aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/cpu.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-03-14cpu/hotplug: Serialize callback invocations properSebastian Andrzej Siewior1-14/+14
The setup/remove_state/instance() functions in the hotplug core code are serialized against concurrent CPU hotplug, but unfortunately not serialized against themself. As a consequence a concurrent invocation of these function results in corruption of the callback machinery because two instances try to invoke callbacks on remote cpus at the same time. This results in missing callback invocations and initiator threads waiting forever on the completion. The obvious solution to replace get_cpu_online() with cpu_hotplug_begin() is not possible because at least one callsite calls into these functions from a get_online_cpu() locked region. Extend the protection scope of the cpuhp_state_mutex from solely protecting the state arrays to cover the callback invocation machinery as well. Fixes: 5b7aa87e0482 ("cpu/hotplug: Implement setup/removal interface") Reported-and-tested-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: hpa@zytor.com Cc: mingo@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20170314150645.g4tdyoszlcbajmna@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task.h>Ingo Molnar1-0/+1
We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to <linux/sched/hotplug.h>Ingo Molnar1-0/+1
We are going to split <linux/sched/hotplug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/hotplug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>Ingo Molnar1-1/+1
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-18cpu/hotplug: Remove unused but set variable in _cpu_down()Tobias Klauser1-2/+0
After the recent removal of the hotplug notifiers the variable 'hasdied' in _cpu_down() is set but no longer read, leading to the following GCC warning when building with 'make W=1': kernel/cpu.c:767:7: warning: variable ‘hasdied’ set but not used [-Wunused-but-set-variable] Fix it by removing the variable. Fixes: 530e9b76ae8f ("cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20170117143501.20893-1-tklauser@distanz.ch Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-16cpu/hotplug: Provide dynamic range for prepare stageThomas Gleixner1-4/+18
Mathieu reported that the LTTNG modules are broken as of 4.10-rc1 due to the removal of the cpu hotplug notifiers. Usually I don't care much about out of tree modules, but LTTNG is widely used in distros. There are two ways to solve that: 1) Reserve a hotplug state for LTTNG 2) Add a dynamic range for the prepare states. While #1 is the simplest solution, #2 is the proper one as we can convert in tree users, which do not care about ordering, to the dynamic range as well. Add a dynamic range which allows LTTNG to request states in the prepare stage. Reported-and-tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701101353010.3401@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-26smp/hotplug: Undo tglxs brainfartThomas Gleixner1-1/+8
The attempt to prevent overwriting an active state resulted in a disaster which effectively disables all dynamically allocated hotplug states. Cleanup the mess. Fixes: dc280d936239 ("cpu/hotplug: Prevent overwriting of callbacks") Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25cpu/hotplug: Remove obsolete cpu hotplug register/unregister functionsThomas Gleixner1-138/+1
hotcpu_notifier(), cpu_notifier(), __hotcpu_notifier(), __cpu_notifier(), register_hotcpu_notifier(), register_cpu_notifier(), __register_hotcpu_notifier(), __register_cpu_notifier(), unregister_hotcpu_notifier(), unregister_cpu_notifier(), __unregister_hotcpu_notifier(), __unregister_cpu_notifier() are unused now. Remove them and all related code. Remove also the now pointless cpu notifier error injection mechanism. The states can be executed step by step and error rollback is the same as cpu down, so any state transition can be tested w/o requiring the notifier error injection. Some CPU hotplug states are kept as they are (ab)used for hotplug state tracking. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20161221192112.005642358@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25cpu/hotplug: Prevent overwriting of callbacksThomas Gleixner1-46/+50
Developers manage to overwrite states blindly without thought. That's fatal and hard to debug. Add sanity checks to make it fail. This requries to restructure the code so that the dynamic state allocation happens in the same lock protected section as the actual store. Otherwise the previous assignment of 'Reserved' to the name field would trigger the overwrite check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192111.675234535@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-15cpu/hotplug: Clarify description of __cpuhp_setup_state() return valueBoris Ostrovsky1-1/+5
When invoked with CPUHP_AP_ONLINE_DYN state __cpuhp_setup_state() is expected to return positive value which is the hotplug state that the routine assigns. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: linux-pm@vger.kernel.org Cc: viresh.kumar@linaro.org Cc: bigeasy@linutronix.de Cc: rjw@rjwysocki.net Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1481814058-4799-2-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-08hotplug: Make register and unregister notifier API symmetricMichal Hocko1-1/+1
Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its notifiers when HOTPLUG_CPU=y while the registration might succeed even when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap might keep a stale notifier on the list on the manual clean up during the pool tear down and thus corrupt the list. Resulting in the following [ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78 [ 144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40 <snipped> [ 145.122628] Call Trace: [ 145.125086] [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20 [ 145.131350] [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400 [ 145.137268] [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300 [ 145.143188] [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10 [ 145.149018] [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30 [ 145.154940] [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0 [ 145.160511] [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20 [ 145.167035] [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0 [ 145.172694] [<ffffffffa290848d>] module_attr_store+0x1d/0x30 [ 145.178443] [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70 [ 145.183925] [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180 [ 145.189761] [<ffffffffa2a99248>] __vfs_write+0x18/0x40 [ 145.194982] [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0 [ 145.200122] [<ffffffffa2a9a732>] SyS_write+0x52/0xa0 [ 145.205177] [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17 This can be even triggered manually by changing /sys/module/zswap/parameters/compressor multiple times. Fix this issue by making unregister APIs symmetric to the register so there are no surprises. Fixes: 47e627bc8c9a ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU") Reported-and-tested-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: linux-mm@kvack.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Streetman <ddstreet@ieee.org> Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-16cpu/hotplug: Use distinct name for cpu_hotplug.dep_mapJoonas Lahtinen1-1/+1
Use distinctive name for cpu_hotplug.dep_map to avoid the actual cpu_hotplug.lock appearing as cpu_hotplug.lock#2 in lockdep splats. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gautham R . Shenoy <ego@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: intel-gfx@lists.freedesktop.org Cc: trivial@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-03Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-181/+331
Pull CPU hotplug updates from Thomas Gleixner: "Yet another batch of cpu hotplug core updates and conversions: - Provide core infrastructure for multi instance drivers so the drivers do not have to keep custom lists. - Convert custom lists to the new infrastructure. The block-mq custom list conversion comes through the block tree and makes the diffstat tip over to more lines removed than added. - Handle unbalanced hotplug enable/disable calls more gracefully. - Remove the obsolete CPU_STARTING/DYING notifier support. - Convert another batch of notifier users. The relayfs changes which conflicted with the conversion have been shipped to me by Andrew. The remaining lot is targeted for 4.10 so that we finally can remove the rest of the notifiers" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) cpufreq: Fix up conversion to hotplug state machine blk/mq: Reserve hotplug states for block multiqueue x86/apic/uv: Convert to hotplug state machine s390/mm/pfault: Convert to hotplug state machine mips/loongson/smp: Convert to hotplug state machine mips/octeon/smp: Convert to hotplug state machine fault-injection/cpu: Convert to hotplug state machine padata: Convert to hotplug state machine cpufreq: Convert to hotplug state machine ACPI/processor: Convert to hotplug state machine virtio scsi: Convert to hotplug state machine oprofile/timer: Convert to hotplug state machine block/softirq: Convert to hotplug state machine lib/irq_poll: Convert to hotplug state machine x86/microcode: Convert to hotplug state machine sh/SH-X3 SMP: Convert to hotplug state machine ia64/mca: Convert to hotplug state machine ARM/OMAP/wakeupgen: Convert to hotplug state machine ARM/shmobile: Convert to hotplug state machine arm64/FP/SIMD: Convert to hotplug state machine ...
2016-10-03Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+1
Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - Expedited grace-period changes, most notably avoiding having user threads drive expedited grace periods, using a workqueue instead. - Miscellaneous fixes, including a performance fix for lists that was sent with the lists modifications. - CPU hotplug updates, most notably providing exact CPU-online tracking for RCU. This will in turn allow removal of the checks supporting RCU's prior heuristic that was based on the assumption that CPUs would take no longer than one jiffy to come online. - Torture-test updates. - Documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) list: Expand list_first_entry_or_null() torture: TOROUT_STRING(): Insert a space between flag and message rcuperf: Consistently insert space between flag and message rcutorture: Print out barrier error as document says torture: Add task state to writer-task stall printk()s torture: Convert torture_shutdown() to hrtimer rcutorture: Convert to hotplug state machine cpu/hotplug: Get rid of CPU_STARTING reference rcu: Provide exact CPU-online tracking for RCU rcu: Avoid redundant quiescent-state chasing rcu: Don't use modular infrastructure in non-modular code sched: Make wake_up_nohz_cpu() handle CPUs going offline rcu: Use rcu_gp_kthread_wake() to wake up grace period kthreads rcu: Use RCU's online-CPU state for expedited IPI retry rcu: Exclude RCU-offline CPUs from expedited grace periods rcu: Make expedited RCU CPU stall warnings respond to controls rcu: Stop disabling expedited RCU CPU stall warnings rcu: Drive expedited grace periods from workqueue rcu: Consolidate expedited grace period machinery documentation: Record reason for rcu_head two-byte alignment ...
2016-09-06slab: Convert to hotplug state machineSebastian Andrzej Siewior1-0/+6
Install the callbacks via the state machine. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: rt@linutronix.de Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Link: http://lkml.kernel.org/r/20160823125319.abeapfjapf2kfezp@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06relayfs: Convert to hotplug state machineRichard Weinberger1-0/+6
Install the callbacks via the state machine. They are installed at run time but relay_prepare_cpu() does not need to be invoked by the boot CPU because relay_open() was not yet invoked and there are no pools that need to be created. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20160818125731.27256-3-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06cpu/hotplug: Remove CPU_STARTING and CPU_DYING notifierThomas Gleixner1-28/+2
All users are converted to state machine, remove CPU_STARTING and the corresponding CPU_DYING. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160818125731.27256-2-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06cpu/hotplug: Make state names consistentThomas Gleixner1-7/+7
We should have all names in the scheme "[subsys/]facility:state]". Fix the core to comply. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-05cpu/hotplug: Replace anon unionThomas Gleixner1-71/+74
Some compilers are unhappy with the anon union in the state array. Replace it with a named union. While at it align the state array initializers proper and add the missing name tags. Fixes: cf392d10b69e "cpu/hotplug: Add multi instance support" Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Fenguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de
2016-09-02cpu/hotplug: Handle unbalanced hotplug enable/disableLianwei Wang1-2/+9
When cpu_hotplug_enable() is called unbalanced w/o a preceeding cpu_hotplug_disable() the code emits a warning, but happily decrements the disabled counter. This causes the next operations to malfunction. Prevent the decrement and just emit a warning. Signed-off-by: Lianwei Wang <lianwei.wang@gmail.com> Cc: peterz@infradead.org Cc: linux-pm@vger.kernel.org Cc: oleg@redhat.com Link: http://lkml.kernel.org/r/1465541008-12476-1-git-send-email-lianwei.wang@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-02cpu/hotplug: Add multi instance supportThomas Gleixner1-35/+183
This patch adds the ability for a given state to have multiple instances. Until now all states have a single instance and the startup / teardown callback use global variables. A few drivers need to perform a the same callbacks on multiple "instances". Currently we have three drivers in tree which all have a global list which they iterate over. With multi instance they support don't need their private list and the functionality has been moved into core code. Plus we hold the hotplug lock in core so no cpus comes/goes while instances are registered and we do rollback in error case :) Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/1471024183-12666-3-git-send-email-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-02cpu/hotplug: Rework callback invocation logicThomas Gleixner1-82/+80
This is preparation for the following patch. This rework here changes the arguments of cpuhp_invoke_callback(). It passes now `state' and whether `startup' or `teardown' callback should be invoked. The callback then is looked up by the function. The following is a clanup of callers: - cpuhp_issue_call() has one argument less - struct cpuhp_cpu_state (which is used by the hotplug thread) gets also its callback removed. The decision if it is a single callback invocation moved to the `single' variable. Also a `bringup' variable has been added to distinguish between startup and teardown callback. - take_cpu_down() needs to start one step earlier. We always get here via CPUHP_TEARDOWN_CPU callback. Before that change cpuhp_ap_states + CPUHP_TEARDOWN_CPU pointed to an empty entry because TEARDOWN is saved in bp_states for this reason. Now that we use cpuhp_get_step() to lookup the state we must explicitly skip it in order not to invoke it twice. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/1471024183-12666-2-git-send-email-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-26cpu/hotplug: Allow suspend/resume CPU to be specifiedJames Morse1-4/+5
disable_nonboot_cpus() assumes that the lowest numbered online CPU is the boot CPU, and that this is the correct CPU to run any power management code on. On x86 this is always correct, as CPU0 cannot (easily) by taken offline. On arm64 CPU0 can be taken offline. For hibernate/resume this means we may hibernate on a CPU other than CPU0. If the system is rebooted with kexec 'CPU0' will be assigned to a different physical CPU. This complicates hibernate/resume as now we can't trust the CPU numbers. Arch code can find the correct physical CPU, and ensure it is online before resume from hibernate begins, but also needs to influence disable_nonboot_cpus()s choice of CPU. Rename disable_nonboot_cpus() as freeze_secondary_cpus() and add an argument indicating which CPU should be left standing. Follow the logic in migrate_to_reboot_cpu() to use the lowest numbered online CPU if the requested CPU is not online. Add disable_nonboot_cpus() as an inline function that has the existing behaviour. Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-22cpu/hotplug: Get rid of CPU_STARTING referenceSebastian Andrzej Siewior1-1/+1
CPU_STARTING is scheduled for removal. There is no use of it in drivers and core code uses it only for compatibility with old-style CPU-hotplug notifiers. This patch removes therefore removes CPU_STARTING from an RCU-related comment. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-08-22rcu: Provide exact CPU-online tracking for RCUPaul E. McKenney1-0/+1
Up to now, RCU has assumed that the CPU-online process makes it from CPU_UP_PREPARE to set_cpu_online() within one jiffy. Given the recent rise of virtualized environments, this assumption is very clearly obsolete. Failing to meet this deadline can result in RCU paying attention to an incoming CPU for one jiffy, then ignoring it until the grace period following the one in which that CPU sets itself online. This situation might prove to be fatally disappointing to any RCU read-side critical sections that had the misfortune to execute during the time in which RCU was ignoring the slow-to-come-online CPU. This commit therefore updates RCU's internal CPU state-tracking information at notify_cpu_starting() time, thus providing RCU with an exact transition of the CPU's state from offline to online. Note that this means that incoming CPUs must not use RCU read-side critical section (other than those of SRCU) until notify_cpu_starting() time. Note also that the CPU_STARTING notifiers -are- allowed to use RCU read-side critical sections. (Of course, CPU-hotplug notifiers are rapidly becoming obsolete, so you need to act fast!) If a given architecture or CPU family needs to use RCU read-side critical sections earlier, the call to rcu_cpu_starting() from notify_cpu_starting() will need to be architecture-specific, with architectures that need early use being required to hand-place the call to rcu_cpu_starting() at some point preceding the call to notify_cpu_starting(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-08-10cpu/hotplug: Prevent alloc/free of irq descriptors during CPU up/down (again)Boris Ostrovsky1-0/+8
Now that Xen no longer allocates irqs in _cpu_up() we can restore commit: a89941816726 ("hotplug: Prevent alloc/free of irq descriptors during cpu up/down") Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: david.vrabel@citrix.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1470244948-17674-3-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-28timers/core: Correct callback order during CPU hot plugRichard Cochran1-5/+10
On the tear-down path, the dead CPU callback for the timers was misplaced within the 'cpuhp_state' enumeration. There is a hidden dependency between the timers and block multiqueue. The timers callback must happen before the block multiqueue callback otherwise a RCU stall occurs. Move the timers callback to the proper place in the state machine. Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com> Reported-by: kbuild test robot <lkp@intel.com> Fixes: 24f73b99716a ("timers/core: Convert to hotplug state machine") Signed-off-by: Richard Cochran <rcochran@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: John Stultz <john.stultz@linaro.org> Cc: rt@linutronix.de Cc: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1469610498-25914-1-git-send-email-rcochran@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15rcu: Convert rcutree to hotplug state machineThomas Gleixner1-0/+14
Straight forward conversion to the state machine. Though the question arises whether this needs really all these state transitions to work. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.982013161@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15smp/cfd: Convert core to hotplug state machineRichard Weinberger1-0/+9
Install the callbacks via the state machine. They are installed at runtime so smpcfd_prepare_cpu() needs to be invoked by the boot-CPU. Signed-off-by: Richard Weinberger <richard@nod.at> [ Added the dropped CPU dying case back in. ] Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Davidlohr Bueso <dave@stgolabs> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.818376366@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15timers/core: Convert to hotplug state machineRichard Cochran1-0/+5
When tearing down, call timers_dead_cpu() before notify_dead(). There is a hidden dependency between: - timers - block multiqueue - rcutree If timers_dead_cpu() comes later than blk_mq_queue_reinit_notify() that latter function causes a RCU stall. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.566790058@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15hrtimer: Convert to hotplug state machineThomas Gleixner1-0/+5
Split out the clockevents callbacks instead of piggybacking them on hrtimers. This gets rid of a POST_DEAD user. See commit: 54e88fad223c ("sched: Make sure timers have migrated before killing the migration_thread") We just move the callback state to the proper place in the state machine. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.485419196@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14workqueue: Convert to state machine callbacksThomas Gleixner1-0/+10
Get rid of the prio ordering of the separate notifiers and use a proper state callback pair. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153335.197083890@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14perf/core: Convert to hotplug state machineThomas Gleixner1-0/+11
Actually a nice symmetric startup/teardown pair which fits properly into the state machine concept. In the long run we should be able to invoke the startup callback for the boot CPU via the state machine and get rid of the init function which invokes it on the boot CPU. Note: This comes actually before the perf hardware callbacks. In the notifier model the hardware callbacks have a higher priority than the core callback. But that's solely for CPU offline so that hardware migration of events happens before the core is notified about the outgoing CPU. With the symetric state array model we have the following ordering: UP: core -> hardware DOWN: hardware -> core Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Siewior <bigeasy@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153333.587514098@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14cpu/hotplug: Handle early registration gracefullyThomas Gleixner1-0/+7
We switched the hotplug machinery to smpboot threads. Early registration of hotplug callbacks, i.e. from do_pre_smp_initcalls(), happens before the threads are initialized. Instead of moving the thread init, we simply handle it in the hotplug code itself and invoke the function directly. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153332.896450738@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13cpu/hotplug: Keep enough storage space if SMP=n to avoid array out of bounds scribbleThomas Gleixner1-0/+2
Xiaolong Ye reported lock debug warnings triggered by the following commit: 8de4a0066106 ("perf/x86: Convert the core to the hotplug state machine") The bug is the following: the cpuhp_bp_states[] array is cut short when CONFIG_SMP=n, but the dynamically registered callbacks are stored nevertheless and happily scribble outside of the array bounds... We need to store them in case that the state is unregistered so we can invoke the teardown function. That's independent of CONFIG_SMP. Make sure the array is large enough. Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Adam Borowski <kilobyte@angband.pl> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: lkp@01.org Cc: stable@vger.kernel.org Cc: tipbuild@zytor.com Fixes: cff7d378d3fd "cpu/hotplug: Convert to a state machine for the control processor" Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607122144560.4083@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-06sched/hotplug: Make activate() the last hotplug stepThomas Gleixner1-6/+9
The scheduler can handle per cpu threads before the cpu is set to active and it does not allow user space threads on the cpu before active is set. Attaching to the scheduling domains is also not required before user space threads can be handled. Move the activation to the end of the hotplug state space. That also means that deactivation is the first action when a cpu is shut down. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160310120025.597477199@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06sched/hotplug: Move migration CPU_DYING to sched_cpu_dying()Thomas Gleixner1-1/+1
Remove the hotplug notifier and make it an explicit state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160310120025.502222097@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06sched/hotplug: Move sync_rcu to be with set_cpu_active(false)Peter Zijlstra1-15/+0
The sync_rcu stuff is specificically for clearing bits in the active mask, such that everybody will observe the bit cleared and will not consider the cleared CPU for load-balancing etc. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160310120025.169219710@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06sched/hotplug: Convert cpu_[in]active notifiers to state machineThomas Gleixner1-2/+6
Now that we reduced everything into single notifiers, it's simple to move them into the hotplug state machine space. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06sched: Make set_cpu_rq_start_time() a built in hotplug stateThomas Gleixner1-0/+6
Start distangling the maze of hotplug notifiers in the scheduler. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-22cpu/hotplug: Fix rollback during error-out in __cpu_disable()Sebastian Andrzej Siewior1-7/+26
The recent introduction of the hotplug thread which invokes the callbacks on the plugged cpu, cased the following regression: If takedown_cpu() fails, then we run into several issues: 1) The rollback of the target cpu states is not invoked. That leaves the smp threads and the hotplug thread in disabled state. 2) notify_online() is executed due to a missing skip_onerr flag. That causes that both CPU_DOWN_FAILED and CPU_ONLINE notifications are invoked which confuses quite some notifiers. 3) The CPU_DOWN_FAILED notification is not invoked on the target CPU. That's not an issue per se, but it is inconsistent and in consequence blocks the patches which rely on these states being invoked on the target CPU and not on the controlling cpu. It also does not preserve the strict call order on rollback which is problematic for the ongoing state machine conversion as well. To fix this we add a rollback flag to the remote callback machinery and invoke the rollback including the CPU_DOWN_FAILED notification on the remote cpu. Further mark the notify online state with 'skip_onerr' so we don't get a double invokation. This workaround will go away once we moved the unplug invocation to the target cpu itself. [ tglx: Massaged changelog and moved the CPU_DOWN_FAILED notifiaction to the target cpu ] Fixes: 4cb28ced23c4 ("cpu/hotplug: Create hotplug threads") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: rt@linutronix.de Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: http://lkml.kernel.org/r/20160408124015.GA21960@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-12cpu/hotplug: Document states betterThomas Gleixner1-1/+46
Requested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-10cpu/hotplug: Fix smpboot thread orderingThomas Gleixner1-2/+3
Commit 931ef163309e moved the smpboot thread park/unpark invocation to the state machine. The move of the unpark invocation was premature as it depends on work in progress patches. As a result cpu down can fail, because rcu synchronization in takedown_cpu() eventually requires a functional softirq thread. I never encountered the problem in testing, but 0day testing managed to provide a reliable reproducer. Remove the smpboot_threads_park() call from the state machine for now and put it back into the original place after the rcu synchronization. I'm embarrassed as I knew about the dependency and still managed to get it wrong. Hotplug induced brain melt seems to be the only sensible explanation for that. Fixes: 931ef163309e "cpu/hotplug: Unpark smpboot threads from the state machine" Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-03-06cpu/hotplug: Remove redundant state checkThomas Gleixner1-2/+0
The check for the AP range in cpuhp_is_ap_state() is redundant after commit 8df3e07e7f21 "cpu/hotplug: Let upcoming cpu bring itself fully up" because all states above CPUHP_BRINGUP_CPU are invoked on the hotplugged cpu. Remove it. Reported-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-03cpu/hotplug: Plug death reporting raceThomas Gleixner1-2/+14
Paul noticed that the conversion of the death reporting introduced a race where the outgoing cpu might be delayed after waking the controll processor, so it might not be able to call rcu_report_dead() before being physically removed, leading to RCU stalls. We cant call complete after rcu_report_dead(), so instead of going back to busy polling, simply issue a function call to do the completion. Fixes: 27d50c7eeb0f "rcu: Make CPU_DYING_IDLE an explicit call" Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20160302201127.GA23440@linux.vnet.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org>
2016-03-01rcu: Make CPU_DYING_IDLE an explicit callThomas Gleixner1-0/+1
Make the RCU CPU_DYING_IDLE callback an explicit function call, so it gets invoked at the proper place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.870167933@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Make wait for dead cpu completion basedThomas Gleixner1-4/+12
Kill the busy spinning on the control side and just wait for the hotplugged cpu to tell that it reached the dead state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.776157858@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Let upcoming cpu bring itself fully upThomas Gleixner1-29/+37
Let the upcoming cpu kick the hotplug thread and let itself complete the bringup. That way the controll side can just wait for the completion or later when we made the hotplug machinery async not care at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.697655464@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Move online calls to hotplugged cpuThomas Gleixner1-48/+96
Let the hotplugged cpu invoke the setup/teardown callbacks (CPU_ONLINE/CPU_DOWN_PREPARE) itself. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.536364371@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Create hotplug threadsThomas Gleixner1-1/+144
In order to let the hotplugged cpu take care of the setup/teardown, we need a seperate hotplug thread. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.454541272@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.