aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/rcu/tiny_plugin.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-06-08rcu: Remove RCU CPU stall warnings from Tiny RCUPaul E. McKenney1-78/+0
Tiny RCU's job is to be tiny, so this commit removes its RCU CPU stall warning code. After this, there is no longer any need for rcu_sched_ctrlblk and rcu_bh_ctrlblk to be in tiny_plugin.h, so this commit also moves them to tiny.c. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-06-08rcu: Remove debugfs tracingPaul E. McKenney1-45/+0
RCU's debugfs tracing used to be the only reasonable low-level debug information available, but ftrace and event tracing has since surpassed the RCU debugfs level of usefulness. This commit therefore removes RCU's debugfs tracing. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-04-18srcu: Allow SRCU to access rcu_scheduler_activePaul E. McKenney1-4/+5
This is primarily a code-movement commit in preparation for allowing SRCU to handle early-boot SRCU grace periods. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-04-18rcu: Semicolon inside RCU_TRACE() for Tiny RCUPaul E. McKenney1-2/+2
The current use of "RCU_TRACE(statement);" can cause odd bugs, especially where "statement" is a local-variable declaration, as it can leave a misplaced ";" in the source code. This commit therefore converts these to "RCU_TRACE(statement;)", which avoids the misplaced ";". Reported-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-01-14rcu: Narrow early boot window of illegal synchronous grace periodsPaul E. McKenney1-2/+7
The current preemptible RCU implementation goes through three phases during bootup. In the first phase, there is only one CPU that is running with preemption disabled, so that a no-op is a synchronous grace period. In the second mid-boot phase, the scheduler is running, but RCU has not yet gotten its kthreads spawned (and, for expedited grace periods, workqueues are not yet running. During this time, any attempt to do a synchronous grace period will hang the system (or complain bitterly, depending). In the third and final phase, RCU is fully operational and everything works normally. This has been OK for some time, but there has recently been some synchronous grace periods showing up during the second mid-boot phase. This code worked "by accident" for awhile, but started failing as soon as expedited RCU grace periods switched over to workqueues in commit 8b355e3bc140 ("rcu: Drive expedited grace periods from workqueue"). Note that the code was buggy even before this commit, as it was subject to failure on real-time systems that forced all expedited grace periods to run as normal grace periods (for example, using the rcu_normal ksysfs parameter). The callchain from the failure case is as follows: early_amd_iommu_init() |-> acpi_put_table(ivrs_base); |-> acpi_tb_put_table(table_desc); |-> acpi_tb_invalidate_table(table_desc); |-> acpi_tb_release_table(...) |-> acpi_os_unmap_memory |-> acpi_os_unmap_iomem |-> acpi_os_map_cleanup |-> synchronize_rcu_expedited The kernel showing this callchain was built with CONFIG_PREEMPT_RCU=y, which caused the code to try using workqueues before they were initialized, which did not go well. This commit therefore reworks RCU to permit synchronous grace periods to proceed during this mid-boot phase. This commit is therefore a fix to a regression introduced in v4.9, and is therefore being put forward post-merge-window in v4.10. This commit sets a flag from the existing rcu_scheduler_starting() function which causes all synchronous grace periods to take the expedited path. The expedited path now checks this flag, using the requesting task to drive the expedited grace period forward during the mid-boot phase. Finally, this flag is updated by a core_initcall() function named rcu_exp_runtime_mode(), which causes the runtime codepaths to be used. Note that this arrangement assumes that tasks are not sent POSIX signals (or anything similar) from the time that the first task is spawned through core_initcall() time. Fixes: 8b355e3bc140 ("rcu: Drive expedited grace periods from workqueue") Reported-by: "Zheng, Lv" <lv.zheng@intel.com> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Stan Kain <stan.kain@gmail.com> Tested-by: Ivan <waffolz@hotmail.com> Tested-by: Emanuel Castelo <emanuel.castelo@gmail.com> Tested-by: Bruno Pesavento <bpesavento@infinito.it> Tested-by: Borislav Petkov <bp@suse.de> Tested-by: Frederic Bezies <fredbezies@gmail.com> Cc: <stable@vger.kernel.org> # 4.9.0-
2016-02-23rcu: Make rcu/tiny_plugin.h explicitly non-modularPaul Gortmaker1-13/+2
The Kconfig currently controlling compilation of this code is: init/Kconfig:config TINY_RCU init/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the code there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We could consider moving this to an earlier initcall (subsys?) if desired. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-05-27rcu: Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()Paul E. McKenney1-5/+7
This commit moves from the old ACCESS_ONCE() API to the new READ_ONCE() and WRITE_ONCE() APIs. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Updated to include kernel/torture.c as suggested by Jason Low. ]
2015-01-15Merge branches 'doc.2015.01.07a', 'fixes.2015.01.15a', 'preempt.2015.01.06a', 'srcu.2015.01.06a', 'stall.2015.01.16a' and 'torture.2015.01.11a' into HEADPaul E. McKenney1-5/+4
doc.2015.01.07a: Documentation updates. fixes.2015.01.15a: Miscellaneous fixes. preempt.2015.01.06a: Changes to handling of lists of preempted tasks. srcu.2015.01.06a: SRCU updates. stall.2015.01.16a: RCU CPU stall-warning updates and fixes. torture.2015.01.11a: RCU torture-test updates and fixes.
2015-01-15rcu: Fix RCU CPU stall detection in tiny implementationMiroslav Benes1-4/+3
The tiny RCU CPU stall detection depends on *rcp->curtail not being NULL. It is however a tail pointer and thus NULL by definition. Instead we should check rcp->rcucblist for the presence of pending callbacks which need to be processed. With this fix INFO about the stall is printed and jiffies_stall (jiffies at next stall) correctly updated. Note that the check for pending callback is necessary to avoid spurious warnings if there are no pendings callbacks. Signed-off-by: Miroslav Benes <mbenes@suse.cz> [ paulmck: Fused identical "if" statements, ported to -rcu. ] Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-06tiny_rcu: Directly force QS when call_rcu_[bh|sched]() on idle_taskLai Jiangshan1-1/+1
For RCU in UP, context-switch = QS = GP, thus we can force a context-switch when any call_rcu_[bh|sched]() is happened on idle_task. After doing so, rcu_idle/irq_enter/exit() are useless, so we can simply make these functions empty. More important, this change does not change the functionality logically. Note: raise_softirq(RCU_SOFTIRQ)/rcu_sched_qs() in rcu_idle_enter() and outmost rcu_irq_exit() will have to wake up the ksoftirqd (due to in_interrupt() == 0). Before this patch After this patch: call_rcu_sched() in idle; call_rcu_sched() in idle set resched do other stuffs; do other stuffs outmost rcu_irq_exit() outmost rcu_irq_exit() (empty function) (or rcu_idle_enter()) (or rcu_idle_enter(), also empty function) start to resched. (see above) rcu_sched_qs() rcu_sched_qs() QS,and GP and advance cb QS,and GP and advance cb wake up the ksoftirqd wake up the ksoftirqd set resched resched to ksoftirqd (or other) resched to ksoftirqd (or other) These two code patches are almost the same. Size changed after patched: size kernel/rcu/tiny-old.o kernel/rcu/tiny-patched.o text data bss dec hex filename 3449 206 8 3663 e4f kernel/rcu/tiny-old.o 2406 144 8 2558 9fe kernel/rcu/tiny-patched.o Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-04-29rcu: Protect uses of ->jiffies_stall with ACCESS_ONCE()Himangi Saraogi1-4/+4
Some of the accesses to the rcu_state structure's ->jiffies_stall field are unprotected. This patch protects them with ACCESS_ONCE(). The following coccinelle script was used to acheive this: /* coccinelle script to protect uses of ->jiffies_stall with ACCESS_ONCE() */ @@ identifier a; @@ ( ACCESS_ONCE(a->jiffies_stall) | - a->jiffies_stall + ACCESS_ONCE(a->jiffies_stall) ) Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-17rcu: Stop tracking FSF's postal addressPaul E. McKenney1-2/+2
All of the RCU source files have the usual GPL header, which contains a long-obsolete postal address for FSF. To avoid the need to track the FSF office's movements, this commit substitutes the URL where GPL may be found. Reported-by: Greg KH <gregkh@linuxfoundation.org> Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-10-15rcu: Move RCU-related source code to kernel/rcu directoryPaul E. McKenney1-0/+174
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Ingo Molnar <mingo@kernel.org>