| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull printk fixes from Petr Mladek:
- Try to flush backtraces from other CPUs also on the local one. This
was a regression caused by printk_safe buffers removal.
- Remove header dependency warning.
* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove printk.h inclusion in percpu.h
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
|
|
|
|
printk from NMI context relies on irq work being raised on the local CPU
to print to console. This can be a problem if the NMI was raised by a
lockup detector to print lockup stack and regs, because the CPU may not
enable irqs (because it is locked up).
Introduce printk_trigger_flush() that can be called another CPU to try
to get those messages to the console, call that where printk_safe_flush
was previously called.
Fixes: 93d102f094be ("printk: remove safe buffers")
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211107045116.1754411-1-npiggin@gmail.com
|
|
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
|
|
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull printk updates from Petr Mladek:
- Extend %pGp print format to print hex value of the page flags
- Use kvmalloc instead of kmalloc to allocate devkmsg buffers
- Misc cleanup and warning fixes
* tag 'printk-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsprintf: Update %pGp documentation about that it prints hex value
lib/vsprintf.c: Amend static asserts for format specifier flags
vsprintf: Make %pGp print the hex value
test_printf: Append strings more efficiently
test_printf: Remove custom appending of '|'
test_printf: Remove separate page_flags variable
test_printf: Make pft array const
ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK
printk: use gnu_printf format attribute for printk_sprint()
printk: avoid -Wsometimes-uninitialized warning
printk: use kvmalloc instead of kmalloc for devkmsg_user
|
|
Fix the following W=1 kernel build warning:
kernel/printk/printk.c: In function 'printk_sprint':
kernel/printk/printk.c:1913:9: warning: function 'printk_sprint' might be
a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210927142203.124730-1-john.ogness@linutronix.de
|
|
The boot-time allocation interface for memblock is a mess, with
'memblock_alloc()' returning a virtual pointer, but then you are
supposed to free it with 'memblock_free()' that takes a _physical_
address.
Not only is that all kinds of strange and illogical, but it actually
causes bugs, when people then use it like a normal allocation function,
and it fails spectacularly on a NULL pointer:
https://lore.kernel.org/all/20210912140820.GD25450@xsang-OptiPlex-9020/
or just random memory corruption if the debug checks don't catch it:
https://lore.kernel.org/all/61ab2d0c-3313-aaab-514c-e15b7aa054a0@suse.cz/
I really don't want to apply patches that treat the symptoms, when the
fundamental cause is this horribly confusing interface.
I started out looking at just automating a sane replacement sequence,
but because of this mix or virtual and physical addresses, and because
people have used the "__pa()" macro that can take either a regular
kernel pointer, or just the raw "unsigned long" address, it's all quite
messy.
So this just introduces a new saner interface for freeing a virtual
address that was allocated using 'memblock_alloc()', and that was kept
as a regular kernel pointer. And then it converts a couple of users
that are obvious and easy to test, including the 'xbc_nodes' case in
lib/bootconfig.c that caused problems.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Size of struct devkmsg_user increased to 16784 by commit 896fbe20b4e2
("printk: use the lockless ringbuffer") so order3(32kb) is needed for
kmalloc. Under stress conditions the kernel may temporary fail to
allocate 32k with kmalloc. Use kvmalloc instead of kmalloc to aviod
this issue.
qseecomd invoked oom-killer: gfp_mask=0x40cc0(GFP_KERNEL|__GFP_COMP), order=3, oom_score_adj=-1000
Call trace:
dump_backtrace+0x0/0x34c
dump_stack_lvl+0xd4/0x16c
dump_header+0x5c/0x338
out_of_memory+0x374/0x4cc
__alloc_pages_slowpath+0xbc8/0x1130
__alloc_pages_nodemask+0x170/0x1b0
kmalloc_order+0x5c/0x24c
devkmsg_open+0x1f4/0x558
memory_open+0x94/0xf0
chrdev_open+0x288/0x3dc
do_dentry_open+0x2b4/0x618
path_openat+0xce4/0xfa8
do_filp_open+0xb0/0x164
do_sys_openat2+0xa8/0x264
__arm64_sys_openat+0x70/0xa0
el0_svc_common+0xc4/0x270
el0_svc+0x34/0x9c
el0_sync_handler+0x88/0xf0
el0_sync+0x1bc/0x200
DMA32: 4521*4kB (UMEC) 1377*8kB (UMECH) 73*16kB (UM) 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 30268kB
Normal: 2490*4kB (UMEH) 277*8kB (UMH) 27*16kB (UH) 1*32kB (H) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 12640kB
Signed-off-by: Yong-Taek Lee <ytk.lee@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210830071701epcms1p70f72ae10940bc407a3c33746d20da771@epcms1p7
|
|
|
|
|
|
|
|
console_verbose() increases console loglevel to
CONSOLE_LOGLEVEL_MOTORMOUTH, which provides more information
to debug a panic/oops.
Unfortunately, in Arista we maintain some DUTs (Device Under Test) that
are configured to have 9600 baud rate. While verbose console messages
have their value to post-analyze crashes, on such setup they:
- may prevent panic/oops messages being printed
- take too long to flush on console resulting in watchdog reboot
In all our setups we use kdump which saves dmesg buffer after panic,
so in reality those extra messages on console provide no additional value,
but rather add risk of not getting to __crash_kexec().
Provide printk.console_no_auto_verbose boot parameter, which allows
to switch off printk being verbose on oops/panic/lockdep.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210727130635.675184-3-dima@arista.com
|
|
Syslog's SYSLOG_ACTION_READ is supposed to block until the next
syslog record can be read, and then it should read that record.
However, because @syslog_lock is not held between waking up and
reading the record, another reader could read the record first,
thus causing SYSLOG_ACTION_READ to return with a value of 0, never
having read _anything_.
By holding @syslog_lock between waking up and reading, it can be
guaranteed that SYSLOG_ACTION_READ blocks until it successfully
reads a syslog record (or a real error occurs).
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-7-john.ogness@linutronix.de
|
|
@syslog_lock was a raw_spin_lock to simplify the transition of
removing @logbuf_lock and the safe buffers. With that transition
complete, and since all uses of @syslog_lock are within sleepable
contexts, @syslog_lock can become a mutex.
Note that until now register_console() would disable interrupts
using irqsave, which implies that it may be called with interrupts
disabled. And indeed, there is one possible call chain on parisc
where this happens:
handle_interruption(code=1) /* High-priority machine check (HPMC) */
pdc_console_restart()
pdc_console_init_force()
register_console()
However, register_console() calls console_lock(), which might sleep.
So it has never been allowed to call register_console() from an
atomic context and the above call chain is a bug.
Note that the removal of read_syslog_seq_irq() is slightly changing
the behavior of SYSLOG_ACTION_READ by testing against a possibly
outdated @seq value. However, the value of @seq could have changed
after the test, so it is not a new window. A follow-up commit closes
this window.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-6-john.ogness@linutronix.de
|
|
With @logbuf_lock removed, the high level printk functions for
storing messages are lockless. Messages can be stored from any
context, so there is no need for the NMI and safe buffers anymore.
Remove the NMI and safe buffers.
Although the safe buffers are removed, the NMI and safe context
tracking is still in place. In these contexts, store the message
immediately but still use irq_work to defer the console printing.
Since printk recursion tracking is in place, safe context tracking
for most of printk is not needed. Remove it. Only safe context
tracking relating to the console and console_owner locks is left
in place. This is because the console and console_owner locks are
needed for the actual printing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-4-john.ogness@linutronix.de
|
|
Currently the printk safe buffers provide a form of recursion
protection by redirecting to the safe buffers whenever printk() is
recursively called.
In preparation for removal of the safe buffers, provide an alternate
explicit recursion protection. Recursion is limited to 3 levels
per-CPU and per-context.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-3-john.ogness@linutronix.de
|
|
Commit 337015573718 ("printk: Userspace format indexing support") turned
printk() into a macro, but left the kerneldoc comment for it with the (now)
_printk() function, resulting in this docs-build warning:
kernel/printk/printk.c:1: warning: 'printk' not found
Move the kerneldoc comment back next to the (now) macro it's meant to
describe and have the docs build find it there.
Fixes: 337015573718b161 ("printk: Userspace format indexing support")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87o8aqt7qn.fsf@meer.lwn.net
|
|
We have a number of systems industry-wide that have a subset of their
functionality that works as follows:
1. Receive a message from local kmsg, serial console, or netconsole;
2. Apply a set of rules to classify the message;
3. Do something based on this classification (like scheduling a
remediation for the machine), rinse, and repeat.
As a couple of examples of places we have this implemented just inside
Facebook, although this isn't a Facebook-specific problem, we have this
inside our netconsole processing (for alarm classification), and as part
of our machine health checking. We use these messages to determine
fairly important metrics around production health, and it's important
that we get them right.
While for some kinds of issues we have counters, tracepoints, or metrics
with a stable interface which can reliably indicate the issue, in order
to react to production issues quickly we need to work with the interface
which most kernel developers naturally use when developing: printk.
Most production issues come from unexpected phenomena, and as such
usually the code in question doesn't have easily usable tracepoints or
other counters available for the specific problem being mitigated. We
have a number of lines of monitoring defence against problems in
production (host metrics, process metrics, service metrics, etc), and
where it's not feasible to reliably monitor at another level, this kind
of pragmatic netconsole monitoring is essential.
As one would expect, monitoring using printk is rather brittle for a
number of reasons -- most notably that the message might disappear
entirely in a new version of the kernel, or that the message may change
in some way that the regex or other classification methods start to
silently fail.
One factor that makes this even harder is that, under normal operation,
many of these messages are never expected to be hit. For example, there
may be a rare hardware bug which one wants to detect if it was to ever
happen again, but its recurrence is not likely or anticipated. This
precludes using something like checking whether the printk in question
was printed somewhere fleetwide recently to determine whether the
message in question is still present or not, since we don't anticipate
that it should be printed anywhere, but still need to monitor for its
future presence in the long-term.
This class of issue has happened on a number of occasions, causing
unhealthy machines with hardware issues to remain in production for
longer than ideal. As a recent example, some monitoring around
blk_update_request fell out of date and caused semi-broken machines to
remain in production for longer than would be desirable.
Searching through the codebase to find the message is also extremely
fragile, because many of the messages are further constructed beyond
their callsite (eg. btrfs_printk and other module-specific wrappers,
each with their own functionality). Even if they aren't, guessing the
format and formulation of the underlying message based on the aesthetics
of the message emitted is not a recipe for success at scale, and our
previous issues with fleetwide machine health checking demonstrate as
much.
This provides a solution to the issue of silently changed or deleted
printks: we record pointers to all printk format strings known at
compile time into a new .printk_index section, both in vmlinux and
modules. At runtime, this can then be iterated by looking at
<debugfs>/printk/index/<module>, which emits the following format, both
readable by humans and able to be parsed by machines:
$ head -1 vmlinux; shuf -n 5 vmlinux
# <level[,flags]> filename:line function "format"
<5> block/blk-settings.c:661 disk_stack_limits "%s: Warning: Device %s is misaligned\n"
<4> kernel/trace/trace.c:8296 trace_create_file "Could not create tracefs '%s' entry\n"
<6> arch/x86/kernel/hpet.c:144 _hpet_print_config "hpet: %s(%d):\n"
<6> init/do_mounts.c:605 prepare_namespace "Waiting for root device %s...\n"
<6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n"
This mitigates the majority of cases where we have a highly-specific
printk which we want to match on, as we can now enumerate and check
whether the format changed or the printk callsite disappeared entirely
in userspace. This allows us to catch changes to printks we monitor
earlier and decide what to do about it before it becomes problematic.
There is no additional runtime cost for printk callers or printk itself,
and the assembly generated is exactly the same.
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org> # for module.{c,h}
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/e42070983637ac5e384f17fbdbe86d19c7b212a5.1623775748.git.chris@chrisdown.name
|
|
parse_prefix is needed externally by later patches, so move it into a
context where it can be used as such. Also give it the printk_ prefix to
reduce the chance of collisions.
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/b22ba314a860e5c7f887958f1eab2649f9bd1d06.1623775748.git.chris@chrisdown.name
|
|
In the past, `enum log_flags` was part of `struct log`, hence the name.
`struct log` has since been reworked and now this struct is stored
inside `struct printk_info`. However, the name was never updated, which
is somewhat confusing -- especially since these flags operate at the
record level rather than at the level of an abstract log.
printk_info_flags also joins its other metadata struct friends in
printk_ringbuffer.h.
Signed-off-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/3dd801982f02603e6e3aa4f8bc4f5ebb830a4949.1623775748.git.chris@chrisdown.name
|
|
The standard printk() tries to flush the message to the console
immediately. It tries to take the console lock. If the lock is
already taken then the current owner is responsible for flushing
even the new message.
There is a small race window between checking whether a new message is
available and releasing the console lock. It is solved by re-checking
the state after releasing the console lock. If the check is positive
then console_unlock() tries to take the lock again and process the new
message as well.
The commit 996e966640ddea7b535c ("printk: remove logbuf_lock") causes that
console_seq is not longer read atomically. As a result, the re-check might
be done with an inconsistent 64-bit index.
Solve it by using the last sequence number that has been checked under
the console lock. In the worst case, it will take the lock again only
to realized that the new message has already been proceed. But it
was possible even before.
The variable next_seq is marked as __maybe_unused to call down compiler
warning when CONFIG_PRINTK is not defined.
Fixes: commit 996e966640ddea7b535c ("printk: remove logbuf_lock")
Reported-by: kernel test robot <lkp@intel.com> # unused next_seq warning
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20210702150657.26760-1-pmladek@suse.com
|
|
The cpu lock implementation uses a full memory barrier to take
the lock, but no memory barriers when releasing the lock. This
means that changes performed by a lock owner may not be seen by
the next lock owner. This may have been "good enough" for use
by dump_stack() as a serialization mechanism, but it is not
enough to provide proper protection for a critical section.
Correct this problem by using acquire/release memory barriers
for lock/unlock, respectively.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210617095051.4808-3-john.ogness@linutronix.de
|
|
dump_stack() implements its own cpu-reentrant spinning lock to
best-effort serialize stack traces in the printk log. However,
there are other functions (such as show_regs()) that can also
benefit from this serialization.
Move the cpu-reentrant spinning lock (cpu lock) into new helper
functions printk_cpu_lock_irqsave()/printk_cpu_unlock_irqrestore()
so that it is available for others as well. For !CONFIG_SMP the
cpu lock is a NOP.
Note that having multiple cpu locks in the system can easily
lead to deadlock. Code needing a cpu lock should use the
printk cpu lock, since the printk cpu lock could be acquired
from any code and any context.
Also note that it is not necessary for a cpu lock to disable
interrupts. However, in upcoming work this cpu lock will be used
for emergency tasks (for example, atomic consoles during kernel
crashes) and any interruptions while holding the cpu lock should
be avoided if possible.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.com: Backported on top of 5.13-rc1.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210617095051.4808-2-john.ogness@linutronix.de
|
|
s/sempahore/semaphore/
s/exacly/exactly/
s/unregistred/unregistered/
s/interation/iteration/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.com: Removed 4th hunk. The string has already been removed in the meantime.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210328043932.8310-1-unixbhaskar@gmail.com
|
|
The printk code is already hard enough to understand. Remove an
unnecessary indirection by renaming vprintk_func to vprintk (adding
the asmlinkage annotation), and removing the vprintk definition from
printk.c. That way, printk is implemented in terms of vprintk as one
would expect, and there's no "vprintk_func, what's that? Some function
pointer that gets set where?"
The declaration of vprintk in linux/printk.h already has the
__printf(1,0) attribute, there's no point repeating that with the
definition - it's for diagnostics in callers.
linux/printk.h already contains a static inline {return 0;} definition
of vprintk when !CONFIG_PRINTK.
Since the corresponding stub definition of vprintk_func was not marked
"static inline", any translation unit including internal.h would get a
definition of vprintk_func - it just so happens that for
!CONFIG_PRINTK, there is precisely one such TU, namely printk.c. Had
there been more, it would be a link error; now it's just a silly waste
of a few bytes of .text, which one must assume are rather precious to
anyone disabling PRINTK.
$ objdump -dr kernel/printk/printk.o
00000330 <vprintk_func>:
330: 31 c0 xor %eax,%eax
332: c3 ret
333: 8d b4 26 00 00 00 00 lea 0x0(%esi,%eiz,1),%esi
33a: 8d b6 00 00 00 00 lea 0x0(%esi),%esi
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210323144201.486050-1-linux@rasmusvillemoes.dk
|
|
Upon registering a console, safe buffers are activated when setting
up the sequence number to replay the log. However, these are already
protected by @console_sem and @syslog_lock. Remove the unnecessary
safe buffer usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-16-john.ogness@linutronix.de
|
|
kmsg_dump_rewind() and kmsg_dump_get_line() are lockless, so there is
no need for _nolock() variants. Remove these functions and switch all
callers of the _nolock() variants.
The functions without _nolock() were chosen because they are already
exported to kernel modules.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-15-john.ogness@linutronix.de
|
|
Since the ringbuffer is lockless, there is no need for it to be
protected by @logbuf_lock. Remove @logbuf_lock.
@console_seq, @exclusive_console_stop_seq, @console_dropped are
protected by @console_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-14-john.ogness@linutronix.de
|
|
Rather than storing the iterator information in the registered
kmsg_dumper structure, create a separate iterator structure. The
kmsg_dump_iter structure can reside on the stack of the caller, thus
allowing lockless use of the kmsg_dump functions.
Update code that accesses the kernel logs using the kmsg_dumper
structure to use the new kmsg_dump_iter structure. For kmsg_dumpers,
this also means adding a call to kmsg_dump_rewind() to initialize
the iterator.
All this is in preparation for removal of @logbuf_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org> # pstore
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-13-john.ogness@linutronix.de
|
|
All 6 kmsg_dumpers do not benefit from the @active flag:
(provide their own synchronization)
- arch/powerpc/kernel/nvram_64.c
- arch/um/kernel/kmsg_dump.c
- drivers/mtd/mtdoops.c
- fs/pstore/platform.c
(only dump on KMSG_DUMP_PANIC, which does not require
synchronization)
- arch/powerpc/platforms/powernv/opal-kmsg.c
- drivers/hv/vmbus_drv.c
The other 2 kmsg_dump users also do not rely on @active:
(hard-code @active to always be true)
- arch/powerpc/xmon/xmon.c
- kernel/debug/kdb/kdb_main.c
Therefore, @active can be removed.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-12-john.ogness@linutronix.de
|
|
The global variables @syslog_seq, @syslog_partial, @syslog_time
and write access to @clear_seq are protected by @logbuf_lock.
Once @logbuf_lock is removed, these variables will need their
own synchronization method. Introduce @syslog_lock for this
purpose.
@syslog_lock is a raw_spin_lock for now. This simplifies the
transition to removing @logbuf_lock. Once @logbuf_lock and the
safe buffers are removed, @syslog_lock can change to spin_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-11-john.ogness@linutronix.de
|
|
@user->seq is indirectly protected by @logbuf_lock. Once @logbuf_lock
is removed, @user->seq will be no longer safe from an atomicity point
of view.
In preparation for the removal of @logbuf_lock, change it to
atomic64_t to provide this safety.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-10-john.ogness@linutronix.de
|
|
kmsg_dump_rewind_nolock() locklessly reads @clear_seq. However,
this is not done atomically. Since @clear_seq is 64-bit, this
cannot be an atomic operation for all platforms. Therefore, use
a seqcount_latch to allow readers to always read a consistent
value.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-9-john.ogness@linutronix.de
|
|
Instead of using "LOG_LINE_MAX + PREFIX_MAX" for temporary buffer
sizes, introduce CONSOLE_LOG_MAX. This represents the maximum size
that is allowed to be printed to the console for a single record.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-8-john.ogness@linutronix.de
|
|
The logic for finding records to fit into a buffer is the same for
kmsg_dump_get_buffer() and syslog_print_all(). Introduce a helper
function find_first_fitting_seq() to handle this logic.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-7-john.ogness@linutronix.de
|
|
kmsg_dump_get_buffer() requires nearly the same logic as
syslog_print_all(), but uses different variable names and
does not make use of the ringbuffer loop macros. Modify
kmsg_dump_get_buffer() so that the implementation is as similar
to syslog_print_all() as possible.
A follow-up commit will move this common logic into a
separate helper function.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-6-john.ogness@linutronix.de
|
|
The second loop of syslog_print_all() subtracts lengths that were
added in the first loop. With commit b031a684bfd0 ("printk: remove
logbuf_lock writer-protection of ringbuffer") it is possible that
records are (over)written during syslog_print_all(). This allows the
possibility of the second loop subtracting lengths that were never
added in the first loop.
This situation can result in syslog_print_all() filling the buffer
starting from a later record, even though there may have been room
to fit the earlier record(s) as well.
Fixes: b031a684bfd0 ("printk: remove logbuf_lock writer-protection of ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-4-john.ogness@linutronix.de
|
|
|
|
If message sizes average larger than expected (more than 32
characters), the data_ring will wrap before the desc_ring. Once the
data_ring wraps, it will start invalidating descriptors. These
invalid descriptors hang around until they are eventually recycled
when the desc_ring wraps. Readers do not care about invalid
descriptors, but they still need to iterate past them. If the
average message size is much larger than 32 characters, then there
will be many invalid descriptors preceding the valid descriptors.
The function prb_first_valid_seq() always begins at the oldest
descriptor and searches for the first valid descriptor. This can
be rather expensive for the above scenario. And, in fact, because
of its heavy usage in /dev/kmsg, there have been reports of long
delays and even RCU stalls.
For code that does not need to search from the oldest record,
replace prb_first_valid_seq() usage with prb_read_valid_*()
functions, which provide a start sequence number to search from.
Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: J. Avila <elavila@google.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210211173152.1629-1-john.ogness@linutronix.de
|
|
|
|
Commit f0e386ee0c0b ("printk: fix buffer overflow potential for
print_text()") added string termination in record_print_text().
However it used the wrong base pointer for adding the terminator.
This led to a 0-byte being written somewhere beyond the buffer.
Use the correct base pointer when adding the terminator.
Fixes: f0e386ee0c0b ("printk: fix buffer overflow potential for print_text()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de
|
|
|
|
Before the commit 896fbe20b4e2333fb55 ("printk: use the lockless
ringbuffer"), msg_print_text() would only write up to size-1 bytes
into the provided buffer. Some callers expect this behavior and
append a terminator to returned string. In particular:
arch/powerpc/xmon/xmon.c:dump_log_buf()
arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout()
msg_print_text() has been replaced by record_print_text(), which
currently fills the full size of the buffer. This causes a
buffer overflow for the above callers.
Change record_print_text() so that it will only use size-1 bytes
for text data. Also, for paranoia sakes, add a terminator after
the text data.
And finally, document this behavior so that it is clear that only
size-1 bytes are used and a terminator is added.
Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de
|
|
kmsg_dump_get_buffer() uses @syslog to determine if the syslog
prefix should be written to the buffer. However, when calculating
the maximum number of records that can fit into the buffer, it
always counts the bytes from the syslog prefix.
Use @syslog when calculating the maximum number of records that can
fit into the buffer.
Fixes: e2ae715d66bf ("kmsg - kmsg_dump() use iterator to receive log buffer content")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113164413.1599-1-john.ogness@linutronix.de
|
|
Pull printk updates from Petr Mladek:
- Finally allow parallel writes and reads into/from the lockless
ringbuffer. But it is not a complete solution. Readers are still
serialized against each other. And nested writes are still prevented
by printk_safe per-CPU buffers.
- Use ttynull as the ultimate fallback for /dev/console.
- Officially allow disabling console output by using console="" or
console=null
- A few code cleanups
* tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: remove logbuf_lock writer-protection of ringbuffer
printk: inline log_output(),log_store() in vprintk_store()
printk: remove obsolete dead assignment
printk/console: Allow to disable console output by using console="" or console=null
init/console: Use ttynull as a fallback when there is no console
printk: ringbuffer: Reference text_data_ring directly in callees.
|
|
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
|
|
|
|
|
|
Since the ringbuffer is lockless, there is no need for it to be
protected by @logbuf_lock. Remove @logbuf_lock writer-protection of
the ringbuffer. The reader-protection is not removed because some
variables, used by readers, are using @logbuf_lock for synchronization:
@syslog_seq, @syslog_time, @syslog_partial, @console_seq,
struct kmsg_dumper.
For PRINTK_NMI_DIRECT_CONTEXT_MASK, @logbuf_lock usage is not removed
because it may be used for dumper synchronization.
Without @logbuf_lock synchronization of vprintk_store() it is no
longer possible to use the single static buffer for temporarily
sprint'ing the message. Instead, use vsnprintf() to determine the
length and perform the real vscnprintf() using the area reserved from
the ringbuffer. This leads to suboptimal packing of the message data,
but will result in less wasted storage than multiple per-cpu buffers
to support lockless temporary sprint'ing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201209004453.17720-3-john.ogness@linutronix.de
|
Linus Torvalds
Petr Mladek
Nicholas Piggin
Mike Rapoport
John Ogness
Yong-Taek Lee
Dmitry Safonov
Jonathan Corbet
Chris Down
Bhaskar Chowdhury
Rasmus Villemoes