aboutsummaryrefslogtreecommitdiffstats
path: root/kernel (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-29smp: Avoid using two cache lines for struct call_single_dataYing Huang3-17/+19
struct call_single_data is used in IPIs to transfer information between CPUs. Its size is bigger than sizeof(unsigned long) and less than cache line size. Currently it is not allocated with any explicit alignment requirements. This makes it possible for allocated call_single_data to cross two cache lines, which results in double the number of the cache lines that need to be transferred among CPUs. This can be fixed by requiring call_single_data to be aligned with the size of call_single_data. Currently the size of call_single_data is the power of 2. If we add new fields to call_single_data, we may need to add padding to make sure the size of new definition is the power of 2 as well. Fortunately, this is enforced by GCC, which will report bad sizes. To set alignment requirements of call_single_data to the size of call_single_data, a struct definition and a typedef is used. To test the effect of the patch, I used the vm-scalability multiple thread swap test case (swap-w-seq-mt). The test will create multiple threads and each thread will eat memory until all RAM and part of swap is used, so that huge number of IPIs are triggered when unmapping memory. In the test, the throughput of memory writing improves ~5% compared with misaligned call_single_data, because of faster IPIs. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Huang, Ying <ying.huang@intel.com> [ Add call_single_data_t and align with size of call_single_data. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/87bmnqd6lz.fsf@yhuang-mobile.sh.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-29locking/lockdep: Untangle xhlock history save/restore from task independencePeter Zijlstra2-46/+42
Where XHLOCK_{SOFT,HARD} are save/restore points in the xhlocks[] to ensure the temporal IRQ events don't interact with task state, the XHLOCK_PROC is a fundament different beast that just happens to share the interface. The purpose of XHLOCK_PROC is to annotate independent execution inside one task. For example workqueues, each work should appear to run in its own 'pristine' 'task'. Remove XHLOCK_PROC in favour of its own interface to avoid confusion. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: david@fromorbit.com Cc: johannes@sipsolutions.net Cc: kernel-team@lge.com Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/20170829085939.ggmb6xiohw67micb@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-25futex: Remove duplicated code and fix undefined behaviourJiri Slaby1-0/+39
There is code duplicated over all architecture's headers for futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr, and comparison of the result. Remove this duplication and leave up to the arches only the needed assembly which is now in arch_futex_atomic_op_inuser. This effectively distributes the Will Deacon's arm64 fix for undefined behaviour reported by UBSAN to all architectures. The fix was done in commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump. And as suggested by Thomas, check for negative oparg too, because it was also reported to cause undefined behaviour report. Note that s390 removed access_ok check in d12a29703 ("s390/uaccess: remove pointless access_ok() checks") as access_ok there returns true. We introduce it back to the helper for the sake of simplicity (it gets optimized away anyway). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile] Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org> Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64] Cc: linux-mips@linux-mips.org Cc: Rich Felker <dalias@libc.org> Cc: linux-ia64@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: peterz@infradead.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: sparclinux@vger.kernel.org Cc: Jonas Bonn <jonas@southpole.se> Cc: linux-s390@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: linux-hexagon@vger.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-snps-arc@lists.infradead.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-xtensa@linux-xtensa.org Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: openrisc@lists.librecores.org Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Stafford Horne <shorne@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Richard Henderson <rth@twiddle.net> Cc: Chris Zankel <chris@zankel.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-parisc@vger.kernel.org Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-alpha@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
2017-08-25locking/lockdep: Fix workqueue crossrelease annotationPeter Zijlstra2-21/+58
The new completion/crossrelease annotations interact unfavourable with the extant flush_work()/flush_workqueue() annotations. The problem is that when a single work class does: wait_for_completion(&C) and complete(&C) in different executions, we'll build dependencies like: lock_map_acquire(W) complete_acquire(C) and lock_map_acquire(W) complete_release(C) which results in the dependency chain: W->C->W, which lockdep thinks spells deadlock, even though there is no deadlock potential since works are ran concurrently. One possibility would be to change the work 'lock' to recursive-read, but that would mean hitting a lockdep limitation on recursive locks. Also, unconditinoally switching to recursive-read here would fail to detect the actual deadlock on single-threaded workqueues, which do have a problem with this. For now, forcefully disregard these locks for crossrelease. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: byungchul.park@lge.com Cc: david@fromorbit.com Cc: johannes@sipsolutions.net Cc: oleg@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-25workqueue/lockdep: 'Fix' flush_work() annotationPeter Zijlstra1-9/+11
The flush_work() annotation as introduced by commit: e159489baa71 ("workqueue: relax lockdep annotation on flush_work()") hits on the lockdep problem with recursive read locks. The situation as described is: Work W1: Work W2: Task: ARR(Q) ARR(Q) flush_workqueue(Q) A(W1) A(W2) A(Q) flush_work(W2) R(Q) A(W2) R(W2) if (special) A(Q) else ARR(Q) R(Q) where: A - acquire, ARR - acquire-read-recursive, R - release. Where under 'special' conditions we want to trigger a lock recursion deadlock, but otherwise allow the flush_work(). The allowing is done by using recursive read locks (ARR), but lockdep is broken for recursive stuff. However, there appears to be no need to acquire the lock if we're not 'special', so if we remove the 'else' clause things become much simpler and no longer need the recursion thing at all. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: byungchul.park@lge.com Cc: david@fromorbit.com Cc: johannes@sipsolutions.net Cc: oleg@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-25Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar16-48/+217
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-24Merge tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds6-16/+38
Pull tracing fixes from Steven Rostedt: "Various bug fixes: - Two small memory leaks in error paths. - A missed return error code on an error path. - A fix to check the tracing ring buffer CPU when it doesn't exist (caused by setting maxcpus on the command line that is less than the actual number of CPUs, and then onlining them manually). - A fix to have the reset of boot tracers called by lateinit_sync() instead of just lateinit(). As some of the tracers register via lateinit(), and if the clear happens before the tracer is registered, it will never start even though it was told to via the kernel command line" * tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix freeing of filter in create_filter() when set_str is false tracing: Fix kmemleak in tracing_map_array_free() ftrace: Check for null ret_stack on profile function graph entry function ring-buffer: Have ring_buffer_alloc_read_page() return error on offline CPU tracing: Missing error code in tracer_alloc_buffers() tracing: Call clear_boot_tracer() at lateinit_sync
2017-08-24tracing: Fix freeing of filter in create_filter() when set_str is falseSteven Rostedt (VMware)1-0/+4
Performing the following task with kmemleak enabled: # cd /sys/kernel/tracing/events/irq/irq_handler_entry/ # echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger # echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8800b9290308 (size 32): comm "bash", pid 1114, jiffies 4294848451 (age 141.139s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0 [<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290 [<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940 [<ffffffff812639c9>] create_filter+0xa9/0x160 [<ffffffff81263bdc>] create_event_filter+0xc/0x10 [<ffffffff812655e5>] set_trigger_filter+0xe5/0x210 [<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490 [<ffffffff812652e2>] event_trigger_write+0x1a2/0x260 [<ffffffff8138cf87>] __vfs_write+0xd7/0x380 [<ffffffff8138f421>] vfs_write+0x101/0x260 [<ffffffff8139187b>] SyS_write+0xab/0x130 [<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe [<ffffffffffffffff>] 0xffffffffffffffff The function create_filter() is passed a 'filterp' pointer that gets allocated, and if "set_str" is true, it is up to the caller to free it, even on error. The problem is that the pointer is not freed by create_filter() when set_str is false. This is a bug, and it is not up to the caller to free the filter on error if it doesn't care about the string. Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com Cc: stable@vger.kernel.org Fixes: 38b78eb85 ("tracing: Factorize filter creation") Reported-by: Chunyu Hu <chuhu@redhat.com> Tested-by: Chunyu Hu <chuhu@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-08-24tracing: Fix kmemleak in tracing_map_array_free()Chunyu Hu1-4/+7
kmemleak reported the below leak when I was doing clear of the hist trigger. With this patch, the kmeamleak is gone. unreferenced object 0xffff94322b63d760 (size 32): comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s) hex dump (first 32 bytes): 00 01 00 00 04 00 00 00 08 00 00 00 ff 00 00 00 ................ 10 00 00 00 00 00 00 00 80 a8 7a f2 31 94 ff ff ..........z.1... backtrace: [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff9e424cba>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffff9e377736>] tracing_map_array_alloc+0x26/0x140 [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50 [<ffffffff9e38b935>] create_hist_data+0x535/0x750 [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420 [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0 [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170 [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0 [<ffffffff9e450b85>] SyS_write+0x55/0xc0 [<ffffffff9e203857>] do_syscall_64+0x67/0x150 [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff9431f27aa880 (size 128): comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s) hex dump (first 32 bytes): 00 00 8c 2a 32 94 ff ff 00 f0 8b 2a 32 94 ff ff ...*2......*2... 00 e0 8b 2a 32 94 ff ff 00 d0 8b 2a 32 94 ff ff ...*2......*2... backtrace: [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff9e425348>] __kmalloc+0xe8/0x220 [<ffffffff9e3777c1>] tracing_map_array_alloc+0xb1/0x140 [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50 [<ffffffff9e38b935>] create_hist_data+0x535/0x750 [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420 [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0 [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170 [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0 [<ffffffff9e450b85>] SyS_write+0x55/0xc0 [<ffffffff9e203857>] do_syscall_64+0x67/0x150 [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/1502705898-27571-1-git-send-email-chuhu@redhat.com Cc: stable@vger.kernel.org Fixes: 08d43a5fa063 ("tracing: Add lock-free tracing_map") Signed-off-by: Chunyu Hu <chuhu@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-08-24ftrace: Check for null ret_stack on profile function graph entry functionSteven Rostedt (VMware)1-0/+4
There's a small race when function graph shutsdown and the calling of the registered function graph entry callback. The callback must not reference the task's ret_stack without first checking that it is not NULL. Note, when a ret_stack is allocated for a task, it stays allocated until the task exits. The problem here, is that function_graph is shutdown, and a new task was created, which doesn't have its ret_stack allocated. But since some of the functions are still being traced, the callbacks can still be called. The normal function_graph code handles this, but starting with commit 8861dd303c ("ftrace: Access ret_stack->subtime only in the function profiler") the profiler code references the ret_stack on function entry, but doesn't check if it is NULL first. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196611 Cc: stable@vger.kernel.org Fixes: 8861dd303c ("ftrace: Access ret_stack->subtime only in the function profiler") Reported-by: lilydjwg@gmail.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-08-21pids: make task_tgid_nr_ns() safeOleg Nesterov1-7/+4
This was reported many times, and this was even mentioned in commit 52ee2dfdd4f5 ("pids: refactor vnr/nr_ns helpers to make them safe") but somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is not safe because task->group_leader points to nowhere after the exiting task passes exit_notify(), rcu_read_lock() can not help. We really need to change __unhash_process() to nullify group_leader, parent, and real_parent, but this needs some cleanups. Until then we can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and fix the problem. Reported-by: Troy Kensinger <tkensinger@google.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-20Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-8/+39
Pull perf fixes from Thomas Gleixner: "Two fixes for the perf subsystem: - Fix an inconsistency of RDPMC mm struct tagging across exec() which causes RDPMC to fault. - Correct the timestamp mechanics across IOC_DISABLE/ENABLE which causes incorrect timestamps and total time calculations" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix time on IOC_ENABLE perf/x86: Fix RDPMC vs. mm_struct tracking
2017-08-20Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-4/+10
Pull irq fixes from Thomas Gleixner: "A pile of smallish changes all over the place: - Add a missing ISB in the GIC V1 driver - Remove an ACPI version check in the GIC V3 ITS driver - Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid spurious wakeups - Remove the artifical limitation of ITS instances to the number of NUMA nodes which prevents utilizing the ITS hardware correctly - Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code - Honour the force affinity argument in the GIC-V3 driver which is required to make perf work correctly - Correctly report allocation failures in GIC-V2/V3 to avoid using half allocated and initialized interrupts. - Fixup checks against nr_cpu_ids in the generic IPI code" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/ipi: Fixup checks against nr_cpu_ids genirq: Restore trigger settings in irq_modify_status() MAINTAINERS: Remove Jason Cooper's irqchip git tree irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES irqchip: brcmstb-l2: Define an irq_pm_shutdown function irqchip/gic: Ensure we have an ISB between ack and ->handle_irq irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA irqchip/gic-v3: Honor forced affinity setting irqchip/gic-v3: Report failures in gic_irq_domain_alloc irqchip/gic-v2: Report failures in gic_irq_domain_alloc irqchip/atmel-aic: Remove root argument from ->fixup() prototype irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup() irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
2017-08-20Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-0/+60
Pull watchdog fix from Thomas Gleixner: "A fix for the hardlockup watchdog to prevent false positives with extreme Turbo-Modes which make the perf/NMI watchdog fire faster than the hrtimer which is used to verify. Slightly larger than the minimal fix, which just would increase the hrtimer frequency, but comes with extra overhead of more watchdog timer interrupts and thread wakeups for all users. With this change we restrict the overhead to the extreme Turbo-Mode systems" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/watchdog: Prevent false positives with turbo modes
2017-08-20genirq/ipi: Fixup checks against nr_cpu_idsAlexey Dobriyan1-2/+2
Valid CPU ids are [0, nr_cpu_ids-1] inclusive. Fixes: 3b8e29a82dd1 ("genirq: Implement ipi_send_mask/single()") Fixes: f9bce791ae2a ("genirq: Add a new function to get IPI reverse mapping") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170819095751.GB27864@avx2
2017-08-18signal: don't remove SIGNAL_UNKILLABLE for traced tasks.Jamie Iles1-1/+5
When forcing a signal, SIGNAL_UNKILLABLE is removed to prevent recursive faults, but this is undesirable when tracing. For example, debugging an init process (whether global or namespace), hitting a breakpoint and SIGTRAP will force SIGTRAP and then remove SIGNAL_UNKILLABLE. Everything continues fine, but then once debugging has finished, the init process is left killable which is unlikely what the user expects, resulting in either an accidentally killed init or an init that stops reaping zombies. Link: http://lkml.kernel.org/r/20170815112806.10728-1-jamie.iles@oracle.com Signed-off-by: Jamie Iles <jamie.iles@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18kmod: fix wait on recursive loopLuis R. Rodriguez1-2/+23
Recursive loops with module loading were previously handled in kmod by restricting the number of modprobe calls to 50 and if that limit was breached request_module() would return an error and a user would see the following on their kernel dmesg: request_module: runaway loop modprobe binfmt-464c Starting init:/sbin/init exists but couldn't execute it (error -8) This issue could happen for instance when a 64-bit kernel boots a 32-bit userspace on some architectures and has no 32-bit binary format hanlders. This is visible, for instance, when a CONFIG_MODULES enabled 64-bit MIPS kernel boots a into o32 root filesystem and the binfmt handler for o32 binaries is not built-in. After commit 6d7964a722af ("kmod: throttle kmod thread limit") we now don't have any visible signs of an error and the kernel just waits for the loop to end somehow. Although this *particular* recursive loop could also be addressed by doing a sanity check on search_binary_handler() and disallowing a modular binfmt to be required for modprobe, a generic solution for any recursive kernel kmod issues is still needed. This should catch these loops. We can investigate each loop and address each one separately as they come in, this however puts a stop gap for them as before. Link: http://lkml.kernel.org/r/20170809234635.13443-3-mcgrof@kernel.org Fixes: 6d7964a722af ("kmod: throttle kmod thread limit") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reported-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgetc.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18kernel/watchdog: Prevent false positives with turbo modesThomas Gleixner2-0/+60
The hardlockup detector on x86 uses a performance counter based on unhalted CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the performance counter period, so the hrtimer should fire 2-3 times before the performance counter NMI fires. The NMI code checks whether the hrtimer fired since the last invocation. If not, it assumess a hard lockup. The calculation of those periods is based on the nominal CPU frequency. Turbo modes increase the CPU clock frequency and therefore shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x nominal frequency) the perf/NMI period is shorter than the hrtimer period which leads to false positives. A simple fix would be to shorten the hrtimer period, but that comes with the side effect of more frequent hrtimer and softlockup thread wakeups, which is not desired. Implement a low pass filter, which checks the perf/NMI period against kernel time. If the perf/NMI fires before 4/5 of the watchdog period has elapsed then the event is ignored and postponed to the next perf/NMI. That solves the problem and avoids the overhead of shorter hrtimer periods and more frequent softlockup thread wakeups. Fixes: 58687acba592 ("lockup_detector: Combine nmi_watchdog and softlockup detector") Reported-and-tested-by: Kan Liang <Kan.liang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: dzickus@redhat.com Cc: prarit@redhat.com Cc: ak@linux.intel.com Cc: babu.moger@oracle.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: acme@redhat.com Cc: stable@vger.kernel.org Cc: atomlin@redhat.com Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos
2017-08-18genirq: Restore trigger settings in irq_modify_status()Marc Zyngier1-2/+8
irq_modify_status starts by clearing the trigger settings from irq_data before applying the new settings, but doesn't restore them, leaving them to IRQ_TYPE_NONE. That's pretty confusing to the potential request_irq() that could follow. Instead, snapshot the settings before clearing them, and restore them if the irq_modify_status() invocation was not changing the trigger. Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ") Reported-and-tested-by: jeffy <jeffy.chen@rock-chips.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170818095345.12378-1-marc.zyngier@arm.com
2017-08-17locking/lockdep: Explicitly initialize wq_barrier::done::mapBoqun Feng1-1/+10
With the new lockdep crossrelease feature, which checks completions usage, a false positive is reported in the workqueue code: > Worker A : acquired of wfc.work -> wait for cpu_hotplug_lock to be released > Task B : acquired of cpu_hotplug_lock -> wait for lock#3 to be released > Task C : acquired of lock#3 -> wait for completion of barr->done > (Task C is in lru_add_drain_all_cpuslocked()) > Worker D : wait for wfc.work to be released -> will complete barr->done Such a dead lock can not happen because Task C's barr->done and Worker D's barr->done can not be the same instance. The reason of this false positive is we initialize all wq_barrier::done at insert_wq_barrier() via init_completion(), which makes them belong to the same lock class, therefore, impossible circles are reported. To fix this, explicitly initialize the lockdep map for wq_barrier::done in insert_wq_barrier(), so that the lock class key of wq_barrier::done is a subkey of the corresponding work_struct, as a result we won't build a dependency between a wq_barrier with a unrelated work, and we can differ wq barriers based on the related works, so the false positive above is avoided. Also define the empty lockdep_init_map_crosslock() for !CROSSRELEASE to make the code simple and away from unnecessary #ifdefs. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170817094622.12915-1-boqun.feng@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-17locking/refcounts, x86/asm: Implement fast refcount overflow protectionKees Cook1-0/+12
This implements refcount_t overflow protection on x86 without a noticeable performance impact, though without the fuller checking of REFCOUNT_FULL. This is done by duplicating the existing atomic_t refcount implementation but with normally a single instruction added to detect if the refcount has gone negative (e.g. wrapped past INT_MAX or below zero). When detected, the handler saturates the refcount_t to INT_MIN / 2. With this overflow protection, the erroneous reference release that would follow a wrap back to zero is blocked from happening, avoiding the class of refcount-overflow use-after-free vulnerabilities entirely. Only the overflow case of refcounting can be perfectly protected, since it can be detected and stopped before the reference is freed and left to be abused by an attacker. There isn't a way to block early decrements, and while REFCOUNT_FULL stops increment-from-zero cases (which would be the state _after_ an early decrement and stops potential double-free conditions), this fast implementation does not, since it would require the more expensive cmpxchg loops. Since the overflow case is much more common (e.g. missing a "put" during an error path), this protection provides real-world protection. For example, the two public refcount overflow use-after-free exploits published in 2016 would have been rendered unexploitable: http://perception-point.io/2016/01/14/analysis-and-exploitation-of-a-linux-kernel-vulnerability-cve-2016-0728/ http://cyseclabs.com/page?n=02012016 This implementation does, however, notice an unchecked decrement to zero (i.e. caller used refcount_dec() instead of refcount_dec_and_test() and it resulted in a zero). Decrements under zero are noticed (since they will have resulted in a negative value), though this only indicates that a use-after-free may have already happened. Such notifications are likely avoidable by an attacker that has already exploited a use-after-free vulnerability, but it's better to have them reported than allow such conditions to remain universally silent. On first overflow detection, the refcount value is reset to INT_MIN / 2 (which serves as a saturation value) and a report and stack trace are produced. When operations detect only negative value results (such as changing an already saturated value), saturation still happens but no notification is performed (since the value was already saturated). On the matter of races, since the entire range beyond INT_MAX but before 0 is negative, every operation at INT_MIN / 2 will trap, leaving no overflow-only race condition. As for performance, this implementation adds a single "js" instruction to the regular execution flow of a copy of the standard atomic_t refcount operations. (The non-"and_test" refcount_dec() function, which is uncommon in regular refcount design patterns, has an additional "jz" instruction to detect reaching exactly zero.) Since this is a forward jump, it is by default the non-predicted path, which will be reinforced by dynamic branch prediction. The result is this protection having virtually no measurable change in performance over standard atomic_t operations. The error path, located in .text.unlikely, saves the refcount location and then uses UD0 to fire a refcount exception handler, which resets the refcount, handles reporting, and returns to regular execution. This keeps the changes to .text size minimal, avoiding return jumps and open-coded calls to the error reporting routine. Example assembly comparison: refcount_inc() before: .text: ffffffff81546149: f0 ff 45 f4 lock incl -0xc(%rbp) refcount_inc() after: .text: ffffffff81546149: f0 ff 45 f4 lock incl -0xc(%rbp) ffffffff8154614d: 0f 88 80 d5 17 00 js ffffffff816c36d3 ... .text.unlikely: ffffffff816c36d3: 48 8d 4d f4 lea -0xc(%rbp),%rcx ffffffff816c36d7: 0f ff (bad) These are the cycle counts comparing a loop of refcount_inc() from 1 to INT_MAX and back down to 0 (via refcount_dec_and_test()), between unprotected refcount_t (atomic_t), fully protected REFCOUNT_FULL (refcount_t-full), and this overflow-protected refcount (refcount_t-fast): 2147483646 refcount_inc()s and 2147483647 refcount_dec_and_test()s: cycles protections atomic_t 82249267387 none refcount_t-fast 82211446892 overflow, untested dec-to-zero refcount_t-full 144814735193 overflow, untested dec-to-zero, inc-from-zero This code is a modified version of the x86 PAX_REFCOUNT atomic_t overflow defense from the last public patch of PaX/grsecurity, based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Thanks to PaX Team for various suggestions for improvement for repurposing this code to be a refcount-only protection. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Hans Liljestrand <ishkamiel@gmail.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Jann Horn <jannh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Serge E. Hallyn <serge@hallyn.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arozansk@redhat.com Cc: axboe@kernel.dk Cc: kernel-hardening@lists.openwall.com Cc: linux-arch <linux-arch@vger.kernel.org> Link: http://lkml.kernel.org/r/20170815161924.GA133115@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-16Merge tag 'audit-pr-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/auditLinus Torvalds1-6/+8
Pull audit fixes from Paul Moore: "Two small fixes to the audit code, both explained well in the respective patch descriptions, but the quick summary is one use-after-free fix, and one silly fanotify notification flag fix" * tag 'audit-pr-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: Receive unmount event audit: Fix use after free in audit_remove_watch_rule()
2017-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-4/+30
Pull networking fixes from David Miller: 1) Fix TCP checksum offload handling in iwlwifi driver, from Emmanuel Grumbach. 2) In ksz DSA tagging code, free SKB if skb_put_padto() fails. From Vivien Didelot. 3) Fix two regressions with bonding on wireless, from Andreas Born. 4) Fix build when busypoll is disabled, from Daniel Borkmann. 5) Fix copy_linear_skb() wrt. SO_PEEK_OFF, from Eric Dumazet. 6) Set SKB cached route properly in inet_rtm_getroute(), from Florian Westphal. 7) Fix PCI-E relaxed ordering handling in cxgb4 driver, from Ding Tianhong. 8) Fix module refcnt leak in ULP code, from Sabrina Dubroca. 9) Fix use of GFP_KERNEL in atomic contexts in AF_KEY code, from Eric Dumazet. 10) Need to purge socket write queue in dccp_destroy_sock(), also from Eric Dumazet. 11) Make bpf_trace_printk() work properly on 32-bit architectures, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) bpf: fix bpf_trace_printk on 32 bit archs PCI: fix oops when try to find Root Port for a PCI device sfc: don't try and read ef10 data on non-ef10 NIC net_sched: remove warning from qdisc_hash_add net_sched/sfq: update hierarchical backlog when drop packet net_sched: reset pointers to tcf blocks in classful qdiscs' destructors ipv4: fix NULL dereference in free_fib_info_rcu() net: Fix a typo in comment about sock flags. ipv6: fix NULL dereference in ip6_route_dev_notify() tcp: fix possible deadlock in TCP stack vs BPF filter dccp: purge write queue in dccp_destroy_sock() udp: fix linear skb reception with PEEK_OFF ipv6: release rt6->rt6i_idev properly during ifdown af_key: do not use GFP_KERNEL in atomic contexts tcp: ulp: avoid module refcnt leak in tcp_set_ulp net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag PCI: Disable Relaxed Ordering Attributes for AMD A1100 PCI: Disable Relaxed Ordering for some Intel processors PCI: Disable PCIe Relaxed Ordering if unsupported ...
2017-08-15bpf: fix bpf_trace_printk on 32 bit archsDaniel Borkmann1-4/+30
James reported that on MIPS32 bpf_trace_printk() is currently broken while MIPS64 works fine: bpf_trace_printk() uses conditional operators to attempt to pass different types to __trace_printk() depending on the format operators. This doesn't work as intended on 32-bit architectures where u32 and long are passed differently to u64, since the result of C conditional operators follows the "usual arithmetic conversions" rules, such that the values passed to __trace_printk() will always be u64 [causing issues later in the va_list handling for vscnprintf()]. For example the samples/bpf/tracex5 test printed lines like below on MIPS32, where the fd and buf have come from the u64 fd argument, and the size from the buf argument: [...] 1180.941542: 0x00000001: write(fd=1, buf= (null), size=6258688) Instead of this: [...] 1625.616026: 0x00000001: write(fd=1, buf=009e4000, size=512) One way to get it working is to expand various combinations of argument types into 8 different combinations for 32 bit and 64 bit kernels. Fix tested by James on MIPS32 and MIPS64 as well that it resolves the issue. Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by: James Hogan <james.hogan@imgtec.com> Tested-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15audit: Receive unmount eventJan Kara1-1/+1
Although audit_watch_handle_event() can handle FS_UNMOUNT event, it is not part of AUDIT_FS_WATCH mask and thus such event never gets to audit_watch_handle_event(). Thus fsnotify marks are deleted by fsnotify subsystem on unmount without audit being notified about that which leads to a strange state of existing audit rules with dead fsnotify marks. Add FS_UNMOUNT to the mask of events to be received so that audit can clean up its state accordingly. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-08-15audit: Fix use after free in audit_remove_watch_rule()Jan Kara1-5/+7
audit_remove_watch_rule() drops watch's reference to parent but then continues to work with it. That is not safe as parent can get freed once we drop our reference. The following is a trivial reproducer: mount -o loop image /mnt touch /mnt/file auditctl -w /mnt/file -p wax umount /mnt auditctl -D <crash in fsnotify_destroy_mark()> Grab our own reference in audit_remove_watch_rule() earlier to make sure mark does not get freed under us. CC: stable@vger.kernel.org Reported-by: Tony Jones <tonyj@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: Tony Jones <tonyj@suse.de> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-08-14locking/lockdep: Fix the rollback and overwrite detection logic in crossreleaseByungchul Park1-6/+6
As Boqun Feng pointed out, current->hist_id should be aligned with the latest valid xhlock->hist_id so that hist_id_save[] storing current->hist_id can be comparable with xhlock->hist_id. Fix it. Additionally, the condition for overwrite-detection should be the opposite. Fix the code and the comments as well. <- direction to visit hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh (h: history) ^^ ^ || start from here |previous entry current entry Reported-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: linux-mm@kvack.org Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502694052-16085-3-git-send-email-byungchul.park@lge.com [ Improve the comments some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-14locking/lockdep: Add a comment about crossrelease_hist_end() in lockdep_sys_exit()Byungchul Park1-0/+4
In lockdep_sys_exit(), crossrelease_hist_end() is called unconditionally even when getting here without having started e.g. just after forking. But it's no problem since it would roll back to an invalid entry anyway. Add a comment to explain this. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: linux-mm@kvack.org Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502694052-16085-2-git-send-email-byungchul.park@lge.com [ Improved the description and the comments. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-11Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar2-2/+2
Conflicts: include/linux/mm_types.h mm/huge_memory.c I removed the smp_mb__before_spinlock() like the following commit does: 8b1b436dd1cc ("mm, locking: Rework {set,clear,mm}_tlb_flush_pending()") and fixed up the affected commits. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10mm: migrate: prevent racy access to tlb_flush_pendingNadav Amit1-1/+1
Patch series "fixes of TLB batching races", v6. It turns out that Linux TLB batching mechanism suffers from various races. Races that are caused due to batching during reclamation were recently handled by Mel and this patch-set deals with others. The more fundamental issue is that concurrent updates of the page-tables allow for TLB flushes to be batched on one core, while another core changes the page-tables. This other core may assume a PTE change does not require a flush based on the updated PTE value, while it is unaware that TLB flushes are still pending. This behavior affects KSM (which may result in memory corruption) and MADV_FREE and MADV_DONTNEED (which may result in incorrect behavior). A proof-of-concept can easily produce the wrong behavior of MADV_DONTNEED. Memory corruption in KSM is harder to produce in practice, but was observed by hacking the kernel and adding a delay before flushing and replacing the KSM page. Finally, there is also one memory barrier missing, which may affect architectures with weak memory model. This patch (of 7): Setting and clearing mm->tlb_flush_pending can be performed by multiple threads, since mmap_sem may only be acquired for read in task_numa_work(). If this happens, tlb_flush_pending might be cleared while one of the threads still changes PTEs and batches TLB flushes. This can lead to the same race between migration and change_protection_range() that led to the introduction of tlb_flush_pending. The result of this race was data corruption, which means that this patch also addresses a theoretically possible data corruption. An actual data corruption was not observed, yet the race was was confirmed by adding assertion to check tlb_flush_pending is not set by two threads, adding artificial latency in change_protection_range() and using sysctl to reduce kernel.numa_balancing_scan_delay_ms. Link: http://lkml.kernel.org/r/20170802000818.4760-2-namit@vmware.com Fixes: 20841405940e ("mm: fix TLB flush race between migration, and change_protection_range") Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10mm: fix global NR_SLAB_.*CLAIMABLE counter readsJohannes Weiner1-1/+1
As Tetsuo points out: "Commit 385386cff4c6 ("mm: vmstat: move slab statistics from zone to node counters") broke "Slab:" field of /proc/meminfo . It shows nearly 0kB" In addition to /proc/meminfo, this problem also affects the slab counters OOM/allocation failure info dumps, can cause early -ENOMEM from overcommit protection, and miscalculate image size requirements during suspend-to-disk. This is because the patch in question switched the slab counters from the zone level to the node level, but forgot to update the global accessor functions to read the aggregate node data instead of the aggregate zone data. Use global_node_page_state() to access the global slab counters. Fixes: 385386cff4c6 ("mm: vmstat: move slab statistics from zone to node counters") Link: http://lkml.kernel.org/r/20170801134256.5400-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10locking/lockdep: Apply crossrelease to completionsByungchul Park1-0/+11
Although wait_for_completion() and its family can cause deadlock, the lock correctness validator could not be applied to them until now, because things like complete() are usually called in a different context from the waiting context, which violates lockdep's assumption. Thanks to CONFIG_LOCKDEP_CROSSRELEASE, we can now apply the lockdep detector to those completion operations. Applied it. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502089981-21272-10-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Make print_circular_bug() aware of crossreleaseByungchul Park1-20/+47
print_circular_bug() reporting circular bug assumes that target hlock is owned by the current. However, in crossrelease, target hlock can be owned by other than the current. So the report format needs to be changed to reflect the change. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502089981-21272-9-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Handle non(or multi)-acquisition of a crosslockByungchul Park1-26/+56
No acquisition might be in progress on commit of a crosslock. Completion operations enabling crossrelease are the case like: CONTEXT X CONTEXT Y --------- --------- trigger completion context complete AX commit AX wait_for_complete AX acquire AX wait where AX is a crosslock. When no acquisition is in progress, we should not perform commit because the lock does not exist, which might cause incorrect memory access. So we have to track the number of acquisitions of a crosslock to handle it. Moreover, in case that more than one acquisition of a crosslock are overlapped like: CONTEXT W CONTEXT X CONTEXT Y CONTEXT Z --------- --------- --------- --------- acquire AX (gen_id: 1) acquire A acquire AX (gen_id: 10) acquire B commit AX acquire C commit AX where A, B and C are typical locks and AX is a crosslock. Current crossrelease code performs commits in Y and Z with gen_id = 10. However, we can use gen_id = 1 to do it, since not only 'acquire AX in X' but 'acquire AX in W' also depends on each acquisition in Y and Z until their commits. So make it use gen_id = 1 instead of 10 on their commits, which adds an additional dependency 'AX -> A' in the example above. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502089981-21272-8-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Detect and handle hist_lock ring buffer overwriteByungchul Park1-5/+47
The ring buffer can be overwritten by hardirq/softirq/work contexts. That cases must be considered on rollback or commit. For example, |<------ hist_lock ring buffer size ----->| ppppppppppppiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii wrapped > iiiiiiiiiiiiiiiiiiiiiii.................... where 'p' represents an acquisition in process context, 'i' represents an acquisition in irq context. On irq exit, crossrelease tries to rollback idx to original position, but it should not because the entry already has been invalid by overwriting 'i'. Avoid rollback or commit for entries overwritten. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502089981-21272-7-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Implement the 'crossrelease' featureByungchul Park4-23/+492
Lockdep is a runtime locking correctness validator that detects and reports a deadlock or its possibility by checking dependencies between locks. It's useful since it does not report just an actual deadlock but also the possibility of a deadlock that has not actually happened yet. That enables problems to be fixed before they affect real systems. However, this facility is only applicable to typical locks, such as spinlocks and mutexes, which are normally released within the context in which they were acquired. However, synchronization primitives like page locks or completions, which are allowed to be released in any context, also create dependencies and can cause a deadlock. So lockdep should track these locks to do a better job. The 'crossrelease' implementation makes these primitives also be tracked. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502089981-21272-6-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Make check_prev_add() able to handle external stack_traceByungchul Park1-21/+19
Currently, a space for stack_trace is pinned in check_prev_add(), that makes us not able to use external stack_trace. The simplest way to achieve it is to pass an external stack_trace as an argument. A more suitable solution is to pass a callback additionally along with a stack_trace so that callers can decide the way to save or whether to save. Actually crossrelease needs to do other than saving a stack_trace. So pass a stack_trace and callback to handle it, to check_prev_add(). Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502089981-21272-5-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Change the meaning of check_prev_add()'s return valueByungchul Park1-3/+4
Firstly, return 1 instead of 2 when 'prev -> next' dependency already exists. Since the value 2 is not referenced anywhere, just return 1 indicating success in this case. Secondly, return 2 instead of 1 when successfully added a lock_list entry with saving stack_trace. With that, a caller can decide whether to avoid redundant save_trace() on the caller site. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502089981-21272-4-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Add a function building a chain between two classesByungchul Park1-0/+70
Crossrelease needs to build a chain between two classes regardless of their contexts. However, add_chain_cache() cannot be used for that purpose since it assumes that it's called in the acquisition context of the hlock. So this patch introduces a new function doing it. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502089981-21272-3-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Refactor lookup_chain_cache()Byungchul Park1-48/+93
Currently, lookup_chain_cache() provides both 'lookup' and 'add' functionalities in a function. However, each is useful. So this patch makes lookup_chain_cache() only do 'lookup' functionality and makes add_chain_cahce() only do 'add' functionality. And it's more readable than before. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/1502089981-21272-2-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Avoid creating redundant linksPeter Zijlstra3-0/+33
Two boots + a make defconfig, the first didn't have the redundant bit in, the second did: lock-classes: 1168 1169 [max: 8191] direct dependencies: 7688 5812 [max: 32768] indirect dependencies: 25492 25937 all direct dependencies: 220113 217512 dependency chains: 9005 9008 [max: 65536] dependency chain hlocks: 34450 34366 [max: 327680] in-hardirq chains: 55 51 in-softirq chains: 371 378 in-process chains: 8579 8579 stack-trace entries: 108073 88474 [max: 524288] combined max dependencies: 178738560 169094640 max locking depth: 15 15 max bfs queue depth: 320 329 cyclic checks: 9123 9190 redundant checks: 5046 redundant links: 1828 find-mask forwards checks: 2564 2599 find-mask backwards checks: 39521 39789 So it saves nearly 2k links and a fair chunk of stack-trace entries, but as expected, makes no real difference on the indirect dependencies. At the same time, you see the max BFS depth increase, which is also expected, although it could easily be boot variance -- these numbers are not entirely stable between boots. The down side is that the cycles in the graph become larger and thus the reports harder to read. XXX: do we want this as a CONFIG variable, implied by LOCKDEP_SMALL? Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nikolay Borisov <nborisov@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: iamjoonsoo.kim@lge.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Link: http://lkml.kernel.org/r/20170303091338.GH6536@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/lockdep: Rework FS_RECLAIM annotationPeter Zijlstra2-95/+1
A while ago someone, and I cannot find the email just now, asked if we could not implement the RECLAIM_FS inversion stuff with a 'fake' lock like we use for other things like workqueues etc. I think this should be possible which allows reducing the 'irq' states and will reduce the amount of __bfs() lookups we do. Removing the 1 IRQ state results in 4 less __bfs() walks per dependency, improving lockdep performance. And by moving this annotation out of the lockdep code it becomes easier for the mm people to extend. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nikolay Borisov <nborisov@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: iamjoonsoo.kim@lge.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking: Introduce smp_mb__after_spinlock()Peter Zijlstra1-2/+2
Since its inception, our understanding of ACQUIRE, esp. as applied to spinlocks, has changed somewhat. Also, I wonder if, with a simple change, we cannot make it provide more. The problem with the comment is that the STORE done by spin_lock isn't itself ordered by the ACQUIRE, and therefore a later LOAD can pass over it and cross with any prior STORE, rendering the default WMB insufficient (pointed out by Alan). Now, this is only really a problem on PowerPC and ARM64, both of which already defined smp_mb__before_spinlock() as a smp_mb(). At the same time, we can get a much stronger construct if we place that same barrier _inside_ the spin_lock(). In that case we upgrade the RCpc spinlock to an RCsc. That would make all schedule() calls fully transitive against one another. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10jump_label: Provide hotplug context variantsMarc Zyngier1-4/+18
As using the normal static key API under the hotplug lock is pretty much impossible, let's provide a variant of some of them that require the hotplug lock to have already been taken. These function are only meant to be used in CPU hotplug callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170801080257.5056-4-marc.zyngier@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10jump_label: Split out code under the hotplug lockMarc Zyngier1-9/+19
In order to later introduce an "already locked" version of some of the static key funcions, let's split the code into the core stuff (the *_cpuslocked functions) and the usual helpers, which now take/release the hotplug lock and call into the _cpuslocked versions. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170801080257.5056-3-marc.zyngier@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10jump_label: Move CPU hotplug lockingMarc Zyngier1-2/+4
As we're about to rework the locking, let's move the taking and release of the CPU hotplug lock to locations that will make its reworking completely obvious. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170801080257.5056-2-marc.zyngier@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10jump_label: Add RELEASE barrier after text changesPeter Zijlstra1-2/+9
In the unlikely case text modification does not fully order things, add some extra ordering of our own to ensure we only enabled the fast path after all text is visible. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10cpuset: Make nr_cpusets privatePaolo Bonzini1-0/+7
Any use of key->enabled (that is static_key_enabled and static_key_count) outside jump_label_lock should handle its own serialization. In the case of cpusets_enabled_key, the key is always incremented/decremented under cpuset_mutex, and hence the same rule applies to nr_cpusets. The rule *is* respected currently, but the mutex is static so nr_cpusets should be static too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Zefan Li <lizefan@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1501601046-35683-4-git-send-email-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10jump_label: Fix concurrent static_key_enable/disable()Paolo Bonzini1-22/+37
static_key_enable/disable are trying to cap the static key count to 0/1. However, their use of key->enabled is outside jump_label_lock so they do not really ensure that. Rewrite them to do a quick check for an already enabled (respectively, already disabled), and then recheck under the jump label lock. Unlike static_key_slow_inc/dec, a failed check under the jump label lock does not modify key->enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1501601046-35683-2-git-send-email-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10locking/rwsem-xadd: Add killable versions of rwsem_down_read_failed()Kirill Tkhai1-3/+30
Rename rwsem_down_read_failed() in __rwsem_down_read_failed_common() and teach it to abort waiting in case of pending signals and killable state argument passed. Note, that we shouldn't wake anybody up in EINTR path, as: We check for (waiter.task) under spinlock before we go to out_nolock path. Current task wasn't able to be woken up, so there are a writer, owning the sem, or a writer, which is the first waiter. In the both cases we shouldn't wake anybody. If there is a writer, owning the sem, and we were the only waiter, remove RWSEM_WAITING_BIAS, as there are no waiters anymore. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: avagin@virtuozzo.com Cc: davem@davemloft.net Cc: fenghua.yu@intel.com Cc: gorcunov@virtuozzo.com Cc: heiko.carstens@de.ibm.com Cc: hpa@zytor.com Cc: ink@jurassic.park.msu.ru Cc: mattst88@gmail.com Cc: rth@twiddle.net Cc: schwidefsky@de.ibm.com Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/149789534632.9059.2901382369609922565.stgit@localhost.localdomain Signed-off-by: Ingo Molnar <mingo@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.