| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull input updates from Dmitry Torokhov:
"Just one new driver (Cypress StreetFighter touchkey), and no input
core changes this time.
Plus various fixes and enhancements to existing drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
Input: iforce - fix control-message timeout
Input: wacom_i2c - use macros for the bit masks
Input: ili210x - reduce sample period to 15ms
Input: ili210x - improve polled sample spacing
Input: ili210x - special case ili251x sample read out
Input: elantench - fix misreporting trackpoint coordinates
Input: synaptics-rmi4 - Fix device hierarchy
Input: i8042 - Add quirk for Fujitsu Lifebook T725
Input: cap11xx - add support for cap1206
Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
Input: ili210x - add ili251x firmware update support
Input: ili210x - export ili251x version details via sysfs
Input: ili210x - use resolution from ili251x firmware
Input: pm8941-pwrkey - respect reboot_mode for warm reset
reboot: export symbol 'reboot_mode'
Input: max77693-haptic - drop unneeded MODULE_ALIAS
Input: cpcap-pwrbutton - do not set input parent explicitly
Input: max8925_onkey - don't mark comment as kernel-doc
Input: ads7846 - do not attempt IRQ workaround when deferring probe
Input: ads7846 - use input_set_capability()
...
|
|
Link: https://lkml.kernel.org/r/20211020174406.17889-3-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Some drivers like Qualcomm pm8941-pwrkey need to access 'reboot_mode'
for triggering reboot between cold and warm mode. Export the symbol, so
that drivers built as module can still access the symbol.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210714095850.27185-2-shawn.guo@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There can be few cases when we need to shut-down the system in order to
protect the hardware. Currently this is done at least by the thermal core
when temperature raises over certain limit.
Some PMICs can also generate interrupts for example for over-current or
over-voltage, voltage drops, short-circuit, ... etc. On some systems
these are a sign of hardware failure and only thing to do is try to
protect the rest of the hardware by shutting down the system.
Add shut-down logic which can be used by all subsystems instead of
implementing the shutdown in each subsystem. The logic is stolen from
thermal_core with difference of using atomic_t instead of a mutex in
order to allow calls directly from IRQ context and changing the WARN()
to pr_emerg() as discussed here:
https://lore.kernel.org/lkml/YJuPwAZroVZ%2Fw633@alley/
and here:
https://lore.kernel.org/linux-iommu/20210331093104.383705-4-geert+renesas@glider.be/
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/e83ec1ca9408f90c857ea9dcdc57b14d9037b03f.1622628333.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit d60cd06331a3566d3305b3c7b566e79edf4e2095.
This patch causes a panic when rebooting my Dell Poweredge r440. I do
not have the full panic log as it's lost at that stage of the reboot and
I do not have a serial console. Reverting this patch makes my system
able to reboot again.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Not all the reboot settings from both the kernel command line or sysfs
interface are available to all platforms.
Filter out reboot_type and reboot_force which are x86 only, and also
remove reboot_cpu on kernels without SMP support.
This saves some space, and avoid confusing the user with settings which
will have no effect.
Link: https://lkml.kernel.org/r/20201130173717.198952-3-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "reboot: sysfs improvements".
Some improvements to the sysfs reboot interface: hide not working settings
and support machines with known reboot quirks.
This patch (of 2):
On some machines a quirk can force a specific reboot type. Quirks are
found during a DMI scan, the list of machines which need special reboot
handling is defined in reboot_dmi_table.
The kernel command line reboot= option overrides this via a global
variable `reboot_default`, so that the reboot type requested in the
command line is really performed.
This was not true when setting the reboot type via the new sysfs
interface. Fix this by setting reboot_default upon the first change, like
reboot_setup() does for the command line.
Link: https://lkml.kernel.org/r/20201130173717.198952-1-mcroce@linux.microsoft.com
Link: https://lkml.kernel.org/r/20201130173717.198952-2-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
BOOT_CF9_SAFE_STR is an internal value used only by the x86 code and it's
not possible to set it from userspace.
Remove it, and rename 'cf9_force' to 'pci', so to make it coherent with
the kernel command line reboot= option.
Tested with this script:
cd /sys/kernel/reboot/
for i in cold warm hard soft gpio; do
echo $i >mode
read j <mode
[ $i = $j ] || echo "mode $i != $j"
done
for i in bios acpi kbd triple efi pci; do
echo $i >type
read j <type
[ $i = $j ] || echo "type $i != $j"
done
for i in $(seq 0 $(nproc --ignore=1)); do
echo $i >cpu
read j <cpu
[ $i = $j ] || echo "cpu $i != $j"
done
for i in 0 1; do
echo $i >force
read j <force
[ $i = $j ] || echo "force $i != $j"
done
Link: https://lkml.kernel.org/r/20201113015900.543923-1-mcroce@linux.microsoft.com
Fixes: eab8da48579d ("reboot: allow to specify reboot mode via sysfs")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kernel cmdline reboot= option offers some sort of control on how the
reboot is issued.
We don't always know in advance what type of reboot to perform.
Sometimes a warm reboot is preferred to persist certain memory regions
across the reboot. Others a cold one is needed to apply a future system
update that makes a memory memory model change, like changing the base
page size or resizing a persistent memory region.
Or simply we want to enable reboot_force because we noticed that
something bad happened.
Add handles in sysfs to allow setting these reboot options, so they can
be changed when the system is booted, other than at boot time.
The handlers are under <sysfs>/kernel/reboot, can be read to get the
current configuration and written to alter it.
# cd /sys/kernel/reboot/
# grep . *
cpu:0
force:0
mode:cold
type:acpi
# echo 2 >cpu
# echo yes >force
# echo soft >mode
# echo bios >type
# grep . *
cpu:2
force:1
mode:soft
type:bios
Before setting anything, check for CAP_SYS_BOOT capability, so it's
possible to allow an unpriviledged process to change these settings simply
by relaxing the handles permissions, without opening them to the world.
[natechancellor@gmail.com: fix variable assignments in type_store]
Link: https://lkml.kernel.org/r/20201112035023.974748-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1197
Link: https://lkml.kernel.org/r/20201110202746.9690-1-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Small improvements to the code, without changing the way it works:
- use a local variable, to avoid a small time lapse where reboot_cpu
can have an invalid value
- comment the code which is not easy to understand at a glance
- merge two identical code blocks into one
- replace pointer arithmetics with equivalent array syntax
Link: https://lkml.kernel.org/r/20201103214025.116799-4-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Robin Holt <robinmholt@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* pm-sleep:
PM: sleep: Add dev_wakeup_path() helper
PM / suspend: fix kernel-doc markup
PM: sleep: Print driver flags for all devices during suspend/resume
* pm-acpi:
PM: ACPI: Refresh wakeup device power configuration every time
PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()
PM: ACPI: reboot: Use S5 for reboot
* pm-domains:
PM: domains: create debugfs nodes when adding power domains
PM: domains: replace -ENOTSUPP with -EOPNOTSUPP
* powercap:
powercap: Adjust printing the constraint name with new line
powercap: RAPL: Add AMD Fam19h RAPL support
powercap: Add AMD Fam17h RAPL support
powercap/intel_rapl_msr: Convert rapl_msr_priv into pointer
x86/msr-index: sort AMD RAPL MSRs by address
|
|
Limit the CPU number to num_possible_cpus(), because setting it to a
value lower than INT_MAX but higher than NR_CPUS produces the following
error on reboot and shutdown:
BUG: unable to handle page fault for address: ffffffff90ab1bb0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0
Oops: 0000 [#1] SMP
CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
FS: 00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__do_sys_reboot.cold+0x34/0x5b
do_syscall_64+0x2d/0x40
Fixes: 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "fix parsing of reboot= cmdline", v3.
The parsing of the reboot= cmdline has two major errors:
- a missing bound check can crash the system on reboot
- parsing of the cpu number only works if specified last
Fix both.
This patch (of 2):
This reverts commit 616feab753972b97.
kstrtoint() and simple_strtoul() have a subtle difference which makes
them non interchangeable: if a non digit character is found amid the
parsing, the former will return an error, while the latter will just
stop parsing, e.g. simple_strtoul("123xyx") = 123.
The kernel cmdline reboot= argument allows to specify the CPU used for
rebooting, with the syntax `s####` among the other flags, e.g.
"reboot=warm,s31,force", so if this flag is not the last given, it's
silently ignored as well as the subsequent ones.
Fixes: 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-2-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After reboot, it's not possible to use hotkeys to enter BIOS setup
and boot menu on some HP laptops.
BIOS folks identified the root cause is the missing _PTS call, and
BIOS is expecting _PTS to do proper reset.
Using S5 for reboot is default behavior under Windows, "A full
shutdown (S5) occurs when a system restart is requested" [1], so
let's do the same here.
[1] https://docs.microsoft.com/en-us/windows/win32/power/system-power-states
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.
Guenter Roeck says:
I have stopped building unicore32 images since v4.19 since there is no
available compiler that is still supported by the kernel. I am surprised
that support for it has not been removed from the kernel.
Remove unicore32 port.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
|
|
To turn the KMSG_DUMP_* reasons into a more ordered list, collapse
the redundant KMSG_DUMP_(RESTART|HALT|POWEROFF) reasons into
KMSG_DUMP_SHUTDOWN. The current users already don't meaningfully
distinguish between them, so there's no need to, as discussed here:
https://lore.kernel.org/lkml/CA+CK2bAPv5u1ih5y9t5FUnTyximtFCtDYXJCpuyjOyHNOkRdqw@mail.gmail.com/
Link: https://lore.kernel.org/lkml/20200515184434.8470-2-keescook@chromium.org/
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow specifying reboot_mode for panic only. This is needed on systems
where ramoops is used to store panic logs, and user wants to use warm
reset to preserve those, while still having cold reset on normal
reboots.
Link: http://lkml.kernel.org/r/20190322004735.27702-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
At present, "systemctl suspend" and "shutdown" can run in parrallel. A
system can suspend after devices_shutdown(), and resume. Then the shutdown
task goes on to power off. This causes many devices are not really shut
off. Hence replacing reboot_mutex with system_transition_mutex (renamed
from pm_mutex) to achieve the exclusion. The renaming of pm_mutex as
system_transition_mutex can be better to reflect the purpose of the mutex.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add devm_* wrapper around register_reboot_notifier to simplify device
specific reboot notifier registration/unregistration.
[akpm@linux-foundation.org: move `struct device' forward decl to top-of-file]
Link: http://lkml.kernel.org/r/20170320171753.1705-1-andrew.smirnov@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are two kexec load syscalls, kexec_load another and kexec_file_load.
kexec_file_load has been splited as kernel/kexec_file.c. In this patch I
split kexec_load syscall code to kernel/kexec.c.
And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and
use kexec_file_load only, or vice verse.
The original requirement is from Ted Ts'o, he want kexec kernel signature
being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use
kexec_load syscall can bypass the checking.
Vivek Goyal proposed to create a common kconfig option so user can compile
in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects
KEXEC_CORE so that old config files still work.
Because there's general code need CONFIG_KEXEC_CORE, so I updated all the
architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects
KEXEC_CORE in arch Kconfig. Also updated general kernel code with to
kexec_load syscall.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kernel has orderly_poweroff which allows the kernel to initiate a
graceful shutdown of userspace, by running /sbin/poweroff. This adds
orderly_reboot that will cause userspace to shut itself down by calling
/sbin/reboot.
This will be used for shutdown initiated by a system controller on
platforms that do not use ACPI.
orderly_reboot() should be used when the system wants to allow userspace
to gracefully shut itself down. For cases where the system may imminently
catch on fire, the existing emergency_restart() provides an immediate
reboot without involving userspace.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Various drivers implement architecture and/or device specific means to
restart (reset) the system. Various mechanisms have been implemented to
support those schemes. The best known mechanism is arm_pm_restart, which
is a function pointer to be set either from platform specific code or from
drivers. Another mechanism is to use hardware watchdogs to issue a reset;
this mechanism is used if there is no other method available to reset a
board or system. Two examples are alim7101_wdt, which currently uses the
reboot notifier to trigger a reset, and moxart_wdt, which registers the
arm_pm_restart function.
The existing mechanisms have a number of drawbacks. Typically only one
scheme to restart the system is supported (at least if arm_pm_restart is
used). At least in theory there can be multiple means to restart the
system, some of which may be less desirable (for example one mechanism may
only reset the CPU, while another may reset the entire system). Using
arm_pm_restart can also be racy if the function pointer is set from a
driver, as the driver may be in the process of being unloaded when
arm_pm_restart is called. Using the reboot notifier is always racy, as it
is unknown if and when other functions using the reboot notifier have
completed execution by the time the watchdog fires.
Introduce a system restart handler call chain to solve the described
problems. This call chain is expected to be executed from the
architecture specific machine_restart() function. Drivers providing
system restart functionality (such as the watchdog drivers mentioned
above) are expected to register with this call chain. By using the
priority field in the notifier block, callers can control restart handler
execution sequence and thus ensure that the restart handler with the
optimal restart capabilities for a given system is called first.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace obsolete function.
kstrtoint is used as reboot_cpu is an integer.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic
kernel") moved reboot= handling to generic code. In the process it also
removed the code in native_machine_shutdown() which are moving reboot
process to reboot_cpu/cpu0.
I guess that thought must have been that all reboot paths are calling
migrate_to_reboot_cpu(), so we don't need this special handling. But
kexec reboot path (kernel_kexec()) is not calling
migrate_to_reboot_cpu() so above change broke kexec. Now reboot can
happen on non-boot cpu and when INIT is sent in second kerneo to bring
up BP, it brings down the machine.
So start calling migrate_to_reboot_cpu() in kexec reboot path to avoid
this problem.
Bisected by WANG Chao.
Reported-by: Matthew Whitehead <mwhitehe@redhat.com>
Reported-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Tested-by: WANG Chao <chaowang@redhat.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic
kernel") did some cleanup for reboot= command line, but it made the
reboot_default inoperative.
The default value of variable reboot_default should be 1, and if command
line reboot= is not set, system will use the default reboot mode.
[akpm@linux-foundation.org: fix comment layout]
Signed-off-by: Li Fei <fei.li@intel.com>
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Acked-by: Robin Holt <robinmholt@linux.com>
Cc: <stable@vger.kernel.org> [3.11.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge together the unicore32, arm, and x86 reboot= command line
parameter handling.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Get the new file to pass scripts/checkpatch.pl
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch is preparatory. It moves reboot related syscall, etc
functions from kernel/sys.c to kernel/reboot.c.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Linus Torvalds
Eric W. Biederman
Shawn Guo
Matti Vaittinen
Josef Bacik
Matteo Croce
Rafael J. Wysocki
Kai-Heng Feng
Mike Rapoport
Kees Cook
Thomas Gleixner
Aaro Koskinen
Oleksij Rempel
Pingfan Liu
Andrey Smirnov
Dave Young
Joel Stanley
Guenter Roeck
Fabian Frederick
Vivek Goyal
Chuansheng Liu
Robin Holt