| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If we hit the sync case, like when skipping clearing for kernel internal
objects, or when falling back to cpu clearing, like in i915, we end up
trying to add a NULL fence, but with some recent changes in this area
this now just results in NULL deref in dma_resv_add_fence:
<1>[ 5.466383] BUG: kernel NULL pointer dereference, address: 0000000000000008
<1>[ 5.466384] #PF: supervisor read access in kernel mode
<1>[ 5.466385] #PF: error_code(0x0000) - not-present page
<6>[ 5.466386] PGD 0 P4D 0
<4>[ 5.466387] Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 5.466389] CPU: 5 PID: 267 Comm: modprobe Not tainted 5.18.0-rc2-CI-CI_DRM_11481+ #1
<4>[ 5.466391] RIP: 0010:dma_resv_add_fence+0x63/0x260
<4>[ 5.466395] Code: 38 85 c0 0f 84 df 01 00 00 0f 88 e8 01 00 00 83 c0 01 0f 88 df 01 00 00 8b 05 35 89 10 01 49 8d 5e 68 85 c0 0f 85 45 01 00 00 <48> 8b 45 08 48 3d c0 a5 0a 82 0f 84 5c 01 00 00 48 3d 60 a5 0a 82
<4>[ 5.466396] RSP: 0018:ffffc90000e974f8 EFLAGS: 00010202
<4>[ 5.466397] RAX: 0000000000000001 RBX: ffff888123e88b28 RCX: 00000000ffffffff
<4>[ 5.466398] RDX: 0000000000000001 RSI: ffffffff822e4f50 RDI: ffffffff8233f087
<4>[ 5.466399] RBP: 0000000000000000 R08: ffff8881313dbc80 R09: 0000000000000001
<4>[ 5.466399] R10: 0000000000000001 R11: 00000000da354294 R12: 0000000000000000
<4>[ 5.466400] R13: ffff88810927dc58 R14: ffff888123e88ac0 R15: ffff88810a88d600
<4>[ 5.466401] FS: 00007f5fa1193540(0000) GS:ffff88845d880000(0000) knlGS:0000000000000000
<4>[ 5.466402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 5.466402] CR2: 0000000000000008 CR3: 0000000106dd6003 CR4: 00000000003706e0
<4>[ 5.466403] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[ 5.466404] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
<4>[ 5.466404] Call Trace:
<4>[ 5.466405] <TASK>
<4>[ 5.466406] ttm_bo_move_accel_cleanup+0x62/0x270 [ttm]
<4>[ 5.466411] ? i915_rsgt_from_buddy_resource+0x185/0x1e0 [i915]
<4>[ 5.466529] i915_ttm_move+0xfd/0x430 [i915]
<4>[ 5.466833] ? dma_resv_reserve_fences+0x4e/0x320
<4>[ 5.466836] ? ttm_bo_add_move_fence.constprop.20+0xf7/0x140 [ttm]
<4>[ 5.466841] ttm_bo_handle_move_mem+0xa1/0x140 [ttm]
<4>[ 5.466845] ttm_bo_validate+0xee/0x160 [ttm]
<4>[ 5.466849] __i915_ttm_get_pages+0x4f/0x210 [i915]
<4>[ 5.466976] i915_ttm_get_pages+0xad/0x140 [i915]
<4>[ 5.467094] ____i915_gem_object_get_pages+0x32/0xf0 [i915]
<4>[ 5.467210] __i915_gem_object_get_pages+0x89/0xa0 [i915]
<4>[ 5.467323] i915_vma_get_pages+0x114/0x1d0 [i915]
<4>[ 5.467446] i915_vma_pin_ww+0xd3/0xa90 [i915]
<4>[ 5.467570] i915_vma_pin.constprop.10+0x119/0x1b0 [i915]
<4>[ 5.467700] ? __mutex_unlock_slowpath+0x3e/0x2b0
<4>[ 5.467704] intel_alloc_initial_plane_obj.isra.6+0x1a9/0x390 [i915]
<4>[ 5.467833] intel_crtc_initial_plane_config+0x83/0x340 [i915]
In the ttm_bo_move_sync_cleanup() case it seems we only really care
about calling ttm_bo_wait_free_node(), so let's instead just call that
directly.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411085603.58156-1-matthew.auld@intel.com
|
|
The i.MX8MN has a General Purpose Timer (GPT) just like the i.MX8MM,
which already has such bindings. Add the relevant bindings for the Nano
SoC too.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220317223600.175894-1-alvin@pqrs.dk
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
|
It is possible when using ASoC that input_dev is unregistered while
calling snd_jack_report, which causes NULL pointer dereference.
In order to prevent this serialize access to input_dev using mutex lock.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220412091628.3056922-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a small helper function to handle the error path more easily
when an error happens during the probe for the device with the
device-managed card. Since devres releases in the reverser order of
the creations, usually snd_card_free() gets called at the last in the
probe error path unless it already reached snd_card_register() calls.
Due to this nature, when a driver expects the resource releases in
card->private_free, this might be called too lately.
As a workaround, one should call the probe like:
static int __some_probe(...) { // do real probe.... }
static int some_probe(...)
{
return snd_card_free_on_error(dev, __some_probe(dev, ...));
}
so that the snd_card_free() is called explicitly at the beginning of
the error path from the probe.
This function will be used in the upcoming fixes to address the
regressions by devres usages.
Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220412093141.8008-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
DG2 clear color render compression uses Tile4 layout. Therefore, we need
to define a new format modifier for uAPI to support clear color rendering.
v2:
Display version is fixed. [Imre]
KDoc is enhanced for cc modifier. [Nanley & Lionel]
v3:
Split out the modifier addition to a separate patch.
Clarify the modifier layout description.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-4-imre.deak@intel.com
|
|
The render/media engines on DG2 unify render compression and media
compression into a single format for the first time, using the Tile 4
layout for main surfaces. The compression algorithm is different from
any previous platform and the display engine must still be configured to
decompress either a render or media compressed surface; as such, we
need new RC and MC framebuffer modifiers to represent buffers in this
format.
v2: Clarify modifier layout description.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-2-imre.deak@intel.com
|
|
HDA Jack detection logic doesn't work when the HDACODEC
in runtime suspended state as unsol event won't be triggered
during D3 state. As pulseaudio server in userspace rely on the
jack mixer control status to show the audio devices in gui and
any display sink device hotplug event during D3 state will never
updates the jack status which will result in no audio device option
available in userspace settings.
The possible option available to resolve this issue is to run Jack
polling worker thread even after codec suspend state. The choice can
be made based on compromise between power saving or Jack detection in
suspend state.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220411073210.23445-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull in TTM changes needed for DG2 CCS enabling from Ram.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
drm-misc-next for 5.19:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- atomic: Add atomic_print_state to private objects
- edid: Constify the EDID parsing API, rework of the API
- dma-buf: Add dma_resv_replace_fences, dma_resv_get_singleton, make
dma_resv_excl_fence private
- format: Support monochrome formats
- fbdev: fixes for cfb_imageblit and sys_imageblit, pagelist
corruption fix
- selftests: several small fixes
- ttm: Rework bulk move handling
Driver Changes:
- Switch all relevant drivers to drm_mode_copy or drm_mode_duplicate
- bridge: conversions to devm_drm_of_get_bridge and panel_bridge,
autosuspend for analogix_dp, audio support for it66121, DSI to DPI
support for tc358767, PLL fixes and I2C support for icn6211
- bridge_connector: Enable HPD if supported
- etnaviv: fencing improvements
- gma500: GEM and GTT improvements, connector handling fixes
- komeda: switch to plane reset helper
- mediatek: MIPI DSI improvements
- omapdrm: GEM improvements
- panel: DT bindings fixes for st7735r, few fixes for ssd130x, new
panels: ltk035c5444t, B133UAN01, NV3052C
- qxl: Allow to run on arm64
- sysfb: Kconfig rework, support for VESA graphic mode selection
- vc4: Add a tracepoint for CL submissions, HDMI YUV output,
HDMI and clock improvements
- virtio: Remove restriction of non-zero blob_flags,
- vmwgfx: support for CursorMob and CursorBypass 4, various
improvements and small fixes
[airlied: fixup conflict with newvision panel callbacks]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085940.pnflvjojs4qw4b77@houat
|
|
Leon Romanovsky says:
====================
Mellanox shared branch that includes:
* Removal of FPGA TLS code https://lore.kernel.org/all/cover.1649073691.git.leonro@nvidia.com
Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code
is unmaintained, untested and not in-use by any upstream/distro oriented
customers. In order to reduce code complexity, drop the kernel code,
clean build config options and delete useless kTLS vs. TLS separation.
[1] https://network.nvidia.com/related-docs/eol/LCR-000286.pdf
* Removal of FPGA IPsec code https://lore.kernel.org/all/cover.1649232994.git.leonro@nvidia.com
Together with FPGA TLS, the IPsec went to EOL state in the November of
2019 [1]. Exactly like FPGA TLS, no active customers exist for this
upstream code and all the complexity around that area can be deleted.
[2] https://network.nvidia.com/related-docs/eol/LCR-000535.pdf
* Fix to undefined behavior from Borislav https://lore.kernel.org/all/20220405151517.29753-11-bp@alien8.de
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: (23 commits)
net/mlx5: Remove not-implemented IPsec capabilities
net/mlx5: Remove ipsec_ops function table
net/mlx5: Reduce kconfig complexity while building crypto support
net/mlx5: Move IPsec file to relevant directory
net/mlx5: Remove not-needed IPsec config
net/mlx5: Align flow steering allocation namespace to common style
net/mlx5: Unify device IPsec capabilities check
net/mlx5: Remove useless IPsec device checks
net/mlx5: Remove ipsec vs. ipsec offload file separation
RDMA/core: Delete IPsec flow action logic from the core
RDMA/mlx5: Drop crypto flow steering API
RDMA/mlx5: Delete never supported IPsec flow action
net/mlx5: Remove FPGA ipsec specific statistics
net/mlx5: Remove XFRM no_trailer flag
net/mlx5: Remove not-used IDA field from IPsec struct
net/mlx5: Delete metadata handling logic
net/mlx5_fpga: Drop INNOVA IPsec support
IB/mlx5: Fix undefined behavior due to shift overflowing the constant
net/mlx5: Cleanup kTLS function names and their exposure
net/mlx5: Remove tls vs. ktls separation as it is the same
...
====================
Link: https://lore.kernel.org/r/20220409055303.1223644-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a offload driver doesn't use the xmit workqueue, then when we are doing
ep_disconnect libiscsi can still inject PDUs to the driver. This adds a
check for if the connection is bound before trying to inject PDUs.
Link: https://lore.kernel.org/r/20220408001314.5014-9-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the tx and rx suspend fields into one flags field.
Link: https://lore.kernel.org/r/20220408001314.5014-8-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If iscsid is doing a stop_conn at the same time the kernel is starting
error recovery we can hit a race that allows the cleanup work to run on a
valid connection. In the race, iscsi_if_stop_conn sees the cleanup bit set,
but it calls flush_work on the clean_work before iscsi_conn_error_event has
queued it. The flush then returns before the queueing and so the
cleanup_work can run later and disconnect/stop a conn while it's in a
connected state.
The patch:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
added the late stop_conn call bug originally, and the patch:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
attempted to fix it but only fixed the normal EH case and left the above
race for the iscsid restart case. For the normal EH case we don't hit the
race because we only signal userspace to start recovery after we have done
the queueing, so the flush will always catch the queued work or see it
completed.
For iscsid restart cases like boot, we can hit the race because iscsid will
call down to the kernel before the kernel has signaled any error, so both
code paths can be running at the same time. This adds a lock around the
setting of the cleanup bit and queueing so they happen together.
Link: https://lore.kernel.org/r/20220408001314.5014-6-michael.christie@oracle.com
Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We can't release the endpoint ID until all references to the endpoint have
been dropped or it could be allocated while in use. This has us use an idr
instead of looping over all conns to find a free ID and then free the ID
when all references have been dropped instead of when the device is only
deleted.
Link: https://lore.kernel.org/r/20220408001314.5014-4-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function is not generally applicable enough to be included in the core
kernel header. Move it to block since it's the only subsystem using it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220327173316.315-1-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the new dscp_t type to replace the tos field of struct
fib_entry_notifier_info. This ensures ECN bits are ignored and makes it
compatible with the dscp field of struct fib_rt_info.
This also allows sparse to flag potential incorrect uses of DSCP and
ECN bits.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new dscp_t type to replace the tos field of struct fib_rt_info.
This ensures ECN bits are ignored and makes it compatible with the
fa_dscp field of struct fib_alias.
This also allows sparse to flag potential incorrect uses of DSCP and
ECN bits.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The data transfer mode that corresponds to the 'xfer_mode' parameter for
ata_xfer_mode2shift() is a 8-bit *unsigned* value. Using *unsigned long*
to declare the parameter leads to a problematic implicit *int* to *unsigned
long* cast and was most probably a result of a copy/paste mistake -- use
the 'u8' type instead, as in ata_xfer_mode2mask()...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The rcutorture test suite sometimess triggers a random scheduler
preemption call while simulating a read delay. Unfortunately, its
direct call to preempt_schedule() bypasses the static call/key filter
used by CONFIG_PREEMPT_DYNAMIC. This breaks the no-preempt assumption
when the dynamic preemption mode is "none".
For example, rcu_blocking_is_gp() is fooled and abbreviates grace periods
when the CPU runs in no-preempt UP mode.
Fix this by making torture_preempt_schedule() call __preempt_schedule(),
which uses the static call/key.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The main Tasks RCU quiescent state is voluntary context switch. However,
userspace execution is also a valid quiescent state, and is a valuable one
for userspace applications that spin repeatedly executing light-weight
non-sleeping system calls. Currently, such an application can delay a
Tasks RCU grace period for many tens of seconds.
This commit therefore enlists the aid of the scheduler-clock interrupt to
provide a Tasks RCU quiescent state when it interrupted a task executing
in userspace.
[ paulmck: Apply feedback from kernel test robot. ]
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Neil Spring <ntspring@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit instruments the acquisitions of the srcu_struct structure's
->lock, enabling the initiation of a transition from SRCU_SIZE_SMALL
to SRCU_SIZE_BIG when sufficient contention is experienced. The
instrumentation counts the number of trylock failures within the confines
of a single jiffy. If that number exceeds the value specified by the
srcutree.small_contention_lim kernel boot parameter (which defaults to
100), and if the value specified by the srcutree.convert_to_big kernel
boot parameter has the 0x10 bit set (defaults to 0), then a transition
will be automatically initiated.
By default, there will never be any transitions, so that none of the
srcu_struct structures ever gains an srcu_node array.
The useful values for srcutree.convert_to_big are:
0x00: Never convert.
0x01: Always convert at init_srcu_struct() time.
0x02: Convert when rcutorture prints its first round of statistics.
0x03: Decide conversion approach at boot given system size.
0x10: Convert if contention is encountered.
0x12: Convert if contention is encountered or when rcutorture prints
its first round of statistics, whichever comes first.
The value 0x11 acts the same as 0x01 because the conversion happens
before there is any chance of contention.
[ paulmck: Apply "static" feedback from kernel test robot. ]
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When an srcu_struct structure is created (but not in a kernel module)
by DEFINE_SRCU() and friends, the per-CPU srcu_data structure is
statically allocated. In all other cases, that structure is obtained
from alloc_percpu(), in which case cleanup_srcu_struct() must invoke
free_percpu() on the resulting ->sda pointer in the srcu_struct pointer.
Which it does.
Except that it also invokes free_percpu() on the ->sda pointer
referencing the statically allocated per-CPU srcu_data structures.
Which free_percpu() is surprisingly OK with.
This commit nevertheless stops cleanup_srcu_struct() from freeing
statically allocated per-CPU srcu_data structures.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If an srcu_struct structure defined by tree SRCU's DEFINE_STATIC_SRCU()
is used by a module, sparse will give the following diagnostic:
sparse: symbol '__srcu_struct_nodes_srcu' was not declared. Should it be static?
The problem is that a within-module DEFINE_STATIC_SRCU() must define
a non-static srcu_struct because it is exported by referencing it in a
special '__section("___srcu_struct_ptrs")'. This reference is needed
so that module load and unloading can invoke init_srcu_struct() and
cleanup_srcu_struct(), respectively. Unfortunately, sparse is unaware of
'__section("___srcu_struct_ptrs")', resulting in the above false-positive
diagnostic. To avoid this false positive, this commit therefore creates
a prototype of the srcu_struct with an "extern" keyword.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit shrinks the srcu_struct structure by converting its ->node
field from a fixed-size compile-time array to a pointer to a dynamically
allocated array. In kernels built with large values of NR_CPUS that boot
on systems with smaller numbers of CPUs, this can save significant memory.
[ paulmck: Apply kernel test robot feedback. ]
Reported-by: A cast of thousands
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit makes Tree SRCU able to operate without an snp_node
array, that is, when the srcu_data structures' ->mynode pointers
are NULL. This can result in high contention on the srcu_struct
structure's ->lock, but only when there are lots of call_srcu(),
synchronize_srcu(), and synchronize_srcu_expedited() calls.
Note that when there is no snp_node array, all SRCU callbacks use
CPU 0's callback queue. This is optimal in the common case of low
update-side load because it removes the need to search each CPU
for the single callback that made the grace period happen.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit fixed a typo in the srcu_node structure's ->srcu_have_cbs
comment. While in the area, redo a couple of comments to take advantage
of 100-character line lengths.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.
With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.
To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.
For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.
For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.
Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.
Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.
@ieee80211_sta@
struct ieee80211_sta *s;
struct sta_info *si;
identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
@@
(
s->
- var
+ deflink.var
|
si->sta.
- var
+ deflink.var
)
@sta_info@
struct sta_info *si;
identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
@@
(
si->
- var
+ deflink.var
)
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
According to lib/idr.c,
The IDA handles its own locking. It is safe to call any of the IDA
functions without synchronisation in your code.
so the 'chan_mutex' mutex can just be removed.
It is here only to protect some ida_alloc()/ida_free() calls.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7180452c1d77b039e27b6f9418e0e7d9dd33c431.1644140845.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add additional structure definitions for Intel In-memory Analytics
Accelerator (IAA/IAX). See specification (1) for more details.
1: https://cdrdv2.intel.com/v1/dl/getContent/721858
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164704100212.1373038.18362680016033557757.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add ieee80211_rx_check_bss_color_collision routine in order to introduce
BSS color collision detection in mac80211 if it is not supported in HW/FW
(e.g. for mt7915 chipset).
Add IEEE80211_HW_DETECTS_COLOR_COLLISION flag to let the driver notify
BSS color collision detection is supported in HW/FW. Set this for ath11k
which apparently didn't need this code.
Tested-by: Peter Chiu <Chui-Hao.Chiu@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/a05eeeb1841a84560dc5aaec77894fcb69a54f27.1648204871.git.lorenzo@kernel.org
[clarify commit message a bit, move flag to mac80211]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The comment above the ieee80211_tx_info_clear_status() helper was somewhat
confusing as to which fields it was or wasn't clearing. So replace it by
something that is hopefully more, well, clear.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/20220404210108.2684907-1-toke@toke.dk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Replace unnecessary list_for_each_entry_continue() in nf_tables,
from Jakob Koschel.
2) Add struct nf_conntrack_net_ecache to conntrack event cache and
use it, from Florian Westphal.
3) Refactor ctnetlink_dump_list(), also from Florian.
4) Bump module reference counter on cttimeout object addition/removal,
from Florian.
5) Consolidate nf_log MAC printer, from Phil Sutter.
6) Add basic logging support for unknown ethertype, from Phil Sutter.
7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil.
8) Replace hardcode value in nft_bitwise, from Jeremy Sowden.
9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names,
also from Jeremy.
10) nft_fib support for reverse path filtering with policy-based routing
on iif. Extend selftests to cover for this new usecase, from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a clocksource based on the goldfish-rtc device.
Move the timer register definition to <clocksource/timer-goldfish.h>
This kernel implementation is based on the QEMU upstream implementation:
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=hw/rtc/goldfish_rtc.c
goldfish-timer is a high-precision signed 64-bit nanosecond timer.
It is part of the 'goldfish' virtual hardware platform used to run
some emulated Android systems under QEMU.
This timer only supports oneshot event.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220406201523.243733-4-laurent@vivier.eu
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The goldfish TTY device was clearly defined as having little-endian
registers, but the switch to __raw_{read,write}l(() broke its driver
when running on big-endian kernels (if anyone ever tried this).
The m68k qemu implementation got this wrong, and assumed native-endian
registers. While this is a bug in qemu, it is probably impossible to
fix that since there is no way of knowing which other operating systems
have started relying on that bug over the years.
Hence revert commit da31de35cd2f ("tty: goldfish: use
__raw_writel()/__raw_readl()", and define gf_ioread32()/gf_iowrite32()
to be able to use accessors defined by the architecture.
Cc: stable@vger.kernel.org # v5.11+
Fixes: da31de35cd2fb78f ("tty: goldfish: use __raw_writel()/__raw_readl()")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Link: https://lore.kernel.org/r/20220406201523.243733-2-laurent@vivier.eu
[geert: Add rationale based on Arnd's comments]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Replace kfree_skb() used in icmp_rcv() and icmpv6_rcv() with
kfree_skb_reason().
In order to get the reasons of the skb drops after icmp message handle,
we change the return type of 'handler()' in 'struct icmp_control' from
'bool' to 'enum skb_drop_reason'. This may change its original
intention, as 'false' means failure, but 'SKB_NOT_DROPPED_YET' means
success now. Therefore, all 'handler' and the call of them need to be
handled. Following 'handler' functions are involved:
icmp_unreach()
icmp_redirect()
icmp_echo()
icmp_timestamp()
icmp_discard()
And following new drop reasons are added:
SKB_DROP_REASON_ICMP_CSUM
SKB_DROP_REASON_INVALID_PROTO
The reason 'INVALID_PROTO' is introduced for the case that the packet
doesn't follow rfc 1122 and is dropped. This is not a common case, and
I believe we can locate the problem from the data in the packet. For now,
this 'INVALID_PROTO' is used for the icmp broadcasts with wrong types.
Maybe there should be a document file for these reasons. For example,
list all the case that causes the 'UNHANDLED_PROTO' and 'INVALID_PROTO'
drop reason. Therefore, users can locate their problems according to the
document.
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As David Ahern suggested, the reasons for skb drops should be more
general and not be code based.
Therefore, rename SKB_DROP_REASON_PTYPE_ABSENT to
SKB_DROP_REASON_UNHANDLED_PROTO, which is used for the cases of no
L3 protocol handler, no L4 protocol handler, version extensions, etc.
From previous discussion, now we have the aim to make these reasons
more abstract and users based, avoiding code based.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to report the reasons of skb drops in 'sock_queue_rcv_skb()',
introduce the function 'sock_queue_rcv_skb_reason()'.
As the return value of 'sock_queue_rcv_skb()' is used as the error code,
we can't make it as drop reason and have to pass extra output argument.
'sock_queue_rcv_skb()' is used in many places, so we can't change it
directly.
Introduce the new function 'sock_queue_rcv_skb_reason()' and make
'sock_queue_rcv_skb()' an inline call to it.
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Give applications a way to tell if the kernel supports sane linked files,
as in files being assigned at the right time to be able to reliably
do <open file direct into slot X><read file from slot X> while using
IOSQE_IO_LINK to order them.
Not really a bug fix, but flag it as such so that it gets pulled in with
backports of the deferred file assignment.
Fixes: 6bf9c47a3989 ("io_uring: defer file assignment")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve ATA queued command allocation as follows:
- For attaining a qc tag for a SAS host we need to allocate a bit in
ata_port.sas_tag_allocated bitmap.
However we already have a unique tag per device in range
[0, ATA_MAX_QUEUE -1] in the scsi cmnd budget token, so just use that
instead.
- It is a bit pointless to have ata_qc_new_init() in libata-core.c since it
pokes scsi internals, so inline it in ata_scsi_qc_new() (in
libata-scsi.c). Also update Doc accordingly.
- Use standard SCSI helpers set_host_byte() and set_status_byte() in
ata_scsi_qc_new().
Christoph Hellwig originally contributed the change to inline
ata_qc_new_init().
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Pull driver core updates from Greg KH:
"Here are two small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and
then one new user snuck in. So this series has two changes:
- removal of the default_attrs field in the powerpc/pseries/vas code.
The change has been acked by the PPC maintainers to come through
this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed.
This cleans up the kobject code a little bit and removes some
duplicated functionality that confused people (now there is only
one way to do default groups)
Both of these have been in linux-next for all of this week with no
reported problems"
* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: kobj_type: remove default_attrs
powerpc/pseries/vas: use default_groups in kobj_type
|
|
Pull locking fixes from Borislav Petkov:
- Allow the compiler to optimize away unused percpu accesses and change
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/page_alloc: mark pagesets as __maybe_unused"
Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
x86/percpu: Remove volatile from arch_raw_cpu_ptr().
static_call: Remove __DEFINE_STATIC_CALL macro
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
static_call: Don't make __static_call_return0 static
x86,static_call: Fix __static_call_return0 for i386
|
|
Since we are protected from async completions by decrypt_compl_lock
we can drop the async_notify and reinit the completion before we
start waiting.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Among all the users of the kfifo buffers, no one uses the
INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and
simplify a little bit the internals - overall the documentation - by
eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by
default with kfifo buffers, which will basically mimic what all the "non
direct" modes do.
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jyoti Bhayana <jbhayana@google.com>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-13-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This entry should, under no situation, be modified by device
drivers. Now that we have limited its read access to device drivers
really needing it and did so through a dedicated helper, we can
easily move this variable to the opaque structure in order to
prevent any further modification from non-authorized code (out of the
core, basically).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20220207143840.707510-12-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In order to later move this variable within the opaque structure, let's
create a helper for accessing it in read-only mode. This helper will be
exposed to device drivers and kept accessible for the few that could need
it. The write access to this variable however should be fully reserved to
the core so in a second step we will hide this variable into the opaque
structure.
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-11-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
As we are going to hide the currentmode inside the opaque structure,
this helper would soon need to call a non-inline function which would
simply drop the benefit of having the helper defined inline in a header.
One alternative is to move this helper in the core as there is no more
interest in defining it inline in a header. We will pay the minor cost
either way.
Let's do like the iio_device_id() helper which also refers to the opaque
structure and gets defined in the core.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-10-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Right now the (framework) mlock lock is (ab)used for multiple purposes:
1- protecting concurrent accesses over the odr local cache
2- avoid changing samplig frequency whilst buffer is running
Let's start by handling situation #1 with a local lock.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Let's provide more details about these two variables because their
understanding may not be straightforward for someone not used to the IIO
subsystem internal logic. The different modes will soon be also be more
documented for the same reason.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-2-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This is part of the effort to reduce kernel/sysctl.c to only contain the
core logic.
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220215065019.7520-1-tangmeng@uniontech.com
|
Matthew Auld
Alvin Šipraga
Amadeusz Sławiński
Takashi Iwai
Mika Kahola
Matt Roper
Mohan Kumar
Joonas Lahtinen
Dave Airlie
Jakub Kicinski
Mike Christie
Keith Busch
Guillaume Nault
Sergey Shtylyov
Frederic Weisbecker
Paul E. McKenney
Alexander Aring
Sriram R
Christophe JAILLET
Dave Jiang
Lorenzo Bianconi
Toke Høiland-Jørgensen
Jani Nikula
David S. Miller
Laurent Vivier
Menglong Dong
Jens Axboe
John Garry
Linus Torvalds
Miquel Raynal
tangmeng