| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, when the writeback code detects a server reboot, it redirties
any pages that were not committed to disk, and it sets the flag
NFS_CONTEXT_RESEND_WRITES in the nfs_open_context of the file descriptor
that dirtied the file. While this allows the file descriptor in question
to redrive its own writes, it violates the fsync() requirement that we
should be synchronising all writes to disk.
While the problem is infrequent, we do see corner cases where an
untimely server reboot causes the fsync() call to abandon its attempt to
sync data to disk and causing data corruption issues due to missed error
conditions or similar.
In order to tighted up the client's ability to deal with this situation
without introducing livelocks, add a counter that records the number of
times pages are redirtied due to a server reboot-like condition, and use
that in fsync() to redrive the sync to disk.
Fixes: 2197e9b06c22 ("NFS: Fix up fsync() when the server rebooted")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Don't leak request pointers, but use the "device:inode" labelling that
is used by all the other trace points. Furthermore, replace use of page
indexes with an offset, again in order to align behaviour with other
NFS trace points.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
NFS unlink() (and rename over existing target) must determine if the
file is open, and must perform a "silly rename" instead of an unlink (or
before rename) if it is. Otherwise the client might hold a file open
which has been removed on the server.
Consequently if it determines that the file isn't open, it must block
any subsequent opens until the unlink/rename has been completed on the
server.
This is currently achieved by unhashing the dentry. This forces any
open attempt to the slow-path for lookup which will block on i_rwsem on
the directory until the unlink/rename completes. A future patch will
change the VFS to only get a shared lock on i_rwsem for unlink, so this
will no longer work.
Instead we introduce an explicit interlock. A special value is stored
in dentry->d_fsdata while the unlink/rename is running and
->d_revalidate blocks while that value is present. When ->d_revalidate
unblocks, the dentry will be invalid. This closes the race
without requiring exclusion on i_rwsem.
d_fsdata is already used in two different ways.
1/ an IS_ROOT directory dentry might have a "devname" stored in
d_fsdata. Such a dentry doesn't have a name and so cannot be the
target of unlink or rename. For safety we check if an old devname
is still stored, and remove it if it is.
2/ a dentry with DCACHE_NFSFS_RENAMED set will have a 'struct
nfs_unlinkdata' stored in d_fsdata. While this is set maydelete()
will fail, so an unlink or rename will never proceed on such
a dentry.
Neither of these can be in effect when a dentry is the target of unlink
or rename. So we can expect d_fsdata to be NULL, and store a special
value ((void*)1) which is given the name NFS_FSDATA_BLOCKED to indicate
that any lookup will be blocked.
The d_count() is incremented under d_lock() when a lookup finds the
dentry, so we check d_count() is low, and set NFS_FSDATA_BLOCKED under
the same lock to avoid any races.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If a request is re-encoded and then retransmitted, we need to make sure
that we also re-encode the bvec, in case the page lists have changed.
Fixes: ff053dbbaffe ("SUNRPC: Move the call to xprt_send_pagedata() out of xprt_sock_sendmsg()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
For only offline transports, attempt to check connectivity via
a NULL call and, if that succeeds, call a provided session trunking
detection function.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Make xprt_iter_rewind callable outside of xprtmultipath.c
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Expose a function that allows a removal of xprt from the rpc_clnt.
When called from NFS that's running a trunked transport then don't
decrement the active transport counter.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When we are adding a transport to a xprt_switch that's already on
the list but has been marked OFFLINE, then make the state ONLINE
since it's been tested now.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Create a new iterator helper that will go thru the all the transports
in the switch and return transports that are marked OFFLINE.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Iterate thru available transports in the xprt_switch for all
trunkable transports offline and possibly remote them as well.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Re-arrange the code that make offline transport and delete transport
callable functions.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
These functions are no longer needed now that the NFS client places data
and hole segments directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This will be used during READ_PLUS decoding for handling HOLE segments.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
We need to do this step during READ_PLUS decoding so that we know pages
are the right length and any extra data has been preserved in the tail.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
I do this by creating an xdr subsegment for the range we will be
operating over. This lets me shift data to the correct place without
potentially overwriting anything already there.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently, we try to determine whether to issue a commit based on
nfs_write_need_commit which looks at the current verifier. In the case
where we got a short write and then tried to follow it up with one that
failed, the verifier can't be trusted.
What we really want to know is whether the pgio request had any
successful writes that came back as UNSTABLE. Add a new flag to the pgio
request, and use that to indicate that we've had a successful unstable
write. Only issue a commit if that flag is set.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Move the field 'tk_rpc_status' so that we eliminate a 4 byte hole in the
structure.
For x86_64, this shrinks the size of the struct by 8 bytes.
'pahole' output before the change:
/* size: 232, cachelines: 4, members: 27 */
/* sum members: 222, holes: 1, sum holes: 4 */
/* sum bitfield members: 8 bits (1 bytes) */
/* padding: 5 */
/* last cacheline: 40 bytes */
'pahole' output after the change:
/* size: 224, cachelines: 4, members: 27 */
/* padding: 1 */
/* last cacheline: 32 bytes */
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull char/misc driver fixes from Greg KH:
"Here are four small char/misc driver fixes for 5.19-rc6 to resolve
some reported issues. They only affect two drivers:
- rtsx_usb: fix for of-reported DMA warning error, the driver was
handling memory buffers in odd ways, it has now been fixed up to be
much simpler and correct by Shuah.
- at25 eeprom driver bugfix for reported problem
All of these have been in linux-next for a week with no reported
problems"
* tag 'char-misc-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx_usb: set return value in rsp_buf alloc err path
misc: rtsx_usb: use separate command and response buffers
misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transfer
eeprom: at25: Rework buggy read splitting
|
|
Pull fscache fixes from David Howells:
- Fix a check in fscache_wait_on_volume_collision() in which the
polarity is reversed. It should complain if a volume is still marked
acquisition-pending after 20s, but instead complains if the mark has
been cleared (ie. the condition has cleared).
Also switch an open-coded test of the ACQUIRE_PENDING volume flag to
use the helper function for consistency.
- Not a fix per se, but neaten the code by using a helper to check for
the DROPPED state.
- Fix cachefiles's support for erofs to only flush requests associated
with a released control file, not all requests.
- Fix a race between one process invalidating an object in the cache
and another process trying to look it up.
* tag 'fscache-fixes-20220708' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Fix invalidation/lookup race
cachefiles: narrow the scope of flushed requests when releasing fd
fscache: Introduce fscache_cookie_is_dropped()
fscache: Fix if condition in fscache_wait_on_volume_collision()
|
|
Pull ACPI fixes from Rafael Wysocki:
"These fix two recent regressions related to CPPC support.
Specifics:
- Prevent _CPC from being used if the platform firmware does not
confirm CPPC v2 support via _OSC (Mario Limonciello)
- Allow systems with X86_FEATURE_CPPC set to use _CPC even if CPPC
support cannot be agreed on via _OSC (Mario Limonciello)"
* tag 'acpi-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported
ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked
|
|
Pull power management fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in a devfreq driver and a runtime
PM framework issue that may cause a supplier device to be suspended
before its consumer.
Specifics:
- Fix NULL pointer dereference related to printing a diagnostic
message in the exynos-bus devfreq driver (Christian Marangi)
- Fix race condition in the runtime PM framework which in some cases
may cause a supplier device to be suspended when its consumer is
still active (Rafael Wysocki)"
* tag 'pm-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: exynos-bus: Fix NULL pointer dereference
PM: runtime: Fix supplier device management during consumer probe
PM: runtime: Redefine pm_runtime_release_supplier()
|
|
Pull cxl fixes from Vishal Verma:
- Update MAINTAINERS for Ben's email
- Fix cleanup of port devices on failure to probe driver
- Fix endianness in get/set LSA mailbox command structures
- Fix memregion_free() fallback definition
- Fix missing variable payload checks in CXL cmd size validation
* tag 'cxl-fixes-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/mbox: Fix missing variable payload checks in cmd size validation
memregion: Fix memregion_free() fallback definition
cxl/mbox: Use __le32 in get,set_lsa mailbox structures
cxl/core: Use is_endpoint_decoder
cxl: Fix cleanup of port devices on failure to probe driver.
MAINTAINERS: Update Ben's email address
|
|
Pull iommu fixes from Joerg Roedel:
- fix device setup failures in the Intel VT-d driver when the PASID
table is shared
- fix Intel VT-d device hot-add failure due to wrong device notifier
order
- remove the old IOMMU mailing list from the MAINTAINERS file now that
it has been retired
* tag 'iommu-fixes-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: Remove iommu@lists.linux-foundation.org
iommu/vt-d: Fix RID2PASID setup/teardown failure
iommu/vt-d: Fix PCI bus rescan device hot add
|
|
Merge a runtime PM framework cleanup and fix related to device links.
* pm-core:
PM: runtime: Fix supplier device management during consumer probe
PM: runtime: Redefine pm_runtime_release_supplier()
|
|
Pull block fixes from Jens Axboe:
"NVMe pull request with another id quirk addition, and a tracing fix"
* tag 'block-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
nvme: use struct group for generic command dwords
nvme-pci: phison e16 has bogus namespace ids
|
|
Pull io_uring tweak from Jens Axboe:
"Just a minor tweak to an addition made in this release cycle: padding
a 32-bit value that's in a 64-bit union to avoid any potential
funkiness from that"
* tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
io_uring: explicit sqe padding for ioctl commands
|
|
Pull fbdev fixes from Helge Deller:
- fbcon now prevents switching to screen resolutions which are smaller
than the font size, and prevents enabling a font which is bigger than
the current screen resolution. This fixes vmalloc-out-of-bounds
accesses found by KASAN.
- Guiling Deng fixed a bug where the centered fbdev logo wasn't
displayed correctly if the screen size matched the logo size.
- Hsin-Yi Wang provided a patch to include errno.h to fix build when
CONFIG_OF isn't enabled.
* tag 'for-5.19/fbdev-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Use fbcon_info_from_console() in fbcon_modechange_possible()
fbmem: Check virtual screen sizes in fb_set_var()
fbcon: Prevent that screen size is smaller than font size
fbcon: Disallow setting font bigger than screen size
video: of_display_timing.h: include errno.h
fbdev: fbmem: Fix logo center image dx issue
|
|
32 bit sqe->cmd_op is an union with 64 bit values. It's always a good
idea to do padding explicitly. Also zero check it in prep, so it can be
used in the future if needed without compatibility concerns.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e6b95a05e970af79000435166185e85b196b2ba2.1657202417.git.asml.silence@gmail.com
[axboe: turn bitwise OR into logical variant]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter, can, and bluetooth.
Current release - regressions:
- bluetooth: fix deadlock on hci_power_on_sync
Previous releases - regressions:
- sched: act_police: allow 'continue' action offload
- eth: usbnet: fix memory leak in error case
- eth: ibmvnic: properly dispose of all skbs during a failover
Previous releases - always broken:
- bpf:
- fix insufficient bounds propagation from
adjust_scalar_min_max_vals
- clear page contiguity bit when unmapping pool
- netfilter: nft_set_pipapo: release elements in clone from
abort path
- mptcp: netlink: issue MP_PRIO signals from userspace PMs
- can:
- rcar_canfd: fix data transmission failed on R-Car V3U
- gs_usb: gs_usb_open/close(): fix memory leak
Misc:
- add Wenjia as SMC maintainer"
* tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
wireguard: Kconfig: select CRYPTO_CHACHA_S390
crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations
wireguard: selftests: use microvm on x86
wireguard: selftests: always call kernel makefile
wireguard: selftests: use virt machine on m68k
wireguard: selftests: set fake real time in init
r8169: fix accessing unset transport header
net: rose: fix UAF bug caused by rose_t0timer_expiry
usbnet: fix memory leak in error case
Revert "tls: rx: move counting TlsDecryptErrors for sync"
mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy
mptcp: fix local endpoint accounting
selftests: mptcp: userspace PM support for MP_PRIO signals
mptcp: netlink: issue MP_PRIO signals from userspace PMs
mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
mptcp: Avoid acquiring PM lock for subflow priority changes
mptcp: fix locking in mptcp_nl_cmd_sf_destroy()
net/mlx5e: Fix matchall police parameters validation
net/sched: act_police: allow 'continue' action offload
net: lan966x: hardcode the number of external ports
...
|
|
We need to prevent that users configure a screen size which is smaller than the
currently selected font size. Otherwise rendering chars on the screen will
access memory outside the graphics memory region.
This patch adds a new function fbcon_modechange_possible() which
implements this check and which later may be extended with other checks
if necessary. The new function is called from the FBIOPUT_VSCREENINFO
ioctl handler in fbmem.c, which will return -EINVAL if userspace asked
for a too small screen size.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
|
|
This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull sound fixes from Takashi Iwai:
"This became largish as it includes the pending ASoC fixes.
Almost all changes are device-specific small fixes, while many of them
are coverage for mixer issues that were detected by selftest. In
addition, usual suspects for HD/USB-audio are there"
* tag 'sound-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (43 commits)
ALSA: cs46xx: Fix missing snd_card_free() call at probe error
ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
ALSA: usb-audio: Add quirk for Fiero SC-01
ALSA: hda/realtek: Add quirk for Clevo L140PU
ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices
ASoC: madera: Fix event generation for rate controls
ASoC: madera: Fix event generation for OUT1 demux
ASoC: cs47l15: Fix event generation for low power mux control
ASoC: cs35l41: Add ASP TX3/4 source to register patch
ASoC: dapm: Initialise kcontrol data for mux/demux controls
ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
ASoC: cs35l41: Correct some control names
ASoC: wm5110: Fix DRE control
ASoC: wm_adsp: Fix event for preloader
MAINTAINERS: update ASoC Qualcomm maintainer email-id
ASoC: rockchip: i2s: switch BCLK to GPIO
ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states
ASoC: SOF: pm: add definitions for S4 and S5 states
ASoC: SOF: pm: add explicit behavior for ACPI S1 and S2
ASoC: SOF: Intel: hda: Fix compressed stream position tracking
...
|
|
If CONFIG_OF is not enabled, default of_get_display_timing() returns an
errno, so include the header.
Fixes: 422b67e0b31a ("videomode: provide dummy inline functions for !CONFIG_OF")
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even
though it was supported by mlx5 matchall offload implementation, which
didn't verify the action type but instead assumed that any single police
action attached to matchall classifier is a 'continue' action. Lack of
action type check made it non-obvious what mlx5 matchall implementation
actually supports and caused implementers and reviewers of referenced
commits to disallow it as a part of improved validation code.
Fixes: b8cd5831c61c ("net: flow_offload: add tc police action parameters")
Fixes: b50e462bc22d ("net/sched: act_police: Add extack messages for offload failure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IOMMU driver shares the pasid table for PCI alias devices. When the
RID2PASID entry of the shared pasid table has been filled by the first
device, the subsequent device will encounter the "DMAR: Setup RID2PASID
failed" failure as the pasid entry has already been marked as present.
As the result, the IOMMU probing process will be aborted.
On the contrary, when any alias device is hot-removed from the system,
for example, by writing to /sys/bus/pci/devices/.../remove, the shared
RID2PASID will be cleared without any notifications to other devices.
As the result, any DMAs from those rest devices are blocked.
Sharing pasid table among PCI alias devices could save two memory pages
for devices underneath the PCIe-to-PCI bridges. Anyway, considering that
those devices are rare on modern platforms that support VT-d in scalable
mode and the saved memory is negligible, it's reasonable to remove this
part of immature code to make the driver feasible and stable.
Fixes: ef848b7e5a6a0 ("iommu/vt-d: Setup pasid entry for RID2PASID support")
Reported-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reported-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220623065720.727849-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220625133430.2200315-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and
when CPPC_LIB is supported") added support for claiming to
support CPPC in _OSC on non-Intel platforms.
This unfortunately caused a regression on a vartiety of AMD
platforms in the field because a number of AMD platforms don't set
the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support.
As these AMD platforms already claim CPPC support via a dedicated
MSR from `X86_FEATURE_CPPC`, use this enable this feature rather
than requiring the `_OSC` on platforms with a dedicated MSR.
If there is additional breakage on the shared memory designs also
missing this _OSC, additional follow up changes may be needed.
Fixes: 72f2ecb7ece7 ("Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Reported-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Previously the kernel used to ignore whether the firmware masked CPPC
or CPPCv2 and would just pretend that it worked.
When support for the USB4 bit in _OSC was introduced from commit
9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear")
the kernel began to look at the return when the query bit was clear.
This caused regressions that were misdiagnosed and attempted to be solved
as part of commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities
to the _OSC regardless of the query flag""). This caused a different
regression where non-Intel systems weren't able to negotiate _OSC
properly.
This was reverted in commit 2ca8e6285250 ("Revert "ACPI: Pass the same
capabilities to the _OSC regardless of the query flag"") and attempted to
be fixed by commit c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not
supported by firmware") but the regression still returned.
These systems with the regression only load support for CPPC from an SSDT
dynamically when _OSC reports CPPC v2. Avoid the problem by not letting
CPPC satisfy the requirement in `acpi_cppc_processor_probe`.
Reported-by: CUI Hao <cuihao.leo@gmail.com>
Reported-by: maxim.novozhilov@gmail.com
Reported-by: lethe.tree@protonmail.com
Reported-by: garystephenwright@gmail.com
Reported-by: galaxyking0419@gmail.com
Fixes: c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware")
Fixes: 2ca8e6285250 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: CUI Hao <cuihao.leo@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If an NFS file is opened for writing and closed, fscache_invalidate() will
be asked to invalidate the file - however, if the cookie is in the
LOOKING_UP state (or the CREATING state), then request to invalidate
doesn't get recorded for fscache_cookie_state_machine() to do something
with.
Fix this by making __fscache_invalidate() set a flag if it sees the cookie
is in the LOOKING_UP state to indicate that we need to go to invalidation.
Note that this requires a count on the n_accesses counter for the state
machine, which that will release when it's done.
fscache_cookie_state_machine() then shifts to the INVALIDATING state if it
sees the flag.
Without this, an nfs file can get corrupted if it gets modified locally and
then read locally as the cache contents may not get updated.
Fixes: d24af13e2e23 ("fscache: Implement cookie invalidation")
Reported-by: Max Kellermann <mk@cm4all.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Max Kellermann <mk@cm4all.com>
Link: https://lore.kernel.org/r/YlWWbpW5Foynjllo@rabbit.intern.cm-ag [1]
|
|
Looking at the conditional lock acquire functions in the kernel due to
the new sparse support (see commit 4a557a5d1a61 "sparse: introduce
conditional lock acquire function attribute"), it became obvious that
the lockref code has a couple of them, but they don't match the usual
naming convention for the other ones, and their return value logic is
also reversed.
In the other very similar places, the naming pattern is '*_and_lock()'
(eg 'atomic_put_and_lock()' and 'refcount_dec_and_lock()'), and the
function returns true when the lock is taken.
The lockref code is superficially very similar to the refcount code,
only with the special "atomic wrt the embedded lock" semantics. But
instead of the '*_and_lock()' naming it uses '*_or_lock()'.
And instead of returning true in case it took the lock, it returns true
if it *didn't* take the lock.
Now, arguably the reflock code is quite logical: it really is a "either
decrement _or_ lock" kind of situation - and the return value is about
whether the operation succeeded without any special care needed.
So despite the similarities, the differences do make some sense, and
maybe it's not worth trying to unify the different conditional locking
primitives in this area.
But while looking at this all, it did become obvious that the
'lockref_get_or_lock()' function hasn't actually had any users for
almost a decade.
The only user it ever had was the shortlived 'd_rcu_to_refcount()'
function, and it got removed and replaced with 'lockref_get_not_dead()'
back in 2013 in commits 0d98439ea3c6 ("vfs: use lockred 'dead' flag to
mark unrecoverably dead dentries") and e5c832d55588 ("vfs: fix dentry
RCU to refcounting possibly sleeping dput()")
In fact, that single use was removed less than a week after the whole
function was introduced in commit b3abd80250c1 ("lockref: add
'lockref_get_or_lock() helper") so this function has been around for a
decade, but only had a user for six days.
Let's just put this mis-designed and unused function out of its misery.
We can think about the naming and semantic oddities of the remaining
'lockref_put_or_lock()' later, but at least that function has users.
And while the naming is different and the return value doesn't match,
that function matches the whole '{atomic,refcount}_dec_and_test()'
pattern much better (ie the magic happens when the count goes down to
zero, not when it is incremented from zero).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kernel tends to try to avoid conditional locking semantics because
it makes it harder to think about and statically check locking rules,
but we do have a few fundamental locking primitives that take locks
conditionally - most obviously the 'trylock' functions.
That has always been a problem for 'sparse' checking for locking
imbalance, and we've had a special '__cond_lock()' macro that we've used
to let sparse know how the locking works:
# define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0)
so that you can then use this to tell sparse that (for example) the
spinlock trylock macro ends up acquiring the lock when it succeeds, but
not when it fails:
#define raw_spin_trylock(lock) __cond_lock(lock, _raw_spin_trylock(lock))
and then sparse can follow along the locking rules when you have code like
if (!spin_trylock(&dentry->d_lock))
return LRU_SKIP;
.. sparse sees that the lock is held here..
spin_unlock(&dentry->d_lock);
and sparse ends up happy about the lock contexts.
However, this '__cond_lock()' use does result in very ugly header files,
and requires you to basically wrap the real function with that macro
that uses '__cond_lock'. Which has made PeterZ NAK things that try to
fix sparse warnings over the years [1].
To solve this, there is now a very experimental patch to sparse that
basically does the exact same thing as '__cond_lock()' did, but using a
function attribute instead. That seems to make PeterZ happy [2].
Note that this does not replace existing use of '__cond_lock()', but
only exposes the new proposed attribute and uses it for the previously
unannotated 'refcount_dec_and_lock()' family of functions.
For existing sparse installations, this will make no difference (a
negative output context was ignored), but if you have the experimental
sparse patch it will make sparse now understand code that uses those
functions, the same way '__cond_lock()' makes sparse understand the very
similar 'atomic_dec_and_lock()' uses that have the old '__cond_lock()'
annotations.
Note that in some cases this will silence existing context imbalance
warnings. But in other cases it may end up exposing new sparse warnings
for code that sparse just didn't see the locking for at all before.
This is a trial, in other words. I'd expect that if it ends up being
successful, and new sparse releases end up having this new attribute,
we'll migrate the old-style '__cond_lock()' users to use the new-style
'__cond_acquires' function attribute.
The actual experimental sparse patch was posted in [3].
Link: https://lore.kernel.org/all/20130930134434.GC12926@twins.programming.kicks-ass.net/ [1]
Link: https://lore.kernel.org/all/Yr60tWxN4P568x3W@worktop.programming.kicks-ass.net/ [2]
Link: https://lore.kernel.org/all/CAHk-=wjZfO9hGqJ2_hGQG3U_XzSh9_XaXze=HgPdvJbgrvASfA@mail.gmail.com/ [3]
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull power management fixes from Rafael Wysocki:
"These fix some issues in cpufreq drivers and some issues in devfreq:
- Fix error code path issues related PROBE_DEFER handling in devfreq
(Christian Marangi)
- Revert an editing accident in SPDX-License line in the devfreq
passive governor (Lukas Bulwahn)
- Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu
devfreq driver (Miaoqian Lin)
- Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang)
- Fix missing of_node_put for qoriq and pmac32 driver (Liang He)
- Fix issues around throttle interrupt for qcom driver (Stephen Boyd)
- Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del
Regno)
- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)"
* tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: passive: revert an editing accident in SPDX-License line
PM / devfreq: Fix kernel warning with cpufreq passive register fail
PM / devfreq: Rework freq_table to be local to devfreq struct
PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h
PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
PM / devfreq: Mute warning on governor PROBE_DEFER
PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
cpufreq: pmac32-cpufreq: Fix refcount leak bug
cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
cpufreq: amd-pstate: Add resume and suspend callbacks
|
|
Instead of passing an extra bool argument to pm_runtime_release_supplier(),
make its callers take care of triggering a runtime-suspend of the
supplier device as needed.
No expected functional impact.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
|
|
Pull io_uring fixes from Jens Axboe:
"Two minor tweaks:
- While we still can, adjust the send/recv based flags to be in
->ioprio rather than in ->addr2. This is consistent with eg accept,
and also doesn't waste a full 64-bit field for flags (Pavel)
- 5.18-stable fix for re-importing provided buffers. Not much real
world relevance here as it'll only impact non-pollable files gone
async, which is more of a practical test case rather than something
that is used in the wild (Dylan)"
* tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
io_uring: fix provided buffer import
io_uring: keep sendrecv flags in ioprio
|
|
rtsx_usb uses same buffer for command and response. There could
be a potential conflict using the same buffer for both especially
if retries and timeouts are involved.
Use separate command and response buffers to avoid conflicts.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/07e3721804ff07aaab9ef5b39a5691d0718b9ade.1656642167.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtsx_usb driver allocates coherent dma buffer for urb transfers.
This buffer is passed to usb_bulk_msg() and usb core tries to
map already mapped buffer running into a dma mapping error.
xhci_hcd 0000:01:00.0: rejecting DMA map of vmalloc memory
WARNING: CPU: 1 PID: 279 at include/linux/dma-mapping.h:326 usb_ hcd_map_urb_for_dma+0x7d6/0x820
...
xhci_map_urb_for_dma+0x291/0x4e0
usb_hcd_submit_urb+0x199/0x12b0
...
usb_submit_urb+0x3b8/0x9e0
usb_start_wait_urb+0xe3/0x2d0
usb_bulk_msg+0x115/0x240
rtsx_usb_transfer_data+0x185/0x1a8 [rtsx_usb]
rtsx_usb_send_cmd+0xbb/0x123 [rtsx_usb]
rtsx_usb_write_register+0x12c/0x143 [rtsx_usb]
rtsx_usb_probe+0x226/0x4b2 [rtsx_usb]
Fix it to use kmalloc() to get DMA-able memory region instead.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/667d627d502e1ba9ff4f9b94966df3299d2d3c0d.1656642167.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull drm fixes from Dave Airlie:
"Bit quieter this week, the main thing is it pulls in the fixes for the
sysfb resource issue you were seeing. these had been queued for next
so should have had some decent testing.
Otherwise amdgpu, i915 and msm each have a few fixes, and vc4 has one.
fbdev:
- sysfb fixes/conflicting fb fixes
amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- KFD TLB flush fix for gfx9 APUs
- Display fix
i915:
- Fix ioctl argument error return
- Fix d3cold disable to allow PCI upstream bridge D3 transition
- Fix setting cache_dirty for dma-buf objects on discrete
msm:
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so
that userspace sees the value *after* it is incremented if waiting
for vblank events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash
in probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check
in dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in
submit ioctl
vc4:
- NULL ptr dereference fix"
* tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"
drm/amdgpu: To flush tlb for MMHUB of RAVEN series
drm/fourcc: fix integer type usage in uapi header
drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
fbdev: Disable sysfb device registration when removing conflicting FBs
firmware: sysfb: Add sysfb_disable() helper function
firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
drm/msm/gem: Fix error return on fence id alloc fail
drm/i915: tweak the ordering in cpu_write_needs_clflush
drm/i915/dgfx: Disable d3cold at gfx root port
drm/i915/gem: add missing else
drm/vc4: perfmon: Fix variable dereferenced before check
drm/msm/dpu: Fix variable dereferenced before check
drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()
drm/msm/dpu: Increment vsync_cnt before waking up userspace
|
|
A NULL pointer dereference fix for vc4, and 3 patches to improve the
sysfb device behaviour when removing conflicting framebuffers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630072404.2fa4z3nk5h5q34ci@houat
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit"
* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: dsa: felix: fix race between reading PSFP stats and port stats
selftest: tun: add test for NAPI dismantle
net: tun: avoid disabling NAPI twice
net: sparx5: mdb add/del handle non-sparx5 devices
net: sfp: fix memory leak in sfp_probe()
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
net: rose: fix UAF bugs caused by timer handler
net: usb: ax88179_178a: Fix packet receiving
net: bonding: fix use-after-free after 802.3ad slave unbind
ipv6: fix lockdep splat in in6_dump_addrs()
net: phy: ax88772a: fix lost pause advertisement configuration
net: phy: Don't trigger state machine while in suspend
usbnet: fix memory allocation in helpers
selftests net: fix kselftest net fatal error
NFC: nxp-nci: don't print header length mismatch on i2c error
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
net: tipc: fix possible refcount leak in tipc_sk_create()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
ipv6/sit: fix ipip6_tunnel_get_prl return value
...
|
|
Pull rdma fixes from Jason Gunthorpe:
"Three minor bug fixes:
- qedr not setting the QP timeout properly toward userspace
- Memory leak on error path in ib_cm
- Divide by 0 in RDMA interrupt moderation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
linux/dim: Fix divide by 0 in RDMA DIM
RDMA/cm: Fix memory leak in ib_cm_insert_listen
RDMA/qedr: Fix reporting QP timeout attribute
|
Trond Myklebust
NeilBrown
Olga Kornievskaia
Olga Kornievskaia
Anna Schumaker
Chuck Lever
Jeff Layton
Linus Torvalds
Rafael J. Wysocki
Pavel Begunkov
Helge Deller
Keith Busch
Hsin-Yi Wang
Vlad Buslov
Lu Baolu
Mario Limonciello
David Howells
Shuah Khan
Dave Airlie