aboutsummaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-09-17quota: simplify the quotactl compat handlingChristoph Hellwig1-3/+0
Fold the misaligned u64 workarounds into the main quotactl flow instead of implementing a separate compat syscall handler. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-17compat: add a compat_need_64bit_alignment_fixup() helperChristoph Hellwig1-0/+9
Add a helper to check if the calling syscall needs a fixup for non-natural 64-bit type alignment in the compat ABI. This will only return true for i386 syscalls on x86_64. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-17compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h>Christoph Hellwig1-0/+8
lift the compat_s64 and compat_u64 definitions into common code using the COMPAT_FOR_U64_ALIGNMENT symbol for the x86 special case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-17coresight: stm: Support marked packetTingwei Zhang1-0/+1
STP_PACKET_MARKED is not supported by STM currently. Add STM_FLAG_MARKED to support marked packet in STM. Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17dma-mapping: introduce DMA range map, supplanting dma_pfn_offsetJim Quinlan3-9/+57
The new field 'dma_range_map' in struct device is used to facilitate the use of single or multiple offsets between mapping regions of cpu addrs and dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only capable of holding a single uniform offset and had no region bounds checking. The function of_dma_get_range() has been modified so that it takes a single argument -- the device node -- and returns a map, NULL, or an error code. The map is an array that holds the information regarding the DMA regions. Each range entry contains the address offset, the cpu_start address, the dma_start address, and the size of the region. of_dma_configure() is the typical manner to set range offsets but there are a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel driver code. These cases now invoke the function dma_direct_set_offset(dev, cpu_addr, dma_addr, size). Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [hch: various interface cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Nathan Chancellor <natechancellor@gmail.com>
2020-09-17dma-direct: Fix potential NULL pointer dereferenceThomas Tai1-3/+0
When booting the kernel v5.9-rc4 on a VM, the kernel would panic when printing a warning message in swiotlb_map(). The dev->dma_mask must not be a NULL pointer when calling the dma mapping layer. A NULL pointer check can potentially avoid the panic. Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-17Merge series "ASoC: SOF: small fixes for 5.10" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:Mark Brown1-1/+3
Series that adds debug support for IMX platforms, more details to FW version information, adds missing -EACCESS handling to pm_runtime_get_sync() calls and a set of minor cosmetic, trace verbosity and coding style issues. Guennadi Liakhovetski (3): ASoC: SOF: (cosmetic) remove redundant "ret" variable uses ASoC: SOF: remove several superfluous type-casts ASoC: SOF: fix range checks Iulian Olaru (1): ASoC: SOF: imx: Add debug support for imx platforms Karol Trzcinski (1): ASoC: SOF: Add `src_hash` to `sof_ipc_fw_version` structure Pierre-Louis Bossart (3): ASoC: SOF: debug: update test for pm_runtime_get_sync() ASoC: SOF: control: update test for pm_runtime_get_sync() ASoC: SOF: Intel: hda: reduce verbosity of boot error logs include/sound/sof/info.h | 4 +- sound/soc/sof/control.c | 62 +++++++++++++-------------- sound/soc/sof/debug.c | 2 +- sound/soc/sof/imx/Kconfig | 8 ++++ sound/soc/sof/imx/Makefile | 3 ++ sound/soc/sof/imx/imx-common.c | 72 ++++++++++++++++++++++++++++++++ sound/soc/sof/imx/imx-common.h | 16 +++++++ sound/soc/sof/imx/imx8.c | 23 +++++++++- sound/soc/sof/imx/imx8m.c | 17 +++++++- sound/soc/sof/intel/hda-loader.c | 16 +++---- sound/soc/sof/intel/hda.c | 12 ++++-- sound/soc/sof/intel/hda.h | 2 + sound/soc/sof/sof-audio.c | 6 +-- sound/soc/sof/sof-priv.h | 8 ++++ sound/soc/sof/topology.c | 44 ++++++++++--------- 15 files changed, 226 insertions(+), 69 deletions(-) create mode 100644 sound/soc/sof/imx/imx-common.c create mode 100644 sound/soc/sof/imx/imx-common.h -- 2.27.0
2020-09-17Merge series "ASoC: q6afe: add clocks support" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:Mark Brown1-1/+73
q6afe already exposes clocks using apis, but not as proper clock controller driver. This patch puts those clocks in to a proper clock controller so that other drivers that depend on those clocks can be properly expressed. Srinivas Kandagatla (2): ASoC: q6afe: dt-bindings: add q6afe clock bindings ASoC: q6afe-clocks: add q6afe clock controller .../devicetree/bindings/sound/qcom,q6afe.txt | 23 ++ include/dt-bindings/sound/qcom,q6afe.h | 74 ++++- sound/soc/qcom/Kconfig | 4 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-clocks.c | 270 ++++++++++++++++++ 5 files changed, 371 insertions(+), 1 deletion(-) create mode 100644 sound/soc/qcom/qdsp6/q6afe-clocks.c -- 2.21.0
2020-09-17RDMA/mlx5: Delete duplicated mlx5_ptys_width enumAharon Landau1-0/+8
Combine two same enums to avoid duplication. Signed-off-by: Aharon Landau <aharonl@mellanox.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2020-09-17net/mlx5: Refactor query port speed functionsAharon Landau1-4/+3
The functions mlx5_query_port_link_width_oper and mlx5_query_port_ib_proto_oper are always called together, so combine them to a new function called mlx5_query_port_oper to avoid duplication. And while the mlx5i_get_port_settings is the same as mlx5_query_port_oper therefore let's remove it. According to the IB spec link_width_oper and ib_proto_oper should be u16 and not as written u8, so perform casting as a preparation to cross-RDMA patch which will fix that type for all drivers in the RDMA subsystem. Fixes: ada68c31ba9c ("net/mlx5: Introduce a new header file for physical port functions") Signed-off-by: Aharon Landau <aharonl@mellanox.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2020-09-17drm/dp: Add helpers for DFP YCbCr 4:2:0 handlingVille Syrjälä1-0/+8
Add helpers to determine whether the DFP supports YCbCr 4:2:0 passthrough or YCbCr 4:4:4->4:2:0 conversion. v2: Add kdocs (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-18-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17Merge branch 'asoc-5.9' into asoc-5.10Mark Brown1-0/+2
2020-09-17drm/dp: Add drm_dp_downstream_mode()Ville Syrjälä2-0/+16
The downstream facing port caps in the DPCD can give us a hint as to what kind of display mode the sink can use if it doesn't have an EDID. Use that information to pick a suitable mode. v2: Use Returns: for kdoc (Lyude) Add kdocs for drm_display_mode_from_cea_vic() (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-14-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Add drm_dp_downstream_{min,max}_tmds_clock()Ville Syrjälä1-0/+6
Add helpers to get the TMDS clock limits for HDMI/DVI downstream facing ports. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-11-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Redo drm_dp_downstream_max_clock() as drm_dp_downstream_max_dotclock()Ville Syrjälä1-2/+2
We want to differentiate between the DFP dotclock and TMDS clock limits. Let's convert the current thing to just give us the dotclock limit. v2: Use Returns: for kdoc (Lyude) Fix up nouveau code too Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-9-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17ASoC: q6afe: dt-bindings: add q6afe clock bindingsSrinivas Kandagatla1-1/+73
q6afe exposes various lpass clocks controls via q6dsp q6afe commands. This patch adds bindings required for this clock controller. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910135708.14842-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: Add `src_hash` to `sof_ipc_fw_version` structureKarol Trzcinski1-1/+3
This field will be used to compare ldc file with loaded fw version, to assert validity of trace logs. Value used in sof-logger. Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17drm/ttm: remove superflous extern attribute from funcsChristian König2-24/+20
Extern is the default attribute for functions anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/390972/
2020-09-17drm/dp: Pimp drm_dp_downstream_max_bpc()Ville Syrjälä1-3/+7
Deal with more cases in drm_dp_downstream_max_bpc(): - DPCD 1.0 -> assume 8bpc for non-DP - DPCD 1.1+ DP (or DP++ with DP sink) -> allow anything - DPCD 1.1+ TMDS -> check the caps, assume 8bpc if the value is crap - anything else -> assume 8bpc v2: Use Returns: for kdoc (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-8-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Add helpers to identify downstream facing port typesVille Syrjälä1-0/+5
Add a few helpers to let us better identify which kind of DFP we're dealing with. v2: Use Returns: for kdoc (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-7-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Define more downstream facing port capsVille Syrjälä1-1/+7
Our definitions for the DPCD DFP capabilities are lacking. Add the missing bits. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-5-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Define protocol converter DPCD registersVille Syrjälä1-0/+10
DP 1.3 and 1.4 introduced some new registers for DP->HDMI protocol converters. Define those. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-4-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm: fix spelling error in commentsWang Qing1-1/+1
Change the comment typo: "manger" -> "manager". Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1600308275-32094-1-git-send-email-wangqing@vivo.com
2020-09-17clk: samsung: Add clk ID definitions for the CPU parent clocksSylwester Nawrocki2-1/+8
Add clock ID definitions for the CPU parent clocks for SoCs which don't have such definitions yet. This will allow us to reference the parent clocks directly by cached struct clk_hw pointers in the clock provider, rather than doing clk lookup by name. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200826171529.23618-1-s.nawrocki@samsung.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-09-17clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3dSylwester Nawrocki1-0/+1
This patch adds ID for the mout_sw_aclk_g3d (SW_CLKMUX_ACLK_G3D) clock, mostly for internal use in the CMU driver. It will allow to avoid the __clk_lookup() call when setting up the clock during the clock provider initialization. Link: https://lore.kernel.org/r/20200811151251.31613-1-s.nawrocki@samsung.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-09-17drm/ttm: some cleanupsChristian König2-13/+0
Unexport ttm_check_under_lowerlimit. Make ttm_bo_acc_size static and unexport it. Remove ttm_get_kernel_zone_memory_size. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/390515/
2020-09-17cper,edac,efi: Memory Error Record: bank group/address and chip idAlex Kluver1-0/+8
Updates to the UEFI 2.8 Memory Error Record allow splitting the bank field into bank address and bank group, and using the last 3 bits of the extended field as a chip identifier. When needed, print correct version of bank field, bank group, and chip identification. Based on UEFI 2.8 Table 299. Memory Error Record. Signed-off-by: Alex Kluver <alex.kluver@hpe.com> Reviewed-by: Russ Anderson <russ.anderson@hpe.com> Reviewed-by: Kyle Meyer <kyle.meyer@hpe.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20200819143544.155096-3-alex.kluver@hpe.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-09-17edac,ghes,cper: Add Row Extension to Memory Error RecordAlex Kluver1-2/+14
Memory errors could be printed with incorrect row values since the DIMM size has outgrown the 16 bit row field in the CPER structure. UEFI Specification Version 2.8 has increased the size of row by allowing it to use the first 2 bits from a previously reserved space within the structure. When needed, add the extension bits to the row value printed. Based on UEFI 2.8 Table 299. Memory Error Record Signed-off-by: Alex Kluver <alex.kluver@hpe.com> Tested-by: Russ Anderson <russ.anderson@hpe.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Reviewed-by: Kyle Meyer <kyle.meyer@hpe.com> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20200819143544.155096-2-alex.kluver@hpe.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-09-17Merge branch 'for-5.10-drm-sg-fix' of https://github.com/mszyprow/linux into drm-nextDave Airlie1-0/+2
Please pull a set of fixes for various DRM drivers that finally resolve incorrect usage of the scatterlists (struct sg_table nents and orig_nents entries), what causes issues when IOMMU is used. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200910080505.24456-1-m.szyprowski@samsung.com
2020-09-16rcu-tasks: Fix grace-period/unlock race in RCU Tasks TracePaul E. McKenney1-0/+4
The more intense grace-period processing resulting from the 50x RCU Tasks Trace grace-period speedups exposed the following race condition: o Task A running on CPU 0 executes rcu_read_lock_trace(), entering a read-side critical section. o When Task A eventually invokes rcu_read_unlock_trace() to exit its read-side critical section, this function notes that the ->trc_reader_special.s flag is zero and and therefore invoke wil set ->trc_reader_nesting to zero using WRITE_ONCE(). But before that happens... o The RCU Tasks Trace grace-period kthread running on some other CPU interrogates Task A, but this fails because this task is currently running. This kthread therefore sends an IPI to CPU 0. o CPU 0 receives the IPI, and thus invokes trc_read_check_handler(). Because Task A has not yet cleared its ->trc_reader_nesting counter, this function sees that Task A is still within its read-side critical section. This function therefore sets the ->trc_reader_nesting.b.need_qs flag, AKA the .need_qs flag. Except that Task A has already checked the .need_qs flag, which is part of the ->trc_reader_special.s flag. The .need_qs flag therefore remains set until Task A's next rcu_read_unlock_trace(). o Task A now invokes synchronize_rcu_tasks_trace(), which cannot start a new grace period until the current grace period completes. And thus cannot return until after that time. But Task A's .need_qs flag is still set, which prevents the current grace period from completing. And because Task A is blocked, it will never execute rcu_read_unlock_trace() until its call to synchronize_rcu_tasks_trace() returns. We are therefore deadlocked. This race is improbable, but 80 hours of rcutorture made it happen twice. The race was possible before the grace-period speedup, but roughly 50x less probable. Several thousand hours of rcutorture would have been necessary to have a reasonable chance of making this happen before this 50x speedup. This commit therefore eliminates this deadlock by setting ->trc_reader_nesting to a large negative number before checking the .need_qs and zeroing (or decrementing with respect to its initial value) ->trc_reader_nesting. For its part, the IPI handler's trc_read_check_handler() function adds a check for negative values, deferring evaluation of the task in this case. Taken together, these changes avoid this deadlock scenario. Fixes: 276c410448db ("rcu-tasks: Split ->trc_reader_need_end") Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <bpf@vger.kernel.org> Cc: <stable@vger.kernel.org> # 5.7.x Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-09-16fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGSKrzysztof Wilczyński1-1/+1
The O_NDELAY flag occurs twice in the VALID_OPEN_FLAGS definition, this change removes the duplicate. There is no change to the functionality. Note, that the flags O_NONBLOCK and O_NDELAY are not duplicates, as values of these flags are platform dependent, and on platforms like Sparc O_NONBLOCK and O_NDELAY are not the same. This has been done that way to maintain the ABI compatibility with Solaris since the Sparc port was first introduced. This change resolves the following Coccinelle warning: include/linux/fcntl.h:11:13-21: duplicated argument to & or | Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-16fs: fix cast in fsparam_u32hex() macroAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-16Merge tag 'mlx5-updates-2020-09-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller2-2/+2
Saeed Mahameed says: ==================== mlx5-updates-2020-09-15 Various updates to mlx5 driver, 1) Eli adds support for TC trap action. 2) Eran, minor improvements to clock.c code structure 3) Better handling of error reporting in LAG from Jianbo 4) IPv6 traffic class (DSCP) header rewrite support from Maor 5) Ofer Levi adds support for CQE compression of multi-strides packets 6) Vu, Enables use of vport meta data by default. 7) Some minor code cleanup ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16iio: adis: Drop non Managed device functionsNuno Sá1-27/+0
Drop `adis_setup_buffer_and_trigger()`. All users were updated to use the devm version of this function. This avoids having almost the same code repeated. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20200915120258.161587-11-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-16cpuidle: Allow cpuidle drivers to take over RCU-idlePeter Zijlstra1-0/+1
Some drivers have to do significant work, some of which relies on RCU still being active. Instead of using RCU_NONIDLE in the drivers and flipping RCU back on, allow drivers to take over RCU-idle duty. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-16efi: Support for MOK variable config tableLenny Szubowicz1-0/+34
Because of system-specific EFI firmware limitations, EFI volatile variables may not be capable of holding the required contents of the Machine Owner Key (MOK) certificate store when the certificate list grows above some size. Therefore, an EFI boot loader may pass the MOK certs via a EFI configuration table created specifically for this purpose to avoid this firmware limitation. An EFI configuration table is a much more primitive mechanism compared to EFI variables and is well suited for one-way passage of static information from a pre-OS environment to the kernel. This patch adds initial kernel support to recognize, parse, and validate the EFI MOK configuration table, where named entries contain the same data that would otherwise be provided in similarly named EFI variables. Additionally, this patch creates a sysfs binary file for each EFI MOK configuration table entry found. These files are read-only to root and are provided for use by user space utilities such as mokutil. A subsequent patch will load MOK certs into the trusted platform key ring using this infrastructure. Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Link: https://lore.kernel.org/r/20200905013107.10457-2-lszubowi@redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-09-16misc: fastrpc: add ioctl for attaching to sensors pdJonathan Marek1-0/+1
Initializing sensors requires attaching to pd 2. Add an ioctl for that. This corresponds to FASTRPC_INIT_ATTACH_SENSORS in the downstream driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200908131013.19630-4-jonathan@marek.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16misc: fastrpc: fix indentation error in uapi headerJonathan Marek1-2/+2
Use tabs instead of spaces. Fixes: 2419e55e532d ("misc: fastrpc: add mmap/unmap support") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200908131013.19630-2-jonathan@marek.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectableThomas Gleixner1-5/+26
The arch_.*_msi_irq[s] fallbacks are compiled in whether an architecture requires them or not. Architectures which are fully utilizing hierarchical irq domains should never call into that code. It's not only architectures which depend on that by implementing one or more of the weak functions, there is also a bunch of drivers which relies on the weak functions which invoke msi_controller::setup_irq[s] and msi_controller::teardown_irq. Make the architectures and drivers which rely on them select them in Kconfig and if not selected replace them by stub functions which emit a warning and fail the PCI/MSI interrupt allocation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200826112333.992429909@linutronix.de
2020-09-16iommm/vt-d: Store irq domain in struct deviceThomas Gleixner1-0/+7
As a first step to make X86 utilize the direct MSI irq domain operations store the irq domain pointer in the device struct when a device is probed. This is done from dmar_pci_bus_add_dev() because it has to work even when DMA remapping is disabled. It only overrides the irqdomain of devices which are handled by a regular PCI/MSI irq domain which protects PCI devices behind special busses like VMD which have their own irq domain. No functional change. It just avoids the redirection through arch_*_msi_irqs() and allows the PCI/MSI core to directly invoke the irq domain alloc/free functions instead of having to look up the irq domain for every single MSI interupt. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112333.714566121@linutronix.de
2020-09-16irqdomain/msi: Allow to override msi_domain_alloc/free_irqs()Thomas Gleixner1-0/+27
To support MSI irq domains which do not fit at all into the regular MSI irqdomain scheme, like the XEN MSI interrupt management for PV/HVM/DOM0, it's necessary to allow to override the alloc/free implementation. This is a preperatory step to switch X86 away from arch_*_msi_irqs() and store the irq domain pointer right in struct device. No functional change for existing MSI irq domain users. Aside of the evil XEN wrapper this is also useful for special MSI domains which need to do extra alloc/free work before/after calling the generic core function. Work like allocating/freeing MSI descriptors, MSI storage space etc. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200826112333.526797548@linutronix.de
2020-09-16PCI/MSI: Provide pci_dev_has_special_msi_domain() helperThomas Gleixner1-0/+1
Provide a helper function to check whether a PCI device is handled by a non-standard PCI/MSI domain. This will be used to exclude such devices which hang of a special bus, e.g. VMD, to be excluded from the irq domain override in irq remapping. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200826112333.139387358@linutronix.de
2020-09-16irqdomain/msi: Provide DOMAIN_BUS_VMD_MSIThomas Gleixner1-0/+1
PCI devices behind a VMD bus are not subject to interrupt remapping, but the irq domain for VMD MSI cannot be distinguished from a regular PCI/MSI irq domain. Add a new domain bus token and allow it in the bus token check in msi_check_reservation_mode() to keep the functionality the same once VMD uses this token. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Jon Derrick <jonathan.derrick@intel.com> Link: https://lore.kernel.org/r/20200826112332.954409970@linutronix.de
2020-09-16x86/msi: Use generic MSI domain opsThomas Gleixner1-1/+0
pci_msi_get_hwirq() and pci_msi_set_desc are not longer special. Enable the generic MSI domain ops in the core and PCI MSI code unconditionally and get rid of the x86 specific implementations in the X86 MSI code and in the hyperv PCI driver. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200826112332.564274859@linutronix.de
2020-09-16PCI/MSI: Rework pci_msi_domain_calc_hwirq()Thomas Gleixner1-2/+1
Retrieve the PCI device from the msi descriptor instead of doing so at the call sites. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200826112332.352583299@linutronix.de
2020-09-16seqlock: Unbreak lockdeppeterz@infradead.org1-8/+14
seqcount_LOCKNAME_init() needs to be a macro due to the lockdep annotation in seqcount_init(). Since a macro cannot define another macro, we need to effectively revert commit: e4e9ab3f9f91 ("seqlock: Fold seqcount_LOCKNAME_init() definition"). Fixes: e4e9ab3f9f91 ("seqlock: Fold seqcount_LOCKNAME_init() definition") Reported-by: Qian Cai <cai@redhat.com> Debugged-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Qian Cai <cai@redhat.com> Link: https://lkml.kernel.org/r/20200915143028.GB2674@hirez.programming.kicks-ass.net
2020-09-16locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_countHou Tao1-4/+4
The __this_cpu*() accessors are (in general) IRQ-unsafe which, given that percpu-rwsem is a blocking primitive, should be just fine. However, file_end_write() is used from IRQ context and will cause load-store issues on architectures where the per-cpu accessors are not natively irq-safe. Fix it by using the IRQ-safe this_cpu_*() for operations on read_count. This will generate more expensive code on a number of platforms, which might cause a performance regression for some of the other percpu-rwsem users. If any such is reported, we can consider alternative solutions. Fixes: 70fe2f48152e ("aio: fix freeze protection of aio writes") Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lkml.kernel.org/r/20200915140750.137881-1-houtao1@huawei.com
2020-09-16ipmi: add retry in try_get_dev_id()Xianting Tian1-0/+2
Use a retry machanism to give the BMC more opportunities to correctly respond when we receive specific completion codes. This is similar to what is done in __get_device_id(). Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Message-Id: <20200916062129.26129-1-tian.xianting@h3c.com> [Moved GET_DEVICE_ID_MAX_RETRY to include/linux/ipmi.h, reworded some text.] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-09-16phy: Add new PHY attribute max_link_rateSwapnil Jakhade1-0/+2
Add new PHY attribute max_link_rate to struct phy_attrs. This indicates maximum link rate supported by PHY (in Mbps). Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/1599805114-22063-2-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16sched/topology: Allow archs to override cpu_smt_maskSrikar Dronamraju1-1/+1
cpu_smt_mask tracks topology_sibling_cpumask. This would be good for most architectures. One of the users of cpu_smt_mask(), would be to identify idle-cores. On Power9, a pair of SMT4 cores can be presented by the firmware as a SMT8 core for backward compatibility reasons. powerpc allows LPARs to be live migrated from Power8 to Power9. Do note Power8 had only SMT8 cores. Existing software which has been developed/configured for Power8 would expect to see SMT8 core. Maintaining the illusion of SMT8 core is a requirement to make that work. In order to maintain above userspace backward compatibility with previous versions of processor, Power9 onwards there is option to the firmware to advertise a pair of SMT4 cores as a fused cores aka SMT8 core. On Power9 this pair shares the L2 cache as well. However, from the scheduler's point of view, a core should be determined by SMT4, since its a completely independent unit of compute. Hence allow powerpc architecture to override the default cpu_smt_mask() to point to the SMT4 cores in a SMT8 mode. This will ensure the scheduler is always given the right information. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200807074517.27957-1-srikar@linux.vnet.ibm.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.