| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer() so we can remove some redundant code.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add EC host command support through rpmsg.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
As part of Chrome OS's FAFT (Fully Automated Firmware Testing)
tests, we need to ensure that the H1 chip is properly setting
some GPIO lines. The h1_gpio attribute exposes the state
of the lines:
- ENTRY_TO_FACT_MODE in BIT(0)
- SPI_CHROME_SEL in BIT(1)
There are two reasons that I am exposing this in debugfs,
and not as a GPIO:
1. This is only useful for testing, so end users shouldn't ever
care about this. In fact, if it passes the tests, then the value of
h1_gpio will always be 2, so it would be really uninteresting for users.
2. This GPIO is not connected to, controlled by, or really even related
to the AP. The GPIO runs between the EC and the H1 security chip.
Changes in v4:
- Use "0x02x\n" instead of "02x\n" for format string
- Use DEFINE_DEBUGFS_ATTRIBUTE()
- Add documentation
Changes in v3:
- Fix documentation to correspond with formatting change in v2.
Changes in v2:
- Zero out the unused fields in the request.
- Format result as "%02x\n" instead of as a decimal.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
The current API for the wilco EC mailbox interface is bad.
It assumes that most messages sent to the EC follow a similar structure,
with a command byte in MBOX[0], followed by a junk byte, followed by
actual data. This doesn't happen in several cases, such as setting the
RTC time, using the raw debugfs interface, and reading or writing
properties such as the Peak Shift policy (this last to be submitted soon).
Similarly for the response message from the EC, the current interface
assumes that the first byte of data is always 0, and the second byte
is unused. However, in both setting and getting the RTC time, in the
debugfs interface, and for reading and writing properties, this isn't
true.
The current way to resolve this is to use WILCO_EC_FLAG_RAW* flags to
specify when and when not to skip these initial bytes in the sent and
received message. They are confusing and used so much that they are
normal, and not exceptions. In addition, the first byte of
response in the debugfs interface is still always skipped, which is
weird, since this raw interface should be giving the entire result.
Additionally, sent messages assume the first byte is a command, and so
struct wilco_ec_message contains the "command" field. In setting or
getting properties however, the first byte is not a command, and so this
field has to be filled with a byte that isn't actually a command. This
is again inconsistent.
wilco_ec_message contains a result field as well, copied from
wilco_ec_response->result. The message result field should be removed:
if the message fails, the cause is already logged, and the callers are
alerted. They will never care about the actual state of the result flag.
These flags and different cases make the wilco_ec_transfer() function,
used in wilco_ec_mailbox(), really gross, dealing with a bunch of
different cases. It's difficult to figure out what it is doing.
Finally, making these assumptions about the structure of a message make
it so that the messages do not correspond well with the specification
for the EC's mailbox interface. For instance, this interface
specification may say that MBOX[9] in the received message contains
some information, but the calling code needs to remember that the first
byte of response is always skipped, and because it didn't set the
RESPONSE_RAW flag, the next byte is also skipped, so this information
is actually contained within wilco_ec_message->response_data[7]. This
makes it difficult to maintain this code in the future.
To fix these problems this patch standardizes the mailbox interface by:
- Removing the WILCO_EC_FLAG_RAW* flags
- Removing the command and reserved_raw bytes from wilco_ec_request
- Removing the mbox0 byte from wilco_ec_response
- Simplifying wilco_ec_transfer() because of these changes
- Gives the callers of wilco_ec_mailbox() the responsibility of exactly
and consistently defining the structure of the mailbox request and
response
- Removing command and result from wilco_ec_message.
This results in the reduction of total code, and makes it much more
maintainable and understandable.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
As new transfer mechanisms are added to the EC codebase, they may
not support v2 of the EC protocol.
If the v3 initial handshake transfer fails, the kernel will try
and call cmd_xfer as a fallback. If v2 is not supported, cmd_xfer
will be NULL, and the code will end up causing a kernel panic.
Add a check for NULL before calling the transfer function, along
with a helpful comment explaining how one might end up in this
situation.
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
The CrOS USB PD logging feature is logically separate functionality of
the charge manager, hence has its own driver. The driver logs the event
data for the USB PD charger available in some ChromeOS Embedded
Controllers.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
[remove macro to APPEND_STRING and minor cleanups]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
The software running on the Chrome OS Embedded Controller (cros_ec)
handles SPI transfers in a bit of a wonky way. Specifically if the EC
sees too long of a delay in a SPI transfer it will give up and the
transfer will be counted as failed. Unfortunately the timeout is
fairly short, though the actual number may be different for different
EC codebases.
We can end up tripping the timeout pretty easily if we happen to
preempt the task running the SPI transfer and don't get back to it for
a little while.
Historically this hasn't been a _huge_ deal because:
1. On old devices Chrome OS used to run PREEMPT_VOLUNTARY. That meant
we were pretty unlikely to take a big break from the transfer.
2. On recent devices we had faster / more processors.
3. Recent devices didn't use "cros-ec-spi-pre-delay". Using that
delay makes us more likely to trip this use case.
4. For whatever reasons (I didn't dig) old kernels seem to be less
likely to trip this.
5. For the most part it's kinda OK if a few transfers to the EC fail.
Mostly we're just polling the battery or doing some other task
where we'll try again.
Even with the above things, this issue has reared its ugly head
periodically. We could solve this in a nice way by adding reliable
retries to the EC protocol [1] or by re-designing the code in the EC
codebase to allow it to wait longer, but that code doesn't ever seem
to get changed. ...and even if it did, it wouldn't help old devices.
It's now time to finally take a crack at making this a little better.
This patch isn't guaranteed to make every cros_ec SPI transfer
perfect, but it should improve things by a few orders of magnitude.
Specifically you can try this on a rk3288-veyron Chromebook (which is
slower and also _does_ need "cros-ec-spi-pre-delay"):
md5sum /dev/zero &
md5sum /dev/zero &
md5sum /dev/zero &
md5sum /dev/zero &
while true; do
cat /sys/class/power_supply/sbs-20-000b/charge_now > /dev/null;
done
...before this patch you'll see boatloads of errors. After this patch I
don't see any in the testing I did.
The way this patch works is by effectively boosting the priority of
the cros_ec transfers. As far as I know there is no simple way to
just boost the priority of the current process temporarily so the way
we accomplish this is by queuing the work on the system_highpri_wq.
NOTE: this patch relies on the fact that the SPI framework attempts to
push the messages out on the calling context (which is the one that is
boosted to high priority). As I understand from earlier (long ago)
discussions with Mark Brown this should be a fine assumption. Even if
it isn't true sometimes this patch will still not make things worse.
[1] https://crbug.com/678675
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
If the debugfs interface is enabled, every time a CrOS device is
instantiated a warning like this can appear for every probed device.
"device does not support reading the console log"
The warning message adds nothing, rather it is source of confusion as
this is expected on some cases. For example, on Samus, that has a
cros-ec and a cros-pd instance the message appears twice, and I suspect
this will happen also on those devices that has a non-standard EC.
If the command is not supported just return silently and don't print the
warning, otherwise the code will already print an error.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
|
|
|
|
Since board support for the CLPS711X platform was removed,
remove the board support from the clps711x-timer driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru
|
|
The ext4 fstrim implementation uses the block bitmaps to find free space
that can be discarded. If we haven't replayed the journal, the bitmaps
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we
may probably forget to release the buffer some day. This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.
- Create and mount an empty ext4 filesystem without extent and quota
features,
- quotacheck and enable the user & group quota,
- Create some files and write some data to them, and then punch hole
to some files of them, it may trigger the buffer leak problem
mentioned above.
- Disable quota and run quotacheck again, it will create two new
aquota files and write the checked quota information to them, which
probably may reuse the freed indirect block(the buffer and page
cache was not freed) as data block.
- Enable quota again, it will invoke
vfs_load_quota_inode()->invalidate_bdev() to try to clean unused
buffers and pagecache. Unfortunately, because of the buffer of quota
data block is still referenced, quota code cannot read the up to date
quota info from the device and lead to quota information corruption.
This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.
This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
With -Wimplicit-fallthrough added to CFLAGS:
kernel/irq/manage.c: In function ‘irq_do_set_affinity’:
kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
cpumask_copy(desc->irq_common_data.affinity, mask);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/irq/manage.c:199:2: note: here
case IRQ_SET_MASK_OK_NOCOPY:
^~~~
Annotate it.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor
|
|
For all riscv architectures (RV32, RV64 and RV128), the clocksource
is a 64 bit incrementing counter.
Fix the clock source mask accordingly.
Tested on both 64bit and 32 bit virt machine in QEMU.
Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Anup Patel <Anup.Patel@wdc.com>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com
|
|
On machines where the GART aperture is mapped over physical RAM,
/proc/kcore contains the GART aperture range. Accessing the GART range via
/proc/kcore results in a kernel crash.
vmcore used to have the same issue, until it was fixed with commit
2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging
existing hook infrastructure in vmcore to let /proc/vmcore return zeroes
when attempting to read the aperture region, and so it won't read from the
actual memory.
Apply the same workaround for kcore. First implement the same hook
infrastructure for kcore, then reuse the hook functions introduced in the
previous vmcore fix. Just with some minor adjustment, rename some functions
for more general usage, and simplify the hook infrastructure a bit as there
is no module usage yet.
Suggested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Dave Young <dyoung@redhat.com>
Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com
|
|
To 2.19
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Workaround problem with Samba responses to SMB3.1.1
null user (guest) mounts. The server doesn't set the
expected flag in the session setup response so we have
to do a similar check to what is done in smb3_validate_negotiate
where we also check if the user is a null user (but not sec=krb5
since username might not be passed in on mount for Kerberos case).
Note that the commit below tightened the conditions and forced signing
for the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
cases where there is no user (even if server forgets to set the flag
in the response) since we don't have anything useful to sign with.
This is especially important now that the more secure SMB3.1.1 protocol
is in the default dialect list.
An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed
the guest mounts to Windows.
Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This patch fixes the following KASAN report:
[ 779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180
[ 779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812
[ 779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62
[ 779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
[ 779.044761] Call Trace:
[ 779.044769] dump_stack+0x5b/0x90
[ 779.044775] ? string+0xab/0x180
[ 779.044781] print_address_description+0x6c/0x23c
[ 779.044787] ? string+0xab/0x180
[ 779.044792] ? string+0xab/0x180
[ 779.044797] kasan_report.cold.3+0x1a/0x32
[ 779.044803] ? string+0xab/0x180
[ 779.044809] string+0xab/0x180
[ 779.044816] ? widen_string+0x160/0x160
[ 779.044822] ? vsnprintf+0x5bf/0x7f0
[ 779.044829] vsnprintf+0x4e7/0x7f0
[ 779.044836] ? pointer+0x4a0/0x4a0
[ 779.044841] ? seq_buf_vprintf+0x79/0xc0
[ 779.044848] seq_buf_vprintf+0x62/0xc0
[ 779.044855] trace_seq_printf+0x113/0x210
[ 779.044861] ? trace_seq_puts+0x110/0x110
[ 779.044867] ? trace_raw_output_prep+0xd8/0x110
[ 779.044876] trace_raw_output_smb3_tcon_class+0x9f/0xc0
[ 779.044882] print_trace_line+0x377/0x890
[ 779.044888] ? tracing_buffers_read+0x300/0x300
[ 779.044893] ? ring_buffer_read+0x58/0x70
[ 779.044899] s_show+0x6e/0x140
[ 779.044906] seq_read+0x505/0x6a0
[ 779.044913] vfs_read+0xaf/0x1b0
[ 779.044919] ksys_read+0xa1/0x130
[ 779.044925] ? kernel_write+0xa0/0xa0
[ 779.044931] ? __do_page_fault+0x3d5/0x620
[ 779.044938] do_syscall_64+0x63/0x150
[ 779.044944] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 779.044949] RIP: 0033:0x7f62c2c2db31
[ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02
02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0
0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48
89
[ 779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31
[ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[ 779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003
[ 779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710
[ 779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000
[ 779.044981] Allocated by task 1257:
[ 779.044987] __kasan_kmalloc.constprop.5+0xc1/0xd0
[ 779.044992] kmem_cache_alloc+0xad/0x1a0
[ 779.044997] getname_flags+0x6c/0x2a0
[ 779.045003] user_path_at_empty+0x1d/0x40
[ 779.045008] do_faccessat+0x12a/0x330
[ 779.045012] do_syscall_64+0x63/0x150
[ 779.045017] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 779.045019] Freed by task 1257:
[ 779.045023] __kasan_slab_free+0x12e/0x180
[ 779.045029] kmem_cache_free+0x85/0x1b0
[ 779.045034] filename_lookup.part.70+0x176/0x250
[ 779.045039] do_faccessat+0x12a/0x330
[ 779.045043] do_syscall_64+0x63/0x150
[ 779.045048] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 779.045052] The buggy address belongs to the object at ffff88814f326600
which belongs to the cache names_cache of size 4096
[ 779.045057] The buggy address is located 872 bytes to the right of
4096-byte region [ffff88814f326600, ffff88814f327600)
[ 779.045058] The buggy address belongs to the page:
[ 779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0
[ 779.045067] flags: 0x200000000010200(slab|head)
[ 779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40
[ 779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[ 779.045083] page dumped because: kasan: bad access detected
[ 779.045085] Memory state around the buggy address:
[ 779.045089] ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045093] ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045099] ^
[ 779.045103] ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045107] ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045109] ==================================================================
[ 779.045110] Disabling lock debugging due to kernel taint
Correctly assign tree name str for smb3_tcon event.
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix Guest/Anonymous sessions so that they work with SMB 3.11.
The commit noted below tightened the conditions and forced signing for
the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
Guest/Anonumous sessions.
Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It was mapped to EIO which can be confusing when user space
queries for an object GUID for an object for which the server
file system doesn't support (or hasn't saved one).
As Amir Goldstein suggested this is similar to ENOATTR
(equivalently ENODATA in Linux errno definitions) so
changing NT STATUS code mapping for OBJECTID_NOT_FOUND
to ENODATA.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Amir Goldstein <amir73il@gmail.com>
|
|
dedupe_file_range operations is combiled into remap_file_range.
But it's always skipped for dedupe operations in function
cifs_remap_file_range.
Example to test:
Before this patch:
# dd if=/dev/zero of=cifs/file bs=1M count=1
# xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
XFS_IOC_FILE_EXTENT_SAME: Invalid argument
After this patch:
# dd if=/dev/zero of=cifs/file bs=1M count=1
# xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
XFS_IOC_FILE_EXTENT_SAME: Operation not supported
Influence for xfstests:
generic/091
generic/112
generic/127
generic/263
These tests report this error "do_copy_range:: Invalid
argument" instead of "FIDEDUPERANGE: Invalid argument".
Because there are still two bugs cause these test failed.
https://bugzilla.kernel.org/show_bug.cgi?id=202935
https://bugzilla.kernel.org/show_bug.cgi?id=202785
Signed-off-by: Xiaoli Feng <fengxiaoli0714@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When sending a rdata, transport may return -EAGAIN. In this case
we should re-obtain credits because the session may have been
reconnected.
Change in v2: adjust_credits before re-sending
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
When sending a wdata, transport may return -EAGAIN. In this case
we should re-obtain credits because the session may have been
reconnected.
Change in v2: adjust_credits before re-sending
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Fix sparse warning:
drivers/clocksource/mips-gic-timer.c:70:18: warning:
symbol 'gic_compare_irqaction' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190322144359.19516-1-yuehaibing@huawei.com
|
|
Fix sparse warning:
drivers/clocksource/timer-ti-dm.c:589:5: warning:
symbol 'omap_dm_timer_set_load_start' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190322144302.6704-1-yuehaibing@huawei.com
|
|
Fix sparse warnings:
drivers/clocksource/tcb_clksrc.c:74:6: warning:
symbol 'tc_clksrc_suspend' was not declared. Should it be static?
drivers/clocksource/tcb_clksrc.c:89:6: warning:
symbol 'tc_clksrc_resume' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <nicolas.ferre@microchip.com>
Cc: <daniel.lezcano@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190322143940.12396-1-yuehaibing@huawei.com
|
|
Fix sparse warning:
drivers/clocksource/clps711x-timer.c:96:13: warning:
symbol 'clps711x_clksrc_init' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Cc: <shc_work@mail.ru>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190322143708.12716-1-yuehaibing@huawei.com
|
|
"sbitmap_batch_clear" should be "sbitmap_deferred_clear"
Acked-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When building with -Wsometimes-uninitialized, Clang warns:
arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
The default cannot be reached because arch_build_bp_info() initializes
hw->len to one of the specified cases. Nevertheless the warning is valid
and returning -EINVAL makes sure that this cannot be broken by future
modifications.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/392
Link: https://lkml.kernel.org/r/20190307212756.4648-1-natechancellor@gmail.com
|
|
sparse complains:
CHECK kernel/watchdog.c
kernel/watchdog.c:45:19: warning: symbol 'nmi_watchdog_available'
was not declared. Should it be static?
kernel/watchdog.c:47:16: warning: symbol 'watchdog_allowed_mask'
was not declared. Should it be static?
They're not referenced by name from anyplace else, make them static.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/7855.1552383228@turing-police
|
|
sparse complains:
CHECK kernel/time/jiffies.c
kernel/time/jiffies.c:92:20: warning: symbol 'refined_jiffies' was not
declared. Should it be static?
Its only used in file scope. Make it static.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/32342.1552379915@turing-police
|
|
Building with 'make W=1' complains:
CC kernel/irq/devres.o
kernel/irq/devres.c:104: warning: Excess function parameter 'thread_fn'
description in 'devm_request_any_context_irq'
Remove it.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/31207.1552378676@turing-police
|
|
With 'make C=2 W=1', sparse and gcc both complain:
CHECK arch/x86/mm/pti.c
arch/x86/mm/pti.c:84:3: warning: symbol 'pti_mode' was not declared. Should it be static?
arch/x86/mm/pti.c:605:6: warning: symbol 'pti_set_kernel_image_nonglobal' was not declared. Should it be static?
CC arch/x86/mm/pti.o
arch/x86/mm/pti.c:605:6: warning: no previous prototype for 'pti_set_kernel_image_nonglobal' [-Wmissing-prototypes]
605 | void pti_set_kernel_image_nonglobal(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pti_set_kernel_image_nonglobal() is only used locally. 'pti_mode' exists in
drivers/hwtracing/intel_th/pti.c as well, but it's a completely unrelated
local (static) symbol.
Make both static.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/27680.1552376873@turing-police
|
|
The futex code requires that the user space addresses of futexes are 32bit
aligned. sys_futex() checks this in futex_get_keys() but the robust list
code has no alignment check in place.
As a consequence the kernel crashes on architectures with strict alignment
requirements in handle_futex_death() when trying to cmpxchg() on an
unaligned futex address which was retrieved from the robust list.
[ tglx: Rewrote changelog, proper sizeof() based alignement check and add
comment ]
Fixes: 0771dfefc9e5 ("[PATCH] lightweight robust futexes: core")
Signed-off-by: Chen Jie <chenjie6@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <dvhart@infradead.org>
Cc: <peterz@infradead.org>
Cc: <zengweilin@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1552621478-119787-1-git-send-email-chenjie6@huawei.com
|
|
The driver sets a default domain id (FLPT_DEFAULT_DID) in the
first level only pasid entry, but saves a different domain id
in @sdev->did. The value saved in @sdev->did will be used to
invalidate the translation caches. Hence, the driver might
result in invalidating the caches with a wrong domain id.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The spec states in 10.4.16 that the Protected Memory Enable
Register should be treated as read-only for implementations
not supporting protected memory regions (PLMR and PHMR fields
reported as Clear in the Capability register).
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: mark gross <mgross@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: f8bab73515ca5 ("intel-iommu: PMEN support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If a 32 bit allocation request is too big to possibly succeed, it
early exits with a failure and then should never update max32_alloc_
size. This patch fixes current code, now the size is only updated if
the slow path failed while walking the tree. Without the fix the
allocation may enter the slow path again even if there was a failure
before of a request with the same or a smaller size.
Cc: <stable@vger.kernel.org> # 4.20+
Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Empty chunk do not have a bo associated with them so no need to pin/unpin
on suspend/resume.
This fix suspend/resume on 5.1rc1 when NOUVEAU_SVM is enabled.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
pm_runtime_get_sync returns negative on failure.
Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The hmm_devmem_add() function doesn't return NULL, it returns error
pointers.
Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/nouveau/nouveau_dmem.c: In function 'nouveau_dmem_free':
drivers/gpu/drm/nouveau/nouveau_dmem.c:103:22: warning:
variable 'drm' set but not used [-Wunused-but-set-variable]
struct nouveau_drm *drm;
^
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Fix sparse warning:
drivers/irqchip/irq-mvebu-sei.c:481:23: warning:
symbol 'mvebu_sei_ap806_caps' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <jason@lakedaemon.net>
Cc: <andrew@lunn.ch>
Cc: <gregory.clement@bootlin.com>
Cc: <sebastian.hesselbarth@gmail.com>
Cc: <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190321151448.15600-1-yuehaibing@huawei.com
|
|
This patch enables showing bpf program name, address, and size in the
header.
Before the patch:
perf report --header-only
...
# bpf_prog_info of id 9
# bpf_prog_info of id 10
# bpf_prog_info of id 13
After the patch:
# bpf_prog_info 9: bpf_prog_7be49e3934a125ba addr 0xffffffffa0024947 size 229
# bpf_prog_info 10: bpf_prog_2a142ef67aaad174 addr 0xffffffffa007c94d size 229
# bpf_prog_info 13: bpf_prog_47368425825d7384_task__task_newt addr 0xffffffffa0251137 size 369
Committer notes:
Fix the fallback definition when HAVE_LIBBPF_SUPPORT is not defined,
i.e. add the missing 'static inline' and add the __maybe_unused to the
args. Also add stdio.h since we now use FILE * in bpf-event.h.
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190319165454.1298742-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Extract logic to create program names to synthesize_bpf_prog_name(), so
that it can be reused in header.c:print_bpf_prog_info().
This commit doesn't change the behavior.
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190319165454.1298742-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To fully annotate BPF programs with source code mapping, 4 different
information are needed:
1) PERF_RECORD_KSYMBOL
2) PERF_RECORD_BPF_EVENT
3) bpf_prog_info
4) btf
This patch handles 3) and 4) for BPF programs loaded after 'perf
record|top'.
For timely process of these information, a dedicated event is added to
the side band evlist.
When PERF_RECORD_BPF_EVENT is received via the side band event, the
polling thread gathers 3) and 4) vis sys_bpf and store them in perf_env.
This information is saved to perf.data at the end of 'perf record'.
Committer testing:
The 'wakeup_watermark' member in 'struct perf_event_attr' is inside a
unnamed union, so can't be used in a struct designated initialization
with older gccs, get it out of that, isolating as 'attr.wakeup_watermark
= 1;' to work with all gcc versions.
We also need to add '--no-bpf-event' to the 'perf record'
perf_event_attr tests in 'perf test', as the way that that test goes is
to intercept the events being setup and looking if they match the fields
described in the control files, since now it finds first the side band
event used to catch the PERF_RECORD_BPF_EVENT, they all fail.
With these issues fixed:
Same scenario as for testing BPF programs loaded before 'perf record' or
'perf top' starts, only start the BPF programs after 'perf record|top',
so that its information get collected by the sideband threads, the rest
works as for the programs loaded before start monitoring.
Add missing 'inline' to the bpf_event__add_sb_event() when
HAVE_LIBBPF_SUPPORT is not defined, fixing the build in systems without
binutils devel files installed.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-16-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch introduces side band thread that captures extended
information for events like PERF_RECORD_BPF_EVENT.
This new thread uses its own evlist that uses ring buffer with very low
watermark for lower latency.
To use side band thread, we need to:
1. add side band event(s) by calling perf_evlist__add_sb_event();
2. calls perf_evlist__start_sb_thread();
3. at the end of perf run, perf_evlist__stop_sb_thread().
In the next patch, we use this thread to handle PERF_RECORD_BPF_EVENT.
Committer notes:
Add fix by Jiri Olsa for when te sb_tread can't get started and then at
the end the stop_sb_thread() segfaults when joining the (non-existing)
thread.
That can happen when running 'perf top' or 'perf record' as a normal
user, for instance.
Further checks need to be done on top of this to more graciously handle
these possible failure scenarios.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-15-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The getCx86_old() and setCx86_old() macros have been replaced with
correctly working getCx86() and setCx86(), so remove these unused macros.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1552596361-8967-3-git-send-email-tedheadster@gmail.com
|
|
There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:
outb(CX86_CCR2, 0x22);
inb(0x23);
From the comments:
* When using the old macros a line like
* setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
* do {
* outb((CX86_CCR2), 0x22);
* outb((({
* outb((CX86_CCR2), 0x22);
* inb(0x23);
* }) | 0x88), 0x23);
* } while (0);
The new macros fix this problem, so use them instead. Tested on an
actual Geode processor.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@gmail.com
|
Enric Balletbo i Serra
Pi-Hsun Shih
Nick Crews
Enrico Granata
Guenter Roeck
Douglas Anderson
Linus Torvalds
Alexander Shiyan
Darrick J. Wong
zhangyi (F)
Gustavo A. R. Silva
Atish Patra
Kairui Song
Steve French
Paulo Alcantara (SUSE)
Ronnie Sahlberg
Xiaoli Feng
Long Li
YueHaibing
Shenghui Wang
Nathan Chancellor
Valdis Kletnieks
Chen Jie
Lu Baolu
Robert Richter
Jérôme Glisse
Dan Carpenter
Song Liu
Matthew Whitehead