aboutsummaryrefslogtreecommitdiffstats
path: root/init (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-02declance: Fix continuation with the adapter identification messageMaciej W. Rozycki1-4/+6
Fix a commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") regression with the `declance' driver, which caused the adapter identification message to be split between two lines, e.g.: declance.c: v0.011 by Linux MIPS DECstation task force tc6: PMAD-AA , addr = 08:00:2b:1b:2a:6a, irq = 14 tc6: registered as eth0. Address that properly, by printing identification with a single call, making the messages now look like: declance.c: v0.011 by Linux MIPS DECstation task force tc6: PMAD-AA, addr = 08:00:2b:1b:2a:6a, irq = 14 tc6: registered as eth0. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02net: fec: fix rare tx timeoutRickard x Andersson1-4/+4
During certain heavy network loads TX could time out with TX ring dump. TX is sometimes never restarted after reaching "tx_stop_threshold" because function "fec_enet_tx_queue" only tests the first queue. In addition the TX timeout callback function failed to recover because it also operated only on the first queue. Signed-off-by: Rickard x Andersson <rickaran@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01r8169: fix network stalls due to missing bit TXCFG_AUTO_FIFOHeiner Kallweit1-12/+8
Some of the chip-specific hw_start functions set bit TXCFG_AUTO_FIFO in register TxConfig. The original patch changed the order of some calls resulting in these changes being overwritten by rtl_set_tx_config_registers() in rtl_hw_start(). This eventually resulted in network stalls especially under high load. Analyzing the chip-specific hw_start functions all chip version from 34, with the exception of version 39, need this bit set. This patch moves setting this bit to rtl_set_tx_config_registers(). Fixes: 4fd48c4ac0a0 ("r8169: move common initializations to tp->hw_start") Reported-by: Ortwin Glück <odi@odi.ch> Reported-by: David Arendt <admin@prnet.org> Root-caused-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Tested-by: Tony Atkinson <tatkinson@linux.com> Tested-by: David Arendt <admin@prnet.org> Tested-by: Ortwin Glück <odi@odi.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tun: napi flags belong to tfileEric Dumazet1-9/+14
Since tun->flags might be shared by multiple tfile structures, it is better to make sure tun_get_user() is using the flags for the current tfile. Presence of the READ_ONCE() in tun_napi_frags_enabled() gave a hint of what could happen, but we need something stronger to please syzbot. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13647 Comm: syz-executor5 Not tainted 4.19.0-rc5+ #59 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427 Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4 RSP: 0018:ffff8801c400f410 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325 RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0 RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000 R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358 R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004 FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: napi_gro_frags+0x3f4/0xc90 net/core/dev.c:5715 tun_get_user+0x31d5/0x42a0 drivers/net/tun.c:1922 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1967 call_write_iter include/linux/fs.h:1808 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6b8/0x9f0 fs/read_write.c:487 vfs_write+0x1fc/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457579 Code: 1d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe003614c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457579 RDX: 0000000000000012 RSI: 0000000020000000 RDI: 000000000000000a RBP: 000000000072c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0036156d4 R13: 00000000004c5574 R14: 00000000004d8e98 R15: 00000000ffffffff Modules linked in: RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427 Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4 RSP: 0018:ffff8801c400f410 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325 RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0 RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000 R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358 R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004 FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tun: initialize napi_mutex unconditionallyEric Dumazet1-1/+1
This is the first part to fix following syzbot report : console output: https://syzkaller.appspot.com/x/log.txt?x=145378e6400000 kernel config: https://syzkaller.appspot.com/x/.config?x=443816db871edd66 dashboard link: https://syzkaller.appspot.com/bug?extid=e662df0ac1d753b57e80 Following patch is fixing the race condition, but it seems safer to initialize this mutex at tfile creation anyway. Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+e662df0ac1d753b57e80@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tun: remove unused parametersEric Dumazet1-6/+6
tun_napi_disable() and tun_napi_del() do not need a pointer to the tun_struct Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01bond: take rcu lock in netpoll_send_skb_on_devDave Jones1-0/+2
The bonding driver lacks the rcu lock when it calls down into netdev_lower_get_next_private_rcu from bond_poll_controller, which results in a trace like: WARNING: CPU: 2 PID: 179 at net/core/dev.c:6567 netdev_lower_get_next_private_rcu+0x34/0x40 CPU: 2 PID: 179 Comm: kworker/u16:15 Not tainted 4.19.0-rc5-backup+ #1 Workqueue: bond0 bond_mii_monitor RIP: 0010:netdev_lower_get_next_private_rcu+0x34/0x40 Code: 48 89 fb e8 fe 29 63 ff 85 c0 74 1e 48 8b 45 00 48 81 c3 c0 00 00 00 48 8b 00 48 39 d8 74 0f 48 89 45 00 48 8b 40 f8 5b 5d c3 <0f> 0b eb de 31 c0 eb f5 0f 1f 40 00 0f 1f 44 00 00 48 8> RSP: 0018:ffffc9000087fa68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff880429614560 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 00000000ffffffff RDI: ffffffffa184ada0 RBP: ffffc9000087fa80 R08: 0000000000000001 R09: 0000000000000000 R10: ffffc9000087f9f0 R11: ffff880429798040 R12: ffff8804289d5980 R13: ffffffffa1511f60 R14: 00000000000000c8 R15: 00000000ffffffff FS: 0000000000000000(0000) GS:ffff88042f880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4b78fce180 CR3: 000000018180f006 CR4: 00000000001606e0 Call Trace: bond_poll_controller+0x52/0x170 netpoll_poll_dev+0x79/0x290 netpoll_send_skb_on_dev+0x158/0x2c0 netpoll_send_udp+0x2d5/0x430 write_ext_msg+0x1e0/0x210 console_unlock+0x3c4/0x630 vprintk_emit+0xfa/0x2f0 printk+0x52/0x6e ? __netdev_printk+0x12b/0x220 netdev_info+0x64/0x80 ? bond_3ad_set_carrier+0xe9/0x180 bond_select_active_slave+0x1fc/0x310 bond_mii_monitor+0x709/0x9b0 process_one_work+0x221/0x5e0 worker_thread+0x4f/0x3b0 kthread+0x100/0x140 ? process_one_work+0x5e0/0x5e0 ? kthread_delayed_work_timer_fn+0x90/0x90 ret_from_fork+0x24/0x30 We're also doing rcu dereferences a layer up in netpoll_send_skb_on_dev before we call down into netpoll_poll_dev, so just take the lock there. Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01rtnetlink: Fail dump if target netnsid is invalidDavid Ahern1-4/+2
Link dumps can return results from a target namespace. If the namespace id is invalid, then the dump request should fail if get_target_net fails rather than continuing with a dump of the current namespace. Fixes: 79e1ad148c844 ("rtnetlink: use netnsid to query interface") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Revert "openvswitch: Fix template leak in error cases."Flavio Leitner1-4/+2
This reverts commit 90c7afc96cbbd77f44094b5b651261968e97de67. When the commit was merged, the code used nf_ct_put() to free the entry, but later on commit 76644232e612 ("openvswitch: Free tmpl with tmpl_free.") replaced that with nf_ct_tmpl_free which is a more appropriate. Now the original problem is removed. Then 44d6e2f27328 ("net: Replace NF_CT_ASSERT() with WARN_ON().") replaced a debug assert with a WARN_ON() which is trigged now. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tipc: ignore STATE_MSG on wrong link sessionLUU Duc Canh2-2/+6
The initial session number when a link is created is based on a random value, taken from struct tipc_net->random. It is then incremented for each link reset to avoid mixing protocol messages from different link sessions. However, when a bearer is reset all its links are deleted, and will later be re-created using the same random value as the first time. This means that if the link never went down between creation and deletion we will still sometimes have two subsequent sessions with the same session number. In virtual environments with potentially long transmission times this has turned out to be a real problem. We now fix this by randomizing the session number each time a link is created. With a session number size of 16 bits this gives a risk of session collision of 1/64k. To reduce this further, we also introduce a sanity check on the very first STATE message arriving at a link. If this has an acknowledge value differing from 0, which is logically impossible, we ignore the message. The final risk for session collision is hence reduced to 1/4G, which should be sufficient. Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: sched: act_ipt: check for underflow in __tcf_ipt_init()Dan Carpenter1-1/+1
If "td->u.target_size" is larger than sizeof(struct xt_entry_target) we return -EINVAL. But we don't check whether it's smaller than sizeof(struct xt_entry_target) and that could lead to an out of bounds read. Fixes: 7ba699c604ab ("[NET_SCHED]: Convert actions from rtnetlink to new netlink API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tcp/dccp: fix lockdep issue when SYN is backloggedEric Dumazet3-4/+7
In normal SYN processing, packets are handled without listener lock and in RCU protected ingress path. But syzkaller is known to be able to trick us and SYN packets might be processed in process context, after being queued into socket backlog. In commit 06f877d613be ("tcp/dccp: fix other lockdep splats accessing ireq_opt") I made a very stupid fix, that happened to work mostly because of the regular path being RCU protected. Really the thing protecting ireq->ireq_opt is RCU read lock, and the pseudo request refcnt is not relevant. This patch extends what I did in commit 449809a66c1d ("tcp/dccp: block BH for SYN processing") by adding an extra rcu_read_{lock|unlock} pair in the paths that might be taken when processing SYN from socket backlog (thus possibly in process context) Fixes: 06f877d613be ("tcp/dccp: fix other lockdep splats accessing ireq_opt") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29netlink: fix typo in nla_parse_nested() commentJohannes Berg1-1/+1
Fix a simple typo: attribuets -> attributes Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29r8169: Disable clk during suspend / resumeHans de Goede1-0/+5
Disable the clk during suspend to save power. Note that tp->clk may be NULL, the clk core functions handle this without problems. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29qlcnic: fix Tx descriptor corruption on 82xx devicesShahed Shaikh5-12/+17
In regular NIC transmission flow, driver always configures MAC using Tx queue zero descriptor as a part of MAC learning flow. But with multi Tx queue supported NIC, regular transmission can occur on any non-zero Tx queue and from that context it uses Tx queue zero descriptor to configure MAC, at the same time TX queue zero could be used by another CPU for regular transmission which could lead to Tx queue zero descriptor corruption and cause FW abort. This patch fixes this in such a way that driver always configures learned MAC address from the same Tx queue which is used for regular transmission. Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29tipc: fix failover problemLUU Duc Canh3-0/+49
We see the following scenario: 1) Link endpoint B on node 1 discovers that its peer endpoint is gone. Since there is a second working link, failover procedure is started. 2) Link endpoint A on node 1 sends a FAILOVER message to peer endpoint A on node 2. The node item 1->2 goes to state FAILINGOVER. 3) Linke endpoint A/2 receives the failover, and is supposed to take down its parallell link endpoint B/2, while producing a FAILOVER message to send back to A/1. 4) However, B/2 has already been deleted, so no FAILOVER message can created. 5) Node 1->2 remains in state FAILINGOVER forever, refusing to receive any messages that can bring B/1 up again. We are left with a non- redundant link between node 1 and 2. We fix this with letting endpoint A/2 build a dummy FAILOVER message to send to back to A/1, so that the situation can be resolved. Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29smsc95xx: Check for Wake-on-LAN modesFlorian Fainelli1-0/+3
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29smsc75xx: Check for Wake-on-LAN modesFlorian Fainelli1-0/+3
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 6c636503260d ("smsc75xx: add wol magic packet support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29r8152: Check for supported Wake-on-LAN ModesFlorian Fainelli1-0/+3
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 21ff2e8976b1 ("r8152: support WOL") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29sr9800: Check for supported Wake-on-LAN modesFlorian Fainelli1-0/+3
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29lan78xx: Check for supported Wake-on-LAN modesFlorian Fainelli1-13/+4
The driver supports a fair amount of Wake-on-LAN modes, but is not checking that the user specified one that is supported. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Woojung Huh <Woojung.Huh@Microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29ax88179_178a: Check for supported Wake-on-LAN modesFlorian Fainelli1-0/+3
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29asix: Check for supported Wake-on-LAN modesFlorian Fainelli1-0/+3
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28ibmvnic: remove ndo_poll_controllerEric Dumazet1-16/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ibmvnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. ibmvnic_netpoll_controller() was completely wrong anyway, as it was scheduling NAPI to service RX queues (instead of TX), so I doubt netpoll ever worked on this driver. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28sfc-falcon: remove ndo_poll_controllerEric Dumazet1-26/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. sfc-falcon uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Acked-By: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28sfc: remove ndo_poll_controllerEric Dumazet1-26/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. sfc uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Acked-By: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28net: ena: remove ndo_poll_controllerEric Dumazet1-22/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ena uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Netanel Belgazal <netanel@amazon.com> Cc: Saeed Bishara <saeedb@amazon.com> Cc: Zorik Machulsky <zorik@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28qlogic: netxen: remove ndo_poll_controllerEric Dumazet1-23/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. netxen uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Rahul Verma <rahul.verma@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28qlcnic: remove ndo_poll_controllerEric Dumazet1-45/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. qlcnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Harish Patil <harish.patil@cavium.com> Cc: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28virtio_net: remove ndo_poll_controllerEric Dumazet1-14/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. virto_net uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28net: hns: remove ndo_poll_controllerEric Dumazet1-18/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. hns uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28ehea: remove ndo_poll_controllerEric Dumazet1-14/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ehea uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28hinic: remove ndo_poll_controllerEric Dumazet1-20/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. hinic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Note that hinic_netpoll() was incorrectly scheduling NAPI on both RX and TX queues. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28netpoll: do not test NAPI_STATE_SCHED in poll_one_napi()Eric Dumazet1-19/+1
Since we do no longer require NAPI drivers to provide an ndo_poll_controller(), napi_schedule() has not been done before poll_one_napi() invocation. So testing NAPI_STATE_SCHED is likely to cause early returns. While we are at it, remove outdated comment. Note to future bisections : This change might surface prior bugs in drivers. See commit 73f21c653f93 ("bnxt_en: Fix TX timeout during netpoll.") for one occurrence. Fixes: ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Song Liu <songliubraving@fb.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28qed: Fix shmem structure inconsistency between driver and the mfw.Sudarsana Reddy Kalluru1-0/+1
The structure shared between driver and the management FW (mfw) differ in sizes. This would lead to issues when driver try to access the structure members which are not-aligned with the mfw copy e.g., data_ptr usage in the case of mfw_tlv request. Align the driver structure with mfw copy, add reserved field(s) to driver structure for the members not used by the driver. Fixes: dd006921d67f ("qed: Add MFW interfaces for TLV request support.) Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
2018-09-28Update maintainers for bnx2/bnx2x/qlge/qlcnic drivers.Sudarsana Reddy Kalluru1-3/+2
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ameen Rahman <Ameen.Rahman@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28MAINTAINERS: change bridge maintainersStephen Hemminger1-1/+2
I haven't been doing reviews only but not active development on bridge code for several years. Roopa and Nikolay have been doing most of the new features and have agreed to take over as new co-maintainers. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
2018-09-28s390: qeth: Fix potential array overrun in cmd/rc lookupJean Delvare3-17/+19
Functions qeth_get_ipa_msg and qeth_get_ipa_cmd_name are modifying the last member of global arrays without any locking that I can see. If two instances of either function are running at the same time, it could cause a race ultimately leading to an array overrun (the contents of the last entry of the array is the only guarantee that the loop will ever stop). Performing the lookups without modifying the arrays is admittedly slower (two comparisons per iteration instead of one) but these are operations which are rare (should only be needed in error cases or when debugging, not during successful operation) and it seems still less costly than introducing a mutex to protect the arrays in question. As a side bonus, it allows us to declare both arrays as const data. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: Ursula Braun <ubraun@linux.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28s390: qeth_core_mpc: Use ARRAY_SIZE instead of reimplementing its functionzhong jiang1-5/+2
Use the common code ARRAY_SIZE macro instead of a private implementation. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28netfilter: xt_socket: check sk before checking for netns.Flavio Leitner1-2/+2
Only check for the network namespace if the socket is available. Fixes: f564650106a6 ("netfilter: check if the socket netns is correct.") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-28netfilter: avoid erronous array bounds warningFlorian Westphal1-0/+2
Unfortunately some versions of gcc emit following warning: $ make net/xfrm/xfrm_output.o linux/compiler.h:252:20: warning: array subscript is above array bounds [-Warray-bounds] hook_head = rcu_dereference(net->nf.hooks_arp[hook]); ^~~~~~~~~~~~~~~~~~~~~ xfrm_output_resume passes skb_dst(skb)->ops->family as its 'pf' arg so compiler can't know that we'll never access hooks_arp[]. (NFPROTO_IPV4 or NFPROTO_IPV6 are only possible cases). Avoid this by adding an explicit WARN_ON_ONCE() check. This patch has no effect if the family is a compile-time constant as gcc will remove the switch() construct entirely. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-28netfilter: nft_set_rbtree: add missing rb_erase() in GC routineTaehee Yoo1-14/+14
The nft_set_gc_batch_check() checks whether gc buffer is full. If gc buffer is full, gc buffer is released by the nft_set_gc_batch_complete() internally. In case of rbtree, the rb_erase() should be called before calling the nft_set_gc_batch_complete(). therefore the rb_erase() should be called before calling the nft_set_gc_batch_check() too. test commands: table ip filter { set set1 { type ipv4_addr; flags interval, timeout; gc-interval 10s; timeout 1s; elements = { 1-2, 3-4, 5-6, ... 10000-10001, } } } %nft -f test.nft splat looks like: [ 430.273885] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 430.282158] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 430.283116] CPU: 1 PID: 190 Comm: kworker/1:2 Tainted: G B 4.18.0+ #7 [ 430.283116] Workqueue: events_power_efficient nft_rbtree_gc [nf_tables_set] [ 430.313559] RIP: 0010:rb_next+0x81/0x130 [ 430.313559] Code: 08 49 bd 00 00 00 00 00 fc ff df 48 bb 00 00 00 00 00 fc ff df 48 85 c0 75 05 eb 58 48 89 d4 [ 430.313559] RSP: 0018:ffff88010cdb7680 EFLAGS: 00010207 [ 430.313559] RAX: 0000000000b84854 RBX: dffffc0000000000 RCX: ffffffff83f01973 [ 430.313559] RDX: 000000000017090c RSI: 0000000000000008 RDI: 0000000000b84864 [ 430.313559] RBP: ffff8801060d4588 R08: fffffbfff09bc349 R09: fffffbfff09bc349 [ 430.313559] R10: 0000000000000001 R11: fffffbfff09bc348 R12: ffff880100f081a8 [ 430.313559] R13: dffffc0000000000 R14: ffff880100ff8688 R15: dffffc0000000000 [ 430.313559] FS: 0000000000000000(0000) GS:ffff88011b400000(0000) knlGS:0000000000000000 [ 430.313559] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 430.313559] CR2: 0000000001551008 CR3: 000000005dc16000 CR4: 00000000001006e0 [ 430.313559] Call Trace: [ 430.313559] nft_rbtree_gc+0x112/0x5c0 [nf_tables_set] [ 430.313559] process_one_work+0xc13/0x1ec0 [ 430.313559] ? _raw_spin_unlock_irq+0x29/0x40 [ 430.313559] ? pwq_dec_nr_in_flight+0x3c0/0x3c0 [ 430.313559] ? set_load_weight+0x270/0x270 [ 430.313559] ? __switch_to_asm+0x34/0x70 [ 430.313559] ? __switch_to_asm+0x40/0x70 [ 430.313559] ? __switch_to_asm+0x34/0x70 [ 430.313559] ? __switch_to_asm+0x34/0x70 [ 430.313559] ? __switch_to_asm+0x40/0x70 [ 430.313559] ? __switch_to_asm+0x34/0x70 [ 430.313559] ? __switch_to_asm+0x40/0x70 [ 430.313559] ? __switch_to_asm+0x34/0x70 [ 430.313559] ? __switch_to_asm+0x34/0x70 [ 430.313559] ? __switch_to_asm+0x40/0x70 [ 430.313559] ? __switch_to_asm+0x34/0x70 [ 430.313559] ? __schedule+0x6d3/0x1f50 [ 430.313559] ? find_held_lock+0x39/0x1c0 [ 430.313559] ? __sched_text_start+0x8/0x8 [ 430.313559] ? cyc2ns_read_end+0x10/0x10 [ 430.313559] ? save_trace+0x300/0x300 [ 430.313559] ? sched_clock_local+0xd4/0x140 [ 430.313559] ? find_held_lock+0x39/0x1c0 [ 430.313559] ? worker_thread+0x353/0x1120 [ 430.313559] ? worker_thread+0x353/0x1120 [ 430.313559] ? lock_contended+0xe70/0xe70 [ 430.313559] ? __lock_acquire+0x4500/0x4500 [ 430.535635] ? do_raw_spin_unlock+0xa5/0x330 [ 430.535635] ? do_raw_spin_trylock+0x101/0x1a0 [ 430.535635] ? do_raw_spin_lock+0x1f0/0x1f0 [ 430.535635] ? _raw_spin_lock_irq+0x10/0x70 [ 430.535635] worker_thread+0x15d/0x1120 [ ... ] Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-28rxrpc: Fix error distributionDavid Howells7-64/+16
Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-28rxrpc: Fix transport sockopts to get IPv4 errors on an IPv6 socketDavid Howells1-10/+13
It seems that enabling IPV6_RECVERR on an IPv6 socket doesn't also turn on IP_RECVERR, so neither local errors nor ICMP-transported remote errors from IPv4 peer addresses are returned to the AF_RXRPC protocol. Make the sockopt setting code in rxrpc_open_socket() fall through from the AF_INET6 case to the AF_INET case to turn on all the AF_INET options too in the AF_INET6 case. Fixes: f2aeed3a591f ("rxrpc: Fix error reception on AF_INET6 sockets") Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-28rxrpc: Make service call handling more robustDavid Howells5-60/+38
Make the following changes to improve the robustness of the code that sets up a new service call: (1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a service ID check and pass that along to rxrpc_new_incoming_call(). This means that I can remove the check from rxrpc_new_incoming_call() without the need to worry about the socket attached to the local endpoint getting replaced - which would invalidate the check. (2) Cache the rxrpc_peer struct, thereby allowing the peer search to be done once. The peer is passed to rxrpc_new_incoming_call(), thereby saving the need to repeat the search. This also reduces the possibility of rxrpc_publish_service_conn() BUG()'ing due to the detection of a duplicate connection, despite the initial search done by rxrpc_find_connection_rcu() having turned up nothing. This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be non-reentrant and the result of the initial search should still hold true, but it has proven possible to hit. I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short the iteration over the hash table if it finds a matching peer with a zero usage count, but I don't know for sure since it's only ever been hit once that I know of. Another possibility is that a bug in rxrpc_data_ready() that checked the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag might've let through a packet that caused a spurious and invalid call to be set up. That is addressed in another patch. (3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero usage count rather than stopping and returning not found, just in case there's another peer record behind it in the bucket. (4) Don't search the peer records in rxrpc_alloc_incoming_call(), but rather either use the peer cached in (2) or, if one wasn't found, preemptively install a new one. Fixes: 8496af50eb38 ("rxrpc: Use RCU to access a peer's service connection tree") Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-28rxrpc: Improve up-front incoming packet checkingDavid Howells2-28/+50
Do more up-front checking on incoming packets to weed out invalid ones and also ones aimed at services that we don't support. Whilst we're at it, replace the clearing of call and skew if we don't find a connection with just initialising the variables to zero at the top of the function. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-28rxrpc: Emit BUSY packets when supposed to rather than ABORTsDavid Howells4-18/+26
In the input path, a received sk_buff can be marked for rejection by setting RXRPC_SKB_MARK_* in skb->mark and, if needed, some auxiliary data (such as an abort code) in skb->priority. The rejection is handled by queueing the sk_buff up for dealing with in process context. The output code reads the mark and priority and, theoretically, generates an appropriate response packet. However, if RXRPC_SKB_MARK_BUSY is set, this isn't noticed and an ABORT message with a random abort code is generated (since skb->priority wasn't set to anything). Fix this by outputting the appropriate sort of packet. Also, whilst we're at it, most of the marks are no longer used, so remove them and rename the remaining two to something more obvious. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-28rxrpc: Fix RTT gatheringDavid Howells3-15/+33
Fix RTT information gathering in AF_RXRPC by the following means: (1) Enable Rx timestamping on the transport socket with SO_TIMESTAMPNS. (2) If the sk_buff doesn't have a timestamp set when rxrpc_data_ready() collects it, set it at that point. (3) Allow ACKs to be requested on the last packet of a client call, but not a service call. We need to be careful lest we undo: bf7d620abf22c321208a4da4f435e7af52551a21 Author: David Howells <dhowells@redhat.com> Date: Thu Oct 6 08:11:51 2016 +0100 rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase but that only really applies to service calls that we're handling, since the client side gets to send the final ACK (or not). (4) When about to transmit an ACK or DATA packet, record the Tx timestamp before only; don't update the timestamp afterwards. (5) Switch the ordering between recording the serial and recording the timestamp to always set the serial number first. The serial number shouldn't be seen referenced by an ACK packet until we've transmitted the packet bearing it - so in the Rx path, we don't need the timestamp until we've checked the serial number. Fixes: cf1a6474f807 ("rxrpc: Add per-peer RTT tracker") Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-28rxrpc: Fix checks as to whether we should set up a new callDavid Howells3-9/+15
There's a check in rxrpc_data_ready() that's checking the CLIENT_INITIATED flag in the packet type field rather than in the packet flags field. Fix this by creating a pair of helper functions to check whether the packet is going to the client or to the server and use them generally. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27ieee802154: mcr20a: Replace magic number with constantsXue Liu1-4/+4
The combination of defined constants are used to present the state of IRQ so the magic numbers has been replaced. This is a simple coding style change which should have no impact on runtime code execution. Signed-off-by: Xue Liu <liuxuenetmail@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.