aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/user.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2013-09-09dmaengine: dma_sync_wait and dma_find_channel undefinedJon Mason1-2/+10
dma_sync_wait and dma_find_channel are declared regardless of whether CONFIG_DMA_ENGINE is enabled, but calling the function without CONFIG_DMA_ENGINE enabled results "undefined reference" errors. To get around this, declare dma_sync_wait and dma_find_channel as inline functions if CONFIG_DMA_ENGINE is undefined. Signed-off-by: Jon Mason <jon.mason@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-09-09clk: only call get_parent if there is oneAlex Elder1-1/+1
In __clk_init(), after a clock is mostly initialized, a scan is done of the orphan clocks to see if the clock being registered is the parent of any of them. This code assumes that any clock that provides a get_parent method actually has at least one parent, and that's not a valid assumption. As a result, an orphan clock with no parent can return *something* as the parent index, and that value is blindly used to dereference the orphan's parent_names[] array (which will be ZERO_SIZE_PTR or NULL). Fix this by ensuring get_parent is only called for orphans with at least one parent. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-09direct-io: Use return from cmpxchg to decide of assignment happenedOlof Johansson1-2/+3
Not using the return value can in the generic case be racy, so it's in general good practice to check the return value instead. This also resolved the warning caused on ARM and other architectures: fs/direct-io.c: In function 'sb_init_dio_done_wq': fs/direct-io.c:557:2: warning: value computed is not used [-Wunused-value] Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: H Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-09MAINTAINERS: update email for Dan WilliamsDan Williams1-9/+9
Returned to intel.com Cc: Vinod Koul <vinod.koul@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jon Mason <jon.mason@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Neil Brown <neilb@suse.de> Cc: Shaohua Li <shli@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-09-09dma: mv_xor: Fix incorrect error pathSachin Kamat1-4/+2
Return directly if memory allocation fails. There is no need of dma_free_coherent(). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-09-08vfs: fix dentry RCU to refcounting possibly sleeping dput()Linus Torvalds1-53/+49
This is the fix that the last two commits indirectly led up to - making sure that we don't call dput() in a bad context on the dentries we've looked up in RCU mode after the sequence count validation fails. This basically expands d_rcu_to_refcount() into the callers, and then fixes the callers to delay the dput() in the failure case until _after_ we've dropped all locks and are no longer in an RCU-locked region. The case of 'complete_walk()' was trivial, since its failure case did the unlock_rcu_walk() directly after the call to d_rcu_to_refcount(), and as such that is just a pure expansion of the function with a trivial movement of the resulting dput() to after 'unlock_rcu_walk()'. In contrast, the unlazy_walk() case was much more complicated, because not only does convert two different dentries from RCU to be reference counted, but it used to not call unlock_rcu_walk() at all, and instead just returned an error and let the caller clean everything up in "terminate_walk()". Happily, one of the dentries in question (called "parent" inside unlazy_walk()) is the dentry of "nd->path", which terminate_walk() wants a refcount to anyway for the non-RCU case. So what the new and improved unlazy_walk() does is to first turn that dentry into a refcounted one, and once that is set up, the error cases can continue to use the terminate_walk() helper for cleanup, but for the non-RCU case. Which makes it possible to drop out of RCU mode if we actually hit the sequence number failure case. Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-09virtio_pci: pm: Use CONFIG_PM_SLEEP instead of CONFIG_PMAaron Lu1-2/+2
The virtio_pci_freeze/restore are defined under CONFIG_PM but is used by SET_SYSTEM_SLEEP_PM_OPS macro, which is defined under CONFIG_PM_SLEEP. So if CONFIG_PM_SLEEP is not cofigured but CONFIG_PM_RUNTIME is, the following warning message appeared: drivers/virtio/virtio_pci.c:770:12: warning: ‘virtio_pci_freeze’ defined but not used [-Wunused-function] static int virtio_pci_freeze(struct device *dev) ^ drivers/virtio/virtio_pci.c:790:12: warning: ‘virtio_pci_restore’ defined but not used [-Wunused-function] static int virtio_pci_restore(struct device *dev) ^ Fix it by changing CONFIG_PM to CONFIG_PM_SLEEP. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-09-08vfs: use lockred "dead" flag to mark unrecoverably dead dentriesLinus Torvalds2-25/+15
This simplifies the RCU to refcounting code in particular. I was originally intending to leave this for later, but walking through all the dput() logic (see previous commit), I realized that the dput() "might_sleep()" check was misleadingly weak. And I removed it as misleading, both for performance profiling and for debugging. However, the might_sleep() debugging case is actually true: the final dput() can indeed sleep, if the inode of the dentry that you are releasing ends up sleeping at iput time (see dentry_iput()). So the problem with the might_sleep() in dput() wasn't that it wasn't true, it was that it wasn't actually testing and triggering on the interesting case. In particular, just about *any* dput() can indeed sleep, if you happen to race with another thread deleting the file in question, and you then lose the race to the be the last dput() for that file. But because it's a very rare race, the debugging code would never trigger it in practice. Why is this problematic? The new d_rcu_to_refcount() (see commit 15570086b590: "vfs: reimplement d_rcu_to_refcount() using lockref_get_or_lock()") does a dput() for the failure case, and it does it under the RCU lock. So potentially sleeping really is a bug. But there's no way I'm going to fix this with the previous complicated "lockref_get_or_lock()" interface. And rather than revert to the old and crufty nested dentry locking code (which did get this right by delaying the reference count updates until they were verified to be safe), let's make forward progress. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-08vfs: reorganize dput() memory accessesLinus Torvalds2-10/+11
This is me being a bit OCD after all the dentry optimization work this merge window: profiles end up showing 'dput()' as a rather expensive operation, and there were two unrelated bad reasons for that. The first reason was reading d_lockref.count for debugging purposes, which touches the lockref cacheline (for reads) before really need to. More importantly, the debugging test in question is _wrong_, and has hidden bugs. It's true that we can only sleep when the count goes down to zero, but the test as-is hides the much more subtle bug that happens if we race with somebody else deleting the file. Anyway we _will_ touch that cacheline, but let's do it for a write and in the right routine (ie in "lockref_put_or_lock()") which annotates the costs better. So remove the misleading debug code. The other was an unnecessary access to the cacheline that contains the d_lru list, just to check whether we already were on the LRU list or not. This is exactly what we have d_flags for, so that we can avoid touching extra cache lines for the common case. So just add another bit for "is this dentry on the LRU". Finally, mark the tests properly likely/unlikely, so that the common fast-paths are dense in the instruction stream. This makes the profiles look much saner. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-07lockref: add ability to mark lockrefs "dead"Linus Torvalds2-0/+41
The only actual current lockref user (dcache) uses zero reference counts even for perfectly live dentries, because it's a cache: there may not be any users, but that doesn't mean that we want to throw away the dentry. At the same time, the dentry cache does have a notion of a truly "dead" dentry that we must not even increment the reference count of, because we have pruned it and it is not valid. Currently that distinction is not visible in the lockref itself, and the dentry cache validation uses "lockref_get_or_lock()" to either get a new reference to a dentry that already had existing references (and thus cannot be dead), or get the dentry lock so that we can then verify the dentry and increment the reference count under the lock if that verification was successful. That's all somewhat complicated. This adds the concept of being "dead" to the lockref itself, by simply using a count that is negative. This allows a usage scenario where we can increment the refcount of a dentry without having to validate it, and pushing the special "we killed it" case into the lockref code. The dentry code itself doesn't actually use this yet, and it's probably too late in the merge window to do that code (the dentry_kill() code with its "should I decrement the count" logic really is pretty complex code), but let's introduce the concept at the lockref level now. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-07NFSv4: use mach cred for SECINFO_NO_NAME w/ integrityWeston Andros Adamson1-4/+37
Commit 97431204ea005ec8070ac94bc3251e836daa7ca7 introduced a regression that causes SECINFO_NO_NAME to fail without sending an RPC if: 1) the nfs_client's rpc_client is using krb5i/p (now tried by default) 2) the current user doesn't have valid kerberos credentials This situation is quite common - as of now a sec=sys mount would use krb5i for the nfs_client's rpc_client and a user would hardly be faulted for not having run kinit. The solution is to use the machine cred when trying to use an integrity protected auth flavor for SECINFO_NO_NAME. Older servers may not support using the machine cred or an integrity protected auth flavor for SECINFO_NO_NAME in every circumstance, so we fall back to using the user's cred and the filesystem's auth flavor in this case. We run into another problem when running against linux nfs servers - they return NFS4ERR_WRONGSEC when using integrity auth flavor (unless the mount is also that flavor) even though that is not a valid error for SECINFO*. Even though it's against spec, handle WRONGSEC errors on SECINFO_NO_NAME by falling back to using the user cred and the filesystem's auth flavor. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-07NFS: nfs_compare_super shouldn't check the auth flavour unless 'sec=' was setTrond Myklebust1-2/+15
Also don't worry about obsolete mount flags... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-07lockref: fix docbook argument namesLinus Torvalds1-4/+4
The code got rewritten, but the comments got copied as-is from older versions, and as a result the argument name in the comment didn't actually match the code any more. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-07NFSv4: Allow security autonegotiation for submountsTrond Myklebust2-5/+19
In cases where the parent super block was not mounted with a 'sec=' line, allow autonegotiation of security for the submounts. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-07NFSv4: Disallow security negotiation for lookups when 'sec=' is specifiedTrond Myklebust1-1/+3
Ensure that nfs4_proc_lookup_common respects the NFS_MOUNT_SECFLAVOUR flag. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-07NFSv4: Fix security auto-negotiationTrond Myklebust6-18/+30
NFSv4 security auto-negotiation has been broken since commit 4580a92d44e2b21c2254fa5fef0f1bfb43c82318 (NFS: Use server-recommended security flavor by default (NFSv3)) because nfs4_try_mount() will automatically select AUTH_SYS if it sees no auth flavours. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Chuck Lever <chuck.lever@oracle.com>
2013-09-07NFS: Clean up nfs_parse_security_flavors()Trond Myklebust1-12/+13
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-07NFS: Clean up the auth flavour array messTrond Myklebust2-13/+28
What is the point of having a 'auth_flavor_len' field, if it is always set to 1, and can't be used to determine if the user has selected an auth flavour? This cleanup goes back to using auth_flavor_len for its original intended purpose, and gets rid of the ad-hoc replacements. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-07Revert "Input: introduce BTN/ABS bits for drums and guitars"Linus Torvalds5-433/+3
This reverts commits 61e00655e9cb, 73f8645db191 and 8e22ecb603c8: "Input: introduce BTN/ABS bits for drums and guitars" "HID: wiimote: add support for Guitar-Hero drums" "HID: wiimote: add support for Guitar-Hero guitars" The extra new ABS_xx values resulted in ABS_MAX no longer being a power-of-two, which broke the comparison logic. It also caused the ioctl numbers to overflow into the next byte, causing problems for that. We'll try again for 3.13. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-07um: Add irq chip um/mask handlersRichard Weinberger1-0/+4
These handlers are not optional and need in our case dummy implementions to avoid NULL pointer bugs within the irq core code. Reported-and-tested-by: Toralf Foester <toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2013-09-07um: prctl: Do not include linux/ptrace.hRichard Weinberger1-1/+1
On recent toolchains we hit: In file included from arch/x86/um/os-Linux/prctl.c:7:0: /usr/include/linux/ptrace.h:58:8: error: redefinition of ‘struct ptrace_peeksiginfo_args’ struct ptrace_peeksiginfo_args { ^ In file included from arch/x86/um/os-Linux/prctl.c:6:0: /usr/include/sys/ptrace.h:191:8: note: originally defined here struct ptrace_peeksiginfo_args ^ make[2]: *** [arch/x86/um/os-Linux/prctl.o] Error 1 make[1]: *** [arch/x86/um/os-Linux] Error 2 make: *** [arch/x86/um] Error 2 The solution is not to include linux/ptrace.h and obtain the arch specific ptrace command from asm/ptrace.h. Reported-and-tested-by: David Oberhollenzer <david.oberhollenzer@tele2.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2013-09-07um: Run UML in it's own session.Richard Weinberger1-0/+2
If UML is not run by a shell it can happen that UML will kill unrelated proceses upon a fatal exit because it issues a kill(0, ...). To prevent such oddities we create a new session in main(). Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2013-09-07um: Cleanup SIGTERM handlingRichard Weinberger8-12/+16
Richard reported that some UML processes survive if the UML main process receives a SIGTERM. This issue was caused by a wrongly placed signal(SIGTERM, SIG_DFL) in init_new_thread_signals(). It disabled the UML exit handler accidently for some processes. The correct solution is to disable the fatal handler for all UML helper threads/processes. Such that last_ditch_exit() does not get called multiple times and all processes can exit due to SIGTERM. Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2013-09-07um: ubd: Introduce submit_request()Richard Weinberger1-13/+19
Just a clean-up patch to remove the open coded variants and to ensure that all requests are submitted the same way. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-09-07um: ubd: Add REQ_FLUSH suppportRichard Weinberger3-1/+50
UML's block device driver does not support write barriers, to support this this patch adds REQ_FLUSH suppport. Every time the block layer sends a REQ_FLUSH we fsync() now our backing file to guarantee data consistency. Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2013-09-07um: Implement probe_kernel_read()Richard Weinberger4-1/+78
UML needs it's own probe_kernel_read() to handle kernel mode faults correctly. The implementation uses mincore() on the host side to detect whether a page is owned by the UML kernel process. This fixes also a possible crash when sysrq-t is used. Starting with 3.10 sysrq-t calls probe_kernel_read() to read details from the kernel workers. As kernel worker are completely async pointers may turn NULL while reading them. Cc: <stian@nixia.no> Cc: <tj@kernel.org> Cc: <stable@vger.kernel.org> # 3.10.x Signed-off-by: Richard Weinberger <richard@nod.at>
2013-09-07um: hostfs: Fix writebackRichard Weinberger1-1/+8
We have to implement ->release() and trigger writeback from it. Otherwise we might lose dirty pages at munmap(). Signed-off-by: Richard Weinberger <richard@nod.at>
2013-09-07Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"Herbert Xu12-43/+1082
This patch reinstates commits 67822649d7305caf3dd50ed46c27b99c94eff996 39761214eefc6b070f29402aa1165f24d789b3f7 0b95a7f85718adcbba36407ef88bba0a7379ed03 31d939625a9a20b1badd2d4e6bf6fd39fa523405 2d31e518a42828df7877bca23a958627d60408bc Now that module softdeps are in the kernel we can use that to resolve the boot issue which cause the revert. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-06clk: samsung: exynos5250: Simplify registration of PLL rate tablesTomasz Figa1-10/+2
Since the _get_rate() helper has been modified to use __clk_lookup() internally, checking of PLL input rates can be done using it and so the registration code can be simplified. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Register PLL rate tables for Exynos4x12Tomasz Figa1-0/+49
This patch adds rate tables for PLLs that can be reconfigured at runtime for Exynos4x12 SoCs. Provided tables contain PLL coefficients for input clock of 24 MHz and so are registered only in this case. MPLL does not need runtime reconfiguration and so table for it is not provided. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Register PLL rate tables for Exynos4210Tomasz Figa1-0/+45
This patch adds rate tables for PLLs that can be reconfigured at runtime for Exynos4210 SoCs. Provided tables contain PLL coefficients for input clock of 24 MHz and so are registered only in this case. MPLL does not need runtime reconfiguration and so table for it is not provided. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Reorder registration of mout_vpllsrcTomasz Figa1-1/+7
Since PLL input frequency must be known before PLL registration, mout_vpllsrc clock which is a reference clock of VPLL must be registered before VPLL. This patch reorders clock registration to register mout_vpllsrc before VPLL. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: pll: Add support for rate configuration of PLL46xxTomasz Figa2-1/+135
This patch implements round_rate and set_rate callbacks of PLL46xx driver to allow reconfiguration of PLL at runtime. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: pll: Use new registration method for PLL46xxTomasz Figa3-65/+14
This patch modifies PLL46xx support code and its users to use the recently introduced common PLL registration helper. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: pll: Add support for rate configuration of PLL45xxTomasz Figa2-1/+119
This patch implements round_rate and set_rate callbacks of PLL45xx driver to allow reconfiguration of PLL at runtime. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: pll: Use new registration method for PLL45xxTomasz Figa3-62/+20
This patch modifies PLL45xx support code and its users to use the recently introduced common PLL registration helper. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_pllsTomasz Figa1-3/+3
This array defines PLLs specific to Exynos 4x12 SoCs and not for all Exynos 4 SoCs, so the name should represent that. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Remove checks for DT nodeTomasz Figa1-7/+4
Exynos 4 supports only DT based bootup, so non-DT cases does not need to be handled anymore. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Remove unused static clkdev aliasesTomasz Figa1-184/+172
Since Exynos does not support legacy non-DT boot anymore, most of clock lookups happen using device tree, so most of static clkdev aliases are no longer necessary. This patch removes them. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: Modify _get_rate() helper to use __clk_lookup()Tomasz Figa3-9/+7
There is no need to use clkdev inside the clock driver to retrieve the clocks for internal use. Instead __clk_lookup() helper can be used to look up clocks by their platform name. This patch modifies the behavior of _get_rate() helper to look up clocks by platform name and adjusts all users of it to pass platform names instead of clkdev aliases. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Use separate aliases for cpufreq related clocksTomasz Figa1-8/+27
Exynos cpufreq driver is the only remaining piece of code that needs static clkdev aliases for operation, because it can not do device tree based clock lookups yet. This patch moves clock alias definitions for those clocks to separate arrays that can be used with samsung_clk_register_alias() helper. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clocksource: samsung_pwm_timer: Get clock from device treeTomasz Figa1-4/+8
When booting with device tree static clkdev aliases should not be used. This patch modifies the samsung_pwm_timer driver to use DT-based clock lookup when booting with device tree. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06ARM: dts: exynos4: Specify PWM clocks in PWM nodeTomasz Figa1-0/+2
Since pwm-samsung bindings require at least one clock to be specified, this patch adds the missing clocks and clock-names properties to specify clocks used by PWM block on Exynos4 SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06pwm: samsung: Update DT bindings documentation to cover clocksTomasz Figa1-0/+12
PWM driver consumes at least one and up to three clocks, which need to be specified in device tree when used. This patch updates bindings documentation to add information about clocks. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06NVMe: Merge issue on character device bring-upKeith Busch1-4/+8
A recent patch made it possible to bring up the character handle when the device is responsive but not accepting a set-features command. Another recent patch moved the initialization that requires we move where the checks for this condition occur. This patch merges these two ideas so it works much as before. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-06ceph: use d_invalidate() to invalidate aliasesYan, Zheng1-4/+4
d_invalidate() is the standard VFS method to invalidate dentry. compare to d_delete(), it also try shrinking children dentries. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-06ceph: remove ceph_lookup_inode()Yan, Zheng3-11/+1
commit 6f60f889 (ceph: fix freeing inode vs removing session caps race) introduced ceph_lookup_inode(). But there is already a ceph_find_inode() which provides similar function. So remove ceph_lookup_inode(), use ceph_find_inode() instead. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <alex.elder@linary.org> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-06NFSv4.1 Use MDS auth flavor for data server connectionAndy Adamson4-8/+146
Commit 4edaa308 "NFS: Use "krb5i" to establish NFSv4 state whenever possible" uses the nfs_client cl_rpcclient for all state management operations, and will use krb5i or auth_sys with no regard to the mount command authflavor choice. The MDS, as any NFSv4.1 mount point, uses the nfs_server rpc client for all non-state management operations with a different nfs_server for each fsid encountered traversing the mount point, each with a potentially different auth flavor. pNFS data servers are not mounted in the normal sense as there is no associated nfs_server structure. Data servers can also export multiple fsids, each with a potentially different auth flavor. Data servers need to use the same authflavor as the MDS server rpc client for non-state management operations. Populate a list of rpc clients with the MDS server rpc client auth flavor for the DS to use. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-06tcp: properly increase rcv_ssthresh for ofo packetsEric Dumazet1-1/+4
TCP receive window handling is multi staged. A socket has a memory budget, static or dynamic, in sk_rcvbuf. Because we do not really know how this memory budget translates to a TCP window (payload), TCP announces a small initial window (about 20 MSS). When a packet is received, we increase TCP rcv_win depending on the payload/truesize ratio of this packet. Good citizen packets give a hint that it's reasonable to have rcv_win = sk_rcvbuf/2 This heuristic takes place in tcp_grow_window() Problem is : We currently call tcp_grow_window() only for in-order packets. This means that reorders or packet losses stop proper grow of rcv_win, and senders are unable to benefit from fast recovery, or proper reordering level detection. Really, a packet being stored in OFO queue is not a bad citizen. It should be part of the game as in-order packets. In our traces, we very often see sender is limited by linux small receive windows, even if linux hosts use autotuning (DRS) and should allow rcv_win to grow to ~3MB. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-06net: add documentation for BQL helpersFlorian Fainelli1-0/+26
Provide a kernel-doc comment documentation for the BQL helpers: - netdev_sent_queue - netdev_completed_queue - netdev_reset_queue Similarly to how it is done for the other functions, the documentation only covers the function operating on struct net_device and not struct netdev_queue. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.