aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/sysctl.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-04-05liquidio: clear the correct memoryDan Carpenter1-1/+1
There is a cut and paste bug here so we accidentally clear the first few bytes of "resp" a second time instead clearing "ctx". Fixes: 50c0add534d2 ("liquidio: refactor interrupt moderation code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05net: stmmac: rx queue to dma channel mapping fixJoao Pinto1-1/+1
In hardware configurations where multiple queues are active, the rx queue needs to be mapped into a dma channel, even if a single rx queue is used. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05phy/ethtool: Add missing SPEED_<foo> stringsJoe Perches2-0/+15
Add all the currently available SPEED_<foo> strings. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Cap the msix vector with the max completion rings.Michael Chan1-2/+3
The current code enables up to the maximum MSIX vectors in the PCIE config space without considering the max completion rings available. An MSIX vector is only useful when it has an associated completion ring, so it is better to cap it. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Use short TX BDs for the XDP TX ring.Michael Chan1-14/+2
No offload is performed on the XDP_TX ring so we can use the short TX BDs. This has the effect of doubling the size of the XDP TX ring so that it now matches the size of the rx ring by default. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add interrupt test to ethtool -t selftest.Michael Chan1-1/+31
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add PHY loopback to ethtool self-test.Michael Chan1-2/+60
It is necessary to disable autoneg before enabling PHY loopback, otherwise link won't come up. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add ethtool mac loopback self test.Michael Chan5-11/+199
The mac loopback self test operates in polling mode. To support that, we need to add functions to open and close the NIC half way. The half open mode allows the rings to operate without IRQ and NAPI. We use the XDP transmit function to send the loopback packet. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add basic ethtool -t selftest support.Michael Chan4-3/+150
Add the basic infrastructure and only firmware tests initially. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add suspend/resume callbacks.Michael Chan1-0/+57
Add suspend/resume callbacks using the newer dev_pm_ops method. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add ethtool set_wol method.Michael Chan3-0/+60
And add functions to set and free magic packet filter. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add ethtool get_wol method.Michael Chan2-0/+17
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add pci shutdown method.Michael Chan1-0/+31
Add pci shutdown method to put device in the proper WoL and power state. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add basic WoL infrastructure.Michael Chan2-0/+47
Add code to driver probe function to check if the device is WoL capable and if Magic packet WoL filter is currently set. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Update firmware interface spec to 1.7.6.2.Michael Chan3-37/+297
Features added include WoL and selftest. Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03qed: Manage with less memory regions for RoCERam Amrani5-38/+125
It's possible some configurations would prevent driver from utilizing all the Memory Regions due to a lack of ILT lines. In such a case, calculate how many memory regions would have to be dropped due to limit, and manage without those. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03qed: RoCE doesn't need to use SRCMintz, Yuval1-2/+1
As RoCE doesn't need to use the SRC, allocating ILT memory on behalf of RoCE is wasting available ILT lines. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03qed: Correct TM ILT lines in presence of VFsMintz, Yuval1-1/+1
As of today there's no protocol supported that requires support from the TM hardware block and enables SRIOV, but we should still correct the calculation to reflect the lines required for such future VFs instead of changing the PF's own lines. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03qed: Fix TM block ILT allocationMichal Kalderon1-7/+25
When configuring the HW timers block we should set the number of CIDs up until the last CID that require timers, instead of only those CIDs whose protocol needs timers support. Today, the protocols that require HW timers' support have their CIDs before any other protocol, but that would change in future [when we add iWARP support]. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03qed: Revise QM cofigurationAriel Elior15-303/+665
Refactor and clean up the queue manager initialization logic. Also, this adds support for RoC low latency queues, which later would be used for improving RoCE latency in high throughput scenarios. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: usbnet: support 64bit statsGreg Ungerer18-4/+73
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03soreuseport: use "unsigned int" in __reuseport_alloc()Alexey Dobriyan1-2/+2
Number of sockets is limited by 16-bit, so 64-bit allocation will never happen. 16-bit ops are the worst code density-wise on x86_64 because of additional prefix (66). Space savings: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3) function old new delta reuseport_add_sock 539 536 -3 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03flowcache: more "unsigned int"Alexey Dobriyan2-9/+10
Make ->hash_count, ->low_watermark and ->high_watermark unsigned int and propagate unsignedness to other variables. This change doesn't change code generation because these fields aren't used in 64-bit contexts but make it anyway: these fields can't be negative numbers. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03flowcache: make flow_cache_hash_size() return "unsigned int"Alexey Dobriyan1-6/+8
Hash size can't negative so "unsigned int" is logically correct. Propagate "unsigned int" to loop counters. Space savings: add/remove: 0/0 grow/shrink: 2/2 up/down: 6/-18 (-12) function old new delta flow_cache_flush_tasklet 362 365 +3 __flow_cache_shrink 333 336 +3 flow_cache_cpu_up_prep 178 171 -7 flow_cache_lookup 1159 1148 -11 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03flowcache: make flow_key_size() return "unsigned int"Alexey Dobriyan2-4/+4
Flow keys aren't 4GB+ numbers so 64-bit arithmetic is excessive. Space savings (I'm not sure what CSWTCH is): add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-48 (-48) function old new delta flow_cache_lookup 1163 1159 -4 CSWTCH 75997 75953 -44 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net/faraday: Add missing include of of.hAndrew Lunn1-0/+1
Breaking the include loop netdevice.h, dsa.h, devlink.h broke this driver, it depends on includes brought in by these headers. Adding linux/of.h fixes it. Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03vxlan: fix ND proxy when skb doesn't have transport header offsetVincent Bernat1-14/+15
When an incoming frame is tagged or when GRO is disabled, the skb handled to vxlan_xmit() doesn't contain a valid transport header offset. This makes ND proxying fail. We combine two changes: replace use of skb_transport_offset() and ensure the necessary amount of skb is linear just before using it: - In vxlan_xmit(), when determining if we have an ICMPv6 neighbor discovery packet, just check if it is an ICMPv6 packet and rely on neigh_reduce() to do more checks if this is the case. The use of pskb_may_pull() is replaced by skb_header_pointer() for just the IPv6 header. - In neigh_reduce(), add pskb_may_pull() for IPv6 header and neighbor discovery message since this was removed from vxlan_xmit(). Replace skb_transport_header() with ipv6_hdr() + 1. - In vxlan_na_create(), replace first skb_transport_offset() with ipv6_hdr() + 1 and second with skb_network_offset() + sizeof(struct ipv6hdr). Additionally, ensure we pskb_may_pull() the whole skb as we need it to iterate over the options. Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03sctp: add SCTP_PR_STREAM_STATUS sockopt for prsctpXin Long5-2/+84
Before when implementing sctp prsctp, SCTP_PR_STREAM_STATUS wasn't added, as it needs to save abandoned_(un)sent for every stream. After sctp stream reconf is added in sctp, assoc has structure sctp_stream_out to save per stream info. This patch is to add SCTP_PR_STREAM_STATUS by putting the prsctp per stream statistics into sctp_stream_out. v1->v2: fix an indent issue. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Some checkpatch.pl script & warning fixesSalil6-14/+11
This patch fixes some checkpatch.pl script caught errors and warnings during the compilation time. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Avoid Hip06 chip TX packet line buglipeng7-70/+169
There is a bug on Hip06 that tx ring interrupts packets count will be clear when drivers send data to tx ring, so that the tx packets count will never upgrade to packets line, and cause the interrupts engendered was delayed. Sometimes, it will cause sending performance lower than expected. To fix this bug, we set tx ring interrupts packets line to 1 forever, to avoid count clear. And set the gap time to 20us, to solve the problem that too many interrupts engendered when packets line is 1. This patch could advance the send performance on ARM from 6.6G to 9.37G when an iperf send thread on ARM and an iperf send thread on X86 for XGE. Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Adjust the SBM module buffer thresholdKejian Yan1-4/+4
HNS needs SMB Buffers to store at least two packets after sending pause frame because of the link delay. The MTU of HNS is 9728. As the processor user manual described, the SBM buffer threshold should be modified. Reported-by: Ping Zhang <zhangping5@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Simplify the exception sequence in hns_ppe_init()Kejian Yan1-9/+8
We need to free all ppe submodule if it fails to initialize ppe by any fault, so this patch will free all ppe resource before hns_ppe_init() returns exception situation Reported-by: JinchuanTian <tianjinchuan1@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Optimise the code in hns_mdio_wait_ready()Kejian Yan1-4/+6
This patch fixes the code to clear pclint warning/info. Reported-by: Ping Zhang <zhangping5@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Clean redundant code from hns_mdio.c fileKejian Yan1-10/+0
This patch cleans the redundant code from hns_mdio.c. Reported-by: Ping Zhang <zhangping5@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Remove redundant mac table operationsKejian Yan2-170/+0
This patch removes redundant functions used only for debugging purposes. Reported-by: Weiwei Deng <dengweiwei@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Remove redundant mac_get_id()Kejian Yan3-23/+0
There is a mac_id in mac control block structure, so the callback function mac_get_id() is useless. Here we remove this function. Reported-by: Weiwei Deng <dengweiwei@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Remove the redundant adding and deleting mac functionKejian Yan4-122/+0
The functions (hns_dsaf_set_mac_mc_entry() and hns_mac_del_mac()) are not called by any functions. They are dead code in hns. And the same features are implemented by the patch (the id is 66355f5). Reported-by: Weiwei Deng <dengweiwei@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Correct HNS RSS key set functionlipeng2-14/+18
This patch fixes below ethtool configuration error: localhost:~ # ethtool -X eth0 hkey XX:XX:XX... Cannot set Rx flow hash configuration: Operation not supported Signed-off-by: lipeng <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Replace netif_tx_lock to ring spin locklipeng3-10/+15
netif_tx_lock is a global spin lock, it will take affect in all rings in the netdevice. In tx_poll_one process, it can only lock the current ring, in this case, we define a spin lock in hnae_ring struct for it. Signed-off-by: lipeng <lipeng321@huawei.com> reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Fix to adjust buf_size of ring according to mtulipeng7-24/+337
Because buf_size of ring set to 2048, the process of rx_poll_one can reuse the page, therefore the performance of XGE can improve. But the chip only supports three bds in one package, so the max mtu is 6K when it sets to 2048. For better performane in litter mtu, we need change buf_size according to mtu. When user change mtu, hns is only change the desc in memory. There are some desc has been fetched by the chip, these desc can not be changed by the code. So it needs set the port loopback and send some packages to let the chip consumes the wrong desc and fetch new desc. Because the Pv660 do not support rss indirection, we need add version check in mtu change process. Signed-off-by: lipeng <lipeng321@huawei.com> reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Optimize hns_nic_common_poll for better performancelipeng2-21/+31
After polling less than buget packages, we need check again. If there are still some packages, we call napi_schedule add softirq queue, this is not better way. So we return buget value instead of napi_schedule. Signed-off-by: lipeng <lipeng321@huawei.com> reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: bug fix of ethtool show the speedDaode Huang1-1/+1
When run ethtool ethX on hns driver, the speed will show as "Unknown". The base.speed is not correct assigned, this patch fix this bug. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Remove redundant memset during buffer releaselipeng1-1/+0
Because all members of desc_cb is assigned when xmit one package, so it can delete in hnae_free_buffer, as follows: - "dma, priv, length, type" are assigned in fill_v2_desc. - "page_offset, reuse_flag, buf" are not used in tx direction. Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Weiwei Deng <dengweiwei@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Optimize the code for GMAC pad and crc Configlipeng1-20/+16
This patch optimises the init configuration code leg for gmac pad and crc set interface. Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: JinchuanTian <tianjinchuan1@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Modify GMAC init TX threshold valuelipeng2-0/+10
This patch reduces GMAC TX threshold value to avoid gmac hang-up with speed 100M/duplex half. Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: JinchuanTian <tianjinchuan1@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Fix the implementation of irq affinity functionlipeng2-46/+30
This patch fixes the implementation of the IRQ affinity function. This function is used to create the cpu mask which eventually is used to initialize the cpu<->queue association for XPS(Transmit Packet Steering). Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02rds: tcp: canonical connection order for all paths with index > 0Sowmini Varadhan1-1/+1
The rds_connect_worker() has a bug in the check that enforces the canonical connection order described in the comments of rds_tcp_state_change(). The intention is to make sure that all the multipath connections are always initiated by the smaller IP address via rds_start_mprds. To achieve this, rds_connection_worker should check that cp_index > 0. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02rds: tcp: allow progress of rds_conn_shutdown if the rds_connection is marked ERROR by an intervening FINSowmini Varadhan1-1/+9
rds_conn_shutdown() runs in workq context, and marks the rds_connection as DISCONNECTING before quiescing Tx/Rx paths. However, after all I/O has quiesced, we may still find the rds_connection state to be RDS_CONN_ERROR if an intervening FIN was processed in softirq context. This is not a fatal error: rds_conn_shutdown() should continue the shutdown, and there is no need to log noisy messages about this event. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02sock: correctly test SOCK_TIMESTAMP in sock_recv_ts_and_drops()Eric Dumazet1-1/+1
It seems the code does not match the intent. This broke packetdrill, and probably other programs. Fixes: 6c7c98bad488 ("sock: avoid dirtying sk_stamp, if possible") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: fix build with gcc-4.4.4Andrew Morton1-2/+6
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_set_rxfh': drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: (near initialization for 'rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1068: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: excess elements in struct initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: (near initialization for 'rrp') gcc-4.4.4 has issues with anonymous union initializers. Work around this. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.