aboutsummaryrefslogtreecommitdiffstats
path: root/init (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-06-21r8169: don't activate ASPM in chip if OS can't control ASPMHeiner Kallweit1-2/+6
Certain chip version / board combinations have massive problems if ASPM is active. If BIOS enables ASPM and doesn't let OS control it, then we may have a problem with the current code. Therefore check the return code of pci_disable_link_state() and don't enable ASPM in the network chip if OS can't control ASPM. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21PCI: let pci_disable_link_state propagate errorsHeiner Kallweit2-12/+15
Drivers may rely on pci_disable_link_state() having disabled certain ASPM link states. If OS can't control ASPM then pci_disable_link_state() turns into a no-op w/o informing the caller. The driver therefore may falsely assume the respective ASPM link states are disabled. Let pci_disable_link_state() propagate errors to the caller, enabling the caller to react accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21tcp: refine memory limit test in tcp_fragment()Eric Dumazet1-1/+2
tcp_fragment() might be called for skbs in the write queue. Memory limits might have been exceeded because tcp_sendmsg() only checks limits at full skb (64KB) boundaries. Therefore, we need to make sure tcp_fragment() wont punish applications that might have setup very low SO_SNDBUF values. Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21x86/vdso: Prevent segfaults due to hoisted vclock readsAndy Lutomirski1-2/+13
GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock pages before the vclock mode checks. This creates a path through vclock_gettime() in which no vclock is enabled at all (due to disabled TSC on old CPUs, for example) but the pvclock or hvclock page nevertheless read. This will segfault on bare metal. This fixes commit 459e3a21535a ("gcc-9: properly declare the {pv,hv}clock_page storage") in the sense that, before that commit, GCC didn't seem to generate the offending code. There was nothing wrong with that commit per se, and -stable maintainers should backport this to all supported kernels regardless of whether the offending commit was present, since the same crash could just as easily be triggered by the phase of the moon. On GCC 9.1.1, this doesn't seem to affect the generated code at all, so I'm not too concerned about performance regressions from this fix. Cc: stable@vger.kernel.org Cc: x86@kernel.org Cc: Borislav Petkov <bp@alien8.de> Reported-by: Duncan Roe <duncan_roe@optusnet.com.au> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-21SUNRPC: Fix a credential refcount leakTrond Myklebust1-1/+0
All callers of __rpc_clone_client() pass in a value for args->cred, meaning that the credential gets assigned and referenced in the call to rpc_new_client(). Reported-by: Ido Schimmel <idosch@idosch.org> Fixes: 79caa5fad47c ("SUNRPC: Cache cred of process creating the rpc_client") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-21Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"Anna Schumaker2-6/+2
Jon Hunter reports: "I have been noticing intermittent failures with a system suspend test on some of our machines that have a NFS mounted root file-system. Bisecting this issue points to your commit 431235818bc3 ("SUNRPC: Declare RPC timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does appear to resolve the problem. The cause of the suspend failure appears to be a long delay observed sometimes when resuming from suspend, and this is causing our test to timeout." This reverts commit 431235818bc3a919ca7487500c67c3144feece80. Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-21net :sunrpc :clnt :Fix xps refcount imbalance on the error pathLin Yi1-0/+1
rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget to release it before return, may lead to a memory leak. Signed-off-by: Lin Yi <teroincn@163.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-21NFS4: Only set creation opendata if O_CREATBenjamin Coddington1-9/+11
We can end up in nfs4_opendata_alloc during task exit, in which case current->fs has already been cleaned up. This leads to a crash in current_umask(). Fix this by only setting creation opendata if we are actually doing an open with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since O_CREAT will never be set for the recovery path. Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-20ARM: 8867/1: vdso: pass --be8 to linker if necessaryJason A. Donenfeld1-2/+3
The commit fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO") removed the passing of CFLAGS, since ld doesn't take those directly. However, prior, big-endian ARM was relying on gcc to translate its -mbe8 option into ld's --be8 option. Lacking this, ld generated be32 code, making the VDSO generate SIGILL when called by userspace. This commit passes --be8 if CONFIG_CPU_ENDIAN_BE8 is enabled. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-06-20KVM: nVMX: reorganize initial steps of vmx_set_nested_statePaolo Bonzini2-23/+35
Commit 332d079735f5 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state", 2019-05-02) broke evmcs_test because the eVMCS setup must be performed even if there is no VMXON region defined, as long as the eVMCS bit is set in the assist page. While the simplest possible fix would be to add a check on kvm_state->flags & KVM_STATE_NESTED_EVMCS in the initial "if" that covers kvm_state->hdr.vmx.vmxon_pa == -1ull, that is quite ugly. Instead, this patch moves checks earlier in the function and conditionalizes them on kvm_state->hdr.vmx.vmxon_pa, so that vmx_set_nested_state always goes through vmx_leave_nested and nested_enable_evmcs. Fixes: 332d079735f5 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state") Cc: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-20habanalabs: use u64_to_user_ptr() for reading user pointersArnd Bergmann1-1/+1
We cannot cast a 64-bit integer to a pointer on 32-bit architectures without a warning: drivers/misc/habanalabs/habanalabs_ioctl.c: In function 'debug_coresight': drivers/misc/habanalabs/habanalabs_ioctl.c:143:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] input = memdup_user((const void __user *) args->input_ptr, Use the macro that was defined for this purpose. Fixes: 315bc055ed56 ("habanalabs: add new IOCTL for debug, tracing and profiling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-06-19page_pool: fix compile warning when CONFIG_PAGE_POOL is disabledJesper Dangaard Brouer1-4/+4
Kbuild test robot reported compile warning: warning: no return statement in function returning non-void in function page_pool_request_shutdown, when CONFIG_PAGE_POOL is disabled. The fix makes the code a little more verbose, with a descriptive variable. Fixes: 99c07c43c4ea ("xdp: tracking page_pool resources and safe removal") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19nfsd: replace Jeff by Chuck as nfsd co-maintainerJ. Bruce Fields1-1/+1
Jeff's picking up more responsibilities elsewhere, and Chuck's agreed to take over. For now, as before, nothing's changing day-to-day, but I want to have a co-maintainer if only for bus factor. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-19inet: clear num_timeout reqsk_alloc()Eric Dumazet3-8/+3
KMSAN caught uninit-value in tcp_create_openreq_child() [1] This is caused by a recent change, combined by the fact that TCP cleared num_timeout, num_retrans and sk fields only when a request socket was about to be queued. Under syncookie mode, a temporary request socket is used, and req->num_timeout could contain garbage. Lets clear these three fields sooner, there is really no point trying to defer this and risk other bugs. [1] BUG: KMSAN: uninit-value in tcp_create_openreq_child+0x157f/0x1cc0 net/ipv4/tcp_minisocks.c:526 CPU: 1 PID: 13357 Comm: syz-executor591 Not tainted 5.2.0-rc4+ #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x162/0x2d0 mm/kmsan/kmsan.c:611 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:304 tcp_create_openreq_child+0x157f/0x1cc0 net/ipv4/tcp_minisocks.c:526 tcp_v6_syn_recv_sock+0x761/0x2d80 net/ipv6/tcp_ipv6.c:1152 tcp_get_cookie_sock+0x16e/0x6b0 net/ipv4/syncookies.c:209 cookie_v6_check+0x27e0/0x29a0 net/ipv6/syncookies.c:252 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1039 [inline] tcp_v6_do_rcv+0xf1c/0x1ce0 net/ipv6/tcp_ipv6.c:1344 tcp_v6_rcv+0x60b7/0x6a30 net/ipv6/tcp_ipv6.c:1554 ip6_protocol_deliver_rcu+0x1433/0x22f0 net/ipv6/ip6_input.c:397 ip6_input_finish net/ipv6/ip6_input.c:438 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_input+0x2af/0x340 net/ipv6/ip6_input.c:447 dst_input include/net/dst.h:439 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core net/core/dev.c:4981 [inline] __netif_receive_skb net/core/dev.c:5095 [inline] process_backlog+0x721/0x1410 net/core/dev.c:5906 napi_poll net/core/dev.c:6329 [inline] net_rx_action+0x738/0x1940 net/core/dev.c:6395 __do_softirq+0x4ad/0x858 kernel/softirq.c:293 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1052 </IRQ> do_softirq kernel/softirq.c:338 [inline] __local_bh_enable_ip+0x199/0x1e0 kernel/softirq.c:190 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:682 [inline] ip6_finish_output2+0x213f/0x2670 net/ipv6/ip6_output.c:117 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:150 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0x5d3/0x720 net/ipv6/ip6_output.c:167 dst_output include/net/dst.h:433 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_xmit+0x1f53/0x2650 net/ipv6/ip6_output.c:271 inet6_csk_xmit+0x3df/0x4f0 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x4076/0x5b40 net/ipv4/tcp_output.c:1156 tcp_transmit_skb net/ipv4/tcp_output.c:1172 [inline] tcp_write_xmit+0x39a9/0xa730 net/ipv4/tcp_output.c:2397 __tcp_push_pending_frames+0x124/0x4e0 net/ipv4/tcp_output.c:2573 tcp_send_fin+0xd43/0x1540 net/ipv4/tcp_output.c:3118 tcp_close+0x16ba/0x1860 net/ipv4/tcp.c:2403 inet_release+0x1f7/0x270 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:470 __sock_release net/socket.c:601 [inline] sock_close+0x156/0x490 net/socket.c:1273 __fput+0x4c9/0xba0 fs/file_table.c:280 ____fput+0x37/0x40 fs/file_table.c:313 task_work_run+0x22e/0x2a0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop arch/x86/entry/common.c:168 [inline] prepare_exit_to_usermode+0x39d/0x4d0 arch/x86/entry/common.c:199 syscall_return_slowpath+0x90/0x5c0 arch/x86/entry/common.c:279 do_syscall_64+0xe2/0xf0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x401d50 Code: 01 f0 ff ff 0f 83 40 0d 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d dd 8d 2d 00 00 75 14 b8 03 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 14 0d 00 00 c3 48 83 ec 08 e8 7a 02 00 00 RSP: 002b:00007fff1cf58cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000401d50 RDX: 000000000000001c RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00000000004a9050 R08: 0000000020000040 R09: 000000000000001c R10: 0000000020004004 R11: 0000000000000246 R12: 0000000000402ef0 R13: 0000000000402f80 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:201 [inline] kmsan_internal_poison_shadow+0x53/0xa0 mm/kmsan/kmsan.c:160 kmsan_kmalloc+0xa4/0x130 mm/kmsan/kmsan_hooks.c:177 kmem_cache_alloc+0x534/0xb00 mm/slub.c:2781 reqsk_alloc include/net/request_sock.h:84 [inline] inet_reqsk_alloc+0xa8/0x600 net/ipv4/tcp_input.c:6384 cookie_v6_check+0xadb/0x29a0 net/ipv6/syncookies.c:173 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1039 [inline] tcp_v6_do_rcv+0xf1c/0x1ce0 net/ipv6/tcp_ipv6.c:1344 tcp_v6_rcv+0x60b7/0x6a30 net/ipv6/tcp_ipv6.c:1554 ip6_protocol_deliver_rcu+0x1433/0x22f0 net/ipv6/ip6_input.c:397 ip6_input_finish net/ipv6/ip6_input.c:438 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_input+0x2af/0x340 net/ipv6/ip6_input.c:447 dst_input include/net/dst.h:439 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core net/core/dev.c:4981 [inline] __netif_receive_skb net/core/dev.c:5095 [inline] process_backlog+0x721/0x1410 net/core/dev.c:5906 napi_poll net/core/dev.c:6329 [inline] net_rx_action+0x738/0x1940 net/core/dev.c:6395 __do_softirq+0x4ad/0x858 kernel/softirq.c:293 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1052 do_softirq kernel/softirq.c:338 [inline] __local_bh_enable_ip+0x199/0x1e0 kernel/softirq.c:190 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:682 [inline] ip6_finish_output2+0x213f/0x2670 net/ipv6/ip6_output.c:117 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:150 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0x5d3/0x720 net/ipv6/ip6_output.c:167 dst_output include/net/dst.h:433 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_xmit+0x1f53/0x2650 net/ipv6/ip6_output.c:271 inet6_csk_xmit+0x3df/0x4f0 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x4076/0x5b40 net/ipv4/tcp_output.c:1156 tcp_transmit_skb net/ipv4/tcp_output.c:1172 [inline] tcp_write_xmit+0x39a9/0xa730 net/ipv4/tcp_output.c:2397 __tcp_push_pending_frames+0x124/0x4e0 net/ipv4/tcp_output.c:2573 tcp_send_fin+0xd43/0x1540 net/ipv4/tcp_output.c:3118 tcp_close+0x16ba/0x1860 net/ipv4/tcp.c:2403 inet_release+0x1f7/0x270 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:470 __sock_release net/socket.c:601 [inline] sock_close+0x156/0x490 net/socket.c:1273 __fput+0x4c9/0xba0 fs/file_table.c:280 ____fput+0x37/0x40 fs/file_table.c:313 task_work_run+0x22e/0x2a0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop arch/x86/entry/common.c:168 [inline] prepare_exit_to_usermode+0x39d/0x4d0 arch/x86/entry/common.c:199 syscall_return_slowpath+0x90/0x5c0 arch/x86/entry/common.c:279 do_syscall_64+0xe2/0xf0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: 336c39a03151 ("tcp: undo init congestion window on false SYNACK timeout") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: stmmac: initialize the reset delay arrayMartin Blumenstingl1-1/+1
Commit ce4ab73ab0c27c ("net: stmmac: drop the reset delays from struct stmmac_mdio_bus_data") moved the reset delay array from struct stmmac_mdio_bus_data to a stack variable. The values from the array inside struct stmmac_mdio_bus_data were previously initialized to 0 because the struct was allocated using devm_kzalloc(). The array on the stack has to be initialized explicitly, else we might be reading garbage values. Initialize all reset delays to 0 to ensure that the values are 0 if the "snps,reset-delays-us" property is not defined. This fixes booting at least two boards (MIPS pistachio marduk and ARM sun8i H2+ Orange Pi Zero). These are hanging during boot when initializing the stmmac Ethernet controller (as found by Kernel CI). Both have in common that they don't define the "snps,reset-delays-us" property. Fixes: ce4ab73ab0c27c ("net: stmmac: drop the reset delays from struct stmmac_mdio_bus_data") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19selftests/net: make udpgso_bench skip unsupported testcasesWillem de Bruijn2-34/+59
Kselftest can be run against older kernels. Instead of failing hard when a feature is unsupported, return the KSFT_SKIP exit code. Specifically, do not fail hard on missing udp zerocopy. The udp gso bench test runs multiple test cases from a single script. Fail if any case fails, else return skip if any test is skipped. Link: https://lore.kernel.org/lkml/20190618171516.GA17547@kroah.com/ Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net/ipv4: fib_trie: Avoid cryptic ternary expressionsMatthias Kaehlcke1-2/+8
empty_child_inc/dec() use the ternary operator for conditional operations. The conditions involve the post/pre in/decrement operator and the operation is only performed when the condition is *not* true. This is hard to parse for humans, use a regular 'if' construct instead and perform the in/decrement separately. This also fixes two warnings that are emitted about the value of the ternary expression being unused, when building the kernel with clang + "kbuild: Remove unnecessary -Wno-unused-value" (https://lore.kernel.org/patchwork/patch/1089869/): CC net/ipv4/fib_trie.o net/ipv4/fib_trie.c:351:2: error: expression result unused [-Werror,-Wunused-value] ++tn_info(n)->empty_children ? : ++tn_info(n)->full_children; Fixes: 95f60ea3e99a ("fib_trie: Add collapse() and should_collapse() to resize") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: mvpp2: debugfs: Add pmap to fs dumpNathan Huckleberry1-0/+3
There was an unused variable 'mvpp2_dbgfs_prs_pmap_fops' Added a usage consistent with other fops to dump pmap to userspace. Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/529 Signed-off-by: Nathan Huckleberry <nhuck@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19ipv6: Default fib6_type to RTN_UNICAST when not setDavid Ahern1-1/+1
A user reported that routes are getting installed with type 0 (RTN_UNSPEC) where before the routes were RTN_UNICAST. One example is from accel-ppp which apparently still uses the ioctl interface and does not set rtmsg_type. Another is the netlink interface where ipv6 does not require rtm_type to be set (v4 does). Prior to the commit in the Fixes tag the ipv6 stack converted type 0 to RTN_UNICAST, so restore that behavior. Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: sched: act_ctinfo: tidy UAPI definitionKevin Darbyshire-Bryant2-5/+5
Remove some enums from the UAPI definition that were only used internally and are NOT part of the UAPI. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: hns3: Fix inconsistent indentingKrzysztof Kozlowski1-1/+1
Fix wrong indentation of goto return. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net/af_iucv: always register net_device notifierJulian Wiedmann1-7/+20
Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still open HiperTransport-based connections. For robust operation these connections require the af_iucv_netdev_notifier, so register it unconditionally. Also handle any error that register_netdevice_notifier() returns. Fixes: 9fbd87d41392 ("af_iucv: handle netdev events") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net/af_iucv: build proper skbs for HiperTransportJulian Wiedmann1-5/+11
The HiperSockets-based transport path in af_iucv is still too closely entangled with qeth. With commit a647a02512ca ("s390/qeth: speed-up L3 IQD xmit"), the relevant xmit code in qeth has begun to use skb_cow_head(). So to avoid unnecessary skb head expansions, af_iucv must learn to 1) respect dev->needed_headroom when allocating skbs, and 2) drop the header reference before cloning the skb. While at it, also stop hard-coding the LL-header creation stage and just use the appropriate helper. Fixes: a647a02512ca ("s390/qeth: speed-up L3 IQD xmit") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net/af_iucv: remove GFP_DMA restriction for HiperTransportJulian Wiedmann1-1/+5
af_iucv sockets over z/VM IUCV require that their skbs are allocated in DMA memory. This restriction doesn't apply to connections over HiperSockets. So only set this limit for z/VM IUCV sockets, thereby increasing the likelihood that the large (and linear!) allocations for HiperTransport messages succeed. Fixes: 3881ac441f64 ("af_iucv: add HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19doc: fix documentation about UIO_MEM_LOGICAL usingYang Yingliang1-2/+2
After commit d4fc5069a394 ("mm: switch s_mem and slab_cache in struct page") page->mapping will be re-used by slab allocations and page->mapping->host will be used in balance_dirty_pages_ratelimited() as an inode member but it's not an inode in fact and leads an oops. [ 159.906493] Unable to handle kernel paging request at virtual address ffff200012d90be8 [ 159.908029] Mem abort info: [ 159.908552] ESR = 0x96000007 [ 159.909138] Exception class = DABT (current EL), IL = 32 bits [ 159.910155] SET = 0, FnV = 0 [ 159.910690] EA = 0, S1PTW = 0 [ 159.911241] Data abort info: [ 159.911846] ISV = 0, ISS = 0x00000007 [ 159.912567] CM = 0, WnR = 0 [ 159.913105] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000042acd000 [ 159.914269] [ffff200012d90be8] pgd=000000043ffff003, pud=000000043fffe003, pmd=000000043fffa003, pte=0000000000000000 [ 159.916280] Internal error: Oops: 96000007 [#1] SMP [ 159.917195] Dumping ftrace buffer: [ 159.917845] (ftrace buffer empty) [ 159.918521] Modules linked in: uio_dev(OE) [ 159.919276] CPU: 1 PID: 295 Comm: uio_test Tainted: G OE 5.2.0-rc4+ #46 [ 159.920859] Hardware name: linux,dummy-virt (DT) [ 159.921815] pstate: 60000005 (nZCv daif -PAN -UAO) [ 159.922809] pc : balance_dirty_pages_ratelimited+0x68/0xc38 [ 159.923965] lr : fault_dirty_shared_page.isra.8+0xe4/0x100 [ 159.925134] sp : ffff800368a77ae0 [ 159.925824] x29: ffff800368a77ae0 x28: 1ffff0006d14ce1a [ 159.926906] x27: ffff800368a670d0 x26: ffff800368a67120 [ 159.927985] x25: 1ffff0006d10f5fe x24: ffff200012d90be8 [ 159.929089] x23: ffff200013732000 x22: ffff80036ec03200 [ 159.930172] x21: ffff200012d90bc0 x20: 1fffe400025b217d [ 159.931253] x19: ffff80036ec03200 x18: 0000000000000000 [ 159.932348] x17: 0000000000000000 x16: 0ffffe0000010208 [ 159.933439] x15: 0000000000000000 x14: 0000000000000000 [ 159.934518] x13: 0000000000000000 x12: 0000000000000000 [ 159.935596] x11: 1fffefc001b452c0 x10: ffff0fc001b452c0 [ 159.936697] x9 : dfff200000000000 x8 : dfff200000000001 [ 159.937781] x7 : ffff7e000da29607 x6 : ffff0fc001b452c1 [ 159.938859] x5 : ffff0fc001b452c1 x4 : ffff0fc001b452c1 [ 159.939944] x3 : ffff200010523ad4 x2 : 1fffe400026e659b [ 159.941065] x1 : dfff200000000000 x0 : ffff200013732cd8 [ 159.942205] Call trace: [ 159.942732] balance_dirty_pages_ratelimited+0x68/0xc38 [ 159.943797] fault_dirty_shared_page.isra.8+0xe4/0x100 [ 159.944867] do_fault+0x608/0x1250 [ 159.945571] __handle_mm_fault+0x93c/0xfb8 [ 159.946412] handle_mm_fault+0x1c0/0x360 [ 159.947224] do_page_fault+0x358/0x8d0 [ 159.947993] do_translation_fault+0xf8/0x124 [ 159.948884] do_mem_abort+0x70/0x190 [ 159.949624] el0_da+0x24/0x28 According another commit 5e901d0b15c0 ("scsi: qedi: Fix bad pte call trace when iscsiuio is stopped."), using kmalloc also cause other problem. But the documentation about UIO_MEM_LOGICAL allows using kmalloc(), remove and don't allow using kmalloc() in documentation. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin SchenkGavin Schenk2-12/+12
Due to new challenges in my life I can no longer take care of SIOX. Thorsten takes over my SIOX tasks. Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de> Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19docs: fb: Add TER16x32 to the available font namesTakashi Iwai1-1/+1
The new font is available since recently. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19MAINTAINERS: fpga: hand off maintainership to MoritzAlan Tull1-1/+0
I'm moving on to a new position and stepping down as FPGA subsystem maintainer. Moritz has graciously agreed to take over the maintainership. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19inet: fix various use-after-free in defrags unitsEric Dumazet7-24/+52
syzbot reported another issue caused by my recent patches. [1] The issue here is that fqdir_exit() is initiating a work queue and immediately returns. A bit later cleanup_net() was able to free the MIB (percpu data) and the whole struct net was freed, but we had active frag timers that fired and triggered use-after-free. We need to make sure that timers can catch fqdir->dead being set, to bailout. Since RCU is used for the reader side, this means we want to respect an RCU grace period between these operations : 1) qfdir->dead = 1; 2) netns dismantle (freeing of various data structure) This patch uses new new (struct pernet_operations)->pre_exit infrastructure to ensures a full RCU grace period happens between fqdir_pre_exit() and fqdir_exit() This also means we can use a regular work queue, we no longer need rcu_work. Tested: $ time for i in {1..1000}; do unshare -n /bin/false;done real 0m2.585s user 0m0.160s sys 0m2.214s [1] BUG: KASAN: use-after-free in ip_expire+0x73e/0x800 net/ipv4/ip_fragment.c:152 Read of size 8 at addr ffff88808b9fe330 by task syz-executor.4/11860 CPU: 1 PID: 11860 Comm: syz-executor.4 Not tainted 5.2.0-rc2+ #22 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 ip_expire+0x73e/0x800 net/ipv4/ip_fragment.c:152 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322 expire_timers kernel/time/timer.c:1366 [inline] __run_timers kernel/time/timer.c:1685 [inline] __run_timers kernel/time/timer.c:1653 [inline] run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698 __do_softirq+0x25c/0x94c kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806 </IRQ> RIP: 0010:tomoyo_domain_quota_is_ok+0x131/0x540 security/tomoyo/util.c:1035 Code: 24 4c 3b 65 d0 0f 84 9c 00 00 00 e8 19 1d 73 fe 49 8d 7c 24 18 48 ba 00 00 00 00 00 fc ff df 48 89 f8 48 c1 e8 03 0f b6 04 10 <48> 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 69 03 00 00 41 0f b6 5c RSP: 0018:ffff88806ae079c0 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000000 RBX: 0000000000000010 RCX: ffffc9000e655000 RDX: dffffc0000000000 RSI: ffffffff82fd88a7 RDI: ffff888086202398 RBP: ffff88806ae07a00 R08: ffff88808b6c8700 R09: ffffed100d5c0f4d R10: ffffed100d5c0f4c R11: 0000000000000000 R12: ffff888086202380 R13: 0000000000000030 R14: 00000000000000d3 R15: 0000000000000000 tomoyo_supervisor+0x2e8/0xef0 security/tomoyo/common.c:2087 tomoyo_audit_path_number_log security/tomoyo/file.c:235 [inline] tomoyo_path_number_perm+0x42f/0x520 security/tomoyo/file.c:734 tomoyo_file_ioctl+0x23/0x30 security/tomoyo/tomoyo.c:335 security_file_ioctl+0x77/0xc0 security/security.c:1370 ksys_ioctl+0x57/0xd0 fs/ioctl.c:711 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4592c9 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8db5e44c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004592c9 RDX: 0000000020000080 RSI: 00000000000089f1 RDI: 0000000000000006 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f8db5e456d4 R13: 00000000004cc770 R14: 00000000004d5cd8 R15: 00000000ffffffff Allocated by task 9047: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_kmalloc mm/kasan/common.c:489 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:497 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3326 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3488 kmem_cache_zalloc include/linux/slab.h:732 [inline] net_alloc net/core/net_namespace.c:386 [inline] copy_net_ns+0xed/0x340 net/core/net_namespace.c:426 create_new_namespaces+0x400/0x7b0 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:206 ksys_unshare+0x440/0x980 kernel/fork.c:2692 __do_sys_unshare kernel/fork.c:2760 [inline] __se_sys_unshare kernel/fork.c:2758 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:2758 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2541: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459 __cache_free mm/slab.c:3432 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3698 net_free net/core/net_namespace.c:402 [inline] net_drop_ns.part.0+0x70/0x90 net/core/net_namespace.c:409 net_drop_ns net/core/net_namespace.c:408 [inline] cleanup_net+0x538/0x960 net/core/net_namespace.c:571 process_one_work+0x989/0x1790 kernel/workqueue.c:2269 worker_thread+0x98/0xe40 kernel/workqueue.c:2415 kthread+0x354/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff88808b9fe100 which belongs to the cache net_namespace of size 6784 The buggy address is located 560 bytes inside of 6784-byte region [ffff88808b9fe100, ffff88808b9ffb80) The buggy address belongs to the page: page:ffffea00022e7f80 refcount:1 mapcount:0 mapping:ffff88821b6f60c0 index:0x0 compound_mapcount: 0 flags: 0x1fffc0000010200(slab|head) raw: 01fffc0000010200 ffffea000256f288 ffffea0001bbef08 ffff88821b6f60c0 raw: 0000000000000000 ffff88808b9fe100 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808b9fe200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88808b9fe280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88808b9fe300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88808b9fe380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88808b9fe400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 3c8fc8782044 ("inet: frags: rework rhashtable dismantle") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19netns: add pre_exit method to struct pernet_operationsEric Dumazet2-0/+33
Current struct pernet_operations exit() handlers are highly discouraged to call synchronize_rcu(). There are cases where we need them, and exit_batch() does not help the common case where a single netns is dismantled. This patch leverages the existing synchronize_rcu() call in cleanup_net() Calling optional ->pre_exit() method before ->exit() or ->exit_batch() allows to benefit from a single synchronize_rcu() call. Note that the synchronize_rcu() calls added in this patch are only in error paths or slow paths. Tested: $ time for i in {1..1000}; do unshare -n /bin/false;done real 0m2.612s user 0m0.171s sys 0m2.216s Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19page_pool: make sure struct device is stableJesper Dangaard Brouer1-0/+8
For DMA mapping use-case the page_pool keeps a pointer to the struct device, which is used in DMA map/unmap calls. For our in-flight handling, we also need to make sure that the struct device have not disappeared. This is assured via using get_device/put_device API. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reported-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19page_pool: add tracepoints for page_pool with details need by XDPJesper Dangaard Brouer3-1/+99
The xdp tracepoints for mem id disconnect don't carry information about, why it was not safe_to_remove. The tracepoint page_pool:page_pool_inflight in this patch can be used for extract this info for further debugging. This patchset also adds tracepoint for the pages_state_* release/hold transitions, including a pointer to the page. This can be used for stats about in-flight pages, or used to debug page leakage via keeping track of page pointer and combining this with kprobe for __put_page(). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19xdp: add tracepoints for XDP memJesper Dangaard Brouer3-16/+143
These tracepoints make it easier to troubleshoot XDP mem id disconnect. The xdp:mem_disconnect tracepoint cannot be replaced via kprobe. It is placed at the last stable place for the pointer to struct xdp_mem_allocator, just before it's scheduled for RCU removal. It also extract info on 'safe_to_remove' and 'force'. Detailed info about in-flight pages is not available at this layer. The next patch will added tracepoints needed at the page_pool layer for this. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19xdp: force mem allocator removal and periodic warningJesper Dangaard Brouer2-7/+48
If bugs exists or are introduced later e.g. by drivers misusing the API, then we want to warn about the issue, such that developer notice. This patch will generate a bit of noise in form of periodic pr_warn every 30 seconds. It is not nice to have this stall warning running forever. Thus, this patch will (after 120 attempts) force disconnect the mem id (from the rhashtable) and free the page_pool object. This will cause fallback to the put_page() as before, which only potentially leak DMA-mappings, if objects are really stuck for this long. In that unlikely case, a WARN_ONCE should show us the call stack. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19xdp: tracking page_pool resources and safe removalJesper Dangaard Brouer4-35/+136
This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19mlx5: more strict use of page_pool APIJesper Dangaard Brouer2-5/+7
The mlx5 driver is using page_pool, but not for DMA-mapping (currently), and is a little too relaxed about returning or releasing page resources, as it is not strictly necessary, when not using DMA-mappings. As this patchset is working towards tracking page_pool resources, to know about in-flight frames on shutdown. Then fix places where mlx5 leak page_pool resource. In case of dma_mapping_error, then recycle into page_pool. In mlx5e_free_rq() moved the page_pool_destroy() call to after the mlx5e_page_release() calls, as it is more correct. In mlx5e_page_release() when no recycle was requested, then release page from the page_pool, via page_pool_release_page(). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19page_pool: introduce page_pool_free and use in mlx5Jesper Dangaard Brouer3-7/+25
In case driver fails to register the page_pool with XDP return API (via xdp_rxq_info_reg_mem_model()), then the driver can free the page_pool resources more directly than calling page_pool_destroy(), which does a unnecessarily RCU free procedure. This patch is preparing for removing page_pool_destroy(), from driver invocation. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19veth: use xdp_release_frame for XDP_PASSJesper Dangaard Brouer1-0/+1
Like cpumap use xdp_release_frame() when an xdp_frame got converted into an SKB and send towars the network stack. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19xdp: page_pool related fix to cpumapJesper Dangaard Brouer4-1/+47
When converting an xdp_frame into an SKB, and sending this into the network stack, then the underlying XDP memory model need to release associated resources, because the network stack don't have callbacks for XDP memory models. The only memory model that needs this is page_pool, when a driver use the DMA-mapping feature. Introduce page_pool_release_page(), which basically does the same as page_pool_unmap_page(). Add xdp_release_frame() as the XDP memory model interface for calling it, if the memory model match MEM_TYPE_PAGE_POOL, to save the function call overhead for others. Have cpumap call xdp_release_frame() before xdp_scrub_frame(). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19xdp: fix leak of IDA cyclic id if rhashtable_insert_slow failsJesper Dangaard Brouer1-0/+2
Fix error handling case, where inserting ID with rhashtable_insert_slow fails in xdp_rxq_info_reg_mem_model, which leads to never releasing the IDA ID, as the lookup in xdp_rxq_info_unreg_mem_model fails and thus ida_simple_remove() is never called. Fix by releasing ID via ida_simple_remove(), and mark xdp_rxq->mem.id with zero, which is already checked in xdp_rxq_info_unreg_mem_model(). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: page_pool: add helper function to unmap dma addressesIlias Apalodimas2-0/+8
On a previous patch dma addr was stored in 'struct page'. Use that to unmap DMA addresses used by network drivers Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: page_pool: add helper function to retrieve dma addressesIlias Apalodimas1-0/+5
On a previous patch dma addr was stored in 'struct page'. Use that to retrieve DMA addresses used by network drivers Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507Thomas Gleixner8-120/+8
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa the full gnu general public license is included in this distribution in the file called license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 8 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.801261482@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506Thomas Gleixner4-12/+4
Based on 1 normalized pattern(s): this software program is licensed subject to the gnu general public license gpl version 2 june 1991 available at http www fsf org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Daniel German <dmg@turingmachine.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.687420463@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505Thomas Gleixner56-118/+163
Based on 1 normalized pattern(s): gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 58 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.556988620@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504Thomas Gleixner8-105/+8
Based on 1 normalized pattern(s): this file is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 8 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.443595178@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.308909165@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.195075312@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501Thomas Gleixner9-45/+9
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation see readme and copying for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.060259192@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner4119-17022/+4119
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>