aboutsummaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2019-06-25xdp: Add tracepoint for bulk XDP_TXToshiaki Makita1-0/+29
This is introduced for admins to check what is happening on XDP_TX when bulk XDP_TX is in use, which will be first introduced in veth in next commit. v3: - Add act field to be in line with other XDP tracepoints. Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-25Merge tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtOlof Johansson2-2/+14
i.MX DT changes with new clock for 5.3: - This is a set of device tree changes with new clocks - adding clock info for i.MX8 GPIO and SNVS RTC device. * tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mq: add clock for SNVS RTC node arm64: dts: imx8mm: add clock for SNVS RTC node arm64: dts: imx8mm: add clock for GPIO node clk: imx8m: Add GIC clock dt-bindings: clock: imx8m: Add GIC clock clk: imx8mm: add SNVS clock to clock tree dt-bindings: clock: imx8mm: Add SNVS clock clk: imx8mq: add SNVS clock to clock tree dt-bindings: clock: imx8mq: Add SNVS clock clk: imx8mm: add GPIO clocks to clock tree dt-bindings: clock: imx8mm: Add GPIO clocks Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25iommu/io-pgtable: Replace IO_PGTABLE_QUIRK_NO_DMA with specific flagWill Deacon1-7/+4
IO_PGTABLE_QUIRK_NO_DMA is a bit of a misnomer, since it's really just an indication of whether or not the page-table walker for the IOMMU is coherent with the CPU caches. Since cache coherency is more than just a quirk, replace the flag with its own field in the io_pgtable_cfg structure. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-25Merge tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dtOlof Johansson1-41/+0
arm64: tegra: Device tree changes for v5.3-rc1 This contains the bulk of the Tegra changes this cycle. It has a bunch of improvements across almost all boards. These are mostly small and not too exciting additions. Most notably perhaps is the continuation of Jetson Nano support, which is now mostly on feature parity with Jetson TX1. * tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits) arm64: tegra: Enable PCIe slots in P2972-0000 board arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT arm64: tegra: Add PEX DPD states as pinctrl properties arm64: tegra: Enable ACONNECT, ADMA and AGIC arm64: tegra: Add ACONNECT, ADMA and AGIC nodes arm64: tegra: Sort device tree nodes alphabetically arm64: tegra: Fix Jetson Nano GPU regulator arm64: tegra: Update Jetson TX1 GPU regulator timings arm64: tegra: Fix AGIC register range arm64: tegra: Add INA3221 channel info for Jetson TX2 arm64: tegra: Enable PWM on Jetson Nano arm64: tegra: Enable CPU sleep on Jetson Nano arm64: tegra: Add ID EEPROMs on Jetson Nano arm64: tegra: Add ID EEPROM for Jetson TX2 Developer Kit arm64: tegra: Add ID EEPROM for Jetson TX2 module arm64: tegra: Add ID EEPROM for Jetson TX1 Developer Kit arm64: tegra: Add ID EEPROM for Jetson TX1 module arm64: tegra: Don't use architected timer for suspend on Tegra210 arm64: tegra: Mark architected timer as always on arm64: tegra: Add pin control states for I2C on Tegra186 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25regulator: core: Expose some of core functions needed by couplersDmitry Osipenko1-0/+35
Expose some of internal functions that are required for implementation of customized regulator couplers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25regulator: core: Introduce API for regulators coupling customizationDmitry Osipenko3-4/+66
Right now regulator core supports only one type of regulators coupling, the "voltage max-spread" which keeps voltages of coupled regulators in a given range from each other. A more sophisticated coupling may be required in practice, one example is the NVIDIA Tegra SoCs which besides the max-spreading have other restrictions that must be adhered. Introduce API that allow platforms to provide their own customized coupling algorithms. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25pinctrl: remove unneeded #ifdef around declarationsMasahiro Yamada4-26/+6
What is the point in surrounding the whole of declarations with ifdef like this? #ifdef CONFIG_FOO int foo(void); #endif If CONFIG_FOO is not defined, all callers of foo() will fail with implicit declaration errors since the top Makefile adds -Werror-implicit-function-declaration to KBUILD_CFLAGS. This breaks the build earlier when you are doing something wrong. That's it. Anyway, it will fail to link since the definition of foo() is not compiled. In summary, these ifdef are unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25timekeeping: Boot should be boottime for coarse ns accessorJason A. Donenfeld1-1/+1
Somewhere in all the patchsets before, this cleanup got lost. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190624091539.13512-1-Jason@zx2c4.com
2019-06-25dma-mapping: add a dma_alloc_need_uncached helperChristoph Hellwig1-0/+14
Check if we need to allocate uncached memory for a device given the allocation flags. Switch over the uncached segment check to this helper to deal with architectures that do not support the dma_cache_sync operation and thus should not returned cacheable memory for DMA_ATTR_NON_CONSISTENT allocations. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-25drm/edid: parse CEA blocks embedded in DisplayIDAndres Rodriguez1-0/+10
DisplayID blocks allow embedding of CEA blocks. The payloads are identical to traditional top level CEA extension blocks, but the header is slightly different. This change allows the CEA parser to find a CEA block inside a DisplayID block. Additionally, it adds support for parsing the embedded CTA header. No further changes are necessary due to payload parity. This change fixes audio support for the Valve Index HMD. Signed-off-by: Andres Rodriguez <andresx7@gmail.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.15 Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com
2019-06-25Merge tag 'drm/tegra/for-5.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-nextDave Airlie1-0/+2
drm/tegra: Changes for v5.3-rc1 This contains a couple of small improvements and cleanups for the Tegra DRM driver. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190621150753.19550-1-thierry.reding@gmail.com
2019-06-25ipvs: fix tinfo memory leak in start_sync_threadJulian Anastasov1-2/+4
syzkaller reports for memory leak in start_sync_thread [1] As Eric points out, kthread may start and stop before the threadfn function is called, so there is no chance the data (tinfo in our case) to be released in thread. Fix this by releasing tinfo in the controlling code instead. [1] BUG: memory leak unreferenced object 0xffff8881206bf700 (size 32): comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s) hex dump (first 32 bytes): 00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff .@|......E.!.... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline] [<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline] [<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862 [<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402 [<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] [<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115 [<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline] [<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238 [<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130 [<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078 [<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline] [<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline] [<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com Suggested-by: Eric Biggers <ebiggers@kernel.org> Fixes: 998e7a76804b ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()") Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-06-24net/mlx5: Convert mkey_table to XArrayMatthew Wilcox2-16/+2
The lock protecting the data structure does not need to be an rwlock. The only read access to the lock is in an error path, and if that's limiting your scalability, you have bigger performance problems. Eliminate mlx5_mkey_table in favour of using the xarray directly. reg_mr_callback must use GFP_ATOMIC for allocating XArray nodes as it may be called in interrupt context. This also fixes a minor bug where SRCU locking was being used on the radix tree read side, when RCU was needed too. Signed-off-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextPablo Neira Ayuso1411-9620/+2503
Resolve conflict between d2912cb15bdd ("treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500") removing the GPL disclaimer and fe03d4745675 ("Update my email address") which updates Jozsef Kadlecsik's email. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-06-24tpm: Don't duplicate events from the final event log in the TCG2 logMatthew Garrett1-0/+1
After the first call to GetEventLog() on UEFI systems using the TCG2 crypto agile log format, any further log events (other than those triggered by ExitBootServices()) will be logged in both the main log and also in the Final Events Log. While the kernel only calls GetEventLog() immediately before ExitBootServices(), we can't control whether earlier parts of the boot process have done so. This will result in log entries that exist in both logs, and so the current approach of simply appending the Final Event Log to the main log will result in events being duplicated. We can avoid this problem by looking at the size of the Final Event Log just before we call ExitBootServices() and exporting this to the main kernel. The kernel can then skip over all events that occured before ExitBootServices() and only append events that were not also logged to the main log. Signed-off-by: Matthew Garrett <mjg59@google.com> Reported-by: Joe Richey <joerichey@google.com> Suggested-by: Joe Richey <joerichey@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24tpm: Reserve the TPM final events tableMatthew Garrett2-9/+102
UEFI systems provide a boot services protocol for obtaining the TPM event log, but this is unusable after ExitBootServices() is called. Unfortunately ExitBootServices() itself triggers additional TPM events that then can't be obtained using this protocol. The platform provides a mechanism for the OS to obtain these events by recording them to a separate UEFI configuration table which the OS can then map. Unfortunately this table isn't self describing in terms of providing its length, so we need to parse the events inside it to figure out how long it is. Since the table isn't mapped at this point, we need to extend the length calculation function to be able to map the event as it goes along. (Fixes by Bartosz Szczepanek <bsz@semihalf.com>) Signed-off-by: Matthew Garrett <mjg59@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24tpm: Abstract crypto agile event size calculationsMatthew Garrett1-0/+68
We need to calculate the size of crypto agile events in multiple locations, including in the EFI boot stub. The easiest way to do this is to put it in a header file as an inline and leave a wrapper to ensure we don't end up with multiple copies of it embedded in the existing code. Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24media: v4l2-subdev: Verify arguments in v4l2_subdev_call()Janusz Krzysztofik1-0/+6
Correctness of format type (try or active) and pad number parameters passed to subdevice operation callbacks is now verified only for IOCTL calls. However, those callbacks are also used by drivers, e.g., V4L2 host interfaces. Since both subdev_do_ioctl() and drivers are using v4l2_subdev_call() macro while calling subdevice operations, move those parameter checks from subdev_do_ioctl() to v4l2_subdev_call() so we can avoid taking care of those checks inside drivers. Define a wrapper function for each operation callback in scope, then gather those wrappers in a static v4l2_subdev_ops structure so the v4l2_subdev_call() macro can find them easy if provided. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24perf/cgroups: Don't rotate events for cgroups unnecessarilyIan Rogers1-0/+5
Currently perf_rotate_context assumes that if the context's nr_events != nr_active a rotation is necessary for perf event multiplexing. With cgroups, nr_events is the total count of events for all cgroups and nr_active will not include events in a cgroup other than the current task's. This makes rotation appear necessary for cgroups when it is not. Add a perf_event_context flag that is set when rotation is necessary. Clear the flag during sched_out and set it when a flexible sched_in fails due to resources. Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20190601082722.44543-1-irogers@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24Merge tag 'v5.2-rc6' into perf/core, to refresh branchIngo Molnar435-1950/+624
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/uclamp: Extend sched_setattr() to support utilization clampingPatrick Bellasi3-10/+77
The SCHED_DEADLINE scheduling class provides an advanced and formal model to define tasks requirements that can translate into proper decisions for both task placements and frequencies selections. Other classes have a more simplified model based on the POSIX concept of priorities. Such a simple priority based model however does not allow to exploit most advanced features of the Linux scheduler like, for example, driving frequencies selection via the schedutil cpufreq governor. However, also for non SCHED_DEADLINE tasks, it's still interesting to define tasks properties to support scheduler decisions. Utilization clamping exposes to user-space a new set of per-task attributes the scheduler can use as hints about the expected/required utilization for a task. This allows to implement a "proactive" per-task frequency control policy, a more advanced policy than the current one based just on "passive" measured task utilization. For example, it's possible to boost interactive tasks (e.g. to get better performance) or cap background tasks (e.g. to be more energy/thermal efficient). Introduce a new API to set utilization clamping values for a specified task by extending sched_setattr(), a syscall which already allows to define task specific properties for different scheduling classes. A new pair of attributes allows to specify a minimum and maximum utilization the scheduler can consider for a task. Do that by validating the required clamp values before and then applying the required changes using _the_ same pattern already in use for __setscheduler(). This ensures that the task is re-enqueued with the new clamp values. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190621084217.8167-7-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/core: Allow sched_setattr() to use the current policyPatrick Bellasi1-1/+3
The sched_setattr() syscall mandates that a policy is always specified. This requires to always know which policy a task will have when attributes are configured and this makes it impossible to add more generic task attributes valid across different scheduling policies. Reading the policy before setting generic tasks attributes is racy since we cannot be sure it is not changed concurrently. Introduce the required support to change generic task attributes without affecting the current task policy. This is done by adding an attribute flag (SCHED_FLAG_KEEP_POLICY) to enforce the usage of the current policy. Add support for the SETPARAM_POLICY policy, which is already used by the sched_setparam() POSIX syscall, to the sched_setattr() non-POSIX syscall. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190621084217.8167-6-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/uclamp: Add system default clampsPatrick Bellasi2-0/+21
Tasks without a user-defined clamp value are considered not clamped and by default their utilization can have any value in the [0..SCHED_CAPACITY_SCALE] range. Tasks with a user-defined clamp value are allowed to request any value in that range, and the required clamp is unconditionally enforced. However, a "System Management Software" could be interested in limiting the range of clamp values allowed for all tasks. Add a privileged interface to define a system default configuration via: /proc/sys/kernel/sched_uclamp_util_{min,max} which works as an unconditional clamp range restriction for all tasks. With the default configuration, the full SCHED_CAPACITY_SCALE range of values is allowed for each clamp index. Otherwise, the task-specific clamp is capped by the corresponding system default value. Do that by tracking, for each task, the "effective" clamp value and bucket the task has been refcounted in at enqueue time. This allows to lazy aggregate "requested" and "system default" values at enqueue time and simplifies refcounting updates at dequeue time. The cached bucket ids are used to avoid (relatively) more expensive integer divisions every time a task is enqueued. An active flag is used to report when the "effective" value is valid and thus the task is actually refcounted in the corresponding rq's bucket. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190621084217.8167-5-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/uclamp: Add CPU's clamp buckets refcountingPatrick Bellasi3-6/+73
Utilization clamping allows to clamp the CPU's utilization within a [util_min, util_max] range, depending on the set of RUNNABLE tasks on that CPU. Each task references two "clamp buckets" defining its minimum and maximum (util_{min,max}) utilization "clamp values". A CPU's clamp bucket is active if there is at least one RUNNABLE tasks enqueued on that CPU and refcounting that bucket. When a task is {en,de}queued {on,from} a rq, the set of active clamp buckets on that CPU can change. If the set of active clamp buckets changes for a CPU a new "aggregated" clamp value is computed for that CPU. This is because each clamp bucket enforces a different utilization clamp value. Clamp values are always MAX aggregated for both util_min and util_max. This ensures that no task can affect the performance of other co-scheduled tasks which are more boosted (i.e. with higher util_min clamp) or less capped (i.e. with higher util_max clamp). A task has: task_struct::uclamp[clamp_id]::bucket_id to track the "bucket index" of the CPU's clamp bucket it refcounts while enqueued, for each clamp index (clamp_id). A runqueue has: rq::uclamp[clamp_id]::bucket[bucket_id].tasks to track how many RUNNABLE tasks on that CPU refcount each clamp bucket (bucket_id) of a clamp index (clamp_id). It also has a: rq::uclamp[clamp_id]::bucket[bucket_id].value to track the clamp value of each clamp bucket (bucket_id) of a clamp index (clamp_id). The rq::uclamp::bucket[clamp_id][] array is scanned every time it's needed to find a new MAX aggregated clamp value for a clamp_id. This operation is required only when it's dequeued the last task of a clamp bucket tracking the current MAX aggregated clamp value. In this case, the CPU is either entering IDLE or going to schedule a less boosted or more clamped task. The expected number of different clamp values configured at build time is small enough to fit the full unordered array into a single cache line, for configurations of up to 7 buckets. Add to struct rq the basic data structures required to refcount the number of RUNNABLE tasks for each clamp bucket. Add also the max aggregation required to update the rq's clamp value at each enqueue/dequeue event. Use a simple linear mapping of clamp values into clamp buckets. Pre-compute and cache bucket_id to avoid integer divisions at enqueue/dequeue time. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190621084217.8167-2-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/debug: Add sched_overutilized tracepointQais Yousef1-0/+4
The new tracepoint allows us to track the changes in overutilized status. Overutilized status is associated with EAS. It indicates that the system is in high performance state. EAS is disabled when the system is in this state since there's not much energy savings while high performance tasks are pushing the system to the limit and it's better to default to the spreading behavior of the scheduler. This tracepoint helps understanding and debugging the conditions under which this happens. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de> Link: https://lkml.kernel.org/r/20190604111459.2862-6-qais.yousef@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/debug: Add new tracepoint to track PELT at se levelQais Yousef1-0/+4
The new tracepoint allows tracking PELT signals at sched_entity level. Which is supported in CFS tasks and taskgroups only. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de> Link: https://lkml.kernel.org/r/20190604111459.2862-5-qais.yousef@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/debug: Add new tracepoints to track PELT at rq levelQais Yousef1-0/+23
The new tracepoints allow tracking PELT signals at rq level for all scheduling classes + irq. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de> Link: https://lkml.kernel.org/r/20190604111459.2862-4-qais.yousef@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/debug: Add a new sched_trace_*() helper functionsQais Yousef1-1/+15
The new functions allow modules to access internal data structures of unexported struct cfs_rq and struct rq to extract important information from the tracepoints to be introduced in later patches. While at it fix alphabetical order of struct declarations in sched.h Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de> Link: https://lkml.kernel.org/r/20190604111459.2862-3-qais.yousef@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()Vincent Guittot3-13/+5
The 'struct sched_domain *sd' parameter to arch_scale_cpu_capacity() is unused since commit: 765d0af19f5f ("sched/topology: Remove the ::smt_gain field from 'struct sched_domain'") Remove it. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: linux@armlinux.org.uk Cc: quentin.perret@arm.com Cc: rafael@kernel.org Link: https://lkml.kernel.org/r/1560783617-5827-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24Merge tag 'v5.2-rc6' into sched/core, to refresh the branchIngo Molnar422-1918/+487
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24perf/x86: Disable extended registers for non-supported PMUsKan Liang2-0/+9
The perf fuzzer caused Skylake machine to crash: [ 9680.085831] Call Trace: [ 9680.088301] <IRQ> [ 9680.090363] perf_output_sample_regs+0x43/0xa0 [ 9680.094928] perf_output_sample+0x3aa/0x7a0 [ 9680.099181] perf_event_output_forward+0x53/0x80 [ 9680.103917] __perf_event_overflow+0x52/0xf0 [ 9680.108266] ? perf_trace_run_bpf_submit+0xc0/0xc0 [ 9680.113108] perf_swevent_hrtimer+0xe2/0x150 [ 9680.117475] ? check_preempt_wakeup+0x181/0x230 [ 9680.122091] ? check_preempt_curr+0x62/0x90 [ 9680.126361] ? ttwu_do_wakeup+0x19/0x140 [ 9680.130355] ? try_to_wake_up+0x54/0x460 [ 9680.134366] ? reweight_entity+0x15b/0x1a0 [ 9680.138559] ? __queue_work+0x103/0x3f0 [ 9680.142472] ? update_dl_rq_load_avg+0x1cd/0x270 [ 9680.147194] ? timerqueue_del+0x1e/0x40 [ 9680.151092] ? __remove_hrtimer+0x35/0x70 [ 9680.155191] __hrtimer_run_queues+0x100/0x280 [ 9680.159658] hrtimer_interrupt+0x100/0x220 [ 9680.163835] smp_apic_timer_interrupt+0x6a/0x140 [ 9680.168555] apic_timer_interrupt+0xf/0x20 [ 9680.172756] </IRQ> The XMM registers can only be collected by PEBS hardware events on the platforms with PEBS baseline support, e.g. Icelake, not software/probe events. Add capabilities flag PERF_PMU_CAP_EXTENDED_REGS to indicate the PMU which support extended registers. For X86, the extended registers are XMM registers. Add has_extended_regs() to check if extended registers are applied. The generic code define the mask of extended registers as 0 if arch headers haven't overridden it. Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers") Link: https://lkml.kernel.org/r/1559081314-9714-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24ipv6: Dump route exceptions if requestedStefano Brivio2-1/+2
Since commit 2b760fcf5cfb ("ipv6: hook up exception table to store dst cache"), route exceptions reside in a separate hash table, and won't be found by walking the FIB, so they won't be dumped to userspace on a RTM_GETROUTE message. This causes 'ip -6 route list cache' and 'ip -6 route flush cache' to have no function anymore: # ip -6 route get fc00:3::1 fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 539sec mtu 1400 pref medium # ip -6 route get fc00:4::1 fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 536sec mtu 1500 pref medium # ip -6 route list cache # ip -6 route flush cache # ip -6 route get fc00:3::1 fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 520sec mtu 1400 pref medium # ip -6 route get fc00:4::1 fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 519sec mtu 1500 pref medium because iproute2 lists cached routes using RTM_GETROUTE, and flushes them by listing all the routes, and deleting them with RTM_DELROUTE one by one. If cached routes are requested using the RTM_F_CLONED flag together with strict checking, or if no strict checking is requested (and hence we can't consistently apply filters), look up exceptions in the hash table associated with the current fib6_info in rt6_dump_route(), and, if present and not expired, add them to the dump. We might be unable to dump all the entries for a given node in a single message, so keep track of how many entries were handled for the current node in fib6_walker, and skip that amount in case we start from the same partially dumped node. When a partial dump restarts, as the starting node might change when 'sernum' changes, we have no guarantee that we need to skip the same amount of in-node entries. Therefore, we need two counters, and we need to zero the in-node counter if the node from which the dump is resumed differs. Note that, with the current version of iproute2, this only fixes the 'ip -6 route list cache': on a flush command, iproute2 doesn't pass RTM_F_CLONED and, due to this inconsistency, 'ip -6 route flush cache' is still unable to fetch the routes to be flushed. This will be addressed in a patch for iproute2. To flush cached routes, a procfs entry could be introduced instead: that's how it works for IPv4. We already have a rt6_flush_exception() function ready to be wired to it. However, this would not solve the issue for listing. Versions of iproute2 and kernel tested: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 5.1.0, patched 3.18 list + + + + + + flush + + + + + + 4.4 list + + + + + + flush + + + + + + 4.9 list + + + + + + flush + + + + + + 4.14 list + + + + + + flush + + + + + + 4.15 list flush 4.19 list flush 5.0 list flush 5.1 list flush with list + + + + + + fix flush + + + + v7: - Explain usage of "skip" counters in commit message (suggested by David Ahern) v6: - Rebase onto net-next, use recently introduced nexthop walker - Make rt6_nh_dump_exceptions() a separate function (suggested by David Ahern) v5: - Use dump_routes and dump_exceptions from filter, ignore NLM_F_MATCH, update test results (flushing works with iproute2 < 5.0.0 now) v4: - Split NLM_F_MATCH and strict check handling in separate patches - Filter routes using RTM_F_CLONED: if it's not set, only return non-cached routes, and if it's set, only return cached routes: change requested by David Ahern and Martin Lau. This implies that iproute2 needs a separate patch to be able to flush IPv6 cached routes. This is not ideal because we can't fix the breakage caused by 2b760fcf5cfb entirely in kernel. However, two years have passed since then, and this makes it more tolerable v3: - More descriptive comment about expired exceptions in rt6_dump_route() - Swap return values of rt6_dump_route() (suggested by Martin Lau) - Don't zero skip_in_node in case we don't dump anything in a given pass (also suggested by Martin Lau) - Remove check on RTM_F_CLONED altogether: in the current UAPI semantic, it's just a flag to indicate the route was cloned, not to filter on routes v2: Add tracking of number of entries to be skipped in current node after a partial dump. As we restart from the same node, if not all the exceptions for a given node fit in a single message, the dump will not terminate, as suggested by Martin Lau. This is a concrete possibility, setting up a big number of exceptions for the same route actually causes the issue, suggested by David Ahern. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 2b760fcf5cfb ("ipv6: hook up exception table to store dst cache") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24ipv4: Dump route exceptions if requestedStefano Brivio1-0/+4
Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24fib_frontend, ip6_fib: Select routes or exceptions dump from RTM_F_CLONEDStefano Brivio1-0/+2
The following patches add back the ability to dump IPv4 and IPv6 exception routes, and we need to allow selection of regular routes or exceptions. Use RTM_F_CLONED as filter to decide whether to dump routes or exceptions: iproute2 passes it in dump requests (except for IPv6 cache flush requests, this will be fixed in iproute2) and this used to work as long as exceptions were stored directly in the FIB, for both IPv4 and IPv6. Caveat: if strict checking is not requested (that is, if the dump request doesn't go through ip_valid_fib_dump_req()), we can't filter on protocol, tables or route types. In this case, filtering on RTM_F_CLONED would be inconsistent: we would fix 'ip route list cache' by returning exception routes and at the same time introduce another bug in case another selector is present, e.g. on 'ip route list cache table main' we would return all exception routes, without filtering on tables. Keep this consistent by applying no filters at all, and dumping both routes and exceptions, if strict checking is not requested. iproute2 currently filters results anyway, and no unwanted results will be presented to the user. The kernel will just dump more data than needed. v7: No changes v6: Rebase onto net-next, no changes v5: New patch: add dump_routes and dump_exceptions flags in filter and simply clear the unwanted one if strict checking is enabled, don't ignore NLM_F_MATCH and don't set filter_set if NLM_F_MATCH is set. Skip filtering altogether if no strict checking is requested: selecting routes or exceptions only would be inconsistent with the fact we can't filter on tables. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspendKrzysztof Kozlowski1-0/+5
The driver supported turning off regulators in suspend only for S2MPS14 device. However this makes also sense for S2MPS11 and can reduce the power consumption during suspend to RAM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24media: marvell-ccic: provide a clock for the sensorLubomir Rintel1-2/+0
The sensor needs the MCLK clock running when it's being probed. On platforms where the sensor is instantiated from a DT (MMP2) it is going to happen asynchronously. Therefore, the current modus operandi, where the bridge driver fiddles with the sensor power and clock itself is not going to fly. As the comments wisely note, this doesn't even belong there. Luckily, the ov7670 driver is already able to control its power and reset lines, we can just drop the MMP platform glue altogether. It also requests the clock via the standard clock subsystem. Good -- let's set up a clock instance so that the sensor can ask us to enable the clock. Note that this is pretty dumb at the moment: the clock is hardwired to a particular frequency and parent. It was always the case. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: marvell-ccic: use async notifier to get the sensorLubomir Rintel1-1/+0
An instance of a sensor on DT-based MMP2 platform is always going to be created asynchronously. Let's move the manual device creation away from the core to the Cafe driver (used on OLPC XO-1, not present in DT) and set up appropriate async matches: I2C on Cafe, FWNODE on MMP (OLPC XO-1.75). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: marvell-ccic: drop unused stuffLubomir Rintel1-1/+0
Remove structure members and headers that are not actually used. Saves us from some noise in subsequent cleanup commits. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24RDMA/mlx5: Remove unused IB_WR_REG_SIG_MR codeIsrael Rukshin1-19/+0
IB_WR_REG_SIG_MR is not needed after IB_WR_REG_MR_INTEGRITY was used. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/rw: Use IB_WR_REG_MR_INTEGRITY for PI handoverIsrael Rukshin1-9/+0
Replace the old signature handover API with the new one. The new API simplifes PI handover code complexity for ULPs and improve performance. For RW API it will reduce the maximum number of work requests per task and the need of dealing with multiple MRs (and their registrations and invalidations) per task. All the mappings and registration of the data and the protection buffers is done by the LLD using a single WR and a special MR type (IB_MR_TYPE_INTEGRITY) for the PI handover operation. The setup of the tested benchmark (using iSER ULP): - 2 servers with 24 cores (1 initiator and 1 target) - ConnectX-4/ConnectX-5 adapters - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=1 and read_verify=1 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1243.3K/1182.3K 1725.1K/1680.2K 4k 571233/528835 743293/748259 32k 72388/71086 71789/93573 Using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1572.1K/1427.2K 1823.5K/1724.3K 4k 921992/916194 753772/768267 32k 75052/73960 73180/95484 There is a performance degradation when writing big block sizes. Degradation is caused by the complexity of combining multiple indirections and perform RDMA READ operation from it. This will be fixed in the following patches by reducing the indirections if possible. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Validate integrity handover device capMax Gurtovoy1-0/+1
Protect the case that a ULP tries to allocate a QP with signature enabled flag while the LLD doesn't support this feature. While we're here, also move integrity_en attribute from mlx5_qp to ib_qp as a preparation for adding new integrity API to the rw-API (that is part of ib_core module). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Rename signature qp create flag and signature device capabilityIsrael Rukshin1-2/+2
Rename IB_QP_CREATE_SIGNATURE_EN to IB_QP_CREATE_INTEGRITY_EN and IB_DEVICE_SIGNATURE_HANDOVER to IB_DEVICE_INTEGRITY_HANDOVER. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Add an integrity MR pool supportIsrael Rukshin1-1/+1
This is a preparation for adding new signature API to the rw-API. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Introduce and implement new IB_WR_REG_MR_INTEGRITY work requestMax Gurtovoy2-1/+3
This new WR will be used to perform PI (protection information) handover using the new API. Using the new API, the user will post a single WR that will internally perform all the needed actions to complete PI operation. This new WR will use a memory region that was allocated as IB_MR_TYPE_INTEGRITY and was mapped using ib_map_mr_sg_pi to perform the registration. In the old API, in order to perform a signature handover operation, each ULP should perform the following: 1. Map and register the data buffers. 2. Map and register the protection buffers. 3. Post a special reg WR to configure the signature handover operation layout. 4. Invalidate the signature memory key. 5. Invalidate protection buffers memory key. 6. Invalidate data buffers memory key. In the new API, the mapping of both data and protection buffers is performed using a single call to ib_map_mr_sg_pi function. Also the registration of the buffers and the configuration of the signature operation layout is done by a single new work request called IB_WR_REG_MR_INTEGRITY. This patch implements this operation for mlx5 devices that are capable to offload data integrity generation/validation while performing the actual buffer transfer. This patch will not remove the old signature API that is used by the iSER initiator and target drivers. This will be done in the future. In the internal implementation, for each IB_WR_REG_MR_INTEGRITY work request, we are using a single UMR operation to register both data and protection buffers using KLM's. Afterwards, another UMR operation will describe the strided block format. These will be followed by 2 SET_PSV operations to set the memory/wire domains initial signature parameters passed by the user. In the end of the whole transaction, only the signature memory key (the one that exposed for the RDMA operation) will be invalidated. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Add attr for max number page list length for PI operationMax Gurtovoy1-0/+1
PI offload (protection information) is a feature that each RDMA provider can implement differently. Thus, introduce new device attribute to define the maximal length of the page list for PI fast registration operation. For example, mlx5 driver uses a single internal MR to map both data and protection SGL's, so it's equal to max_fast_reg_page_list_len / 2. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Add signature attrs element for ib_mr structureMax Gurtovoy2-1/+3
This element will describe the needed characteristics for the signature operation per signature enabled memory region (type IB_MR_TYPE_INTEGRITY). Also add meta_length attribute to ib_sig_attrs structure for saving the mapped metadata length (needed for the new API implementation). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce ib_map_mr_sg_pi to map data/protection sgl'sMax Gurtovoy1-0/+9
This function will map the previously dma mapped SG lists for PI (protection information) and data to an appropriate memory region for future registration. The given MR must be allocated as IB_MR_TYPE_INTEGRITY. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce IB_MR_TYPE_INTEGRITY and ib_alloc_mr_integrity APIIsrael Rukshin1-0/+10
This is a preparation for signature verbs API re-design. In the new design a single MR with IB_MR_TYPE_INTEGRITY type will be used to perform the needed mapping for data integrity operations. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Save the MR type in the ib_mr structureMax Gurtovoy1-0/+10
This is a preparation for the signature verbs API change. This change is needed since the MR type will define, in the upcoming patches, the need for allocating internal resources in LLD for signature handover related operations. It will also help to make sure that signature related functions are called with an appropriate MR type and fail otherwise. Also introduce new mr types IB_MR_TYPE_USER, IB_MR_TYPE_DMA and IB_MR_TYPE_DM for correctness. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce new header file for signature operationsMax Gurtovoy2-111/+121
Ease the exhausted ib_verbs.h file and make the code more readable. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.