| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts the following patches :
- commit 2e05fcae83c4 ("tcp: fix compile error if !CONFIG_SYSCTL")
- commit 4f661542a402 ("tcp: fix zerocopy and notsent_lowat issues")
- commit 472c2e07eef0 ("tcp: add one skb cache for tx")
- commit 8b27dae5a2e8 ("tcp: add one skb cache for rx")
Having a cache of one skb (in each direction) per TCP socket is fragile,
since it can cause a significant increase of memory needs,
and not good enough for high speed flows anyway where more than one skb
is needed.
We want instead to add a generic infrastructure, with more flexible
per-cpu caches, for alien NUMA nodes.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the previous patch the mentioned helper is
used only inside its compilation unit: let's make
it static.
RFC -> v1:
- preserve the tcp_build_frag() helper (Eric)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the tcp_skb_entail() helper is actually skb_entail(), renamed
to provide proper scope.
The two helper will be used by the next patch.
RFC -> v1:
- rename skb_entail to tcp_skb_entail (Eric)
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's nice to be able to test a tagging protocol with dsa_loop, but not
at the cost of losing the ability of building the tagging protocol and
switch driver as modules, because as things stand, there is a circular
dependency between the two. Tagging protocol drivers cannot depend on
switch drivers, that is a hard fact.
The reasoning behind the blamed patch was that accessing dp->priv should
first make sure that the structure behind that pointer is what we really
think it is.
Currently the "sja1105" and "sja1110" tagging protocols only operate
with the sja1105 switch driver, just like any other tagging protocol and
switch combination. The only way to mix and match them is by modifying
the code, and this applies to dsa_loop as well (by default that uses
DSA_TAG_PROTO_NONE). So while in principle there is an issue, in
practice there isn't one.
Until we extend dsa_loop to allow user space configuration, treat the
problem as a non-issue and just say that DSA ports found by tag_sja1105
are always sja1105 ports, which is in fact true. But keep the
dsa_port_is_sja1105 function so that it's easy to patch it during
testing, and rely on dead code elimination.
Fixes: 994d2cbb08ca ("net: dsa: tag_sja1105: be dsa_loop-safe")
Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The problem is that DSA tagging protocols really must not depend on the
switch driver, because this creates a circular dependency at insmod
time, and the switch driver will effectively not load when the tagging
protocol driver is missing.
The code was structured in the way it was for a reason, though. The DSA
driver-facing API for PTP timestamping relies on the assumption that
two-step TX timestamps are provided by the hardware in an out-of-band
manner, typically by raising an interrupt and making that timestamp
available inside some sort of FIFO which is to be accessed over
SPI/MDIO/etc.
So the API puts .port_txtstamp into dsa_switch_ops, because it is
expected that the switch driver needs to save some state (like put the
skb into a queue until its TX timestamp arrives).
On SJA1110, TX timestamps are provided by the switch as Ethernet
packets, so this makes them be received and processed by the tagging
protocol driver. This in itself is great, because the timestamps are
full 64-bit and do not require reconstruction, and since Ethernet is the
fastest I/O method available to/from the switch, PTP timestamps arrive
very quickly, no matter how bottlenecked the SPI connection is, because
SPI interaction is not needed at all.
DSA's code structure and strict isolation between the tagging protocol
driver and the switch driver break the natural code organization.
When the tagging protocol driver receives a packet which is classified
as a metadata packet containing timestamps, it passes those timestamps
one by one to the switch driver, which then proceeds to compare them
based on the recorded timestamp ID that was generated in .port_txtstamp.
The communication between the tagging protocol and the switch driver is
done through a method exported by the switch driver, sja1110_process_meta_tstamp.
To satisfy build requirements, we force a dependency to build the
tagging protocol driver as a module when the switch driver is a module.
However, as explained in the first paragraph, that causes the circular
dependency.
To solve this, move the skb queue from struct sja1105_private :: struct
sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data.
The latter is a data structure for which hacks have already been put
into place to be able to create persistent storage per switch that is
accessible from the tagging protocol driver (see sja1105_setup_ports).
With the skb queue directly accessible from the tagging protocol driver,
we can now move sja1110_process_meta_tstamp into the tagging driver
itself, and avoid exporting a symbol.
Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110")
Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It looks like this field was never used since its introduction in commit
227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through
standalone ports") remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Setting the video clocks requires fine-tuned adjustments of various
video clocks. Export the required ones to allow changing the video clock
for the CVBS and HDMI outputs at runtime.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210713232510.3057750-7-martin.blumenstingl@googlemail.com
|
|
Add Xilinx ZynqMP firmware MMIO APIs support to set and get PS_MODE
pins value and status. These APIs create an interface path between
mode pin controller driver and low-level API to access GPIO pins.
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The new framing mode causes the user space regression, because
the alsa-lib code does not initialize the reserved space in
the params structure when the device is opened.
This change adds SNDRV_RAWMIDI_IOCTL_USER_PVERSION like we
do for the PCM interface for the protocol acknowledgment.
Cc: David Henningsson <coding@diwic.se>
Cc: <stable@vger.kernel.org>
Fixes: 08fdced60ca0 ("ALSA: rawmidi: Add framing mode")
BugLink: https://github.com/alsa-project/alsa-lib/issues/178
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210920171850.154186-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add devm_arch_io_reserve_memtype_wc() as managed wrapper around
arch_io_reserve_memtype_wc(). Useful for several graphics drivers
that set framebuffer memory to write combining.
v2:
* fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-3-tzimmermann@suse.de
|
|
Add devm_arch_phys_wc_add() as managed wrapper around arch_phys_wc_add().
Useful for several graphics drivers that set framebuffer memory to write
combining.
v2:
* fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-2-tzimmermann@suse.de
|
|
After the previous patch, there are no users of 'file' in
n_tty_ioctl_helper. So remove it also from there.
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210914091134.17426-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The only user of 'file' parameter in tty_mode_ioctl is a BUG_ON check.
Provided it never crashed for anyone, it's an overkill to pass the
parameter to tty_mode_ioctl only for this check.
If we wanted to check 'file' there, we should handle it in more graceful
way anyway. Not by a BUG == crash.
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210914091134.17426-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The documentation says that the return value of tty_ldisc_ops::hangup
hook is ignored. And it really is, so there is no point for its return
type to be int. Switch it to void and all the hooks too.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210914091134.17426-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After the recent headers cleanup, some function declarations still have
extern before them. It is superfluous (for function declarations), so
remove extern from those which still have it.
This unifies them with the rest of the files.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210914091134.17426-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The last user was apparently removed by commit a352def21a64 (tty: Ldisc
revamp) in 2008. So remove the field completely, the only setter
(n_tty_inherit_ops) and also its only possible value
(LDISC_FLAG_DEFINED).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210914091134.17426-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Read vcpu->vcpu_idx directly instead of bouncing through the one-line
wrapper, kvm_vcpu_get_idx(), and drop the wrapper. The wrapper is a
remnant of the original implementation and serves no purpose; remove it
before it gains more users.
Back when kvm_vcpu_get_idx() was added by commit 497d72d80a78 ("KVM: Add
kvm_vcpu_get_idx to get vcpu index in kvm->vcpus"), the implementation
was more than just a simple wrapper as vcpu->vcpu_idx did not exist and
retrieving the index meant walking over the vCPU array to find the given
vCPU.
When vcpu_idx was introduced by commit 8750e72a79dd ("KVM: remember
position in kvm->vcpus array"), the helper was left behind, likely to
avoid extra thrash (but even then there were only two users, the original
arm usage having been removed at some point in the past).
No functional change intended.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210910183220.2397812-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now
that the two function are always called back-to-back by architectures
that have rseq. The rseq helper is stubbed out for architectures that
don't support rseq, i.e. this is a nop across the board.
Note, tracehook_notify_resume() is horribly named and arguably does not
belong in tracehook.h as literally every line of code in it has nothing
to do with tracing. But, that's been true since commit a42c6ded827d
("move key_repace_session_keyring() into tracehook_notify_resume()")
first usurped tracehook_notify_resume() back in 2012. Punt cleaning that
mess up to future patches.
No functional change intended.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The 'size' is used in struct_size(domain, revmap, size) and its input
parameter type is 'size_t'(unsigned int).
Changing the size to 'unsigned int' to make the type consistent.
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210916025203.44841-1-cuibixuan@huawei.com
|
|
devlink_register() can't fail and always returns success, but all drivers
are obligated to check returned status anyway. This adds a lot of boilerplate
code to handle impossible flow.
Make devlink_register() void and simplify the drivers that use that
API call.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
- dma-buf: Avoid a warning with some allocations, Remove
DMA_FENCE_TRACE macros
Core Changes:
- bridge: New helper to git rid of panels in drivers
- fence: Improve dma_fence_add_callback documentation, Improve
dma_fence_ops->wait documentation
- ioctl: Unexport drm_ioctl_permit
- lease: Documentation improvements
- fourcc: Add new macro to determine the modifier vendor
- quirks: Add the Steam Deck, Chuwi HiBook, Chuwi Hi10 Pro, Samsung
Galaxy Book 10.6, KD Kurio Smart C15200 2-in-1, Lenovo Ideapad D330
- resv: Improve the documentation
- shmem-helpers: Allocate WC pages on x86, Switch to vmf_insert_pfn
- sched: Fix for a timer being canceled too soon, Avoid null pointer
derefence if the fence is null in drm_sched_fence_free, Convert
drivers to rely on its dependency tracking
- ttm: Switch to kerneldoc, new helper to clear all DMA mappings, pool
shrinker optitimization, Remove ttm_tt_destroy_common, Fix for
unbinding on multiple drivers
Driver Changes:
- bochs: New PCI IDs
- msm: Fence ordering impromevemnts
- stm: Add layer alpha support, zpos
- v3d: Fix for a Vulkan CTS failure
- vc4: Conversion to the new bridge helpers
- vgem: Use shmem helpers
- virtio: Support mapping exported vram
- zte: Remove obsolete driver
- bridge: Probe improvements for it66121, enable DSI EOTP for anx7625,
errors propagation improvements for anx7625
- panels: 60fps mode for otm8009a, New driver for Samsung S6D27A1
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 16 Sep 2021 17:30:50 AEST
# gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5
# gpg: Can't check signature: No public key
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916073132.ptbbmjetm7v3ufq3@gilmour
|
|
The 'current_tag' field in struct scsi_device is unused now; remove it.
Link: https://lore.kernel.org/r/1631696835-136198-4-git-send-email-john.garry@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are no dependencies in <scsi/scsi_cmnd.h> on the <scsi/scsi_host.h>
header file. Hence remove the scsi_host.h include directive from
scsi_cmnd.h. This include directive was introduced in February 2021 by
commit af1830956dc3 ("scsi: core: Add mq_poll support to SCSI layer").
Link: https://lore.kernel.org/r/20210917212751.2676054-1-bvanassche@acm.org
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
|
|
Add compatible and constants for the power domains exposed by the RPMH
in the Qualcomm SM6350 platform.
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210820203105.229764-3-konrad.dybcio@somainline.org
|
|
Add compatible and constants for the power domains exposed by the RPM
in the Qualcomm MSM8953 platform.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210825170233.19859-1-sireeshkodali1@gmail.com
|
|
Implement the support for SAW v4.1, used in at least MSM8998,
SDM630, SDM660 and APQ variants and, while at it, also add the
configuration for the SDM630/660 Silver and Gold cluster L2
Adaptive Voltage Scaler: this is also one of the prerequisites
to allow the OSM controller to perform DCVS.
Please note that despite there are various "versions" of these
values downstream, these are the only ones that are perfectly
stable on the entire set of tested devices.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-4-angelogioacchino.delregno@somainline.org
|
|
In commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic
CPUidle driver") the SPM driver has been converted to a
generic CPUidle driver: that was mainly made to simplify the
driver and that was a great accomplishment;
Though, at that time, this driver was only applicable to ARM 32-bit SoCs,
lacking logic about the handling of newer generation SAW.
In preparation for the enablement of SPM features on AArch64/ARM64,
split the cpuidle-qcom-spm driver in two: the CPUIdle related
state machine (currently used only on ARM SoCs) stays there, while
the SPM communication handling lands back in soc/qcom/spm.c and
also making sure to not discard the simplifications that were
introduced in the aforementioned commit.
Since now the "two drivers" are split, the SCM dependency in the
main SPM handling is gone and for this reason it was also possible
to move the SPM initialization early: this will also make sure that
whenever the SAW CPUIdle driver is getting initialized, the SPM
driver will be ready to do the job.
Please note that the anticipation of the SPM initialization was
also done to optimize the boot times on platforms that have their
CPU/L2 idle states managed by other means (such as PSCI), while
needing SAW initialization for other purposes, like AVS control.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
|
|
Not all upcoming usecases will have an interface to allow the aoss
driver to hook onto. Expose the send api and create a get function to
enable drivers to send their own messages to aoss.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1630420228-31075-2-git-send-email-deesin@codeaurora.org
|
|
In preparation for CXL labels that move the uuid to a different offset
in the label, add nsl_{ref,get,validate}_uuid(). These helpers use the
proper uuid_t type. That type definition predated the libnvdimm
subsystem, so now is as a good a time as any to convert all the uuid
handling in the subsystem to uuid_t to match the helpers.
Note that the uuid fields in the label data and superblocks is not
replaced per Andy's expectation that uuid_t is a kernel internal type
not to appear in external ABI interfaces. So, in those case
{import,export}_uuid() is used to go between the 2 types.
Also note that this rework uncovered some unnecessary copies for label
comparisons, those are cleaned up with nsl_uuid_equal().
As for the whitespace changes, all new code is clang-format compliant.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116429748.2460985.15659993454313919977.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The general convention for pcibios_* hooks is that they're named after the
corresponding pci_* function they provide a hook for. The exception is
pcibios_add_device() which provides a hook for pci_device_add().
Rename pcibios_add_device() to pcibios_device_add() so it matches
pci_device_add().
Also, remove the export of the microblaze version. The only caller must be
compiled as a built-in so there's no reason for the export.
Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
|
|
The changes in the patch series [1] introduced a terminating null byte
when reading from cpulist or cpumap sysfs files, for example:
$ xxd /sys/devices/system/node/node0/cpulist
00000000: 302d 310a 00 0-1..
Before this change, the output looked as follows:
$ xxd /sys/devices/system/node/node0/cpulist
00000000: 302d 310a 0-1.
Fix this regression by excluding the terminating null byte from the
returned length in cpumap_print_list_to_buf and
cpumap_print_bitmask_to_buf.
[1] https://lore.kernel.org/all/20210806110251.560-1-song.bao.hua@hisilicon.com/
Fixes: 1fae562983ca ("cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list")
Acked-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20210916222705.13554-1-tklauser@distanz.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for putting the PHY into IDDQ Soft Recovery mode by setting
the TOP_MISC register bits accordingly. This requires us to implement a
custom bcm54xx_suspend() routine which diverges from genphy_suspend() in
order to configure the PHY to enter IDDQ with software recovery as well
as avoid doing a read/modify/write on the BMCR register.
Doing a read/modify/write on the BMCR register means that the
auto-negotation bit may remain which interferes with the ability to put
the PHY into IDDQ-SR mode. We do software reset upon suspend in order to
put the PHY back into its state prior to suspend as recommended by the
datasheet.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Let's add handling the otg force idle quirk for the old omap2430 glue layer
used up to omap4 as the musb driver quirk only works if the driver is
loaded. Unlike with the am335x glue layer, looks like we don't need the
quirk handling for SYSC_QUIRK_REINIT_ON_CTX_LOST.
Eventually when all the musb using SoCs are booting with device tree based
configuration, we can just remove the related quirk handling from the
musb driver.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
At least am335x gpmc module needs a reset in addition to re-init on resume.
Let's add a quirk handling for reset on re-init.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Some interconnect target modules such as otg and gpmc on am335x need a
re-init after resume. As we also have PM runtime cases where the context
may be lost, let's handle these all with cpu_pm.
For the am335x resume path, we already have cpu_pm_resume() call
cpu_pm_cluster_exit().
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Passing NULL to PTR_ERR will result in 0 (success), also since the likes of
bt_skb_sendmsg does never return NULL it is safe to replace the instances of
IS_ERR_OR_NULL with IS_ERR when checking its return.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This moves functions manipulating EIR/Adv Data to its own file so it
can be reused by other files.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The max_namelen field is unnecessary, as it is set to 255 (NAME_MAX) on
all filesystems that support fscrypt (or plan to support fscrypt). For
simplicity, just use NAME_MAX directly instead.
Link: https://lore.kernel.org/r/20210909184513.139281-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Pull AFS fixes from David Howells:
"Fixes for AFS problems that can cause data corruption due to
interaction with another client modifying data cached locally:
- When d_revalidating a dentry, don't look at the inode to which it
points. Only check the directory to which the dentry belongs. This
was confusing things and causing the silly-rename cleanup code to
remove the file now at the dentry of a file that got deleted.
- Fix mmap data coherency. When a callback break is received that
relates to a file that we have cached, the data content may have
been changed (there are other reasons, such as the user's rights
having been changed). However, we're checking it lazily, only on
entry to the kernel, which doesn't happen if we have a writeable
shared mapped page on that file.
We make the kernel keep track of mmapped files and clear all PTEs
mapping to that file as soon as the callback comes in by calling
unmap_mapping_pages() (we don't necessarily want to zap the
pagecache). This causes the kernel to be reentered when userspace
tries to access the mmapped address range again - and at that point
we can query the server and, if we need to, zap the page cache.
Ideally, I would check each file at the point of notification, but
that involves poking the server[*] - which is holding an exclusive
lock on the vnode it is changing, waiting for all the clients it
notified to reply. This could then deadlock against the server.
Further, invalidating the pagecache might call ->launder_page(),
which would try to write to the file, which would definitely
deadlock. (AFS doesn't lease file access).
[*] Checking to see if the file content has changed is a matter of
comparing the current data version number, but we have to ask
the server for that. We also need to get a new callback promise
and we need to poke the server for that too.
- Add some more points at which the inode is validated, since we're
doing it lazily, notably in ->read_iter() and ->page_mkwrite(), but
also when performing some directory operations.
Ideally, checking in ->read_iter() would be done in some derivation
of filemap_read(). If we're going to call the server to read the
file, then we get the file status fetch as part of that.
- The above is now causing us to make a lot more calls to
afs_validate() to check the inode - and afs_validate() takes the
RCU read lock each time to make a quick check (ie.
afs_check_validity()). This is entirely for the purpose of checking
cb_s_break to see if the server we're using reinitialised its list
of callbacks - however this isn't a very common event, so most of
the time we're taking this needlessly.
Add a new cell-wide counter to count the number of
reinitialisations done by any server and check that - and only if
that changes, take the RCU read lock and check the server list (the
server list may change, but the cell a file is part of won't).
- Don't update vnode->cb_s_break and ->cb_v_break inside the validity
checking loop. The cb_lock is done with read_seqretry, so we might
go round the loop a second time after resetting those values - and
that could cause someone else checking validity to miss something
(I think).
Also included are patches for fixes for some bugs encountered whilst
debugging this:
- Fix a leak of afs_read objects and fix a leak of keys hidden by
that.
- Fix a leak of pages that couldn't be added to extend a writeback.
- Fix the maintenance of i_blocks when i_size is changed by a local
write or a local dir edit"
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217 [1]
Link: https://lore.kernel.org/r/163111665183.283156.17200205573146438918.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163113612442.352844.11162345591911691150.stgit@warthog.procyon.org.uk/ # i_blocks patch
* tag 'afs-fixes-20210913' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix updating of i_blocks on file/dir extension
afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server
afs: Try to avoid taking RCU read lock when checking vnode validity
afs: Fix mmap coherency vs 3rd-party changes
afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation
afs: Add missing vnode validation checks
afs: Fix page leak
afs: Fix missing put on afs_read objects and missing get on the key therein
|
|
Pull cifs client fixes from Steve French:
- two deferred close fixes (for bugs found with xfstests 478 and 461)
- a deferred close improvement in rename
- two trivial fixes for incorrect Linux comment formatting of multiple
cifs files (pointed out by automated kernel test robot and
checkpatch)
* tag '5.15-rc1-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Not to defer close on file when lock is set
cifs: Fix soft lockup during fsstress
cifs: Deferred close performance improvements
cifs: fix incorrect kernel doc comments
cifs: remove pathname for file from SPDX header
|
|
The function __bad_area_nosemaphore() calls kernelmode_fixup_or_oops()
with the parameter @signal being actually @pkey, which will send a
signal numbered with the argument in @pkey.
This bug can be triggered when the kernel fails to access user-given
memory pages that are protected by a pkey, so it can go down the
do_user_addr_fault() path and pass the !user_mode() check in
__bad_area_nosemaphore().
Most cases will simply run the kernel fixup code to make an -EFAULT. But
when another condition current->thread.sig_on_uaccess_err is met, which
is only used to emulate vsyscall, the kernel will generate the wrong
signal.
Add a new parameter @pkey to kernelmode_fixup_or_oops() to fix this.
[ bp: Massage commit message, fix build error as reported by the 0day
bot: https://lkml.kernel.org/r/202109202245.APvuT8BX-lkp@intel.com ]
Fixes: 5042d40a264c ("x86/fault: Bypass no_context() for implicit kernel faults from usermode")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiashuo Liang <liangjs@pku.edu.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20210730030152.249106-1-liangjs@pku.edu.cn
|
|
In scenarios where containers are frequently created and deleted,
a large number of error logs maybe generated. The logs only show
which node is about to go over the max limit, not the node which
resource request failed. As misc.events has provided relevant
information, maybe we can remove this log.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Introduce misc.events to make it easier for us to understand
the pressure of resources. Currently only the 'max' event is
implemented, which indicates the times the resource is about
to exceeds the max limit.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
EDIDs have 32-bits worth of data which is intended to be used to
uniquely identify the make/model of a panel. This has historically
been used only internally in the EDID processing code to identify
quirks with panels.
We'd like to use this panel ID in panel drivers to identify which
panel is hooked up and from that information figure out power sequence
timings. Let's expose this information from the EDID code and also
allow it to be accessed early, before a connector has been created.
To make matching in the panel drivers code easier, we'll return the
panel ID as a 32-bit value. We'll provide some functions for
converting this value back and forth to something more human readable.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.3.I4a672175ba1894294d91d3dbd51da11a8239cf4a@changeid
|
|
The DP 2.0 128b/132b channel coding uses TX FFE presets instead of
vswing and pre-emphasis.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ba129c51aeb01a5f210de7026abe704a554a178.1631191763.git.jani.nikula@intel.com
|
|
DP 2.0 brings some new DPCD addresses for PHY repeaters.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/def17e2329722f22c35807be26b35590ccb93bfd.1631191763.git.jani.nikula@intel.com
|
|
The code is unreachable for HVM or PVH, and it also makes little sense
in auto-translated environments. On Arm, with
xen_{create,destroy}_contiguous_region() both being stubs, I have a hard
time seeing what good the Xen specific variant does - the generic one
ought to be fine for all purposes there. Still Arm code explicitly
references symbols here, so the code will continue to be included there.
Instead of making PCI_XEN's "select" conditional, simply drop it -
SWIOTLB_XEN will be available unconditionally in the PV case anyway, and
is - as explained above - dead code in non-PV environments.
This in turn allows dropping the stubs for
xen_{create,destroy}_contiguous_region(), the former of which was broken
anyway - it failed to set the DMA handle output.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/5947b8ae-fdc7-225c-4838-84712265fc1e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Hi,
SOF is marking all componet drivers with module_get_upon_open = 1 which works
fine with normal PCM streams, however on compressed side the module get upon
open is not supported. The module_get works when module_get_upon_open is not set
becasue the snd_soc_component_module_get_when_probe() will pass NULL for the
substream parameter of snd_soc_component_module_get().
In order to re-use the existing infrastructure for module_get, the proposal is
to convert the mark_module to void pointer (like the pm mark) and implement
matching code for the compressed open/free to pcm open/close.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: soc-component: Convert the mark_module to void*
ASoC: compress/component: Use module_get_when_open/put_when_close for
cstream
include/sound/soc-component.h | 14 ++++----
sound/soc/soc-component.c | 61 +++++++++++++++--------------------
sound/soc/soc-compress.c | 43 +++++++++++++++++++++---
3 files changed, 71 insertions(+), 47 deletions(-)
--
2.33.0
|
|
Needed by Maarten's series "drm/i915: Short-term pinning and async
eviction".
Link: https://lists.freedesktop.org/archives/intel-gfx/2021-September/277870.html
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
Eric Dumazet
Paolo Abeni
Vladimir Oltean
Martin Blumenstingl
Piyush Mehta
Jaroslav Kysela
Thomas Zimmermann
Jiri Slaby
Sean Christopherson
Bixuan Cui
Leon Romanovsky
Dave Airlie
Hannes Reinecke
Bart Van Assche
Bjorn Andersson
Konrad Dybcio
Vladimir Lypak
AngeloGioacchino Del Regno
Deepak Kumar Singh
Dan Williams
Oliver O'Halloran
Tobias Klauser
Florian Fainelli
Tony Lindgren
Luiz Augusto von Dentz
Eric Biggers
Linus Torvalds
Jiashuo Liang
Chunguang Xu
Douglas Anderson
Jani Nikula
Jan Beulich
Mark Brown
Joonas Lahtinen