aboutsummaryrefslogtreecommitdiffstats
path: root/include (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-11-18atm: nicstar: Replace in_interrupt() usageSebastian Andrzej Siewior1-0/+1
push_scqe() uses in_interrupt() to figure out if it is allowed to sleep. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Aside of that in_interrupt() is not correct as it does not catch preempt disabled regions which neither can sleep. ns_send() (the only caller of push_scqe()) has the following callers: - vcc_sendmsg() used as proto_ops::sendmsg is expected to be invoked in preemtible context. -> vcc->dev->ops->send() (ns_send()) - atm_vcc::send via atmdev_ops::send either directly (pointer copied by atm_init_aal34() or atm_init_aal5()) or via atm_send_aal0(). This is invoked by drivers (like br2684, clip, pppoatm, ...) which are called from net_device_ops::ndo_start_xmit with BH disabled. Add atmdev_ops::send_bh which is used by callers from BH context (atm_send_aal*()) and if this callback missing then ::send is used instead. Implement this callback in nicstar and use it to replace in_interrupt(). Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18ptp: document struct ptp_clock_request membersAhmad Fatoum1-0/+13
It's arguable most people interested in configuring a PPS signal want it as external output, not as kernel input. PTP_CLK_REQ_PPS is for input though. Add documentation to nudge readers into the correct direction. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201117213826.18235-1-a.fatoum@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: core: fix some kernel-doc markupsMauro Carvalho Chehab1-2/+9
Some identifiers have different names between their prototypes and the kernel-doc markup. In the specific case of netif_subqueue_stopped(), keep the current markup for __netif_subqueue_stopped(), adding a new one for netif_subqueue_stopped(). Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: wan: Delete the DLCI / SDLA driversXie He4-572/+0
The DLCI driver (dlci.c) implements the Frame Relay protocol. However, we already have another newer and better implementation of Frame Relay provided by the HDLC_FR driver (hdlc_fr.c). The DLCI driver's implementation of Frame Relay is used by only one hardware driver in the kernel - the SDLA driver (sdla.c). The SDLA driver provides Frame Relay support for the Sangoma S50x devices. However, the vendor provides their own driver (along with their own multi-WAN-protocol implementations including Frame Relay), called WANPIPE. I believe most users of the hardware would use the vendor-provided WANPIPE driver instead. (The WANPIPE driver was even once in the kernel, but was deleted in commit 8db60bcf3021 ("[WAN]: Remove broken and unmaintained Sangoma drivers.") because the vendor no longer updated the in-kernel WANPIPE driver.) Cc: Mike McLagan <mike.mclagan@linux.org> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201114150921.685594-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handlingRandy Dunlap1-2/+2
The previous Kconfig patch led to some other build errors as reported by the 0day bot and my own overnight build testing. These are all in <linux/skbuff.h> when KCOV is enabled but SKB_EXTENSIONS is not enabled, so fix those by combining those conditions in the header file. Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions") Fixes: 85ce50d337d1 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20201116212108.32465-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16tcp: factor out __tcp_close() helperPaolo Abeni1-0/+1
unlocked version of protocol level close, will be used by MPTCP to allow decouple orphaning and subflow level close. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16tcp: factor out tcp_build_frag()Paolo Abeni1-0/+3
Will be needed by the next patch, as MPTCP needs to handle directly the error/memory-allocation-needed path. No functional changes intended. Additionally let MPTCP code access the tcp_remove_empty_skb() helper. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16treewide: rename nla_strlcpy to nla_strscpy.Francis Laniel3-4/+4
Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new name of this function. Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16Modify return value of nla_strlcpy to match that of strscpy.Francis Laniel2-2/+2
nla_strlcpy now returns -E2BIG if src was truncated when written to dst. It also returns this error value if dstsize is 0 or higher than INT_MAX. For example, if src is "foo\0" and dst is 3 bytes long, the result will be: 1. "foG" after memcpy (G means garbage). 2. "fo\0" after memset. 3. -E2BIG is returned because src was not completely written into dst. The callers of nla_strlcpy were modified to take into account this modification. Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14tcp: avoid indirect call to tcp_stream_memory_free()Eric Dumazet1-2/+6
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14tcp: uninline tcp_stream_memory_free()Eric Dumazet1-12/+1
Both IPv4 and IPv6 needs it via a function pointer. Following patch will avoid the indirect call. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski9-2/+139
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-11-14 1) Add BTF generation for kernel modules and extend BTF infra in kernel e.g. support for split BTF loading and validation, from Andrii Nakryiko. 2) Support for pointers beyond pkt_end to recognize LLVM generated patterns on inlined branch conditions, from Alexei Starovoitov. 3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh. 4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage infra, from Martin KaFai Lau. 5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the XDP_REDIRECT path, from Lorenzo Bianconi. 6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI context, from Song Liu. 7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build for different target archs on same source tree, from Jean-Philippe Brucker. 8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet. 9) Move functionality from test_tcpbpf_user into the test_progs framework so it can run in BPF CI, from Alexander Duyck. 10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner. Note that for the fix from Song we have seen a sparse report on context imbalance which requires changes in sparse itself for proper annotation detection where this is currently being discussed on linux-sparse among developers [0]. Once we have more clarification/guidance after their fix, Song will follow-up. [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/ https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/ * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits) net: mlx5: Add xdp tx return bulking support net: mvpp2: Add xdp tx return bulking support net: mvneta: Add xdp tx return bulking support net: page_pool: Add bulk support for ptr_ring net: xdp: Introduce bulking for xdp tx return path bpf: Expose bpf_d_path helper to sleepable LSM hooks bpf: Augment the set of sleepable LSM hooks bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Rename some functions in bpf_sk_storage bpf: Folding omem_charge() into sk_storage_charge() selftests/bpf: Add asm tests for pkt vs pkt_end comparison. selftests/bpf: Add skb_pkt_end test bpf: Support for pointers beyond pkt_end. tools/bpf: Always run the *-clean recipes tools/bpf: Add bootstrap/ to .gitignore bpf: Fix NULL dereference in bpf_task_storage tools/bpftool: Fix build slowdown tools/runqslower: Build bpftool using HOSTCC tools/runqslower: Enable out-of-tree build ... ==================== Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14net: page_pool: Add bulk support for ptr_ringLorenzo Bianconi1-0/+26
Introduce the capability to batch page_pool ptr_ring refill since it is usually run inside the driver NAPI tx completion loop. Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/bpf/08dd249c9522c001313f520796faa777c4089e1c.1605267335.git.lorenzo@kernel.org
2020-11-14net: xdp: Introduce bulking for xdp tx return pathLorenzo Bianconi1-1/+16
XDP bulk APIs introduce a defer/flush mechanism to return pages belonging to the same xdp_mem_allocator object (identified via the mem.id field) in bulk to optimize I-cache and D-cache since xdp_return_frame is usually run inside the driver NAPI tx completion loop. The bulk queue size is set to 16 to be aligned to how XDP_REDIRECT bulking works. The bulk is flushed when it is full or when mem.id changes. xdp_frame_bulk is usually stored/allocated on the function call-stack to avoid locking penalties. Current implementation considers only page_pool memory model. Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/bpf/e190c03eac71b20c8407ae0fc2c399eda7835f49.1605267335.git.lorenzo@kernel.org
2020-11-13Merge tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJakub Kicinski5-9/+61
Johannes Berg says: ==================== Some updates: * injection/radiotap updates for new test capabilities * remove WDS support - even years ago when we turned it off by default it was already basically unusable * support for HE (802.11ax) rates for beacons * support for some vendor-specific HE rates * many other small features/cleanups * tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (21 commits) nl80211: fix kernel-doc warning in the new SAE attribute cfg80211: remove WDS code mac80211: remove WDS-related code rt2x00: remove WDS code b43legacy: remove WDS code b43: remove WDS code carl9170: remove WDS code ath9k: remove WDS code wireless: remove CONFIG_WIRELESS_WDS mac80211: assure that certain drivers adhere to DONT_REORDER flag mac80211: don't overwrite QoS TID of injected frames mac80211: adhere to Tx control flag that prevents frame reordering mac80211: add radiotap flag to assure frames are not reordered mac80211: save HE oper info in BSS config for mesh cfg80211: add support to configure HE MCS for beacon rate nl80211: fix beacon tx rate mask validation nl80211/cfg80211: fix potential infinite loop cfg80211: Add support to calculate and report 4096-QAM HE rates cfg80211: Add support to configure SAE PWE value to drivers ieee80211: Add definition for WFA DPP ... ==================== Link: https://lore.kernel.org/r/20201113101148.25268-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13bpf: Augment the set of sleepable LSM hooksKP Singh1-0/+7
Update the set of sleepable hooks with the ones that do not trigger a warning with might_fault() when exercised with the correct kernel config options enabled, i.e. DEBUG_ATOMIC_SLEEP=y LOCKDEP=y PROVE_LOCKING=y This means that a sleepable LSM eBPF program can be attached to these LSM hooks. A new helper method bpf_lsm_is_sleepable_hook is added and the set is maintained locally in bpf_lsm.c Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201113005930.541956-2-kpsingh@chromium.org
2020-11-12bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TPMartin KaFai Lau1-0/+2
This patch enables the FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage_(get|delete) helper, so those tracing programs can access the sk's bpf_local_storage and the later selftest will show some examples. The bpf_sk_storage is currently used in bpf-tcp-cc, tc, cg sockops...etc which is running either in softirq or task context. This patch adds bpf_sk_storage_get_tracing_proto and bpf_sk_storage_delete_tracing_proto. They will check in runtime that the helpers can only be called when serving softirq or running in a task context. That should enable most common tracing use cases on sk. During the load time, the new tracing_allowed() function will ensure the tracing prog using the bpf_sk_storage_(get|delete) helper is not tracing any bpf_sk_storage*() function itself. The sk is passed as "void *" when calling into bpf_local_storage. This patch only allows tracing a kernel function. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201112211313.2587383-1-kafai@fb.com
2020-11-12Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski12-45/+60
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13bpf: Support for pointers beyond pkt_end.Alexei Starovoitov1-1/+1
This patch adds the verifier support to recognize inlined branch conditions. The LLVM knows that the branch evaluates to the same value, but the verifier couldn't track it. Hence causing valid programs to be rejected. The potential LLVM workaround: https://reviews.llvm.org/D87428 can have undesired side effects, since LLVM doesn't know that skb->data/data_end are being compared. LLVM has to introduce extra boolean variable and use inline_asm trick to force easier for the verifier assembly. Instead teach the verifier to recognize that r1 = skb->data; r1 += 10; r2 = skb->data_end; if (r1 > r2) { here r1 points beyond packet_end and subsequent if (r1 > r2) // always evaluates to "true". } Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201111031213.25109-2-alexei.starovoitov@gmail.com
2020-11-12net: usb: switch to dev_get_tstats64 and remove usbnet_get_stats64 aliasHeiner Kallweit1-2/+0
Replace usbnet_get_stats64() with new identical core function dev_get_tstats64() in all users and remove usbnet_get_stats64(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12usbnet: switch to core handling of rx/tx byte/packet countersHeiner Kallweit1-4/+2
Use netdev->tstats instead of a member of usbnet for storing a pointer to the per-cpu counters. This allows us to use core functionality for statistics handling. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds4-18/+12
Pull networking fixes from Jakub Kicinski: "Current release - regressions: - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC Current release - bugs in new features: - mptcp: provide rmem[0] limit offset to fix oops Previous release - regressions: - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU calculations - lan743x: correctly handle chips with internal PHY - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE - mlx5e: Fix VXLAN port table synchronization after function reload Previous release - always broken: - bpf: Zero-fill re-used per-cpu map element - fix out-of-order UDP packets when forwarding with UDP GSO fraglists turned on: - fix UDP header access on Fast/frag0 UDP GRO - fix IP header access and skb lookup on Fast/frag0 UDP GRO - ethtool: netlink: add missing netdev_features_change() call - net: Update window_clamp if SOCK_RCVBUF is set - igc: Fix returning wrong statistics - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies - r8169: disable hw csum for short packets on all chip versions - vrf: Fix fast path output packet handling with async Netfilter rules" * tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) lan743x: fix use of uninitialized variable net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO net: udp: fix UDP header access on Fast/frag0 UDP GRO devlink: Avoid overwriting port attributes of registered port vrf: Fix fast path output packet handling with async Netfilter rules cosa: Add missing kfree in error path of cosa_write net: switch to the kernel.org patchwork instance ch_ktls: stop the txq if reaches threshold ch_ktls: tcb update fails sometimes ch_ktls/cxgb4: handle partial tag alone SKBs ch_ktls: don't free skb before sending FIN ch_ktls: packet handling prior to start marker ch_ktls: Correction in middle record handling ch_ktls: missing handling of header alone ch_ktls: Correction in trimmed_len calculation cxgb4/ch_ktls: creating skbs causes panic ch_ktls: Update cheksum information ch_ktls: Correction in finding correct length cxgb4/ch_ktls: decrypted bit is not enough net/x25: Fix null-ptr-deref in x25_connect ...
2020-11-12Merge tag 'pm-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-2/+16
Pull power management fixes from Rafael Wysocki: "Make the intel_pstate driver behave as expected when it operates in the passive mode with HWP enabled and the 'powersave' governor on top of it" * tag 'pm-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account cpufreq: Add strict_target to struct cpufreq_policy cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET cpufreq: Introduce governor flags
2020-11-11net: evaluate net.ipv4.conf.all.proxy_arp_pvlanVincent Bernat1-1/+1
Introduced in 65324144b50b, the "proxy_arp_vlan" sysctl is a per-interface sysctl to tune proxy ARP support for private VLANs. While the "all" variant is exposed, it was a noop and never evaluated. We use the usual "or" logic for this kind of sysctls. Fixes: 65324144b50b ("net: RFC3069, private VLAN proxy arp support") Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: evaluate net.ipvX.conf.all.ignore_routes_with_linkdownVincent Bernat1-1/+1
Introduced in 0eeb075fad73, the "ignore_routes_with_linkdown" sysctl ignores a route whose interface is down. It is provided as a per-interface sysctl. However, while a "all" variant is exposed, it was a noop since it was never evaluated. We use the usual "or" logic for this kind of sysctls. Tested with: ip link add type veth # veth0 + veth1 ip link add type veth # veth1 + veth2 ip link set up dev veth0 ip link set up dev veth1 # link-status paired with veth0 ip link set up dev veth2 ip link set up dev veth3 # link-status paired with veth2 # First available path ip -4 addr add 203.0.113.${uts#H}/24 dev veth0 ip -6 addr add 2001:db8:1::${uts#H}/64 dev veth0 # Second available path ip -4 addr add 192.0.2.${uts#H}/24 dev veth2 ip -6 addr add 2001:db8:2::${uts#H}/64 dev veth2 # More specific route through first path ip -4 route add 198.51.100.0/25 via 203.0.113.254 # via veth0 ip -6 route add 2001:db8:3::/56 via 2001:db8:1::ff # via veth0 # Less specific route through second path ip -4 route add 198.51.100.0/24 via 192.0.2.254 # via veth2 ip -6 route add 2001:db8:3::/48 via 2001:db8:2::ff # via veth2 # H1: enable on "all" # H2: enable on "veth0" for v in ipv4 ipv6; do case $uts in H1) sysctl -qw net.${v}.conf.all.ignore_routes_with_linkdown=1 ;; H2) sysctl -qw net.${v}.conf.veth0.ignore_routes_with_linkdown=1 ;; esac done set -xe # When veth0 is up, best route is through veth0 ip -o route get 198.51.100.1 | grep -Fw veth0 ip -o route get 2001:db8:3::1 | grep -Fw veth0 # When veth0 is down, best route should be through veth2 on H1/H2, # but on veth0 on H2 ip link set down dev veth1 # down veth0 ip route show [ $uts != H3 ] || ip -o route get 198.51.100.1 | grep -Fw veth0 [ $uts != H3 ] || ip -o route get 2001:db8:3::1 | grep -Fw veth0 [ $uts = H3 ] || ip -o route get 198.51.100.1 | grep -Fw veth2 [ $uts = H3 ] || ip -o route get 2001:db8:3::1 | grep -Fw veth2 Without this patch, the two last lines would fail on H1 (the one using the "all" sysctl). With the patch, everything succeeds as expected. Also document the sysctl in `ip-sysctl.rst`. Fixes: 0eeb075fad73 ("net: ipv4 sysctl option to ignore routes when nexthop link is down") Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11Merge branch 'stable/for-linus-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlbLinus Torvalds1-7/+3
Pull swiotlb fixes from Konrad Rzeszutek Wilk: "Two tiny fixes for issues that make drivers under Xen unhappy under certain conditions" * 'stable/for-linus-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: remove the tbl_dma_addr argument to swiotlb_tbl_map_single swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb"
2020-11-11nl80211: fix kernel-doc warning in the new SAE attributeJohannes Berg1-8/+15
Format the items as a definition list, to avoid the warning from the rst parsing. Fixes: 9f0ffa418483 ("cfg80211: Add support to configure SAE PWE value to drivers") Link: https://lore.kernel.org/r/20201110094911.bb020e863aa0.I960caf90e2a8cc23f6bf9245d77524df6a4d8f37@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-11cfg80211: remove WDS codeJohannes Berg2-6/+2
Remove all the code that was there to configure WDS interfaces, now that there's no way to reach it anymore. Link: https://lore.kernel.org/r/20201109105103.8f5b98e4068d.I5f5129041649ef2862b69683574bb3344743727b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-10inet: udp{4|6}_lib_lookup_skb() skb argument is constEric Dumazet1-3/+3
The skb is needed only to fetch the keys for the lookup. Both functions are used from GRO stack, we do not want accidental modification of the skb. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10inet: constify inet_sdif() argumentEric Dumazet1-1/+1
inet_sdif() does not modify the skb. This will permit propagating the const qualifier in udp{4|6}_lib_lookup_skb() functions. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10bpf: Load and verify kernel module BTFsAndrii Nakryiko2-0/+6
Add kernel module listener that will load/validate and unload module BTF. Module BTFs gets ID generated for them, which makes it possible to iterate them with existing BTF iteration API. They are given their respective module's names, which will get reported through GET_OBJ_INFO API. They are also marked as in-kernel BTFs for tooling to distinguish them from user-provided BTFs. Also, similarly to vmlinux BTF, kernel module BTFs are exposed through sysfs as /sys/kernel/btf/<module-name>. This is convenient for user-space tools to inspect module BTF contents and dump their types with existing tools: [vmuser@archvm bpf]$ ls -la /sys/kernel/btf total 0 drwxr-xr-x 2 root root 0 Nov 4 19:46 . drwxr-xr-x 13 root root 0 Nov 4 19:46 .. ... -r--r--r-- 1 root root 888 Nov 4 19:46 irqbypass -r--r--r-- 1 root root 100225 Nov 4 19:46 kvm -r--r--r-- 1 root root 35401 Nov 4 19:46 kvm_intel -r--r--r-- 1 root root 120 Nov 4 19:46 pcspkr -r--r--r-- 1 root root 399 Nov 4 19:46 serio_raw -r--r--r-- 1 root root 4094095 Nov 4 19:46 vmlinux Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/bpf/20201110011932.3201430-5-andrii@kernel.org
2020-11-10bpf: Assign ID to vmlinux BTF and return extra info for BTF in GET_OBJ_INFOAndrii Nakryiko1-0/+3
Allocate ID for vmlinux BTF. This makes it visible when iterating over all BTF objects in the system. To allow distinguishing vmlinux BTF (and later kernel module BTF) from user-provided BTFs, expose extra kernel_btf flag, as well as BTF name ("vmlinux" for vmlinux BTF, will equal to module's name for module BTF). We might want to later allow specifying BTF name for user-provided BTFs as well, if that makes sense. But currently this is reserved only for in-kernel BTFs. Having in-kernel BTFs exposed IDs will allow to extend BPF APIs that require in-kernel BTF type with ability to specify BTF types from kernel modules, not just vmlinux BTF. This will be implemented in a follow up patch set for fentry/fexit/fmod_ret/lsm/etc. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201110011932.3201430-3-andrii@kernel.org
2020-11-10cpufreq: Add strict_target to struct cpufreq_policyRafael J. Wysocki1-0/+6
Add a new field to be set when the CPUFREQ_GOV_STRICT_TARGET flag is set for the current governor to struct cpufreq_policy, so that the drivers needing to check CPUFREQ_GOV_STRICT_TARGET do not have to access the governor object during every frequency transition. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-11-10cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGETRafael J. Wysocki1-0/+3
Introduce a new governor flag, CPUFREQ_GOV_STRICT_TARGET, for the governors that want the target frequency to be set exactly to the given value without leaving any room for adjustments on the hardware side and set this flag for the powersave and performance governors. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-11-10cpufreq: Introduce governor flagsRafael J. Wysocki1-2/+7
A new cpufreq governor flag will be added subsequently, so replace the bool dynamic_switching fleid in struct cpufreq_governor with a flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for the "dynamic switching" governors instead of it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-11-09net: remove ip_tunnel_get_stats64Heiner Kallweit1-2/+0
After having migrated all users remove ip_tunnel_get_stats64(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09net: core: add dev_get_tstats64 as a ndo_get_stats64 implementationHeiner Kallweit1-0/+1
It's a frequent pattern to use netdev->stats for the less frequently accessed counters and per-cpu counters for the frequently accessed counters (rx/tx bytes/packets). Add a default ndo_get_stats64() implementation for this use case. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09net/packet: make packet_fanout.arr size configurable up to 64KTanner Love1-0/+12
One use case of PACKET_FANOUT is lockless reception with one socket per CPU. 256 is a practical limit on increasingly many machines. Increase PACKET_FANOUT_MAX to 64K. Expand setsockopt PACKET_FANOUT to take an extra argument max_num_members. Also explicitly define a fanout_args struct, instead of implicitly casting to an integer. This documents the API and simplifies the control flow. If max_num_members is not specified or is set to 0, then 256 is used, same as before. Signed-off-by: Tanner Love <tannerlove@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09net: udp: introduce UDP_MIB_MEMERRORS for udp_memMenglong Dong1-0/+1
When udp_memory_allocated is at the limit, __udp_enqueue_schedule_skb will return a -ENOBUFS, and skb will be dropped in __udp_queue_rcv_skb without any counters being done. It's hard to find out what happened once this happen. So we introduce a UDP_MIB_MEMERRORS to do this job. Well, this change looks friendly to the existing users, such as netstat: $ netstat -u -s Udp: 0 packets received 639 packets to unknown port received. 158689 packet receive errors 180022 packets sent RcvbufErrors: 20930 MemErrors: 137759 UdpLite: IpExt: InOctets: 257426235 OutOctets: 257460598 InNoECTPkts: 181177 v2: - Fix some alignment problems Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Link: https://lore.kernel.org/r/1604627354-43207-1-git-send-email-dong.menglong@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09Merge tag 'nfsd-5.10-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-4/+4
Pull nfsd fixes from Bruce Fields: "This is mainly server-to-server copy and fallout from Chuck's 5.10 rpc refactoring" * tag 'nfsd-5.10-1' of git://linux-nfs.org/~bfields/linux: net/sunrpc: fix useless comparison in proc_do_xprt() net/sunrpc: return 0 on attempt to write to "transports" NFSD: fix missing refcount in nfsd4_copy by nfsd4_do_async_copy NFSD: Fix use-after-free warning when doing inter-server copy NFSD: MKNOD should return NFSERR_BADTYPE instead of NFSERR_INVAL SUNRPC: Fix general protection fault in trace_rpc_xdr_overflow() NFSD: NFSv3 PATHCONF Reply is improperly formed
2020-11-09Merge tag 'ext4_for_linus_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds2-12/+21
Pull ext4 fixes and cleanups from Ted Ts'o: "More fixes and cleanups for the new fast_commit features, but also a few other miscellaneous bug fixes and a cleanup for the MAINTAINERS file" * tag 'ext4_for_linus_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (28 commits) jbd2: fix up sparse warnings in checkpoint code ext4: fix sparse warnings in fast_commit code ext4: cleanup fast commit mount options jbd2: don't start fast commit on aborted journal ext4: make s_mount_flags modifications atomic ext4: issue fsdev cache flush before starting fast commit ext4: disable fast commit with data journalling ext4: fix inode dirty check in case of fast commits ext4: remove unnecessary fast commit calls from ext4_file_mmap ext4: mark buf dirty before submitting fast commit buffer ext4: fix code documentatioon ext4: dedpulicate the code to wait on inode that's being committed jbd2: don't read journal->j_commit_sequence without taking a lock jbd2: don't touch buffer state until it is filled jbd2: add todo for a fast commit performance optimization jbd2: don't pass tid to jbd2_fc_end_commit_fallback() jbd2: don't use state lock during commit path jbd2: drop jbd2_fc_init documentation ext4: clean up the JBD2 API that initializes fast commits jbd2: rename j_maxlen to j_total_len and add jbd2_journal_max_txn_bufs ...
2020-11-08Merge tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-1/+1
Pull xfs fixes from Darrick Wong: - Fix an uninitialized struct problem - Fix an iomap problem zeroing unwritten EOF blocks - Fix some clumsy error handling when writeback fails on filesystems with blocksize < pagesize - Fix a retry loop not resetting loop variables properly - Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel actually does permit that combination - Fix excessive page cache flushing when unsharing part of a file * tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: only flush the unshared range in xfs_reflink_unshare xfs: fix scrub flagging rtinherit even if there is no rt device xfs: fix missing CoW blocks writeback conversion retry iomap: clean up writeback state logic on writepage error iomap: support partial page discard on writeback block mapping failure xfs: flush new eof page on truncate to avoid post-eof corruption xfs: set xefi_discard when creating a deferred agfl free log intent item
2020-11-08Merge branch 'hch' (patches from Christoph)Linus Torvalds1-0/+1
Merge procfs splice read fixes from Christoph Hellwig: "Greg reported a problem due to the fact that Android tests use procfs files to test splice, which stopped working with the changes for set_fs() removal. This series adds read_iter support for seq_file, and uses those for various proc files using seq_file to restore splice read support" [ Side note: Christoph initially had a scripted "move everything over" patch, which looks fine, but I personally would prefer us to actively discourage splice() on random files. So this does just the minimal basic core set of proc file op conversions. For completeness, and in case people care, that script was sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g' but I'll wait and see if somebody has a strong argument for using splice on random small /proc files before I'd run it on the whole kernel. - Linus ] * emailed patches from Christoph Hellwig <hch@lst.de>: proc "seq files": switch to ->read_iter proc "single files": switch to ->read_iter proc/stat: switch to ->read_iter proc/cpuinfo: switch to ->read_iter proc: wire up generic_file_splice_read for iter ops seq_file: add seq_read_iter
2020-11-07Merge tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+2
Pull io_uring fixes from Jens Axboe: "A set of fixes for io_uring: - SQPOLL cancelation fixes - Two fixes for the io_identity COW - Cancelation overflow fix (Pavel) - Drain request cancelation fix (Pavel) - Link timeout race fix (Pavel)" * tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block: io_uring: fix link lookup racing with link timeout io_uring: use correct pointer for io_uring_show_cred() io_uring: don't forget to task-cancel drained reqs io_uring: fix overflowed cancel w/ linked ->files io_uring: drop req/tctx io_identity separately io_uring: ensure consistent view of original task ->mm from SQPOLL io_uring: properly handle SQPOLL request cancelations io-wq: cancel request if it's asking for files and we don't have them
2020-11-07net: sched: convert tasklets to use new tasklet_setup() APIAllen Pais1-0/+5
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06ext4: disable fast commit with data journallingHarshad Shirwadkar1-2/+4
Fast commits don't work with data journalling. This patch disables the fast commit support when data journalling is turned on. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201106035911.1942128-19-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-11-06jbd2: don't pass tid to jbd2_fc_end_commit_fallback()Harshad Shirwadkar1-1/+1
In jbd2_fc_end_commit_fallback(), we know which tid to commit. There's no need for caller to pass it. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201106035911.1942128-10-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-11-06jbd2: don't use state lock during commit pathHarshad Shirwadkar1-4/+6
Variables journal->j_fc_off, journal->j_fc_wbuf are accessed during commit path. Since today we allow only one process to perform a fast commit, there is no need take state lock before accessing these variables. This patch removes these locks and adds comments to describe this. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201106035911.1942128-9-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-11-06ext4: clean up the JBD2 API that initializes fast commitsHarshad Shirwadkar1-1/+1
This patch removes jbd2_fc_init() API and its related functions to simplify enabling fast commits. With this change, the number of fast commit blocks to use is solely determined by the JBD2 layer. So, we move the default value for minimum number of fast commit blocks from ext4/fast_commit.h to include/linux/jbd2.h. However, whether or not to use fast commits is determined by the file system. The file system just sets the fast commit feature using jbd2_journal_set_features(). JBD2 layer then determines how many blocks to use for fast commits (based on the value found in the JBD2 superblock). Note that the JBD2 feature flag of fast commits is just an indication that there are fast commit blocks present on disk. It doesn't tell JBD2 layer about the intent of the file system of whether to it wants to use fast commit or not. That's why, we blindly clear the fast commit flag in journal_reset() after the recovery is done. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201106035911.1942128-7-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-11-06jbd2: rename j_maxlen to j_total_len and add jbd2_journal_max_txn_bufsHarshad Shirwadkar1-2/+7
The on-disk superblock field sb->s_maxlen represents the total size of the journal including the fast commit area and is no more the max number of blocks available for a transaction. The maximum number of blocks available to a transaction is reduced by the number of fast commit blocks. So, this patch renames j_maxlen to j_total_len to better represent its intent. Also, it adds a function to calculate max number of bufs available for a transaction. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201106035911.1942128-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.