_set() macro at netlink dump, from Jozsef Kadlecsik. 11) Fix setting default timeout via nfnetlink_cttimeout, this comes with preparation patch to add nf_{tcp,udp,...}_pernet() helper. 12) Allow ebtables table nat to be of filter type via nft_compat. From Florian Westphal. 13) Incorrect calculation of next bucket in early_drop, do no bump hash value, update bucket counter instead. From Vasily Khoruzhick. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-05compiler: remove __no_sanitize_address_or_inline againMartin Schwidefsky2-13/+1
The __no_sanitize_address_or_inline and __no_kasan_or_inline defines are almost identical. The only difference is that __no_kasan_or_inline does not have the 'notrace' attribute. To be able to replace __no_sanitize_address_or_inline with the older definition, add 'notrace' to __no_kasan_or_inline and change to two users of __no_sanitize_address_or_inline in the s390 code. The 'notrace' option is necessary for e.g. the __load_psw_mask function in arch/s390/include/asm/processor.h. Without the option it is possible to trace __load_psw_mask which leads to kernel stack overflow. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Pointed-out-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-04Merge tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds1-5/+2
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfix: - Fix build issues on architectures that don't provide 64-bit cmpxchg Cleanups: - Fix a spelling mistake" * tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fix spelling mistake, EACCESS -> EACCES SUNRPC: Use atomic(64)_t for seq_send(64)
2018-11-04Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+1
Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-03sctp: define SCTP_SS_DEFAULT for Stream schedulersXin Long1-0/+1
According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to defined as SCTP_SS_FCFS or SCTP_SS_RR. SCTP_SS_FCFS is used for SCTP_SS_DEFAULT's value in this patch. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03sctp: fix strchange_flags name for Stream Change EventXin Long1-0/+2
As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED and SCTP_STREAM_CHANGE_FAILED should be used instead of SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED. To keep the compatibility, fix it by adding two macros. Fixes: b444153fb5a6 ("sctp: add support for generating add stream change event notification") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.