aboutsummaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-04-28amba: Initialize dma_parms for amba devicesUlf Hansson1-0/+1
It's currently the amba driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common amba bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Russell King <linux@armlinux.org.uk> Cc: <stable@vger.kernel.org> Tested-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200422101013.31267-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28driver core: platform: Initialize dma_parms for platform devicesUlf Hansson1-0/+1
It's currently the platform driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common platform bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Suggested-by: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Tested-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200422100954.31211-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add sysfs and API to set boot health statusRajan Vaja1-0/+7
Add sysfs interface to set boot health status from user space. Add API used by this interface to communicate with firmware. If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the healthy bit on FPD WDT expiration. If healthy bit is set by a user application running in Linux, PMUFW will do APU only restart. If healthy bit is not set during FPD WDT expiration, PMUFW will do system restart. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-26-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add sysfs to set shutdown scopeRajan Vaja1-0/+12
The Linux shutdown functionality implemented via PSCI system_off does not include an option to set a scope, i.e. which parts of the system to shut down. This patch creates sysfs that allows to set the shutdown scope for the next shutdown request. When the next shutdown is performed, the platform specific portion of PSCI-system_off can use the chosen shutdown scope. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-25-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add system shutdown API interfaceRajan Vaja1-0/+6
Add system shutdown API interface which asks firmware to perform system shutdown/restart. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-24-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add sysfs interfaceRajan Vaja1-0/+2
Add firmware-ggs sysfs interface which provides read/write interface to global storage registers. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-23-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add APIs to read/write GGS/PGGS registersRajan Vaja1-0/+24
Add APIs to read/write PGGS and GGS registers. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-22-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for fpga related APIsRajan Vaja1-5/+11
Use direct function call instead of using eemi ops for fpga related APIs. Also remove eemi ops structure. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-21-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for aes engineRajan Vaja1-1/+5
Use direct function call for aes engine instead of using eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-20-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for set_requirementRajan Vaja1-4/+10
Use direct function call instead of using eemi ops for set_requirement. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-19-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for release_nodeRajan Vaja1-1/+5
Use direct function call instead of using eemi ops for release_node. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-18-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for request_nodeRajan Vaja1-4/+8
Use direct function call instead of using eemi ops for request_node. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-17-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for set_suspend_modeRajan Vaja1-1/+5
Use direct function call instead of eemi ops for set_suspend_mode. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-16-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for init_finalizeRajan Vaja1-1/+5
Use direct function call instead of eemi ops for init_finalize. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-15-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for reset_get_statusRajan Vaja1-1/+6
Use direct function call instead of using eemi ops for reset_get_status. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-14-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for reset_assertRajan Vaja1-2/+7
Use direct function call instead of using eemi ops for reset_assert. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-13-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Use APIs instead of IOCTLsRajan Vaja1-1/+30
Remove IOCTL API and use individual APIs for better readability. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-12-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock set/get parentRajan Vaja1-2/+10
Use direct function call instead of eemi ops for clock set/get parent. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-11-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock set/get rateRajan Vaja1-2/+10
Use direct function call instead of eemi ops for clock set/get rate. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-10-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_getdividerRajan Vaja1-1/+5
Use direct function call instead of using eemi ops for clock_getdivider. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-9-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_setdividerRajan Vaja1-1/+5
Use direct function call instead of using eemi ops for clock_setdivider. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-8-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_getstateRajan Vaja1-1/+5
Use direct function call instead of eemi ops for clock_getstate. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-7-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_disableRajan Vaja1-1/+5
Use direct function call for clock_disable instead using of eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-6-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_enableRajan Vaja1-1/+5
Use direct function call for clock_enable instead of eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-5-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for query_dataRajan Vaja1-1/+6
Use direct function call for query_data instead of using eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-4-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for get_chipidRajan Vaja1-1/+5
Use direct function call instead of eemi ops for get_chipid. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-3-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for get_api_versionRajan Vaja1-1/+5
Use direct function calls instead of using eemi ops. So remove eemi ops for get_api_version and use direct function call. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-2-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: fpga: replace the error codes with the standard onesRichard Gong2-69/+51
The Intel service layer driver has defined error codes for the specific services, which started from FPGA configuration then RSU (Remote Status Update). Intel service layer driver should define the standard error codes rather than keep adding more error codes for the new services. The standard error codes will be used by all the clients of Intel service layer driver. Replace FPGA and RSU specific error codes with Intel service layer’s Common error codes. Signed-off-by: Richard Gong <richard.gong@intel.com> Link: https://lore.kernel.org/r/1586897274-307-2-git-send-email-richard.gong@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28drm: Add devm_drm_dev_alloc macroDaniel Vetter1-0/+33
Add a new macro helper to combine the usual init sequence in drivers, consisting of a kzalloc + devm_drm_dev_init + drmm_add_final_kfree triplet. This allows us to remove the rather unsightly drmm_add_final_kfree from all currently merged drivers. The kerneldoc is only added for this new function. Existing kerneldoc and examples will be udated at the very end, since once all drivers are converted over to devm_drm_dev_alloc we can unexport a lot of interim functions and make the documentation for driver authors a lot cleaner and less confusing. There will be only one true way to initialize a drm_device at the end of this, which is going to be devm_drm_dev_alloc. v2: - Actually explain what this is for in the commit message (Sam) - Fix checkpatch issues (Sam) Acked-by: Noralf Trønnes <noralf@tronnes.org> Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-2-daniel.vetter@ffwll.ch
2020-04-28bus: mhi: core: Add support for MHI suspend and resumeManivannan Sadhasivam1-0/+19
Add support for MHI suspend and resume states. While at it, the mhi_notify() function needs to be exported as well. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200427075829.9304-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28Bluetooth: Adding driver and quirk defs for multi-role LEAlain Michaud1-0/+9
This change adds the relevant driver and quirk to allow drivers to report the le_states as being trustworthy. This has historically been disabled as controllers did not reliably support this. In particular, this will be used to relax this condition for controllers that have been well tested and reliable. /* Most controller will fail if we try to create new connections * while we have an existing one in slave role. */ if (hdev->conn_hash.le_num_slave > 0) return NULL; Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-28drm/tegra: Fix SMMU support on Tegra124 and Tegra210Thierry Reding1-0/+3
When testing whether or not to enable the use of the SMMU, consult the supported DMA mask rather than the actually configured DMA mask, since the latter might already have been restricted. Fixes: 2d9384ff9177 ("drm/tegra: Relax IOMMU usage criteria on old Tegra") Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-04-28xfrm: add IPv6 support for espintcpSabrina Dubroca1-0/+2
This extends espintcp to support IPv6, building on the existing code and the new UDPv6 encapsulation support. Most of the code is either reused directly (stream parser, ULP) or very similar to the IPv4 variant (net/ipv6/esp6.c changes). The separation of config options for IPv4 and IPv6 espintcp requires a bit of Kconfig gymnastics to enable the core code. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-04-28xfrm: add support for UDPv6 encapsulation of ESPSabrina Dubroca2-0/+8
This patch adds support for encapsulation of ESP over UDPv6. The code is very similar to the IPv4 encapsulation implementation, and allows to easily add espintcp on IPv6 as a follow-up. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-04-28x86/tboot: Mark tboot staticChristoph Hellwig1-7/+1
This structure is only really used in tboot.c. The only exception is a single tboot_enabled check, but for that we don't need an inline function. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200428051703.1625952-1-hch@lst.de
2020-04-28clk: renesas: Add r8a7742 CPG Core Clock DefinitionsLad Prabhakar1-0/+42
Add all RZ/G1H Clock Pulse Generator Core Clock Outputs, as listed in Table 7.2a ("List of Clocks [RZ/G1H]") of the RZ/G1 Hardware User's Manual. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1587678050-23468-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-28dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macrosLad Prabhakar1-0/+29
Add power domain indices for RZ/G1H (R8A7742) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1587678050-23468-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-28mtd: spi-nor: fix kernel-doc for spi_nor::spimemSergei Shtylyov1-1/+1
When adding the 'spimem' field to 'struct spi_nor', a grammar mistake ("point" instead of "pointer") was made -- fix it and convert the SPI acronym to uppercase and fully spell out "memory", while at it... Fixes: b35b9a10362 ("mtd: spi-nor: Move m25p80 code in spi-nor.c") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-04-28mtd: spi-nor: fix kernel-doc for spi_nor::infoSergei Shtylyov1-1/+1
When adding the 'info' field to 'struct spi_nor', some acronyms were in lower case and some in upper case and the JEDEC acronym mistyped -- fix these issues. Fixes: 46dde01f6bab ("mtd: spi-nor: add spi_nor_init() function") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-04-28mtd: spi-nor: fix kernel-doc for spi_nor::reg_protoSergei Shtylyov1-1/+1
When adding the '{read|write|reg}_proto' fields to 'struct spi_nor', a colon was missed in the comment for the spi_nor::reg_proto' -- add it. Fixes: cfc5604c488c ("mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-04-28mtd: spi-nor: fix kernel-doc for spi_nor::mtdSergei Shtylyov1-1/+1
When embedding 'struct mtd_info' within 'struct spi_nor', the kernel-doc comment was forgotten. Fix it by dropping the "pointer to" part from the comment. Fixes: 1976367173a4 ("mtd: spi-nor: embed struct mtd_info within struct spi_nor") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-04-28mtd: spi-nor: fix kernel-doc for 'struct spi_nor'Sergei Shtylyov1-4/+4
When introducing 'struct spi_nor', a number of issues was added in its kernel-doc comment: - double article in the heading kernel-doc comment; - "point" instead of "pointer" for the 'mtd' and 'dev' fields; - "a" articles instead of "an" for the 'dev' field; - acronyms in the lower case for the 'dev' field; - missing "pointer to" for the 'priv' field. Fix all of those at once... Fixes: 6e602ef73334 ("mtd: spi-nor: add the basic data structures") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-04-28netfilter: nft_nat: add netmap supportPablo Neira Ayuso1-1/+3
This patch allows you to NAT the network address prefix onto another network address prefix, a.k.a. netmapping. Userspace must specify the NF_NAT_RANGE_NETMAP flag and the prefix address through the NFTA_NAT_REG_ADDR_MIN and NFTA_NAT_REG_ADDR_MAX netlink attributes. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-04-27audit: log audit netlink multicast bind and unbindRichard Guy Briggs1-0/+1
Log information about programs connecting to and disconnecting from the audit netlink multicast socket. This is needed so that during investigations a security officer can tell who or what had access to the audit trail. This helps to meet the FAU_SAR.2 requirement for Common Criteria. Here is the systemd startup event: type=PROCTITLE msg=audit(2020-04-22 10:10:21.787:10) : proctitle=/init type=SYSCALL msg=audit(2020-04-22 10:10:21.787:10) : arch=x86_64 syscall=bind success=yes exit=0 a0=0x19 a1=0x555f4aac7e90 a2=0xc a3=0x7ffcb792ff44 items=0 ppid=0 pid=1 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=unset comm=systemd exe=/usr/lib/systemd/systemd subj=kernel key=(null) type=UNKNOWN[1335] msg=audit(2020-04-22 10:10:21.787:10) : pid=1 uid=root auid=unset tty=(none) ses=unset subj=kernel comm=systemd exe=/usr/lib/systemd/systemd nl-mcgrp=1 op=connect res=yes And events from the test suite that just uses close(): type=PROCTITLE msg=audit(2020-04-22 11:47:08.501:442) : proctitle=/usr/bin/perl -w amcast_joinpart/test type=SYSCALL msg=audit(2020-04-22 11:47:08.501:442) : arch=x86_64 syscall=bind success=yes exit=0 a0=0x7 a1=0x563004378760 a2=0xc a3=0x0 items=0 ppid=815 pid=818 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=ttyS0 ses=1 comm=perl exe=/usr/bin/perl subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=UNKNOWN[1335] msg=audit(2020-04-22 11:47:08.501:442) : pid=818 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=connect res=yes type=UNKNOWN[1335] msg=audit(2020-04-22 11:47:08.501:443) : pid=818 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=disconnect res=yes And the events from the test suite using setsockopt with NETLINK_DROP_MEMBERSHIP: type=PROCTITLE msg=audit(2020-04-22 11:39:53.291:439) : proctitle=/usr/bin/perl -w amcast_joinpart/test type=SYSCALL msg=audit(2020-04-22 11:39:53.291:439) : arch=x86_64 syscall=bind success=yes exit=0 a0=0x7 a1=0x5560877c2d20 a2=0xc a3=0x0 items=0 ppid=772 pid=775 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=ttyS0 ses=1 comm=perl exe=/usr/bin/perl subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=UNKNOWN[1335] msg=audit(2020-04-22 11:39:53.291:439) : pid=775 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=connect res=yes type=PROCTITLE msg=audit(2020-04-22 11:39:53.292:440) : proctitle=/usr/bin/perl -w amcast_joinpart/test type=SYSCALL msg=audit(2020-04-22 11:39:53.292:440) : arch=x86_64 syscall=setsockopt success=yes exit=0 a0=0x7 a1=SOL_NETLINK a2=0x2 a3=0x7ffc8366f000 items=0 ppid=772 pid=775 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=ttyS0 ses=1 comm=perl exe=/usr/bin/perl subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=UNKNOWN[1335] msg=audit(2020-04-22 11:39:53.292:440) : pid=775 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=disconnect res=yes Please see the upstream issue tracker at https://github.com/linux-audit/audit-kernel/issues/28 With the feature description at https://github.com/linux-audit/audit-kernel/wiki/RFE-Audit-Multicast-Socket-Join-Part The testsuite support is at https://github.com/rgbriggs/audit-testsuite/compare/ghak28-mcast-part-join https://github.com/linux-audit/audit-testsuite/pull/93 And the userspace support patch is at https://github.com/linux-audit/audit-userspace/pull/114 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-04-27Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds1-2/+2
Pull Hyper-V fixes from Wei Liu: - Two patches from Dexuan fixing suspension bugs - Three cleanup patches from Andy and Michael * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyper-v: Remove internal types from UAPI header hyper-v: Use UUID API for exporting the GUID x86/hyperv: Suspend/resume the VP assist page for hibernation Drivers: hv: Move AEOI determination to architecture dependent code Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM
2020-04-27netfilter: nf_tables: allow up to 64 bytes in the set element data areaPablo Neira Ayuso1-0/+4
So far, the set elements could store up to 128-bits in the data area. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-04-27drm/dp_mst: Kill the second sideband tx slot, save the worldLyude Paul1-21/+8
While we support using both tx slots for sideband transmissions, it appears that DisplayPort devices in the field didn't end up doing a very good job of supporting it. From section 5.2.1 of the DP 2.0 specification: There are MST Sink/Branch devices in the field that do not handle interleaved message transactions. To facilitate message transaction handling by downstream devices, an MST Source device shall generate message transactions in an atomic manner (i.e., the MST Source device shall not concurrently interleave multiple message transactions). Therefore, an MST Source device shall clear the Message_Sequence_No value in the Sideband_MSG_Header to 0. This might come as a bit of a surprise since the vast majority of hubs will support using both tx slots even if they don't support interleaved message transactions, and we've also been using both tx slots since MST was introduced into the kernel. However, there is one device we've had trouble getting working consistently with MST for so long that we actually assumed it was just broken: the infamous Dell P2415Qb. Previously this monitor would appear to work sometimes, but in most situations would end up timing out LINK_ADDRESS messages almost at random until you power cycled the whole display. After reading section 5.2.1 in the DP 2.0 spec, some closer investigation into this infamous display revealed it was only ever timing out on sideband messages in the second TX slot. Sure enough, avoiding the second TX slot has suddenly made this monitor function perfectly for the first time in five years. And since they explicitly mention this in the specification, I doubt this is the only monitor out there with this issue. This might even explain explain the seemingly harmless garbage sideband responses we would occasionally see with MST hubs! So - rewrite our sideband TX handlers to only support one TX slot. In order to simplify our sideband handling now that we don't support transmitting to multiple MSTBs at once, we also move all state tracking for down replies from mstbs to the topology manager. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Sean Paul <sean@poorly.run> Cc: "Lin, Wayne" <Wayne.Lin@amd.com> Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200424181308.770749-1-lyude@redhat.com
2020-04-27interconnect: Add devm_of_icc_get() as exported API for usersAkash Asthana1-0/+7
Users can use devm version of of_icc_get() to benefit from automatic resource release. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1586946198-13912-2-git-send-email-akashast@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-27switchdev: mrp: Extend switchdev API to offload MRPHoratiu Vultur1-0/+62
Extend switchdev API to add support for MRP. The HW is notified in following cases: SWITCHDEV_OBJ_ID_MRP: This is used when a MRP instance is added/removed from the MRP ring. SWITCHDEV_OBJ_ID_RING_ROLE_MRP: This is used when the role of the node changes. The current supported roles are MRM and MRC. SWITCHDEV_OBJ_ID_RING_TEST_MRP: This is used when to start/stop sending MRP_Test frames on the mrp ring ports. This is called only on nodes that have the role MRM. In case this fails then the SW will generate the frames. SWITCHDEV_OBJ_ID_RING_STATE_STATE: This is used when the ring changes it states to open or closed. This is required to notify HW because the MRP_Test frame contains the field MRP_InState which contains this information. SWITCHDEV_ATTR_ID_MRP_PORT_STATE: This is used when the port's state is changed. It can be in blocking/forwarding mode. SWITCHDEV_ATTR_ID_MRP_PORT_ROLE: This is used when port's role changes. The roles of the port can be primary/secondary. This is required to notify HW because the MRP_Test frame contains the field MRP_PortRole that contains this information. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27net: bridge: Add port attribute IFLA_BRPORT_MRP_RING_OPENHoratiu Vultur1-0/+1
This patch adds a new port attribute, IFLA_BRPORT_MRP_RING_OPEN, which allows to notify the userspace when the port lost the continuite of MRP frames. This attribute is set by kernel whenever the SW or HW detects that the ring is being open or closed. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.