| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The bus_info or a similar field exists in a lot of structs, yet drivers
tend to set the value of that field by themselves in a determinable way.
Thus provide a helper for doing this. To be used in subsequent patches.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The documentation for media_device_init() had several references to
(struct) media_entity where it should have referred to struct media_device
instead. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove redundant kerneldoc documentation in mc-device.c. The functions are
already documented in media-device.h, where non-redundant documentation is
also moved.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add functions to create ancillary links, so that they don't need to
be manually created by users.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
To describe in the kernel the connection between devices and their
supporting peripherals (for example, a camera sensor and the vcm
driving the focusing lens for it), add a new type of media link
to introduce the concept of these ancillary links.
Add some elements to the uAPI documentation to explain the new link
type, their purpose and some aspects of their current implementation.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This new optional callback is called when the adapter is fully configured
or fully unconfigured. Some drivers may have to take action when this
happens.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Allow drivers to change the transmit timeout value, i.e. after how
long should a transmit be considered 'lost', i.e. the corresponding
cec_transmit_done_ts was never called.
Some CEC devices have their own timeout, and so this timeout value must be
longer than that hardware timeout value. If it is shorter then the
framework would consider the transmit lost, even though it is effectively
still in progress at the hardware level.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
These two helper functions return true if the received message
contains the result of a previous non-blocking transmit. Either
the tx_status result (cec_msg_recv_is_tx_result) of the transmit,
or the rx_status result (cec_msg_recv_is_rx_result) of the reply
to the original transmit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If a transmit-in-progress was canceled, then, once the transmit
is done, mark it as aborted and refrain from retrying the transmit.
To signal this situation the new transmit_in_progress_aborted field is
set to true.
The old implementation would just set adap->transmitting to NULL and
set adap->transmit_in_progress to false, but on the hardware level
the transmit was still ongoing. However, the framework would think
the transmit was aborted, and if a new transmit was issued, then
it could overwrite the HW buffer containing the old transmit with the
new transmit, leading to garbled data on the CEC bus.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Don't enable/disable the adapter if the first fh is opened or the
last fh is closed, instead do this when the adapter is configured
or unconfigured, and also when we enter Monitor All or Monitor Pin
mode for the first time or we exit the Monitor All/Pin mode for the
last time.
However, if needs_hpd is true, then do this when the physical
address is set or cleared: in that case the adapter typically is
powered by the HPD, so it really is disabled when the HPD is low.
This case (needs_hpd is true) was already handled in this way, so
this wasn't changed.
The problem with the old behavior was that if the HPD goes low when
no fh is open, and a transmit was in progress, then the adapter would
be disabled, typically stopping the transmit immediately which
leaves a partial message on the bus, which isn't nice and can confuse
some adapters.
It makes much more sense to disable it only when the adapter is
unconfigured and we're not monitoring the bus, since then you really
won't be using it anymore.
To keep track of this store a CEC activation count and call adap_enable
only when it goes from 0 to 1 or back to 0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Pull more drm fixes from Dave Airlie:
"Maarten was away, so Maxine stepped up and sent me the drm-fixes
merge, so no point leaving it for another week.
The big change is an OF revert around bridge/panels, it may have some
driver fallout, but hopefully this revert gets them shook out in the
next week easier.
Otherwise it's a bunch of locking/refcounts across drivers, a radeon
dma_resv logic fix and some raspberry pi panel fixes.
panel:
- revert of patch that broke panel/bridge issues
dma-buf:
- remove unused header file.
amdgpu:
- partial revert of locking change
radeon:
- fix dma_resv logic inversion
panel:
- pi touchscreen panel init fixes
vc4:
- build fix
- runtime pm refcount fix
vmwgfx:
- refcounting fix"
* tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: partial revert "remove ctx->lock" v2
Revert "drm: of: Lookup if child node has panel or bridge"
Revert "drm: of: Properly try all possible cases for bridge/panel detection"
drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
drm/vmwgfx: Fix gem refcounting and memory evictions
drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m
drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
dma-buf-map: remove renamed header file
drm/radeon: fix logic inversion in radeon_sync_resv
|
|
Pull input fixes from Dmitry Torokhov:
- a new set of keycodes to be used by marine navigation systems
- minor fixes to omap4-keypad and cypress-sf drivers
* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: add Marine Navigation Keycodes
Input: omap4-keypad - fix pm_runtime_get_sync() error checking
Input: cypress-sf - register a callback to disable the regulators
|
|
In trace event class mptcp_dump_mpext, dump the newly added infinite_map
field of struct mptcp_dump_mpext too.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the infinite mapping sending logic.
Add a new flag send_infinite_map in struct mptcp_subflow_context. Set
it true when a single contiguous subflow is in use and the
allow_infinite_fallback flag is true in mptcp_pm_mp_fail_received().
In mptcp_sendmsg_frag(), if this flag is true, call the new function
mptcp_update_infinite_map() to set the infinite mapping.
Add a new flag infinite_map in struct mptcp_ext, set it true in
mptcp_update_infinite_map(), and check this flag in a new helper
mptcp_check_infinite_map().
In mptcp_update_infinite_map(), set data_len to 0, and clear the
send_infinite_map flag, then do fallback.
In mptcp_established_options(), use the helper mptcp_check_infinite_map()
to let the infinite mapping DSS can be sent out in the fallback mode.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rework the body of usb_maxpacket() and just rely on the
usb_pipe_endpoint() helper function to retrieve the host endpoint
instead of doing it by hand.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220317035514.6378-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that all users of usb_maxpacket() have been migrated to only use
two arguments, remove the third variadic argument which was introduced
for the transition.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220317035514.6378-9-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a transitional patch with the ultimate goal of changing the
prototype of usb_maxpacket() from:
| static inline __u16
| usb_maxpacket(struct usb_device *udev, int pipe, int is_out)
into:
| static inline u16 usb_maxpacket(struct usb_device *udev, int pipe)
The third argument of usb_maxpacket(): is_out gets removed because it
can be derived from its second argument: pipe using
usb_pipeout(pipe). Furthermore, in the current version,
ubs_pipeout(pipe) is called regardless in order to sanitize the is_out
parameter.
In order to make a smooth change, we first deprecate the is_out
parameter by simply ignoring it (using a variadic function) and will
remove it later, once all the callers get updated.
The body of the function is reworked accordingly and is_out is
replaced by usb_pipeout(pipe). The WARN_ON() calls become unnecessary
and get removed.
Finally, the return type is changed from __u16 to u16 because this is
not a UAPI function.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220317035514.6378-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Two fixes for the raspberrypi panel initialisation, one fix for a logic
inversion in radeon, a build and pm refcounting fix for vc4, two reverts
for drm_of_get_bridge that caused a number of regression and a locking
regression for amdgpu.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084403.2xrhf3jusdej5yo4@houat
|
|
Adds device tree binding documentation for clocks in the EN7523 SOC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220314084409.84394-2-nbd@nbd.name
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The RTC reference and MSSPLL were previously not documented or defined,
as they were unused. Add their defines to the PolarFire SoC header.
Fixes: 2145bb687e3f ("dt-bindings: clk: microchip: Add Microchip PolarFire host binding")
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220413075835.3354193-6-conor.dooley@microchip.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"The main and larger change here is a workaround for AMD's lack of
cache coherency for encrypted-memory guests.
I have another patch pending, but it's waiting for review from the
architecture maintainers.
RISC-V:
- Remove 's' & 'u' as valid ISA extension
- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
- Fix NMI watchdog in guests on AMD
- Fix for SEV cache incoherency issues
- Don't re-acquire SRCU lock in complete_emulated_io()
- Avoid NULL pointer deref if VM creation fails
- Fix race conditions between APICv disabling and vCPU creation
- Bugfixes for disabling of APICv
- Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
- Do not use bitfields larger than 32-bits, they differ between GCC
and clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: introduce and use more page size-related constants
kvm: selftests: do not use bitfields larger than 32-bits for PTEs
KVM: SEV: add cache flush to solve SEV cache incoherency issues
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
KVM: selftests: Silence compiler warning in the kvm_page_table_test
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
KVM: SPDX style and spelling fixes
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
RISC-V: KVM: Restrict the extensions that can be disabled
RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
|
|
Some boards like the AM335x EVM-SK and AM437x GP EVM provide software
control via a GPIO pin to toggle the DDR VTT regulator to reduce power
consumption in low power states.
The VTT regulator should be disabled after enabling self-refresh on
suspend, and should be enabled before disabling self-refresh on resume.
This is to allow proper self-refresh entry/exit commands to be
transmitted to the memory.
The "ti,vtt-gpio-pin" device tree property in the wkup_m3_ipc node
specifies which GPIO pin to use. This property is communicated to the
Wakeup Cortex M3 co-processor where the actual toggling of the GPIO pin
happens in CM3 firmware [1].
Please note that the GPIO pin must be on the GPIO0 module as that module
is in the wakeup power domain.
[1] https://git.ti.com/cgit/processor-firmware/ti-amx3-cm3-pm-firmware/tree/src/pm_services/ddr.c?h=08.02.00.006#n190
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
[dfustini: remove the unnecessary "ti,needs-vtt-toggle" property]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220409211215.2529387-3-dfustini@baylibre.com
|
|
Payload sizes for mailbox commands are expected to be positive values
coming from userspace. The documentation correctly describes these as
always unsigned values. The mailbox and send structures that support
the mailbox commands however, use __s32 types for the payloads.
Replace __s32 with __u32 in the mailbox and send command structures
and update usages.
Kernel users of the interface already block all negative values and
there is no known ability for userspace to have grown a dependency on
submitting negative values to the kernel. The known user of the IOCTL,
the CXL command line interface (cxl-cli) already enforces positive
size values.
A Smatch warning of a signedness uncovered this issue.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20220414051246.1244575-1-alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CXL specification claims S3 support at a hardware level, but at a
system software level there are some missing pieces. Section 9.4 (CXL
2.0) rightly claims that "CXL mem adapters may need aux power to retain
memory context across S3", but there is no enumeration mechanism for the
OS to determine if a given adapter has that support. Moreover the save
state and resume image for the system may inadvertantly end up in a CXL
device that needs to be restored before the save state is recoverable.
I.e. a circular dependency that is not resolvable without a third party
save-area.
Arrange for the cxl_mem driver to fail S3 attempts. This still nominaly
allows for suspend, but requires unbinding all CXL memory devices before
the suspend to ensure the typical DRAM flow is taken. The cxl_mem unbind
flow is intended to also tear down all CXL memory regions associated
with a given cxl_memdev.
It is reasonable to assume that any device participating in a System RAM
range published in the EFI memory map is covered by aux power and
save-area outside the device itself. So this restriction can be
minimized in the future once pre-existing region enumeration support
arrives, and perhaps a spec update to clarify if the EFI memory map is
sufficent for determining the range of devices managed by
platform-firmware for S3 support.
Per Rafael, if the CXL configuration prevents suspend then it should
fail early before tasks are frozen, and mem_sleep should stop showing
'mem' as an option [1]. Effectively CXL augments the platform suspend
->valid() op since, for example, the ACPI ops are not aware of the CXL /
PCI dependencies. Given the split role of platform firmware vs OS
provisioned CXL memory it is up to the cxl_mem driver to determine if
the CXL configuration has elements that platform firmware may not be
prepared to restore.
Link: https://lore.kernel.org/r/CAJZ5v0hGVN_=3iU8OLpHY3Ak35T5+JcBM-qs8SbojKrpd0VXsA@mail.gmail.com [1]
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/165066828317.3907920.5690432272182042556.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp->delivered only changes
when we receive an ACK.
We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.
Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qed_nvmetcp_ip_services.c and its corresponding header file were
introduced in commit 806ee7f81a2b ("qed: Add IP services APIs support")
but there's still no users for any of the functions they declare.
Since these files are effectively unused, let's just drop them.
Found by code inspection. Compile-tested only.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/351ac8c847980e22850eb390553f8cc0e1ccd0ce.1650545051.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull sound fixes from Takashi Iwai:
"At this time, the majority of changes are for pending ASoC fixes while
a few usual HD-audio and USB-audio quirks are found.
Almost all patches are small device-specific fixes, and nothing
worrisome stands out, so far"
* tag 'sound-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
ALSA: hda/realtek: Add quirk for Clevo NP70PNP
ALSA: hda: intel-dsp-config: Add RaptorLake PCI IDs
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook 845/865 G9
ALSA: usb-audio: Clear MIDI port active flag after draining
ALSA: usb-audio: add mapping for MSI MAG X570S Torpedo MAX.
ALSA: hda/i915: Fix one too many pci_dev_put()
ALSA: hda/hdmi: add HDMI codec VID for Raptorlake-P
ALSA: hda/hdmi: fix warning about PCM count when used with SOF
sound/oss/dmasound: fix 'dmasound_setup' defined but not used
firmware: cs_dsp: Fix overrun of unterminated control name string
ASoC: codecs: Fix an error handling path in (rx|tx|va)_macro_probe()
ASoC: Intel: sof_es8336: Add a quirk for Huawei Matebook D15
ASoC: Intel: sof_es8336: add a quirk for headset at mic1 port
ASoC: Intel: sof_es8336: support a separate gpio to control headphone
ASoC: Intel: sof_es8336: simplify speaker gpio naming
ASoC: wm8731: Disable the regulator when probing fails
ASoC: Intel: soc-acpi: correct device endpoints for max98373
ASoC: codecs: wcd934x: do not switch off SIDO Buck when codec is in use
ASoC: SOF: topology: Fix memory leak in sof_control_load()
ASoC: SOF: topology: cleanup dailinks on widget unload
...
|
|
Create a kthread for each console to perform console printing. During
normal operation (@system_state == SYSTEM_RUNNING), the kthread
printers are responsible for all printing on their respective
consoles.
During non-normal operation, console printing is done as it has been:
within the context of the printk caller or within irqwork triggered
by the printk caller, referred to as direct printing.
Since threaded console printers are responsible for all printing
during normal operation, this also includes messages generated via
deferred printk calls. If direct printing is in effect during a
deferred printk call, the queued irqwork will perform the direct
printing. To make it clear that this is the only time that the
irqwork will perform direct printing, rename the flag
PRINTK_PENDING_OUTPUT to PRINTK_PENDING_DIRECT_OUTPUT.
Threaded console printers synchronize against each other and against
console lockers by taking the console lock for each message that is
printed.
Note that the kthread printers do not care about direct printing.
They will always try to print if new records are available. They can
be blocked by direct printing, but will be woken again once direct
printing is finished.
Console unregistration is a bit tricky because the associated
kthread printer cannot be stopped while the console lock is held.
A policy is implemented that states: whichever task clears
con->thread (under the console lock) is responsible for stopping
the kthread. unregister_console() will clear con->thread while
the console lock is held and then stop the kthread after releasing
the console lock.
For consoles that have implemented the exit() callback, the kthread
is stopped before exit() is called.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-14-john.ogness@linutronix.de
|
|
Once kthread printing is available, console printing will no longer
occur in the context of the printk caller. However, there are some
special contexts where it is desirable for the printk caller to
directly print out kernel messages. Using pr_flush() to wait for
threaded printers is only possible if the caller is in a sleepable
context and the kthreads are active. That is not always the case.
Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit()
functions to explicitly (and globally) activate/deactivate preferred
direct console printing. The term "direct console printing" refers to
printing to all enabled consoles from the context of the printk
caller. The term "prefer" is used because this type of printing is
only best effort. If the console is currently locked or other
printers are already actively printing, the printk caller will need
to rely on the other contexts to handle the printing.
This preferred direct printing is how all printing has been handled
until now (unless it was explicitly deferred).
When kthread printing is introduced, there may be some unanticipated
problems due to kthreads being unable to flush important messages.
In order to minimize such risks, preferred direct printing is
activated for the primary important messages when the system
experiences general types of major errors. These are:
- emergency reboot/shutdown
- cpu and rcu stalls
- hard and soft lockups
- hung tasks
- warn
- sysrq
Note that since kthread printing does not yet exist, no behavior
changes result from this commit. This is only implementing the
counter and marking the various places where preferred direct
printing is active.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-13-john.ogness@linutronix.de
|
|
Provide a might-sleep function to allow waiting for console printers
to catch up to the latest logged message.
Use pr_flush() whenever it is desirable to get buffered messages
printed before continuing: suspend_console(), resume_console(),
console_stop(), console_start(), console_unblank().
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-12-john.ogness@linutronix.de
|
|
Refactor/rework printing logic in order to prepare for moving to
threaded console printing.
- Move @console_seq into struct console so that the current
"position" of each console can be tracked individually.
- Move @console_dropped into struct console so that the current drop
count of each console can be tracked individually.
- Modify printing logic so that each console independently loads,
prepares, and prints its next record.
- Remove exclusive_console logic. Since console positions are
handled independently, replaying past records occurs naturally.
- Update the comments explaining why preemption is disabled while
printing from printk() context.
With these changes, there is a change in behavior: the console
replaying the log (formerly exclusive console) will no longer block
other consoles. New messages appear on the other consoles while the
newly added console is still replaying.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-10-john.ogness@linutronix.de
|
|
The CPU sync functions are a NOP for !CONFIG_SMP. But for
!CONFIG_SMP they still need to disable interrupts in order to
preserve context within the CPU sync sections.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-3-john.ogness@linutronix.de
|
|
Since the printk cpulock is CPU-reentrant and since it is used
in all contexts, its usage must be carefully considered and
most likely will require programming locklessly. To avoid
mistaking the printk cpulock as a typical lock, rename it to
cpu_sync. The main functions then become:
printk_cpu_sync_get_irqsave(flags);
printk_cpu_sync_put_irqrestore(flags);
Add extra notes of caution in the function description to help
developers understand the requirements for correct usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-2-john.ogness@linutronix.de
|
|
The ZA array can be read and written with the NT_ARM_ZA. Similarly to
our interface for the SVE vector registers the regset consists of a
header with information on the current vector length followed by an
optional register data payload, represented as for signals as a series
of horizontal vectors from 0 to VL/8 in the endianness independent
format used for vectors.
On get if ZA is enabled then register data will be provided, otherwise
it will be omitted. On set if register data is provided then ZA is
enabled and initialized using the provided data, otherwise it is
disabled.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-22-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The streaming mode SVE registers are represented using the same data
structures as for SVE but since the vector lengths supported and in use
may not be the same as SVE we represent them with a new type NT_ARM_SSVE.
Unfortunately we only have a single 16 bit reserved field available in
the header so there is no space to fit the current and maximum vector
length for both standard and streaming SVE mode without redefining the
structure in a way the creates a complicatd and fragile ABI. Since FFR
is not present in streaming mode it is read and written as zero.
Setting NT_ARM_SSVE registers will put the task into streaming mode,
similarly setting NT_ARM_SVE registers will exit it. Reads that do not
correspond to the current mode of the task will return the header with
no register data. For compatibility reasons on write setting no flag for
the register type will be interpreted as setting SVE registers, though
users can provide no register data as an alternative mechanism for doing
so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-21-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
As for SVE provide a prctl() interface which allows processes to
configure their SME vector length.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-12-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: mm (memory-failure, memcg,
userfaultfd, hugetlbfs, mremap, oom-kill, kasan, hmm), and kcov"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()
kcov: don't generate a warning on vm_insert_page()'s failure
MAINTAINERS: add Vincenzo Frascino to KASAN reviewers
oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup
selftest/vm: add skip support to mremap_test
selftest/vm: support xfail in mremap_test
selftest/vm: verify remap destination address in mremap_test
selftest/vm: verify mmap addr in mremap_test
mm, hugetlb: allow for "high" userspace addresses
userfaultfd: mark uffd_wp regardless of VM_WRITE flag
memcg: sync flush only if periodic flush is delayed
mm/memory-failure.c: skip huge_zero_page in memory_failure()
mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()
|
|
This adds PWM support for Xilinx LogiCORE IP AXI soft timers commonly
found on Xilinx FPGAs. At the moment clock control is very basic: we
just enable the clock during probe and pin the frequency. In the future,
someone could add support for disabling the clock when not in use.
Some common code has been specially demarcated. While currently only
used by the PWM driver, it is anticipated that it may be split off in
the future to be used by the timer driver as well.
This driver was written with reference to Xilinx DS764 for v1.03.a [1].
[1] https://www.xilinx.com/support/documentation/ip_documentation/axi_timer/v1_03_a/axi_timer_ds764.pdf
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
When walking the children of an ACPI device, take extra care to avoid
using to_acpi_device() on the ones that are not ACPI devices, because
that may lead to out-of-bounds access and memory corruption.
While at it, make the function passed to acpi_dev_for_each_child()
take a struct acpi_device pointer argument (instead of a struct device
one), so it is more straightforward to use.
Fixes: b7dd6298db81 ("ACPI: PM: Introduce acpi_dev_power_up_children_with_adr()")
Reported-by: kernel test robot <oliver.sang@intel.com>
BugLink: https://lore.kernel.org/lkml/20220420064725.GB16310@xsang-OptiPlex-9020/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add support to check if IOCTL ID or QUERY ID is supported in firmware
or not.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Link: https://lore.kernel.org/r/1649242526-17493-2-git-send-email-ronak.jain@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver_override field from platform driver should not be initialized
from static memory (string literal) because the core later kfree() it,
for example when driver_override is set via sysfs.
Use dedicated helper to set driver_override properly.
Fixes: 950a7388f02b ("rpmsg: Turn name service into a stand alone driver")
Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a helper to set driver_override to the reduce amount of duplicated
code.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a helper to set driver_override to the reduce amount of duplicated
code.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a helper to set driver_override to the reduce amount of duplicated
code. Make the driver_override field const char, because it is not
modified by the core and it matches other subsystems.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a helper to set driver_override to the reduce amount of duplicated
code. Make the driver_override field const char, because it is not
modified by the core and it matches other subsystems.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a helper to set driver_override to reduce the amount of duplicated
code. Make the driver_override field const char, because it is not
modified by the core and it matches other subsystems.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a helper to set driver_override to reduce the amount of duplicated
code. Make the driver_override field const char, because it is not
modified by the core and it matches other subsystems.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several core drivers and buses expect that driver_override is a
dynamically allocated memory thus later they can kfree() it.
However such assumption is not documented, there were in the past and
there are already users setting it to a string literal. This leads to
kfree() of static memory during device release (e.g. in error paths or
during unbind):
kernel BUG at ../mm/slub.c:3960!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
...
(kfree) from [<c058da50>] (platform_device_release+0x88/0xb4)
(platform_device_release) from [<c0585be0>] (device_release+0x2c/0x90)
(device_release) from [<c0a69050>] (kobject_put+0xec/0x20c)
(kobject_put) from [<c0f2f120>] (exynos5_clk_probe+0x154/0x18c)
(exynos5_clk_probe) from [<c058de70>] (platform_drv_probe+0x6c/0xa4)
(platform_drv_probe) from [<c058b7ac>] (really_probe+0x280/0x414)
(really_probe) from [<c058baf4>] (driver_probe_device+0x78/0x1c4)
(driver_probe_device) from [<c0589854>] (bus_for_each_drv+0x74/0xb8)
(bus_for_each_drv) from [<c058b48c>] (__device_attach+0xd4/0x16c)
(__device_attach) from [<c058a638>] (bus_probe_device+0x88/0x90)
(bus_probe_device) from [<c05871fc>] (device_add+0x3dc/0x62c)
(device_add) from [<c075ff10>] (of_platform_device_create_pdata+0x94/0xbc)
(of_platform_device_create_pdata) from [<c07600ec>] (of_platform_bus_create+0x1a8/0x4fc)
(of_platform_bus_create) from [<c0760150>] (of_platform_bus_create+0x20c/0x4fc)
(of_platform_bus_create) from [<c07605f0>] (of_platform_populate+0x84/0x118)
(of_platform_populate) from [<c0f3c964>] (of_platform_default_populate_init+0xa0/0xb8)
(of_platform_default_populate_init) from [<c01031f8>] (do_one_initcall+0x8c/0x404)
Provide a helper which clearly documents the usage of driver_override.
This will allow later to reuse the helper and reduce the amount of
duplicated code.
Convert the platform driver to use a new helper and make the
driver_override field const char (it is not modified by the core).
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To move towards a more consistent behaviour between genpd and the runtime
PM core, let's start by converting genpd's time-accounting from ktime_get()
into ktime_get_mono_fast_ns().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
Sakari Ailus
Daniel Scally
Hans Verkuil
Linus Torvalds
Geliang Tang
Vincent Mailhol
Dave Airlie
John Crispin
Conor Dooley
Dave Gerlach
Alison Schofield
Dan Williams
Pengcheng Yang
Guillaume Nault
John Ogness
Mark Brown
Sean Anderson
Rafael J. Wysocki
Ronak Jain
Krzysztof Kozlowski
Ulf Hansson
Matthias Brugger