Age | Commit message (Collapse) | Author | Files | Lines |
|
Dave Jones' system call fuzz testing tool "trinity" triggered the
following bug error with slab debugging enabled
=============================================================================
BUG numa_policy (Not tainted): Poison overwritten
-----------------------------------------------------------------------------
INFO: 0xffff880146498250-0xffff880146498250. First byte 0x6a instead of 0x6b
INFO: Allocated in mpol_new+0xa3/0x140 age=46310 cpu=6 pid=32154
__slab_alloc+0x3d3/0x445
kmem_cache_alloc+0x29d/0x2b0
mpol_new+0xa3/0x140
sys_mbind+0x142/0x620
system_call_fastpath+0x16/0x1b
INFO: Freed in __mpol_put+0x27/0x30 age=46268 cpu=6 pid=32154
__slab_free+0x2e/0x1de
kmem_cache_free+0x25a/0x260
__mpol_put+0x27/0x30
remove_vma+0x68/0x90
exit_mmap+0x118/0x140
mmput+0x73/0x110
exit_mm+0x108/0x130
do_exit+0x162/0xb90
do_group_exit+0x4f/0xc0
sys_exit_group+0x17/0x20
system_call_fastpath+0x16/0x1b
INFO: Slab 0xffffea0005192600 objects=27 used=27 fp=0x (null) flags=0x20000000004080
INFO: Object 0xffff880146498250 @offset=592 fp=0xffff88014649b9d0
This implied a reference counting bug and the problem happened during
mbind().
mbind() applies a new memory policy to a range and uses mbind_range() to
merge existing VMAs or split them as necessary. In the event of splits,
mpol_dup() will allocate a new struct mempolicy and maintain existing
reference counts whose rules are documented in
Documentation/vm/numa_memory_policy.txt .
The problem occurs with shared memory policies. The vm_op->set_policy
increments the reference count if necessary and split_vma() and
vma_merge() have already handled the existing reference counts.
However, policy_vma() screws it up by replacing an existing
vma->vm_policy with one that potentially has the wrong reference count
leading to a premature free. This patch removes the damage caused by
policy_vma().
With this patch applied Dave's trinity tool runs an mbind test for 5
minutes without error. /proc/slabinfo reported that there are no
numa_policy or shared_policy_node objects allocated after the test
completed and the shared memory region was deleted.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Dave Jones <davej@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Stephen Wilson <wilsons@start.ca>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit cb04ff9ac424 ("sched, perf: Use a single
callback into the scheduler").
Before this change was introduced, the process switch worked
like this (wrt. to perf event schedule):
schedule (prev, next)
- schedule out all perf events for prev
- switch to next
- schedule in all perf events for current (next)
After the commit, the process switch looks like:
schedule (prev, next)
- schedule out all perf events for prev
- schedule in all perf events for (next)
- switch to next
The problem is, that after we schedule perf events in, the pmu
is enabled and we can receive events even before we make the
switch to next - so "current" still being prev process (event
SAMPLE data are filled based on the value of the "current"
process).
Thats exactly what we see for test__PERF_RECORD test. We receive
SAMPLES with PID of the process that our tracee is scheduled
from.
Discussed with Peter Zijlstra:
> Bah!, yeah I guess reverting is the right thing for now. Sad
> though.
>
> So by having the two hooks we have a black-spot between them
> where we receive no events at all, this black-spot covers the
> hand-over of current and we thus don't receive the 'wrong'
> events.
>
> I rather liked we could do away with both that black-spot and
> clean up the code a little, but apparently people rely on it.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
Cc: paulus@samba.org
Cc: cjashfor@linux.vnet.ibm.com
Cc: fweisbec@gmail.com
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20120523111302.GC1638@m.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
we start a infinite loop when user gives ./watchdog-test, and when user
ctrl + c's the program, we just exit immeadiately with out closing the
filedescriptor of the watchdog device. a signal handler is used to
do the job of closing the filedescriptor and exiting the program.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
in the watchdog test code, the ioctl is performed on the watchdog device
and just doing exit(0) so we leak a filedescripor.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
While rebasing my "watchdog_dev: Let the driver update the timeout field on
set_timeout success" patch (before I noticed it was already picked up by Wim),
I noticed that the s3c2410_wdt driver may not always have a 1 second
resolution, this patch changes s3c2410wdt_set_heartbeat to update the
timeout to the actually achieved timeout.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Use the more modern API.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
via_wdt is a PCI driver so it should depend on PCI so that
it will not cause build errors.
drivers/watchdog/via_wdt.c:256:1: warning: data definition has no type or storage class
drivers/watchdog/via_wdt.c:256:1: warning: type defaults to 'int' in declaration of 'module_pci_driver'
drivers/watchdog/via_wdt.c:256:1: warning: parameter names (without types) in function declaration
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Fix build error by including <linux/io.h>:
drivers/watchdog/ie6xx_wdt.c:97:2: error: implicit declaration of function 'outb'
drivers/watchdog/ie6xx_wdt.c:133:2: error: implicit declaration of function 'outl'
drivers/watchdog/ie6xx_wdt.c:161:2: error: implicit declaration of function 'inb'
drivers/watchdog/ie6xx_wdt.c:199:3: error: implicit declaration of function 'inl'
drivers/watchdog/ie6xx_wdt.c:203:3: error: implicit declaration of function 'inw'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Fix printk format warning; use cast to u64 since resource_size_t can
be either u32 or u64.
drivers/watchdog/ie6xx_wdt.c:261:4: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Add driver for the watchdog timer built into the
Intel Atom E6XX (TunnelCreek) processor.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
This works the same way IT8721F works, but it supports WDT_PWROK
(checked on the datasheet).
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
i6300esb is on of the watchdogs QEMU can emulate. It is also available
when emulating ARM. The driver works without problems and is quite
useful to test userspace dealing with /dev/watchdog.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
This patch converts the PCI watchdog drivers so that they use the
module_pci_driver() macro. This makes the code smaller and simpler.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Thomas Mingarelli <thomas.mingarelli@hp.com>
Cc: Marc Vertes <marc.vertes@sigfox.com>
|
|
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The SCH311x chip contains 2 watchdogs. One is the watchdog programmable
by the runtime register at address 0x65-0x68, the other is the watchdog
inside the power on reset generator. This second watchdog has a fixed
timeout value of ~1.6 seconds and is configurable only by the RESGEN
register.
The BIOS normally takes care of the RESGEN watchdog and disables it (at
least) before the OS is booted.
Unfortunately the sch311x_wdt driver clears bit 0 of the RESGEN register
which has the effect that at the latest 1.6 seconds later, a POR is
triggered.
The attached patch fixes this problem by completely removing any
reference to the RESGEN watchdog from the sch311x_wdt driver.
Signed-off-by: Dave Mueller <d.mueller@elsoft.ch>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Use of_match_ptr definition for the of_match_table.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
|
|
This patch adds device tree support to pnx4008-wdt.c
Signed-off-by: Roland Stigge <stigge@antcom.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Combine request_region and ioremap into devm_request_and_ioremap. This has
the effect of fixing a missing iounmap on the failure of clk_get.
This also introduces a call to clk_put and clears the vbus_clk variable in
the case of failure or device removal.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
The platform is removed, so there are no users of this driver.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Pointers should not be compared to plain integers.
Quiets the sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
The check:
if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr))
may not work if there's an overflow in the right-hand side of the condition.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
If the kernel build process is creating files automatically, the least
it can do is create them in a properly formatted manner. Sure, it's a
minor issue, but being consistent is nice.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
In case the open() call succeeds but the subsequent fstat() call
fails, then we'll return without close()'ing the filedescriptor.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Ensure that we can't get randconfig breakage by doing the IRQ_DOMAIN
select automatically. Don't just do the select from REGMAP_IRQ to ensure
that the select actually gets noticed.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
|
|
Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99
(mm: retry page fault when blocking on disk transfer) and
commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb
(x86,mm: make pagefault killable)
The above commits introduced changes into the x86 pagefault handler
for making the page fault handler retryable as well as killable.
These changes reduce the mmap_sem hold time, which is crucial
during OOM killer invocation.
Port these changes to hexagon.
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
|
|
This function is only used in the same file, and the other similar
functions in this file are also static.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
[rkuo@codeaurora.org: adjusted patch to apply to latest]
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
|
|
"make versioncheck" points out that arch/hexagon/include/asm/spinlock_types.h
does not need to include version.h .
A quick look at the file seems to confirm its findings, so here's a patch that
removes the include.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
|
|
Use resource_size function on resource object
instead of explicit computation.
The semantic patch that makes this change is available
in scripts/coccinelle/api/resource_size.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
|
|
Add PATA host controller driver for ep93xx.
Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl>
Cc: Joao Ramos <joao.ramos@inov.pt>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
A user has several systems with a couple of models of flash disks with IDE
connectors. These disks work fine in 2.6.18-ish kernels but corrupt data on
new kernels.
The difference appears to be with the default I/O method used by the IDE
controller driver between the kernels. In the older kernels, the
configuration is very conservative and the driver stays in PIO mode. With
new kernels, the ata driver (pata_serverworks) attempts to use UDMA/66
which the drive claims to support. This mode, however, does not appear to
work in DMA mode. The drive does work correctly and no corruption is
seen if the kernel parameter "libata.force=5:pio0,6:pio0" is used to force
the driver to use PIO instead of DMA mode.
Blacklist these drives. Unfortunately the model name of the drive is very
generic, " 2GB ATA Flash Disk", but the revision is specific, "ADMA428M".
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
When ata_generic_ide=1 is set don't do the is_intel_ider() magic
check. We found at least one box who needed that.
Cc: alan@linux.intel.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
Commit 4d7e30d (epoll: Add a flag, EPOLLWAKEUP, to prevent
suspend while epoll events are ready) caused some applications to
malfunction, because they set the bit corresponding to the new
EPOLLWAKEUP flag in their eventpoll flags and they don't have the
new CAP_EPOLLWAKEUP capability.
To prevent that from happening, change epoll_ctl() to clear
EPOLLWAKEUP in epds.events if the caller doesn't have the
CAP_EPOLLWAKEUP capability instead of failing and returning an
error code, which allows the affected applications to function
normally.
Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
There was no easy way to see the frequency used, and with the change of
default, we better provide one.
[root@sandy linux]# perf evlist -F
cycles: sample_freq=4000
[root@sandy linux]# perf evlist -v
cycles: sample_freq=4000, size: 80, sample_type: 391, read_format: 7, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
[root@sandy linux]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e1p9poez3nwrgycbmwqmhlsu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Quoting Ingo:
"While at it I'd also suggest increasing the default sampling frequency,
from 1000 Hz per CPU to at least 4Khz auto-freq or so - this should work
well all across the board I think. CPUs are getting faster and command/app
run times are getting shorter, 1Khz is a bit low IMO."
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2jafa6mkrufyekny9ei59lpu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In order for perf buildid-list to work with pipe-mode files, it needs to
process buildids and event attr structs.
$ perf record -o - noploop 2 | ./perf inject -b | perf buildid-list -i - -H
noploop for 2 seconds
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.084 MB - (~3678 samples) ]
0000000000000000000000000000000000000000 [kernel.kallsyms]
3a0d0629efe74a8da3eeba372cdbd74ad9b8f5d5 /usr/local/bin/noploop
The reason [kernel.kallsyms] shows a 0 build-id comes from the
way buildids are injected in the stream.
The buildid for the kernel is provided by a BUILD_ID record. The
[kernel.kallsyms] is provided by a MMAP record. There is no clean and
obvious way to link the two, unfortunately.
In regular mode, the kernel buildid is generated from reading the ELF
image or kallsyms and perf knows to associate [kernel.kallsyms] to it.
Later on, when perf processes the [kernel.kallsyms] MMAP record, it will
already have a dso for it.
So for now, make sure perf buildid-list shows the buildids for
everything but the kernel image.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-6-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In __perf_session__process_pipe_events(), there was a risk we would read
more than what a union perf_event struct can hold. this could happen in
case, perf is reading a file which contains new record types it does not
know about and which are larger than anything it knows about.
In general, perf is supposed to skip records it does not understand, but
in pipe mode, those have to be read and ignored. The fixed size header
contains the size of the record, but that size may be larger than union
perf_event, yet it was used as the backing to the read in:
union perf_event event;
void *p;
size = event->header.size;
p = &event;
p += sizeof(struct perf_event_header);
if (size - sizeof(struct perf_event_header)) {
err = readn(self->fd, p, size - sizeof(struct perf_event_header));
We fix this by allocating a buffer based on the size reported in the
header. We reuse the buffer as much as we can. We realloc in case it
becomes too small. In the common case, the performance impact is
negligible.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf inject -b was broken. It would not inject any build_id into the
stream. Furthermore, it would strip samples from the stream.
The reason was a missing initialization of the event attribute
structure. The perf_tool.tool.attr() callback was pointing to a simple
repipe. But there was no initialization of the internal data structures
to keep track of events and event ids. That later caused event id
lookups to fail, and sample would get removed.
The patch simply adds back the call to perf_event__process_attr() to
initialize the evlist structure and now build_ids are again injected.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To match the PERF_RECORD_HEADER_TRACING_DATA record type.
This is the same info as the one used for pipe mode whereas the other
one is for regular file output. This will help in the later patch to add
meta-data infos in pipe mode.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-4-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following union:
union {
u64 val64;
u32 val32[2];
} u;
is used on more than one place in perf code and will be used more in
upcomming patches.
Adding union u64_swap to have it defined globaly so we dont need to
redefine it all the time.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the perf data file is read cross architectures, the
perf_event__attr_swap function takes care about endianness of all the
struct fields except the bitfield flags.
The bitfield flags need to be transformed as well, since the bitfield
binary storage differs for both endians.
ABI says:
Bit-fields are allocated from right to left (least to most significant)
on little-endian implementations and from left to right (most to least
significant) on big-endian implementations.
The above seems to be byte specific, so we need to reverse each byte of
the bitfield. 'Internet' also says this might be implementation specific
and we probably need proper fix and carry perf_event_attr bitfield flags
in separate data file FEAT_ section. Thought this seems to work for now.
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 2)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/4FB60C7A.2080508@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add PERF_SAMPLE_CPU flag into attr->sample_type if an user specified any
of cpu target (either system-wide or cpu list).
It will show correct values when cpu sort key is given for perf top and
perf report.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337564527-9367-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Although perf depends on the libtraceevent, it cannot know when it needs
to be rebuilt. So just try to rebuild it always in order to make sure we
use the latest version.
While at it, silence annoying directory change messages.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1337677434-4881-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Change some variable names according to new library name.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1337677434-4881-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While migrating to the libtraceevent, the perl scripting engine
missed this structure rename.
This fixes:
util/scripting-engines/trace-event-perl.c: In function "find_cache_event":
util/scripting-engines/trace-event-perl.c:244: error: assignment from incompatible pointer type
util/scripting-engines/trace-event-perl.c:248: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:248: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:250: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c: In function "perl_process_tracepoint":
util/scripting-engines/trace-event-perl.c:286: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:286: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:307: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c: In function "perl_generate_script":
util/scripting-engines/trace-event-perl.c:498: error: passing argument 1 of "trace_find_next_event" from incompatible pointer type
util/scripting-engines/../trace-event.h:56: note: expected "struct event_format *" but argument is of type "struct event *"
util/scripting-engines/trace-event-perl.c:498: error: assignment from incompatible pointer type
util/scripting-engines/trace-event-perl.c:499: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:499: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:513: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:532: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:556: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:569: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:570: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:579: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:580: error: dereferencing pointer to incomplete type
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/1337697049-30251-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Handle the print argument types brought by the new libparsevent in perl
scripting engine.
PRINT_BSTRING and PRINT_DYNAMIC_ARRAY are treated just like strings
and thus don't require specific processing.
But PRINT_FUNC need specific plugins which are not yet handled, lets
warn if we meet this case.
This fixes:
util/scripting-engines/trace-event-perl.c: In function define_event_symbol:
util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_BSTRING not handled in switch
util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_DYNAMIC_ARRAY not handled in switch
util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_FUNC not handled in switch
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/1337697049-30251-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding a new hardcoded term 'name' allowing to specify a name for the
pmu event. The term is defined along with standard pmu terms. If no
'name' term is given, the event name follows following template:
"raw 0x<perf_event_attr::config>"
running:
perf stat -e cpu/config=1,name=krava1/u ls
will produce following output:
...
Performance counter stats for 'ls':
0 krava1
...
running:
perf stat -e cpu/config=1/u ls
will produce following output:
...
Performance counter stats for 'ls':
0 raw 0x1
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Separating 'mem:' scanner processing, so we can parse out modifier
specifically and dont clash with other rules.
This is just precaution for the future, so we dont need to worry about
the rules clashing where we need to parse out any sub-rule of global
rules.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|