aboutsummaryrefslogtreecommitdiffstats
path: root/init/do_mounts.h (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-05-16xen-netback: pass hash value to the frontendPaul Durrant2-14/+77
My recent patch to include/xen/interface/io/netif.h defines a new extra info type that can be used to pass hash values between backend and guest frontend. This patch adds code to xen-netback to pass hash values calculated for guest receive-side packets (i.e. netback transmit side) to the frontend. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16xen-netback: add control protocol implementationPaul Durrant5-3/+502
My recent patch to include/xen/interface/io/netif.h defines a new shared ring (in addition to the rx and tx rings) for passing control messages from a VM frontend driver to a backend driver. A previous patch added the necessary boilerplate for mapping the control ring from the frontend, should it be created. This patch adds implementations for each of the defined protocol messages. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16xen-netback: add control ring boilerplatePaul Durrant4-30/+277
My recent patch to include/xen/interface/io/netif.h defines a new shared ring (in addition to the rx and tx rings) for passing control messages from a VM frontend driver to a backend driver. This patch adds the necessary code to xen-netback to map this new shared ring, should it be created by a frontend, but does not add implementations for any of the defined protocol messages. These are added in a subsequent patch for clarity. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16net: cls_u32: Add support for skip-sw flag to tc u32 classifier.Samudrala, Sridhar3-9/+54
On devices that support TC U32 offloads, this flag enables a filter to be added only to HW. skip-sw and skip-hw are mutually exclusive flags. By default without any flags, the filter is added to both HW and SW, but no error checks are done in case of failure to add to HW. With skip-sw, failure to add to HW is treated as an error. Here is a sample script that adds 2 filters, one with skip-sw and the other with skip-hw flag. # add ingress qdisc tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # add u32 filter with skip-sw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: flowid 800:1 \ skip-sw \ match ip src 192.168.1.0/24 \ action drop # add u32 filter with skip-hw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: flowid 800:2 \ skip-hw \ match ip src 192.168.2.0/24 \ action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16net: sched: Move TCA_CLS_FLAGS_SKIP_HW to uapi header file.Samudrala, Sridhar2-3/+3
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: set nvdev link after populating chn_tableVitaly Kuznetsov1-11/+18
Crash in netvsc_send() is observed when netvsc device is re-created on mtu change/set channels. The crash is caused by dereferencing of NULL channel pointer which comes from chn_table. The root cause is a mixture of two facts: - we set nvdev pointer in net_device_context in alloc_net_device() before we populate chn_table. - we populate chn_table[0] only. The issue could be papered over by checking channel != NULL in netvsc_send() but populating the whole chn_table and writing the nvdev pointer afterwards seems more appropriate. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: synchronize netvsc_change_mtu()/netvsc_set_channels() with netvsc_remove()Vitaly Kuznetsov1-2/+7
When netvsc device is removed during mtu change or channels setup we get into troubles as both paths are trying to remove the device. Synchronize them with start_remove flag and rtnl lock. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: get rid of struct net_device pointer in struct netvsc_deviceVitaly Kuznetsov4-64/+72
Simplify netvsvc pointer graph by getting rid of the redundant ndev pointer. We can always get a pointer to struct net_device from somewhere else. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: untangle the pointer messVitaly Kuznetsov4-122/+99
We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: use start_remove flag to protect netvsc_link_change()Vitaly Kuznetsov1-4/+17
netvsc_link_change() can race with netvsc_change_mtu() or netvsc_set_channels() as these functions destroy struct netvsc_device and rndis filter. Use start_remove flag for syncronization. As netvsc_change_mtu()/netvsc_set_channels() are called with rtnl lock held we need to take it before checking start_remove value in netvsc_link_change(). Reported-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: move start_remove flag to net_device_contextVitaly Kuznetsov3-6/+13
struct netvsc_device is destroyed on mtu change so keeping the protection flag there is not a good idea. Move it to struct net_device_context which is preserved. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16phy: add support for a reset-gpio specificationUwe Kleine-König2-0/+11
The framework only asserts (for now) that the reset gpio is not active. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Use dma_rmb() instead of rmb().Michael Chan1-1/+1
Use the weaker but more appropriate dma_rmb() to order the reading of the completion ring. Suggested-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Add BCM57314 device ID.Michael Chan1-0/+3
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Simplify and improve unsupported SFP+ module reporting.Michael Chan2-37/+30
The current code is more complicated than necessary and can only report unsupported SFP+ module if it is plugged in after the device is up. Rename bnxt_port_module_event() to bnxt_get_port_module_status(). We already have the current module_status in the link_info structure, so just check that and report any unsupported SFP+ module status. Delete the unnecessary last_port_module_event. Call this function at the end of bnxt_open to report unsupported module already plugged in. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Fix length value in dmesg log firmware error message.Michael Chan1-1/+1
The len value in the hwrm error message is wrong. Use the properly adjusted value in the variable len. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Improve the delay logic for firmware response.Michael Chan1-9/+10
The current code has 2 problems: 1. The maximum wait time is not long enough. It is about 60% of the duration specified by the firmware. It is calling usleep_range(600, 800) for every 1 msec we are supposed to wait. 2. The granularity of the delay is too coarse. Many simple firmware commands finish in 25 usec or less. We fix these 2 issues by multiplying the original 1 msec loop counter by 40 and calling usleep_range(25, 40) for each iteration. There is also a second delay loop to wait for the last DMA word to complete. This delay loop should be a very short 5 usec wait. This change results in much faster bring-up/down time: Before the patch: time ip link set p4p1 up real 0m0.120s user 0m0.001s sys 0m0.009s After the patch: time ip link set p4p1 up real 0m0.030s user 0m0.000s sys 0m0.010s Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Reduce maximum ring pages if page size is 64K.Michael Chan1-0/+7
The chip supports 4K/8K/64K page sizes for the rings and we try to match it to the CPU PAGE_SIZE. The current page size limits for the rings are based on 4K/8K page size. If the page size is 64K, these limits are too large. Reduce them appropriately. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Report PCIe link speed and width during driver loadAjit Khaparde1-0/+18
Add code to log a message during driver load indicating PCIe link speed and width. The log message will look like this: bnxt_en 0000:86:00.0 eth0: PCIe: Speed 8.0GT/s Width x8 Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPROAjit Khaparde4-0/+167
Add support to fetch the SFP EEPROM settings from the firmware and display it via the ethtool -m command. We support SFP+ and QSFP modules. v2: Fixed a bug in bnxt_get_module_eeprom() found by Ben Hutchings. Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Fix invalid max channel parameter in ethtool -l.Satish Baddipadige1-1/+5
When there is only 1 MSI-X vector or in INTA mode, tx and rx pre-set max channel parameters are shown incorrectly in ethtool -l. With only 1 vector, bnxt_get_max_rings() will return -ENOMEM. bnxt_get_channels should check this return value, and set max_rx/max_tx to 0 if it is non-zero. Signed-off-by: Satish Baddipadige <sbaddipa@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14net: switchdev: Drop EXPERIMENTAL from descriptionFlorian Fainelli1-1/+1
Switchdev has been around for quite a while now, putting "EXPERIMENTAL" in the description is no longer accurate, drop it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14arm64: bpf: jit JMP_JSET_{X,K}Zi Shen Lim1-0/+1
Original implementation commit e54bcde3d69d ("arm64: eBPF JIT compiler") had the relevant code paths, but due to an oversight always fail jiting. As a result, we had been falling back to BPF interpreter whenever a BPF program has JMP_JSET_{X,K} instructions. With this fix, we confirm that the corresponding tests in lib/test_bpf continue to pass, and also jited. ... [ 2.784553] test_bpf: #30 JSET jited:1 188 192 197 PASS [ 2.791373] test_bpf: #31 tcpdump port 22 jited:1 325 677 625 PASS [ 2.808800] test_bpf: #32 tcpdump complex jited:1 323 731 991 PASS ... [ 3.190759] test_bpf: #237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS [ 3.192524] test_bpf: #238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS [ 3.211014] test_bpf: #249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS [ 3.212973] test_bpf: #250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS ... Fixes: e54bcde3d69d ("arm64: eBPF JIT compiler") Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14net/route: enforce hoplimit max valuePaolo Abeni2-0/+4
Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14nf_conntrack: avoid kernel pointer value leak in slab nameLinus Torvalds1-1/+3
The slab name ends up being visible in the directory structure under /sys, and even if you don't have access rights to the file you can see the filenames. Just use a 64-bit counter instead of the pointer to the 'net' structure to generate a unique name. This code will go away in 4.7 when the conntrack code moves to a single kmemcache, but this is the backportable simple solution to avoiding leaking kernel pointers to user space. Fixes: 5b3501faa874 ("netfilter: nf_conntrack: per netns nf_conntrack_cachep") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14i40e: fix an uninitialized variable bugDan Carpenter1-1/+1
We removed this initialization but it is required. Let's put it back. Fixes: 895106a577c4 ('i40e: trivial fixes') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-14i40e: Bump version from 1.5.10 to 1.5.16Bimmy Pujari1-1/+1
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-14i40e: don't add broadcast filter for VFsMitch Williams1-8/+0
Now that all VSIs are configured to receive broadcasts as default, we don't need to add a filter. This eliminates an annoying but harmless error message each time VFs are created or reset. Change-ID: I4cd6339684df45b0d2722133eeb84c14fa93ea19 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-14i40e/i40evf: properly report Rx packet hashMitch Williams1-1/+1
This logic is inverted. If the RXHASH flag is set, then we should go ahead and call skb_set_hash. Change-ID: Ib2e30356dced1d3e939c8061ab6ad5bd94197e7c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-14i40e: set context to use VSI RSS LUT for SR-IOVAshish Shah1-1/+2
For the SR-IOV VSIs, when the queue filtering section is valid, the RSS LUT needs to be set to use the VSI specific lookup table (otherwise it will use the PF RSS LUT table). Change-ID: Ia9377cc818078238a75c3bdeade1b593a91b3480 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Correct UDP packet header for non_tunnel-ipv6Akeem G Abodunrin1-1/+1
This patch corrects Rx ptype payload layer for non_tunneled ipv6. It should be layer 4 for UDP, instead of layer 3. Change-ID: I9382e4458ab3c4e58f6d2e9f195d5d4ee513805e Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: change Rx hang message into a WARN_ONCEJacob Keller1-3/+1
Use WARN_ONCE in order to highlight the issue, but don't display a warning every time. The user should be able to see the ethtool counter we created if necessary to see how often it is occurring. Change-ID: I40c4ea159819b64a7d33b7f5716749089791533a Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Refactor ethtool get_settingsCatherine Sullivan1-123/+135
Previously we were only looking at the FW supported PHY types if link was down, because we want to be more specific when link is up. This refactor changes this. When link is down, we still rely on the FW supported PHY types, but when link is up, we select the possible supported link modes from what we know about the current PHY type, and AND that with the FW supported PHY types. Change-ID: Ice5dad83f2a17932b0b8b59f07439696ad6aa013 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: lie to the VFMitch Williams1-3/+7
If an untrusted VF attempts to configure promiscuous mode, log a message pointing out its naughty behavior. But then, instead of returning an error to the offender, just lie to it and say everything's OK. It will continue on its way, thinking it's in promiscuous mode, but receiving no packets except its own. Change-ID: I63369215b1720f3c531eedfc06af86ff8c0e3dc8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Add vf-true-promisc-support priv flagAnjali Singhai Jain6-18/+111
This patch adds priv-flag knob to configure global true promisc support. With this patch the user can decide the flavor of promiscuous that the VFs will see when promiscuous mode is enabled on the interface. Since this a global setting for the whole device, the priv-flag is exposed only on the first PF of the device. The default is true promisc support is off, which means the promisc mode for the VF will be limited/defport mode. For the PF, we still will be in limited promisc unless in MFP mode irrespective of the flavor picked through this knob. Usage: On PF0 ethtool --show-priv-flags p261p1 Private flags for p261p1: MFP : off LinkPolling : off flow-director-atr : on veb-stats : off hw-atr-eviction : off vf-true-promisc-support: off to enable setting true promisc ethtool --set-priv-flags p261p1 vf-true-promisc-support on At this point if the VF is set to trust and promisc is enabled on the VF through ip link set ... promisc on The VF/VFs will be able to see ALL ingress traffic Change-Id: I8fac4b6eb1af9ca77b5376b79c50bdce5055bd94 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Implement the API function for aq_set_switch_configShannon Nelson2-0/+33
Add the support code for calling the AdminQ API call aq_set_switch_config Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Add allmulti support for the VFAnjali Singhai Jain3-3/+30
This patch enables a feature to enable/disable all multicast for a trusted VF. Change-Id: I926eba7f8850c8d40f8ad7e08bbe4056bbd3985f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Add support for disabling all link and change bits needed for PHY interactionsKevin Scott3-2/+7
Add flag to tell firmware to disable link on all ports. This patch changes the bits set for telling firmware the PHY needs to be modified by driver. Without this patch, the setting will only set that mode for the current port on the device. Because the MDIO interface is common for the copper device. The command needs to set the mode for all ports. Change-ID: I8baa7da91d384291ac95b41ae1a516604f8eb67f Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13drivers: net: xgene: fix register offsetIyappan Subramanian2-4/+4
This patch fixes SG_RX_DV_GATE_REG_0_ADDR register offset and ring state field lengths. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13drivers: net: xgene: fix statistics counters race conditionIyappan Subramanian4-19/+53
This patch fixes the race condition on updating the statistics counters by moving the counters to the ring structure. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13drivers: net: xgene: fix ununiform latency across queuesIyappan Subramanian2-11/+27
This patch addresses ununiform latency across queues by adding more queues to match with, upto number of CPU cores. Also, number of interrupts are increased and the channel numbers are reordered. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13drivers: net: xgene: fix sharing of irqsIyappan Subramanian1-2/+2
Since hardware doesn't allow sharing of interrupts, this patch fixes the same by removing IRQF_SHARED flag. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13drivers: net: xgene: fix IPv4 forward crashIyappan Subramanian2-5/+8
This patch fixes the crash observed during IPv4 forward test by setting the drop field in the dbptr. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13e1000e: don't modify SYSTIM registers during SIOCSHWTSTAMP ioctlJacob Keller3-16/+55
The e1000e_config_hwtstamp function was incorrectly resetting the SYSTIM registers every time the ioctl was being run. If you happened to be running ptp4l and lost the PTP connect (removing cable, or blocking the UDP traffic for example), then ptp4l will eventually perform a restart which involves re-requesting timestamp settings. In e1000e this has the unfortunate and incorrect result of resetting SYSTIME to the kernel time. Since kernel time is usually in UTC, and PTP time is in TAI, this results in the leap second being re-applied. Fix this by extracting the SYSTIME reset out into its own function, e1000e_ptp_reset, which we call during reset to restore the hardware registers. This function will (a) restart the timecounter based on the new system time, (b) restore the previous PPB setting, and (c) restore the previous hwtstamp settings. In order to perform (b), I had to modify the adjfreq ptp function pointer to store the old delta each time it is called. This also has the side effect of restoring the correct base timinca register correctly. The driver does not need to explicitly zero the ptp_delta variable since the entire adapter structure comes zero-initialized. Reported-by: Brian Walsh <brian@walsh.ws> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Brian Walsh <brian@walsh.ws> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13igb/igbvf: Add support for GSO partialAlexander Duyck2-116/+203
This patch adds support for partial GSO segmentation in the case of tunnels. Specifically with this change the driver an perform segmentation as long as the frame either has IPv6 inner headers, or we are allowed to mangle the IP IDs on the inner header. This is needed because we will not be modifying any fields from the start of the start of the outer transport header to the start of the inner transport header as we are treating them like they are just a block of IP options. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13e1000e: mark shifted values as unsignedJacob Keller1-4/+4
The E1000_ICH_NVM_SIG_MASK value is shifted, out to the 31st bit, which is the signed bit for signed constants. Mark these values as unsigned to prevent compiler warnings and issues on platforms which a different signed bit implementation. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13e1000e: use BIT() macro for bit definesJacob Keller10-142/+143
This prevents signed bitshift issues when the shift would overwrite the signed bit, and prevents making this mistake in the future when copying and modifying code. Use GENMASK or the unsigned postfix for cases which aren't suitable for BIT() macro. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13igbvf: use BIT() macro instead of shiftsJacob Keller5-10/+11
To prevent signed bitshift issues, and improve code readability, use the BIT() macro. Also make use of GENMASK or the unsigned postfix where this is more appropriate than BIT() Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13igbvf: remove unused variable and dead codeJacob Keller1-3/+1
The variable rdlen is set but never used, and thus setting it is dead code. Remove it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13igb: adjust PTP timestamps for Tx/Rx latencyNathan Sullivan2-0/+44
Table 7-62 on page 338 of the i210 datasheet lists TX and RX latencies for the various speeds the chip supports. To give better PTP timestamp accuracy, adjust the timestamps by the amounts Intel gives based on current link speed. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.