aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/time (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-10-25timers: Prevent base clock corruption when forwardingThomas Gleixner1-13/+10
When a timer is enqueued we try to forward the timer base clock. This mechanism has two issues: 1) Forwarding a remote base unlocked The forwarding function is called from get_target_base() with the current timer base lock held. But if the new target base is a different base than the current base (can happen with NOHZ, sigh!) then the forwarding is done on an unlocked base. This can lead to corruption of base->clk. Solution is simple: Invoke the forwarding after the target base is locked. 2) Possible corruption due to jiffies advancing This is similar to the issue in get_net_timer_interrupt() which was fixed in the previous patch. jiffies can advance between check and assignement and therefore advancing base->clk beyond the next expiry value. So we need to read jiffies into a local variable once and do the checks and assignment with the local copy. Fixes: a683f390b93f("timers: Forward the wheel clock whenever possible") Reported-by: Ashton Holmes <scoopta@gmail.com> Reported-by: Michael Thayer <michael.thayer@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Michal Necasek <michal.necasek@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: knut.osmundsen@oracle.com Cc: stable@vger.kernel.org Cc: stern@rowland.harvard.edu Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20161022110552.253640125@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-25timers: Prevent base clock rewind when forwarding clockThomas Gleixner1-5/+9
Ashton and Michael reported, that kernel versions 4.8 and later suffer from USB timeouts which are caused by the timer wheel rework. This is caused by a bug in the base clock forwarding mechanism, which leads to timers expiring early. The scenario which leads to this is: run_timers() while (jiffies >= base->clk) { collect_expired_timers(); base->clk++; expire_timers(); } So base->clk = jiffies + 1. Now the cpu goes idle: idle() get_next_timer_interrupt() nextevt = __next_time_interrupt(); if (time_after(nextevt, base->clk)) base->clk = jiffies; jiffies has not advanced since run_timers(), so this assignment effectively decrements base->clk by one. base->clk is the index into the timer wheel arrays. So let's assume the following state after the base->clk increment in run_timers(): jiffies = 0 base->clk = 1 A timer gets enqueued with an expiry delta of 63 ticks (which is the case with the USB timeout and HZ=250) so the resulting bucket index is: base->clk + delta = 1 + 63 = 64 The timer goes into the first wheel level. The array size is 64 so it ends up in bucket 0, which is correct as it takes 63 ticks to advance base->clk to index into bucket 0 again. If the cpu goes idle before jiffies advance, then the bug in the forwarding mechanism sets base->clk back to 0, so the next invocation of run_timers() at the next tick will index into bucket 0 and therefore expire the timer 62 ticks too early. Instead of blindly setting base->clk to jiffies we must make the forwarding conditional on jiffies > base->clk, but we cannot use jiffies for this as we might run into the following issue: if (time_after(jiffies, base->clk) { if (time_after(nextevt, base->clk)) base->clk = jiffies; jiffies can increment between the check and the assigment far enough to advance beyond nextevt. So we need to use a stable value for checking. get_next_timer_interrupt() has the basej argument which is the jiffies value snapshot taken in the calling code. So we can just that. Thanks to Ashton for bisecting and providing trace data! Fixes: a683f390b93f ("timers: Forward the wheel clock whenever possible") Reported-by: Ashton Holmes <scoopta@gmail.com> Reported-by: Michael Thayer <michael.thayer@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Michal Necasek <michal.necasek@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: knut.osmundsen@oracle.com Cc: stable@vger.kernel.org Cc: stern@rowland.harvard.edu Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20161022110552.175308322@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-25timers: Lock base for same bucket optimizationThomas Gleixner1-11/+17
Linus stumbled over the unlocked modification of the timer expiry value in mod_timer() which is an optimization for timers which stay in the same bucket - due to the bucket granularity - despite their expiry time getting updated. The optimization itself still makes sense even if we take the lock, because in case that the bucket stays the same, we avoid the pointless queue/enqueue dance. Make the check and the modification of timer->expires protected by the base lock and shuffle the remaining code around so we can keep the lock held when we actually have to requeue the timer to a different bucket. Fixes: f00c0afdfa62 ("timers: Implement optimization for same expiry time in mod_timer()") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610241711220.4983@nanos Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org>
2016-10-25timers: Plug locking race vs. timer migrationThomas Gleixner1-1/+8
Linus noticed that lock_timer_base() lacks a READ_ONCE() for accessing the timer flags. As a consequence the compiler is allowed to reload the flags between the initial check for TIMER_MIGRATION and the following timer base computation and the spin lock of the base. While this has not been observed (yet), we need to make sure that it never happens. Fixes: 0eeda71bc30d ("timer: Replace timer base by a cpu index") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610241711220.4983@nanos Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org>
2016-10-17alarmtimer: Remove unused but set variableTobias Klauser1-2/+0
Remove the set but unused variable base in alarm_clock_get to fix the following warning when building with 'W=1': kernel/time/alarmtimer.c: In function ‘alarm_timer_create’: kernel/time/alarmtimer.c:545:21: warning: variable ‘base’ set but not used [-Wunused-but-set-variable] Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20161017094702.10873-1-tklauser@distanz.ch Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-15Merge tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds1-1/+1
Pull gcc plugins update from Kees Cook: "This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals" * tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: latent_entropy: Mark functions with __latent_entropy gcc-plugins: Add latent_entropy plugin
2016-10-10latent_entropy: Mark functions with __latent_entropyEmese Revfy1-1/+1
The __latent_entropy gcc attribute can be used only on functions and variables. If it is on a function then the plugin will instrument it for gathering control-flow entropy. If the attribute is on a variable then the plugin will initialize it with random contents. The variable must be an integer, an integer array type or a structure with integer fields. These specific functions have been selected because they are init functions (to help gather boot-time entropy), are called at unpredictable times, or they have variable loops, each of which provide some level of latent entropy. Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: expanded commit message] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-10-05timekeeping: Fix __ktime_get_fast_ns() regressionJohn Stultz1-2/+5
In commit 27727df240c7 ("Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code the timekeeping_get_ns() function, but I forgot to include the unit conversion from cycles to nanoseconds, breaking the function's output, which impacts users like perf. This results in bogus perf timestamps like: swapper 0 [000] 253.427536: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426573: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426687: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426800: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426905: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427022: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427127: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427239: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427346: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427463: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 255.426572: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Instead of more reasonable expected timestamps like: swapper 0 [000] 39.953768: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.064839: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.175956: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.287103: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.398217: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.509324: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.620437: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.731546: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.842654: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.953772: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 41.064881: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Add the proper use of timekeeping_delta_to_ns() to convert the cycle delta to nanoseconds as needed. Thanks to Brendan and Alexei for finding this quickly after the v4.8 release. Unfortunately the problematic commit has landed in some -stable trees so they'll need this fix as well. Many apologies for this mistake. I'll be looking to add a perf-clock sanity test to the kselftest timers tests soon. Fixes: 27727df240c7 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING" Reported-by: Brendan Gregg <bgregg@netflix.com> Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Tested-and-reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable <stable@vger.kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13tick/nohz: Prevent stopping the tick on an offline CPUWanpeng Li1-2/+5
can_stop_full_tick() has no check for offline cpus. So it allows to stop the tick on an offline cpu from the interrupt return path, which is wrong and subsequently makes irq_work_needs_cpu() warn about being called for an offline cpu. Commit f7ea0fd639c2c4 ("tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline") added prevention for can_stop_idle_tick(), but forgot to do the same in can_stop_full_tick(). Add it. [ tglx: Massaged changelog ] Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1473245473-4463-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-08Merge branch 'linus' into timers/core, to refresh the branchIngo Molnar1-1/+2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-02tick/nohz: Fix softlockup on scheduler stalls in kvm guestWanpeng Li1-1/+2
tick_nohz_start_idle() is prevented to be called if the idle tick can't be stopped since commit 1f3b0f8243cb934 ("tick/nohz: Optimize nohz idle enter"). As a result, after suspend/resume the host machine, full dynticks kvm guest will softlockup: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0] Call Trace: default_idle+0x31/0x1a0 arch_cpu_idle+0xf/0x20 default_idle_call+0x2a/0x50 cpu_startup_entry+0x39b/0x4d0 rest_init+0x138/0x140 ? rest_init+0x5/0x140 start_kernel+0x4c1/0x4ce ? set_init_arg+0x55/0x55 ? early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x24/0x26 x86_64_start_kernel+0x142/0x14f In addition, cat /proc/stat | grep cpu in guest or host: cpu 398 16 5049 15754 5490 0 1 46 0 0 cpu0 206 5 450 0 0 0 1 14 0 0 cpu1 81 0 3937 3149 1514 0 0 9 0 0 cpu2 45 6 332 6052 2243 0 0 11 0 0 cpu3 65 2 328 6552 1732 0 0 11 0 0 The idle and iowait states are weird 0 for cpu0(housekeeping). The bug is present in both guest and host kernels, and they both have cpu0's idle and iowait states issue, however, host kernel's suspend/resume path etc will touch watchdog to avoid the softlockup. - The watchdog will not be touched in tick_nohz_stop_idle path (need be touched since the scheduler stall is expected) if idle_active flags are not detected. - The idle and iowait states will not be accounted when exit idle loop (resched or interrupt) if idle start time and idle_active flags are not set. This patch fixes it by reverting commit 1f3b0f8243cb934 since can't stop idle tick doesn't mean can't be idle. Fixes: 1f3b0f8243cb934 ("tick/nohz: Optimize nohz idle enter") Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Sanjeev Yadav<sanjeev.yadav@spreadtrum.com> Cc: Gaurav Jindal<gaurav.jindal@spreadtrum.com> Cc: stable@vger.kernel.org Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/1472798303-4154-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-31time: Avoid undefined behaviour in ktime_add_safe()Vegard Nossum1-1/+1
I ran into this: ================================================================================ UBSAN: Undefined behaviour in kernel/time/hrtimer.c:310:16 signed integer overflow: 9223372036854775807 + 50000 cannot be represented in type 'long long int' CPU: 2 PID: 4798 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #91 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010ce6fb88 ffffffff82344740 0000000041b58ab3 ffffffff84f97a20 ffffffff82344694 ffff88010ce6fbb0 ffff88010ce6fb60 000000000000c350 ffff88010ce6f968 dffffc0000000000 ffffffff857bc320 Call Trace: [<ffffffff82344740>] dump_stack+0xac/0xfc [<ffffffff82344694>] ? _atomic_dec_and_lock+0xc4/0xc4 [<ffffffff8242df78>] ubsan_epilogue+0xd/0x8a [<ffffffff8242e6b4>] handle_overflow+0x202/0x23d [<ffffffff8242e4b2>] ? val_to_string.constprop.6+0x11e/0x11e [<ffffffff8236df71>] ? timerqueue_add+0x151/0x410 [<ffffffff81485c48>] ? hrtimer_start_range_ns+0x3b8/0x1380 [<ffffffff81795631>] ? memset+0x31/0x40 [<ffffffff8242e6fd>] __ubsan_handle_add_overflow+0xe/0x10 [<ffffffff81488ac9>] hrtimer_nanosleep+0x5d9/0x790 [<ffffffff814884f0>] ? hrtimer_init_sleeper+0x80/0x80 [<ffffffff813a9ffb>] ? __might_sleep+0x5b/0x260 [<ffffffff8148be10>] common_nsleep+0x20/0x30 [<ffffffff814906c7>] SyS_clock_nanosleep+0x197/0x210 [<ffffffff81490530>] ? SyS_clock_getres+0x150/0x150 [<ffffffff823c7113>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8162ef60>] ? __context_tracking_exit.part.3+0x30/0x1b0 [<ffffffff81490530>] ? SyS_clock_getres+0x150/0x150 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f85aa>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ Add a new ktime_add_unsafe() helper which doesn't check for overflow, but doesn't throw a UBSAN warning when it does overflow either. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-08-31time: Avoid undefined behaviour in timespec64_add_safe()Vegard Nossum1-1/+1
I ran into this: ================================================================================ UBSAN: Undefined behaviour in kernel/time/time.c:783:2 signed integer overflow: 5273 + 9223372036854771711 cannot be represented in type 'long int' CPU: 0 PID: 17363 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #88 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88011457f8f0 ffffffff82344f50 0000000041b58ab3 ffffffff84f98080 ffffffff82344ea4 ffff88011457f918 ffff88011457f8c8 ffff88011457f8e0 7fffffffffffefff ffff88011457f6d8 dffffc0000000000 Call Trace: [<ffffffff82344f50>] dump_stack+0xac/0xfc [<ffffffff82344ea4>] ? _atomic_dec_and_lock+0xc4/0xc4 [<ffffffff8242f4c8>] ubsan_epilogue+0xd/0x8a [<ffffffff8242fc04>] handle_overflow+0x202/0x23d [<ffffffff8242fa02>] ? val_to_string.constprop.6+0x11e/0x11e [<ffffffff823c7837>] ? debug_smp_processor_id+0x17/0x20 [<ffffffff8131b581>] ? __sigqueue_free.part.13+0x51/0x70 [<ffffffff8146d4e0>] ? rcu_is_watching+0x110/0x110 [<ffffffff8242fc4d>] __ubsan_handle_add_overflow+0xe/0x10 [<ffffffff81476ef8>] timespec64_add_safe+0x298/0x340 [<ffffffff81476c60>] ? timespec_add_safe+0x330/0x330 [<ffffffff812f7990>] ? wait_noreap_copyout+0x1d0/0x1d0 [<ffffffff8184bf18>] poll_select_set_timeout+0xf8/0x170 [<ffffffff8184be20>] ? poll_schedule_timeout+0x2b0/0x2b0 [<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260 [<ffffffff833c8a87>] __sys_recvmmsg+0x107/0x790 [<ffffffff833c8980>] ? SyS_recvmsg+0x20/0x20 [<ffffffff81486378>] ? hrtimer_start_range_ns+0x3b8/0x1380 [<ffffffff845f8bfb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60 [<ffffffff8148bcea>] ? do_setitimer+0x39a/0x8e0 [<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260 [<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790 [<ffffffff833c91e9>] SyS_recvmmsg+0xd9/0x160 [<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790 [<ffffffff823c7853>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8162f680>] ? __context_tracking_exit.part.3+0x30/0x1b0 [<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f936a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ Line 783 is this: 783 set_normalized_timespec64(&res, lhs.tv_sec + rhs.tv_sec, 784 lhs.tv_nsec + rhs.tv_nsec); In other words, since lhs.tv_sec and rhs.tv_sec are both time64_t, this is a signed addition which will cause undefined behaviour on overflow. Note that this is not currently a huge concern since the kernel should be built with -fno-strict-overflow by default, but could be a problem in the future, a problem with older compilers, or other compilers than gcc. The easiest way to avoid the overflow is to cast one of the arguments to unsigned (so the addition will be done using unsigned arithmetic). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-08-31timekeeping: Prints the amounts of time spent during suspendRuchi Kandoi1-0/+2
In addition to keeping a histogram of suspend times, also print out the time spent in suspend to dmesg. This helps to keep track of suspend time while debugging using kernel logs. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com> [jstultz: Tweaked commit message] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-08-31clocksource: Defer override invalidation unless clock is unstableKyle Walker1-3/+12
Clocksources don't get the VALID_FOR_HRES flag until they have been checked by a watchdog. However, when using an override, the clocksource_select logic will clear the override value if the clocksource is not marked VALID_FOR_HRES during that inititial check. When using the boot arguments clocksource=<foo>, this selection can run before the watchdog, and can cause the override to be incorrectly cleared. To address this condition, the override_name is only invalidated for unstable clocksources. Otherwise, the override is left intact until after the watchdog has validated the clocksource as stable/unstable. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Kyle Walker <kwalker@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-08-31hrtimer: Spelling fixesPratyush Patel1-2/+2
Fix a minor spelling error. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Pratyush Patel <pratyushpatel.1995@gmail.com> [jstultz: Added commit message] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-08-24timekeeping: Cap array access in timekeeping_debugJohn Stultz1-2/+7
It was reported that hibernation could fail on the 2nd attempt, where the system hangs at hibernate() -> syscore_resume() -> i8237A_resume() -> claim_dma_lock(), because the lock has already been taken. However there is actually no other process would like to grab this lock on that problematic platform. Further investigation showed that the problem is triggered by setting /sys/power/pm_trace to 1 before the 1st hibernation. Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend, and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller than 1970) to the release date of that motherboard during POST stage, thus after resumed, it may seem that the system had a significant long sleep time which is a completely meaningless value. Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the sleep time happened to be set to 1, fls() returns 32 and we add 1 to sleep_time_bin[32], which causes an out of bounds array access and therefor memory being overwritten. As depicted by System.map: 0xffffffff81c9d080 b sleep_time_bin 0xffffffff81c9d100 B dma_spin_lock the dma_spin_lock.val is set to 1, which caused this problem. This patch adds a sanity check in tk_debug_account_sleep_time() to ensure we don't index past the sleep_time_bin array. [jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the issue slightly differently, but borrowed his excelent explanation of the issue here.] Fixes: 5c83545f24ab "power: Add option to log time spent in suspend" Reported-by: Janek Kozicki <cosurgi@gmail.com> Reported-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: linux-pm@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xunlei Pang <xpang@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: stable <stable@vger.kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Link: http://lkml.kernel.org/r/1471993702-29148-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-24timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPINGJohn Stultz1-1/+4
When I added some extra sanity checking in timekeeping_get_ns() under CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns() method was using timekeeping_get_ns(). Thus the locking added to the debug checks broke the NMI-safety of __ktime_get_fast_ns(). This patch open-codes the timekeeping_get_ns() logic for __ktime_get_fast_ns(), so can avoid any deadlocks in NMI. Fixes: 4ca22c2648f9 "timekeeping: Add warnings when overflows or underflows are observed" Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: stable <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1471993702-29148-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-09timers: Fix get_next_timer_interrupt() computationChris Metcalf1-1/+4
The tick_nohz_stop_sched_tick() routine is not properly canceling the sched timer when nothing is pending, because get_next_timer_interrupt() is no longer returning KTIME_MAX in that case. This causes periodic interrupts when none are needed. When determining the next interrupt time, we first use __next_timer_interrupt() to get the first expiring timer in the timer wheel. If no timer is found, we return the base clock value plus NEXT_TIMER_MAX_DELTA to indicate there is no timer in the timer wheel. Back in get_next_timer_interrupt(), we set the "expires" value by converting the timer wheel expiry (in ticks) to a nsec value. But we don't want to do this if the timer wheel expiry value indicates no timer; we want to return KTIME_MAX. Prior to commit 500462a9de65 ("timers: Switch to a non-cascading wheel") we checked base->active_timers to see if any timers were active, and if not, we didn't touch the expiry value and so properly returned KTIME_MAX. Now we don't have active_timers. To fix this, we now just check the timer wheel expiry value to see if it is "now + NEXT_TIMER_MAX_DELTA", and if it is, we don't try to compute a new value based on it, but instead simply let the KTIME_MAX value in expires remain. Fixes: 500462a9de65 "timers: Switch to a non-cascading wheel" Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/1470688147-22287-1-git-send-email-cmetcalf@mellanox.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-58/+7
Pull smp hotplug updates from Thomas Gleixner: "This is the next part of the hotplug rework. - Convert all notifiers with a priority assigned - Convert all CPU_STARTING/DYING notifiers The final removal of the STARTING/DYING infrastructure will happen when the merge window closes. Another 700 hundred line of unpenetrable maze gone :)" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) timers/core: Correct callback order during CPU hot plug leds/trigger/cpu: Move from CPU_STARTING to ONLINE level powerpc/numa: Convert to hotplug state machine arm/perf: Fix hotplug state machine conversion irqchip/armada: Avoid unused function warnings ARC/time: Convert to hotplug state machine clocksource/atlas7: Convert to hotplug state machine clocksource/armada-370-xp: Convert to hotplug state machine clocksource/exynos_mct: Convert to hotplug state machine clocksource/arm_global_timer: Convert to hotplug state machine rcu: Convert rcutree to hotplug state machine KVM/arm/arm64/vgic-new: Convert to hotplug state machine smp/cfd: Convert core to hotplug state machine x86/x2apic: Convert to CPU hotplug state machine profile: Convert to hotplug state machine timers/core: Convert to hotplug state machine hrtimer: Convert to hotplug state machine x86/tboot: Convert to hotplug state machine arm64/armv8 deprecated: Convert to hotplug state machine hwtracing/coresight-etm4x: Convert to hotplug state machine ...
2016-07-25Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds12-526/+741
Pull timer updates from Thomas Gleixner: "This update provides the following changes: - The rework of the timer wheel which addresses the shortcomings of the current wheel (cascading, slow search for next expiring timer, etc). That's the first major change of the wheel in almost 20 years since Finn implemted it. - A large overhaul of the clocksource drivers init functions to consolidate the Device Tree initialization - Some more Y2038 updates - A capability fix for timerfd - Yet another clock chip driver - The usual pile of updates, comment improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits) tick/nohz: Optimize nohz idle enter clockevents: Make clockevents_subsys static clocksource/drivers/time-armada-370-xp: Fix return value check timers: Implement optimization for same expiry time in mod_timer() timers: Split out index calculation timers: Only wake softirq if necessary timers: Forward the wheel clock whenever possible timers/nohz: Remove pointless tick_nohz_kick_tick() function timers: Optimize collect_expired_timers() for NOHZ timers: Move __run_timers() function timers: Remove set_timer_slack() leftovers timers: Switch to a non-cascading wheel timers: Reduce the CPU index space to 256k timers: Give a few structs and members proper names hlist: Add hlist_is_singular_node() helper signals: Use hrtimer for sigtimedwait() timers: Remove the deprecated mod_timer_pinned() API timers, net/ipv4/inet: Initialize connection request timers as pinned timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned timers, drivers/tty/metag_da: Initialize the poll timer as pinned ...
2016-07-24Merge tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds1-0/+1
Pull staging and IIO driver updates from Greg KH: "Here is the big Staging and IIO driver update for 4.8-rc1. We ended up adding more code than removing, again, but it's not all that bad. Lots of cleanups all over the staging tree, and new IIO drivers, full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (417 commits) drivers:iio:accel:mma8452: removed unwanted return statements drivers:iio:accel:mma8452: added cleanup provision in case of failure. iio: Add iio.git tree to MAINTAINERS iio:st_pressure: clean useless static channel initializers iio:st_pressure:lps22hb: temperature support iio:st_pressure:lps22hb: open drain support iio:st_pressure: temperature triggered buffering iio:st_pressure: document sampling gains iio:st_pressure: align storagebits on power of 2 iio:st_sensors: align on storagebits boundaries staging:iio:lis3l02dq drop separate driver iio: accel: st_accel: Add lis3l02dq support iio: adc: add missing of_node references to iio_dev iio: adc: ti-ads1015: add indio_dev->dev.of_node reference iio: potentiometer: Fix typo in Kconfig iio: potentiometer: mcp4531: Add device tree binding iio: potentiometer: mcp4531: Add device tree binding documentation iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x iio:imu:mpu6050: icm20608 initial support iio: adc: max1363: Add device tree binding ...
2016-07-19tick/nohz: Optimize nohz idle enterGaurav Jindal1-2/+1
tick_nohz_start_idle is called before checking whether the idle tick can be stopped. If the tick cannot be stopped, calling tick_nohz_start_idle() is pointless and just wasting CPU cycles. Only invoke tick_nohz_start_idle() when can_stop_idle_tick() returns true. A short one minute observation of the effect on ARM64 shows a reduction of calls by 1.5% thus optimizing the idle entry sequence. [tglx: Massaged changelog ] Co-developed-by: Sanjeev Yadav<sanjeev.yadav@spreadtrum.com> Signed-off-by: Gaurav Jindal<gaurav.jindal@spreadtrum.com> Link: http://lkml.kernel.org/r/20160714120416.GB21099@gaurav.jindal@spreadtrum.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-19clockevents: Make clockevents_subsys staticBen Dooks1-1/+1
The clockevents_subsys struct is used for sysfs support and is not declared or used outside the file it is defined in. Fix the following warning by making it static: kernel/time/clockevents.c:648:17: warning: symbol 'clockevents_subsys' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Cc: linux-kernel@lists.codethink.co.uk Link: http://lkml.kernel.org/r/1466178974-7105-1-git-send-email-ben.dooks@codethink.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-15timers/core: Convert to hotplug state machineRichard Cochran1-23/+2
When tearing down, call timers_dead_cpu() before notify_dead(). There is a hidden dependency between: - timers - block multiqueue - rcutree If timers_dead_cpu() comes later than blk_mq_queue_reinit_notify() that latter function causes a RCU stall. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.566790058@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15hrtimer: Convert to hotplug state machineThomas Gleixner1-35/+5
Split out the clockevents callbacks instead of piggybacking them on hrtimers. This gets rid of a POST_DEAD user. See commit: 54e88fad223c ("sched: Make sure timers have migrated before killing the migration_thread") We just move the callback state to the proper place in the state machine. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.485419196@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11posix_cpu_timer: Exit early when process has been reapedAlexey Dobriyan1-0/+1
Variable "now" seems to be genuinely used unintialized if branch if (CPUCLOCK_PERTHREAD(timer->it_clock)) { is not taken and branch if (unlikely(sighand == NULL)) { is taken. In this case the process has been reaped and the timer is marked as disarmed anyway. So none of the postprocessing of the sample is required. Return right away. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.by Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-07Merge branch 'timers/fast-wheel' into timers/coreIngo Molnar3-472/+677
2016-07-07timers: Implement optimization for same expiry time in mod_timer()Anna-Maria Gleixner1-16/+35
The existing optimization for same expiry time in mod_timer() checks whether the timer expiry time is the same as the new requested expiry time. In the old timer wheel implementation this does not take the slack batching into account, neither does the new implementation evaluate whether the new expiry time will requeue the timer to the same bucket. To optimize that, we can calculate the resulting bucket and check if the new expiry time is different from the current expiry time. This calculation happens outside the base lock held region. If the resulting bucket is the same we can avoid taking the base lock and requeueing the timer. If the timer needs to be requeued then we have to check under the base lock whether the base time has changed between the lockless calculation and taking the lock. If it has changed we need to recalculate under the lock. This optimization takes effect for timers which are enqueued into the less granular wheel levels (1 and above). With a simple test case the functionality has been verified: Before After Match: 5.5% 86.6% Requeue: 94.5% 13.4% Recalc: <0.01% In the non optimized case the timer is requeued in 94.5% of the cases. With the index optimization in place the requeue rate drops to 13.4%. The case where the lockless index calculation has to be redone is less than 0.01%. With a real world test case (networking) we observed the following changes: Before After Match: 97.8% 99.7% Requeue: 2.2% 0.3% Recalc: <0.001% That means two percent fewer lock/requeue/unlock operations done in one of the hot path use cases of timers. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.778527749@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Split out index calculationAnna-Maria Gleixner1-15/+32
For further optimizations we need to seperate index calculation from queueing. No functional change. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.691159619@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Only wake softirq if necessaryThomas Gleixner1-0/+11
With the wheel forwading in place and with the HZ=1000 4ms folding we can avoid running the softirq at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.607650550@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Forward the wheel clock whenever possibleThomas Gleixner3-21/+120
The wheel clock is stale when a CPU goes into a long idle sleep. This has the side effect that timers which are queued end up in the outer wheel levels. That results in coarser granularity. To solve this, we keep track of the idle state and forward the wheel clock whenever possible. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.512039360@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers/nohz: Remove pointless tick_nohz_kick_tick() functionThomas Gleixner1-32/+1
This was a failed attempt to optimize the timer expiry in idle, which was disabled and never revisited. Remove the cruft. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.431073782@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Optimize collect_expired_timers() for NOHZAnna-Maria Gleixner1-8/+41
After a NOHZ idle sleep the timer wheel must be forwarded to current jiffies. There might be expired timers so the current code loops and checks the expired buckets for timers. This can take quite some time for long NOHZ idle periods. The pending bitmask in the timer base allows us to do a quick search for the next expiring timer and therefore a fast forward of the base time which prevents pointless long lasting loops. For a 3 seconds idle sleep this reduces the catchup time from ~1ms to 5us. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.351296290@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Move __run_timers() functionAnna-Maria Gleixner1-26/+26
Move __run_timers() below __next_timer_interrupt() and next_pending_bucket() in preparation for __run_timers() NOHZ optimization. No functional change. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.271872665@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Remove set_timer_slack() leftoversThomas Gleixner1-19/+0
We now have implicit batching in the timer wheel. The slack API is no longer used, so remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew F. Davis <afd@ti.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: David S. Miller <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: John Stultz <john.stultz@linaro.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.189813118@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Switch to a non-cascading wheelThomas Gleixner1-362/+467
The current timer wheel has some drawbacks: 1) Cascading: Cascading can be an unbound operation and is completely pointless in most cases because the vast majority of the timer wheel timers are canceled or rearmed before expiration. (They are used as timeout safeguards, not as real timers to measure time.) 2) No fast lookup of the next expiring timer: In NOHZ scenarios the first timer soft interrupt after a long NOHZ period must fast forward the base time to the current value of jiffies. As we have no way to find the next expiring timer fast, the code loops linearly and increments the base time one by one and checks for expired timers in each step. This causes unbound overhead spikes exactly in the moment when we should wake up as fast as possible. After a thorough analysis of real world data gathered on laptops, workstations, webservers and other machines (thanks Chris!) I came to the conclusion that the current 'classic' timer wheel implementation can be modified to address the above issues. The vast majority of timer wheel timers is canceled or rearmed before expiry. Most of them are timeouts for networking and other I/O tasks. The nature of timeouts is to catch the exception from normal operation (TCP ack timed out, disk does not respond, etc.). For these kinds of timeouts the accuracy of the timeout is not really a concern. Timeouts are very often approximate worst-case values and in case the timeout fires, we already waited for a long time and performance is down the drain already. The few timers which actually expire can be split into two categories: 1) Short expiry times which expect halfways accurate expiry 2) Long term expiry times are inaccurate today already due to the batching which is done for NOHZ automatically and also via the set_timer_slack() API. So for long term expiry timers we can avoid the cascading property and just leave them in the less granular outer wheels until expiry or cancelation. Timers which are armed with a timeout larger than the wheel capacity are no longer cascaded. We expire them with the longest possible timeout (6+ days). We have not observed such timeouts in our data collection, but at least we handle them, applying the rule of the least surprise. To avoid extending the wheel levels for HZ=1000 so we can accomodate the longest observed timeouts (5 days in the network conntrack code) we reduce the first level granularity on HZ=1000 to 4ms, which effectively is the same as the HZ=250 behaviour. From our data analysis there is nothing which relies on that 1ms granularity and as a side effect we get better batching and timer locality for the networking code as well. Contrary to the classic wheel the granularity of the next wheel is not the capacity of the first wheel. The granularities of the wheels are in the currently chosen setting 8 times the granularity of the previous wheel. So for HZ=250 we end up with the following granularity levels: Level Offset Granularity Range 0 0 4 ms 0 ms - 252 ms 1 64 32 ms 256 ms - 2044 ms (256ms - ~2s) 2 128 256 ms 2048 ms - 16380 ms (~2s - ~16s) 3 192 2048 ms (~2s) 16384 ms - 131068 ms (~16s - ~2m) 4 256 16384 ms (~16s) 131072 ms - 1048572 ms (~2m - ~17m) 5 320 131072 ms (~2m) 1048576 ms - 8388604 ms (~17m - ~2h) 6 384 1048576 ms (~17m) 8388608 ms - 67108863 ms (~2h - ~18h) 7 448 8388608 ms (~2h) 67108864 ms - 536870911 ms (~18h - ~6d) That's a worst case inaccuracy of 12.5% for the timers which are queued at the beginning of a level. So the new wheel concept addresses the old issues: 1) Cascading is avoided completely 2) By keeping the timers in the bucket until expiry/cancelation we can track the buckets which have timers enqueued in a bucket bitmap and therefore can look up the next expiring timer very fast and O(1). A further benefit of the concept is that the slack calculation which is done on every timer start is no longer necessary because the granularity levels provide natural batching already. Our extensive testing with various loads did not show any performance degradation vs. the current wheel implementation. This patch does not address the 'fast lookup' issue as we wanted to make sure that there is no regression introduced by the wheel redesign. The optimizations are in follow up patches. This patch contains fixes from Anna-Maria Gleixner and Richard Cochran. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.108621834@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Give a few structs and members proper namesThomas Gleixner1-59/+59
Some of the names in the internal implementation of the timer code are not longer correct and others are simply too long to type. Clean it up before we switch the wheel implementation over to the new scheme. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094341.948752516@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Remove the deprecated mod_timer_pinned() APIThomas Gleixner1-34/+5
We switched all users to initialize the timers as pinned and call mod_timer(). Remove the now unused timer API function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094341.706205231@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07timers: Make 'pinned' a timer propertyThomas Gleixner1-5/+5
We want to move the timer migration logic from a 'push' to a 'pull' model. Under the current 'push' model pinned timers are handled via a runtime API variant: mod_timer_pinned(). The 'pull' model requires us to store the pinned attribute of a timer in the timer_list structure itself, as a new TIMER_PINNED bit in timer->flags. This flag must be set at initialization time and the timer APIs recognize the flag. This patch: - Implements the new flag and associated new-style initialization methods - makes mod_timer() recognize new-style pinned timers, - and adds some migration helper facility to allow step by step conversion of old-style to new-style pinned timers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094341.049338558@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-05tick/broadcast-hrtimer: Set name of the ce_broadcast_hrtimerJisheng Zhang1-0/+1
This is to avoid the "null" name when we either ~ # cat /sys/devices/system/clockevents/broadcast/current_device (null) or ~ # cat /proc/timer_list ... Tick Device: mode: 1 Broadcast device Clock Event Device: (null) ... Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1467709071-3667-1-git-send-email-jszhang@marvell.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-01timers/nohz: Capitalize 'CPU' consistentlyIngo Molnar1-21/+21
While reviewing another patch I noticed that kernel/time/tick-sched.c had a charmingly (confusingly, annoyingly) rich set of variants for spelling 'CPU': cpu cpus CPU CPUs per CPU per-CPU per cpu ... sometimes these were mixed even within the same comment block! Compress these variants down to a single consistent set of: CPU CPUs per-CPU Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-01timers/nohz: Fix several typosWei Jiangang1-5/+5
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: fenghua.yu@intel.com Link: http://lkml.kernel.org/r/1467175910-2966-2-git-send-email-weijg.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-30timekeeping: export get_monotonic_coarse64 symbolGregor Boirie1-0/+1
EXPORT_SYMBOL() get_monotonic_coarse64 for new IIO timestamping clock selection usage. This provides user apps the ability to request a particular IIO device to timestamp samples using a monotonic coarse clock granularity. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-21Merge branch 'fortglx/4.8/time' of https://git.linaro.org/people/john.stultz/linux into timers/coreThomas Gleixner6-24/+28
Pull time(keeping) updates from John Stultz: - Handle the 1ns issue with the old refusing to die vsyscall machinery - More y2038 updates - Documentation fixes - Simplify clocksource handling
2016-06-20timer: Avoid using timespecArnd Bergmann1-3/+3
The tstats_show() function prints a ktime_t variable by converting it to struct timespec first. The algorithm is ok, but we want to stop using timespec in general because of the 32-bit time_t overflow problem. This changes the code to use struct timespec64, without any functional change. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-06-20time: Avoid timespec in udelay_testArnd Bergmann1-8/+8
udelay_test_single() uses ktime_get_ts() to get two timespec values and calculate the difference between them, while udelay_test_show() uses the same to printk() the current monotonic time. Both of these are y2038 safe on all machines, but we want to get rid of struct timespec anyway, so this converts the code to use ktime_get_ns() and ktime_get_ts64() respectively. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-06-20time: Add time64_to_tm()Deepa Dinamani1-5/+6
time_to_tm() takes time_t as an argument. time_t is not y2038 safe. Add time64_to_tm() that takes time64_t as an argument which is y2038 safe. The plan is to eventually replace all calls to time_to_tm() by time64_to_tm(). Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-06-20alarmtimer: Fix comments describing structure fieldsPratyush Patel1-1/+0
Updated struct alarm and struct alarm_timer descriptions. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Pratyush Patel <pratyushpatel.1995@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-06-20timekeeping: Fix 1ns/tick drift with GENERIC_TIME_VSYSCALL_OLDThomas Graziadei1-4/+6
The user notices the problem in a raw and real time drift, calling clock_gettime with CLOCK_REALTIME / CLOCK_MONOTONIC_RAW on a system with no ntp correction taking place (no ntpd or ptp stuff running). The problem is, that old_vsyscall_fixup adds an extra 1ns even though xtime_nsec is already held in full nsecs and the remainder in this case is 0. Do the rounding up buisness only if needed. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Graziadei <thomas.graziadei@omicronenergy.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.