aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/module.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-6/+6
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-20module: avoid setting info->name early in case we can fall back to info->mod->nameJessica Yu1-5/+4
In setup_load_info(), info->name (which contains the name of the module, mostly used for early logging purposes before the module gets set up) gets unconditionally assigned if .modinfo is missing despite the fact that there is an if (!info->name) check near the end of the function. Avoid assigning a placeholder string to info->name if .modinfo doesn't exist, so that we can fall back to info->mod->name later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-01-15modsign: print module name along with error messageJessica Yu1-1/+1
It is useful to know which module failed signature verification, so print the module name along with the error message. Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-01-08kernel/module: Fix memleak in module_add_modinfo_attrs()YueHaibing1-0/+2
In module_add_modinfo_attrs() if sysfs_create_file() fails on the first iteration of the loop (so i = 0), we forget to free the modinfo_attrs. Fixes: bc6f2a757d52 ("kernel/module: Fix mem leak in module_add_modinfo_attrs") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-12-10module: Remove accidental change of module_enable_x()Steven Rostedt (VMware)1-5/+1
When pulling in Divya Indi's patch, I made a minor fix to remove unneeded braces. I commited my fix up via "git commit -a --amend". Unfortunately, I didn't realize I had some changes I was testing in the module code, and those changes were applied to Divya's patch as well. This reverts the accidental updates to the module code. Cc: Jessica Yu <jeyu@kernel.org> Cc: Divya Indi <divya.indi@oracle.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Fixes: e585e6469d6f ("tracing: Verify if trace array exists before destroying it.") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-09modules: lockdep: Suppress suspicious RCU usage warningMasami Hiramatsu1-3/+6
While running kprobe module test, find_module_all() caused a suspicious RCU usage warning. ----- ============================= WARNING: suspicious RCU usage 5.4.0-next-20191202+ #63 Not tainted ----------------------------- kernel/module.c:619 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by rmmod/642: #0: ffffffff8227da80 (module_mutex){+.+.}, at: __x64_sys_delete_module+0x9a/0x230 stack backtrace: CPU: 0 PID: 642 Comm: rmmod Not tainted 5.4.0-next-20191202+ #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x71/0xa0 find_module_all+0xc1/0xd0 __x64_sys_delete_module+0xac/0x230 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4b6d49 ----- This is because list_for_each_entry_rcu(modules) is called without rcu_read_lock(). This is safe because the module_mutex is locked. Pass lockdep_is_held(&module_mutex) to the list_for_each_entry_rcu() to suppress this warning, This also fixes similar issue in mod_find() and each_symbol_section(). Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-11-27module: Remove set_all_modules_text_*()Peter Zijlstra1-43/+0
Now that there are no users of set_all_modules_text_*() left, remove it. While it appears nds32 uses it, it does not have STRICT_MODULE_RWX and therefore ends up with the NOP stubs. Tested-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Chen <deanbo422@gmail.com> Link: https://lkml.kernel.org/r/20191111132458.284298307@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-15kernel/module.c: wakeup processes in module_wq on module unloadKonstantin Khorenko1-0/+2
Fix the race between load and unload a kernel module. sys_delete_module() try_stop_module() mod->state = _GOING add_unformed_module() old = find_module_all() (old->state == _GOING => wait_event_interruptible()) During pre-condition finished_loading() rets 0 schedule() (never gets waken up later) free_module() mod->state = _UNFORMED list_del_rcu(&mod->list) (dels mod from "modules" list) return The race above leads to modprobe hanging forever on loading a module. Error paths on loading module call wake_up_all(&module_wq) after freeing module, so let's do the same on straight module unload. Fixes: 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for modules that have finished loading") Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-11-13tracing: Verify if trace array exists before destroying it.Divya Indi1-1/+5
A trace array can be destroyed from userspace or kernel. Verify if the trace array exists before proceeding to destroy/remove it. Link: http://lkml.kernel.org/r/1565805327-579-3-git-send-email-divya.indi@oracle.com Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com> Signed-off-by: Divya Indi <divya.indi@oracle.com> [ Removed unneeded braces ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-11-06module/ftrace: handle patchable-function-entryMark Rutland1-1/+1
When using patchable-function-entry, the compiler will record the callsites into a section named "__patchable_function_entries" rather than "__mcount_loc". Let's abstract this difference behind a new FTRACE_CALLSITE_SECTION, so that architectures don't have to handle this explicitly (e.g. with custom module linker scripts). As parisc currently handles this explicitly, it is fixed up accordingly, with its custom linker script removed. Since FTRACE_CALLSITE_SECTION is only defined when DYNAMIC_FTRACE is selected, the parisc module loading code is updated to only use the definition in that case. When DYNAMIC_FTRACE is not selected, modules shouldn't have this section, so this removes some redundant work in that case. To make sure that this is keep up-to-date for modules and the main kernel, a comment is added to vmlinux.lds.h, with the existing ifdeffery simplified for legibility. I built parisc generic-{32,64}bit_defconfig with DYNAMIC_FTRACE enabled, and verified that the section made it into the .ko files for modules. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Helge Deller <deller@gmx.de> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Torsten Duwe <duwe@suse.de> Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Tested-by: Sven Schnelle <svens@stackframe.org> Tested-by: Torsten Duwe <duwe@suse.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: linux-parisc@vger.kernel.org
2019-10-28export: avoid code duplication in include/linux/export.hMasahiro Yamada1-1/+1
include/linux/export.h has lots of code duplication between EXPORT_SYMBOL and EXPORT_SYMBOL_NS. To improve the maintainability and readability, unify the implementation. When the symbol has no namespace, pass the empty string "" to the 'ns' parameter. The drawback of this change is, it grows the code size. When the symbol has no namespace, sym->namespace was previously NULL, but it is now an empty string "". So, it increases 1 byte for every no namespace EXPORT_SYMBOL. A typical kernel configuration has 10K exported symbols, so it increases 10KB in rough estimation. I did not come up with a good idea to refactor it without increasing the code size. I am not sure how big a deal it is, but at least include/linux/export.h looks nicer. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [maennich: rebase on top of 3 fixes for the namespace feature] Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-11module: remove unneeded casts in cmp_name()Masahiro Yamada1-5/+2
You can pass opaque pointers directly. I also renamed 'va' and 'vb' into more meaningful arguments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-11module: Fix link failure due to invalid relocation on namespace offsetWill Deacon1-0/+2
Commit 8651ec01daed ("module: add support for symbol namespaces.") broke linking for arm64 defconfig: | lib/crypto/arc4.o: In function `__ksymtab_arc4_setkey': | arc4.c:(___ksymtab+arc4_setkey+0x8): undefined reference to `no symbol' | lib/crypto/arc4.o: In function `__ksymtab_arc4_crypt': | arc4.c:(___ksymtab+arc4_crypt+0x8): undefined reference to `no symbol' This is because the dummy initialisation of the 'namespace_offset' field in 'struct kernel_symbol' when using EXPORT_SYMBOL on architectures with support for PREL32 locations uses an offset from an absolute address (0) in an effort to trick 'offset_to_pointer' into behaving as a NOP, allowing non-namespaced symbols to be treated in the same way as those belonging to a namespace. Unfortunately, place-relative relocations require a symbol reference rather than an absolute value and, although x86 appears to get away with this due to placing the kernel text at the top of the address space, it almost certainly results in a runtime failure if the kernel is relocated dynamically as a result of KASLR. Rework 'namespace_offset' so that a value of 0, which cannot occur for a valid namespaced symbol, indicates that the corresponding symbol does not belong to a namespace. Cc: Matthias Maennich <maennich@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Fixes: 8651ec01daed ("module: add support for symbol namespaces.") Reported-by: kbuild test robot <lkp@intel.com> Tested-by: Matthias Maennich <maennich@google.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matthias Maennich <maennich@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTSMatthias Maennich1-2/+9
If MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is enabled (default=n), the requirement for modules to import all namespaces that are used by the module is relaxed. Enabling this option effectively allows (invalid) modules to be loaded while only a warning is emitted. Disabling this option keeps the enforcement at module loading time and loading is denied if the module's imports are not satisfactory. Reviewed-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10module: add support for symbol namespaces.Matthias Maennich1-0/+43
The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10module: support reading multiple values per modinfo tagMatthias Maennich1-2/+15
Similar to modpost's get_next_modinfo(), introduce get_next_modinfo() in kernel/module.c to acquire any further values associated with the same modinfo tag name. That is useful for any tags that have multiple occurrences (such as 'alias'), but is in particular introduced here as part of the symbol namespaces patch series to read the (potentially) multiple namespaces a module is importing. Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-08-21modules: page-align module section allocations only for arches supporting strict module rwxHe Zhe1-1/+6
We should keep the case of "#define debug_align(X) (X)" for all arches without CONFIG_HAS_STRICT_MODULE_RWX ability, which would save people, who are sensitive to system size, a lot of memory when using modules, especially for embedded systems. This is also the intention of the original #ifdef... statement and still valid for now. Note that this still keeps the effect of the fix of the following commit, 38f054d549a8 ("modules: always page-align module section allocations"), since when CONFIG_ARCH_HAS_STRICT_MODULE_RWX is enabled, module pages are aligned. Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-08-19lockdown: Enforce module signatures if the kernel is locked downDavid Howells1-7/+30
If the kernel is locked down, require that all modules have valid signatures that we can verify. I have adjusted the errors generated: (1) If there's no signature (ENODATA) or we can't check it (ENOPKG, ENOKEY), then: (a) If signatures are enforced then EKEYREJECTED is returned. (b) If there's no signature or we can't check it, but the kernel is locked down then EPERM is returned (this is then consistent with other lockdown cases). (2) If the signature is unparseable (EBADMSG, EINVAL), the signature fails the check (EKEYREJECTED) or a system error occurs (eg. ENOMEM), we return the error we got. Note that the X.509 code doesn't check for key expiry as the RTC might not be valid or might not have been transferred to the kernel's clock yet. [Modified by Matthew Garrett to remove the IMA integration. This will be replaced with integration with the IMA architecture policy patchset.] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Garrett <matthewgarrett@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Jessica Yu <jeyu@kernel.org> Signed-off-by: James Morris <jmorris@namei.org>
2019-08-05MODSIGN: Export module signature definitionsThiago Jung Bauermann1-0/+1
IMA will use the module_signature format for append signatures, so export the relevant definitions and factor out the code which verifies that the appended signature trailer is valid. Also, create a CONFIG_MODULE_SIG_FORMAT option so that IMA can select it and be able to use mod_check_sig() without having to depend on either CONFIG_MODULE_SIG or CONFIG_MODULES. s390 duplicated the definition of struct module_signature so now they can use the new <linux/module_signature.h> header instead. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-07-30modules: always page-align module section allocationsJessica Yu1-6/+1
Some arches (e.g., arm64, x86) have moved towards non-executable module_alloc() allocations for security hardening reasons. That means that the module loader will need to set the text section of a module to executable, regardless of whether or not CONFIG_STRICT_MODULE_RWX is set. When CONFIG_STRICT_MODULE_RWX=y, module section allocations are always page-aligned to handle memory rwx permissions. On some arches with CONFIG_STRICT_MODULE_RWX=n however, when setting the module text to executable, the BUG_ON() in frob_text() gets triggered since module section allocations are not page-aligned when CONFIG_STRICT_MODULE_RWX=n. Since the set_memory_* API works with pages, and since we need to call set_memory_x() regardless of whether CONFIG_STRICT_MODULE_RWX is set, we might as well page-align all module section allocations for ease of managing rwx permissions of module sections (text, rodata, etc). Fixes: 2eef1399a866 ("modules: fix BUG when load module with rodata=n") Reported-by: Martin Kaiser <lists@kaiser.cx> Reported-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: David Lechner <david@lechnology.com> Tested-by: Martin Kaiser <martin@kaiser.cx> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-06-26modules: fix compile error if don't have strict module rwxYang Yingliang1-4/+9
If CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not defined, we need stub for module_enable_nx() and module_enable_x(). If CONFIG_ARCH_HAS_STRICT_MODULE_RWX is defined, but CONFIG_STRICT_MODULE_RWX is disabled, we need stub for module_enable_nx. Move frob_text() outside of the CONFIG_STRICT_MODULE_RWX, because it is needed anyway. Fixes: 2eef1399a866 ("modules: fix BUG when load module with rodata=n") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-06-24module: allow arch overrides for .exit section namesMatthias Schiffer1-1/+6
Some archs like ARM store unwind information for .exit.text in sections with unusual names. As this unwind information refers to .exit.text, it must not be loaded when .exit.text is not loaded (when CONFIG_MODULE_UNLOAD is unset); otherwise, loading a module can fail due to relocation failures. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-06-24modules: fix BUG when load module with rodata=nYang Yingliang1-4/+7
When loading a module with rodata=n, it causes an executing NX-protected page BUG. [ 32.379191] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 32.382917] BUG: unable to handle page fault for address: ffffffffc0005000 [ 32.385947] #PF: supervisor instruction fetch in kernel mode [ 32.387662] #PF: error_code(0x0011) - permissions violation [ 32.389352] PGD 240c067 P4D 240c067 PUD 240e067 PMD 421a52067 PTE 8000000421a53063 [ 32.391396] Oops: 0011 [#1] SMP PTI [ 32.392478] CPU: 7 PID: 2697 Comm: insmod Tainted: G O 5.2.0-rc5+ #202 [ 32.394588] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 32.398157] RIP: 0010:ko_test_init+0x0/0x1000 [ko_test] [ 32.399662] Code: Bad RIP value. [ 32.400621] RSP: 0018:ffffc900029f3ca8 EFLAGS: 00010246 [ 32.402171] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 32.404332] RDX: 00000000000004c7 RSI: 0000000000000cc0 RDI: ffffffffc0005000 [ 32.406347] RBP: ffffffffc0005000 R08: ffff88842fbebc40 R09: ffffffff810ede4a [ 32.408392] R10: ffffea00108e3480 R11: 0000000000000000 R12: ffff88842bee21a0 [ 32.410472] R13: 0000000000000001 R14: 0000000000000001 R15: ffffc900029f3e78 [ 32.412609] FS: 00007fb4f0c0a700(0000) GS:ffff88842fbc0000(0000) knlGS:0000000000000000 [ 32.414722] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.416290] CR2: ffffffffc0004fd6 CR3: 0000000421a90004 CR4: 0000000000020ee0 [ 32.418471] Call Trace: [ 32.419136] do_one_initcall+0x41/0x1df [ 32.420199] ? _cond_resched+0x10/0x40 [ 32.421433] ? kmem_cache_alloc_trace+0x36/0x160 [ 32.422827] do_init_module+0x56/0x1f7 [ 32.423946] load_module+0x1e67/0x2580 [ 32.424947] ? __alloc_pages_nodemask+0x150/0x2c0 [ 32.426413] ? map_vm_area+0x2d/0x40 [ 32.427530] ? __vmalloc_node_range+0x1ef/0x260 [ 32.428850] ? __do_sys_init_module+0x135/0x170 [ 32.430060] ? _cond_resched+0x10/0x40 [ 32.431249] __do_sys_init_module+0x135/0x170 [ 32.432547] do_syscall_64+0x43/0x120 [ 32.433853] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Because if rodata=n, set_memory_x() can't be called, fix this by calling set_memory_x in complete_formation(); Fixes: f2c65fb3221a ("x86/modules: Avoid breaking W^X while loading modules") Suggested-by: Jian Cheng <cj.chengjian@huawei.com> Reviewed-by: Nadav Amit <namit@vmware.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-06-14kernel/module: Fix mem leak in module_add_modinfo_attrsYueHaibing1-5/+17
In module_add_modinfo_attrs if sysfs_create_file fails, we forget to free allocated modinfo_attrs and roll back the sysfs files. Fixes: 03e88ae1b13d ("[PATCH] fix module sysfs files reference counting") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-06-07kernel: module: Use struct_size() helperGustavo A. R. Silva1-2/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct module_sect_attrs { ... struct module_sect_attr attrs[0]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(*sect_attrs) + nloaded * sizeof(sect_attrs->attrs[0] with: struct_size(sect_attrs, attrs, nloaded) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-06-05kernel/module.c: Only return -EEXIST for modules that have finished loadingPrarit Bhargava1-4/+2
Microsoft HyperV disables the X86_FEATURE_SMCA bit on AMD systems, and linux guests boot with repeated errors: amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2) amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2) The warnings occur because the module code erroneously returns -EEXIST for modules that have failed to load and are in the process of being removed from the module list. module amd64_edac_mod has a dependency on module edac_mce_amd. Using modules.dep, systemd will load edac_mce_amd for every request of amd64_edac_mod. When the edac_mce_amd module loads, the module has state MODULE_STATE_UNFORMED and once the module load fails and the state becomes MODULE_STATE_GOING. Another request for edac_mce_amd module executes and add_unformed_module() will erroneously return -EEXIST even though the previous instance of edac_mce_amd has MODULE_STATE_GOING. Upon receiving -EEXIST, systemd attempts to load amd64_edac_mod, which fails because of unknown symbols from edac_mce_amd. add_unformed_module() must wait to return for any case other than MODULE_STATE_LIVE to prevent a race between multiple loads of dependent modules. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Barret Rhoden <brho@google.com> Cc: David Arcari <darcari@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-28srcu: Allocate per-CPU data for DEFINE_SRCU() in modulesPaul E. McKenney1-0/+5
Adding DEFINE_SRCU() or DEFINE_STATIC_SRCU() to a loadable module requires that the size of the reserved region be increased, which is not something we want to be doing all that often. One approach would be to require that loadable modules define an srcu_struct and invoke init_srcu_struct() from their module_init function and cleanup_srcu_struct() from their module_exit function. However, this is more than a bit user unfriendly. This commit therefore creates an ___srcu_struct_ptrs linker section, and pointers to srcu_struct structures created by DEFINE_SRCU() and DEFINE_STATIC_SRCU() within a module are placed into that module's ___srcu_struct_ptrs section. The required init_srcu_struct() and cleanup_srcu_struct() functions are then automatically invoked as needed when that module is loaded and unloaded, thus allowing modules to continue to use DEFINE_SRCU() and DEFINE_STATIC_SRCU() while avoiding the need to increase the size of the reserved region. Many of the algorithms and some of the code was cheerfully cherry-picked from other code making use of linker sections, perhaps most notably from tracepoints. All bugs are nevertheless the sole property of the author. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> [ paulmck: Use __section() and use "default" in srcu_module_notify()'s "switch" statement as suggested by Joel Fernandes. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2019-04-30modules: Use vmalloc special flagRick Edgecombe1-38/+39
Use new flag for handling freeing of special permissioned memory in vmalloc and remove places where memory was set RW before freeing which is no longer needed. Since freeing of VM_FLUSH_RESET_PERMS memory is not supported in an interrupt by vmalloc, the freeing of init sections is moved to a work queue. Instead of call_rcu it now uses synchronize_rcu() in the work queue. Lastly, there is now a WARN_ON in module_memfree since it should not be called in an interrupt with special memory as is required for VM_FLUSH_RESET_PERMS. Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@surriel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-18-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-30x86/modules: Avoid breaking W^X while loading modulesNadav Amit1-0/+5
When modules and BPF filters are loaded, there is a time window in which some memory is both writable and executable. An attacker that has already found another vulnerability (e.g., a dangling pointer) might be able to exploit this behavior to overwrite kernel code. Prevent having writable executable PTEs in this stage. In addition, avoiding having W+X mappings can also slightly simplify the patching of modules code on initialization (e.g., by alternatives and static-key), as would be done in the next patch. This was actually the main motivation for this patch. To avoid having W+X mappings, set them initially as RW (NX) and after they are set as RO set them as X as well. Setting them as executable is done as a separate step to avoid one core in which the old PTE is cached (hence writable), and another which sees the updated PTE (executable), which would break the W^X protection. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: https://lkml.kernel.org/r/20190426001143.4983-12-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-28kallsyms: store type information in its own arrayEugene Loh1-7/+14
When a module is loaded, its symbols' Elf_Sym information is stored in a symtab. Further, type information is also captured. Since Elf_Sym has no type field, historically the st_info field has been hijacked for storing type: st_info was overwritten. commit 5439c985c5a83a8419f762115afdf560ab72a452 ("module: Overwrite st_size instead of st_info") changes that practice, as its one-liner indicates. Unfortunately, this change overwrites symbol size, information that a tool like DTrace expects to find. Allocate a typetab array to store type information so that no Elf_Sym field needs to be overwritten. Fixes: 5439c985c5a8 ("module: Overwrite st_size instead of st_info") Signed-off-by: Eugene Loh <eugene.loh@oracle.com> Reviewed-by: Nick Alcock <nick.alcock@oracle.com> [jeyu: renamed typeoff -> typeoffs ] Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-03-27x86/ima: require signed kernel modulesMimi Zohar1-0/+5
Have the IMA architecture specific policy require signed kernel modules on systems with secure boot mode enabled; and coordinate the different signature verification methods, so only one signature is required. Requiring appended kernel module signatures may be configured, enabled on the boot command line, or with this patch enabled in secure boot mode. This patch defines set_module_sig_enforced(). To coordinate between appended kernel module signatures and IMA signatures, only define an IMA MODULE_CHECK policy rule if CONFIG_MODULE_SIG is not enabled. A custom IMA policy may still define and require an IMA signature. Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org>
2019-03-07dynamic_debug: add static inline stub for ddebug_add_moduleRasmus Villemoes1-2/+0
For symmetry with ddebug_remove_module, and to avoid a bit of ifdeffery in module.c, move the declaration of ddebug_add_module inside #if defined(CONFIG_DYNAMIC_DEBUG) and add a corresponding no-op stub in the #else branch. Link: http://lkml.kernel.org/r/20190212214150.4807-10-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07dynamic_debug: move pr_err from module.c to ddebug_add_moduleRasmus Villemoes1-3/+1
This serves two purposes: First, we get a diagnostic if (though extremely unlikely), any of the calls of ddebug_add_module for built-in code fails, effectively disabling dynamic_debug. Second, I want to make struct _ddebug opaque, and avoid accessing any of its members outside dynamic_debug.[ch]. Link: http://lkml.kernel.org/r/20190212214150.4807-9-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-06jump_label: move 'asm goto' support test to KconfigMasahiro Yamada1-1/+1
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2018-12-18bpf: support raw tracepoints in modulesMatt Mullins1-0/+5
Distributions build drivers as modules, including network and filesystem drivers which export numerous tracepoints. This enables bpf(BPF_RAW_TRACEPOINT_OPEN) to attach to those tracepoints. Signed-off-by: Matt Mullins <mmullins@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-14ARM: module: Fix function kallsyms on Thumb-2Vincent Whitchurch1-16/+27
Thumb-2 functions have the lowest bit set in the symbol value in the symtab. When kallsyms are generated for the vmlinux, the kallsyms are generated from the output of nm, and nm clears the lowest bit. $ arm-linux-gnueabihf-readelf -a vmlinux | grep show_interrupts 95947: 8015dc89 686 FUNC GLOBAL DEFAULT 2 show_interrupts $ arm-linux-gnueabihf-nm vmlinux | grep show_interrupts 8015dc88 T show_interrupts $ cat /proc/kallsyms | grep show_interrupts 8015dc88 T show_interrupts However, for modules, the kallsyms uses the values in the symbol table without modification, so for functions in modules, the lowest bit is set in kallsyms. $ arm-linux-gnueabihf-readelf -a drivers/net/tun.ko | grep tun_get_socket 333: 00002d4d 36 FUNC GLOBAL DEFAULT 1 tun_get_socket $ arm-linux-gnueabihf-nm drivers/net/tun.ko | grep tun_get_socket 00002d4c T tun_get_socket $ cat /proc/kallsyms | grep tun_get_socket 7f802d4d t tun_get_socket [tun] Because of this, the symbol+offset of the crashing instruction shown in oopses is incorrect when the crash is in a module. For example, given a tun_get_socket which starts like this, 00002d4c <tun_get_socket>: 2d4c: 6943 ldr r3, [r0, #20] 2d4e: 4a07 ldr r2, [pc, #28] 2d50: 4293 cmp r3, r2 a crash when tun_get_socket is called with NULL results in: PC is at tun_xdp+0xa3/0xa4 [tun] pc : [<7f802d4c>] As can be seen, the "PC is at" line reports the wrong symbol name, and the symbol+offset will point to the wrong source line if it is passed to gdb. To solve this, add a way for archs to fixup the reading of these module kallsyms values, and use that to clear the lowest bit for function symbols on Thumb-2. After the fix: # cat /proc/kallsyms | grep tun_get_socket 7f802d4c t tun_get_socket [tun] PC is at tun_get_socket+0x0/0x24 [tun] pc : [<7f802d4c>] Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2018-12-14module: Overwrite st_size instead of st_infoVincent Whitchurch1-2/+2
st_info is currently overwritten after relocation and used to store the elf_type(). However, we're going to need it fix kallsyms on ARM's Thumb-2 kernels, so preserve st_info and overwrite the st_size field instead. st_size is neither used by the module core nor by any architecture. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2018-12-06kobject: return error code if writing /sys/.../uevent failsPeter Rajnoha1-2/+4
Propagate error code back to userspace if writing the /sys/.../uevent file fails. Before, the write operation always returned with success, even if we failed to recognize the input string or if we failed to generate the uevent itself. With the error codes properly propagated back to userspace, we are able to react in userspace accordingly by not assuming and awaiting a uevent that is not delivered. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-29module: make it clearer when we're handling kallsyms symbols vs exported symbolsJessica Yu1-34/+44
The module loader internally works with both exported symbols represented as struct kernel_symbol, as well as Elf symbols from a module's symbol table. It's hard to distinguish sometimes which type of symbol we're handling given that some helper function names are not consistent or helpful. Take get_ksymbol() for instance - are we looking for an exported symbol or a kallsyms symbol here? Or symname() and kernel_symbol_name() - which function handles an exported symbol and which one an Elf symbol? Clean up and unify the function naming scheme a bit to make it clear which kind of symbol we're handling. This change only affects static functions internal to the module loader. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2018-11-27modules: Replace synchronize_sched() and call_rcu_sched()Paul E. McKenney1-7/+7
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). Similarly, call_rcu_sched() can be replaced by call_rcu(). This commit therefore makes these changes. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Acked-by: Jessica Yu <jeyu@kernel.org>
2018-09-27jump_table: Move entries into ro_after_init regionArd Biesheuvel1-0/+9
The __jump_table sections emitted into the core kernel and into each module consist of statically initialized references into other parts of the code, and with the exception of entries that point into init code, which are defused at post-init time, these data structures are never modified. So let's move them into the ro_after_init section, to prevent them from being corrupted inadvertently by buggy code, or deliberately by an attacker. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Jessica Yu <jeyu@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: https://lkml.kernel.org/r/20180919065144.25010-9-ard.biesheuvel@linaro.org
2018-08-22module: use relative references for __ksymtab entriesArd Biesheuvel1-6/+26
An ordinary arm64 defconfig build has ~64 KB worth of __ksymtab entries, each consisting of two 64-bit fields containing absolute references, to the symbol itself and to a char array containing its name, respectively. When we build the same configuration with KASLR enabled, we end up with an additional ~192 KB of relocations in the .init section, i.e., one 24 byte entry for each absolute reference, which all need to be processed at boot time. Given how the struct kernel_symbol that describes each entry is completely local to module.c (except for the references emitted by EXPORT_SYMBOL() itself), we can easily modify it to contain two 32-bit relative references instead. This reduces the size of the __ksymtab section by 50% for all 64-bit architectures, and gets rid of the runtime relocations entirely for architectures implementing KASLR, either via standard PIE linking (arm64) or using custom host tools (x86). Note that the binary search involving __ksymtab contents relies on each section being sorted by symbol name. This is implemented based on the input section names, not the names in the ksymtab entries, so this patch does not interfere with that. Given that the use of place-relative relocations requires support both in the toolchain and in the module loader, we cannot enable this feature for all architectures. So make it dependent on whether CONFIG_HAVE_ARCH_PREL32_RELOCATIONS is defined. Link: http://lkml.kernel.org/r/20180704083651.24360-4-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jessica Yu <jeyu@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02kernel/module: Use kmemdup to replace kmalloc+memcpyzhong jiang1-4/+2
we prefer to the kmemdup rather than kmalloc+memcpy. so just replace them. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2018-07-16module: replace the existing LSM hook in init_moduleMimi Zohar1-1/+1
Both the init_module and finit_module syscalls call either directly or indirectly the security_kernel_read_file LSM hook. This patch replaces the direct call in init_module with a call to the new security_kernel_load_data hook and makes the corresponding changes in SELinux, LoadPin, and IMA. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Jessica Yu <jeyu@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-07-02modsign: log module name in the event of an errorJessica Yu1-21/+1
Now that we have the load_info struct all initialized (including info->name, which contains the name of the module) before module_sig_check(), make the load_info struct and hence module name available to mod_verify_sig() so that we can log the module name in the event of an error. Signed-off-by: Jessica Yu <jeyu@kernel.org>
2018-06-25module: replace VMLINUX_SYMBOL_STR() with __stringify() or string literalMasahiro Yamada1-4/+2
With the special case handling for Blackfin and Metag was removed by commit 94e58e0ac312 ("export.h: remove code for prefixing symbols with underscore"), VMLINUX_SYMBOL_STR() is now equivalent to __stringify(). Replace the remaining usages to prepare for the entire removal of VMLINUX_SYMBOL_STR(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2018-06-25module: print sensible error codeJason A. Donenfeld1-2/+2
Printing "err 0" to the user in the warning message is not particularly useful, especially when this gets transformed into a -ENOENT for the remainder of the call chain. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2018-06-22module: setup load info before module_sig_check()Jessica Yu1-34/+43
We want to be able to log the module name in early error messages, such as when module signature verification fails. Previously, the module name is set in layout_and_allocate(), meaning that any error messages that happen before (such as those in module_sig_check()) won't be logged with a module name, which isn't terribly helpful. In order to do this, reshuffle the order in load_module() and set up load info earlier so that we can log the module name along with these error messages. This requires splitting rewrite_section_headers() out of setup_load_info(). While we're at it, clean up and split up the operations done in layout_and_allocate(), setup_load_info(), and rewrite_section_headers() more cleanly so these functions only perform what their names suggest. Signed-off-by: Jessica Yu <jeyu@kernel.org>
2018-06-22module: make it clear when we're handling the module copy in info->hdrJessica Yu1-21/+21
In load_module(), it's not always clear whether we're handling the temporary module copy in info->hdr (which is freed at the end of load_module()) or if we're handling the module already allocated and copied to it's final place. Adding an info->mod field and using it whenever we're handling the temporary copy makes that explicitly clear. Signed-off-by: Jessica Yu <jeyu@kernel.org>