| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ALSA control interface allows users to add arbitrary control elements
(called "user controls" or "user elements"), and its resource usage is
limited just by the max number of control sets (currently 32). This
limit, however, is quite loose: each allocation of control set may
have 1028 elements, and each element may have up to 512 bytes (ILP32) or
1024 bytes (LP64) of value data. Moreover, each control set may contain
the enum strings and TLV data, which can be up to 64kB and 128kB,
respectively. Totally, the whole memory consumption may go over 38MB --
it's quite large, and we'd rather like to reduce the size.
OTOH, there have been other requests even to increase the max number
of user elements; e.g. ALSA firewire stack require the more user
controls, hence we want to raise the bar, too.
For satisfying both requirements, this patch changes the management of
user controls: instead of setting the upper limit of the number of
user controls, we check the actual memory allocation size and set the
upper limit of the total allocation in bytes. As long as the memory
consumption stays below the limit, more user controls are allowed than
the current limit 32. At the same time, we set the lower limit (8MB)
as default than the current theoretical limit, in order to lower the
risk of DoS.
As a compromise for lowering the default limit, now the actual memory
limit is defined as a module option, 'max_user_ctl_alloc_size', so that
user can increase/decrease the limit if really needed, too.
Link: https://lore.kernel.org/r/s5htur3zl5e.wl-tiwai@suse.de
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210408103149.40357-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We've got a report about Acer Aspire E1 (PCI SSID 1025:0840) that
loses the speaker output after resume. With the comparison of COEF
dumps, it was identified that the COEF 0x0d bits 0x6000 corresponds to
the speaker amp.
This patch adds the specific quirk for the device to restore the COEF
bits at the codec (re-)initialization.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1183869
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407095730.12560-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The implicit feedback quirk table contains the entries that also
appear in the capture quirks, and those are all handled to be
skipped. For the code simplicity, drop the duped entries in the
playback quirk table, and check the match with the capture quirk table
instead.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212519
Link: https://lore.kernel.org/r/20210406113837.32041-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are a few calls of usb_driver_claim_interface() but all of those
miss the proper error checks, as reported by Coverity. This patch
adds those missing checks.
Along with it, replace the magic pointer with -1 with a constant
USB_AUDIO_IFACE_UNUSED for better readability.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1475943 ("Error handling issues")
Addresses-Coverity-ID: 1475944 ("Error handling issues")
Addresses-Coverity-ID: 1475945 ("Error handling issues")
Fixes: b1ce7ba619d9 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once")
Fixes: e5779998bf8b ("ALSA: usb-audio: refactor code")
Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook
Link: https://lore.kernel.org/r/20210406113534.30455-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a control to the card before copying the id so that the numid field
is initialized in the copy. Otherwise the numid field of active_id,
format_id, rate_id and channels_id will be the same (0) and
snd_ctl_notify() will not queue the events properly.
Signed-off-by: Jonas Holmberg <jonashg@axis.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407075428.2666787-1-jonashg@axis.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is another HP ZBook G5 model with the PCI SSID 103c:844f that
requires the same quirk for controlling the mute LED. Add the
corresponding entry to the quirk table.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212407
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210401171314.667-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If count is 16 then this will put the NUL terminator one element beyond
the end of the array.
Fixes: cb17fe0045aa ("ALSA: control - add sysfs support to the LED trigger module")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/YGcDOtrimR46vr0k@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When using the driver in I2S TDM mode, the fsl_esai_startup()
function rewrites the number of slots previously set by the
fsl_esai_set_dai_tdm_slot() function to 2.
To fix this, let's use the saved slot count value or, if TDM
is not used and the number of slots is not set, the driver will use
the default value (2), which is set by fsl_esai_probe().
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210402081405.9892-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It may be possible that the string pointer does not move
when parsing. Add a code which detects this state and
simply break the parser loop in this case.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210331180725.663623-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As static analysis reported, the prev_lops2 should contain
the previous lops2 pointer in snd_ctl_disconnect_layer().
Link: https://lore.kernel.org/alsa-devel/96e9bd5c-c8db-0db8-b393-fbf4a047dc80@canonical.com/
Fixes: 3f0638a0333b ("ALSA: control - add layer registration routines")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210331180702.663489-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
card->owner is a required property and since commit 81033c6b584b ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Add it.
This fixes following warning observed on Lamobo R1:
WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd]
Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ...
CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G C E 5.10.0-1-armmp #1 Debian 5.10.4-1
Hardware name: Allwinner sun7i (A20) Family
Call trace:
(snd_card_new [snd])
(snd_soc_bind_card [snd_soc_core])
(snd_soc_register_card [snd_soc_core])
(sun4i_codec_probe [sun4i_codec])
Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs")
Related: commit 3c27ea23ffb4 ("ASoC: qcom: Set card->owner to avoid warnings")
Related: commit ec653df2a0cb ("drm/vc4/vc4_hdmi: fill ASoC card owner")
Cc: linux-arm-kernel@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Bastian Germann <bage@linutronix.de>
Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need to manage the kcontrol entries association for the LED trigger
from the user space. This patch adds a layer to the sysfs tree like:
/sys/devices/virtual/sound/ctl-led/mic
+ card0
| + attach
| + detach
| ...
+ card1
+ attach
...
Operations:
attach and detach
- amixer style ID is accepted and easy strings for numid and
simple names
reset
- reset all associated kcontrol entries
list
- list associated kcontrol entries (numid values only)
Additional symlinks:
/sys/devices/virtual/sound/ctl-led/mic/card0/card ->
/sys/class/sound/card0
/sys/class/sound/card0/controlC0/led-mic ->
/sys/devices/virtual/sound/ctl-led/mic/card0
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-7-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Create SYSFS/devices/virtual/sound/ctl-led tree
(with SYSFS/class/sound/ctl-led symlink).
speaker/
+-- mode
+-- brightness
mic/
+-- mode
+-- brightness
Copy the idea from the HDA driver and allow to set the audio
LEDs based on the various modes:
- follow mute
- follow moute (inverted to follow mute)
- off
- on
Also, the actual LED state is exposed.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-6-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
With the new snd-ctl-led module, we have a generic way
to trigger audio LEDs based on the sound control changes.
Remove the custom implementation from the HDA driver.
Move the LED initialization before snd_hda_gen_parse_auto_config()
call in all drivers to create marked controls there.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-5-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent laptops have usually two LEDs assigned to reflect
the speaker and microphone mute state. This implementation
adds a tiny layer on top of the control API which calculates
the state for those LEDs using the driver callbacks.
Two new access flags are introduced to describe the controls
which affects the audio path settings (an easy code change
for drivers).
The LED resource can be shared with multiple sound cards with
this code. The user space controls may be added to the state
chain on demand, too.
This code should replace the LED code in the HDA driver and
add a possibility to easy extend the other drivers (ASoC
codecs etc.).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-4-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The layer registration allows to handle an extra functionality
on top of the control API. It can be used for the audio
LED control for example.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-3-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This helper is required for the following generic LED mute
patch. The helper also simplifies some other functions.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-2-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
modification in commit 2a3f7221acdd ("ALSA: core: Fix card races between
register and disconnect") resulting in this problem.
Fixes: 2a3f7221acdd ("ALSA: core: Fix card races between register and disconnect")
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/1616989007-34429-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP EliteBook 640 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210330114428.40490-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recently added PM prepare and complete callbacks don't have the
sanity check whether the card instance has been properly initialized,
which may potentially lead to Oops.
This patch adds the azx_is_pm_ready() call in each place
appropriately like other PM callbacks.
Fixes: f5dac54d9d93 ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The card power state change via snd_power_change_state() at the system
suspend/resume seems dropped mistakenly during the PM code rewrite.
The card power state doesn't play much role nowadays but it's still
referred in a few places such as the HDMI codec driver.
This patch restores them, but in a more appropriate place now in the
prepare and complete callbacks.
Fixes: f5dac54d9d93 ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Function "for_each_available_child_of_node" should have of_node_put()
before return around line 1352.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
CC: Sumera Priyadarsini <sylphrenadin@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103281651320.2854@hadrien
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Logitech ConferenceCam Connect is a compound USB device with UVC and
UAC. Not 100% reproducible but sometimes it keeps responding STALL to
every control transfer once it receives get_freq request.
This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
There is an assignment to io that is never read after the assignment,
the assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As tasks always wait and kill their io-wq on exec/exit, files are of no
more concern to us, so we don't need to specifically cancel them by hand
in those cases. Moreover we should not, because io_match_task() looks at
req->task->files now, which is always true and so leads to extra
cancellations, that wasn't a case before per-task io-wq.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0566c1de9b9dd417f5de345c817ca953580e0e2e.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't account usual timeouts (i.e. not linked) as REQ_F_INFLIGHT but
keep behaviour prior to dd59a3d595cc1 ("io_uring: reliably cancel linked
timeouts").
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/104441ef5d97e3932113d44501fda0df88656b83.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't forget about io_commit_cqring() + io_cqring_ev_posted() after
exit/exec cancelling timeouts. Both functions declared only after
io_kill_timeouts(), so to avoid tons of forward declarations move
it down.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/72ace588772c0f14834a6a4185d56c445a366fb4.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When we cancel a timeout we should emit a sensible return code, like
-ECANCELED but not 0, otherwise it may trick users.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7b0ad1065e3bd1994722702bd0ba9e7bc9b0683b.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 4db4b1a0d1779dc159f7b87feb97030ec0b12597.
The IO threads allow and handle SIGSTOP now, so don't special case them
anymore in task_set_jobctl_pending().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 15b2219facadec583c24523eed40fa45865f859f.
Before IO threads accepted signals, the freezer using take signals to wake
up an IO thread would cause them to loop without any way to clear the
pending signal. That is no longer the case, so stop special casing
PF_IO_WORKER in the freezer.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 6fb8f43cede0e4bd3ead847de78d531424a96be9.
The IO threads do allow signals now, including SIGSTOP, and we can allow
ptrace attach. Attaching won't reveal anything interesting for the IO
threads, but it will allow eg gdb to attach to a task with io_urings
and IO threads without complaining. And once attached, it will allow
the usual introspection into regular threads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 5be28c8f85ce99ed2d329d2ad8bdd18ea19473a5.
IO threads now take signals just fine, so there's no reason to limit them
specifically. Revert the change that prevented that from happening.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is racy - move the blocking into when the task is created and
we're marking it as PF_IO_WORKER anyway. The IO threads are now
prepared to handle signals like SIGSTOP as well, so clear that from
the mask to allow proper stopping of IO threads.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We go through various hoops to disallow signals for the IO threads, but
there's really no reason why we cannot just allow them. The IO threads
never return to userspace like a normal thread, and hence don't go through
normal signal processing. Instead, just check for a pending signal as part
of the work loop, and call get_signal() to handle it for us if anything
is pending.
With that, we can support receiving signals, including special ones like
SIGSTOP.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") drops the
check on max supported number of partitionsr, and allows partition with
bigger partition numbers to be added. However, ->bd_partno is defined as
u8, so partition index of xarray table may not match with ->bd_partno.
Then delete_partition() may delete one unmatched partition, and caused
use-after-free.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com
Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1. The debug message which is printed for
these unknown handles may also be misleading, so fix that too.
The SMB2 lease break path is not affected by this patch.
Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".
CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
00000000: 424d53fe 00000040 00000000 00000012 .SMB@...........
00000010: 00000001 00000000 ffffffff ffffffff ................
00000020: 00000000 00000000 00000000 00000000 ................
00000030: 00000000 00000000 00000000 00000000 ................
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
RHBZ: 1933527
Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
My recent fixes to cifsacl to maintain inherited ACEs had
regressed modefromsid when an older ACL already exists.
Found testing xfstest 495 with modefromsid mount option
Fixes: f5065508897a ("cifs: Retain old ACEs when converting between mode bits and ACL")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Right now we're never calling get_signal() from PF_IO_WORKER threads, but
in preparation for doing so, don't handle a fatal signal for them. The
workers have state they need to cleanup when exiting, so just return
instead of calling do_exit() on their behalf. The threads themselves will
detect a fatal signal and do proper shutdown.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.
Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Dan's address bounces, and has been bouncing for some time as he moved
to other projects.
I believe TI should be more careful with this, and should assign
alternate contacts for their drivers.
Anyway what we can do now is to remove the obsolete address.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For AES256 encryption (GCM and CCM), we need to adjust the size of a few
fields to 32 bytes instead of 16 to accommodate the larger keys.
Also, the L value supplied to the key generator needs to be changed from
to 256 when these algorithms are used.
Keeping the ioctl struct for dumping keys of the same size for now.
Will send out a different patch for that one.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When executing the daemon test on Arm64 and x86 with Debian (Buster)
distro, both skip the test case with the log:
# ./perf test -v 76
76: daemon operations :
--- start ---
test child forked, pid 11687
test daemon list
trap: SIGINT: bad trap
./tests/shell/daemon.sh: 173: local: cpu-clock: bad variable name
test child finished with -2
---- end ----
daemon operations: Skip
So the error happens for the variable expansion when use local variable
in the shell script. Since Debian Buster uses dash but not bash as
non-interactive shell, when execute the daemon testing, it hits a known
issue for dash which was reported [1].
To resolve this issue, one option is to add double quotes for all local
variables assignment, so need to change the code from:
local line=`perf daemon --config ${config} -x: | head -2 | tail -1`
... to:
local line="`perf daemon --config ${config} -x: | head -2 | tail -1`"
But the testing script has bunch of local variables, this leads to big
changes for whole script.
On the other hand, the testing script asks to use the "local" feature
which is bash-specific, so this patch explicitly uses "#!/bin/bash" to
ensure running the script with bash.
After:
# ./perf test -v 76
76: daemon operations :
--- start ---
test child forked, pid 11329
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [11596]'
signal 12 sent to session 'test [11596]'
test daemon ping
test daemon lock
test child finished with 0
---- end ----
daemon operations: Ok
[1] https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097
Fixes: 2291bb915b55 ("perf tests: Add daemon 'list' command test")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210320104554.529213-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
s/unconditonally/unconditionally/
s/succesful/successful/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210326064211.6509-1-unixbhaskar@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Rear Mic on Lenovo P620 cannot record after S3, despite that there's no
error and the other two functions of the USB audio, Line In and Line
Out, work just fine.
The mic starts to work again after running userspace app like "alsactl
store". Following the lead, the evidence shows that as soon as connector
status is queried, the mic can work again.
So also check connector value on resume to "wake up" the USB audio to
make it functional.
This can be device specific, however I think this generic approach may
benefit more than one device.
Now the resume callback checks connector, and a new callback,
reset_resume, to also restore switches and volumes.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210325165918.22593-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is preparation for next patch, no functional change intended.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210325165918.22593-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Takashi Sakamoto
Takashi Iwai
Jonas Holmberg
Dan Carpenter
Alexander Shiyan
Srinivas Kandagatla
Jaroslav Kysela
Bastian Germann
Jia Zhou
Jeremy Szu
kernel test robot
Ikjoon Jang
Linus Torvalds
Colin Ian King
Pavel Begunkov
Jens Axboe
Ming Lei
Steve French
Vincent Whitchurch
Ronnie Sahlberg
Shyam Prasad N
Mikulas Patocka
Pavel Machek
Leo Yan
Bhaskar Chowdhury
Kai-Heng Feng