aboutsummaryrefslogtreecommitdiffstats
path: root/include (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-09net-next: dsa: add flow_dissect callback to struct dsa_device_opsJohn Crispin1-0/+2
When the flow dissector first sees packets coming in on a DSA devices the 802.3 header wont be located where the code expects it to be as the tag is still present. Adding this new callback allows a DSA device to provide a new function that the flow_dissector can use to get the correct protocol and offset of the network header. Signed-off-by: Muciri Gatimu <muciri@openmesh.com> Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com> Signed-off-by: John Crispin <john@phrozen.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09net-next: dsa: move struct dsa_device_ops to the global header fileJohn Crispin1-0/+7
We need to access this struct from within the flow_dissector to fix dissection for packets coming in on DSA devices. Signed-off-by: Muciri Gatimu <muciri@openmesh.com> Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09rtnetlink: add RTNL_FLAG_DOIT_UNLOCKEDFlorian Westphal1-0/+4
Allow callers to tell rtnetlink core that its doit callback should be invoked without holding rtnl mutex. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09rtnetlink: make rtnl_register accept a flags parameterFlorian Westphal1-3/+2
This change allows us to later indicate to rtnetlink core that certain doit functions should be called without acquiring rtnl_mutex. This change should have no effect, we simply replace the last (now unused) calcit argument with the new flag. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09bpf: add BPF_J{LT,LE,SLT,SLE} instructionsDaniel Borkmann1-0/+5
Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09sock: fix zerocopy_success regression with msg_zerocopyWillem de Bruijn1-2/+7
Do not use uarg->zerocopy outside msg_zerocopy. In other paths the field is not explicitly initialized and aliases another field. Those paths have only one reference so do not need this intermediate variable. Call uarg->callback directly. Fixes: 1f8b977ab32d ("sock: enable MSG_ZEROCOPY") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller7-7/+36
The UDP offload conflict is dealt with by simply taking what is in net-next where we have removed all of the UFO handling code entirely. The TCP conflict was a case of local variables in a function being removed from both net and net-next. In netvsc we had an assignment right next to where a missing set of u64 stats sync object inits were added. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds1-1/+2
Pull i2c fixes from Wolfram Sang: "The main thing is to allow empty id_tables for ACPI to make some drivers get probed again. It looks a bit bigger than usual because it needs some internal renaming, too. Other than that, there is a fix for broken DSTDs, a super simple enablement for ARM MPS, and two documentation fixes which I'd like to see in v4.13 already" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rephrase explanation of I2C_CLASS_DEPRECATED i2c: allow i2c-versatile for ARM MPS platforms i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz i2c: designware: Print clock freq on invalid clock freq error i2c: core: Allow empty id_table in ACPI case as well i2c: mux: pinctrl: mention correct module name in Kconfig help text
2017-08-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-0/+31
Pull networking fixes from David Miller: "The pull requests are getting smaller, that's progress I suppose :-) 1) Fix infinite loop in CIPSO option parsing, from Yujuan Qi. 2) Fix remote checksum handling in VXLAN and GUE tunneling drivers, from Koichiro Den. 3) Missing u64_stats_init() calls in several drivers, from Florian Fainelli. 4) TCP can set the congestion window to an invalid ssthresh value after congestion window reductions, from Yuchung Cheng. 5) Fix BPF jit branch generation on s390, from Daniel Borkmann. 6) Correct MIPS ebpf JIT merge, from David Daney. 7) Correct byte order test in BPF test_verifier.c, from Daniel Borkmann. 8) Fix various crashes and leaks in ASIX driver, from Dean Jenkins. 9) Handle SCTP checksums properly in mlx4 driver, from Davide Caratti. 10) We can potentially enter tcp_connect() with a cached route already, due to fastopen, so we have to explicitly invalidate it. 11) skb_warn_bad_offload() can bark in legitimate situations, fix from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) net: avoid skb_warn_bad_offload false positives on UFO qmi_wwan: fix NULL deref on disconnect ppp: fix xmit recursion detection on ppp channels rds: Reintroduce statistics counting tcp: fastopen: tcp_connect() must refresh the route net: sched: set xt_tgchk_param par.net properly in ipt_init_target net: dsa: mediatek: add adjust link support for user ports net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()' hysdn: fix to a race condition in put_log_buffer s390/qeth: fix L3 next-hop in xmit qeth hdr asix: Fix small memory leak in ax88772_unbind() asix: Ensure asix_rx_fixup_info members are all reset asix: Add rx->ax_skb = NULL after usbnet_skb_return() bpf: fix selftest/bpf/test_pkt_md_access on s390x netvsc: fix race on sub channel creation bpf: fix byte order test in test_verifier xgene: Always get clk source, but ignore if it's missing for SGMII ports MIPS: Add missing file for eBPF JIT. bpf, s390: fix build for libbpf and selftest suite ...
2017-08-08net: ipv6: avoid overhead when no custom FIB rules are installedVincent Bernat1-0/+1
If the user hasn't installed any custom rules, don't go through the whole FIB rules layer. This is pretty similar to f4530fa574df (ipv4: Avoid overhead when no custom FIB rules are installed). Using a micro-benchmark module [1], timing ip6_route_output() with get_cycles(), with 40,000 routes in the main routing table, before this patch: min=606 max=12911 count=627 average=1959 95th=4903 90th=3747 50th=1602 mad=821 table=254 avgdepth=21.8 maxdepth=39 value │ ┊ count 600 │▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ 199 880 │▒▒▒░░░░░░░░░░░░░░░░ 43 1160 │▒▒▒░░░░░░░░░░░░░░░░░░░░ 48 1440 │▒▒▒░░░░░░░░░░░░░░░░░░░░░░░ 43 1720 │▒▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░ 59 2000 │▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 50 2280 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 26 2560 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 31 2840 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 28 3120 │▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 17 3400 │▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 17 3680 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 3960 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 11 4240 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 6 4520 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 6 4800 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 9 After: min=544 max=11687 count=627 average=1776 95th=4546 90th=3585 50th=1227 mad=565 table=254 avgdepth=21.8 maxdepth=39 value │ ┊ count 540 │▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ 201 800 │▒▒▒▒▒░░░░░░░░░░░░░░░░ 63 1060 │▒▒▒▒▒░░░░░░░░░░░░░░░░░░░░░ 68 1320 │▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░ 39 1580 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 32 1840 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 32 2100 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 34 2360 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 33 2620 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 26 2880 │▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 22 3140 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 9 3400 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 3660 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 9 3920 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 4180 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 4440 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 At the frequency of the host during the bench (~ 3.7 GHz), this is about a 100 ns difference on the median value. A next step would be to collapse local and main tables, as in 0ddcf43d5d4a (ipv4: FIB Local/MAIN table collapse). [1]: https://github.com/vincentbernat/network-lab/blob/master/lab-routes-ipv6/kbench_mod.c Signed-off-by: Vincent Bernat <vincent@bernat.im> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08bpf/verifier: track signed and unsigned min/max valuesEdward Cree2-9/+16
Allows us to, sometimes, combine information from a signed check of one bound and an unsigned check of the other. We now track the full range of possible values, rather than restricting ourselves to [0, 1<<30) and considering anything beyond that as unknown. While this is probably not necessary, it makes the code more straightforward and symmetrical between signed and unsigned bounds. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08bpf/verifier: rework value trackingEdward Cree3-35/+112
Unifies adjusted and unadjusted register value types (e.g. FRAME_POINTER is now just a PTR_TO_STACK with zero offset). Tracks value alignment by means of tracking known & unknown bits. This also replaces the 'reg->imm' (leading zero bits) calculations for (what were) UNKNOWN_VALUEs. If pointer leaks are allowed, and adjust_ptr_min_max_vals returns -EACCES, treat the pointer as an unknown scalar and try again, because we might be able to conclude something about the result (e.g. pointer & 0x40 is either 0 or 0x40). Verifier hooks in the netronome/nfp driver were changed to match the new data structures. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds1-1/+0
Pull rdma fixes from Doug Ledford: "Third set of -rc fixes for 4.13 cycle - small set of miscellanous fixes - a reasonably sizable set of IPoIB fixes that deal with multiple long standing issues" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/hns: checking for IS_ERR() instead of NULL RDMA/mlx5: Fix existence check for extended address vector IB/uverbs: Fix device cleanup RDMA/uverbs: Prevent leak of reserved field IB/core: Fix race condition in resolving IP to MAC IB/ipoib: Notify on modify QP failure only when relevant Revert "IB/core: Allow QP state transition from reset to error" IB/ipoib: Remove double pointer assigning IB/ipoib: Clean error paths in add port IB/ipoib: Add get statistics support to SRIOV VF IB/ipoib: Add multicast packets statistics IB/ipoib: Set IPOIB_NEIGH_TBL_FLUSH after flushed completion initialization IB/ipoib: Prevent setting negative values to max_nonsrq_conn_qp IB/ipoib: Make sure no in-flight joins while leaving that mcast IB/ipoib: Use cancel_delayed_work_sync when needed IB/ipoib: Fix race between light events and interface restart
2017-08-08Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+0
Pull SCSI fixes from James Bottomley: "Two small fixes, one re-fix of a previous fix and five patches sorting out hotplug in the bnx2X class of drivers. The latter is rather involved, but necessary because these drivers have started dropping lockdep recursion warnings on the hotplug lock because of its conversion to a percpu rwsem" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: only check for dxfer_len greater than 256M scsi: aacraid: reading out of bounds scsi: qedf: Limit number of CQs scsi: bnx2i: Simplify cpu hotplug code scsi: bnx2fc: Simplify CPU hotplug code scsi: bnx2i: Prevent recursive cpuhotplug locking scsi: bnx2fc: Prevent recursive cpuhotplug locking scsi: bnx2fc: Plug CPU hotplug race
2017-08-07Merge tag 'for-linus-20170807' of git://git.infradead.org/linux-mtdLinus Torvalds1-3/+3
Pull MTD fixes from Brian Norris: "I missed getting these out for rc4, but here are some MTD fixes. Just NAND fixes (in both the core handling, and a few drivers). Notes stolen from Boris: Core fixes: - fix data interface setup for ONFI NANDs that do not support the SET FEATURES command - fix a kernel doc header - fix potential integer overflow when retrieving timing information from the parameter page - fix wrong OOB layout for small page NANDs Driver fixes: - fix potential division-by-zero bug - fix backward compat with old atmel-nand DT bindings - fix ->setup_data_interface() in the atmel NAND driver" * tag 'for-linus-20170807' of git://git.infradead.org/linux-mtd: mtd: nand: atmel: Fix EDO mode check mtd: nand: Declare tBERS, tR and tPROG as u64 to avoid integer overflow mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES mtd: nand: Fix a docs build warning mtd: nand: sunxi: fix potential divide-by-zero error nand: fix wrong default oob layout for small pages using soft ecc mtd: nand: atmel: Fix DT backward compatibility in pmecc.c
2017-08-07net: switchdev: Remove bridge bypass support from switchdevArkadi Sharshevsky1-75/+0
Currently the bridge port flags, vlans, FDBs and MDBs can be offloaded through the bridge code, making the switchdev's SELF bridge bypass implementation to be redundant. This implies several changes: - No need for dump infra in switchdev, DSA's special case is handled privately. - Remove obj_dump from switchdev_ops. - FDBs are removed from obj_add/del routines, due to the fact that they are offloaded through the bridge notification chain. - The switchdev_port_bridge_xx() and switchdev_port_fdb_xx() functions can be removed. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Move FDB dump implementation inside DSAArkadi Sharshevsky2-14/+3
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove redundant MDB dump supportArkadi Sharshevsky1-4/+0
Currently the MDB HW database is synced with the bridge's one, thus, There is no need to support special dump functionality. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove support for bypass bridge port attributes/vlan setArkadi Sharshevsky1-4/+0
The bridge port attributes/vlan for DSA devices should be set only from bridge code. Furthermore, The vlans are synced totally with the bridge so there is no need for special dump support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove prepare phase for FDBArkadi Sharshevsky1-3/+1
The prepare phase for FDB add is unneeded because most of DSA devices can have failures during bus transactions (SPI, I2C, etc.), thus, the prepare phase cannot guarantee success of the commit stage. The support for learning FDB through notification chain, which will be introduced in the following patches, will provide the ability to notify back the bridge about successful offload. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Change DSA slave FDB API to be switchdev independentArkadi Sharshevsky1-5/+3
In order to support FDB add/del to be on a notifier chain the slave API need to be changed to be switchdev independent. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07ipv6: sr: define core operations for seg6local lightweight tunnelDavid Lebrun4-0/+77
This patch implements a new type of lightweight tunnel named seg6local. A seg6local lwt is defined by a type of action and a set of parameters. The action represents the operation to perform on the packets matching the lwt's route, and is not necessarily an encapsulation. The set of parameters are arguments for the processing function. Each action is defined in a struct seg6_action_desc within seg6_action_table[]. This structure contains the action, mandatory attributes, the processing function, and a static headroom size required by the action. The mandatory attributes are encoded as a bitmask field. The static headroom is set to a non-zero value when the processing function always add a constant number of bytes to the skb (e.g. the header size for encapsulations). To facilitate rtnetlink-related operations such as parsing, fill_encap, and cmp_encap, each type of action parameter is associated to three function pointers, in seg6_action_params[]. All actions defined in seg6_local.h are detailed in [1]. [1] https://tools.ietf.org/html/draft-filsfils-spring-srv6-network-programming-01 Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07ipv6: sr: export SRH insertion functionsDavid Lebrun1-0/+2
This patch exports the seg6_do_srh_encap() and seg6_do_srh_inline() functions. It also removes the CONFIG_IPV6_SEG6_INLINE knob that enabled the compilation of seg6_do_srh_inline(). This function is now built-in. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net_sched: use void pointer for filter handleWANG Cong2-5/+5
Now we use 'unsigned long fh' as a pointer in every place, it is safe to convert it to a void pointer now. This gets rid of many casts to pointer. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07bpf: add support for sys_enter_* and sys_exit_* tracepointsYonghong Song1-0/+12
Currently, bpf programs cannot be attached to sys_enter_* and sys_exit_* style tracepoints. The iovisor/bcc issue #748 (https://github.com/iovisor/bcc/issues/748) documents this issue. For example, if you try to attach a bpf program to tracepoints syscalls/sys_enter_newfstat, you will get the following error: # ./tools/trace.py t:syscalls:sys_enter_newfstat Ioctl(PERF_EVENT_IOC_SET_BPF): Invalid argument Failed to attach BPF to tracepoint The main reason is that syscalls/sys_enter_* and syscalls/sys_exit_* tracepoints are treated differently from other tracepoints and there is no bpf hook to it. This patch adds bpf support for these syscalls tracepoints by . permitting bpf attachment in ioctl PERF_EVENT_IOC_SET_BPF . calling bpf programs in perf_syscall_enter and perf_syscall_exit The legality of bpf program ctx access is also checked. Function trace_event_get_offsets returns correct max offset for each specific syscall tracepoint, which is compared against the maximum offset access in bpf program. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv6: add second dif to raw socket lookupsDavid Ahern1-1/+1
Add a second device index, sdif, to raw socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv6: add second dif to inet6 socket lookupsDavid Ahern2-9/+23
Add a second device index, sdif, to inet6 socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. TCP moves the data in the cb. Prior to tcp_v4_rcv (e.g., early demux) the ingress index is obtained from IPCB using inet_sdif and after tcp_v4_rcv tcp_v4_sdif is used. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv6: add second dif to udp socket lookupsDavid Ahern2-1/+11
Add a second device index, sdif, to udp socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Early demux lookups are handled in the next patch as part of INET_MATCH changes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv4: add second dif to multicast source filterDavid Ahern1-1/+2
Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv4: add second dif to raw socket lookupsDavid Ahern1-1/+1
Add a second device index, sdif, to raw socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv4: add second dif to inet socket lookupsDavid Ahern2-14/+27
Add a second device index, sdif, to inet socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. TCP moves the data in the cb. Prior to tcp_v4_rcv (e.g., early demux) the ingress index is obtained from IPCB using inet_sdif and after the cb move in tcp_v4_rcv the tcp_v4_sdif helper is used. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv4: add second dif to udp socket lookupsDavid Ahern2-1/+11
Add a second device index, sdif, to udp socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Early demux lookups are handled in the next patch as part of INET_MATCH changes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07Merge tag 'mlx5-shared-2017-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxDavid S. Miller19-79/+71
Saeed Mahameed says: ==================== mlx5-shared-2017-08-07 This series includes some mlx5 updates for both net-next and rdma trees. From Saeed, Core driver updates to allow selectively building the driver with or without some large driver components, such as - E-Switch (Ethernet SRIOV support). - Multi-Physical Function Switch (MPFs) support. For that we split E-Switch and MPFs functionalities into separate files. From Erez, Delay mlx5_core events when mlx5 interfaces, namely mlx5_ib, registration is taking place and until it completes. From Rabie, Increase the maximum supported flow counters. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: get rid of struct tc_to_netdevJiri Pirko1-17/+2
Get rid of struct tc_to_netdev which is now just unnecessary container and rather pass per-type structures down to drivers directly. Along with that, consolidate the naming of per-type structure variables in cls_*. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: move prio into cls_commonJiri Pirko1-1/+2
prio is not cls_flower specific, but it is meaningful for all classifiers. Seems that only mlxsw cares about the value. Obviously, cls offload in other drivers is broken. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: push cls related args into cls_common structureJiri Pirko2-3/+19
As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: make egress_dev flag part of flower offload structJiri Pirko2-1/+1
Since this is specific to flower now, make it part of the flower offload struct. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: rename TC_SETUP_MATCHALL to TC_SETUP_CLSMATCHALLJiri Pirko1-1/+1
In order to be aligned with the rest of the types, rename TC_SETUP_MATCHALL to TC_SETUP_CLSMATCHALL. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: make type an argument for ndo_setup_tcJiri Pirko1-4/+5
Since the type is always present, push it to be a separate argument to ndo_setup_tc. On the way, name the type enum and use it for arg type. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net/mlx5: Increase the maximum flow counters supportedRabie Loulou1-10/+6
Read new NIC capability field which represnts 16 MSBs of the max flow counters number supported (max_flow_counter_31_16). Backward compatibility with older firmware is preserved, the modified driver reads max_flow_counter_31_16 as 0 from the older firmware and uses up to 64K counters. Changed flow counter id from 16 bits to 32 bits. Backward compatibility with older firmware is preserved as we kept the 16 LSBs of the counter id in place and added 16 MSBs from reserved field. Changed the background bulk reading of flow counters to work in chunks of at most 32K counters, to make sure we don't attempt to allocate very large buffers. Signed-off-by: Rabie Loulou <rabiel@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-07net/mlx5: Fix counter list hardware structureRabie Loulou1-2/+1
The counter list hardware structure doesn't contain a clear and num_of_counters fields, remove them. These wrong fields were never used by the driver hence no other driver changes. Fixes: a351a1b03bf1 ("net/mlx5: Introduce bulk reading of flow counters") Signed-off-by: Rabie Loulou <rabiel@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-07net/mlx5: Delay events till ib registration endsErez Shitrit1-0/+3
When mlx5_ib registers itself to mlx5_core as an interface, it will call mlx5_add_device which will call mlx5_ib interface add callback, in case the latter successfully returns, only then mlx5_core will add it to the interface list and async events will be forwarded to mlx5_ib. Between mlx5_ib interface add callback and mlx5_core adding the mlx5_ib interface to its devices list, arriving mlx5_core events can be missed by the new mlx5_ib registering interface. In other words: thread 1: mlx5_ib: mlx5_register_interface(dev) thread 1: mlx5_core: mlx5_add_device(dev) thread 1: mlx5_core: ctx = dev->add => (mlx5_ib)->mlx5_ib_add thread 2: mlx5_core_event: **new event arrives, forward to dev_list thread 1: mlx5_core: add_ctx_to_dev_list(ctx) /* previous event was missed by the new interface.*/ It is ok to miss events before dev->add (mlx5_ib)->mlx5_ib_add_device but not after. We fix this race by accumulating the events that come between the ib_register_device (inside mlx5_add_device->(dev->add)) till the adding to the list completes and fire them to the new registering interface after that. Fixes: f1ee87fe55c8 ("net/mlx5: Organize device list API in one place") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-07net/mlx5: Separate between E-Switch and MPFSSaeed Mahameed1-0/+2
Multi-Physical Function Switch (MPFs) is required for when multi-PF configuration is enabled to allow passing user configured unicast MAC addresses to the requesting PF. Before this patch eswitch.c used to manage the HW MPFS l2 table, E-Switch always (regardless of sriov) enabled vport(0) (NIC PF) vport's contexts update on unicast mac address list changes, to populate the PF's MPFS L2 table accordingly. In downstream patch we would like to allow compiling the driver without E-Switch functionalities, for that we move MPFS l2 table logic out of eswitch.c into its own file, and provide Kconfig flag (MLX5_MPFS) to allow compiling out MPFS for those who don't want Multi-PF support. NIC PF netdevice will now directly update MPFS l2 table via the new MPFS API. VF netdevice has no access to MPFS L2 table, so E-Switch will remain responsible of updating its MPFS l2 table on behalf of its VFs. Due to this change we also don't require enabling vport(0) (PF vport) unicast mac changes events anymore, for when SRIOV is not enabled. Which means E-Switch is now activated only on SRIOV activation, and not required otherwise. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Cc: Jes Sorensen <jsorensen@fb.com> Cc: kernel-team@fb.com
2017-08-06sctp: remove the typedef sctp_subtype_tXin Long2-15/+16
This patch is to remove the typedef sctp_subtype_t, and replace with union sctp_subtype in the places where it's using this typedef. Note that it doesn't fix many indents although it should, as sctp_disposition_t's removal would mess them up again. So better to fix them when removing sctp_disposition_t in later patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06sctp: remove the typedef sctp_event_tXin Long2-11/+7
This patch is to remove the typedef sctp_event_t, and replace with enum sctp_event in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06sctp: remove the typedef sctp_event_timeout_tXin Long2-6/+6
This patch is to remove the typedef sctp_event_timeout_t, and replace with enum sctp_event_timeout in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06sctp: remove the typedef sctp_event_other_tXin Long1-4/+4
This patch is to remove the typedef sctp_event_other_t, and replace with enum sctp_event_other in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06sctp: remove the typedef sctp_event_primitive_tXin Long1-4/+4
This patch is to remove the typedef sctp_event_primitive_t, and replace with enum sctp_event_primitive in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06sctp: remove the typedef sctp_state_tXin Long5-11/+11
This patch is to remove the typedef sctp_state_t, and replace with enum sctp_state in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06sctp: remove the typedef sctp_ierror_tXin Long1-3/+2
This patch is to remove the typedef sctp_ierror_t, and replace with enum sctp_ierror in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.