aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/stop_machine.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-04-03dm bufio: delete outdated commentMikulas Patocka1-4/+0
This comment was true when dm-bufio was written but, since 4.3, bios can now have arbitrary size and the driver splits them. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm: add support for secure erase forwardingDenis Semakin5-0/+52
Set QUEUE_FLAG_SECERASE in DM device's queue_flags if a DM table's data devices support secure erase. Also, add support for secure erase to both the linear and striped targets. Signed-off-by: Denis Semakin <d.semakin@omprussia.ru> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm: backfill abnormal IO support to non-splitting IO submissionMike Snitzer1-7/+23
Otherwise, these abnormal IOs would be sent to the DM target regardless of whether the target advertised support for them. Factor out __process_abnormal_io() from __split_and_process_non_flush() so that discards, write same, etc may be conditionally processed. Fixes: 978e51ba3 ("dm: optimize bio-based NVMe IO submission") Cc: stable@vger.kernel.org # 4.16 Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm raid: fix nosync statusHeinz Mauelshagen1-1/+2
Fix a race for "nosync" activations providing "aa.." device health characters and "0/N" sync ratio rather than "AA..." and "N/N". Occurs when status for the raid set is retrieved during resume before the MD sync thread starts and clears the MD_RECOVERY_NEEDED flag. Cc: stable@vger.kernel.org # 4.16+ Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm mpath: use DM_MAPIO_SUBMITTED instead of magic number 0 in process_queued_bios()Wang Sheng-Hui1-1/+1
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm stripe: get rid of a Variable Length Array (VLA)Tycho Andersen1-5/+5
Ideally, we'd like to get rid of all VLAs in the kernel and add -Wvla to the build args: https://lkml.org/lkml/2018/3/7/621 This one is a simple case, since we don't actually need the VLA at all: we can just iterate over the stripes twice, once to emit their names, and the second time to emit status (i.e. trade memory for time). Since the number of stripes is probably low, this is hopefully not that expensive. Signed-off-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm log writes: record metadata flag for better flags recordQu Wenruo1-4/+8
So developer could distinguish data and metadata bios easier. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm integrity: fail early if required HMAC key is not availableMilan Broz1-0/+3
Since crypto API commit 9fa68f62004 ("crypto: hash - prevent using keyed hashes without setting key") dm-integrity cannot use keyed algorithms without the key being set. The dm-integrity recognizes this too late (during use of HMAC), so it allows creation and formatting of superblock, but the device is in fact unusable. Fix it by detecting the key requirement in integrity table constructor. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm: remove unused macro DM_MOD_NAME_SIZEWang Sheng-Hui1-2/+0
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm unstripe: remove unnecessary header includesHeinz Mauelshagen1-6/+0
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm unstripe: remove superfluous module init error path messageHeinz Mauelshagen1-7/+1
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Reviewed-by: Scott Bauer <Scott.Bauer@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm unstripe: add "dm-unstriped" module aliasHeinz Mauelshagen1-0/+1
This target's kernel module being named dm-unstripe.ko doesn't allow lvm2's DM module autoload capability to load the dm-unstripe.ko because lvm2 looks for dm-unstriped.ko due to the target name being "unstriped". Add the "dm-unstriped" module alias to resolve this oversight. NOTE: this isn't needed for the "striped" target, despite its source file being named dm-stripe.c, because it is part of dm-mod.ko. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm unstripe: support non-power-of-2 chunk sizeHeinz Mauelshagen1-12/+10
Address "FIXME: must support non power of 2 chunk_size, dm-stripe.c does". Bump target version to indicate change. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Tested-by: Scott Bauer <Scott.Bauer@intel.com> Reviewed-by: Scott Bauer <Scott.Bauer@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm crypt: limit the number of allocated pagesMikulas Patocka1-1/+65
dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm: allow targets to return output from messages they are sentMike Snitzer11-12/+21
Could be useful for a target to return stats or other information. If a target does DMEMIT() anything to @result from its .message method then it must return 1 to the caller. Signed-off-By: Mike Snitzer <snitzer@redhat.com>
2018-03-29dm: fix dropped return code from dm_get_bdev_for_ioctlMike Snitzer1-3/+5
dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it wasn't). Unfortunately commit 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") reused the variable 'r' to store the return from blkdev_get() that follows prepare_ioctl() -- whereby dropping prepare_ioctl()'s result on the floor. This can lead to an ioctl or persistent reservation being issued to a partition going unnoticed, which implies the extra permission check for CAP_SYS_RAWIO is skipped. Fix this by using a different variable to store blkdev_get()'s return. Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") Reported-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-29dm mpath: fix support for loading scsi_dh modules during table loadMike Snitzer1-1/+1
The ability to have multipath dynamically attach a scsi_dh, that the user specified in the multipath table, was broken by commit e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue"). Restore the ability to load, and attach, a particular scsi_dh module if one is specified (as noticed by checking m->hw_handler_name). Fixes: e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue") Reported-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-14dm mpath: fix passing integrity dataSteffen Maier1-2/+3
After v4.12 commit e2460f2a4bc7 ("dm: mark targets that pass integrity data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support block integrity any more. So add it to the whitelist. This is also a pre-requisite to use block integrity with other dm layer(s) on top of multipath, such as kpartx partitions (dm-linear) or LVM. Also, bump target version to reflect this fix. Fixes: e2460f2a4bc7 ("dm: mark targets that pass integrity data") Cc: <stable@vger.kernel.org> #4.12+ Bisected-by: Fedor Loshakov <loshakov@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-13dm mpath: eliminate need to use scsi_device_from_queueMike Snitzer1-9/+8
Instead of scsi_device_from_queue(), use scsi_dh_attached_handler_name() -- whose implementation uses scsi_device_from_queue() to avoid trying to access SCSI-specific resources from non-SCSI devices. Fixes buildbot reported issue when CONFIG_SCSI isn't set: ERROR: "scsi_device_from_queue" [drivers/md/dm-multipath.ko] undefined! Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-13dm mpath: fix uninitialized 'pg_init_wait' waitqueue_head NULL pointerMike Snitzer1-11/+10
Initialize all the scsi_dh related 'struct multipath' members regardless of whether a scsi_dh is in use or not. The subtle (and fragile) SCSI-assuming legacy code clearly needs further decoupling from non-SCSI (and/or developer understanding). Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Reported-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-11Linux 4.16-rc5Linus Torvalds1-1/+1
2018-03-11dmaengine: mv_xor_v2: Fix clock resource by adding a register clockGregory CLEMENT2-6/+25
On the CP110 components which are present on the Armada 7K/8K SoC we need to explicitly enable the clock for the registers. However it is not needed for the AP8xx component, that's why this clock is optional. With this patch both clock have now a name, but in order to be backward compatible, the name of the first clock is not used. It allows to still use this clock with a device tree using the old binding. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-09lib/test_kmod.c: fix limit check on number of test devices createdLuis R. Rodriguez1-1/+1
As reported by Dan the parentheses is in the wrong place, and since unlikely() call returns either 0 or 1 it's never less than zero. The second issue is that signed integer overflows like "INT_MAX + 1" are undefined behavior. Since num_test_devs represents the number of devices, we want to stop prior to hitting the max, and not rely on the wrap arround at all. So just cap at num_test_devs + 1, prior to assigning a new device. Link: http://lkml.kernel.org/r/20180224030046.24238-1-mcgrof@kernel.org Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpusLi Zhijian1-8/+17
Fix userfaultfd_hugetlb on hosts which have more than 64 cpus. --------------------------- running userfaultfd_hugetlb --------------------------- invalid MiB Usage: <MiB> <bounces> [FAIL] Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size >= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host cpus > 64, it requires more than 128M. [zhijianx.li@intel.com: update changelog/comments and variable name] Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: SeongJae Park <sj38.park@gmail.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09mm/page_alloc: fix memmap_init_zone pageblock alignmentDaniel Vacek1-2/+7
Commit b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible") introduced a bug where move_freepages() triggers a VM_BUG_ON() on uninitialized page structure due to pageblock alignment. To fix this, simply align the skipped pfns in memmap_init_zone() the same way as in move_freepages_block(). Seen in one of the RHEL reports: crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1 kernel BUG at mm/page_alloc.c:1389! invalid opcode: 0000 [#1] SMP -- RIP: 0010:[<ffffffff8118833e>] [<ffffffff8118833e>] move_freepages+0x15e/0x160 RSP: 0018:ffff88054d727688 EFLAGS: 00010087 -- Call Trace: [<ffffffff811883b3>] move_freepages_block+0x73/0x80 [<ffffffff81189e63>] __rmqueue+0x263/0x460 [<ffffffff8118c781>] get_page_from_freelist+0x7e1/0x9e0 [<ffffffff8118caf6>] __alloc_pages_nodemask+0x176/0x420 -- RIP [<ffffffff8118833e>] move_freepages+0x15e/0x160 RSP <ffff88054d727688> crash> page_init_bug -v | grep RAM <struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB) <struct resource 0xffff88067fffd3a0> 100000 - 430bffff System RAM ( 1.05 GiB = 1071.75 MiB = 1097472.00 KiB) <struct resource 0xffff88067fffd410> 4b0c8000 - 4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB) <struct resource 0xffff88067fffd480> 4bfac000 - 646b1fff System RAM (391.02 MiB = 400408.00 KiB) <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct resource 0xffff88067fffd640> 100000000 - 67fffffff System RAM ( 22.00 GiB) crash> page_init_bug | head -6 <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct page 0xffffea0001ede200> 1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 <struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0> <struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095 <struct page 0xffffea0001edffc0> 1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 BUG, zones differ! Note that this range follows two not populated sections 68000000-77ffffff in this zone. 7b788000-7b7fffff is the first one after a gap. This makes memmap_init_zone() skip all the pfns up to the beginning of this range. But this range is not pageblock (2M) aligned. In fact no range has to be. crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS ffffea0001e00000 78000000 0 0 0 0 ffffea0001ed7fc0 7b5ff000 0 0 0 0 ffffea0001ed8000 7b600000 0 0 0 0 <<<< ffffea0001ede1c0 7b787000 0 0 0 0 ffffea0001ede200 7b788000 0 0 1 1fffff00000000 Top part of page flags should contain nodeid and zonenr, which is not the case for page ffffea0001ed8000 here (<<<<). crash> log | grep -o fffea0001ed[^\ ]* | sort -u fffea0001ed8000 fffea0001eded20 fffea0001edffc0 crash> bt -r | grep -o fffea0001ed[^\ ]* | sort -u fffea0001ed8000 fffea0001eded00 fffea0001eded20 fffea0001edffc0 Initialization of the whole beginning of the section is skipped up to the start of the range due to the commit b92df1de5d28. Now any code calling move_freepages_block() (like reusing the page from a freelist as in this example) with a page from the beginning of the range will get the page rounded down to start_page ffffea0001ed8000 and passed to move_freepages() which crashes on assertion getting wrong zonenr. > VM_BUG_ON(page_zone(start_page) != page_zone(end_page)); Note, page_zone() derives the zone from page flags here. From similar machine before commit b92df1de5d28: crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS fffff73941e00000 78000000 0 0 1 1fffff00000000 fffff73941ed7fc0 7b5ff000 0 0 1 1fffff00000000 fffff73941ed8000 7b600000 0 0 1 1fffff00000000 fffff73941edff80 7b7fe000 0 0 1 1fffff00000000 fffff73941edffc0 7b7ff000 ffff8e67e04d3ae0 ad84 1 1fffff00020068 uptodate,lru,active,mappedtodisk All the pages since the beginning of the section are initialized. move_freepages()' not gonna blow up. The same machine with this fix applied: crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS ffffea0001e00000 78000000 0 0 0 0 ffffea0001e00000 7b5ff000 0 0 0 0 ffffea0001ed8000 7b600000 0 0 1 1fffff00000000 ffffea0001edff80 7b7fe000 0 0 1 1fffff00000000 ffffea0001edffc0 7b7ff000 ffff88017fb13720 8 2 1fffff00020068 uptodate,lru,active,mappedtodisk At least the bare minimum of pages is initialized preventing the crash as well. Customers started to report this as soon as 7.4 (where b92df1de5d28 was merged in RHEL) was released. I remember reports from September/October-ish times. It's not easily reproduced and happens on a handful of machines only. I guess that's why. But that does not make it less serious, I think. Though there actually is a report here: https://bugzilla.kernel.org/show_bug.cgi?id=196443 And there are reports for Fedora from July: https://bugzilla.redhat.com/show_bug.cgi?id=1473242 and CentOS: https://bugs.centos.org/view.php?id=13964 and we internally track several dozens reports for RHEL bug https://bugzilla.redhat.com/show_bug.cgi?id=1525121 Link: http://lkml.kernel.org/r/0485727b2e82da7efbce5f6ba42524b429d0391a.1520011945.git.neelx@redhat.com Fixes: b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible") Signed-off-by: Daniel Vacek <neelx@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09mm/memblock.c: hardcode the end_pfn being -1Daniel Vacek1-5/+5
This is just a cleanup. It aids handling the special end case in the next commit. [akpm@linux-foundation.org: make it work against current -linus, not against -mm] [akpm@linux-foundation.org: make it work against current -linus, not against -mm some more] Link: http://lkml.kernel.org/r/1ca478d4269125a99bcfb1ca04d7b88ac1aee924.1520011944.git.neelx@redhat.com Signed-off-by: Daniel Vacek <neelx@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09mm/gup.c: teach get_user_pages_unlocked to handle FOLL_NOWAITAndrea Arcangeli1-2/+5
KVM is hanging during postcopy live migration with userfaultfd because get_user_pages_unlocked is not capable to handle FOLL_NOWAIT. Earlier FOLL_NOWAIT was only ever passed to get_user_pages. Specifically faultin_page (the callee of get_user_pages_unlocked caller) doesn't know that if FAULT_FLAG_RETRY_NOWAIT was set in the page fault flags, when VM_FAULT_RETRY is returned, the mmap_sem wasn't actually released (even if nonblocking is not NULL). So it sets *nonblocking to zero and the caller won't release the mmap_sem thinking it was already released, but it wasn't because of FOLL_NOWAIT. Link: http://lkml.kernel.org/r/20180302174343.5421-2-aarcange@redhat.com Fixes: ce53053ce378c ("kvm: switch get_user_page_nowait() to get_user_pages_unlocked()") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()Kees Cook1-0/+2
Commit b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash") changed the ordering of fixups, and did not take into account the case of x86 processing non-WARN() and non-BUG() exceptions. This would lead to output of a false BUG line with no other information. In the case of a refcount exception, it would be immediately followed by the refcount WARN(), producing very strange double-"cut here": lkdtm: attempting bad refcount_inc() overflow ------------[ cut here ]------------ Kernel BUG at 0000000065f29de5 [verbose debug info unavailable] ------------[ cut here ]------------ refcount_t overflow at lkdtm_REFCOUNT_INC_OVERFLOW+0x6b/0x90 in cat[3065], uid/euid: 0/0 WARNING: CPU: 0 PID: 3065 at kernel/panic.c:657 refcount_error_report+0x9a/0xa4 ... In the prior ordering, exceptions were searched first: do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str, ... if (fixup_exception(regs, trapnr)) return 0; - if (fixup_bug(regs, trapnr)) - return 0; - As a result, fixup_bugs()'s is_valid_bugaddr() didn't take into account needing to search the exception list first, since that had already happened. So, instead of searching the exception list twice (once in is_valid_bugaddr() and then again in fixup_exception()), just add a simple sanity check to report_bug() that will immediately bail out if a BUG() (or WARN()) entry is not found. Link: http://lkml.kernel.org/r/20180301225934.GA34350@beast Fixes: b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash") Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Richard Weinberger <richard.weinberger@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09bug: use %pB in BUG and stack protector failureKees Cook2-2/+2
The BUG and stack protector reports were still using a raw %p. This changes it to %pB for more meaningful output. Link: http://lkml.kernel.org/r/20180301225704.GA34198@beast Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Richard Weinberger <richard.weinberger@gmail.com>, Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09hugetlb: fix surplus pages accountingMichal Hocko1-1/+1
Dan Rue has noticed that libhugetlbfs test suite fails counter test: # mount_point="/mnt/hugetlb/" # echo 200 > /proc/sys/vm/nr_hugepages # mkdir -p "${mount_point}" # mount -t hugetlbfs hugetlbfs "${mount_point}" # export LD_LIBRARY_PATH=/root/libhugetlbfs/libhugetlbfs-2.20/obj64 # /root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters Starting testcase "/root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters", pid 3319 Base pool size: 0 Clean... FAIL Line 326: Bad HugePages_Total: expected 0, actual 1 The bug was bisected to 0c397daea1d4 ("mm, hugetlb: further simplify hugetlb allocation API"). The reason is that alloc_surplus_huge_page() misaccounts per node surplus pages. We should increase surplus_huge_pages_node rather than nr_huge_pages_node which is already handled by alloc_fresh_huge_page. Link: http://lkml.kernel.org/r/20180221191439.GM2231@dhcp22.suse.cz Fixes: 0c397daea1d4 ("mm, hugetlb: further simplify hugetlb allocation API") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Dan Rue <dan.rue@linaro.org> Tested-by: Dan Rue <dan.rue@linaro.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09RDMA/mlx5: Fix integer overflow while resizing CQLeon Romanovsky1-1/+6
The user can provide very large cqe_size which will cause to integer overflow as it can be seen in the following UBSAN warning: ======================================================================= UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53 signed integer overflow: 64870 * 65536 cannot be represented in type 'int' CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 handle_overflow+0x1f3/0x251 ? __ubsan_handle_negate_overflow+0x19b/0x19b ? lock_acquire+0x440/0x440 mlx5_ib_resize_cq+0x17e7/0x1e40 ? cyc2ns_read_end+0x10/0x10 ? native_read_msr_safe+0x6c/0x9b ? cyc2ns_read_end+0x10/0x10 ? mlx5_ib_modify_cq+0x220/0x220 ? sched_clock_cpu+0x18/0x200 ? lookup_get_idr_uobject+0x200/0x200 ? rdma_lookup_get_uobject+0x145/0x2f0 ib_uverbs_resize_cq+0x207/0x3e0 ? ib_uverbs_ex_create_cq+0x250/0x250 ib_uverbs_write+0x7f9/0xef0 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? ib_uverbs_ex_create_cq+0x250/0x250 ? uverbs_devnode+0x110/0x110 ? sched_clock_cpu+0x18/0x200 ? do_raw_spin_trylock+0x100/0x100 ? __lru_cache_add+0x16e/0x290 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? sched_clock_cpu+0x18/0x200 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x433549 RSP: 002b:00007ffe63bd1ea8 EFLAGS: 00000217 ======================================================================= Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 3.13 Fixes: bde51583f49b ("IB/mlx5: Add support for resize CQ") Reported-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-09Revert "RDMA/mlx5: Fix integer overflow while resizing CQ"Doug Ledford1-6/+1
The original commit of this patch has a munged log message that is missing several of the tags the original author intended to be on the patch. This was due to patchworks misinterpreting a cut-n-paste separator line as an end of message line and munging the mbox that was used to import the patch: https://patchwork.kernel.org/patch/10264089/ The original patch will be reapplied with a fixed commit message so the proper tags are applied. This reverts commit aa0de36a40f446f5a21a7c1e677b98206e242edb. Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-09arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discoveryMarc Zyngier1-2/+2
A recent update to the ARM SMCCC ARCH_WORKAROUND_1 specification allows firmware to return a non zero, positive value to describe that although the mitigation is implemented at the higher exception level, the CPU on which the call is made is not affected. Let's relax the check on the return value from ARCH_WORKAROUND_1 so that we only error out if the returned value is negative. Fixes: b092201e0020 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-03-09Documentation/sphinx: Fix Directive import errorMatthew Wilcox1-2/+1
Sphinx 1.7 removed sphinx.util.compat.Directive so people who have upgraded cannot build the documentation. Switch to docutils.parsers.rst.Directive which has been available since docutils 0.5 released in 2009. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1083694 Co-developed-by: Takashi Iwai <tiwai@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-09platform/x86: dell-smbios: Resolve dependency error on DCDBASDarren Hart (VMware)1-0/+6
When the DELL_SMBIOS_SMM backend is enabled, the DELL_SMBIOS symbol depends on DELL_DCDBAS, and we must avoid the situation where DELL_SMBIOS=y and DCDBAS=m. Adding the conditional dependency to DELL_SMBIOS such as: depends !DELL_SMBIOS_SMM || (DCDBAS || DCDBAS=n) results in the Kconfig tooling complaining about a circular dependency, although it appears to work in practice. Avoid the errors by simplifying the dependency and forcing DELL_SMBIOS to be <= DCDBAS if DCDBAS is enabled (thanks to Greg KH for the suggestion). Cc: Mario.Limonciello@dell.com Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09platform/x86: Allow for SMBIOS backend defaultsDarren Hart (VMware)1-2/+4
Avoid accidental configurations by setting default y for DELL_SMBIOS backends. Avoid this impacting the default build size, by making them dependent on DELL_SMBIOS, so they only appear when DELL_SMBIOS is manually selected, or by DELL_LAPTOP or DELL_WMI. While DELL_SMBIOS does have a prompt, it does not have any dependencies. Keeping DELL_SMBIOS visible, despite being "select"ed by DELL_LAPTOP and DELL_WMI, is a deliberate choice to provide context for the WMI and SMM backends, which would otherwise appear to float without context within the menu. Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09platform/x86: dell-smbios: Link all dell-smbios-* modules togetherMario Limonciello6-33/+66
Some race conditions were raised due to dell-smbios and its backends not being ready by the time that a consumer would call one of the exported methods. To avoid this problem, guarantee that all initialization has been done by linking them all together and running init for them all. As part of this change the Kconfig needs to be adjusted so that CONFIG_DELL_SMBIOS_SMM and CONFIG_DELL_SMBIOS_WMI are boolean rather than modules. CONFIG_DELL_SMBIOS is a visually selectable option again and both CONFIG_DELL_SMBIOS_WMI and CONFIG_DELL_SMBIOS_SMM are optional. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> [dvhart: Update prompt and help text for DELL_SMBIOS_* backends] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-baseMario Limonciello2-0/+1
This is being done to faciliate a later change to link all the dell-smbios drivers together. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09platform/x86: dell-smbios: Correct some style warningsMario Limonciello1-3/+5
WARNING: function definition argument 'struct calling_interface_buffer *' should also have an identifier name + int (*call_fn)(struct calling_interface_buffer *); WARNING: Block comments use * on subsequent lines + /* 4 bytes of table header, plus 7 bytes of Dell header, plus at least + 6 bytes of entry */ WARNING: Block comments use a trailing */ on a separate line + 6 bytes of entry */ Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09loop: Fix lost writes caused by missing flagRoss Zwisler1-1/+1
The following commit: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") replaced __do_lo_send_write(), which used ITER_KVEC iterators, with lo_write_bvec() which uses ITER_BVEC iterators. In this change, though, the WRITE flag was lost: - iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len); + iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len); This flag is necessary for the DAX case because we make decisions based on whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and in dax_iomap_rw(). We end up going through this path in configurations where we combine a PMEM device with 4k sectors, a loopback device and DAX. The consequence of this missed flag is that what we intend as a write actually turns into a read in the DAX code, so no data is ever written. The very simplest test case is to create a loopback device and try and write a small string to it, then hexdump a few bytes of the device to see if the write took. Without this patch you read back all zeros, with this you read back the string you wrote. For XFS this causes us to fail or panic during the following xfstests: xfs/074 xfs/078 xfs/216 xfs/217 xfs/250 For ext4 we have a similar issue where writes never happen, but we don't currently have any xfstests that use loopback and show this issue. Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This causes the xfstests to all pass. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Fixes: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-09clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependencyMasahiro Yamada1-0/+1
The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Add the proper dependency to the ATMEL_ST config. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com
2018-03-09rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsitesBoqun Feng1-2/+3
When running rcutorture with TREE03 config, CONFIG_PROVE_LOCKING=y, and kernel cmdline argument "rcutorture.gp_exp=1", lockdep reports a HARDIRQ-safe->HARDIRQ-unsafe deadlock: ================================ WARNING: inconsistent lock state 4.16.0-rc4+ #1 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. takes: __schedule+0xbe/0xaf0 {IN-HARDIRQ-W} state was registered at: _raw_spin_lock+0x2a/0x40 scheduler_tick+0x47/0xf0 ... other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&rq->lock); <Interrupt> lock(&rq->lock); *** DEADLOCK *** 1 lock held by rcu_torture_rea/724: rcu_torture_read_lock+0x0/0x70 stack backtrace: CPU: 2 PID: 724 Comm: rcu_torture_rea Not tainted 4.16.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: lock_acquire+0x90/0x200 ? __schedule+0xbe/0xaf0 _raw_spin_lock+0x2a/0x40 ? __schedule+0xbe/0xaf0 __schedule+0xbe/0xaf0 preempt_schedule_irq+0x2f/0x60 retint_kernel+0x1b/0x2d RIP: 0010:rcu_read_unlock_special+0x0/0x680 ? rcu_torture_read_unlock+0x60/0x60 __rcu_read_unlock+0x64/0x70 rcu_torture_read_unlock+0x17/0x60 rcu_torture_reader+0x275/0x450 ? rcutorture_booster_init+0x110/0x110 ? rcu_torture_stall+0x230/0x230 ? kthread+0x10e/0x130 kthread+0x10e/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ? call_usermodehelper_exec_async+0x11a/0x150 ret_from_fork+0x3a/0x50 This happens with the following even sequence: preempt_schedule_irq(); local_irq_enable(); __schedule(): local_irq_disable(); // irq off ... rcu_note_context_switch(): rcu_note_preempt_context_switch(): rcu_read_unlock_special(): local_irq_save(flags); ... raw_spin_unlock_irqrestore(...,flags); // irq remains off rt_mutex_futex_unlock(): raw_spin_lock_irq(); ... raw_spin_unlock_irq(); // accidentally set irq on <return to __schedule()> rq_lock(): raw_spin_lock(); // acquiring rq->lock with irq on which means rq->lock becomes a HARDIRQ-unsafe lock, which can cause deadlocks in scheduler code. This problem was introduced by commit 02a7c234e540 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints"). That brought the user of rt_mutex_futex_unlock() with irq off. To fix this, replace the *lock_irq() in rt_mutex_futex_unlock() with *lock_irq{save,restore}() to make it safe to call rt_mutex_futex_unlock() with irq off. Fixes: 02a7c234e540 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints") Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20180309065630.8283-1-boqun.feng@gmail.com
2018-03-09x86/kprobes: Fix kernel crash when probing .entry_trampoline codeFrancis Deslauriers3-1/+12
Disable the kprobe probing of the entry trampoline: .entry_trampoline is a code area that is used to ensure page table isolation between userspace and kernelspace. At the beginning of the execution of the trampoline, we load the kernel's CR3 register. This has the effect of enabling the translation of the kernel virtual addresses to physical addresses. Before this happens most kernel addresses can not be translated because the running process' CR3 is still used. If a kprobe is placed on the trampoline code before that change of the CR3 register happens the kernel crashes because int3 handling pages are not accessible. To fix this, add the .entry_trampoline section to the kprobe blacklist to prohibit the probing of code before all the kernel pages are accessible. Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: mathieu.desnoyers@efficios.com Cc: mhiramat@kernel.org Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09perf/core: Fix ctx_event_type in ctx_resched()Song Liu1-1/+3
In ctx_resched(), EVENT_FLEXIBLE should be sched_out when EVENT_PINNED is added. However, ctx_resched() calculates ctx_event_type before checking this condition. As a result, pinned events will NOT get higher priority than flexible events. The following shows this issue on an Intel CPU (where ref-cycles can only use one hardware counter). 1. First start: perf stat -C 0 -e ref-cycles -I 1000 2. Then, in the second console, run: perf stat -C 0 -e ref-cycles:D -I 1000 The second perf uses pinned events, which is expected to have higher priority. However, because it failed in ctx_resched(). It is never run. This patch fixes this by calculating ctx_event_type after re-evaluating event_type. Reported-by: Ephraim Park <ephiepark@fb.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <jolsa@redhat.com> Cc: <kernel-team@fb.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 487f05e18aa4 ("perf/core: Optimize event rescheduling on active contexts") Link: http://lkml.kernel.org/r/20180306055504.3283731-1-songliubraving@fb.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-08nvme_fc: rework sqsize handlingJames Smart1-10/+17
Corrected four outstanding issues in the transport around sqsize. 1: Create Connection LS is sending the 1's-based sqsize, should be sending the 0's-based value. 2: allocation of hw queue is using the 0's-base size. It should be using the 1's-based value. 3: normalization of ctrl.sqsize by MQES is using MQES+1 (1's-based value). It should be MQES (0's-based value). 4: Missing clause to ensure queue_count not larger than ctrl->sqsize. Corrected by: Clean up routines that pass queue size around. The queue size value is the actual count (1's-based) value and determined from ctrl->sqsize + 1. Routines that send 0's-based value adapt from queue size. Sset ctrl->sqsize properly for MQES. Added clause to nsure queue_count not larger than ctrl->sqsize + 1. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-08ALSA: hda: add dock and led support for HP ProBook 640 G2Dennis Wassenberg1-0/+1
This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G2 Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-08ALSA: hda: add dock and led support for HP EliteBook 820 G3Dennis Wassenberg1-0/+1
This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 820 G3 Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-08nvme-fabrics: Ignore nr_io_queues option for discovery controllersRoland Dreier1-0/+5
This removes a dependency on the order options are passed when creating a fabrics controller. With the old code, if "nr_io_queues" appears before an "nqn" option specifying the discovery controller, then nr_io_queues is overridden with zero. If "nr_io_queues" appears after specifying the discovery controller, then the nr_io_queues option is used to set the number of queues, and the driver attempts to establish IO connections to the discovery controller (which doesn't work). It seems better to ignore (and warn about) the "nr_io_queues" option if userspace has already asked to connect to the discovery controller. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-09kbuild: Handle builtin dtb file names containing hyphensJames Hogan1-4/+4
cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree FDT (that is, the .dtb file) as binary data in the kernel image. This assembly source contains labels before and after the binary data. The label names incorporate the file name of the corresponding .dtb file. Hyphens are not legal characters in labels, so .dtb files built into the kernel with hyphens in the file name result in errors like the following: bcm3368-netgear-cvg834g.dtb.S: Assembler messages: bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-' bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:' bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:' bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file name to underscores when constructing the labels. As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC contain hyphens in their names, but the issue only currently manifests on Broadcom MIPS platforms, as that is the only place where such files are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is used (in the latter case it admittedly shouldn't really build all the dtb.o files, but thats a separate issue). Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") Signed-off-by: James Hogan <jhogan@kernel.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-09scripts/bloat-o-meter: fix typos in helpMatteo Croce1-1/+1
The bloat-o-meter script has two typos in the help, fix both. Fixes: 192efb7a1f9b ("bloat-o-meter: provide 3 different arguments for data, function and All") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.