| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the Qualcomm vendor ID to pci_ids.h and use it in quirks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Average ack rssi will be given to userspace via NL80211 interface
if firmware is capable. Userspace tool ‘iw’ can process this
information and give the output as one of the fields in
‘iw dev wlanX station dump’.
Example output :
localhost ~ #iw dev wlan-5000mhz station dump Station
34:f3:9a:aa:3b:29 (on wlan-5000mhz)
inactive time: 5370 ms
rx bytes: 85321
rx packets: 576
tx bytes: 14225
tx packets: 71
tx retries: 0
tx failed: 2
beacon loss: 0
rx drop misc: 0
signal: -54 dBm
signal avg: -53 dBm
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
avg ack signal: -56 dBm
authorized: yes
authenticated: yes
associated: yes
preamble: short
WMM/WME: yes
MFP: no
TDLS peer: no
DTIM period: 2
beacon interval:100
short preamble: yes
short slot time:yes
connected time: 203 seconds
Main use case is to measure the signal strength of a connected station
to AP. Data packet transmit rates and bandwidth used by station can vary
a lot even if the station is at fixed location, especially if the rates
used are multi stream(2stream, 3stream) rates with different bandwidth(20/40/80 Mhz).
These multi stream rates are sensitive and station can use different transmit power
for each of the rate and bandwidth combinations. RSSI measured from these RX packets
on AP will be not stable and can vary a lot with in a short time.
Whereas 802.11 ack frames from station are sent relatively at a constant
rate (6/12/24 Mbps) with constant bandwidth(20 Mhz).
So average rssi of the ack packets is good and more accurate.
Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This will serve userspace entity to maintain its regulatory limitation.
More specifcally APs can use this data to calculate the WMM IE when
building: beacons, probe responses, assoc responses etc...
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Sometimes the most updated CSA counter values are known only
to the device. Add an API to pass this data to mac80211.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Solve those Sphinx warnings:
./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.sign' not described in 'iio_chan_spec'
./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.realbits' not described in 'iio_chan_spec'
./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.storagebits' not described in 'iio_chan_spec'
./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.shift' not described in 'iio_chan_spec'
./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.repeat' not described in 'iio_chan_spec'
./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.endianness' not described in 'iio_chan_spec'
./include/linux/iio/iio.h:191: WARNING: Unexpected indentation.
./include/linux/iio/iio.h:192: WARNING: Block quote ends without a blank line; unexpected unindent.
./include/linux/iio/iio.h:198: WARNING: Definition list ends without a blank line; unexpected unindent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Clean up: These functions are no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Receive completion and Reply handling are done by a BOUND
workqueue, meaning they run on only one CPU.
Posting receives is currently done in the send_request path, which
on large systems is typically done on a different CPU than the one
handling Receive completions. This results in movement of
Receive-related cachelines between the sending and receiving CPUs.
More importantly, it means that currently Receives are posted while
the transport's write lock is held, which is unnecessary and costly.
Finally, allocation of Receive buffers is performed on-demand in
the Receive completion handler. This helps guarantee that they are
allocated on the same NUMA node as the CPU that handles Receive
completions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
For clarity, report the posting and completion of Receive CQEs.
Also, the wc->byte_len field contains garbage if wc->status is
non-zero, and the vendor error field contains garbage if wc->status
is zero. For readability, don't save those fields in those cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This simplifies allocation of the generic RPC slot and xprtrdma
specific per-RPC resources.
It also makes xprtrdma more like the socket-based transports:
->buf_alloc and ->buf_free are now responsible only for send and
receive buffers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Refactor: xprtrdma needs to have better control over when RPCs are
awoken from the backlog queue, so replace xprt_free_slot with a
transport op callout.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
alloc_slot is a transport-specific op, but initializing an rpc_rqst
is common to all transports. In addition, the only part of initial-
izing an rpc_rqst that needs serialization is getting a fresh XID.
Move rpc_rqst initialization to common code in preparation for
adding a transport-specific alloc_slot to xprtrdma.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Fix 88 instances of a kernel-doc warning:
../include/net/mac80211.h:2083: warning: bad line: >
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This was used by the ide, scsi and networking code in the past to
determine if they should bounce payloads. Now that the dma mapping
always have to support dma to all physical memory (thanks to swiotlb
for non-iommu systems) there is no need to this crude hack any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv)
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
ide_toggle_bounce did select various strange block bounce limits, including
not bouncing at all as soon as an iommu is present in the system. Given
that the dma_map routines now handle any required bounce buffering except
for ISA DMA, and the ide code already must handle either ISA DMA or highmem
at least for iommu equipped systems we can get rid of the block layer
bounce limit setting entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next
tree, more relevant updates in this batch are:
1) Add Maglev support to IPVS. Moreover, store lastest server weight in
IPVS since this is needed by maglev, patches from from Inju Song.
2) Preparation works to add iptables flowtable support, patches
from Felix Fietkau.
3) Hand over flows back to conntrack slow path in case of TCP RST/FIN
packet is seen via new teardown state, also from Felix.
4) Add support for extended netlink error reporting for nf_tables.
5) Support for larger timeouts that 23 days in nf_tables, patch from
Florian Westphal.
6) Always set an upper limit to dynamic sets, also from Florian.
7) Allow number generator to make map lookups, from Laura Garcia.
8) Use hash_32() instead of opencode hashing in IPVS, from Vicent Bernat.
9) Extend ip6tables SRH match to support previous, next and last SID,
from Ahmed Abdelsalam.
10) Move Passive OS fingerprint nf_osf.c, from Fernando Fernandez.
11) Expose nf_conntrack_max through ctnetlink, from Florent Fourcot.
12) Several housekeeping patches for xt_NFLOG, x_tables and ebtables,
from Taehee Yoo.
13) Unify meta bridge with core nft_meta, then make nft_meta built-in.
Make rt and exthdr built-in too, again from Florian.
14) Missing initialization of tbl->entries in IPVS, from Cong Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPCTNL_MSG_CT_GET_STATS netlink command allow to monitor current number
of conntrack entries. However, if one wants to compare it with the
maximum (and detect exhaustion), the only solution is currently to read
sysctl value.
This patch add nf_conntrack_max value in netlink message, and simplify
monitoring for application built on netlink API.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add nf_osf_ttl() and nf_osf_match() into nf_osf.c to prepare for
nf_tables support.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
These macros allow conveniently declaring arrays which use NFT_{RT,CT}_*
values as indexes.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
IPv6 Segment Routing Header (SRH) contains a list of SIDs to be crossed
by SR encapsulated packet. Each SID is encoded as an IPv6 prefix.
When a Firewall receives an SR encapsulated packet, it should be able
to identify which node previously processed the packet (previous SID),
which node is going to process the packet next (next SID), and which
node is the last to process the packet (last SID) which represent the
final destination of the packet in case of inline SR mode.
An example use-case of using these features could be SID list that
includes two firewalls. When the second firewall receives a packet,
it can check whether the packet has been processed by the first firewall
or not. Based on that check, it decides to apply all rules, apply just
subset of the rules, or totally skip all rules and forward the packet to
the next SID.
This patch extends SRH match to support matching previous SID, next SID,
and last SID.
Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch includes a new attribute in the numgen structure to allow
the lookup of an element based on the number generator as a key.
For this purpose, different ops have been included to extend the
current numgen inc functions.
Currently, only supported for numgen incremental operations, but
it will be supported for random in a follow-up patch.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pll KVM fixes from Radim Krčmář:
"ARM:
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
x86:
- Speed up injection of expired timers (for stable)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: remove APIC Timer periodic/oneshot spikes
arm64: vgic-v2: Fix proxying of cpuif access
KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance
KVM: arm64: Fix order of vcpu_write_sys_reg() arguments
KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI
|
|
Pull USB fixes from Greg KH:
"Here are some USB driver fixes for 4.17-rc4.
The majority of them are some USB gadget fixes that missed my last
pull request. The "largest" patch in here is a fix for the old visor
driver that syzbot found 6 months or so ago and I finally remembered
to fix it.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: host: ehci: Use dma_pool_zalloc()"
usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
usb: typec: tcpm: Release the role mux when exiting
USB: Accept bulk endpoints with 1024-byte maxpacket
xhci: Fix use-after-free in xhci_free_virt_device
USB: serial: visor: handle potential invalid device configuration
USB: serial: option: adding support for ublox R410M
usb: musb: trace: fix NULL pointer dereference in musb_g_tx()
usb: musb: host: fix potential NULL pointer dereference
usb: gadget: composite Allow for larger configuration descriptors
usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue
usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static
usb: dwc2: pci: Fix error return code in dwc2_pci_probe()
usb: dwc2: WA for Full speed ISOC IN in DDMA mode.
usb: dwc2: dwc2_vbus_supply_init: fix error check
usb: gadget: f_phonet: fix pn_net_xmit()'s return type
|
|
KVM/arm fixes for 4.17, take #2
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
|
|
Just checking for ifdefs cause build issues as reported by
kernel test:
config: openrisc-allmodconfig (attached as .config)
compiler: or1k-linux-gcc (GCC) 6.0.0 20160327 (experimental)
All errors (new ones prefixed by >>):
drivers/video/fbdev/omap2/omapfb/omapfb-main.c: In function 'omapfb_init_connections':
>> drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2396:8: error: implicit declaration of function 'omapdss_find_mgr_from_display' [-Werror=implicit-function-declaration]
mgr = omapdss_find_mgr_from_display(def_dssdev);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2396:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
mgr = omapdss_find_mgr_from_display(def_dssdev);
^
drivers/video/fbdev/omap2/omapfb/omapfb-main.c: In function 'omapfb_find_default_display':
>> drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2430:13: error: implicit declaration of function 'omapdss_get_default_display_name' [-Werror=implicit-function-declaration]
def_name = omapdss_get_default_display_name();
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2430:11: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
def_name = omapdss_get_default_display_name();
^
So, use IS_ENABLED() instead.
Fixes: 771f7be87ff9 ("media: omapfb: omapfb_dss.h: add stubs to build with COMPILE_TEST && DRM_OMAP")
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This driver depends on sony-laptop driver, but this is available
only for x86. So, add a stub function, in order to allow building
it on non-x86 too.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull clk fixes froom Stephen Boyd:
"A handful of fixes for the stm32mp1 clk driver came in during the
merge window for the driver that got merged in the merge window.
Plus a warning fix for unused PM ops and a couple fixes for the meson
clk driver clk names that went unnoticed with the regmap rework.
There's also another fix in here for the mux rounding flag which
wasn't doing what it said it did, but now it does"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: meson: meson8b: fix meson8b_cpu_clk parent clock name
clk: meson: meson8b: fix meson8b_fclk_div3_div clock name
clk: meson: drop meson_aoclk_gate_regmap_ops
clk: meson: honor CLK_MUX_ROUND_CLOSEST in clk_regmap
clk: honor CLK_MUX_ROUND_CLOSEST in generic clk mux
clk: cs2000: mark resume function as __maybe_unused
clk: stm32mp1: remove ck_apb_dbg clock
clk: stm32mp1: set stgen_k clock as critical
clk: stm32mp1: add missing tzc2 clock
clk: stm32mp1: fix SAI3 & SAI4 clocks
clk: stm32mp1: remove unused dfsdm_src[] const
clk: stm32mp1: add missing static
|
|
Pull remoteproc and rpmsg fixes from Bjorn Andersson:
- fix screw-up when reversing boolean for rproc_stop()
- add missing OF node refcounting dereferences
- add missing MODULE_ALIAS in rpmsg_char
* tag 'rproc-v4.17-1' of git://github.com/andersson/remoteproc:
rpmsg: added MODULE_ALIAS for rpmsg_char
remoteproc: qcom: Fix potential device node leaks
remoteproc: fix crashed parameter logic on stop call
|
|
In preparation of adding support for the SIMD based arm64 implementation
of arm64, which requires a fallback to non-SIMD code when invoked in
certain contexts, expose the generic SM4 encrypt and decrypt routines
to other drivers.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull rdma fixes from Doug Ledford:
"This is our first pull request of the rc cycle. It's not that it's
been overly quiet, we were just waiting on a few things before sending
this off.
For instance, the 6 patch series from Intel for the hfi1 driver had
actually been pulled in on Tuesday for a Wednesday pull request, only
to have Jason notice something I missed, so we held off for some
testing, and then on Thursday had to respin the series because the
very first patch needed a minor fix (unnecessary cast is all).
There is a sizable hns patch series in here, as well as a reasonably
largish hfi1 patch series, then all of the lines of uapi updates are
just the change to the new official Linux-OpenIB SPDX tag (a bunch of
our files had what amounts to a BSD-2-Clause + MIT Warranty statement
as their license as a result of the initial code submission years ago,
and the SPDX folks decided it was unique enough to warrant a unique
tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4
and core/cache/cma updates to round out the bunch.
None of it was overly large by itself, but in the 2 1/2 weeks we've
been collecting patches, it has added up :-/.
As best I can tell, it's been through 0day (I got a notice about my
last for-next push, but not for my for-rc push, but Jason seems to
think that failure messages are prioritized and success messages not
so much). It's also been through linux-next. And yes, we did notice in
the context portion of the CMA query gid fix patch that there is a
dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage
and remove it anywhere we can.
Summary:
- Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off)
- SPDX license tag cleanups (new tag Linux-OpenIB)
- RoCE GID fixes related to default GIDs
- Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch),
mlx4, mlx5, and hfi1 (medium batch)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits)
RDMA/cma: Do not query GID during QP state transition to RTR
IB/mlx4: Fix integer overflow when calculating optimal MTT size
IB/hfi1: Fix memory leak in exception path in get_irq_affinity()
IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure
IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used
IB/hfi1: Fix loss of BECN with AHG
IB/hfi1 Use correct type for num_user_context
IB/hfi1: Fix handling of FECN marked multicast packet
IB/core: Make ib_mad_client_id atomic
iw_cxgb4: Atomically flush per QP HW CQEs
IB/uverbs: Fix kernel crash during MR deregistration flow
IB/uverbs: Prevent reregistration of DM_MR to regular MR
RDMA/mlx4: Add missed RSS hash inner header flag
RDMA/hns: Fix a couple misspellings
RDMA/hns: Submit bad wr
RDMA/hns: Update assignment method for owner field of send wqe
RDMA/hns: Adjust the order of cleanup hem table
RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set
RDMA/hns: Remove some unnecessary attr_mask judgement
RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set
...
|
|
Pull block fixes from Jens Axboe:
"A collection of fixes that should to into this release. This contains:
- Set of bcache fixes from Coly, fixing regression in patches that
went into this series.
- Set of NVMe fixes by way of Keith.
- Set of bdi related fixes, one from Jan and two from Tetsuo Handa,
fixing various issues around device addition/removal.
- Two block inflight fixes from Omar, fixing issues around the
transition to using tags for blk-mq inflight accounting that we
did a few releases ago"
* tag 'for-linus-20180504' of git://git.kernel.dk/linux-block:
bdi: Fix oops in wb_workfn()
nvmet: switch loopback target state to connecting when resetting
nvme/multipath: Fix multipath disabled naming collisions
nvme/multipath: Disable runtime writable enabling parameter
nvme: Set integrity flag for user passthrough commands
nvme: fix potential memory leak in option parsing
bdi: Fix use after free bug in debugfs_remove()
bdi: wake up concurrent wb_shutdown() callers.
bcache: use pr_info() to inform duplicated CACHE_SET_IO_DISABLE set
bcache: set dc->io_disable to true in conditional_stop_bcache_device()
bcache: add wait_for_kthread_stop() in bch_allocator_thread()
bcache: count backing device I/O error for writeback I/O
bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error()
bcache: store disk name in struct cache and struct cached_dev
blk-mq: fix sysfs inflight counter
blk-mq: count allocated but not started requests in iostats inflight
|
|
Switch to SPDX licensing and drop the GPL text which comes redundant.
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
i.MX6SX has lvds2 (analog clock2), an I/O clock like lvds1.
And this lvds2, along with lvds1, can be used to provide
external clock source to the internal pll, such as pll4_audio
and pll5_video.
This patch mainly adds the lvds2 to the clock tree and fix its
relationship with pll accordingly.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This slipped through the cracks in the followup set to the fib6_info flip.
Rename rt6_next to fib6_next.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The migitation control is simpler to implement in architecture code as it
avoids the extra function call to check the mode. Aside of that having an
explicit seccomp enabled mode in the architecture mitigations would require
even more workarounds.
Move it into architecture code and provide a weak function in the seccomp
code. Remove the 'which' argument as this allows the architecture to decide
which mitigations are relevant for seccomp.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
If a seccomp user is not interested in Speculative Store Bypass mitigation
by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when
adding filters.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
For certain use cases it is desired to enforce mitigations so they cannot
be undone afterwards. That's important for loader stubs which want to
prevent a child from disabling the mitigation again. Will also be used for
seccomp(). The extra state preserving of the prctl state for SSB is a
preparatory step for EBPF dymanic speculation control.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
BPF_MAP_TYPE_PERF_EVENT_ARRAY is special as far as offload goes.
The map only holds glue to perf ring, not actual data. Allow
non-offloaded perf event arrays to be used in offloaded programs.
Offload driver can extract the events from HW and put them in
the map for user space to retrieve.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Right now the LSM labels for socketpairs are always uninitialized,
since there is no security hook for the socketpair() syscall. This
patch adds the required hooks so LSMs can properly label socketpairs.
This allows SO_PEERSEC to return useful information on those sockets.
Note that the behavior of socketpair() can be emulated by creating a
listener socket, connecting to it, and then discarding the initial
listener socket. With this workaround, SO_PEERSEC would return the
caller's security context. However, with socketpair(), the uninitialized
context is returned unconditionally. This is unexpected and makes
socketpair() less useful in situations where the security context is
crucial to the application.
With the new socketpair-hook this disparity can be solved by making
socketpair() return the expected security context.
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Newer DVB receivers of this type have a different USB PID.
Signed-off-by: Rainer Keller <mail@rainerkeller.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
It adds support for BCM89610 (Single-Port 10/100/1000BASE-T)
transceiver which is used in P3310 Tegra186 platform.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull media fixes from Mauro Carvalho Chehab:
- a trivial one-line fix addressing a PTR_ERR() getting value from a
wrong var at imx driver
- a patch changing my e-mail at the Kernel tree to mchehab@kernel.org.
no code changes
* tag 'media/v4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
MAINTAINERS & files: Canonize the e-mails I use at files
media: imx-media-csi: Fix inconsistent IS_ERR and PTR_ERR
|
|
The H6 has clock/reset controls in PRCM part, like old SoCs such as H3
and A64. However, the PRCM CCU is rearranged; the register arragement
is now similar to the main CCU of H6, and the PRCM now has two APB
buses to control -- one is clocked from AHB clock derivde from AR100
clock, the other is clocked from the same mux with AR100 clock.
Therefore a new driver is written for it.
As there's no official document about the PRCM in H6, all the information
are indirectly collected from BSP and parts of the document, and the
information source is noted as comments in the driver's source code. If
reliable information is provided furtherly, the driver needs to be
rechecked.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Videobuf has been replaced by videobuf2. Now, no drivers use
the videobuf-dvb helper module anymore. So, get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Overlapping changes in selftests Makefile.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add stubs for omapfb_dss.h, in the case it is included by
some driver when CONFIG_FB_OMAP2 is not defined, with can
happen on ARM when DRM_OMAP is not 'n'.
That allows building such driver(s) with COMPILE_TEST.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
MT7622's hardware default value of vendor ID and class type is not correct,
fix that by setup the correct values before linkup with Endpoint.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
|
|
From now on, I'll start using my @kernel.org as my development e-mail.
As such, let's remove the entries that point to the old
mchehab@s-opensource.com at MAINTAINERS file.
For the files written with a copyright with mchehab@s-opensource,
let's keep Samsung on their names, using mchehab+samsung@kernel.org,
in order to keep pointing to my employer, with sponsors the work.
For the files written before I join Samsung (on July, 4 2013),
let's just use mchehab@kernel.org.
For bug reports, we can simply point to just kernel.org, as
this will reach my mchehab+samsung inbox anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Brian Warner <brian.warner@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
Bjorn Helgaas
Balaji Pothunoori
Haim Dreyfuss
Gregory Greenman
Mauro Carvalho Chehab
Chuck Lever
Randy Dunlap
Christoph Hellwig
David S. Miller
Florent Fourcot
Fernando Fernandez Mancera
Phil Sutter
Florian Westphal
Ahmed Abdelsalam
Laura Garcia Liebana
Linus Torvalds
Radim Krčmář
Mauro Carvalho Chehab
Ingo Molnar
Ard Biesheuvel
Lokesh Vutla
Anson Huang
David Ahern
Thomas Gleixner
Kees Cook
Jakub Kicinski
David Herrmann
Rainer Keller
Bhadram Varka
Icenowy Zheng
Honghui Zhang