aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/irq/chip.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-09-04Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+109
Pull irq updates from Thomas Gleixner: "The interrupt subsystem delivers this time: - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support - Initial GIC-V4 support - Consolidation of the FSL MSI support - Utilize the effective affinity interface in various ARM irqchip drivers - Yet another interrupt chip driver (UniPhier AIDET) - Bulk conversion of the irq chip driver to use %pOF - The usual small fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) irqchip/ls-scfg-msi: Add MSI affinity support irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support irqchip/ls-scfg-msi: Add LS1046a MSI support arm64: dts: ls1046a: Add MSI dts node arm64: dts: ls1043a: Share all MSIs arm: dts: ls1021a: Share all MSIs arm64: dts: ls1043a: Fix typo of MSI compatible string arm: dts: ls1021a: Fix typo of MSI compatible string irqchip/ls-scfg-msi: Fix typo of MSI compatible strings irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask irqchip/mmp: Make mmp_intc_conf const irqchip/gic: Make irq_chip const irqchip/gic-v3: Advertise GICv4 support to KVM irqchip/gic-v4: Enable low-level GICv4 operations irqchip/gic-v4: Add some basic documentation irqchip/gic-v4: Add VLPI configuration interface irqchip/gic-v4: Add VPE command interface irqchip/gic-v4: Add per-VM VPE domain creation irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared ...
2017-08-18genirq: Restore trigger settings in irq_modify_status()Marc Zyngier1-2/+8
irq_modify_status starts by clearing the trigger settings from irq_data before applying the new settings, but doesn't restore them, leaving them to IRQ_TYPE_NONE. That's pretty confusing to the potential request_irq() that could follow. Instead, snapshot the settings before clearing them, and restore them if the irq_modify_status() invocation was not changing the trigger. Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ") Reported-and-tested-by: jeffy <jeffy.chen@rock-chips.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170818095345.12378-1-marc.zyngier@arm.com
2017-08-18genirq: Add handle_fasteoi_{level,edge}_irq flow handlersDavid Daney1-0/+106
Follow-on patch for gpio-thunderx uses a irqdomain hierarchy which requires slightly different flow handlers, add them to chip.c which contains most of the other flow handlers. Make these conditionally compiled based on CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/1503017616-3252-3-git-send-email-david.daney@cavium.com
2017-08-18genirq: Export more irq_chip_*_parent() functionsDavid Daney1-0/+3
Many of the family of functions including irq_chip_mask_parent(), irq_chip_unmask_parent() are exported, but not all. Add EXPORT_SYMBOL_GPL to irq_chip_enable_parent, irq_chip_disable_parent and irq_chip_set_affinity_parent, so they likewise are usable from modules. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/1503017616-3252-2-git-send-email-david.daney@cavium.com
2017-07-17genirq/PM: Properly pretend disabled state when force resuming interruptsJuergen Gross1-10/+0
Interrupts with the IRQF_FORCE_RESUME flag set have also the IRQF_NO_SUSPEND flag set. They are not disabled in the suspend path, but must be forcefully resumed. That's used by XEN to keep IPIs enabled beyond the suspension of device irqs. Force resume works by pretending that the interrupt was disabled and then calling __irq_enable(). Incrementing the disabled depth counter was enough to do that, but with the recent changes which use state flags to avoid unnecessary hardware access, this is not longer sufficient. If the state flags are not set, then the hardware callbacks are not invoked and the interrupt line stays disabled in "hardware". Set the disabled and masked state when pretending that an interrupt got disabled by suspend. Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Link: http://lkml.kernel.org/r/20170717174703.4603-2-jgross@suse.com
2017-07-09Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+1
Pull irq fixes from Thomas Gleixner: - A few fixes mopping up the fallout of the big irq overhaul - Move the interrupt resource management logic out of the spin locked, irq disabled region to avoid unnecessary restrictions of the resource callbacks - Preparation for reworking the per cpu irq request function. * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Allow ACPI device nodes to be used as irqdomain identifiers genirq/debugfs: Remove redundant NULL pointer check genirq: Allow to pass the IRQF_TIMER flag with percpu irq request genirq/timings: Move free timings out of spinlocked region genirq: Move irq resource handling out of spinlocked region genirq: Add mutex to irq desc to serialize request/free_irq() genirq: Move bus locking into __setup_irq() genirq: Force inlining of __irq_startup_managed to prevent build failure genirq/debugfs: Fix build for !CONFIG_IRQ_DOMAIN
2017-07-04genirq: Force inlining of __irq_startup_managed to prevent build failureGeert Uytterhoeven1-1/+1
If CONFIG_SMP=n, and gcc (e.g. 4.1.2) decides not to inline __irq_startup_managed(), the build fails with: kernel/built-in.o: In function `irq_startup': (.text+0x38ed8): undefined reference to `irq_set_affinity_locked' Fix this by forcing inlining of __irq_startup_managed(). Fixes: 761ea388e8c4e3ac ("genirq: Handle managed irqs gracefully in irq_startup()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1499162761-12398-1-git-send-email-geert@linux-m68k.org
2017-07-03Merge tag 'docs-4.13' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "There has been a fair amount of activity in the docs tree this time around. Highlights include: - Conversion of a bunch of security documentation into RST - The conversion of the remaining DocBook templates by The Amazing Mauro Machine. We can now drop the entire DocBook build chain. - The usual collection of fixes and minor updates" * tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits) scripts/kernel-doc: handle DECLARE_HASHTABLE Documentation: atomic_ops.txt is core-api/atomic_ops.rst Docs: clean up some DocBook loose ends Make the main documentation title less Geocities Docs: Use kernel-figure in vidioc-g-selection.rst Docs: fix table problems in ras.rst Docs: Fix breakage with Sphinx 1.5 and upper Docs: Include the Latex "ifthen" package doc/kokr/howto: Only send regression fixes after -rc1 docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters doc: Document suitability of IBM Verse for kernel development Doc: fix a markup error in coding-style.rst docs: driver-api: i2c: remove some outdated information Documentation: DMA API: fix a typo in a function name Docs: Insert missing space to separate link from text doc/ko_KR/memory-barriers: Update control-dependencies example Documentation, kbuild: fix typo "minimun" -> "minimum" docs: Fix some formatting issues in request-key.rst doc: ReSTify keys-trusted-encrypted.txt doc: ReSTify keys-request-key.txt ...
2017-06-26genirq: Avoid unnecessary low level irq function callsJeffy Chen1-20/+33
Check irq state in enable/disable/unmask/mask_irq to avoid unnecessary low level irq function calls. This has two advantages: - Conditionals are faster than hardware access - Solves issues with the underlying refcounting of the pinctrl infrastructure Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: tfiga@chromium.org Cc: briannorris@chromium.org Cc: dianders@chromium.org Link: http://lkml.kernel.org/r/1498476814-12563-2-git-send-email-jeffy.chen@rock-chips.com
2017-06-22genirq: Handle managed irqs gracefully in irq_startup()Thomas Gleixner1-3/+61
Affinity managed interrupts should keep their assigned affinity accross CPU hotplug. To avoid magic hackery in device drivers, the core code shall manage them transparently and set these interrupts into a managed shutdown state when the last CPU of the assigned affinity mask goes offline. The interrupt will be restarted when one of the CPUs in the assigned affinity mask comes back online. Add the necessary logic to irq_startup(). If an interrupt is requested and started up, the code checks whether it is affinity managed and if so, it checks whether a CPU in the interrupts affinity mask is online. If not, it puts the interrupt into managed shutdown state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235447.189851170@linutronix.de
2017-06-22genirq: Add force argument to irq_startup()Thomas Gleixner1-2/+2
In order to handle managed interrupts gracefully on irq_startup() so they won't lose their assigned affinity, it's necessary to allow startups which keep the interrupts in managed shutdown state, if none of the assigend CPUs is online. This allows drivers to request interrupts w/o the CPUs being online, which avoid online/offline churn in drivers. Add a force argument which can override that decision and let only request_irq() and enable_irq() allow the managed shutdown handling. enable_irq() is required, because the interrupt might be requested with IRQF_NOAUTOEN and enable_irq() invokes irq_startup() which would then wreckage the assignment again. All other callers force startup and potentially break the assigned affinity. No functional change as this only adds the function argument. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235447.112094565@linutronix.de
2017-06-22genirq: Split out irq_startup() codeThomas Gleixner1-11/+18
Split out the inner workings of irq_startup() so it can be reused to handle managed interrupts gracefully. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235447.033235144@linutronix.de
2017-06-22genirq: Move initial affinity setup to irq_startup()Thomas Gleixner1-0/+2
The startup vs. setaffinity ordering of interrupts depends on the IRQF_NOAUTOEN flag. Chained interrupts are not getting any affinity assignment at all. A regular interrupt is started up and then the affinity is set. A IRQF_NOAUTOEN marked interrupt is not started up, but the affinity is set nevertheless. Move the affinity setup to startup_irq() so the ordering is always the same and chained interrupts get the proper default affinity assigned as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235445.020534783@linutronix.de
2017-06-04genirq: Warn when IRQ_NOAUTOEN is used with shared interruptsThomas Gleixner1-0/+7
Shared interrupts do not go well with disabling auto enable: 1) The sharing interrupt might request it while it's still disabled and then wait for interrupts forever. 2) The interrupt might have been requested by the driver sharing the line before IRQ_NOAUTOEN has been set. So the driver which expects that disabled state after calling request_irq() will not get what it wants. Even worse, when it calls enable_irq() later, it will trigger the unbalanced enable_irq() warning. Reported-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: dianders@chromium.org Cc: jeffy <jeffy.chen@rock-chips.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: tfiga@chromium.org Link: http://lkml.kernel.org/r/20170531100212.210682135@linutronix.de
2017-06-04genirq: Handle NOAUTOEN interrupt setup properThomas Gleixner1-22/+54
If an interrupt is marked NOAUTOEN then request_irq() installs the action, but does not enable the interrupt via startup_irq(). The interrupt is enabled via enable_irq() later from the driver. enable_irq() calls irq_enable(). That means that for interrupts which have a irq_startup() callback this callback is never invoked. Neither is irq_domain_activate_irq() invoked for such interrupts. If an interrupt depends on irq_startup() or irq_domain_activate_irq() then the enable via irq_enable() is not enough. Add a status flag IRQD_IRQ_STARTED_UP and use this to select the proper mechanism in enable_irq(). Use the flag also to avoid pointless calls into the low level functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: dianders@chromium.org Cc: jeffy <jeffy.chen@rock-chips.com> Cc: Brian Norris <briannorris@chromium.org> Cc: tfiga@chromium.org Link: http://lkml.kernel.org/r/20170531100212.130986205@linutronix.de
2017-05-16genirq: Fix chained interrupt data orderingThomas Gleixner1-1/+1
irq_set_chained_handler_and_data() sets up the chained interrupt and then stores the handler data. That's racy against an immediate interrupt which gets handled before the store of the handler data happened. The handler will dereference a NULL pointer and crash. Cure it by storing handler data before installing the chained handler. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2017-05-16irq: update genericirq book locationMauro Carvalho Chehab1-1/+1
This book got converted from DocBook. Update its references to point to the current location. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-11genirq: Add support for nested shared IRQsCharles Keepax1-1/+4
On a specific audio system an interrupt input of an audio CODEC is used as a shared interrupt. That interrupt input is handled by a CODEC specific irq chip driver and triggers a CPU interrupt via the CODEC irq output line. The CODEC interrupt handler demultiplexes the CODEC interrupt inputs and the interrupt handlers for these demultiplexed inputs run nested in the context of the CODEC interrupt handler. The demultiplexed interrupts use handle_nested_irq() as their interrupt handler, which unfortunately has no support for shared interrupts. So the above hardware cannot be supported. Add shared interrupt support to handle_nested_irq() by iterating over the interrupt action chain. [ tglx: Massaged changelog ] Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: patches@opensource.wolfsonmicro.com Link: http://lkml.kernel.org/r/1488904098-5350-1-git-send-email-ckeepax@opensource.wolfsonmicro.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-25genirq: Make function __irq_do_set_handler() staticWei Yongjun1-1/+1
Fixes the following sparse warning: kernel/irq/chip.c:786:1: warning: symbol '__irq_do_set_handler' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: http://lkml.kernel.org/r/1474817799-18676-1-git-send-email-weiyj.lk@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-20Merge branch 'irq/urgent' into irq/coreThomas Gleixner1-2/+6
Merge urgent fixes so pending patches for 4.9 can be applied.
2016-09-19genirq: Skip chained interrupt trigger setup if type is IRQ_TYPE_NONEMarc Zyngier1-2/+6
There is no point in trying to configure the trigger of a chained interrupt if no trigger information has been configured. At best this is ignored, and at the worse this confuses the underlying irqchip (which is likely not to handle such a thing), and unnecessarily alarms the user. Only apply the configuration if type is not IRQ_TYPE_NONE. Fixes: 1e12c4a9393b ("genirq: Correctly configure the trigger on chained interrupts") Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/CAMuHMdVW1eTn20=EtYcJ8hkVwohaSuH_yQXrY2MGBEvZ8fpFOg@mail.gmail.com Link: http://lkml.kernel.org/r/1474274967-15984-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14Merge tag 'irqchip-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/coreThomas Gleixner1-0/+11
Merge the first drop of irqchip updates for 4.9 from Marc Zyngier: - ACPI IORT core code - IORT support for the GICv3 ITS - A few of GIC cleanups
2016-09-06genirq: No need to mask non trigger mode flags before __irq_set_trigger()Alexander Kuleshov1-1/+0
Some callers of __irq_set_trigger() masks all flags except trigger mode flags. This is unnecessary, ase __irq_set_trigger() already does this before usage of flags. [ tglx: Moved the flag mask and adjusted comment. Removed the hunk in enable_percpu_irq() as it is required there ] Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Link: http://lkml.kernel.org/r/20160719095408.13778-1-kuleshovmail@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-02genirq: Robustify handle_percpu_devid_irq()Thomas Gleixner1-4/+14
The percpu_devid handler is not robust against spurious interrupts. If a spurious interrupt happens and no action is installed then the handler crashes with a NULL pointer dereference. Add a sanity check for this and log the wreckage once in dmesg. Reported-by: Majun <majun258@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: guohanjun@huawei.com Cc: dingtianhong@huawei.com Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1609021436160.5647@nanos
2016-08-17genirq: Correctly configure the trigger on chained interruptsMarc Zyngier1-0/+11
Commit 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ") moved the trigger configuration call from the irqdomain mapping to the interrupt being actually requested. This patch failed to handle the case where we configure a chained interrupt, which doesn't get requested through the usual path. In order to solve this, let's call __irq_set_trigger just before starting the cascade interrupt. Special care must be taken to make the flow handler stick, as the .irq_set_type method could have reset it (it doesn't know we're dealing with a chained interrupt). Based on an initial patch by Jon Hunter. Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ") Reported-by: John Stultz <john.stultz@linaro.org> Reported-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-18genirq: Add untracked irq handlerKeith Busch1-0/+43
This adds a software irq handler for controllers that multiplex interrupts from multiple devices, but don't know which device generated the interrupt. For these devices, the irq handler that demuxes must check every action for every software irq using the same h/w irq in order to find out which device generated the interrupt. This will inevitably trigger spurious interrupt detection if we are noting the irq. The new irq handler does not track the handling for spurious interrupt detection. An irq that uses this also won't get stats tracked since it didn't generate the interrupt, nor added to randomness since they are not random. Signed-off-by: Keith Busch <keith.busch@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: Jon Derrick <jonathan.derrick@intel.com> Link: http://lkml.kernel.org/r/1466200821-29159-1-git-send-email-keith.busch@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-13genirq: Add runtime power management support for IRQ chipsJon Hunter1-0/+40
Some IRQ chips may be located in a power domain outside of the CPU subsystem and hence will require device specific runtime power management. In order to support such IRQ chips, add a pointer for a device structure to the irq_chip structure, and if this pointer is populated by the IRQ chip driver and CONFIG_PM is selected in the kernel configuration, then the pm_runtime_get/put APIs for this chip will be called when an IRQ is requested/freed, respectively. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-10genirq: Export IRQ functions for module useQuan Nguyen1-0/+4
Export irq_chip_*_parent(), irq_domain_create_hierarchy(), irq_domain_set_hwirq_and_chip(), irq_domain_reset_irq_data(), irq_domain_alloc/free_irqs_parent() So gpio drivers can be built as modules. First user: gpio-xgene-sb Signed-off-by: Quan Nguyen <qnguyen@apm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Phong Vo <pvo@apm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: patches@apm.com Cc: Loc Ho <lho@apm.com> Cc: Keyur Chudgar <kchudgar@apm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: https://lists.01.org/pipermail/kbuild-all/2016-February/017914.html Link: http://lkml.kernel.org/r/1457017012-10628-1-git-send-email-qnguyen@apm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-20genirq/msi: Export functions to allow MSI domains in modulesJake Oshins1-0/+1
The Linux kernel already has the concept of IRQ domain, wherein a component can expose a set of IRQs which are managed by a particular interrupt controller chip or other subsystem. The PCI driver exposes the notion of an IRQ domain for Message-Signaled Interrupts (MSI) from PCI Express devices. This patch exposes the functions which are necessary for creating a MSI IRQ domain within a module. [ tglx: Split it into x86 and core irq parts ] Signed-off-by: Jake Oshins <jakeo@microsoft.com> Cc: gregkh@linuxfoundation.org Cc: kys@microsoft.com Cc: devel@linuxdriverproject.org Cc: olaf@aepfle.de Cc: apw@canonical.com Cc: vkuznets@redhat.com Cc: haiyangz@microsoft.com Cc: marc.zyngier@arm.com Cc: bhelgaas@google.com Link: http://lkml.kernel.org/r/1449769983-12948-4-git-send-email-jakeo@microsoft.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-16genirq: Delay incrementing interrupt count if it's disabled/pendingSudeep Holla1-4/+4
In case of a wakeup interrupt, irq_pm_check_wakeup disables the interrupt and marks it pending and suspended, disables it and notifies the pm core about the wake event. The interrupt gets handled later once the system is resumed. However the irq stats is updated twice: once when it's disabled waiting for the system to resume and later when it's handled, resulting in wrong counting of the wakeup interrupt when waking up the system. This patch updates the interrupt count so that it's updated only when the interrupt gets handled. It's already handled correctly in handle_edge_irq and handle_edge_eoi_irq. Reported-by: Manoil Claudiu <claudiu.manoil@freescale.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1446661957-1019-1-git-send-email-sudeep.holla@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-11genirq: Add flag to force mask in disable_irq[_nosync]()Thomas Gleixner1-0/+9
If an irq chip does not implement the irq_disable callback, then we use a lazy approach for disabling the interrupt. That means that the interrupt is marked disabled, but the interrupt line is not immediately masked in the interrupt chip. It only becomes masked if the interrupt is raised while it's marked disabled. We use this to avoid possibly expensive mask/unmask operations for common case operations. Unfortunately there are devices which do not allow the interrupt to be disabled easily at the device level. They are forced to use disable_irq_nosync(). This can result in taking each interrupt twice. Instead of enforcing the non lazy mode on all interrupts of a irq chip, provide a settings flag, which can be set by the driver for that particular interrupt line. Reported-and-tested-by: Duc Dang <dhdang@apm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1510092348370.6097@nanos
2015-10-09genirq: Allow migration of chained interrupts by installing default actionMika Westerberg1-0/+17
When a CPU is offlined all interrupts that have an action are migrated to other still online CPUs. However, if the interrupt has chained handler installed this is not done. Chained handlers are used by GPIO drivers which support interrupts, for instance. When the affinity is not corrected properly we end up in situation where most interrupts are not arriving to the online CPUs anymore. For example on Intel Braswell system which has SD-card card detection signal connected to a GPIO the IO-APIC routing entries look like below after CPU1 is offlined: pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1) pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1) pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1) pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1) The problem here is that the destination mask still contains both CPUs even if CPU1 is already offline. This means that the IO-APIC still routes interrupts to the other CPU as well. We solve the problem by providing a default action for chained interrupts. This action allows the migration code to correct affinity (as it finds desc->action != NULL). Also make the default action handler to emit a warning if for some reason a chained handler ends up calling it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22genirq: Remove the second parameter from handle_irq_event_percpu()Huang Shijie1-1/+1
Actually, we always use the first irq action of the @desc->action chain, so remove the second parameter from handle_irq_event_percpu() which makes the code more tidy. Signed-off-by: Huang Shijie <shijie.huang@arm.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: peterz@infradead.org Cc: marc.zyngier@arm.com Link: http://lkml.kernel.org/r/1441160695-19809-1-git-send-email-shijie.huang@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-19/+8
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16genirq: Move field 'msi_desc' from irq_data into irq_common_dataJiang Liu1-1/+1
MSI descriptors are per-irq instead of per irqchip, so move it into struct irq_common_data. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-35-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16genirq: Move field 'handler_data' from irq_data into irq_common_dataJiang Liu1-2/+2
Handler data (handler_data) is per-irq instead of per irqchip, so move it into struct irq_common_data. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-13-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-01Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-12/+12
Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-08-20genirq: Introduce irq_chip_set_type_parent() helperGrygorii Strashko1-0/+17
This helper is required for irq chips which do not implement a irq_set_type callback and need to call down the irq domain hierarchy for the actual trigger type change. This helper is required to fix further wreckage caused by the conversion of TI OMAP to hierarchical irq domains and therefor tagged for stable. [ tglx: Massaged changelog ] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Cc: <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchyGrygorii Strashko1-1/+1
irq_chip_retrigger_hierarchy() returns -ENOSYS if it was not able to find at least one .irq_retrigger() callback implemented in the IRQ domain hierarchy. That's wrong, because check_irq_resend() expects a 0 return value from the callback in case that the hardware assisted resend was not possible. If the return value is non zero the core code assumes hardware resend success and the software resend is not invoked. This results in lost interrupts on platforms where none of the parent irq chips in the hierarchy implements the retrigger callback. This is observable on TI OMAP, where the hierarchy is: ARM GIC <- OMAP wakeupgen <- TI Crossbar Return 0 instead so the software resend mechanism gets invoked. [ tglx: Massaged changelog ] Fixes: 85f08c17de26 ('genirq: Introduce helper functions...') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-2-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30genirq: Use the proper parameter name in kernel docMasanari Iida1-1/+1
The following warning is emitted for make xmldocs: Warning(.//kernel/irq/chip.c:1009): No description found for parameter 'vcpu_info' Warning(.//kernel/irq/chip.c:1009): Excess function parameter 'dest' description in 'irq_chip_set_vcpu_affinity_parent' Signed-off-by: Masanari Iida <standby24x7@gmail.com> Link: http://lkml.kernel.org/r/1438164576-5945-1-git-send-email-standby24x7@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-11genirq: Remove the irq argument from note_interrupt()Jiang Liu1-1/+1
Only required for the slow path. Retrieve it from irq descriptor if necessary. [ tglx: Split out from combo patch. Left [try_]misrouted_irq() untouched as there is no win in the slow path ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1433391238-19471-19-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-11genirq: Remove irq arg from __irq_set_trigger()Jiang Liu1-1/+1
It's only required for debug output and can be retrieved from the irq descriptor if necessary. [ tglx: Split out from combo patch ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-11genirq: Remove the irq argument from check_irq_resend()Jiang Liu1-1/+1
It's only used in the software resend case and can be retrieved from irq_desc if necessary. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1433391238-19471-18-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-11genirq: Remove the parameter 'irq' of kstat_incr_irqs_this_cpu()Jiang Liu1-8/+8
The first parameter 'irq' is never used by kstat_incr_irqs_this_cpu(). Remove it. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1433391238-19471-16-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18irq: Add irq_set_chained_handler_and_data()Russell King1-11/+34
Driver authors seem to get the ordering of irq_set_chained_handler() and irq_set_handler_data() wrong - ordering the former before the latter. This opens a race window where, if there is an interrupt pending, the handler will be called between these two calls, potentially resulting in an oops. Provide a single interface to set both of these together, especially as that's commonly what is required. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/E1Z4yzs-0002Rw-4B@rmk-PC.arm.linux.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19Merge branch 'irq/for-x86' into irq/coreThomas Gleixner1-0/+14
Pull in the branch which can be consumed by x86 to build their changes on top.
2015-05-19genirq: Introduce irq_set_vcpu_affinity() to target an interrupt to a VCPUJiang Liu1-0/+14
With Posted-Interrupts support in Intel CPU and IOMMU, an external interrupt from assigned-devices could be directly delivered to a virtual CPU in a virtual machine. Instead of hacking KVM and Intel IOMMU drivers, we propose a platform independent interface to target an interrupt to a specific virtual CPU in a virtual machine, or set virtual CPU affinity for an interrupt. By adopting this new interface and the hierarchy irqdomain, we could easily support posted-interrupts on Intel platforms, and also provide flexible enough interfaces for other platforms to support similar features. Here is the usage scenario for this interface: Guest update MSI/MSI-X interrupt configuration -->QEMU and KVM handle this -->KVM call this interface (passing posted interrupts descriptor and guest vector) -->irq core will transfer the control to IOMMU -->IOMMU will do the real work of updating IRTE (IRTE has new format for VT-d Posted-Interrupts) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Feng Wu <feng.wu@intel.com> Link: http://lkml.kernel.org/r/1432026437-16560-2-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-18genirq: Add irq_chip_(enable/disable)_parentStefan Agner1-0/+28
Add helper irq_chip_enable_parent and irq_chip_disable_parent. The helper implement the default behavior in case irq_enable or irq_disable is not implemented for the parent interrupt chip, which is calling the irq_mask or irq_unmask respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: marc.zyngier@arm.com Cc: linux@arm.linux.org.uk Cc: u.kleine-koenig@pengutronix.de Cc: olof@lixom.net Cc: arnd@arndb.de Cc: daniel.lezcano@linaro.org Cc: mark.rutland@arm.com Cc: pawel.moll@arm.com Cc: robh+dt@kernel.org Cc: ijc+devicetree@hellion.org.uk Cc: galak@codeaurora.org Cc: mcoquelin.stm32@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: shawn.guo@linaro.org Cc: kernel@pengutronix.de Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1431769465-26867-3-git-send-email-stefan@agner.ch Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-03-15genirq: Add irqchip_set_wake_parentMarc Zyngier1-0/+16
This proves to be useful with stacked domains, when the current domain doesn't implement wake-up, but expect the parent to do so. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-23genirq: Work around __irq_set_handler vs stacked domains ordering issuesMarc Zyngier1-1/+24
With the introduction of stacked domains, we have the issue that, depending on where in the stack this is called, __irq_set_handler will succeed or fail: If this is called from the inner irqchip, __irq_set_handler() will fail, as it will look at the outer domain as the (desc->irq_data.chip == &no_irq_chip) test fails (we haven't set the top level yet). This patch implements the following: "If there is at least one valid irqchip in the domain, it will probably sort itself out". This is clearly not ideal, but it is far less confusing then crashing because the top-level domain is not up yet. [ tglx: Added comment and a protection against chained interrupts in that context ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1416048553-29289-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.