| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Suppose that several linear skbs of the same flow were received by GRO. They
were thus merged into one skb with a frag_list. Then a new skb of the same flow
arrives, but it is a paged skb with data starting in its frags[].
Before adding the skb to the frag_list skb_gro_receive() will of course adjust
the skb to throw away the headers. It correctly modifies the page_offset and
size of the frag, but it leaves incorrect information in the skb:
->data_len is not decreased at all.
->len is decreased only by headlen, as if no change were done to the frag.
Later in a receiving process this causes skb_copy_datagram_iovec() to return
-EFAULT and this is seen in userspace as the result of the recv() syscall.
In practice the bug can be reproduced with the sfc driver. By default the
driver uses an adaptive scheme when it switches between using
napi_gro_receive() (with skbs) and napi_gro_frags() (with pages). The bug is
reproduced when under rx load with enough successful GRO merging the driver
decides to switch from the former to the latter.
Manual control is also possible, so reproducing this is easy with netcat:
- on machine1 (with sfc): nc -l 12345 > /dev/null
- on machine2: nc machine1 12345 < /dev/zero
- on machine1:
echo 1 > /sys/module/sfc/parameters/rx_alloc_method # use skbs
echo 2 > /sys/module/sfc/parameters/rx_alloc_method # use pages
- See that nc has quit suddenly.
[v2: Modified by Eric Dumazet to avoid advancing skb->data past the end
and to use a temporary variable.]
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 941666c2e3e0 "net: RCU conversion of dev_getbyhwaddr() and
arp_ioctl()" introduced a regression, reported by Jamie Heilman.
"arp -Ds 192.168.2.41 eth0 pub" triggered the ASSERT_RTNL() assert
in pneigh_lookup()
Removing RTNL requirement from arp_ioctl() was a mistake, just revert
that part.
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a shutdown regression caused by 2a2d31c8dc6f ("intel_idle: open
broadcast clock event"). The clockevent framework can automatically
shutdown broadcast timers for hotremove CPUs. And we get a shutdown
regression when we shutdown broadcast timer for hot remove CPU, so just
delete some code.
Also fix some section mismatch.
Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Michael Witten and Christian Kujau reported that the autogroup
scheduling feature hurts interactivity on their UP systems.
It turns out that this is an older bug in the group scheduling code,
and the wider appeal provided by the autogroup feature exposed it
more prominently.
When on UP with FAIR_GROUP_SCHED enabled, tune shares
only affect tg->shares, but is not reflected in
tg->se->load. The reason is that update_cfs_shares()
does nothing on UP.
So introduce update_cfs_shares() for UP && FAIR_GROUP_SCHED.
This issue was found when enable autogroup scheduling was enabled,
but it is an older bug that also exists on cgroup.cpu on UP.
Reported-and-Tested-by: Michael Witten <mfwitten@gmail.com>
Reported-and-Tested-by: Christian Kujau <christian@nerdbynature.de>
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110124073352.GA24186@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Now BUILD_BUG_ON() can handle optimizable constants, we don't need
MAYBE_BUILD_BUG_ON any more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
BUILD_BUG_ON used to use the optimizer to do code elimination or fail
at link time; it was changed to first the size of a negative array (a
nicer compile time error), then (in
8c87df457cb58fe75b9b893007917cf8095660a0) to a bitfield.
This forced us to change some non-constant cases to MAYBE_BUILD_BUG_ON();
as Jan points out in that commit, it didn't work as intended anyway.
bitfields: needs a literal constant at parse time, and can't be put under
"if (__builtin_constant_p(x))" for example.
negative array: can handle anything, but if the compiler can't tell it's
a constant, silently has no effect.
link time: breaks link if the compiler can't determine the value, but the
linker output is not usually as informative as a compiler error.
If we use the negative-array-size method *and* the link time trick,
we get the ability to use BUILD_BUG_ON() under __builtin_constant_p()
branches, and maximal ability for the compiler to detect errors at
build time.
We also document it thoroughly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jan Beulich <JBeulich@novell.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
|
|
You always needed them when you were a module, but the builtin versions
of the macros used to be more lenient.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Add an unused struct declaration statement requiring a
terminating semicolon to the compile-in case to provoke an
error if __MODULE_INFO() is used without the terminating
semicolon. Previously MODULE_ALIAS("foo") (no semicolon)
compiled fine if MODULE was not selected.
Cc: Dan Carpenter <error27@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
lib/built-in.o:(__modver+0x8): undefined reference to `__modver_version_show'
lib/built-in.o:(__modver+0x2c): undefined reference to `__modver_version_show'
Simplest to just not emit anything: if they've disabled SYSFS they probably
want the smallest kernel possible.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Currently only drivers that are built as modules have their versions
shown in /sys/module/<module_name>/version, but this information might
also be useful for built-in drivers as well. This especially important
for drivers that do not define any parameters - such drivers, if
built-in, are completely invisible from userspace.
This patch changes MODULE_VERSION() macro so that in case when we are
compiling built-in module, version information is stored in a separate
section. Kernel then uses this data to create 'version' sysfs attribute
in the same fashion it creates attributes for module parameters.
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Return -ENOMEM when memory allocation fails in cond_init_bool_indexes,
correctly propagating error code to caller.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
commit 3f0d3d016d89a5efb8b926d4707eb21fa13f3d27 adds a check for
PNP device id to the common tpm_tis_init() function, which in some
cases (force=1) will be called without the device being a member of
a pnp_dev. Oopsing and panics ensue.
Move the test up to before the call to tpm_tis_init(), since it
just modifies a global variable anyway.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
If duration variable value is 0 at this point, it's because
chip->vendor.duration wasn't filled by tpm_get_timeouts() yet.
This patch sets then the lowest timeout just to give enough
time for tpm_get_timeouts() to further succeed.
This fix avoids long boot times in case another entity attempts
to send commands to the TPM when the TPM isn't accessible.
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
One failure path in security/keys/trusted.c::trusted_update() does
not free 'new_p' while the others do. This patch makes sure we also free
it in the remaining path (if datablob_parse() returns different from
Opt_update).
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Add myself and David Safford as maintainers for trusted/encrypted keys.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Rename encrypted_defined.c and encrypted_defined.h files to encrypted.c and
encrypted.h, respectively. Based on request from David Howells.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Rename trusted_defined.c and trusted_defined.h files to trusted.c and
trusted.h, respectively. Based on request from David Howells.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
If we use jump table in module init, there are marked
as removed in __jump_table section after init is done.
But we already applied ro permissions on the module, so
we can't modify a read only section (crash in
remove_jump_label_module_init).
Make the __jump_table section rw.
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Siarhei Liakh <sliakh.lkml@gmail.com>
Cc: Xuxian Jiang <jiang@cs.ncsu.edu>
Cc: James Morris <jmorris@namei.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4D3C3F20.7030203@free.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix new fs/dcache.c kernel-doc warnings:
Warning(fs/dcache.c:184): No description found for parameter 'dentry'
Warning(fs/dcache.c:296): No description found for parameter 'parent'
Warning(fs/dcache.c:1985): No description found for parameter 'dparent'
Warning(fs/dcache.c:1985): Excess function parameter 'parent' description in 'd_validate'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix new rapidio kernel-doc warnings:
Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev'
Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix move of drivers/serial/ to drivers/tty/, where it broke
one of the docbook files:
docproc: drivers/serial/serial_core.c: No such file or directory
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's enough to include the local "debug.h" file to trigger it.
man time reveals this is already declared in glibc:
time - get time in seconds
-> rename the variable.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: arjan@infradead.org
LPU-Reference: <1295620209-13859-2-git-send-email-trenn@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -Wstack-protector and -Wvolatile-register-var warnings, for
instance, are not supported by gcc 3.4.6.
So fix by doing the same check we already do for -fstack-protector-all.
With this and the other patches in this series, perf builds unmodified
on, for instance, RHEL4.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
[acme@localhost linux]$ make O=~acme/git/build/perf -C tools/perf
make: Entering directory `/home/acme/git/linux/tools/perf'
Makefile:526: No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev
Makefile:582: newt not found, disables TUI support. Please install newt-devel or libnewt-dev
CC /home/acme/git/build/perf/builtin-annotate.o
In file included from builtin-annotate.c:23:
util/parse-events.h:26: warning: declaration of 'evsel_list' shadows a global declaration
util/parse-events.h:12: warning: shadowed declaration is here
make: *** [/home/acme/git/build/perf/builtin-annotate.o] Error 1
make: Leaving directory `/home/acme/git/linux/tools/perf'
[acme@localhost linux]$ gcc --version | head -1
gcc (GCC) 3.4.6 20060404 (Red Hat 3.4.6-11)
[acme@localhost linux]$
Fix it by renaming the parameter to evlist.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need the definiton for __always_inline in bitops.h to fix the build
on distros where it isn't available or compiler.h doesn't get included
indirectly.
One of the fixes needed to build perf on RHEL4 systems, for instance.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Using %L[uxd] has issues in some architectures, like on ppc64. Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.
Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: Denis Kirjanov <dkirjanov@kernel.org>
Tested-by: Denis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Where we don't have CPU_ALLOC & friends. As the tools are being used in older
distros where the only allowed change are to replace the kernel, like RHEL4 and
5.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch adds the driver that creates a platform:softing device
from a pcmcia_device
Note: the Kconfig indicates a dependency on the softing.ko driver,
but this is purely to make configuration intuitive. This driver will
work independent, but no CAN network devices appear until softing.ko is
loaded too.
Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a driver for the platform:softing device.
This will create (up to) 2 CAN network devices from 1
platform:softing device
Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
ea53069231f9317062910d6e772cca4ce93de8c8 made a CPU use monitor/mwait
when offline. This is not the optimal choice for AMD wrt to powersavings
and we'd prefer our cores to halt (i.e. enter C1) instead. For this, the
same selection whether to use monitor/mwait has to be used as when we
select the idle routine for the machine.
With this patch, offlining cores 1-5 on a X6 machine allows core0 to
boost again.
[ hpa: putting this in urgent since it is a (power) regression fix ]
Reported-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: stable@kernel.org # 37.x
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.hl>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1295534572-10730-1-git-send-email-bp@amd64.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
copy_to_user() used PRIV(dev)->stats instead of local stats variable.
Zero stats were returned to user in case of (zero != 0), also memcpy()
was pointless.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix up comments in the key management code. No functional changes.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Do a bit of a style clean up in the key management code. No functional
changes.
Done using:
perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c
perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c
sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c
To remove /*****/ lines, remove comments on the closing brace of a
function to name the function and remove blank lines before the closing
brace of a function.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In theory, almost every user of task->child->perf_event_ctxp[]
is wrong. find_get_context() can install the new context at any
moment, we need read_barrier_depends().
dbe08d82ce3967ccdf459f7951d02589cf967300 "perf: Fix
find_get_context() vs perf_event_exit_task() race" added
rcu_dereference() into perf_event_exit_task_context() to make
the precedent, but this makes __rcu_dereference_check() unhappy.
Use rcu_dereference_raw() to shut up the warning.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: acme@redhat.com
Cc: paulus@samba.org
Cc: stern@rowland.harvard.edu
Cc: a.p.zijlstra@chello.nl
Cc: fweisbec@gmail.com
Cc: roland@redhat.com
Cc: prasad@linux.vnet.ibm.com
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
LKML-Reference: <20110121174547.GA8796@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When some of CPUs are offline:
# cat /sys/devices/system/cpu/online
0,6-31
perf test will fail on #3 testcase:
3: detect open syscall event on all cpus:
--- start ---
perf_evsel__read_on_cpu: expected to intercept 111 calls on cpu 0, got 681
perf_evsel__read_on_cpu: expected to intercept 112 calls on cpu 1, got 117
perf_evsel__read_on_cpu: expected to intercept 113 calls on cpu 2, got 118
perf_evsel__read_on_cpu: expected to intercept 114 calls on cpu 3, got 119
perf_evsel__read_on_cpu: expected to intercept 115 calls on cpu 4, got 120
perf_evsel__read_on_cpu: expected to intercept 116 calls on cpu 5, got 121
perf_evsel__read_on_cpu: expected to intercept 117 calls on cpu 6, got 122
perf_evsel__read_on_cpu: expected to intercept 118 calls on cpu 7, got 123
perf_evsel__read_on_cpu: expected to intercept 119 calls on cpu 8, got 124
perf_evsel__read_on_cpu: expected to intercept 120 calls on cpu 9, got 125
perf_evsel__read_on_cpu: expected to intercept 121 calls on cpu 10, got 126
....
This patch try to use 'cpus->map[cpu]' when setting cpu affinity, and
will check the return code of sched_setaffinity()
LKML-Reference: <20110120114707.GA11781@hpt.nay.redhat.com>
Signed-off-by: Han Pingtian <phan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In ARM's Thumb mode the bottom bit of the symbol address is set to mark
the function as Thumb; the instructions are in reality 2 or 4 byte on 2
byte alignments, and when the +1 address is used in annotate it causes
objdump to disassemble invalid instructions.
The patch removes that bottom bit during symbol loading.
Many thinks to Dave Martin for comments on an initial version of the
patch.
(For reference this corresponds to this bug
https://bugs.launchpad.net/linux-linaro/+bug/677547 )
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Martin <dave.martin@linaro.org>
LKML-Reference: <20110121163922.GA31398@davesworkthinkpad>
Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The patch "thp: export maybe_mkwrite" (commit 14fd403f2146) breaks
systems without MMU.
Error log:
CC arch/microblaze/mm/init.o
In file included from include/linux/mman.h:14,
from arch/microblaze/mm/consistent.c:24:
include/linux/mm.h: In function 'maybe_mkwrite':
include/linux/mm.h:482: error: implicit declaration of function 'pte_mkwrite'
include/linux/mm.h:482: error: incompatible types in assignment
Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The cisco.com address will stop working soon, and besides no one can
remember the second "d" in "rolandd" or how to spell "rdreier."
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The effect of changing the value of this symbol is gone since 042620a
(RTC: Remove UIE emulation).
Remove symbol too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
LKML-Reference: <1295625406-15340-1-git-send-email-u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In reviewing cases where the virtualized interfaces didn't propagate
errors properly, I noticed rtc_read_alarm needed fixing. In doing
so I noticed my RTC rework dropped a memset and that the behavior
of rtc_read_alarm shouldn't be conditionalized on the alarm.enabled
flag (as the alarm may be set, but the irqs may be disabled). So
those were corrected as well.
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
LKML-Reference: <1295565973-14358-2-git-send-email-john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In cases where RTC hardware does not support alarms, the virtualized
RTC interfaces did not have a way to propagate the error up to userland.
This patch extends rtc_timer_enqueue so it catches errors from the hardware
and returns them upwards to the virtualized interfaces. To simplify error
handling, it also internalizes the management of the timer->enabled bit
into rtc_timer_enqueue and rtc_timer_remove.
Also makes rtc_timer_enqueue and rtc_timer_remove static.
Reported-by: David Daney <ddaney@caviumnetworks.com>
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Diagnosed-by: David Daney <ddaney@caviumnetworks.com>
Tested-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
LKML-Reference: <1295565973-14358-1-git-send-email-john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
If the acpi pm timer throws invalid data, clear pmtmr_ioport
so the pm timer won't accidentally be used.
This was found when using Xen where there is a acpi pm reported,
but gives bogus values, and other code was continuing to try
to use the pm timer after the initialization failed.
[jstultz: Catch additional failure and reword changelog message. ]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1295027246-11110-1-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
rtc_dev_update_irq_enable_emul was removed in commit
042620a018afcfba1d678062b62e463b9e43a68d (UIE emulation is
now handled via hrtimer), but the declaration was missed.
This patch cleans it up.
Signed-off-by: John Stultz <john.stultz@linaro.org>
LKML-Reference: <1294939849-20608-1-git-send-email-john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
After changing the p2m mapping to a tree by
commit 58e05027b530ff081ecea68e38de8d59db8f87e0
xen: convert p2m to a 3 level tree
and trying to boot a DomU with 615MB of memory, the following crash was
observed in the dump:
kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c0107397>] xen_set_pte+0x27/0x60
*pdpt = 0000000000000000 *pde = 0000000000000000
Adding further debug statements showed that when trying to set up
pfn=0x26700 the returned mapping was invalid.
pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003)
pfn=0x26700 calling set_pte(0xc1fe7800, 0x3)
Although the last_pfn obtained from the startup info is 0x26700, which
should in turn not be hit, the additional 8MB which are added as extra
memory normally seem to be ok. This lead to looking into the initial
p2m tree construction, which uses the smaller value and assuming that
there is other code handling the extra memory.
When the p2m tree is set up, the leaves are directly pointed to the
array which the domain builder set up. But if the mapping is not on a
boundary that fits into one p2m page, this will result in the last leaf
being only partially valid. And as the invalid entries are not
initialized in that case, things go badly wrong.
I am trying to fix that by checking whether the current leaf is a
complete map and if not, allocate a completely new page and copy only
the valid pointers there. This may not be the most efficient or elegant
solution, but at least it seems to allow me booting DomUs with memory
assignments all over the range.
BugLink: http://bugs.launchpad.net/bugs/686692
[v2: Redid a bit of commit wording and fixed a compile warning]
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Lockdep spotted:
loop_1b_instruc/1899 is trying to acquire lock:
(event_mutex){+.+.+.}, at: [<ffffffff810e1908>] perf_trace_init+0x3b/0x2f7
but task is already holding lock:
(&ctx->mutex){+.+.+.}, at: [<ffffffff810eb45b>] perf_event_init_context+0xc0/0x218
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&ctx->mutex){+.+.+.}:
-> #2 (cpu_hotplug.lock){+.+.+.}:
-> #1 (module_mutex){+.+...}:
-> #0 (event_mutex){+.+.+.}:
But because the deadlock would be cpuhotplug (cpu-event) vs fork
(task-event) it cannot, in fact, happen. We can annotate this by giving the
perf_event_context used for the cpuctx a different lock class from those
used by tasks.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
In therm_throt.c, commit
9e76a97efd31a08cb19d0ba12013b8fb4ad3e474 patch doesn't export
the symbol platform_thermal_notify.
Other drivers (e.g. drivers/hwmon/coretemp.c) can not find the
symbol platform_thermal_notify when defining threshould
interrupt handler.
Please apply this patch to allow threshold interrupt handler in
coretemp.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: R Durgadoss <durgadoss.r@intel.com>
Cc: khali@linux-fr.org <khali@linux-fr.org>
Cc: lm-sensors@lm-sensors.org <lm-sensors@lm-sensors.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
LKML-Reference: <20110121041239.GB26954@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The implementation of the cache flushing interfaces on the x86
is identical with the default implementation in asm-generic.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: arnd@arndb.de
LKML-Reference: <1295523136-4277-2-git-send-email-akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Dike <jdike@addtoit.com>
|
|
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
|
Michal Schmidt
Eric Dumazet
Shaohua Li
Yong Zhang
Rusty Russell
Linus Walleij
Dmitry Torokhov
Davidlohr Bueso
Olof Johansson
Rajiv Andrade
Jesper Juhl
Mimi Zohar
matthieu castet
Randy Dunlap
Thomas Renninger
Arnaldo Carvalho de Melo
Kurt Van Dijck
Linus Torvalds
Borislav Petkov
Vasiliy Kulikov
David Howells
Oleg Nesterov
Han Pingtian
Dr. David Alan Gilbert
Michal Simek
Roland Dreier
Uwe Kleine-König
John Stultz
Konrad Rzeszutek Wilk
Stefan Bader
Peter Zijlstra
Fenghua Yu
Akinobu Mita
Thomas Gleixner