aboutsummaryrefslogtreecommitdiffstats
path: root/init (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-03netdevsim: remove unused sdev codeTaehee Yoo1-69/+0
sdev.c code is merged into dev.c and is not used anymore. it would be removed. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: use __GFP_NOWARN to avoid memalloc warningTaehee Yoo2-2/+2
vfnum buffer size and binary_len buffer size is received by user-space. So, this buffer size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the netdevsim module. So, this patch adds __GFP_NOWARN. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device echo 1000000000 > /sys/devices/netdevsim1/sriov_numvfs Splat looks like: [ 357.847266][ T1000] WARNING: CPU: 0 PID: 1000 at mm/page_alloc.c:4738 __alloc_pages_nodemask+0x2f3/0x740 [ 357.850273][ T1000] Modules linked in: netdevsim veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrx [ 357.852989][ T1000] CPU: 0 PID: 1000 Comm: bash Tainted: G B 5.5.0-rc5+ #270 [ 357.854334][ T1000] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 357.855703][ T1000] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 357.856669][ T1000] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 357.860272][ T1000] RSP: 0018:ffff8880b7f47bd8 EFLAGS: 00010246 [ 357.861009][ T1000] RAX: ffffed1016fe8f80 RBX: 1ffff11016fe8fae RCX: 0000000000000000 [ 357.861843][ T1000] RDX: 0000000000000000 RSI: 0000000000000017 RDI: 0000000000000000 [ 357.862661][ T1000] RBP: 0000000000040dc0 R08: 1ffff11016fe8f67 R09: dffffc0000000000 [ 357.863509][ T1000] R10: ffff8880b7f47d68 R11: fffffbfff2798180 R12: 1ffff11016fe8f80 [ 357.864355][ T1000] R13: 0000000000000017 R14: 0000000000000017 R15: ffff8880c2038d68 [ 357.865178][ T1000] FS: 00007fd9a5b8c740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 357.866248][ T1000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 357.867531][ T1000] CR2: 000055ce01ba8100 CR3: 00000000b7dbe005 CR4: 00000000000606f0 [ 357.868972][ T1000] Call Trace: [ 357.869423][ T1000] ? lock_contended+0xcd0/0xcd0 [ 357.870001][ T1000] ? __alloc_pages_slowpath+0x21d0/0x21d0 [ 357.870673][ T1000] ? _kstrtoull+0x76/0x160 [ 357.871148][ T1000] ? alloc_pages_current+0xc1/0x1a0 [ 357.871704][ T1000] kmalloc_order+0x22/0x80 [ 357.872184][ T1000] kmalloc_order_trace+0x1d/0x140 [ 357.872733][ T1000] __kmalloc+0x302/0x3a0 [ 357.873204][ T1000] nsim_bus_dev_numvfs_store+0x1ab/0x260 [netdevsim] [ 357.873919][ T1000] ? kernfs_get_active+0x12c/0x180 [ 357.874459][ T1000] ? new_device_store+0x450/0x450 [netdevsim] [ 357.875111][ T1000] ? kernfs_get_parent+0x70/0x70 [ 357.875632][ T1000] ? sysfs_file_ops+0x160/0x160 [ 357.876152][ T1000] kernfs_fop_write+0x276/0x410 [ 357.876680][ T1000] ? __sb_start_write+0x1ba/0x2e0 [ 357.877225][ T1000] vfs_write+0x197/0x4a0 [ 357.877671][ T1000] ksys_write+0x141/0x1d0 [ ... ] Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: 79579220566c ("netdevsim: add SR-IOV functionality") Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfsTaehee Yoo3-14/+16
Debugfs APIs return valid pointer or error pointer. it doesn't return NULL. So, using IS_ERR is enough, not using IS_ERR_OR_NULL. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()Taehee Yoo1-1/+1
When netdevsim dev is being created, a debugfs directory is created. The variable "dev_ddir_name" is 16bytes device name pointer and device name is "netdevsim<dev id>". The maximum dev id length is 10. So, 16bytes for device name isn't enough. Test commands: modprobe netdevsim echo "1000000000 0" > /sys/bus/netdevsim/new_device Splat looks like: [ 249.622710][ T900] BUG: KASAN: stack-out-of-bounds in number+0x824/0x880 [ 249.623658][ T900] Write of size 1 at addr ffff88804c527988 by task bash/900 [ 249.624521][ T900] [ 249.624830][ T900] CPU: 1 PID: 900 Comm: bash Not tainted 5.5.0+ #322 [ 249.625691][ T900] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 249.626712][ T900] Call Trace: [ 249.627103][ T900] dump_stack+0x96/0xdb [ 249.627639][ T900] ? number+0x824/0x880 [ 249.628173][ T900] print_address_description.constprop.5+0x1be/0x360 [ 249.629022][ T900] ? number+0x824/0x880 [ 249.629569][ T900] ? number+0x824/0x880 [ 249.630105][ T900] __kasan_report+0x12a/0x170 [ 249.630717][ T900] ? number+0x824/0x880 [ 249.631201][ T900] kasan_report+0xe/0x20 [ 249.631723][ T900] number+0x824/0x880 [ 249.632235][ T900] ? put_dec+0xa0/0xa0 [ 249.632716][ T900] ? rcu_read_lock_sched_held+0x90/0xc0 [ 249.633392][ T900] vsnprintf+0x63c/0x10b0 [ 249.633983][ T900] ? pointer+0x5b0/0x5b0 [ 249.634543][ T900] ? mark_lock+0x11d/0xc40 [ 249.635200][ T900] sprintf+0x9b/0xd0 [ 249.635750][ T900] ? scnprintf+0xe0/0xe0 [ 249.636370][ T900] nsim_dev_probe+0x63c/0xbf0 [netdevsim] [ ... ] Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: ab1d0cc004d7 ("netdevsim: change debugfs tree topology") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: fix panic in nsim_dev_take_snapshot_write()Taehee Yoo2-2/+12
nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region. So, during this function, these data shouldn't be removed. But there is no protecting stuff in this function. There are two similar cases. 1. reload case reload could be called during nsim_dev_take_snapshot_write(). When reload is being executed, nsim_dev_reload_down() is called and it calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls devlink_region_destroy() to destroy nsim_dev->dummy_region. So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region() would be removed. At this point, snapshot_write() would access freed pointer. In order to fix this case, take_snapshot file will be removed before devlink_region_destroy(). The take_snapshot file will be re-created by ->reload_up(). 2. del_device_store case del_device_store() also could call nsim_dev_reload_destroy() during nsim_dev_take_snapshot_write(). If so, panic would occur. This problem is actually the same problem with the first case. So, this problem will be fixed by the first case's solution. Test commands: modprobe netdevsim while : do echo 1 > /sys/bus/netdevsim/new_device & echo 1 > /sys/bus/netdevsim/del_device & devlink dev reload netdevsim/netdevsim1 & echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot & done Splat looks like: [ 45.564513][ T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI [ 45.566131][ T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7] [ 45.566135][ T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322 [ 45.569020][ T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 45.569026][ T975] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 45.570518][ T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 45.570522][ T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206 [ 45.572305][ T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 45.572308][ T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0 [ 45.576843][ T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000 [ 45.576847][ T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000 [ 45.578471][ T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168 [ 45.578475][ T975] FS: 00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000 [ 45.581492][ T975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.582942][ T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0 [ 45.584543][ T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.586633][ T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.589889][ T975] Call Trace: [ 45.591445][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.601250][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.602817][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.603875][ T975] ? mark_held_locks+0xa5/0xe0 [ 45.604769][ T975] ? _raw_spin_unlock_irqrestore+0x2d/0x50 [ 45.606147][ T975] ? __mutex_unlock_slowpath+0xd0/0x670 [ 45.607723][ T975] ? crng_backtrack_protect+0x80/0x80 [ 45.613530][ T975] ? wait_for_completion+0x390/0x390 [ 45.615152][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.616834][ T975] devlink_region_snapshot_create+0x55/0x4a0 [ ... ] Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: disable devlink reload when resources are being usedTaehee Yoo2-0/+21
devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: fix using uninitialized resourcesTaehee Yoo2-3/+41
When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03bnxt_en: Fix TC queue mapping.Michael Chan1-1/+1
The driver currently only calls netdev_set_tc_queue when the number of TCs is greater than 1. Instead, the comparison should be greater than or equal to 1. Even with 1 TC, we need to set the queue mapping. This bug can cause warnings when the number of TCs is changed back to 1. Fixes: 7809592d3e2e ("bnxt_en: Enable MSIX early in bnxt_init_one().") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03bnxt_en: Fix logic that disables Bus Master during firmware reset.Vasundhara Volam1-4/+7
The current logic that calls pci_disable_device() in __bnxt_close_nic() during firmware reset is flawed. If firmware is still alive, we're disabling the device too early, causing some firmware commands to not reach the firmware. Fix it by moving the logic to bnxt_reset_close(). If firmware is in fatal condition, we call pci_disable_device() before we free any of the rings to prevent DMA corruption of the freed rings. If firmware is still alive, we call pci_disable_device() after the last firmware message has been sent. Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.Michael Chan1-2/+5
bnxt_ulp_start() needs to be called before SRIOV is re-enabled after firmware reset. Re-enabling SRIOV may consume all the resources and may cause the RDMA driver to fail to get MSIX and other resources. Fix it by calling bnxt_ulp_start() first before calling bnxt_reenable_sriov(). We re-arrange the logic so that we call bnxt_ulp_start() and bnxt_reenable_sriov() in proper sequence in bnxt_fw_reset_task() and bnxt_open(). The former is the normal coordinated firmware reset sequence and the latter is firmware reset while the function is down. This new logic is now more straight forward and will now fix both scenarios. Fixes: f3a6d206c25a ("bnxt_en: Call bnxt_ulp_stop()/bnxt_ulp_start() during error recovery.") Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.Michael Chan1-7/+12
Put the current logic in bnxt_open() to re-enable SRIOV after detecting firmware reset into a new function bnxt_reenable_sriov(). This call needs to be invoked in the firmware reset path also in the next patch. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03net: stmmac: Delete txtimer in suspend()Nicolin Chen1-0/+4
When running v5.5 with a rootfs on NFS, memory abort may happen in the system resume stage: Unable to handle kernel paging request at virtual address dead00000000012a [dead00000000012a] address between user and kernel address ranges pc : run_timer_softirq+0x334/0x3d8 lr : run_timer_softirq+0x244/0x3d8 x1 : ffff800011cafe80 x0 : dead000000000122 Call trace: run_timer_softirq+0x334/0x3d8 efi_header_end+0x114/0x234 irq_exit+0xd0/0xd8 __handle_domain_irq+0x60/0xb0 gic_handle_irq+0x58/0xa8 el1_irq+0xb8/0x180 arch_cpu_idle+0x10/0x18 do_idle+0x1d8/0x2b0 cpu_startup_entry+0x24/0x40 secondary_start_kernel+0x1b4/0x208 Code: f9000693 a9400660 f9000020 b4000040 (f9000401) ---[ end trace bb83ceeb4c482071 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 2-3 Kernel Offset: disabled CPU features: 0x00002,2300aa30 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- It's found that stmmac_xmit() and stmmac_resume() sometimes might run concurrently, possibly resulting in a race condition between mod_timer() and setup_timer(), being called by stmmac_xmit() and stmmac_resume() respectively. Since the resume() runs setup_timer() every time, it'd be safer to have del_timer_sync() in the suspend() as the counterpart. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnectDavid Howells5-24/+15
When a call is disconnected, the connection pointer from the call is cleared to make sure it isn't used again and to prevent further attempted transmission for the call. Unfortunately, there might be a daemon trying to use it at the same time to transmit a packet. Fix this by keeping call->conn set, but setting a flag on the call to indicate disconnection instead. Remove also the bits in the transmission functions where the conn pointer is checked and a ref taken under spinlock as this is now redundant. Fixes: 8d94aa381dab ("rxrpc: Calls shouldn't hold socket refs") Signed-off-by: David Howells <dhowells@redhat.com>
2020-02-02selftests: net: Add FIN_ACK processing order related latency spike testSeongJae Park4-0/+189
This commit adds a test for FIN_ACK process races related reconnection latency spike issues. The issue has described and solved by the previous commit ("tcp: Reduce SYN resend delay if a suspicous ACK is received"). The test program is configured with a server and a client process. The server creates and binds a socket to a port that dynamically allocated, listen on it, and start a infinite loop. Inside the loop, it accepts connection, reads 4 bytes from the socket, and closes the connection. The client is constructed as an infinite loop. Inside the loop, it creates a socket with LINGER and NODELAY option, connect to the server, send 4 bytes data, try read some data from server. After the read() returns, it measure the latency from the beginning of this loop to this point and if the latency is larger than 1 second (spike), print a message. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02tcp: Reduce SYN resend delay if a suspicous ACK is receivedSeongJae Park1-1/+7
When closing a connection, the two acks that required to change closing socket's status to FIN_WAIT_2 and then TIME_WAIT could be processed in reverse order. This is possible in RSS disabled environments such as a connection inside a host. For example, expected state transitions and required packets for the disconnection will be similar to below flow. 00 (Process A) (Process B) 01 ESTABLISHED ESTABLISHED 02 close() 03 FIN_WAIT_1 04 ---FIN--> 05 CLOSE_WAIT 06 <--ACK--- 07 FIN_WAIT_2 08 <--FIN/ACK--- 09 TIME_WAIT 10 ---ACK--> 11 LAST_ACK 12 CLOSED CLOSED In some cases such as LINGER option applied socket, the FIN and FIN/ACK will be substituted to RST and RST/ACK, but there is no difference in the main logic. The acks in lines 6 and 8 are the acks. If the line 8 packet is processed before the line 6 packet, it will be just ignored as it is not a expected packet, and the later process of the line 6 packet will change the status of Process A to FIN_WAIT_2, but as it has already handled line 8 packet, it will not go to TIME_WAIT and thus will not send the line 10 packet to Process B. Thus, Process B will left in CLOSE_WAIT status, as below. 00 (Process A) (Process B) 01 ESTABLISHED ESTABLISHED 02 close() 03 FIN_WAIT_1 04 ---FIN--> 05 CLOSE_WAIT 06 (<--ACK---) 07 (<--FIN/ACK---) 08 (fired in right order) 09 <--FIN/ACK--- 10 <--ACK--- 11 (processed in reverse order) 12 FIN_WAIT_2 Later, if the Process B sends SYN to Process A for reconnection using the same port, Process A will responds with an ACK for the last flow, which has no increased sequence number. Thus, Process A will send RST, wait for TIMEOUT_INIT (one second in default), and then try reconnection. If reconnections are frequent, the one second latency spikes can be a big problem. Below is a tcpdump results of the problem: 14.436259 IP 127.0.0.1.45150 > 127.0.0.1.4242: Flags [S], seq 2560603644 14.436266 IP 127.0.0.1.4242 > 127.0.0.1.45150: Flags [.], ack 5, win 512 14.436271 IP 127.0.0.1.45150 > 127.0.0.1.4242: Flags [R], seq 2541101298 /* ONE SECOND DELAY */ 15.464613 IP 127.0.0.1.45150 > 127.0.0.1.4242: Flags [S], seq 2560603644 This commit mitigates the problem by reducing the delay for the next SYN if the suspicous ACK is received while in SYN_SENT state. Following commit will add a selftest, which can be also helpful for understanding of this issue. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02MAINTAINERS: correct entries for ISDN/mISDN sectionLukas Bulwahn1-2/+4
Commit 6d97985072dc ("isdn: move capi drivers to staging") cleaned up the isdn drivers and split the MAINTAINERS section for ISDN, but missed to add the terminal slash for the two directories mISDN and hardware. Hence, all files in those directories were not part of the new ISDN/mISDN SUBSYSTEM, but were considered to be part of "THE REST". Rectify the situation, and while at it, also complete the section with two further build files that belong to that subsystem. This was identified with a small script that finds all files belonging to "THE REST" according to the current MAINTAINERS file, and I investigated upon its output. Fixes: 6d97985072dc ("isdn: move capi drivers to staging") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01cls_rsvp: fix rsvp_policyEric Dumazet1-4/+2
NLA_BINARY can be confusing, since .len value represents the max size of the blob. cls_rsvp really wants user space to provide long enough data for TCA_RSVP_DST and TCA_RSVP_SRC attributes. BUG: KMSAN: uninit-value in rsvp_get net/sched/cls_rsvp.h:258 [inline] BUG: KMSAN: uninit-value in gen_handle net/sched/cls_rsvp.h:402 [inline] BUG: KMSAN: uninit-value in rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572 CPU: 1 PID: 13228 Comm: syz-executor.1 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 rsvp_get net/sched/cls_rsvp.h:258 [inline] gen_handle net/sched/cls_rsvp.h:402 [inline] rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572 tc_new_tfilter+0x31fe/0x5010 net/sched/cls_api.c:2104 rtnetlink_rcv_msg+0xcb7/0x1570 net/core/rtnetlink.c:5415 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45b349 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f269d43dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f269d43e6d4 RCX: 000000000045b349 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000009c2 R14: 00000000004cb338 R15: 000000000075bfd4 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 6fa8c0144b77 ("[NET_SCHED]: Use nla_policy for attribute validation in classifiers") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01MAINTAINERS: Orphan HSR network protocolSven Eckelmann1-2/+1
The current maintainer Arvid Brodin <arvid.brodin@alten.se> hasn't contributed to the kernel since 2015-02-27. His company mail address is also bouncing and the company confirmed (2020-01-31) that no Arvid Brodin is working for them: > Vi har dessvärre ingen Arvid Brodin som arbetar på ALTEN. A MIA person cannot be the maintainer. It is better to mark is as orphaned until some other person can jump in and take over the responsibility for HSR. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01qed: Fix a error code in qed_hw_init()Dan Carpenter1-0/+1
If the qed_fw_overlay_mem_alloc() then we should return -ENOMEM instead of success. Fixes: 30d5f85895fa ("qed: FW 8.42.2.0 Add fw overlay feature") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01octeontx2-pf: Fix an IS_ERR() vs NULL bugDan Carpenter1-2/+2
The otx2_mbox_get_rsp() function never returns NULL, it returns error pointers on error. Fixes: 34bfe0ebedb7 ("octeontx2-pf: MTU, MAC and RX mode config support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31tcp: clear tp->segs_{in|out} in tcp_disconnect()Eric Dumazet1-0/+2
tp->segs_in and tp->segs_out need to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: 2efd055c53c0 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <mleitner@redhat.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31tcp: clear tp->data_segs{in|out} in tcp_disconnect()Eric Dumazet1-0/+2
tp->data_segs_in and tp->data_segs_out need to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: a44d6eacdaf5 ("tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31tcp: clear tp->delivered in tcp_disconnect()Eric Dumazet1-0/+1
tp->delivered needs to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: ddf1af6fa00e ("tcp: new delivery accounting") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31tcp: clear tp->total_retrans in tcp_disconnect()Eric Dumazet1-0/+1
total_retrans needs to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: SeongJae Park <sjpark@amazon.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31netfilter: nf_flowtable: fix documentationMatteo Croce1-1/+1
In the flowtable documentation there is a missing semicolon, the command as is would give this error: nftables.conf:5:27-33: Error: syntax error, unexpected devices, expecting newline or semicolon hook ingress priority 0 devices = { br0, pppoe-data }; ^^^^^^^ nftables.conf:4:12-13: Error: invalid hook (null) flowtable ft { ^^ Fixes: 19b351f16fd9 ("netfilter: add flowtable documentation") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31netfilter: flowtable: Fix setting forgotten NF_FLOW_HW_DEAD flagPaul Blakey1-0/+1
During the refactor this was accidently removed. Fixes: ae29045018c8 ("netfilter: flowtable: add nf_flow_offload_tuple() helper") Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31netfilter: flowtable: Fix missing flush hardware on table freePaul Blakey1-0/+1
If entries exist when freeing a hardware offload enabled table, we queue work for hardware while running the gc iteration. Execute it (flush) after queueing. Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support") Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31netfilter: flowtable: Fix hardware flush order on nf_flow_table_cleanupPaul Blakey1-1/+1
On netdev down event, nf_flow_table_cleanup() is called for the relevant device and it cleans all the tables that are on that device. If one of those tables has hardware offload flag, nf_flow_table_iterate_cleanup flushes hardware and then runs the gc. But the gc can queue more hardware work, which will take time to execute. Instead first add the work, then flush it, to execute it now. Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support") Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31netfilter: Use kvcallocJoe Perches2-4/+3
Convert the uses of kvmalloc_array with __GFP_ZERO to the equivalent kvcalloc. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31mlxsw: spectrum_qdisc: Fix 64-bit division error in mlxsw_sp_qdisc_tbf_rate_kbpsNathan Chancellor1-1/+1
When building arm32 allmodconfig: ERROR: "__aeabi_uldivmod" [drivers/net/ethernet/mellanox/mlxsw/mlxsw_spectrum.ko] undefined! rate_bytes_ps has type u64, we need to use a 64-bit division helper to avoid a build error. Fixes: a44f58c41bfb ("mlxsw: spectrum_qdisc: Support offloading of TBF Qdisc") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31ionic: fix rxq comp packet type maskShannon Nelson1-1/+1
Be sure to include all the packet type bits in the mask. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31net: phy: at803x: disable vddio regulatorMichael Walle1-0/+11
The probe() might enable a VDDIO regulator, which needs to be disabled again before calling regulator_put(). Add a remove() function. Fixes: 2f664823a470 ("net: phy: at803x: add device tree binding") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31net: mii_timestamper: fix static allocation by PHY driverMichael Walle2-1/+14
If phydev->mii_ts is set by the PHY driver, it will always be overwritten in of_mdiobus_register_phy(). Fix it. Also make sure, that the unregister() doesn't do anything if the mii_timestamper was provided by the PHY driver. Fixes: 1dca22b18421 ("net: mdio: of: Register discovered MII time stampers.") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31net: mdio: of: fix potential NULL pointer derefernceMichael Walle1-3/+6
of_find_mii_timestamper() returns NULL if no timestamper is found. Therefore, guard the unregister_mii_timestamper() calls. Fixes: 1dca22b18421 ("net: mdio: of: Register discovered MII time stampers.") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-30rxrpc: Fix missing active use pinning of rxrpc_local objectDavid Howells5-40/+62
The introduction of a split between the reference count on rxrpc_local objects and the usage count didn't quite go far enough. A number of kernel work items need to make use of the socket to perform transmission. These also need to get an active count on the local object to prevent the socket from being closed. Fix this by getting the active count in those places. Also split out the raw active count get/put functions as these places tend to hold refs on the rxrpc_local object already, so getting and putting an extra object ref is just a waste of time. The problem can lead to symptoms like: BUG: kernel NULL pointer dereference, address: 0000000000000018 .. CPU: 2 PID: 818 Comm: kworker/u9:0 Not tainted 5.5.0-fscache+ #51 ... RIP: 0010:selinux_socket_sendmsg+0x5/0x13 ... Call Trace: security_socket_sendmsg+0x2c/0x3e sock_sendmsg+0x1a/0x46 rxrpc_send_keepalive+0x131/0x1ae rxrpc_peer_keepalive_worker+0x219/0x34b process_one_work+0x18e/0x271 worker_thread+0x1a3/0x247 kthread+0xe6/0xeb ret_from_fork+0x1f/0x30 Fixes: 730c5fd42c1e ("rxrpc: Fix local endpoint refcounting") Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-30rxrpc: Fix insufficient receive notification generationDavid Howells1-4/+2
In rxrpc_input_data(), rxrpc_notify_socket() is called if the base sequence number of the packet is immediately following the hard-ack point at the end of the function. However, this isn't sufficient, since the recvmsg side may have been advancing the window and then overrun the position in which we're adding - at which point rx_hard_ack >= seq0 and no notification is generated. Fix this by always generating a notification at the end of the input function. Without this, a long call may stall, possibly indefinitely. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-30rxrpc: Fix use-after-free in rxrpc_put_local()David Howells1-1/+4
Fix rxrpc_put_local() to not access local->debug_id after calling atomic_dec_return() as, unless that returned n==0, we no longer have the right to access the object. Fixes: 06d9532fa6b3 ("rxrpc: Fix read-after-free in rxrpc_queue_local()") Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-30net/core: Do not clear VF index for node/port GUIDs queryLeon Romanovsky1-2/+2
VF numbers were assigned to node_guid and port_guid, but cleared right before such query calls were issued. It caused to return node/port GUIDs of VF index 0 for all VFs. Fixes: 30aad41721e0 ("net/core: Add support for getting VF GUIDs") Reported-by: Adrian Chiris <adrianc@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-30y2038: sparc: remove use of struct timexArnd Bergmann2-16/+19
'struct timex' is one of the last users of 'struct timeval' and is only referenced in one place in the kernel any more, to convert the user space timex into the kernel-internal version on sparc64, with a different tv_usec member type. As a preparation for hiding the time_t definition and everything using that in the kernel, change the implementation once more to only convert the timeval member, and then enclose the struct definition in an #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-30sparc64: add support for folded p4d page tablesMike Rapoport7-32/+84
Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-30ide: make drive->dn read onlyDan Carpenter2-1/+5
The IDE core always sets ->dn correctly so changing it is never required. Setting it to a different value than assigned by IDE core is very likely to result in data corruption (due to wrong transfer timings being set on the controller etc.) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-30mptcp: Fix undefined mptcp_handle_ipv6_mapped for modular IPV6Geert Uytterhoeven3-12/+9
If CONFIG_MPTCP=y, CONFIG_MPTCP_IPV6=n, and CONFIG_IPV6=m: ERROR: "mptcp_handle_ipv6_mapped" [net/ipv6/ipv6.ko] undefined! This does not happen if CONFIG_MPTCP_IPV6=y, as CONFIG_MPTCP_IPV6 selects CONFIG_IPV6, and thus forces CONFIG_IPV6 builtin. As exporting a symbol for an empty function would be a bit wasteful, fix this by providing a dummy version of mptcp_handle_ipv6_mapped() for the CONFIG_MPTCP_IPV6=n case. Rename mptcp_handle_ipv6_mapped() to mptcpv6_handle_mapped(), to make it clear this is a pure-IPV6 function, just like mptcpv6_init(). Fixes: cec37a6e41aae7bf ("mptcp: Handle MP_CAPABLE options for outgoing connections") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-30net: drop_monitor: Use kstrdupJoe Perches1-6/+2
Convert the equivalent but rather odd uses of kmemdup with __GFP_ZERO to the more common kstrdup and avoid unnecessary zeroing of copied over memory. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-30udp: document udp_rcv_segment special case for looped packetsWillem de Bruijn1-0/+7
Commit 6cd021a58c18a ("udp: segment looped gso packets correctly") fixes an issue with rare udp gso multicast packets looped onto the receive path. The stable backport makes the narrowest change to target only these packets, when needed. As opposed to, say, expanding __udp_gso_segment, which is harder to reason to be free from unintended side-effects. But the resulting code is hardly self-describing. Document its purpose and rationale. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-30mptcp: MPTCP_HMAC_TEST should depend on MPTCPGeert Uytterhoeven1-2/+4
As the MPTCP HMAC test is integrated into the MPTCP code, it can be built only when MPTCP is enabled. Hence when MPTCP is disabled, asking the user if the test code should be enabled is futile. Wrap the whole block of MPTCP-specific config options inside a check for MPTCP. While at it, drop the "default n" for MPTCP_HMAC_TEST, as that is the default anyway. Fixes: 65492c5a6ab5df50 ("mptcp: move from sha1 (v0) to sha256 (v1)") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-30mptcp: Fix incorrect IPV6 dependency checkGeert Uytterhoeven1-1/+1
If CONFIG_MPTCP=y, CONFIG_MPTCP_IPV6=n, and CONFIG_IPV6=m: net/mptcp/protocol.o: In function `__mptcp_tcp_fallback': protocol.c:(.text+0x786): undefined reference to `inet6_stream_ops' Fix this by checking for CONFIG_MPTCP_IPV6 instead of CONFIG_IPV6, like is done in all other places in the mptcp code. Fixes: 8ab183deb26a3b79 ("mptcp: cope with later TCP fallback") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-29io_uring: add support for epoll_ctl(2)Jens Axboe2-0/+72
This adds IORING_OP_EPOLL_CTL, which can perform the same work as the epoll_ctl(2) system call. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29eventpoll: support non-blocking do_epoll_ctl() callsJens Axboe2-13/+42
Also make it available outside of epoll, along with the helper that decides if we need to copy the passed in epoll_event. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29eventpoll: abstract out epoll_ctl() handlerJens Axboe1-20/+25
No functional changes in this patch. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29io_uring: fix linked command file table usageJens Axboe3-14/+21
We're not consistent in how the file table is grabbed and assigned if we have a command linked that requires the use of it. Add ->file_table to the io_op_defs[] array, and use that to determine when to grab the table instead of having the handlers set it if they need to defer. This also means we can kill the IO_WQ_WORK_NEEDS_FILES flag. We always initialize work->files, so io-wq can just check for that. Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.