aboutsummaryrefslogtreecommitdiffstats
path: root/lib (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-05-18Bluetooth: Set LE Suggested Default Data Length to maximumMarcel Holtmann1-0/+9
When LE Data Packet Length Extension is supported, then actually increase the suggested default data length to the maximum to enable higher througput. < HCI Command: LE Read Maximum Data Length (0x08|0x002f) plen 0 > HCI Event: Command Complete (0x0e) plen 12 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 2120 Max RX octets: 251 Max RX time: 2120 < HCI Command: LE Read Suggested Default Data Length (0x08|0x0023) plen 0 > HCI Event: Command Complete (0x0e) plen 8 LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1 Status: Success (0x00) TX octets: 27 TX time: 328 < HCI Command: LE Write Suggested Default Data Length (0x08|0x0024) plen 4 TX octets: 251 TX time: 2120 > HCI Event: Command Complete (0x0e) plen 4 LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1 Status: Success (0x00) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-05-18Bluetooth: Add support for Intel Bluetooth device 9460/9560 [8087:0aaa]Tedd Ho-Jeong An1-0/+4
This patch adds support for Intel Bluetooth device 9460/9560 also known as Jefferson Peak (JfP). The firmware downloading mechanism is same as previous generation. So include the new USB product identifier and whitelist the hardware variant. T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0aaa Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Bootloader version: < HCI Command: Intel Read Version (0x3f|0x0005) plen 0 > HCI Event: Command Complete (0x0e) plen 13 Intel Read Version (0x3f|0x0005) ncmd 32 Status: Success (0x00) Hardware platform: 0x37 Hardware variant: 0x11 Hardware revision: 0.0 Firmware variant: 0x06 Firmware revision: 0.1 Firmware build: 42-52.2015 Firmware patch: 0 Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-05-17net: phy: marvell: checkpatch - Fix remaining long linesAndrew Lunn1-4/+8
Fold lines longer than 80 characters Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: marvell: Add helpers to get/set pageAndrew Lunn1-56/+59
Makes the code a bit more readable, and solves quite a few checkpatch warnings of lines longer than 80 characters. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: marvell: Refactor some bigger functionsAndrew Lunn1-213/+271
Break big functions up by using a number of smaller helper function. Solves some of the over 80 lines warnings, by reducing the indentation level. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: marvell: Checkpatch - assignments and comparisonsAndrew Lunn1-3/+5
Avoid multiple assignments Comparisons should place the constant on the right side of the test Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: marvell: Checkpatch - Missing or extra blank linesAndrew Lunn1-3/+2
Remove the extra blank lines, add one in where recommended. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: Marvell: checkpatch - CommentsAndrew Lunn1-13/+15
Use net style comment blocks, and wrap one block with long lines. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: switch TCP TS option (RFC 7323) to 1ms clockEric Dumazet17-199/+178
TCP Timestamps option is defined in RFC 7323 Traditionally on linux, it has been tied to the internal 'jiffies' variable, because it had been a cheap and good enough generator. For TCP flows on the Internet, 1 ms resolution would be much better than 4ms or 10ms (HZ=250 or HZ=100 respectively) For TCP flows in the DC, Google has used usec resolution for more than two years with great success [1] Receive size autotuning (DRS) is indeed more precise and converges faster to optimal window size. This patch converts tp->tcp_mstamp to a plain u64 value storing a 1 usec TCP clock. This choice will allow us to upstream the 1 usec TS option as discussed in IETF 97. [1] https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: replace misc tcp_time_stamp to tcp_jiffies32Eric Dumazet5-6/+6
After this patch, all uses of tcp_time_stamp will require a change when we introduce 1 ms and/or 1 us TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp_lp: cache tcp_time_stampEric Dumazet1-3/+4
tcp_time_stamp will become slightly more expensive soon, cache its value. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp_westwood: use tcp_jiffies32 instead of tcp_time_stampEric Dumazet1-3/+3
This CC does not need 1 ms tcp_time_stamp and can use the jiffy based 'timestamp'. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 in __tcp_oow_rate_limited()Eric Dumazet1-2/+2
This place wants to use tcp_jiffies32, this is good enough. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: uses jiffies_32 to feed tp->chrono_startEric Dumazet2-2/+2
tcp_time_stamp will no longer be tied to jiffies. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 to feed probe_timestampEric Dumazet2-4/+4
Use tcp_jiffies32 instead of tcp_time_stamp, since tcp_time_stamp will soon be only used for TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 for rcv_tstamp and lrcvtimeEric Dumazet5-8/+8
Use tcp_jiffies32 instead of tcp_time_stamp, since tcp_time_stamp will soon be only used for TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: bic, cubic: use tcp_jiffies32 instead of tcp_time_stampEric Dumazet2-9/+9
Use tcp_jiffies32 instead of tcp_time_stamp, since tcp_time_stamp will soon be only used for TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp_bbr: use tcp_jiffies32 instead of tcp_time_stampEric Dumazet1-6/+6
Use tcp_jiffies32 instead of tcp_time_stamp, since tcp_time_stamp will soon be only used for TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 to feed tp->snd_cwnd_stampEric Dumazet3-12/+12
Use tcp_jiffies32 instead of tcp_time_stamp to feed tp->snd_cwnd_stamp. tcp_time_stamp will soon be a litle bit more expensive than simply reading 'jiffies'. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 to feed tp->lsndtimeEric Dumazet6-9/+9
Use tcp_jiffies32 instead of tcp_time_stamp to feed tp->lsndtime. tcp_time_stamp will soon be a litle bit more expensive than simply reading 'jiffies'. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17dccp: do not use tcp_time_stampEric Dumazet2-5/+5
Use our own macro instead of abusing tcp_time_stamp Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: introduce tcp_jiffies32Eric Dumazet1-5/+8
We abuse tcp_time_stamp for two different cases : 1) base to generate TCP Timestamp options (RFC 7323) 2) A 32bit version of jiffies since some TCP fields are 32bit wide to save memory. Since we want in the future to have 1ms TCP TS clock, regardless of HZ value, we want to cleanup things. tcp_jiffies32 is the truncated jiffies value, which will be used only in places where we want a 'host' timestamp. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tp->tcp_mstamp in output pathEric Dumazet4-12/+14
Idea is to later convert tp->tcp_mstamp to a full u64 counter using usec resolution, so that we can later have fine grained TCP TS clock (RFC 7323), regardless of HZ value. We try to refresh tp->tcp_mstamp only when necessary. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17sch_dsmark: Fix uninitialized variable warning.David S. Miller1-1/+1
We still need to initialize err to -EINVAL for the case where 'opt' is NULL in dsmark_init(). Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: add termination action to allow goto chainJiri Pirko5-3/+54
Introduce new type of termination action called "goto_chain". This allows user to specify a chain to be processed. This action type is then processed as a return value in tcf_classify loop in similar way as "reclassify" is, only it does not reset to the first filter in chain but rather reset to the first filter of the desired chain. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: push tp down to action initJiri Pirko3-17/+19
Tp pointer will be needed by the next patch in order to get the chain. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: introduce multichain support for filtersJiri Pirko4-18/+98
Instead of having only one filter per block, introduce a list of chains for every block. Create chain 0 by default. UAPI is extended so the user can specify which chain he wants to change. If the new attribute is not specified, chain 0 is used. That allows to maintain backward compatibility. If chain does not exist and user wants to manipulate with it, new chain is created with specified index. Also, when last filter is removed from the chain, the chain is destroyed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: push chain dump to a separate functionJiri Pirko1-43/+52
Since there will be multiple chains to dump, push chain dumping code to a separate function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: introduce helpers to work with filter chainsJiri Pirko2-42/+113
Introduce struct tcf_chain object and set of helpers around it. Wraps up insertion, deletion and search in the filter chain. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: move TC_H_MAJ macro call into tcf_auto_prioJiri Pirko1-2/+2
Call the helper from the function rather than to always adjust the return value of the function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: replace nprio by a bool to make the function more readableJiri Pirko1-6/+7
The use of "nprio" variable in tc_ctl_tfilter is a bit cryptic and makes a reader wonder what is going on for a while. So help him to understand this priority allocation dance a litte bit better. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: rename tcf_destroy_chain helperJiri Pirko1-3/+3
Make the name consistent with the rest of the helpers around. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: introduce tcf block infractructureJiri Pirko17-99/+243
Currently, the filter chains are direcly put into the private structures of qdiscs. In order to be able to have multiple chains per qdisc and to allow filter chains sharing among qdiscs, there is a need for common object that would hold the chains. This introduces such object and calls it "tcf_block". Helpers to get and put the blocks are provided to be called from individual qdisc code. Also, the original filter_list pointers are left in qdisc privs to allow the entry into tcf_block processing without any added overhead of possible multiple pointer dereference on fast path. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: move tc_classify function to cls_api.cJiri Pirko17-65/+72
Move tc_classify function to cls_api.c where it belongs, rename it to fit the namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17drivers: net: DSA: Sort driversAndrew Lunn2-23/+23
With more drivers being added, it is time to sort the drivers to impose some order. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: Sort DSA tagging protocol driversAndrew Lunn5-29/+29
With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17liquidio: fix PF falsely indicating success at setting MAC address of a nonexistent VFFelix Manlunas1-0/+3
In the function assigned to .ndo_set_vf_mac, check the validity of the vfidx argument before proceeding to tell the firmware to set the VF MAC address. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17liquidio: fix insmod failure when multiple NICs are plugged inRick Farrington3-10/+123
When multiple liquidio NICs are plugged in, the first insmod of the PF driver succeeds. But after an rmmod, a subsequent insmod fails. Reason is during rmmod, the PF driver resets the Octeon of only one of the NICs; it neglects to reset the Octeons of the other NICs. Fix the insmod failure by adding the missing Octeon resets at rmmod. Keep a per-NIC refcount that indicates the number of active PFs in a given NIC. When the refcount goes to zero, then reset the Octeon of that NIC. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: store CPU port pointer in the treeVivien Didelot11-35/+30
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum: Default ports to non-virtual modeIdo Schimmel1-0/+8
In virtual mode, packets are classified to FIDs based on their ingress port and VLAN whereas in non-virtual mode only the VLAN is taken into account. Currently ports are initialized to use virtual mode due to the presence of the PVID vPort. However, we're going to transition ports between both modes based on the FIDs they use and not merely based on the presence on a VLAN upper. Therefore, during initialization, no mode will be explicitly set. Since the Programmer's Reference Manual (PRM) doesn't specify a default, explicitly set the port to non-virtual mode and later transition the port between both modes based on the FIDs it uses. In a follow-up patchset, this step will be moved to the common FID core where it logically belongs. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum: Move PVID code to appropriate placeIdo Schimmel3-58/+46
PVID is a port attribute and should therefore reside in the main driver file and not the switchdev specific one. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_switchdev: Don't batch learning operationsIdo Schimmel3-20/+7
We no longer batch VLAN operations, so there's no need to set the learning state for a range of VLANs. Use a common function to set the learning state for a Port-VLAN, thereby making the code saner more receptive for upcoming changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_switchdev: Don't batch STP operationsIdo Schimmel1-42/+17
Simplify the code by using the common function that sets an STP state for a Port-VLAN and remove the existing one that tries to batch it for several VLANs. This will help us in a follow-up patchset to introduce a unified infrastructure for bridge ports, regardless if the bridge is VLAN-aware or not. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_switchdev: Don't batch VLAN operationsIdo Schimmel3-139/+121
switchdev's VLAN object has the ability to describe a range of VLAN IDs, but this is only used when VLAN operations are done using the SELF flag, which is something we would like to remove as it allows one to bypass the bridge driver. Do VLAN operations on a per-VLAN basis, thereby simplifying the code and preparing it for refactoring in a follow-up patchset. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_switchdev: Remove redundant checkIdo Schimmel1-9/+0
Since commit 97c242902c20 ("switchdev: Execute bridge ndos only for bridge ports") switchdev code checks that port is bridged, so no need to perform the same check in the driver. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_router: Initialize RIFs in a separate functionIdo Schimmel1-18/+30
The router interfaces (RIFs) array is currently initialized together with the general router configuration. However, in a follow-up patchset we're going to introduce a common RIF core that will require us to initialize more RIF constructs, so move the RIF initialization to its own function. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_router: Move FIB notification block to router structIdo Schimmel2-8/+10
The FIB notification block logically belongs inside the router specific struct, so move it there. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_router: Move RIFs array to its rightful placeIdo Schimmel4-24/+35
The router interfaces (RIFs) array is of no interest to code outside the routing realm, so declare it inside the router specific struct instead of the chip-wide one. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_switchdev: Reduce scope of bridge structIdo Schimmel4-37/+69
Some attributes in the global chip struct are only relevant for bridge operation, so encapsulate them in their own struct that isn't exposed to non-bridge code. This will also help us later, when we add more bridge-specific attributes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_router: Reduce scope of router structIdo Schimmel2-114/+130
In a similar fashion to previous patch, the router structure ('mlxsw_sp_router') doesn't need to be accessible to anyone, but the router code located at spectrum_router.c Make this apparent and reduce its scope by defining it there. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.