| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
First, number of CPUs can't be negative number.
Second, different signnnedness leads to suboptimal code in the following
cases:
1)
kmalloc(nr_cpu_ids * sizeof(X));
"int" has to be sign extended to size_t.
2)
while (loff_t *pos < nr_cpu_ids)
MOVSXD is 1 byte longed than the same MOV.
Other cases exist as well. Basically compiler is told that nr_cpu_ids
can't be negative which can't be deduced if it is "int".
Code savings on allyesconfig kernel: -3KB
add/remove: 0/0 grow/shrink: 25/264 up/down: 261/-3631 (-3370)
function old new delta
coretemp_cpu_online 450 512 +62
rcu_init_one 1234 1272 +38
pci_device_probe 374 399 +25
...
pgdat_reclaimable_pages 628 556 -72
select_fallback_rq 446 369 -77
task_numa_find_cpu 1923 1807 -116
Link: http://lkml.kernel.org/r/20170819114959.GA30580@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
doc.2017.08.17a: Documentation updates.
fixes.2017.08.17a: RCU fixes.
hotplug.2017.07.25b: CPU-hotplug updates.
misc.2017.08.17a: Miscellaneous fixes outside of RCU (give or take conflicts).
spin_unlock_wait_no.2017.08.17a: Remove spin_unlock_wait().
srcu.2017.07.27c: SRCU updates.
torture.2017.07.24c: Torture-test updates.
|
|
The rcu_idle_exit() and rcu_idle_enter() functions are exported because
they were originally used by RCU_NONIDLE(), which was intended to
be usable from modules. However, RCU_NONIDLE() now instead uses
rcu_irq_enter_irqson() and rcu_irq_exit_irqson(), which are not
exported, and there have been no complaints.
This commit therefore removes the exports from rcu_idle_exit() and
rcu_idle_enter().
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
All current callers of rcu_idle_enter() have irqs disabled, and
rcu_idle_enter() relies on this, but doesn't check. This commit
therefore adds a RCU_LOCKDEP_WARN() to add some verification to the trust.
While we are there, pass "true" rather than "1" to rcu_eqs_enter().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
All callers to rcu_idle_enter() have irqs disabled, so there is no
point in rcu_idle_enter disabling them again. This commit therefore
replaces the irq disabling with a RCU_LOCKDEP_WARN().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit adds assertions verifying the consistency of the rcu_node
structure's ->blkd_tasks list and its ->gp_tasks, ->exp_tasks, and
->boost_tasks pointers. In particular, the ->blkd_tasks lists must be
empty except for leaf rcu_node structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Set disable_rcu_irq_enter on not only rcu_eqs_enter_common() but also
rcu_eqs_exit(), since rcu_eqs_exit() suffers from the same issue as was
fixed for rcu_eqs_enter_common() by commit 03ecd3f48e57 ("rcu/tracing:
Add rcu_disabled to denote when rcu_irq_enter() will not work").
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The _rcu_barrier_trace() function is a wrapper for trace_rcu_barrier(),
which needs TPS() protection for strings passed through the second
argument. However, it has escaped prior TPS()-ification efforts because
it _rcu_barrier_trace() does not start with "trace_". This commit
therefore adds the needed TPS() protection
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
These RCU waits were set to use interruptible waits to avoid the kthreads
contributing to system load average, even though they are not interruptible
as they are spawned from a kthread. Use the new TASK_IDLE swaits which makes
our goal clear, and removes confusion about these paths possibly being
interruptible -- they are not.
When the system is idle the RCU grace-period kthread will spend all its time
blocked inside the swait_event_interruptible(). If the interruptible() was
not used, then this kthread would contribute to the load average. This means
that an idle system would have a load average of 2 (or 3 if PREEMPT=y),
rather than the load average of 0 that almost fifty years of UNIX has
conditioned sysadmins to expect.
The same argument applies to swait_event_interruptible_timeout() use. The
RCU grace-period kthread spends its time blocked inside this call while
waiting for grace periods to complete. In particular, if there was only one
busy CPU, but that CPU was frequently invoking call_rcu(), then the RCU
grace-period kthread would spend almost all its time blocked inside the
swait_event_interruptible_timeout(). This would mean that the load average
would be 2 rather than the expected 1 for the single busy CPU.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
There is currently event tracing to track when a task is preempted
within a preemptible RCU read-side critical section, and also when that
task subsequently reaches its outermost rcu_read_unlock(), but none
indicating when a new grace period starts when that grace period must
wait on pre-existing readers that have been been preempted at least once
since the beginning of their current RCU read-side critical sections.
This commit therefore adds an event trace at grace-period start in
the case where there are such readers. Note that only the first
reader in the list is traced.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This commit saves a few lines in kernel/rcu/rcu.h by moving to single-line
definitions for trivial functions, instead of the old style where the
two curly braces each get their own line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Strings used in event tracing need to be specially handled, for example,
using the TPS() macro. Without the TPS() macro, although output looks
fine from within a running kernel, extracting traces from a crash dump
produces garbage instead of strings. This commit therefore adds the TPS()
macro to some unadorned strings that were passed to event-tracing macros.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Currently, the exit-time support for TASKS_RCU is open-coded in do_exit().
This commit creates exit_tasks_rcu_start() and exit_tasks_rcu_finish()
APIs for do_exit() use. This has the benefit of confining the use of the
tasks_rcu_exit_srcu variable to one file, allowing it to become static.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The actual use of TASKS_RCU is only when PREEMPT, otherwise RCU-sched
is used instead. This commit therefore makes synchronize_rcu_tasks()
and call_rcu_tasks() available always, but mapped to synchronize_sched()
and call_rcu_sched(), respectively, when !PREEMPT. This approach also
allows some #ifdefs to be removed from rcutorture.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
|
Tree RCU guarantees that every online CPU has a memory barrier between
any given grace period and any of that CPU's RCU read-side sections that
must be ordered against that grace period. Since RCU doesn't always
know where read-side critical sections are, the actual implementation
guarantees order against prior and subsequent non-idle non-offline code,
whether in an RCU read-side critical section or not. As a result, there
does not need to be a memory barrier at the end of synchronize_rcu()
and friends because the ordering internal to the grace period has
ordered every CPU's post-grace-period execution against each CPU's
pre-grace-period execution, again for all non-idle online CPUs.
In contrast, SRCU can have non-idle online CPUs that are completely
uninvolved in a given SRCU grace period, for example, a CPU that
never runs any SRCU read-side critical sections and took no part in
the grace-period processing. It is in theory possible for a given
synchronize_srcu()'s wakeup to be delivered to a CPU that was completely
uninvolved in the prior SRCU grace period, which could mean that the
code following that synchronize_srcu() would end up being unordered with
respect to both the grace period and any pre-existing SRCU read-side
critical sections.
This commit therefore adds an smp_mb() to the end of __synchronize_srcu(),
which prevents this scenario from occurring.
Reported-by: Lance Roy <ldr709@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Lance Roy <ldr709@gmail.com>
Cc: <stable@vger.kernel.org> # 4.12.x
|
|
After adopting callbacks from a newly offlined CPU, the adopting CPU
checks to make sure that its callback list's count is zero only if the
list has no callbacks and vice versa. Unfortunately, it does so after
enabling interrupts, which means that false positives are possible due to
interrupt handlers invoking call_rcu(). Although these false positives
are improbable, rcutorture did make it happen once.
This commit therefore moves this check to an irq-disabled region of code,
thus suppressing the false positive.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Given changes to callback migration, rcu_cblist_head(),
rcu_cblist_tail(), rcu_cblist_count_cbs(), rcu_segcblist_segempty(),
rcu_segcblist_dequeued_lazy(), and rcu_segcblist_new_cbs() are
no longer used. This commit therefore removes them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Given that the rcu_state structure's >orphan_pend and ->orphan_done
fields are used only during migration of callbacks from the recently
offlined CPU to a surviving CPU, if rcu_send_cbs_to_orphanage() and
rcu_adopt_orphan_cbs() are combined, these fields can become local
variables in the combined function. This commit therefore combines
rcu_send_cbs_to_orphanage() and rcu_adopt_orphan_cbs() into a new
rcu_segcblist_merge() function and removes the ->orphan_pend and
->orphan_done fields.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
When migrating callbacks from a newly offlined CPU, we are already
holding the root rcu_node structure's lock, so it costs almost nothing
to advance and accelerate the newly migrated callbacks. This patch
therefore makes this advancing and acceleration happen.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The ->orphan_lock is acquired and released only within the
rcu_migrate_callbacks() function, which now acquires the root rcu_node
structure's ->lock. This commit therefore eliminates the ->orphan_lock
in favor of the root rcu_node structure's ->lock.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
It is possible that the outgoing CPU is unaware of recent grace periods,
and so it is also possible that some of its pending callbacks are actually
ready to be invoked. The current callback-migration code would needlessly
force these callbacks to pass through another grace period. This commit
therefore invokes rcu_advance_cbs() on the outgoing CPU's callbacks in
order to give them full credit for having passed through any recent
grace periods.
This also fixes an odd theoretical bug where there are no callbacks in
the system except for those on the outgoing CPU, none of those callbacks
have yet been associated with a grace-period number, there is never again
another callback registered, and the surviving CPU never again takes a
scheduling-clock interrupt, never goes idle, and never enters nohz_full
userspace execution. Yes, this is (just barely) possible. It requires
that the surviving CPU be a nohz_full CPU, that its scheduler-clock
interrupt be shut off, and that it loop forever in the kernel. You get
bonus points if you can make this one happen! ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
RCU's CPU-hotplug callback-migration code first moves the outgoing
CPU's callbacks to ->orphan_done and ->orphan_pend, and only then
moves them to the NOCB callback list. This commit avoids the
extra step (and simplifies the code) by moving the callbacks directly
from the outgoing CPU's callback list to the NOCB callback list.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The current CPU-hotplug RCU-callback-migration code checks
for the source (newly offlined) CPU being a NOCBs CPU down in
rcu_send_cbs_to_orphanage(). This commit simplifies callback migration a
bit by moving this check up to rcu_migrate_callbacks(). This commit also
adds a check for the source CPU having no callbacks, which eases analysis
of the rcu_send_cbs_to_orphanage() and rcu_adopt_orphan_cbs() functions.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The rcu_node structure's ->n_cbs_orphaned and ->n_cbs_adopted fields
are updated, but never read. This commit therefore removes them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The update of the ->expmaskinitnext and of ->ncpus are unsynchronized,
with the value of ->ncpus being incremented long before the corresponding
->expmaskinitnext mask is updated. If an RCU expedited grace period
sees ->ncpus change, it will update the ->expmaskinit masks from the new
->expmaskinitnext masks. But it is possible that ->ncpus has already
been updated, but the ->expmaskinitnext masks still have their old values.
For the current expedited grace period, no harm done. The CPU could not
have been online before the grace period started, so there is no need to
wait for its non-existent pre-existing readers.
But the next RCU expedited grace period is in a world of hurt. The value
of ->ncpus has already been updated, so this grace period will assume
that the ->expmaskinitnext masks have not changed. But they have, and
they won't be taken into account until the next never-been-online CPU
comes online. This means that RCU will be ignoring some CPUs that it
should be paying attention to.
The solution is to update ->ncpus and ->expmaskinitnext while holding
the ->lock for the rcu_node structure containing the ->expmaskinitnext
mask. Because smp_store_release() is now used to update ->ncpus and
smp_load_acquire() is now used to locklessly read it, if the expedited
grace period sees ->ncpus change, then the updating CPU has to
already be holding the corresponding ->lock. Therefore, when the
expedited grace period later acquires that ->lock, it is guaranteed
to see the new value of ->expmaskinitnext.
On the other hand, if the expedited grace period loads ->ncpus just
before an update, earlier full memory barriers guarantee that
the incoming CPU isn't far enough along to be running any RCU readers.
This commit therefore makes the required change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
RCU callbacks must be migrated away from an outgoing CPU, and this is
done near the end of the CPU-hotplug operation, after the outgoing CPU is
long gone. Unfortunately, this means that other CPU-hotplug callbacks
can execute while the outgoing CPU's callbacks are still immobilized
on the long-gone CPU's callback lists. If any of these CPU-hotplug
callbacks must wait, either directly or indirectly, for the invocation
of any of the immobilized RCU callbacks, the system will hang.
This commit avoids such hangs by migrating the callbacks away from the
outgoing CPU immediately upon its departure, shortly after the return
from __cpu_die() in takedown_cpu(). Thus, RCU is able to advance these
callbacks and invoke them, which allows all the after-the-fact CPU-hotplug
callbacks to wait on these RCU callbacks without risk of a hang.
While in the neighborhood, this commit also moves rcu_send_cbs_to_orphanage()
and rcu_adopt_orphan_cbs() under a pre-existing #ifdef to avoid including
dead code on the one hand and to avoid define-without-use warnings on the
other hand.
Reported-by: Jeffrey Hugo <jhugo@codeaurora.org>
Link: http://lkml.kernel.org/r/db9c91f6-1b17-6136-84f0-03c3c2581ab4@codeaurora.org
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Richard Weinberger <richard@nod.at>
|
|
The handling of RCU's no-CBs CPUs has a maintenance headache, namely
that if call_rcu() is invoked with interrupts disabled, the rcuo kthread
wakeup must be defered to a point where we can be sure that scheduler
locks are not held. Of course, there are a lot of code paths leading
from an interrupts-disabled invocation of call_rcu(), and missing any
one of these can result in excessive callback-invocation latency, and
potentially even system hangs.
This commit therefore uses a timer to guarantee that the wakeup will
eventually occur. If one of the deferred-wakeup points kicks in, then
the timer is simply cancelled.
This commit also fixes up an incomplete removal of commits that were
intended to plug remaining exit paths, which should have the added
benefit of reducing the overhead of RCU's context-switch hooks. In
addition, it simplifies leader-to-follower callback-list handoff by
introducing locking. The call_rcu()-to-leader handoff continues to
use atomic operations in order to maintain good real-time latency for
common-case use of call_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Dan Carpenter fix for mod_timer() usage bug found by smatch. ]
|
|
The Linux kernel invokes call_rcu() from various interrupt/softirq
handlers, but rcutorture does not. This commit therefore adds this
behavior to rcutorture's repertoire.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit augments the grace-period-kthread starvation debugging
messages by adding the last CPU that ran the kthread.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit removes an unused local variable named ts_rem that is
marked __maybe_unused. Yes, the variable was assigned to, but it
was never used beyond that point, hence not needed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
It appears that at least some of the rcutorture writer stall messages
coincide with unusually long CPU-online operations, for example, no
fewer than 205 seconds in a recent test. It is of course possible that
the writer stall is not unrelated to this unusually long CPU-hotplug
operation, and so this commit adds the rcutorture writer task's CPU to
the stall message to gain more information about this possible connection.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Strings used in event tracing need to be specially handled, for example,
being copied to the trace buffer instead of being pointed to by the trace
buffer. Although the TPS() macro can be used to "launder" pointed-to
strings, this might not be all that effective within a loadable module.
This commit therefore copies rcutorture's strings to the trace buffer.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
|
|
Now that it is legal to invoke srcu_read_lock() and srcu_read_unlock()
for a given srcu_struct from both process context and {soft,}irq
handlers, it is time to test it. This commit therefore enables
testing of SRCU readers from rcutorture's timer handler, using in_task()
to determine whether or not it is safe to sleep in the SRCU read-side
critical sections.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The synchronize_rcu_tasks() and call_rcu_tasks() APIs are now available
regardless of kernel configuration, so this commit removes the
CONFIG_TASKS_RCU ifdef from rcuperf.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit adds printing of SRCU lock/unlock totals, which are just
the sums of the per-CPU counts. Saves a bit of mental arithmetic.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit gets rid of some ugly #ifdefs in rcutorture.c by moving
the SRCU status printing to the SRCU implementations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The function process_srcu() is not invoked outside of srcutree.c, so
this commit makes it static and drops the EXPORT_SYMBOL_GPL().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Other than lockdep support, Tiny RCU has no need for the
scheduler status. However, Tiny SRCU will need this to control
boot-time behavior independent of lockdep. Therefore, this commit
moves rcu_scheduler_starting() from kernel/rcu/tiny_plugin.h to
kernel/rcu/srcutiny.c. This in turn allows the complete removal of
kernel/rcu/tiny_plugin.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Tiny RCU's job is to be tiny, so this commit removes its RCU CPU
stall warning code. After this, there is no longer any need for
rcu_sched_ctrlblk and rcu_bh_ctrlblk to be in tiny_plugin.h, so this
commit also moves them to tiny.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit saves a few lines by getting rid of Tiny RCU's event tracing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
RCU's debugging Kconfig options are in the unintuitive location
lib/Kconfig.debug, and there are enough of them that it would be good for
them to be more centralized. This commit therefore extracts RCU's Kconfig
options from init/Kconfig into a new kernel/rcu/Kconfig.debug file.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
RCU's Kconfig options are scattered, and there are enough of them
that it would be good for them to be more centralized. This commit
therefore extracts RCU's Kconfig options from init/Kconfig into a new
kernel/rcu/Kconfig file.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The CONFIG_RCU_NOCB_CPU_ALL, CONFIG_RCU_NOCB_CPU_NONE, and
CONFIG_RCU_NOCB_CPU_ZERO Kconfig options are used only in testing and
are redundant with the rcu_nocbs= boot parameter. This commit therefore
removes these three Kconfig options and adjusts the rcutorture scripts
to use the boot parameter instead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
RCU's debugfs tracing used to be the only reasonable low-level debug
information available, but ftrace and event tracing has since surpassed
the RCU debugfs level of usefulness. This commit therefore removes
RCU's debugfs tracing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Classic SRCU was only ever intended to be a fallback in case of issues
with Tree/Tiny SRCU, and the latter two are doing quite well in testing.
This commit therefore removes Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The function srcutorture_get_gp_data() duplicated the check for
sp->batch_check0.head instead of also checking sp->batch_check1.head.
The only effect of this typo would be for rcutorture statistics to
understate the fraction of time that an SRCU grace period was in flight,
and only for Classic SRCU. This commit fixes this typo.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The PROVE_RCU_REPEATEDLY Kconfig option was initially added due to
the volume of messages from PROVE_RCU: Doing just one per boot would
have required excessive numbers of boots to locate them all. However,
PROVE_RCU messages are now relatively rare, so there is no longer any
reason to need more than one such message per boot. This commit therefore
removes the PROVE_RCU_REPEATEDLY Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
|
|
Because raw_spin_lock_irqsave() and raw_spin_unlock_irqrestore()
both do typecheck() on their flags argument, there is no point in
duplicating this check in raw_spin_lock_irqsave_rcu_node() and
raw_spin_unlock_irqrestore_rcu_node(). This commit therefore saves
a few lines by removing this duplicated check.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The NO_HZ_FULL_SYSIDLE full-system-idle capability was added in 2013
by commit 0edd1b1784cb ("nohz_full: Add full-system-idle state machine"),
but has not been used. This commit therefore removes it.
If it turns out to be needed later, this commit can always be reverted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Anything that can be done with the RCU_KTHREAD_PRIO Kconfig option can
also be done with the rcutree.kthread_prio kernel boot parameter.
This commit therefore removes this Kconfig option.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
|
Alexey Dobriyan
Paul E. McKenney
Peter Zijlstra (Intel)
Masami Hiramatsu
Luis R. Rodriguez