| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull RCU updates from Paul McKenney:
- Miscellaneous fixes
- Torture-test updates for smp_call_function(), most notably improved
checking of module parameters.
- Tasks-trace RCU updates that fix a number of rare but important
race-condition bugs.
- Other torture-test updates, most notably better checking of module
parameters. In addition, rcutorture may once again be run on
CONFIG_PREEMPT_RT kernels.
- Torture-test scripting updates, most notably specifying the new
CONFIG_KCSAN_STRICT kconfig option rather than maintaining an
ever-changing list of individual KCSAN kconfig options.
* tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (46 commits)
rcu: Fix rcu_dynticks_curr_cpu_in_eqs() vs noinstr
rcu: Always inline rcu_dynticks_task*_{enter,exit}()
torture: Make kvm-remote.sh print size of downloaded tarball
torture: Allot 1G of memory for scftorture runs
tools/rcu: Add an extract-stall script
scftorture: Warn on individual scf_torture_init() error conditions
scftorture: Count reschedule IPIs
scftorture: Account for weight_resched when checking for all zeroes
scftorture: Shut down if nonsensical arguments given
scftorture: Allow zero weight to exclude an smp_call_function*() category
rcu: Avoid unneeded function call in rcu_read_unlock()
rcu-tasks: Update comments to cond_resched_tasks_rcu_qs()
rcu-tasks: Fix IPI failure handling in trc_wait_for_one_reader
rcu-tasks: Fix read-side primitives comment for call_rcu_tasks_trace
rcu-tasks: Clarify read side section info for rcu_tasks_rude GP primitives
rcu-tasks: Correct comparisons for CPU numbers in show_stalled_task_trace
rcu-tasks: Correct firstreport usage in check_all_holdout_tasks_trace
rcu-tasks: Fix s/rcu_add_holdout/trc_add_holdout/ typo in comment
rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop
rcu-tasks: Fix s/instruction/instructions/ typo in comment
...
|
|
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
|
|
fixes.2021.10.07a: Miscellaneous fixes.
scftorture.2021.09.16a: smp_call_function torture-test updates.
tasks.2021.09.15a: Tasks-trace RCU updates.
torture.2021.09.13b: Other torture-test updates.
torturescript.2021.09.16a: Torture-test scripting updates.
|
|
vmlinux.o: warning: objtool: rcu_nmi_enter()+0x36: call to __kasan_check_read() leaves .noinstr.text section
noinstr cannot have atomic_*() functions in because they're explicitly
annotated, use arch_atomic_*().
Fixes: 2be57f732889 ("rcu: Weaken ->dynticks accesses and updates")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
RCU managed to grow a few noinstr violations:
vmlinux.o: warning: objtool: rcu_dynticks_eqs_enter()+0x0: call to rcu_dynticks_task_trace_enter() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0xe: call to rcu_dynticks_task_trace_exit() leaves .noinstr.text section
Fix them by adding __always_inline to the relevant trivial functions.
Also replace the noinstr with __always_inline for the existing
rcu_dynticks_task_*() functions since noinstr would force noinline
them, even when empty, which seems silly.
Fixes: 7d0c9c50c5a1 ("rcu-tasks: Avoid IPIing userspace/idle tasks if kernel is so built")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Give try_invoke_on_locked_down_task() a saner name and have it return
an int so that the caller might distinguish between different reasons
of failure.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com> # on s390
Link: https://lkml.kernel.org/r/20210929152428.649944917@infradead.org
|
|
Comments in wait-type checks be improved by mentioning the
PREEPT_RT kernel configure option.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20210811025920.20751-1-zhouzhouyi@gmail.com
|
|
Since commit aa40c138cc8f3 ("rcu: Report QS for outermost PREEMPT=n
rcu_read_unlock() for strict GPs") the function rcu_read_unlock_strict()
is invoked by the inlined rcu_read_unlock() function. However,
rcu_read_unlock_strict() is an empty function in production kernels,
which are built with CONFIG_RCU_STRICT_GRACE_PERIOD=n.
There is a mention of rcu_read_unlock_strict() in the BPF verifier,
but this is in a deny-list, meaning that BPF does not care whether
rcu_read_unlock_strict() is ever called.
This commit therefore provides a slight performance improvement
by hoisting the check of CONFIG_RCU_STRICT_GRACE_PERIOD from
rcu_read_unlock_strict() into rcu_read_unlock(), thus avoiding the
pointless call to an empty function.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The cond_resched_rcu_qs() function no longer exists, despite being mentioned
several times in kernel/rcu/tasks.h. This commit therefore updates it to
the current cond_resched_tasks_rcu_qs().
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The trc_wait_for_one_reader() function is called at multiple stages
of trace rcu-tasks GP function, rcu_tasks_wait_gp():
- First, it is called as part of per task function -
rcu_tasks_trace_pertask(), for all non-idle tasks. As part of per task
processing, this function add the task in the holdout list and if the
task is currently running on a CPU, it sends IPI to the task's CPU.
The IPI handler takes action depending on whether task is in trace
rcu-tasks read side critical section or not:
- a. If the task is in trace rcu-tasks read side critical section
(t->trc_reader_nesting != 0), the IPI handler sets the task's
->trc_reader_special.b.need_qs, so that this task notifies exit
from its outermost read side critical section (by decrementing
trc_n_readers_need_end) to the GP handling function.
trc_wait_for_one_reader() also increments trc_n_readers_need_end,
so that the trace rcu-tasks GP handler function waits for this
task's read side exit notification. The IPI handler also sets
t->trc_reader_checked to true, and no further IPIs are sent for
this task, for this trace rcu-tasks grace period and this
task can be removed from holdout list.
- b. If the task is in the process of exiting its trace rcu-tasks
read side critical section, (t->trc_reader_nesting < 0), defer
this task's processing to future calls to trc_wait_for_one_reader().
- c. If task is not in rcu-task read side critical section,
t->trc_reader_nesting == 0, ->trc_reader_checked is set for this
task, so that this task is removed from holdout list.
- Second, trc_wait_for_one_reader() is called as part of post scan, in
function rcu_tasks_trace_postscan(), for all idle tasks.
- Third, in function check_all_holdout_tasks_trace(), this function is
called for each task in the holdout list, but only if there isn't
a pending IPI for the task (->trc_ipi_to_cpu == -1). This function
removed the task from holdout list, if IPI handler has completed the
required work, to ensure that the current trace rcu-tasks grace period
either waits for this task, or this task is not in a trace rcu-tasks
read side critical section.
Now, considering the scenario where smp_call_function_single() fails in
first case, inside rcu_tasks_trace_pertask(). In this case,
->trc_ipi_to_cpu is set to the current CPU for that task. This will
result in trc_wait_for_one_reader() getting skipped in third case,
inside check_all_holdout_tasks_trace(), for this task. This further
results in ->trc_reader_checked never getting set for this task,
and the task not getting removed from holdout list. This can cause
the current trace rcu-tasks grace period to stall.
Fix the above problem, by resetting ->trc_ipi_to_cpu to -1, on
smp_call_function_single() failure, so that future IPI calls can
be send for this task.
Note that all three of the trc_wait_for_one_reader() function's
callers (rcu_tasks_trace_pertask(), rcu_tasks_trace_postscan(),
check_all_holdout_tasks_trace()) hold cpu_read_lock(). This means
that smp_call_function_single() cannot race with CPU hotplug, and thus
should never fail. Therefore, also add a warning in order to report
any such failure in case smp_call_function_single() grows some other
reason for failure.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
call_rcu_tasks_trace() does have read-side primitives - rcu_read_lock_trace()
and rcu_read_unlock_trace(). Fix this information in the comments.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
RCU tasks rude variant does not check whether the current
running context on a CPU is usermode. Read side critical section ends
on transition to usermode execution, by the virtue of usermode
execution being schedulable. Clarify this in comments for
call_rcu_tasks_rude() and synchronize_rcu_tasks_rude().
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Valid CPU numbers can be zero or greater, but the checks for
->trc_ipi_to_cpu and tick_nohz_full_cpu()'s argument are for strictly
greater than. This commit therefore corrects the check for no_hz_full
cpu in show_stalled_task_trace() so as to include cpu 0.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In check_all_holdout_tasks_trace(), firstreport is a pointer argument;
so, check the dereferenced value, instead of checking the pointer.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Early in debugging, it made some sense to differentiate the first
iteration from subsequent iterations, but now this just causes confusion.
This commit therefore moves the "set_tasks_gp_state(rtp, RTGS_WAIT_CBS)"
statement to the beginning of the "for" loop in rcu_tasks_kthread().
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The second argument of rcu_read_unlock_trace_special() is always zero.
When called from exit_tasks_rcu_finish_trace(), it is the constant
zero, and rcu_read_unlock_trace_special() doesn't get called from
rcu_read_unlock_trace() unless the value of local variable "nesting"
is zero because in that case the early return is taken instead.
This commit therefore removes the "nesting" argument from the
rcu_read_unlock_trace_special() function, substituting the constant
zero within that function. This commit also adds a WARN_ON_ONCE()
to rcu_read_lock_trace_held() in case non-zeroness some day appears.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, trc_inspect_reader() treats a task exiting its RCU Tasks
Trace read-side critical section the same as being within that critical
section. However, this can fail because that task might have already
checked its .need_qs field, which means that it might never decrement
the all-important trc_n_readers_need_end counter. Of course, for that
to happen, the task would need to never again execute an RCU Tasks Trace
read-side critical section, but this really could happen if the system's
last trampoline was removed. Note that exit from such a critical section
cannot be treated as a quiescent state due to the possibility of nested
critical sections. This means that if trc_inspect_reader() sees a
negative nesting value, it must set up to try again later.
This commit therefore ignores tasks that are exiting their RCU Tasks
Trace read-side critical sections so that they will be rechecked later.
[ paulmck: Apply feedback from Neeraj Upadhyay and Boqun Feng. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, trc_wait_for_one_reader() atomically increments
the trc_n_readers_need_end counter before sending the IPI
invoking trc_read_check_handler(). All failure paths out of
trc_read_check_handler() and also from the smp_call_function_single()
within trc_wait_for_one_reader() must carefully atomically decrement
this counter. This is more complex than it needs to be.
This commit therefore simplifies things and saves a few lines of
code by dispensing with the atomic decrements in favor of having
trc_read_check_handler() do the atomic increment only in the success case.
In theory, this represents no change in functionality.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
rcutorture is generating some nesting scenarios that are not compatible on PREEMPT_RT.
For example:
preempt_disable();
rcu_read_lock_bh();
preempt_enable();
rcu_read_unlock_bh();
The problem here is that on PREEMPT_RT the bottom halves have to be
disabled and enabled in preemptible context.
Reorder locking: start with BH locking and continue with then with
disabling preemption or interrupts. In the unlocking do it reverse by
first enabling interrupts and preemption and BH at the very end.
Ensure that on PREEMPT_RT BH locking remains unchanged if in
non-preemptible context.
Link: https://lkml.kernel.org/r/20190911165729.11178-6-swood@redhat.com
Link: https://lkml.kernel.org/r/20210819182035.GF4126399@paulmck-ThinkPad-P17-Gen-1
Signed-off-by: Scott Wood <swood@redhat.com>
[bigeasy: Drop ATOM_BH, make it only about changing BH in atomic
context. Allow enabling RCU in IRQ-off section. Reword commit message.]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, in CONFIG_RCU_BOOST kernels, if the rcu_torture_init()
function's call to cpuhp_setup_state() fails, rcu_torture_cleanup()
gamely passes nonsense to cpuhp_remove_state(). This results in
strange and misleading splats. This commit therefore ensures that if
the rcu_torture_init() function's call to cpuhp_setup_state() fails,
rcu_torture_cleanup() avoids invoking cpuhp_remove_state().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When running rcuscale as a module, any rcu_scale_init() issues will be
reflected in the error code from modprobe or insmod, as the case may be.
However, these error codes are not available when running rcuscale
built-in, for example, when using the kvm.sh script. This commit
therefore adds WARN_ON_ONCE() to allow distinguishing rcu_scale_init()
errors when running rcuscale built-in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When running refscale as a module, any ref_scale_init() issues will be
reflected in the error code from modprobe or insmod, as the case may be.
However, these error codes are not available when running refscale
built-in, for example, when using the kvm.sh script. This commit
therefore adds WARN_ON_ONCE() to allow distinguishing ref_scale_init()
errors when running refscale built-in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When running rcutorture as a module, any rcu_torture_init() issues will be
reflected in the error code from modprobe or insmod, as the case may be.
However, these error codes are not available when running rcutorture
built-in, for example, when using the kvm.sh script. This commit
therefore adds WARN_ON_ONCE() to allow distinguishing rcu_torture_init()
errors when running rcutorture built-in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, specifying the rcutorture.read_exit_burst=0 kernel boot
parameter will result in a -EINVAL exit code that will stop the rcutorture
test run before it has fully initialized. This commit therefore uses a
zero exit code in that case, thus allowing rcutorture.read_exit_burst=0
to complete normally.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, RCU Tasks Trace initializes the trc_n_readers_need_end counter
to the value one, increments it before each trc_read_check_handler()
IPI, then decrements it within trc_read_check_handler() if the target
task was in a quiescent state (or if the target task moved to some other
CPU while the IPI was in flight), complaining if the new value was zero.
The rationale for complaining is that the initial value of one must be
decremented away before zero can be reached, and this decrement has not
yet happened.
Except that trc_read_check_handler() is initiated with an asynchronous
smp_call_function_single(), which might be significantly delayed. This
can result in false-positive complaints about the counter reaching zero.
This commit therefore waits for in-flight IPI handlers to complete before
decrementing away the initial value of one from the trc_n_readers_need_end
counter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The sync_sched_exp_online_cleanup() checks to see if RCU needs
an expedited quiescent state from the incoming CPU, sending it
an IPI if so. Before sending IPI, it checks whether expedited
qs need has been already requested for the incoming CPU, by
checking rcu_data.cpu_no_qs.b.exp for the current cpu, on which
sync_sched_exp_online_cleanup() is running. This works for the
case where incoming CPU is same as self. However, for the case
where incoming CPU is different from self, expedited request
won't get marked, which can potentially delay reporting of
expedited quiescent state for the incoming CPU.
Fixes: e015a3411220 ("rcu: Avoid self-IPI in sync_sched_exp_online_cleanup()")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
rcu update module parameters currently don't appear in sysfs and this is
a serviceability issue as it might be needed to access their default
values at runtime.
Fix this issue by changing rcu update module parameters permissions to
world-readable.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Certain configurations (e.g., systems that make heavy use of netns)
need to use synchronize_rcu_expedited() to service RCU grace periods
even after boot.
Even though synchronize_rcu_expedited() has been traditionally
considered harmful for RT for the heavy use of IPIs, it is perfectly
usable under certain conditions (e.g. nohz_full).
Make rcupdate.rcu_normal_after_boot= again writeable on RT (if NO_HZ_
FULL is defined), but keep its default value to 1 (enabled) to avoid
regressions. Users who need synchronize_rcu_expedited() will boot with
rcupdate.rcu_normal_after_ boot=0 in the kernel cmdline.
Reflect the change in synchronize_rcu_expedited_wait() by removing the
WARN related to CONFIG_PREEMPT_RT.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The CPU-hotplug functions take a "cpu" parameter, but rcutree_dying_cpu()
ignores it in favor of this_cpu_ptr(). This works at the moment, but
it would be better to be consistent. This might also work better given
some possible future changes. This commit therefore uses per_cpu_ptr()
to avoid ignoring the rcutree_dying_cpu() function's argument.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcu_report_dead() disables preemption across its call to
rcu_report_exp_rdp(), but this is pointless because interrupts are
already disabled by the caller. In addition, rcu_report_dead() computes
the address of the outgoing CPU's rcu_data structure, which is also
pointless because this address is already present in local variable rdp.
This commit therefore drops the preemption disabling and passes rdp
to rcu_report_exp_rdp().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The purpose of rcu_dynticks_eqs_online() is to adjust the ->dynticks
counter of an incoming CPU when required. It is currently invoked
from rcutree_prepare_cpu(), which runs before the incoming CPU is
running, and thus on some other CPU. This makes the per-CPU accesses in
rcu_dynticks_eqs_online() iffy at best, and it all "works" only because
the running CPU cannot possibly be in dyntick-idle mode, which means
that rcu_dynticks_eqs_online() never has any effect.
It is currently OK for rcu_dynticks_eqs_online() to have no effect, but
only because the CPU-offline process just happens to leave ->dynticks in
the correct state. After all, if ->dynticks were in the wrong state on a
just-onlined CPU, rcutorture would complain bitterly the next time that
CPU went idle, at least in kernels built with CONFIG_RCU_EQS_DEBUG=y,
for example, those built by rcutorture scenario TREE04. One could
argue that this means that rcu_dynticks_eqs_online() is unnecessary,
however, removing it would make the CPU-online process vulnerable to
slight changes in the CPU-offline process.
One could also ask why it is safe to move the rcu_dynticks_eqs_online()
call so late in the CPU-online process. Indeed, there was a time when it
would not have been safe, which does much to explain its current location.
However, the marking of a CPU as online from an RCU perspective has long
since moved from rcutree_prepare_cpu() to rcu_cpu_starting(), and all
that is required is that ->dynticks be set correctly by the time that
the CPU is marked as online from an RCU perspective. After all, the RCU
grace-period kthread does not check to see if offline CPUs are also idle.
(In case you were curious, this is one reason why there is quiescent-state
reporting as part of the offlining process.)
This commit therefore moves the call to rcu_dynticks_eqs_online() from
rcutree_prepare_cpu() to rcu_cpu_starting(), this latter being guaranteed
to be running on the incoming CPU. The call to this function must of
course be placed before this rcu_cpu_starting() announces this CPU's
presence to RCU.
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Near the beginning of rcu_gp_init() is a per-rcu_node loop that waits
for CPU-hotplug operations that might have started before the new
grace period did. This commit adds a comment explaining that this
wait does not exclude CPU-hotplug operations.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Invoking scripts/checkkconfigsymbols.py in the Linux-kernel source tree
located the following issues:
1. TREE_PREEMPT_RCU
Referencing files: arch/sh/configs/sdk7786_defconfig
It should now be CONFIG_PREEMPT_RCU. Except that the CONFIG_PREEMPT=y in
that same file implies CONFIG_PREEMPT_RCU=y. Therefore, delete the
CONFIG_TREE_PREEMPT_RCU=y line.
The reason is as follows:
In kernel/rcu/Kconfig, we have
config PREEMPT_RCU
bool
default y if PREEMPTION
https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt says,
"The default value is only assigned to the config symbol if no other value
was set by the user (via the input prompt above)."
there is no prompt in config PREEMPT_RCU entry, so we are guaranteed to
get CONFIG_PREEMPT_RCU=y when CONFIG_PREEMPT is present.
2. RCU_CPU_STALL_INFO
Referencing files: arch/xtensa/configs/nommu_kc705_defconfig
The old Kconfig option RCU_CPU_STALL_INFO was removed by commit
75c27f119b64 ("rcu: Remove CONFIG_RCU_CPU_STALL_INFO"), and the kernel
now acts as if this Kconfig option was unconditionally enabled.
3. RCU_NOCB_CPU_ALL
Referencing files:
Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
This is an old snapshot of the code. I update this from the real
rcu_prepare_for_idle() function in kernel/rcu/tree_plugin.h.
This change was tested by invoking "make htmldocs".
4. RCU_TORTURE_TESTS
Referencing files: kernel/rcu/rcutorture.c
Forward-progress checking conflicts with CPU-stall testing, so we should
complain at "modprobe rcutorture" when both are enabled.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_implicit_dynticks_qs() function's local variable ruqp references
the ->rcu_urgent_qs field in the rcu_data structure referenced by the
function parameter rdp, with a rather odd method for computing the
pointer to this field. This commit therefore simplifies things and
saves a couple of lines of code by replacing each instance of ruqp with
&rdp->need_heavy_qs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_implicit_dynticks_qs() function's local variable rnhqp references
the ->rcu_need_heavy_qs field in the rcu_data structure referenced by
the function parameter rdp, with a rather odd method for computing
the pointer to this field. This commit therefore simplifies things
and saves a few lines of code by replacing each instance of rnhqp with
&rdp->need_heavy_qs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit removes a non-value-returning "return" statement at the end
of __call_rcu_nocb_wake() and adds a blank line following declarations
in nocb_cb_can_run().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit marks accesses to the rcu_state.n_force_qs. These data
races are hard to make happen, but syzkaller was equal to the task.
Reported-by: syzbot+e08a83a1940ec3846cd5@syzkaller.appspotmail.com
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Pull locking and atomics updates from Thomas Gleixner:
"The regular pile:
- A few improvements to the mutex code
- Documentation updates for atomics to clarify the difference between
cmpxchg() and try_cmpxchg() and to explain the forward progress
expectations.
- Simplification of the atomics fallback generator
- The addition of arch_atomic_long*() variants and generic arch_*()
bitops based on them.
- Add the missing might_sleep() invocations to the down*() operations
of semaphores.
The PREEMPT_RT locking core:
- Scheduler updates to support the state preserving mechanism for
'sleeping' spin- and rwlocks on RT.
This mechanism is carefully preserving the state of the task when
blocking on a 'sleeping' spin- or rwlock and takes regular wake-ups
targeted at the same task into account. The preserved or updated
(via a regular wakeup) state is restored when the lock has been
acquired.
- Restructuring of the rtmutex code so it can be utilized and
extended for the RT specific lock variants.
- Restructuring of the ww_mutex code to allow sharing of the ww_mutex
specific functionality for rtmutex based ww_mutexes.
- Header file disentangling to allow substitution of the regular lock
implementations with the PREEMPT_RT variants without creating an
unmaintainable #ifdef mess.
- Shared base code for the PREEMPT_RT specific rw_semaphore and
rwlock implementations.
Contrary to the regular rw_semaphores and rwlocks the PREEMPT_RT
implementation is writer unfair because it is infeasible to do
priority inheritance on multiple readers. Experience over the years
has shown that real-time workloads are not the typical workloads
which are sensitive to writer starvation.
The alternative solution would be to allow only a single reader
which has been tried and discarded as it is a major bottleneck
especially for mmap_sem. Aside of that many of the writer
starvation critical usage sites have been converted to a writer
side mutex/spinlock and RCU read side protections in the past
decade so that the issue is less prominent than it used to be.
- The actual rtmutex based lock substitutions for PREEMPT_RT enabled
kernels which affect mutex, ww_mutex, rw_semaphore, spinlock_t and
rwlock_t. The spin/rw_lock*() functions disable migration across
the critical section to preserve the existing semantics vs per-CPU
variables.
- Rework of the futex REQUEUE_PI mechanism to handle the case of
early wake-ups which interleave with a re-queue operation to
prevent the situation that a task would be blocked on both the
rtmutex associated to the outer futex and the rtmutex based hash
bucket spinlock.
While this situation cannot happen on !RT enabled kernels the
changes make the underlying concurrency problems easier to
understand in general. As a result the difference between !RT and
RT kernels is reduced to the handling of waiting for the critical
section. !RT kernels simply spin-wait as before and RT kernels
utilize rcu_wait().
- The substitution of local_lock for PREEMPT_RT with a spinlock which
protects the critical section while staying preemptible. The CPU
locality is established by disabling migration.
The underlying concepts of this code have been in use in PREEMPT_RT for
way more than a decade. The code has been refactored several times over
the years and this final incarnation has been optimized once again to be
as non-intrusive as possible, i.e. the RT specific parts are mostly
isolated.
It has been extensively tested in the 5.14-rt patch series and it has
been verified that !RT kernels are not affected by these changes"
* tag 'locking-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (92 commits)
locking/rtmutex: Return success on deadlock for ww_mutex waiters
locking/rtmutex: Prevent spurious EDEADLK return caused by ww_mutexes
locking/rtmutex: Dequeue waiter on ww_mutex deadlock
locking/rtmutex: Dont dereference waiter lockless
locking/semaphore: Add might_sleep() to down_*() family
locking/ww_mutex: Initialize waiter.ww_ctx properly
static_call: Update API documentation
locking/local_lock: Add PREEMPT_RT support
locking/spinlock/rt: Prepare for RT local_lock
locking/rtmutex: Add adaptive spinwait mechanism
locking/rtmutex: Implement equal priority lock stealing
preempt: Adjust PREEMPT_LOCK_OFFSET for RT
locking/rtmutex: Prevent lockdep false positive with PI futexes
futex: Prevent requeue_pi() lock nesting issue on RT
futex: Simplify handle_early_requeue_pi_wakeup()
futex: Reorder sanity checks in futex_requeue()
futex: Clarify comment in futex_requeue()
futex: Restructure futex_requeue()
futex: Correct the number of requeued waiters for PI
futex: Remove bogus condition for requeue PI
...
|
|
RT builds substitutions for rwsem, mutex, spinlock and rwlock around
rtmutexes. Split the inner working out so each lock substitution can use
them with the appropriate lockdep annotations. This avoids having an extra
unused lockdep map in the wrapped rtmutex.
No functional change.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211302.784739994@linutronix.de
|
|
doc.2021.07.20c: Documentation updates.
fixes.2021.08.06a: Miscellaneous fixes.
nocb.2021.07.20c: Callback-offloading (NOCB CPU) updates.
nolibc.2021.07.20c: Tiny userspace library updates.
tasks.2021.07.20c: Tasks RCU updates.
torture.2021.07.27a: In-kernel torture-test updates.
torturescript.2021.07.27a: Torture-test scripting updates.
|
|
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: rcu@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The WARN_ON_ONCE() invocation within the CONFIG_PREEMPT=y version of
rcu_note_context_switch() triggers when there is a voluntary context
switch in an RCU read-side critical section, but there is quite a gap
between the output of that WARN_ON_ONCE() and this RCU-usage error.
This commit therefore converts the WARN_ON_ONCE() to a WARN_ONCE()
that explicitly describes the problem in its message.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There are a few remaining locations in kernel/rcu that still use
"&per_cpu()". This commit replaces them with "per_cpu_ptr(&)", and does
not introduce any functional change.
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Within rcu_gp_fqs_loop(), the "ret" local variable is set to the
return value from swait_event_idle_timeout_exclusive(), but "ret" is
unconditionally overwritten later in the code. This commit therefore
removes this useless assignment.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit marks the accesses in tree_stall.h so as to both avoid
undesirable compiler optimizations and to keep KCSAN focused on the
accesses of the core algorithm.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The kbuild test project found an oversized stack frame in rcu_gp_kthread()
for some kernel configurations. This oversizing was due to a very large
amount of inlining, which is unnecessary due to the fact that this code
executes infrequently. This commit therefore marks rcu_gp_init() and
rcu_gp_fqs_loop noinline_for_stack to conserve stack space.
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Rong Chen <rong.a.chen@intel.com>
[ paulmck: noinline_for_stack per Nathan Chancellor. ]
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Accesses to ->qsmask are normally protected by ->lock, but there is an
exception in the diagnostic code in rcu_check_boost_fail(). This commit
therefore applies data_race() to this access to avoid KCSAN complaining
about the C-language writes protected by ->lock.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit marks some interrupt-induced read-side data races in
__srcu_read_lock(), __srcu_read_unlock(), and srcu_torture_stats_print().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
Linus Torvalds
Paul E. McKenney
Peter Zijlstra
Zhouyi Zhou
Waiman Long
Neeraj Upadhyay
Scott Wood
Juri Lelli
Sebastian Andrzej Siewior
Liu Song