aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/trace/trace_sched_switch.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-10-14ftrace: make some tracers reentrantSteven Rostedt1-8/+2
Now that the ring buffer is reentrant, some of the ftrace tracers (sched_swich, debugging traces) can also be reentrant. Note: Never make the function tracer reentrant, that can cause recursion problems all over the kernel. The function tracer must disable reentrancy. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: preempt disable over interrupt disableSteven Rostedt1-3/+6
With the new ring buffer infrastructure in ftrace, I'm trying to make ftrace a little more light weight. This patch converts a lot of the local_irq_save/restore into preempt_disable/enable. The original preempt count in a lot of cases has to be sent in as a parameter so that it can be recorded correctly. Some places were recording it incorrectly before anyway. This is also laying the ground work to make ftrace a little bit more reentrant, and remove all locking. The function tracers must still protect from reentrancy. Note: All the function tracers must be careful when using preempt_disable. It must do the following: resched = need_resched(); preempt_disable_notrace(); [...] if (resched) preempt_enable_no_resched_notrace(); else preempt_enable_notrace(); The reason is that if this function traces schedule() itself, the preempt_enable_notrace() will cause a schedule, which will lead us into a recursive failure. If we needed to reschedule before calling preempt_disable, we should have already scheduled. Since we did not, this is most likely that we should not and are probably inside a schedule function. If resched was not set, we still need to catch the need resched flag being set when preemption was off and the if case at the end will catch that for us. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make work with new ring bufferSteven Rostedt1-1/+1
This patch ports ftrace over to the new ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: port to tracepointsMathieu Desnoyers1-96/+24
Porting the trace_mark() used by ftrace to tracepoints. (cleanup) Changelog : - Change error messages : marker -> tracepoint [ mingo@elte.hu: conflict resolutions ] Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: 'Peter Zijlstra' <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11ftrace: move sched_switch enable after markersSteven Rostedt1-2/+2
We have two markers now that are enabled on sched_switch. One that records the context switching and the other that records task wake ups. Currently we enable the tracing first and then set the markers. This causes some confusing traces: # tracer: sched_switch # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | trace-cmd-3973 [00] 115.834817: 3973:120:R + 3: 0:S trace-cmd-3973 [01] 115.834910: 3973:120:R + 6: 0:S trace-cmd-3973 [02] 115.834910: 3973:120:R + 9: 0:S trace-cmd-3973 [03] 115.834910: 3973:120:R + 12: 0:S trace-cmd-3973 [02] 115.834910: 3973:120:R + 9: 0:S <idle>-0 [02] 115.834910: 0:140:R ==> 3973:120:R Here we see that trace-cmd with PID 3973 wakes up task 9 but the next line shows the idle task doing a context switch to task 3973. Enabling the tracing to _after_ the markers are set creates a much saner output: # tracer: sched_switch # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <idle>-0 [02] 7922.634225: 0:140:R ==> 4790:120:R trace-cmd-4789 [03] 7922.634225: 0:140:R + 4790:120:R Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16namespacecheck: fixesIngo Molnar1-2/+2
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-26ftrace: fix up cmdline recordingSteven Rostedt1-6/+15
The new work with converting the trace hooks over to markers broke the command line recording of ftrace. This patch fixes it again. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26ftrace: move ftrace_special to trace.cSteven Rostedt1-24/+0
Move the ftrace_special out of sched_switch to trace.c. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: pq@iki.fi Cc: proski@gnu.org Cc: sandmann@redhat.com Cc: a.p.zijlstra@chello.nl Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23Port ftrace to markersMathieu Desnoyers1-28/+143
Porting ftrace to the marker infrastructure. Don't need to chain to the wakeup tracer from the sched tracer, because markers support multiple probes connected. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: fix comm on function trace outputSteven Rostedt1-2/+5
In cleaning up of the sched_switch code, the function trace recording of task comms was removed. This patch adds back the recording of comms for function trace. The output of ftrace now has the task comm instead of <...>. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: remove add-hoc codeIngo Molnar1-8/+2
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: sched specialIngo Molnar1-0/+24
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: fix cmdline tracingIngo Molnar1-4/+4
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: trace scheduler rbtreeIngo Molnar1-2/+4
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: sched tracer, trace full rbtreeIngo Molnar1-8/+16
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: add wakeup events to sched tracerIngo Molnar1-0/+36
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: remove notraceIngo Molnar1-6/+6
now that we have a kbuild method for notrace, no need to pollute the C code with the annotations. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: timestamp syncing, prepareIngo Molnar1-1/+1
rename and uninline now() to ftrace_now(). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: add self-testsSteven Rostedt1-0/+3
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: don't use raw_local_irq_save/restoreSteven Rostedt1-2/+2
Using raw_local_irq_save/restore confuses lockdep. It's fine to use the normal ones. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23ftrace: add tracing of context switchesSteven Rostedt1-0/+116
This patch adds context switch tracing, of the format of: _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | pid:prio:state \ / ||||| \ | / swapper-0 1d..3 137us+: 0:140:R --> 2912:120 sshd-2912 1d..3 216us+: 2912:120:S --> 0:140 swapper-0 1d..3 261us+: 0:140:R --> 2912:120 bash-2920 0d..3 267us+: 2920:120:S --> 0:140 sshd-2912 1d..3 330us!: 2912:120:S --> 0:140 swapper-0 1d..3 2389us+: 0:140:R --> 2847:120 yum-upda-2847 1d..3 2411us!: 2847:120:S --> 0:140 swapper-0 0d..3 11089us+: 0:140:R --> 3139:120 gdm-bina-3139 0d..3 11113us!: 3139:120:S --> 0:140 swapper-0 1d..3 102328us+: 0:140:R --> 2847:120 yum-upda-2847 1d..3 102348us!: 2847:120:S --> 0:140 "sched_switch" is added to /debugfs/tracing/available_tracers [ Eugene Teo <eugeneteo@kernel.sg: remove unused tracing_sched_switch_enabled ] Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.