aboutsummaryrefslogtreecommitdiffstats
path: root/kernel (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2010-02-16CAPI: Clean up capiminor_*_ackJan Kiszka1-12/+7
No need for irqsave acquisition of acklock, bh-safe is sufficient. Moverover, move kfree out of the lock and do not take acklock at all in capiminor_del_all_ack as we are the last user of the list here. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Fix locking around capiminor's output queue and drop workaround_lockJan Kiszka1-59/+67
Introduce outlock as a spin lock that protects capiminor's outqueue, outbytes and outskb (formerly known as ttyskb). outlock can be acquired from soft-IRQ context via capinc_write, so make it bh-safe. This finally removes the last reason for keeping the workaround lock around (which was incomplete and partly broken anyway). And as we no longer call handle_recv_skb in atomic context, gen_data_b3_resp_for can use non-atomic allocation now. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Drop capiminor's unused inbytes counterJan Kiszka1-7/+3
The inbytes counter was only updated but never read. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Use atomics for capiminor's datahandle and msgidJan Kiszka1-9/+7
The capiminor members datahandle and msgid are incremented outside any lock, so better do this atomically. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rename datahandle_queue -> ackqueue_entryJan Kiszka1-4/+4
This struct is describing a queue entry, not the queue itself. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework capiminor RX handlerJan Kiszka1-22/+38
Avoid re-queuing skbs unless the error detected in handle_recv_skb is expected to be recoverable such as lacking memory, a full CAPI queue, a full TTY input buffer, or a not yet existing TTY. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Drop handle_minor_recv from capinc_tty_writeJan Kiszka1-1/+0
Sending a message down the CAPI stack may trigger the reception of an answer, but this will go through capi_recv_message and call handle_minor_recv from there. There is no need to walk the receive queue on capinc_tty_write. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Drop atomic ttyopencountJan Kiszka1-20/+10
Not needed, tty->count keeps track of this information. At this chance, drop traces of ancient attempts to debug this logic via _DEBUG_REFCOUNT. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Clean up capiminors_lockJan Kiszka1-12/+9
Use a plain spin lock for capiminors_lock, drop inconsistent irqsafe acquisitions (it's only used in process context anyway). Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Drop obsolete nccip from capiminor structJan Kiszka1-43/+1
The nccip in capiminor used to serve as an indicator that the NCCI was close. But we don't need this, we issue a hangup on capincci_free_minor. So drop this legacy. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Issue synchronous hangup on capincci_free_minorJan Kiszka1-1/+1
capincci_free and, thus, capincci_free_minor runs in process context, so we can issue the hangup of the associated TTY synchronously. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Drop remaining NULL checks on tty->driver_dataJan Kiszka1-33/+31
tty_struct's driver_data cannot be NULL, no need to test for it. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Use tty_port to keep track of capiminor's ttyJan Kiszka1-32/+62
Use the reference management features of tty_port to look up and drop again the tty_struct associated with a capiminor. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Establish install/cleanup handlers for capiminor TTYsJan Kiszka1-14/+28
Properly associate/disassociate a capiminor object with its TTY via the install/cleanup handlers instead of trying to guess first open and last close. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Use kref on capiminorJan Kiszka1-9/+28
Install a reference counter for capiminor objects. Acquire it when obtaining a capiminor from the array during capinc_tty_open, drop it when closing the tty again. Another reference is held for the hook-up with capincci. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Use dynamic major for NCCI TTYs by defaultJan Kiszka1-6/+4
No need to allocate a fixed major for this TTY, both capifs and udev make this transparent to the user. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Dynamically register minor devicesJan Kiszka1-11/+24
Register capiminors dynamically with the TTY core so that udev can make them show up as the NCCIs appear or disappear. This removes the need to check if the capiminor requested in capinc_tty_open actually exists. And this completely obsoletes capifs which will be scheduled for removal in a later patch. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Clean up capinc_tty_init/exitJan Kiszka1-10/+10
Return proper error code if tty_register_driver fails. In contrast, tty_unregister_driver cannot practically fail, so drop that error handling. Finally, mark capinc_tty_init/exit with __init/__exit. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Switch capiminor list to arrayJan Kiszka1-40/+35
Using a plain array of pointers simplifies the management of capiminors. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Switch NCCI list to standard doubly linked listJan Kiszka1-32/+20
Replace open-coded NCCI list management with standard mechanisms. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Fix racy capi_readJan Kiszka1-12/+7
capi_read still used interruptible_sleep_on, risking to miss a wakeup this way. Convert it to wait_event_interruptible. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Use non-atomic allocation during NCCI setupJan Kiszka1-2/+2
Both capincci_alloc and capiminor_alloc run in non-atomic context, update their memory allocations accordingly. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework locking of capidev membersJan Kiszka1-93/+88
Rename 'ncci_list_mtx' to 'lock', expressing that it now protects a larger set of capidev members: the NCCI list, ap.applid (ie. the registration of the application), and modifications of userflags. We do not need to protect each and every check for ap.applid because, once an application is registered, it will stay for the whole lifetime of the device. Also, there is no need to apply the capidev mutex during release (if there could be concurrent users, we would crash them anyway by freeing the device at the end of capi_release). Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Clean up capi_open/releaseJan Kiszka1-59/+34
Fold capidev_alloc and capidev_free into capi_open and capi_release - there are no other users. Someone pushed a lock_kernel into capi_open. Drop it, we don't need it. Also remove the useless test from open that checks for private_data == NULL. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Convert capidev_list_lock into a mutexJan Kiszka1-12/+12
No need for anything "harder" here (specifically no need for irqsave...). Also, make the list removal the first operation of capidev_free to avoid dumping half-released devices via /proc. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Reduce #ifdef mess around CONFIG_ISDN_CAPI_MIDDLEWAREJan Kiszka1-67/+83
Make the code a bit more readable be providing stub functions for the !CONFIG_ISDN_CAPI_MIDDLEWARE case. Though a few lines are moved around, this comes with no functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework application lockingJan Kiszka2-34/+29
Drop the application rw-lock in favour of RCU. This synchronizes capi20_release against capi_ctr_handle_message which may dereference an application from (soft-)IRQ context. Any other access to the application list is now protected by the capi_controller_lock as well. This also allows to safely inspect applications for /proc dumping by holding capi_controller_lock. At this chance, drop some useless release_in_progress checks where we obtained the application pointer from the list (which becomes NULL on release_in_progress). Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework locking of controller data structuresJan Kiszka4-89/+217
This patch applies the mutex so far only protecting the controller list to (almost) all accesses of controller data structures. It also reworks waiting on state changes in old_capi_manufacturer so that it no longer poll and holds a module reference to the controller owner while waiting (the latter was partly done already). Modification and checking of the blocked state remains racy by design, the caller is responsible for dealing with this. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework controller state notifierJan Kiszka3-79/+72
Another step towards proper locking: Rework the callback provided to capidrv for controller state changes. This is so far attached to an application, which would require us to hold the corresponding lock across notification calls. But there is no direct relation between a controller up/down event and an application, so let's decouple them and provide a notifier call chain for those events instead. This notifier chain is first of all used internally. Here we request the highest priority to unsure that housekeeping work is done before any other notifications. The chain is exported via [un]register_capictr_notifier to our only user, capidrv, to replace the racy and unfixable capi20_set_callback. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework capi_ctr_ready/downJan Kiszka1-45/+50
This step prepares the application of proper controller locking: Push all state changing work into the notify handler that are called by capi_ctr_ready and capi_ctr_down, switch detach_capi_ctr to issue a synchronous ctr_down. Also ensure that we do not go through any action if the state did not change. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Convert capi drivers rwlock into mutexJan Kiszka3-32/+27
Turn the lock protecting registered capi drivers into a mutex and apply it consistently. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Call a controller 'controller', not 'card'Jan Kiszka4-169/+178
At least for our internal use, fix the misnomers that refer to a CAPI controller as 'card'. No functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Reduce chattiness during module loading/removalJan Kiszka4-83/+9
The CVS revisions dumped by all CAPI modules are meaningless today. And that some CAPI module is loaded or removed does not necessarily deserve a message. Just keep the message of the central module, capi.ko, drop the rest. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Pin capifs instead of mounting itJan Kiszka1-9/+18
Auto-mounting the capifs during module init prevents unloading its module. Instead, pin the filesystem as long as some NCCI node exists. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Eliminate capifs_root variableJan Kiszka1-8/+10
capifs_mnt->mnt_sb->s_root already contains what we need. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Sanitize capifs APIJan Kiszka3-31/+54
Instead of looking up the dentry of an NCCI node again in capifs_free_ncci pass the pointer via the capifs user. This patch also reduces the #ifdef mess in capi.c a bit as far as capifs was causing it. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Fix leaks in capifs_new_ncciJan Kiszka1-7/+18
When something went wrong during capifs_new_ncci, the looked up dentry was not properly released. Neither was the allocated inode. Refactor the function to avoid leaks. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16serial: 8250: add serial transmitter fully empty testDick Hollenbeck1-3/+4
When controlling an industrial radio modem it can be necessary to manipulate the handshake lines in order to control the radio modem's transmitter, from userspace. The transmitter should not be turned off before all characters have been transmitted. serial8250_tx_empty() was reporting that all characters were transmitted before they actually were. === Discovered in parallel with more testing and analysis by Kees Schoenmakers as follows: I ran into an NetMos 9835 serial pci board which behaves a little different than the standard. This type of expansion board is very common. "Standard" 8250 compatible devices clear the 'UART_LST_TEMT" bit together with the "UART_LSR_THRE" bit when writing data to the device. The NetMos device does it slightly different I believe that the TEMT bit is coupled to the shift register. The problem is that after writing data to the device and very quickly after that one does call serial8250_tx_empty, it returns the wrong information. My patch makes the test more robust (and solves the problem) and it does not affect the already correct devices. Alan: We may yet need to quirk this but now we know which chips we have a way to do that should we find this breaks some other 8250 clone with dodgy THRE. Signed-off-by: Dick Hollenbeck <dick@softplc.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Kees Schoenmakers <k.schoenmakers@sigmae.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16net neigh: Decouple per interface neighbour table controls from binary sysctlsEric W. Biederman7-13/+8
Stop computing the number of neighbour table settings we have by counting the number of binary sysctls. This behaviour was silly and meant that we could not add another neighbour table setting without also adding another binary sysctl. Don't pass the binary sysctl path for neighour table entries into neigh_sysctl_register. These parameters are no longer used and so are just dead code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16net ipv4: Decouple ipv4 interface parameters from binary sysctl numbersEric W. Biederman3-23/+49
Stop using the binary sysctl enumeartion in sysctl.h as an index into a per interface array. This leads to unnecessary binary sysctl number allocation, and a fragility in data structure and implementation because of unnecessary coupling. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/pcnet32.c: Checkpatch cleaningJoe Perches1-80/+73
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/pcnet32.c: Use (pr|netdev|netif)_<levels> macro helpersJoe Perches1-217/+130
Make the output logging messages a bit more consistent. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/tehuti.c: trivial checkpatch cleanupsJoe Perches1-7/+7
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/tehuti.c: Hoist assigns out of ifsJoe Perches1-22/+27
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/tehuti.c: Use (pr|netdev|netif)_<levels> macro helpersJoe Perches2-59/+59
Make the output logging messages a bit more consistent. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/sky2: Convert to use netif_printk macrosJoe Perches1-38/+27
Some unlikely(netif_msg_<foo>(sky2)) tests are also removed by this change. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/ixgb: Use netif_printk macrosJoe Perches2-49/+51
Convert private DPRINTK macro uses to netif_<level> equivalents Remove #define DPRINTK Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16class: Free the class private data in class_releaseLaurent Pinchart1-0/+2
Fix a memory leak by freeing the memory allocated in __class_register for the class private data. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16sysfs: sysfs_sd_setattr set iattrs unconditionallyEric W. Biederman1-18/+17
There is currently a bug in sysfs_sd_setattr inherited from sysfs_setattr in 2.6.32 where the first time we set the attributes on a sysfs file we allocate backing store but do not set the backing store attributes. Resulting in overly restrictive permissions on sysfs files. The fix is to simply modify the code so that it always executes when we update the sysfs attributes, as we did in 2.6.31 and earlier. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Jean Delvare <khali@linux-fr.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16sparc64: Kill bogus ip_tables.h include.David S. Miller1-1/+0
Fixes the following build failure: CC arch/sparc/kernel/sys_sparc32.o In file included from include/linux/netfilter_ipv4/ip_tables.h:28, from arch/sparc/kernel/sys_sparc32.c:46: include/linux/netfilter/x_tables.h:525: error: expected declaration specifiers or ‘...’ before ‘nf_hookfn’ Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.