| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The DSA switch MDB ops pass the switchdev_trans structure down to the
drivers, but no one is using them and they aren't supposed to anyway.
Remove the trans argument from MDB prepare and add operations.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DSA switch VLAN ops pass the switchdev_trans structure down to the
drivers, but no one is using them and they aren't supposed to anyway.
Remove the trans argument from VLAN prepare and add operations.
At the same time, fix the following checkpatch warning:
WARNING: line over 80 characters
#74: FILE: drivers/net/dsa/dsa_loop.c:177:
+ const struct switchdev_obj_port_vlan *vlan)
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some drivers enforce that flags on program replacement and
removal must match the flags passed on install. This leaves
the possibility open to enable simultaneous loading
of XDP programs both to HW and DRV.
Allow such drivers to report the flags back to the stack.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The output parameters will get unwieldy if we want to add more
information about the program. Simply pass the entire
struct netdev_bpf in.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
General support for state persistence is added to gpiolib with the
introduction of a new pinconf parameter to propagate the request to
hardware. The existing persistence support for sleep is adapted to
include hardware support if the GPIO driver provides it. Persistence
continues to be enabled by default; in-kernel consumers can opt out, but
userspace (currently) does not have a choice.
The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are
renamed, dropping the SLEEP prefix to reflect that the concept is no
longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE
could initially be misinterpreted, so I've further changed the symbols
to *_TRANSITORY and *_PERSISTENT to address this.
The sysfs interface is modified only to keep consistency with the
chardev interface in enforcing persistence for userspace exports.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The GPIO core provides a handy GPIO_LOOKUP() macro to populate a struct
gpiod_lookup array without having to spell out attribute names (but
still avoid breakage when attributes within the struct are rearranged
or added).
The axp288_adc.c driver uses a similar macro to populate a struct
iio_map array. Make it available to others.
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADC driver can trigger on either the timer or the lptim
trigger, but it only uses a Kconfig 'select' statement
to ensure that the first of the two is present. When the lptim
trigger is enabled as a loadable module, and the adc driver
is built-in, we now get a link error:
drivers/iio/adc/stm32-adc.o: In function `stm32_adc_get_trig_extsel':
stm32-adc.c:(.text+0x4e0): undefined reference to `is_stm32_lptim_trigger'
We could use a second 'select' statement and always have both
trigger drivers enabled when the adc driver is, but it seems that
the lptimer trigger was intentionally left optional, so it seems
better to keep it that way.
This adds a hack to use 'IS_REACHABLE()' rather than 'IS_ENABLED()',
which avoids the link error, but instead leads to the lptimer trigger
not being used in the broken configuration. I've added a runtime
warning for this case to help users figure out what they did wrong
if this should ever be done by accident.
Fixes: f0b638a7f6db ("iio: adc: stm32: add support for lptimer triggers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Pull RISC-V cleanups and ABI fixes from Palmer Dabbelt:
"This contains a handful of small cleanups that are a result of
feedback that didn't make it into our original patch set, either
because the feedback hadn't been given yet, I missed the original
emails, or we weren't ready to submit the changes yet.
I've been maintaining the various cleanup patch sets I have as their
own branches, which I then merged together and signed. Each merge
commit has a short summary of the changes, and each branch is based on
your latest tag (4.15-rc1, in this case). If this isn't the right way
to do this then feel free to suggest something else, but it seems sane
to me.
Here's a short summary of the changes, roughly in order of how
interesting they are.
- libgcc.h has been moved from include/lib, where it's the only
member, to include/linux. This is meant to avoid tab completion
conflicts.
- VDSO entries for clock_get/gettimeofday/getcpu have been added.
These are simple syscalls now, but we want to let glibc use them
from the start so we can make them faster later.
- A VDSO entry for instruction cache flushing has been added so
userspace can flush the instruction cache.
- The VDSO symbol versions for __vdso_cmpxchg{32,64} have been
removed, as those VDSO entries don't actually exist.
- __io_writes has been corrected to respect the given type.
- A new READ_ONCE in arch_spin_is_locked().
- __test_and_op_bit_ord() is now actually ordered.
- Various small fixes throughout the tree to enable allmodconfig to
build cleanly.
- Removal of some dead code in our atomic support headers.
- Improvements to various comments in our atomic support headers"
* tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux: (23 commits)
RISC-V: __io_writes should respect the length argument
move libgcc.h to include/linux
RISC-V: Clean up an unused include
RISC-V: Allow userspace to flush the instruction cache
RISC-V: Flush I$ when making a dirty page executable
RISC-V: Add missing include
RISC-V: Use define for get_cycles like other architectures
RISC-V: Provide stub of setup_profiling_timer()
RISC-V: Export some expected symbols for modules
RISC-V: move empty_zero_page definition to C and export it
RISC-V: io.h: type fixes for warnings
RISC-V: use RISCV_{INT,SHORT} instead of {INT,SHORT} for asm macros
RISC-V: use generic serial.h
RISC-V: remove spin_unlock_wait()
RISC-V: `sfence.vma` orderes the instruction cache
RISC-V: Add READ_ONCE in arch_spin_is_locked()
RISC-V: __test_and_op_bit_ord should be strongly ordered
RISC-V: Remove smb_mb__{before,after}_spinlock()
RISC-V: Remove __smp_bp__{before,after}_atomic
RISC-V: Comment on why {,cmp}xchg is ordered how it is
...
|
|
Introducing a new include/lib directory just for this file totally
messes up tab completion for include/linux, which is highly annoying.
Move it to include/linux where we have headers for all kinds of other
lib/ code as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
read_status and config_aneg are the only mandatory callbacks and most
of the time the generic implementation is used by drivers.
So make the core fall back to the generic version if a driver doesn't
implement the respective callback.
Also currently the core doesn't seem to verify that drivers implement
the mandatory calls. If a driver doesn't do so we'd just get a NPE.
With this patch this potential issue doesn't exit any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch adds support for ERSPAN tunnel over ipv6.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move two erspan functions to header file, erspan.h, so ipv6
erspan implementation can use it.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ETH_RESET_AP to reset the application processor(s) inside the NIC
interface.
Current ETH_RESET_MGMT supports a management processor inside this NIC.
This is typically used for remote NIC management purposes.
Application processors exist inside some SmartNICs to run various
applications inside the NIC processor - be it a simple algorithm without
an OS to as complex as hosting multiple VMs.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As rfc3758#section-3.1 demands:
A3) When a TSN is "abandoned", if it is part of a fragmented message,
all other TSN's within that fragmented message MUST be abandoned
at the same time.
Besides, if it couldn't handle this, the rest frags would never get
assembled in peer side.
This patch supports it by adding abandoned flag in sctp_datamsg, when
one chunk is being abandoned, set chunk->msg->abandoned as well. Next
time when checking for abandoned, go checking chunk->msg->abandoned
first.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Contains offsets for all dm816 clkctrl main and optional clocks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Contains offsets for all dm814 clkctrl main and optional clocks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Contains offsets for all am43xx clkctrl main and optional clocks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Contains offsets for all am33xx clkctrl main and optional clocks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Contains offsets for all dra7 clkctrl main and optional clocks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Contains offsets for all omap5 clkctrl main and optional clocks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Pull drm fixes and cleanups from Dave Airlie:
"The main thing are a bunch of fixes for the new amd display code, a
bunch of smatch fixes.
core:
- Atomic helper regression fix.
- Deferred fbdev fallout regression fix.
amdgpu:
- New display code (dc) dpms, suspend/resume and smatch fixes, along
with some others
- Some regression fixes for amdkfd/radeon.
- Fix a ttm regression for swiotlb disabled
bridge:
- A bunch of fixes for the tc358767 bridge
mali-dp + hdlcd:
- some fixes and internal API catchups.
imx-drm:
-regression fix in atomic code.
omapdrm:
- platform detection regression fixes"
* tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits)
drm/imx: always call wait_for_flip_done in commit_tail
omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()
drm: omapdrm: Fix DPI on platforms using the DSI VDDS
omapdrm: hdmi4: Correct the SoC revision matching
drm/omap: displays: panel-dpi: add backlight dependency
drm/omap: Fix error handling path in 'omap_dmm_probe()'
drm/i915: Disable THP until we have a GPU read BW W/A
drm/bridge: tc358767: fix 1-lane behavior
drm/bridge: tc358767: fix AUXDATAn registers access
drm/bridge: tc358767: fix timing calculations
drm/bridge: tc358767: fix DP0_MISC register set
drm/bridge: tc358767: filter out too high modes
drm/bridge: tc358767: do no fail on hi-res displays
drm/bridge: Fix lvds-encoder since the panel_bridge rework.
drm/bridge: synopsys/dw-hdmi: Enable cec clock
drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/fb_helper: Disable all crtc's when initial setup fails.
drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
...
|
|
This exports the mipi_dbi_buf_copy() and mipi_dbi_spi_cmd_max_speed()
functions so that they can be shared with other drivers.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1511122328-31133-4-git-send-email-david@lechnology.com
|
|
Pull block fixes from Jens Axboe:
"A selection of fixes/changes that should make it into this series.
This contains:
- NVMe, two merges, containing:
- pci-e, rdma, and fc fixes
- Device quirks
- Fix for a badblocks leak in null_blk
- bcache fix from Rui Hua for a race condition regression where
-EINTR was returned to upper layers that didn't expect it.
- Regression fix for blktrace for a bug introduced in this series.
- blktrace cleanup for cgroup id.
- bdi registration error handling.
- Small series with cleanups for blk-wbt.
- Various little fixes for typos and the like.
Nothing earth shattering, most important are the NVMe and bcache fixes"
* 'for-linus' of git://git.kernel.dk/linux-block: (34 commits)
nvme-pci: fix NULL pointer dereference in nvme_free_host_mem()
nvme-rdma: fix memory leak during queue allocation
blktrace: fix trace mutex deadlock
nvme-rdma: Use mr pool
nvme-rdma: Check remotely invalidated rkey matches our expected rkey
nvme-rdma: wait for local invalidation before completing a request
nvme-rdma: don't complete requests before a send work request has completed
nvme-rdma: don't suppress send completions
bcache: check return value of register_shrinker
bcache: recover data from backing when data is clean
bcache: Fix building error on MIPS
bcache: add a comment in journal bucket reading
nvme-fc: don't use bit masks for set/test_bit() numbers
blk-wbt: fix comments typo
blk-wbt: move wbt_clear_stat to common place in wbt_done
blk-sysfs: remove NULL pointer checking in queue_wb_lat_store
blk-wbt: remove duplicated setting in wbt_init
nvme-pci: add quirk for delay before CHK RDY for WDC SN200
block: remove useless assignment in bio_split
null_blk: fix dev->badblocks leak
...
|
|
This patch renames all the variable instances of hdac_device with hdev
to prepare the code base to remove the usage of hdac_ext_device
data structures done in the following patches. Existing code uses hdev
and hdac as variable names for hdac_device as well as hdac_ext_device,
which creates confusion.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current hid-multitouch driver only allow the report of two
orientations, vertical and horizontal. We use the Azimuth orientation
usage 0x3F under the Digitizer usage page to report orientation if the
device supports it.
Changelog:
v1 -> v2:
- Fix commit message.
- Remove resolution reporting for ABS_MT_ORIENTATION.
v2 -> v3:
- Fix commit message.
v3 -> v4:
- Fix ABS_MT_ORIENTATION ABS param range.
- Don't set ABS_MT_ORIENTATION in ABS_DG_HEIGHT when it is already
set by ABS_DG_AZIMUTH.
v4 -> v5:
- Improve multi-touch-protocol.rst documentation.
Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org>
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Pull ACPI fixes from Rafael Wysocki:
"These fix a regression related to the ACPI EC handling during system
suspend/resume on some platforms and prevent modalias from being
exposed to user space for ACPI device object with "not functional and
not present" status.
Specifics:
- Fix an ACPI EC driver regression (from the 4.9 cycle) causing the
driver's power management operations to be omitted during system
suspend/resume on platforms where the EC instance from the ECDT
table is used instead of the one from the DSDT (Lv Zheng).
- Prevent modalias from being exposed to user space for ACPI device
objects with _STA returning 0 (not present and not functional) to
prevent driver modules from being loaded automatically for hardware
that is not actually present on some platforms (Hans de Goede)"
* tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix regression related to PM ops support in ECDT device
ACPI / bus: Leave modalias empty for devices which are not present
|
|
Fixes for 4.15. Highlights:
- DC fixes for S3, gamma, audio, pageflipping, etc.
- fix a regression in radeon from kfd removal
- fix a ttm regression with swiotlb disabled
- misc other fixes
* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux: (36 commits)
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/amd/display: USB-C / thunderbolt dock specific workaround
drm/amd/display: Switch to drm_atomic_helper_wait_for_flip_done
drm/amd/display: fix gamma setting
drm/amd/display: Do not put drm_atomic_state on resume
drm/amd/display: Fix couple more inconsistent NULL checks in dc_resource
drm/amd/display: Fix potential NULL and mem leak in create_links
drm/amd/display: Fix hubp check in set_cursor_position
drm/amd/display: Fix use before NULL check in validate_timing
drm/amd/display: Bunch of smatch error and warning fixes in DC
drm/amd/display: Fix amdgpu_dm bugs found by smatch
drm/amd/display: try to find matching audio inst for enc inst first
drm/amd/display: fix seq issue: turn on clock before programming afmt.
drm/amd/display: fix memory leaks on error exit return
drm/amd/display: check plane state before validating fbc
drm/amd/display: Do DC mode-change check when adding CRTCs
drm/amd/display: Revert noisy assert messages
drm/amd/display: fix split viewport rounding error
drm/amd/display: Check aux channel before MST resume
...
|
|
This is amdkfd pull request for -rc2. It contains three small fixes to the
CIK SDMA code, compilation error fix in kfd_ioctl.h and fix to accessing
a pointer after it was released.
* tag 'drm-amdkfd-fixes-2017-11-26' of git://people.freedesktop.org/~gabbayo/linux:
uapi: fix linux/kfd_ioctl.h userspace compilation errors
drm/amdkfd: fix amdkfd use-after-free GP fault
drm/amdkfd: Fix SDMA oversubsription handling
drm/amdkfd: Fix SDMA ring buffer size calculation
drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode
|
|
Replace driver's code with the generic helpers that do the same thing.
Remove todo entry.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-6-noralf@tronnes.org
|
|
Add drm_mode_config_helper_suspend/resume() which takes care of
atomic modeset suspend/resume for simple use cases.
The suspend state is stored in struct drm_mode_config.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-3-noralf@tronnes.org
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
- x86 bugfixes: APIC, nested virtualization, IOAPIC
- PPC bugfix: HPT guests on a POWER9 radix host
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: Let KVM_SET_SIGNAL_MASK work as advertised
KVM: VMX: Fix vmx->nested freeing when no SMI handler
KVM: VMX: Fix rflags cache during vCPU reset
KVM: X86: Fix softlockup when get the current kvmclock
KVM: lapic: Fixup LDR on load in x2apic
KVM: lapic: Split out x2apic ldr calculation
KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts
KVM: vmx: use X86_CR4_UMIP and X86_FEATURE_UMIP
KVM: x86: Fix CPUID function for word 6 (80000001_ECX)
KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2
KVM: x86: ioapic: Preserve read-only values in the redirection table
KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered
KVM: x86: ioapic: Remove redundant check for Remote IRR in ioapic_set_irq
KVM: x86: ioapic: Don't fire level irq when Remote IRR set
KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race
KVM: x86: inject exceptions produced by x86_decode_insn
KVM: x86: Allow suppressing prints on RDMSR/WRMSR of unhandled MSRs
KVM: x86: fix em_fxstor() sleeping while in atomic
KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure
KVM: nVMX: Validate the IA32_BNDCFGS on nested VM-entry
...
|
|
Similar to commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu"),
TC actions don't need to respect RCU grace period, because it
is either just detached from tc filter (standalone case) or
it is removed together with tc filter (bound case) in which case
RCU grace period is already respected at filter layer.
Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are no more users.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
We have padding to try and align the refcount on a separate cache
line. But after several simplifications the padding has increased
substantially.
So now it's easy to change the layout to get rid of the padding
entirely.
We group the write-heavy __refcnt and __use with less often used
items such as the rcu_head and the error code.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
The first member of an IPSEC route bundle chain sets it's dst->path to
the underlying ipv4/ipv6 route that carries the bundle.
Stated another way, if one were to follow the xfrm_dst->child chain of
the bundle, the final non-NULL pointer would be the path and point to
either an ipv4 or an ipv6 route.
This is largely used to make sure that PMTU events propagate down to
the correct ipv4 or ipv6 route.
When we don't have the top of an IPSEC bundle 'dst->path == dst'.
Move it down into xfrm_dst and key off of dst->xfrm.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
The dst->from value is only used by ipv6 routes to track where
a route "came from".
Any time we clone or copy a core ipv6 route in the ipv6 routing
tables, we have the copy/clone's ->from point to the base route.
This is used to handle route expiration properly.
Only ipv6 uses this mechanism, and only ipv6 code references
it. So it is safe to move it into rt6_info.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
XFRM bundle child chains look like this:
xdst1 --> xdst2 --> xdst3 --> path_dst
All of xdstN are xfrm_dst objects and xdst->u.dst.xfrm is non-NULL.
The final child pointer in the chain, here called 'path_dst', is some
other kind of route such as an ipv4 or ipv6 one.
The xfrm output path pops routes, one at a time, via the child
pointer, until we hit one which has a dst->xfrm pointer which
is NULL.
We can easily preserve the above mechanisms with child sitting
only in the xfrm_dst structure. All children in the chain
before we break out of the xfrm_output() loop have dst->xfrm
non-NULL and are therefore xfrm_dst objects.
Since we break out of the loop when we find dst->xfrm NULL, we
will not try to dereference 'dst' as if it were an xfrm_dst.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This will make a future change moving the dst->child pointer less
invasive.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
Only IPSEC routes have a non-NULL dst->child pointer. And IPSEC
routes are identified by a non-NULL dst->xfrm pointer.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
Delete it.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
Previously phy_id was u32 and phy_id_mask was unsigned int. As the
phy_id_mask defines the important bits of the phy_id (and is therefore
the same size) these two variables should be the same data type.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new pinctrl driver for Amlogic's Meson-AXG SoC.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
* acpi-ec:
ACPI / EC: Fix regression related to PM ops support in ECDT device
|
|
It should be clear to developers that they should not include
this file in new code.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allow to relax IoRestriction for certain cases.
One of the use case is incorrectly cooked ACPI table where interrupt pin is
defined with GpioIo() macro with IoRestrictionOutputOnly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Some broken ACPI tables might require quirks in the OS.
Introduce quirks field in struct acpi_gpio_mapping.
Propagate them to struct acpi_gpio_info for further use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
Vivien Didelot
Jakub Kicinski
Andrew Jeffery
Lukas Wunner
Arnd Bergmann
Linus Torvalds
Christoph Hellwig
Heiner Kallweit
William Tu
Scott Branden
Xin Long
Tero Kristo
David Lechner
Ughreja, Rakesh A
Wei-Ning Huang
Dave Airlie
Noralf Trønnes
Geert Uytterhoeven
Cong Wang
David Miller
Richard Leitner
Xingyu Chen
Rafael J. Wysocki
Linus Walleij
Andy Shevchenko