aboutsummaryrefslogtreecommitdiffstats
path: root/include (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-06-27nfp: flower: add GRE decap classification supportPieter Jansen van Vuuren3-18/+124
Extend the existing tunnel matching support to include GRE decap classification. Specifically matching existing tunnel fields for NVGRE (GRE with protocol field set to TEB). Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27nfp: flower: rename tunnel related functions in action offloadPieter Jansen van Vuuren2-17/+15
Previously tunnel related functions in action offload only applied to UDP tunnels. Rename these functions in preparation for new tunnel types. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27nfp: flower: add helper functions for tunnel classificationPieter Jansen van Vuuren2-24/+51
Adds IPv4 address and TTL/TOS helper functions, which is done in preparation for compiling new tunnel types. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27nfp: flower: refactor tunnel key layer calculationPieter Jansen van Vuuren1-40/+60
Refactor the key layer calculation function, in particular the tunnel key layer calculation by introducing helper functions. This is done in preparation for supporting GRE tunnel offloads. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Replace bit RMW with regmapMarek Vasut1-12/+10
Regmap provides read-modify-write function to update bitfields in registers. Replace ad-hoc read-modify-write with regmap_update_bits() where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Replace ksz9477_wait_alu_sta_ready polling with regmapMarek Vasut1-20/+12
Regmap provides polling function to poll for bits in a register. This function is another reimplementation of polling for bit being clear in a register. Replace this with regmap polling function. Moreover, inline the function parameters, as the function is never called with any other parameter values than this one. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Replace ksz9477_wait_alu_ready polling with regmapMarek Vasut1-22/+12
Regmap provides polling function to poll for bits in a register. This function is another reimplementation of polling for bit being clear in a register. Replace this with regmap polling function. Moreover, inline the function parameters, as the function is never called with any other parameter values than this one. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Replace ksz9477_wait_vlan_ctrl_ready polling with regmapMarek Vasut1-18/+8
Regmap provides polling function to poll for bits in a register. This function is another reimplementation of polling for bit being clear in a register. Replace this with regmap polling function. Moreover, inline the function parameters, as the function is never called with any other parameter values than this one. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Replace ad-hoc polling with regmapMarek Vasut2-23/+5
Regmap provides polling function to poll for bits in a register, use in instead of reimplementing it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: qca8k: introduce reset via gpio featureChristian Lamparter2-0/+17
The QCA8337(N) has a RESETn signal on Pin B42 that triggers a chip reset if the line is pulled low. The datasheet says that: "The active low duration must be greater than 10 ms". This can hopefully fix some of the issues related to pin strapping in OpenWrt for the EA8500 which suffers from detection issues after a SoC reset. Please note that the qca8k_probe() function does currently require to read the chip's revision register for identification purposes. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27dt-bindings: net: dsa: qca8k: document reset-gpios propertyChristian Lamparter1-0/+6
This patch documents the qca8k's reset-gpios property that can be used if the QCA8337N ends up in a bad state during reset. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27ipv6: Convert gateway validation to use fib6_infoDavid Ahern1-62/+56
Gateway validation does not need a dst_entry, it only needs the fib entry to validate the gateway resolution and egress device. So, convert ip6_nh_lookup_table from ip6_pol_route to fib6_table_lookup and ip6_route_check_nh to use fib6_lookup over rt6_lookup. ip6_pol_route is a call to fib6_table_lookup and if successful a call to fib6_select_path. From there the exception cache is searched for an entry or a dst_entry is created to return to the caller. The exception entry is not relevant for gateway validation, so what matters are the calls to fib6_table_lookup and then fib6_select_path. Similarly, rt6_lookup can be replaced with a call to fib6_lookup with RT6_LOOKUP_F_IFACE set in flags. Again, the exception cache search is not relevant, only the lookup with path selection. The primary difference in the lookup paths is the use of rt6_select with fib6_lookup versus rt6_device_match with rt6_lookup. When you remove complexities in the rt6_select path, e.g., 1. saddr is not set for gateway validation, so RT6_LOOKUP_F_HAS_SADDR is not relevant 2. rt6_check_neigh is not called so that removes the RT6_NUD_FAIL_DO_RR return and round-robin logic. the code paths are believed to be equivalent for the given use case - validate the gateway and optionally given the device. Furthermore, it aligns the validation with onlink code path and the lookup path actually used for rx and tx. Adjust the users, ip6_route_check_nh_onlink and ip6_route_check_nh to handle a fib6_info vs a rt6_info when performing validation checks. Existing selftests fib-onlink-tests.sh and fib_tests.sh are used to verify the changes. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Implement is_static for FDB entries on E/TVladimir Oltean1-0/+15
The first generation switches don't tell us through the dynamic config interface whether the dumped FDB entries are static or not (the LOCKEDS bit from P/Q/R/S). However, now that we're keeping a mirror of all 'bridge fdb' commands in the static config, this is an opportunity to compare a dumped FDB entry to the driver's private database. After all, what makes an entry static is that *we* added it. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Use correct dsa_8021q VIDs for FDB commandsVladimir Oltean1-26/+56
A FDB entry means that "frames that match this VID and DMAC must be forwarded to this port". In the case of dsa_8021q however, the VID is not a single one (and neither two, as my previous patch assumed). The VID can be set either by the CPU port (1 tx_vid), or by any of the other front-panel port (n-1 rx_vid's). Fixes: 93647594d8f5 ("net: dsa: sja1105: Hide the dsa_8021q VLANs from the bridge fdb command") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Populate is_static for FDB entries on P/Q/R/SVladimir Oltean3-5/+62
The reason why this wasn't tackled earlier is that I had hoped I understood the user manual wrong. But unfortunately hacks are required in order to retrieve the static/dynamic nature of FDB entries on SJA1105 P/Q/R/S, since this info is stored in the writeback buffer of the dynamic config command. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Add a high-level overview of the dynamic config interfaceVladimir Oltean1-0/+92
When trying to add support for LOCKEDS (static FDB entries) on SJA1105 P/Q/R/S, at first I didn't remember how the abstraction I created worked, and actually thought it works by mistake. To avoid other people staring at the code and not making much sense out of it, add some comments at the top of the file. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Back up static FDB entries in kernel memoryVladimir Oltean1-12/+99
After commit 8456721dd4ec ("net: dsa: sja1105: Add support for configuring address ageing time"), we started to reset the switch rather often (each time the bridge core changes the ageing time on a switch port). The unfortunate reality is that SJA1105 doesn't have any {cold, warm, whatever} reset mode in which it accepts a new configuration stream without flushing the FDB. Instead, in its world, the FDB *is* an optional part of the static configuration. So we play its game, and do what we also do for VLANs: for each 'bridge fdb' command, we add the FDB entry through the dynamic interface, and we append the in-kernel static config memory with info that we're going to use later, when the next reset command is going to be issued. The result is that 'bridge fdb' commands are now persistent (dynamically learned entries are lost, but that's ok). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Make P/Q/R/S learn MAC addressesVladimir Oltean3-0/+8
At the end of the commit 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") message, I said that: At the moment only FDB entries installed statically through 'bridge fdb' are visible in the dump callback - the dynamically learned ones are still under investigation. It looks like the reason why they were not visible in 'bridge fdb' was that they were never learned - always flooded. SJA1105 P/Q/R/S manual says about the MAXADDRP[port] field: Specify the maximum number of MAC address dynamically learned from the respective port. It is used to limit the number of learned MAC addresses per port. It looks like not providing a value in the static config (aka providing zeroes) is enough for it to not store the learned addresses in the FDB. For now we divide the 1024 entry FDB "equally" amongst the 5 ports. This may be revisited if the situation calls for that - for now I'm happy that learning works. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Actually implement the P/Q/R/S FDB bitsVladimir Oltean1-0/+5
In commit 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series"), these bits were set in the static config, but apparently they did not do anything. The reason is that the packing accessors for them were part of a patch I forgot to send. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Make vid 1 the default pvidVladimir Oltean1-9/+4
In SJA1105 there is no concept of 'default values' per se, everything needs to be driver-supplied through the static configuration tables. The issue is that the hardware manual says that 'at least the default untagging VLAN' is mandatory to be provided through the static config. But VLAN 0 isn't a very good initial pvid - its use is reserved for priority-tagged frames, and the layers of the stack that care about those already make sure that this VLAN is installed, as can be seen in the message below: 8021q: adding VLAN 0 to HW filter on device swp2 So change the pvid provided through the static configuration to 1, which matches the bridge core's defaults. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Cancel PTP delayed work on unregisterVladimir Oltean1-0/+1
Currently when the driver unloads and PTP is enabled, the delayed work that prevents the timecounter from expiring becomes a ticking time bomb. The kernel will schedule the work thread within 60 seconds of driver removal, but the work handler is no longer there, leading to this strange and inconclusive stack trace: [ 64.473112] Unable to handle kernel paging request at virtual address 79746970 [ 64.480340] pgd = 008c4af9 [ 64.483042] [79746970] *pgd=00000000 [ 64.486620] Internal error: Oops: 80000005 [#1] SMP ARM [ 64.491820] Modules linked in: [ 64.494871] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0-rc5-01634-ge3a2773ba9e5 #1246 [ 64.503007] Hardware name: Freescale LS1021A [ 64.507259] PC is at 0x79746970 [ 64.510393] LR is at call_timer_fn+0x3c/0x18c [ 64.514729] pc : [<79746970>] lr : [<c03bd734>] psr: 60010113 [ 64.520965] sp : c1901de0 ip : 00000000 fp : c1903080 [ 64.526163] r10: c1901e38 r9 : ffffe000 r8 : c19064ac [ 64.531363] r7 : 79746972 r6 : e98dd260 r5 : 00000100 r4 : c1a9e4a0 [ 64.537859] r3 : c1900000 r2 : ffffa400 r1 : 79746972 r0 : e98dd260 [ 64.544359] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 64.551460] Control: 10c5387d Table: a8a2806a DAC: 00000051 [ 64.557176] Process swapper/0 (pid: 0, stack limit = 0x1ddb27f0) [ 64.563147] Stack: (0xc1901de0 to 0xc1902000) [ 64.567481] 1de0: eb6a4918 3d60d7c3 c1a9e554 e98dd260 eb6a34c0 c1a9e4a0 ffffa400 c19064ac [ 64.575616] 1e00: ffffe000 c03bd95c c1901e34 c1901e34 eb6a34c0 c1901e30 c1903d00 c186f4c0 [ 64.583751] 1e20: c1906488 29e34000 c1903080 c03bdca4 00000000 eaa6f218 00000000 eb6a45c0 [ 64.591886] 1e40: eb6a45c0 20010193 00000003 c03c0a68 20010193 3f7231be c1903084 00000002 [ 64.600022] 1e60: 00000082 00000001 ffffe000 c1a9e0a4 00000100 c0302298 02b64722 0000000f [ 64.608157] 1e80: c186b3c8 c1877540 c19064ac 0000000a c186b350 ffffa401 c1903d00 c1107348 [ 64.616292] 1ea0: 00200102 c0d87a14 ea823c00 ffffe000 00000012 00000000 00000000 ea810800 [ 64.624427] 1ec0: f0803000 c1876ba8 00000000 c034c784 c18774b8 c039fb50 c1906c90 c1978aac [ 64.632562] 1ee0: f080200c f0802000 c1901f10 c0709ca8 c03091a0 60010013 ffffffff c1901f44 [ 64.640697] 1f00: 00000000 c1900000 c1876ba8 c0301a8c 00000000 000070a0 eb6ac1a0 c031da60 [ 64.648832] 1f20: ffffe000 c19064ac c19064f0 00000001 00000000 c1906488 c1876ba8 00000000 [ 64.656967] 1f40: ffffffff c1901f60 c030919c c03091a0 60010013 ffffffff 00000051 00000000 [ 64.665102] 1f60: ffffe000 c0376aa4 c1a9da37 ffffffff 00000037 3f7231be c1ab20c0 000000cc [ 64.673238] 1f80: c1906488 c1906480 ffffffff 00000037 c1ab20c0 c1ab20c0 00000001 c0376e1c [ 64.681373] 1fa0: c1ab2118 c1700ea8 ffffffff ffffffff 00000000 c1700754 c17dfa40 ebfffd80 [ 64.689509] 1fc0: 00000000 c17dfa40 3f7733be 00000000 00000000 c1700330 00000051 10c0387d [ 64.697644] 1fe0: 00000000 8f000000 410fc075 10c5387d 00000000 00000000 00000000 00000000 [ 64.705788] [<c03bd734>] (call_timer_fn) from [<c03bd95c>] (expire_timers+0xd8/0x144) [ 64.713579] [<c03bd95c>] (expire_timers) from [<c03bdca4>] (run_timer_softirq+0xe4/0x1dc) [ 64.721716] [<c03bdca4>] (run_timer_softirq) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 64.729854] [<c0302298>] (__do_softirq) from [<c034c784>] (irq_exit+0xbc/0xd8) [ 64.737040] [<c034c784>] (irq_exit) from [<c039fb50>] (__handle_domain_irq+0x60/0xb4) [ 64.744833] [<c039fb50>] (__handle_domain_irq) from [<c0709ca8>] (gic_handle_irq+0x58/0x9c) [ 64.753143] [<c0709ca8>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 64.760583] Exception stack(0xc1901f10 to 0xc1901f58) [ 64.765605] 1f00: 00000000 000070a0 eb6ac1a0 c031da60 [ 64.773740] 1f20: ffffe000 c19064ac c19064f0 00000001 00000000 c1906488 c1876ba8 00000000 [ 64.781873] 1f40: ffffffff c1901f60 c030919c c03091a0 60010013 ffffffff [ 64.788456] [<c0301a8c>] (__irq_svc) from [<c03091a0>] (arch_cpu_idle+0x38/0x3c) [ 64.795816] [<c03091a0>] (arch_cpu_idle) from [<c0376aa4>] (do_idle+0x1bc/0x298) [ 64.803175] [<c0376aa4>] (do_idle) from [<c0376e1c>] (cpu_startup_entry+0x18/0x1c) [ 64.810707] [<c0376e1c>] (cpu_startup_entry) from [<c1700ea8>] (start_kernel+0x480/0x4ac) [ 64.818839] Code: bad PC value [ 64.821890] ---[ end trace e226ed97b1c584cd ]--- [ 64.826482] Kernel panic - not syncing: Fatal exception in interrupt [ 64.832807] CPU1: stopping [ 64.835501] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 5.2.0-rc5-01634-ge3a2773ba9e5 #1246 [ 64.845013] Hardware name: Freescale LS1021A [ 64.849266] [<c0312394>] (unwind_backtrace) from [<c030cc74>] (show_stack+0x10/0x14) [ 64.856972] [<c030cc74>] (show_stack) from [<c0ff4138>] (dump_stack+0xb4/0xc8) [ 64.864159] [<c0ff4138>] (dump_stack) from [<c0310854>] (handle_IPI+0x3bc/0x3dc) [ 64.871519] [<c0310854>] (handle_IPI) from [<c0709ce8>] (gic_handle_irq+0x98/0x9c) [ 64.879050] [<c0709ce8>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 64.886489] Exception stack(0xea8cbf60 to 0xea8cbfa8) [ 64.891514] bf60: 00000000 0000307c eb6c11a0 c031da60 ffffe000 c19064ac c19064f0 00000002 [ 64.899649] bf80: 00000000 c1906488 c1876ba8 00000000 00000000 ea8cbfb0 c030919c c03091a0 [ 64.907780] bfa0: 600d0013 ffffffff [ 64.911250] [<c0301a8c>] (__irq_svc) from [<c03091a0>] (arch_cpu_idle+0x38/0x3c) [ 64.918609] [<c03091a0>] (arch_cpu_idle) from [<c0376aa4>] (do_idle+0x1bc/0x298) [ 64.925967] [<c0376aa4>] (do_idle) from [<c0376e1c>] (cpu_startup_entry+0x18/0x1c) [ 64.933496] [<c0376e1c>] (cpu_startup_entry) from [<803025cc>] (0x803025cc) [ 64.940422] Rebooting in 3 seconds.. In this case, what happened is that the DSA driver failed to probe at boot time due to a PHY issue during phylink_connect_phy: [ 2.245607] fsl-gianfar soc:ethernet@2d90000 eth2: error -19 setting up slave phy [ 2.258051] sja1105 spi0.1: failed to create slave for port 0.0 Fixes: bb77f36ac21d ("net: dsa: sja1105: Add support for the PTP clock") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Build PTP support in main DSA driverVladimir Oltean4-18/+1
As Arnd Bergmann pointed out in commit 78fe8a28fb96 ("net: dsa: sja1105: fix ptp link error"), there is no point in having PTP support as a separate loadable kernel module. So remove the exported symbols and make sja1105.ko contain PTP support or not based on CONFIG_NET_DSA_SJA1105_PTP. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Replace ad-hoc bit manipulation with regmapMarek Vasut1-40/+6
Regmap provides bit manipulation functions to set/clear bits, use those insted of reimplementing them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Factor out regmap config generation into common headerMarek Vasut2-26/+35
The regmap config tables are rather similar for various generations of the KSZ8xxx/KSZ9xxx switches. Introduce a macro which allows generating those tables without duplication. Note that $regalign parameter is not used right now, but will be used in KSZ87xx series switches. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Dispose of ksz_io_opsMarek Vasut4-112/+17
Since the driver now uses regmap , get rid of ad-hoc ksz_io_ops abstraction, which no longer has any meaning. Moreover, since regmap has it's own locking, get rid of the register access mutex. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Initial SPI regmap supportMarek Vasut3-66/+52
Add basic SPI regmap support into the driver. Previous patches unconver that ksz_spi_write() is always ever called with len = 1, 2 or 4. We can thus drop the if (len > SPI_TX_BUF_LEN) check and we can also drop the allocation of the txbuf which is part of the driver data and wastes 256 bytes for no reason. Regmap covers the whole thing now. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Factor out register access opcode generationMarek Vasut1-10/+12
Factor out the code which sends out the register read/write opcodes to the switch, since the code differs in single bit between read and write. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Use PORT_CTRL_ADDR() instead of indirect function callMarek Vasut1-1/+1
The indirect function call to dev->dev_ops->get_port_addr() is expensive especially if called for every single register access, and only returns the value of PORT_CTRL_ADDR() macro. Use PORT_CTRL_ADDR() macro directly instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Move ksz_cfg and ksz_port_cfg to ksz9477.cMarek Vasut2-29/+29
These functions are only used by the KSZ9477 code, move them from the header into that code. Note that these functions will be soon replaced by regmap equivalents. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Inline ksz_spi.hMarek Vasut2-60/+42
The functions in the header file are static, and the header file is included from single C file, just inline the code into the C file. The bonus is that it's easier to spot further content to clean up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Remove ksz_{get,set}()Marek Vasut4-38/+0
These functions and callbacks are never used, remove them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Remove ksz_{read,write}24()Marek Vasut3-49/+0
These functions and callbacks are never used, remove them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: implement vlan offload configurationIgor Russkikh1-7/+27
set_features should update flags and reinit hardware if vlan offload settings were changed. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: vlan offloads logic in datapathIgor Russkikh3-19/+60
Update datapath by adding logic related to hardware assisted vlan strip/insert behaviour. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: adding fields and device features for vlan offloadIgor Russkikh5-10/+22
Updating features and vlan_features with vlan HW offload. Added vlan_tag fields to rx/tx ring_buff to track vlan related data. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: added vlan offload related macros and functionsIgor Russkikh4-0/+46
Register declaration macros required to work with vlan offload mode. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: make all files GPL-2.0-onlyIgor Russkikh4-4/+4
It was noticed some files had -or-later, however overall driver has -only license. Clean this up. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27maintainers: declare aquantia atlantic driver maintenanceIgor Russkikh1-0/+9
Aquantia is resposible now for all new features and bugfixes. Reflect that in MAINTAINERS. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>