aboutsummaryrefslogtreecommitdiffstats
path: root/lib (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-13XArray: Fix xa_alloc when id exceeds maxMatthew Wilcox2-5/+36
Specifying a starting ID greater than the maximum ID isn't something attempted very often, but it should fail. It was succeeding due to xas_find_marked() returning the wrong error state, so add tests for both xa_alloc() and xas_find_marked(). Fixes: b803b42823d0 ("xarray: Add XArray iterators") Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-12-13iov_iter: introduce hash_and_copy_to_iter helperSagi Grimberg1-0/+16
Allow consumers that want to use iov iterator helpers and also update a predefined hash calculation online when copying data. This is useful when copying incoming network buffers to a local iterator and calculate a digest on the incoming stream. nvme-tcp host driver that will be introduced in following patches is the first consumer via skb_copy_and_hash_datagram_iter. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-13iov_iter: pass void csum pointer to csum_and_copy_to_iterSagi Grimberg1-1/+2
The single caller to csum_and_copy_to_iter is skb_copy_and_csum_datagram and we are trying to unite its logic with skb_copy_datagram_iter by passing a callback to the copy function that we want to apply. Thus, we need to make the checksum pointer private to the function. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-11sbitmap: flush deferred clears for resize and shallow getsJens Axboe1-43/+51
We're missing a deferred clear off the shallow get, which can cause a hang. Additionally, when we resize the sbitmap, we should also flush deferred clears for good measure. Ensure we have full coverage on batch clears, even for paths where we would not be doing deferred clear. This makes it less error prone for future additions. Reported-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10lib/vsprintf: Print time and date in human readable format via %ptAndy Shevchenko2-3/+158
There are users which print time and date represented by content of struct rtc_time in human readable format. Instead of open coding that each time introduce %ptR[dt][r] specifier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-6/+40
Several conflicts, seemingly all over the place. I used Stephen Rothwell's sample resolutions for many of these, if not just to double check my own work, so definitely the credit largely goes to him. The NFP conflict consisted of a bug fix (moving operations past the rhashtable operation) while chaning the initial argument in the function call in the moved code. The net/dsa/master.c conflict had to do with a bug fix intermixing of making dsa_master_set_mtu() static with the fixing of the tagging attribute location. cls_flower had a conflict because the dup reject fix from Or overlapped with the addition of port range classifiction. __set_phy_supported()'s conflict was relatively easy to resolve because Andrew fixed it in both trees, so it was just a matter of taking the net-next copy. Or at least I think it was :-) Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup() intermixed with changes on how the sdif and caller_net are calculated in these code paths in net-next. The remaining BPF conflicts were largely about the addition of the __bpf_md_ptr stuff in 'net' overlapping with adjustments and additions to the relevant data structure where the MD pointer macros are used. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-09sbitmap: silence bogus lockdep IRQ warningJens Axboe1-0/+8
Ming reports that lockdep spews the following trace. What this essentially says is that the sbitmap swap_lock was used inconsistently in IRQ enabled and disabled context, and that is usually indicative of a bug that will cause a deadlock. For this case, it's a false positive. The swap_lock is used from process context only, when we swap the bits in the word and cleared mask. We also end up doing that when we are getting a driver tag, from the blk_mq_mark_tag_wait(), and from there we hold the waitqueue lock with IRQs disabled. However, this isn't from an actual IRQ, it's still process context. In lieu of a better way to fix this, simply always disable interrupts when grabbing the swap_lock if lockdep is enabled. [ 100.967642] ================start test sanity/001================ [ 101.238280] null: module loaded [ 106.093735] [ 106.094012] ===================================================== [ 106.094854] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 106.095759] 4.20.0-rc3_5d2ee7122c73_for-next+ #1 Not tainted [ 106.096551] ----------------------------------------------------- [ 106.097386] fio/1043 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 106.098231] 000000004c43fa71 (&(&sb->map[i].swap_lock)->rlock){+.+.}, at: sbitmap_get+0xd5/0x22c [ 106.099431] [ 106.099431] and this task is already holding: [ 106.100229] 000000007eec8b2f (&(&hctx->dispatch_wait_lock)->rlock){....}, at: blk_mq_dispatch_rq_list+0x4c1/0xd7c [ 106.101630] which would create a new lock dependency: [ 106.102326] (&(&hctx->dispatch_wait_lock)->rlock){....} -> (&(&sb->map[i].swap_lock)->rlock){+.+.} [ 106.103553] [ 106.103553] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 106.104580] (&sbq->ws[i].wait){..-.} [ 106.104582] [ 106.104582] ... which became SOFTIRQ-irq-safe at: [ 106.105751] _raw_spin_lock_irqsave+0x4b/0x82 [ 106.106284] __wake_up_common_lock+0x119/0x1b9 [ 106.106825] sbitmap_queue_wake_up+0x33f/0x383 [ 106.107456] sbitmap_queue_clear+0x4c/0x9a [ 106.108046] __blk_mq_free_request+0x188/0x1d3 [ 106.108581] blk_mq_free_request+0x23b/0x26b [ 106.109102] scsi_end_request+0x345/0x5d7 [ 106.109587] scsi_io_completion+0x4b5/0x8f0 [ 106.110099] scsi_finish_command+0x412/0x456 [ 106.110615] scsi_softirq_done+0x23f/0x29b [ 106.111115] blk_done_softirq+0x2a7/0x2e6 [ 106.111608] __do_softirq+0x360/0x6ad [ 106.112062] run_ksoftirqd+0x2f/0x5b [ 106.112499] smpboot_thread_fn+0x3a5/0x3db [ 106.113000] kthread+0x1d4/0x1e4 [ 106.113457] ret_from_fork+0x3a/0x50 [ 106.113969] [ 106.113969] to a SOFTIRQ-irq-unsafe lock: [ 106.114672] (&(&sb->map[i].swap_lock)->rlock){+.+.} [ 106.114674] [ 106.114674] ... which became SOFTIRQ-irq-unsafe at: [ 106.116000] ... [ 106.116003] _raw_spin_lock+0x33/0x64 [ 106.116676] sbitmap_get+0xd5/0x22c [ 106.117134] __sbitmap_queue_get+0xe8/0x177 [ 106.117731] __blk_mq_get_tag+0x1e6/0x22d [ 106.118286] blk_mq_get_tag+0x1db/0x6e4 [ 106.118756] blk_mq_get_driver_tag+0x161/0x258 [ 106.119383] blk_mq_dispatch_rq_list+0x28e/0xd7c [ 106.120043] blk_mq_do_dispatch_sched+0x23a/0x287 [ 106.120607] blk_mq_sched_dispatch_requests+0x379/0x3fc [ 106.121234] __blk_mq_run_hw_queue+0x137/0x17e [ 106.121781] __blk_mq_delay_run_hw_queue+0x80/0x25f [ 106.122366] blk_mq_run_hw_queue+0x151/0x187 [ 106.122887] blk_mq_sched_insert_requests+0x13f/0x175 [ 106.123492] blk_mq_flush_plug_list+0x7d6/0x81b [ 106.124042] blk_flush_plug_list+0x392/0x3d7 [ 106.124557] blk_finish_plug+0x37/0x4f [ 106.125019] read_pages+0x3ef/0x430 [ 106.125446] __do_page_cache_readahead+0x18e/0x2fc [ 106.126027] force_page_cache_readahead+0x121/0x133 [ 106.126621] page_cache_sync_readahead+0x35f/0x3bb [ 106.127229] generic_file_buffered_read+0x410/0x1860 [ 106.127932] __vfs_read+0x319/0x38f [ 106.128415] vfs_read+0xd2/0x19a [ 106.128817] ksys_read+0xb9/0x135 [ 106.129225] do_syscall_64+0x140/0x385 [ 106.129684] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 106.130292] [ 106.130292] other info that might help us debug this: [ 106.130292] [ 106.131226] Chain exists of: [ 106.131226] &sbq->ws[i].wait --> &(&hctx->dispatch_wait_lock)->rlock --> &(&sb->map[i].swap_lock)->rlock [ 106.131226] [ 106.132865] Possible interrupt unsafe locking scenario: [ 106.132865] [ 106.133659] CPU0 CPU1 [ 106.134194] ---- ---- [ 106.134733] lock(&(&sb->map[i].swap_lock)->rlock); [ 106.135318] local_irq_disable(); [ 106.136014] lock(&sbq->ws[i].wait); [ 106.136747] lock(&(&hctx->dispatch_wait_lock)->rlock); [ 106.137742] <Interrupt> [ 106.138110] lock(&sbq->ws[i].wait); [ 106.138625] [ 106.138625] *** DEADLOCK *** [ 106.138625] [ 106.139430] 3 locks held by fio/1043: [ 106.139947] #0: 0000000076ff0fd9 (rcu_read_lock){....}, at: hctx_lock+0x29/0xe8 [ 106.140813] #1: 000000002feb1016 (&sbq->ws[i].wait){..-.}, at: blk_mq_dispatch_rq_list+0x4ad/0xd7c [ 106.141877] #2: 000000007eec8b2f (&(&hctx->dispatch_wait_lock)->rlock){....}, at: blk_mq_dispatch_rq_list+0x4c1/0xd7c [ 106.143267] [ 106.143267] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 106.144351] -> (&sbq->ws[i].wait){..-.} ops: 82 { [ 106.144926] IN-SOFTIRQ-W at: [ 106.145314] _raw_spin_lock_irqsave+0x4b/0x82 [ 106.146042] __wake_up_common_lock+0x119/0x1b9 [ 106.146785] sbitmap_queue_wake_up+0x33f/0x383 [ 106.147567] sbitmap_queue_clear+0x4c/0x9a [ 106.148379] __blk_mq_free_request+0x188/0x1d3 [ 106.149148] blk_mq_free_request+0x23b/0x26b [ 106.149864] scsi_end_request+0x345/0x5d7 [ 106.150546] scsi_io_completion+0x4b5/0x8f0 [ 106.151367] scsi_finish_command+0x412/0x456 [ 106.152157] scsi_softirq_done+0x23f/0x29b [ 106.152855] blk_done_softirq+0x2a7/0x2e6 [ 106.153537] __do_softirq+0x360/0x6ad [ 106.154280] run_ksoftirqd+0x2f/0x5b [ 106.155020] smpboot_thread_fn+0x3a5/0x3db [ 106.155828] kthread+0x1d4/0x1e4 [ 106.156526] ret_from_fork+0x3a/0x50 [ 106.157267] INITIAL USE at: [ 106.157713] _raw_spin_lock_irqsave+0x4b/0x82 [ 106.158542] prepare_to_wait_exclusive+0xa8/0x215 [ 106.159421] blk_mq_get_tag+0x34f/0x6e4 [ 106.160186] blk_mq_get_request+0x48e/0xaef [ 106.160997] blk_mq_make_request+0x27e/0xbd2 [ 106.161828] generic_make_request+0x4d1/0x873 [ 106.162661] submit_bio+0x20c/0x253 [ 106.163379] mpage_bio_submit+0x44/0x4b [ 106.164142] mpage_readpages+0x3c2/0x407 [ 106.164919] read_pages+0x13a/0x430 [ 106.165633] __do_page_cache_readahead+0x18e/0x2fc [ 106.166530] force_page_cache_readahead+0x121/0x133 [ 106.167439] page_cache_sync_readahead+0x35f/0x3bb [ 106.168337] generic_file_buffered_read+0x410/0x1860 [ 106.169255] __vfs_read+0x319/0x38f [ 106.169977] vfs_read+0xd2/0x19a [ 106.170662] ksys_read+0xb9/0x135 [ 106.171356] do_syscall_64+0x140/0x385 [ 106.172120] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 106.173051] } [ 106.173308] ... key at: [<ffffffff85094600>] __key.26481+0x0/0x40 [ 106.174219] ... acquired at: [ 106.174646] _raw_spin_lock+0x33/0x64 [ 106.175183] blk_mq_dispatch_rq_list+0x4c1/0xd7c [ 106.175843] blk_mq_do_dispatch_sched+0x23a/0x287 [ 106.176518] blk_mq_sched_dispatch_requests+0x379/0x3fc [ 106.177262] __blk_mq_run_hw_queue+0x137/0x17e [ 106.177900] __blk_mq_delay_run_hw_queue+0x80/0x25f [ 106.178591] blk_mq_run_hw_queue+0x151/0x187 [ 106.179207] blk_mq_sched_insert_requests+0x13f/0x175 [ 106.179926] blk_mq_flush_plug_list+0x7d6/0x81b [ 106.180571] blk_flush_plug_list+0x392/0x3d7 [ 106.181187] blk_finish_plug+0x37/0x4f [ 106.181737] __se_sys_io_submit+0x171/0x304 [ 106.182346] do_syscall_64+0x140/0x385 [ 106.182895] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 106.183607] [ 106.183830] -> (&(&hctx->dispatch_wait_lock)->rlock){....} ops: 1 { [ 106.184691] INITIAL USE at: [ 106.185119] _raw_spin_lock+0x33/0x64 [ 106.185838] blk_mq_dispatch_rq_list+0x4c1/0xd7c [ 106.186697] blk_mq_do_dispatch_sched+0x23a/0x287 [ 106.187551] blk_mq_sched_dispatch_requests+0x379/0x3fc [ 106.188481] __blk_mq_run_hw_queue+0x137/0x17e [ 106.189307] __blk_mq_delay_run_hw_queue+0x80/0x25f [ 106.190189] blk_mq_run_hw_queue+0x151/0x187 [ 106.190989] blk_mq_sched_insert_requests+0x13f/0x175 [ 106.191902] blk_mq_flush_plug_list+0x7d6/0x81b [ 106.192739] blk_flush_plug_list+0x392/0x3d7 [ 106.193535] blk_finish_plug+0x37/0x4f [ 106.194269] __se_sys_io_submit+0x171/0x304 [ 106.195059] do_syscall_64+0x140/0x385 [ 106.195794] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 106.196705] } [ 106.196950] ... key at: [<ffffffff84880620>] __key.51231+0x0/0x40 [ 106.197853] ... acquired at: [ 106.198270] lock_acquire+0x280/0x2f3 [ 106.198806] _raw_spin_lock+0x33/0x64 [ 106.199337] sbitmap_get+0xd5/0x22c [ 106.199850] __sbitmap_queue_get+0xe8/0x177 [ 106.200450] __blk_mq_get_tag+0x1e6/0x22d [ 106.201035] blk_mq_get_tag+0x1db/0x6e4 [ 106.201589] blk_mq_get_driver_tag+0x161/0x258 [ 106.202237] blk_mq_dispatch_rq_list+0x5b9/0xd7c [ 106.202902] blk_mq_do_dispatch_sched+0x23a/0x287 [ 106.203572] blk_mq_sched_dispatch_requests+0x379/0x3fc [ 106.204316] __blk_mq_run_hw_queue+0x137/0x17e [ 106.204956] __blk_mq_delay_run_hw_queue+0x80/0x25f [ 106.205649] blk_mq_run_hw_queue+0x151/0x187 [ 106.206269] blk_mq_sched_insert_requests+0x13f/0x175 [ 106.206997] blk_mq_flush_plug_list+0x7d6/0x81b [ 106.207644] blk_flush_plug_list+0x392/0x3d7 [ 106.208264] blk_finish_plug+0x37/0x4f [ 106.208814] __se_sys_io_submit+0x171/0x304 [ 106.209415] do_syscall_64+0x140/0x385 [ 106.209965] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 106.210684] [ 106.210904] [ 106.210904] the dependencies between the lock to be acquired [ 106.210905] and SOFTIRQ-irq-unsafe lock: [ 106.212541] -> (&(&sb->map[i].swap_lock)->rlock){+.+.} ops: 1969 { [ 106.213393] HARDIRQ-ON-W at: [ 106.213840] _raw_spin_lock+0x33/0x64 [ 106.214570] sbitmap_get+0xd5/0x22c [ 106.215282] __sbitmap_queue_get+0xe8/0x177 [ 106.216086] __blk_mq_get_tag+0x1e6/0x22d [ 106.216876] blk_mq_get_tag+0x1db/0x6e4 [ 106.217627] blk_mq_get_driver_tag+0x161/0x258 [ 106.218465] blk_mq_dispatch_rq_list+0x28e/0xd7c [ 106.219326] blk_mq_do_dispatch_sched+0x23a/0x287 [ 106.220198] blk_mq_sched_dispatch_requests+0x379/0x3fc [ 106.221138] __blk_mq_run_hw_queue+0x137/0x17e [ 106.221975] __blk_mq_delay_run_hw_queue+0x80/0x25f [ 106.222874] blk_mq_run_hw_queue+0x151/0x187 [ 106.223686] blk_mq_sched_insert_requests+0x13f/0x175 [ 106.224597] blk_mq_flush_plug_list+0x7d6/0x81b [ 106.225444] blk_flush_plug_list+0x392/0x3d7 [ 106.226255] blk_finish_plug+0x37/0x4f [ 106.227006] read_pages+0x3ef/0x430 [ 106.227717] __do_page_cache_readahead+0x18e/0x2fc [ 106.228595] force_page_cache_readahead+0x121/0x133 [ 106.229491] page_cache_sync_readahead+0x35f/0x3bb [ 106.230373] generic_file_buffered_read+0x410/0x1860 [ 106.231277] __vfs_read+0x319/0x38f [ 106.231986] vfs_read+0xd2/0x19a [ 106.232666] ksys_read+0xb9/0x135 [ 106.233350] do_syscall_64+0x140/0x385 [ 106.234097] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 106.235012] SOFTIRQ-ON-W at: [ 106.235460] _raw_spin_lock+0x33/0x64 [ 106.236195] sbitmap_get+0xd5/0x22c [ 106.236913] __sbitmap_queue_get+0xe8/0x177 [ 106.237715] __blk_mq_get_tag+0x1e6/0x22d [ 106.238488] blk_mq_get_tag+0x1db/0x6e4 [ 106.239244] blk_mq_get_driver_tag+0x161/0x258 [ 106.240079] blk_mq_dispatch_rq_list+0x28e/0xd7c [ 106.240937] blk_mq_do_dispatch_sched+0x23a/0x287 [ 106.241806] blk_mq_sched_dispatch_requests+0x379/0x3fc [ 106.242751] __blk_mq_run_hw_queue+0x137/0x17e [ 106.243579] __blk_mq_delay_run_hw_queue+0x80/0x25f [ 106.244469] blk_mq_run_hw_queue+0x151/0x187 [ 106.245277] blk_mq_sched_insert_requests+0x13f/0x175 [ 106.246191] blk_mq_flush_plug_list+0x7d6/0x81b [ 106.247044] blk_flush_plug_list+0x392/0x3d7 [ 106.247859] blk_finish_plug+0x37/0x4f [ 106.248749] read_pages+0x3ef/0x430 [ 106.249463] __do_page_cache_readahead+0x18e/0x2fc [ 106.250357] force_page_cache_readahead+0x121/0x133 [ 106.251263] page_cache_sync_readahead+0x35f/0x3bb [ 106.252157] generic_file_buffered_read+0x410/0x1860 [ 106.253084] __vfs_read+0x319/0x38f [ 106.253808] vfs_read+0xd2/0x19a [ 106.254488] ksys_read+0xb9/0x135 [ 106.255186] do_syscall_64+0x140/0x385 [ 106.255943] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 106.256867] INITIAL USE at: [ 106.257300] _raw_spin_lock+0x33/0x64 [ 106.258033] sbitmap_get+0xd5/0x22c [ 106.258747] __sbitmap_queue_get+0xe8/0x177 [ 106.259542] __blk_mq_get_tag+0x1e6/0x22d [ 106.260320] blk_mq_get_tag+0x1db/0x6e4 [ 106.261072] blk_mq_get_driver_tag+0x161/0x258 [ 106.261902] blk_mq_dispatch_rq_list+0x28e/0xd7c [ 106.262762] blk_mq_do_dispatch_sched+0x23a/0x287 [ 106.263626] blk_mq_sched_dispatch_requests+0x379/0x3fc [ 106.264571] __blk_mq_run_hw_queue+0x137/0x17e [ 106.265409] __blk_mq_delay_run_hw_queue+0x80/0x25f [ 106.266302] blk_mq_run_hw_queue+0x151/0x187 [ 106.267111] blk_mq_sched_insert_requests+0x13f/0x175 [ 106.268028] blk_mq_flush_plug_list+0x7d6/0x81b [ 106.268878] blk_flush_plug_list+0x392/0x3d7 [ 106.269694] blk_finish_plug+0x37/0x4f [ 106.270432] read_pages+0x3ef/0x430 [ 106.271139] __do_page_cache_readahead+0x18e/0x2fc [ 106.272040] force_page_cache_readahead+0x121/0x133 [ 106.272932] page_cache_sync_readahead+0x35f/0x3bb [ 106.273811] generic_file_buffered_read+0x410/0x1860 [ 106.274709] __vfs_read+0x319/0x38f [ 106.275407] vfs_read+0xd2/0x19a [ 106.276074] ksys_read+0xb9/0x135 [ 106.276764] do_syscall_64+0x140/0x385 [ 106.277500] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 106.278417] } [ 106.278676] ... key at: [<ffffffff85094640>] __key.26212+0x0/0x40 [ 106.279586] ... acquired at: [ 106.280026] lock_acquire+0x280/0x2f3 [ 106.280559] _raw_spin_lock+0x33/0x64 [ 106.281101] sbitmap_get+0xd5/0x22c [ 106.281610] __sbitmap_queue_get+0xe8/0x177 [ 106.282221] __blk_mq_get_tag+0x1e6/0x22d [ 106.282809] blk_mq_get_tag+0x1db/0x6e4 [ 106.283368] blk_mq_get_driver_tag+0x161/0x258 [ 106.284018] blk_mq_dispatch_rq_list+0x5b9/0xd7c [ 106.284685] blk_mq_do_dispatch_sched+0x23a/0x287 [ 106.285371] blk_mq_sched_dispatch_requests+0x379/0x3fc [ 106.286135] __blk_mq_run_hw_queue+0x137/0x17e [ 106.286806] __blk_mq_delay_run_hw_queue+0x80/0x25f [ 106.287515] blk_mq_run_hw_queue+0x151/0x187 [ 106.288149] blk_mq_sched_insert_requests+0x13f/0x175 [ 106.289041] blk_mq_flush_plug_list+0x7d6/0x81b [ 106.289912] blk_flush_plug_list+0x392/0x3d7 [ 106.290590] blk_finish_plug+0x37/0x4f [ 106.291238] __se_sys_io_submit+0x171/0x304 [ 106.291864] do_syscall_64+0x140/0x385 [ 106.292534] entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Ming Lei <ming.lei@redhat.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-06arch: switch the default on ARCH_HAS_SG_CHAINChristoph Hellwig2-2/+2
These days architectures are mostly out of the business of dealing with struct scatterlist at all, unless they have architecture specific iommu drivers. Replace the ARCH_HAS_SG_CHAIN symbol with a ARCH_NO_SG_CHAIN one only enabled for architectures with horrible legacy iommu drivers like alpha and parisc, and conditionally for arm which wants to keep it disable for legacy platforms. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-06XArray tests: Check iterating over multiorder entriesMatthew Wilcox1-0/+31
There was no bug here, but there was no test coverage for this scenario. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-12-06XArray tests: Handle larger indices more elegantlyMatthew Wilcox1-43/+48
xa_mk_value() only handles values up to LONG_MAX. I successfully hid that inside xa_store_index() and xa_erase_index(), but it turned out I also needed it for testing xa_alloc() on 32-bit machines. So extract xa_mk_index() from the above two functions, and convert the non-constant users of xa_mk_value() to xa_mk_index(). Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-12-06radix tree: Don't return retry entries from lookupMatthew Wilcox1-2/+2
Commit 66ee620f06f9 ("idr: Permit any valid kernel pointer to be stored") changed the radix tree lookup so that it stops when reaching the bottom of the tree. However, the condition was added in the wrong place, making it possible to return retry entries to the caller. Reorder the tests to check for the retry entry before checking whether we're at the bottom of the tree. The retry entry should never be found in the tree root, so it's safe to defer the check until the end of the loop. Add a regression test to the test-suite to be sure this doesn't come back. Fixes: 66ee620f06f9 ("idr: Permit any valid kernel pointer to be stored") Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-12-06kref/kobject: Improve documentationEzequiel Garcia1-1/+1
The current kref and kobject documentation may be insufficient to understand these common pitfalls regarding object lifetime and object releasing. Add a bit more documentation and improve the warnings seen by the user, pointing to the right piece of documentation. Also, it's important to understand that making fun of people publicly is not at all helpful, doesn't provide any value, and it's not a healthy way of encouraging developers to do better. "Mocking mercilessly" will, if anything, make developers feel bad and go away. This kind of behavior should not be encouraged or justified. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-04Merge tag 'v4.20-rc5' into for-4.21/blockJens Axboe7-88/+148
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and also getting the merge fix that went into mainline that users are hitting testing for-4.21/block and/or for-next. * tag 'v4.20-rc5': (664 commits) Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace psi: make disabling/enabling easier for vendor kernels proc: fixup map_files test on arm debugobjects: avoid recursive calls with kmemleak userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set ...
2018-12-04Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcuIngo Molnar1-1/+1
Pull RCU changes from Paul E. McKenney: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-03Merge tag 'wireless-drivers-next-for-davem-2018-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextDavid S. Miller1-16/+7
Kalle Valo says: ==================== wireless-drivers-next patches for 4.21 First set of patches for 4.21. Most notable here is support for Quantenna's QSR1000/QSR2000 chipsets and more flexible ways to provide nvram files for brcmfmac. Major changes: brcmfmac * add support for first trying to get a board specific nvram file * add support for getting nvram contents from EFI variables qtnfmac * use single PCIe driver for all platforms and rename Kconfig option CONFIG_QTNFMAC_PEARL_PCIE to CONFIG_QTNFMAC_PCIE * add support for QSR1000/QSR2000 (Topaz) family of chipsets ath10k * add support for WCN3990 firmware crash recovery * add firmware memory dump support for QCA4019 wil6210 * add firmware error recovery while in AP mode ath9k * remove experimental notice from dynack feature iwlwifi * PCI IDs for some new 9000-series cards * improve antenna usage on connection problems * new firmware debugging infrastructure * some more work on 802.11ax * improve support for multiple RF modules with 22000 devices cordic * move cordic macros and defines to a public header file * convert brcmsmac and b43 to fully use cordic library ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03rhashtable: detect when object movement between tables might have invalidated a lookupNeilBrown1-3/+5
Some users of rhashtables might need to move an object from one table to another - this appears to be the reason for the incomplete usage of NULLS markers. To support these, we store a unique NULLS_MARKER at the end of each chain, and when a search fails to find a match, we check if the NULLS marker found was the expected one. If not, the search may not have examined all objects in the target bucket, so it is repeated. The unique NULLS_MARKER is derived from the address of the head of the chain. As this cannot be derived at load-time the static rhnull in rht_bucket_nested() needs to be initialised at run time. Any caller of a lookup function must still be prepared for the possibility that the object returned is in a different table - it might have been there for some time. Note that this does NOT provide support for other uses of NULLS_MARKERs such as allocating with SLAB_TYPESAFE_BY_RCU or changing the key of an object and re-inserting it in the same table. These could only be done safely if new objects were inserted at the *start* of a hash chain, and that is not currently the case. Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03Merge 4.20-rc5 into driver-core-nextGreg Kroah-Hartman9-92/+151
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-30debugobjects: avoid recursive calls with kmemleakQian Cai1-3/+2
CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to recursive calls. fill_pool kmemleak_ignore make_black_object put_object __call_rcu (kernel/rcu/tree.c) debug_rcu_head_queue debug_object_activate debug_object_init fill_pool kmemleak_ignore make_black_object ... So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly allocated debug objects at all. Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us Signed-off-by: Qian Cai <cai@gmx.us> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30lib/test_kmod.c: fix rmmod double freeLuis Chamberlain1-1/+0
We free the misc device string twice on rmmod; fix this. Without this we cannot remove the module without crashing. Link: http://lkml.kernel.org/r/20181124050500.5257-1-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> [4.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30sbitmap: optimize wakeup checkJens Axboe1-0/+28
Even if we have no waiters on any of the sbitmap_queue wait states, we still have to loop every entry to check. We do this for every IO, so the cost adds up. Shift a bit of the cost to the slow path, when we actually have waiters. Wrap prepare_to_wait_exclusive() and finish_wait(), so we can maintain an internal count of how many are currently active. Then we can simply check this count in sbq_wake_ptr() and not have to loop if we don't have any sleepers. Convert the two users of sbitmap with waiting, blk-mq-tag and iSCSI. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-30sbitmap: ammortize cost of clearing bitsJens Axboe1-8/+73
sbitmap maintains a set of words that we use to set and clear bits, with each bit representing a tag for blk-mq. Even though we spread the bits out and maintain a hint cache, one particular bit allocated will end up being cleared in the exact same spot. This introduces batched clearing of bits. Instead of clearing a given bit, the same bit is set in a cleared/free mask instead. If we fail allocating a bit from a given word, then we check the free mask, and batch move those cleared bits at that time. This trades 64 atomic bitops for 2 cmpxchg(). In a threaded poll test case, half the overhead of getting and clearing tags is removed with this change. On another poll test case with a single thread, performance is unchanged. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-30test_hexdump: use memcpy instead of strncpyLinus Torvalds1-1/+1
New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. Apparently there was a patch for this floating around earlier, but it got lost. Acked-again-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+37
Pull vfs fixes from Al Viro: "Assorted fixes all over the place. The iov_iter one is this cycle regression (splice from UDP triggering WARN_ON()), the rest is older" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Use d_instantiate() rather than d_add() and don't d_drop() afs: Fix missing net error handling afs: Fix validation/callback interaction iov_iter: teach csum_and_copy_to_iter() to handle pipe-backed ones exportfs: do not read dentry after free exportfs: fix 'passing zero to ERR_PTR()' warning aio: fix failure to put the file pointer sysv: return 'err' instead of 0 in __sysv_write_inode
2018-11-30s390: use common bust_spinlocks()Sergey Senozhatsky1-3/+3
s390 is the only architecture that is using own bust_spinlocks() variant, while other arch-s seem to be OK with the common implementation. Heiko Carstens [1] said he would prefer s390 to use the common bust_spinlocks() as well: I did some code archaeology and this function is unchanged since ~17 years. When it was introduced it was close to identical to the x86 variant. All other architectures use the common code variant in the meantime. So if we change this I'd prefer that we switch s390 to the common code variant as well. Right now I can't see a reason for not doing that This patch removes s390 bust_spinlocks() and drops the weak attribute from the common bust_spinlocks() version. [1] lkml.kernel.org/r/20181025062800.GB4037@osiris Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-29sbitmap: don't loop for find_next_zero_bit() for !round_robinJens Axboe1-8/+13
If we aren't forced to do round robin tag allocation, just use the allocation hint to find the index for the tag word, don't use it for the offset inside the word. This avoids a potential extra round trip in the bit looping, and since we're fetching this cacheline, we may as well check the whole word from the start. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-29lib: cordic: Move cordic macros and defines to header filePriit Laes1-16/+7
Now that these macros are in header file, we can eventually clean up the duplicate macros present in the drivers that utilize the same cordic algorithm implementation. Also add CORDIC_ prefix to nonprefixed macros. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-82/+107
Trivial conflict in net/core/filter.c, a locally computed 'sdif' is now an argument to the function. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27iov_iter: reduce code duplicationAl Viro1-27/+27
The same combination of csum_partial_copy_nocheck() with csum_add_block() is used in a bunch of places. Add a helper doing just that and use it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-27percpu-refcount: Replace call_rcu_sched() with call_rcu()Paul E. McKenney1-1/+1
Now that call_rcu()'s callback is not invoked until after all preempt-disable regions of code have completed (in addition to explicitly marked RCU read-side critical sections), call_rcu() can be used in place of call_rcu_sched(). This commit therefore makes that change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org>
2018-11-25iov_iter: teach csum_and_copy_to_iter() to handle pipe-backed onesAl Viro1-1/+37
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-24Merge tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds2-82/+107
Pull XArray updates from Matthew Wilcox: "We found some bugs in the DAX conversion to XArray (and one bug which predated the XArray conversion). There were a couple of bugs in some of the higher-level functions, which aren't actually being called in today's kernel, but surfaced as a result of converting existing radix tree & IDR users over to the XArray. Some of the other changes to how the higher-level APIs work were also motivated by converting various users; again, they're not in use in today's kernel, so changing them has a low probability of introducing a bug. Dan can still trigger a bug in the DAX code with hot-offline/online, and we're working on tracking that down" * tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax: XArray tests: Add missing locking dax: Avoid losing wakeup in dax_lock_mapping_entry dax: Fix huge page faults dax: Fix dax_unlock_mapping_entry for PMD pages dax: Reinstate RCU protection of inode dax: Make sure the unlocking entry isn't locked dax: Remove optimisation from dax_lock_mapping_entry XArray tests: Correct some 64-bit assumptions XArray: Correct xa_store_range XArray: Fix Documentation XArray: Handle NULL pointers differently for allocation XArray: Unify xa_store and __xa_store XArray: Add xa_store_bh() and xa_store_irq() XArray: Turn xa_erase into an exported function XArray: Unify xa_cmpxchg and __xa_cmpxchg XArray: Regularise xa_reserve nilfs2: Use xa_erase_irq XArray: Export __xa_foo to non-GPL modules XArray: Fix xa_for_each with a single element at 0
2018-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
2018-11-22Merge tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-0/+1
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for issues that have been reported. Nothing major, highlights include: - gnss sync write fixes - uio oops fix - nvmem fixes - other minor fixes and some documentation/maintainers updates Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/security-bugs: Postpone fix publication in exceptional cases MAINTAINERS: Add Sasha as a stable branch maintainer gnss: sirf: fix synchronous write timeout gnss: serial: fix synchronous write timeout uio: Fix an Oops on load test_firmware: fix error return getting clobbered nvmem: core: fix regression in of_nvmem_cell_get() misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data drivers/misc/sgi-gru: fix Spectre v1 vulnerability Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up slimbus: ngd: remove unnecessary check
2018-11-20crypto: chacha - add XChaCha12 supportEric Biggers1-3/+3
Now that the generic implementation of ChaCha20 has been refactored to allow varying the number of rounds, add support for XChaCha12, which is the XSalsa construction applied to ChaCha12. ChaCha12 is one of the three ciphers specified by the original ChaCha paper (https://cr.yp.to/chacha/chacha-20080128.pdf: "ChaCha, a variant of Salsa20"), alongside ChaCha8 and ChaCha20. ChaCha12 is faster than ChaCha20 but has a lower, but still large, security margin. We need XChaCha12 support so that it can be used in the Adiantum encryption mode, which enables disk/file encryption on low-end mobile devices where AES-XTS is too slow as the CPUs lack AES instructions. We'd prefer XChaCha20 (the more popular variant), but it's too slow on some of our target devices, so at least in some cases we do need the XChaCha12-based version. In more detail, the problem is that Adiantum is still much slower than we're happy with, and encryption still has a quite noticeable effect on the feel of low-end devices. Users and vendors push back hard against encryption that degrades the user experience, which always risks encryption being disabled entirely. So we need to choose the fastest option that gives us a solid margin of security, and here that's XChaCha12. The best known attack on ChaCha breaks only 7 rounds and has 2^235 time complexity, so ChaCha12's security margin is still better than AES-256's. Much has been learned about cryptanalysis of ARX ciphers since Salsa20 was originally designed in 2005, and it now seems we can be comfortable with a smaller number of rounds. The eSTREAM project also suggests the 12-round version of Salsa20 as providing the best balance among the different variants: combining very good performance with a "comfortable margin of security". Note that it would be trivial to add vanilla ChaCha12 in addition to XChaCha12. However, it's unneeded for now and therefore is omitted. As discussed in the patch that introduced XChaCha20 support, I considered splitting the code into separate chacha-common, chacha20, xchacha20, and xchacha12 modules, so that these algorithms could be enabled/disabled independently. However, since nearly all the code is shared anyway, I ultimately decided there would have been little benefit to the added complexity. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20crypto: chacha20-generic - refactor to allow varying number of roundsEric Biggers2-20/+25
In preparation for adding XChaCha12 support, rename/refactor chacha20-generic to support different numbers of rounds. The justification for needing XChaCha12 support is explained in more detail in the patch "crypto: chacha - add XChaCha12 support". The only difference between ChaCha{8,12,20} are the number of rounds itself; all other parts of the algorithm are the same. Therefore, remove the "20" from all definitions, structures, functions, files, etc. that will be shared by all ChaCha versions. Also make ->setkey() store the round count in the chacha_ctx (previously chacha20_ctx). The generic code then passes the round count through to chacha_block(). There will be a ->setkey() function for each explicitly allowed round count; the encrypt/decrypt functions will be the same. I decided not to do it the opposite way (same ->setkey() function for all round counts, with different encrypt/decrypt functions) because that would have required more boilerplate code in architecture-specific implementations of ChaCha and XChaCha. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20crypto: chacha20-generic - add HChaCha20 library functionEric Biggers1-6/+44
Refactor the unkeyed permutation part of chacha20_block() into its own function, then add hchacha20_block() which is the ChaCha equivalent of HSalsa20 and is an intermediate step towards XChaCha20 (see https://cr.yp.to/snuffle/xsalsa-20081128.pdf). HChaCha20 skips the final addition of the initial state, and outputs only certain words of the state. It should not be used for streaming directly. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+1
2018-11-19XArray tests: Add missing lockingMatthew Wilcox1-0/+10
Lockdep caught me being sloppy in the test suite and failing to lock the XArray appropriately. Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-11-18lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturnArnd Bergmann1-2/+1
gcc-8 complains about the prototype for this function: lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes] This is actually a GCC's bug. In GCC internals __ubsan_handle_builtin_unreachable() declared with both 'noreturn' and 'const' attributes instead of only 'noreturn': https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210 Workaround this by removing the noreturn attribute. [aryabinin: add information about GCC bug in changelog] Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Olof Johansson <olof@lixom.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-16net: remove VLAN_TAG_PRESENTMichał Mirosław1-6/+8
Replace VLAN_TAG_PRESENT with single bit flag and free up VLAN.CFI overload. Now VLAN.CFI is visible in networking stack and can be passed around intact. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16XArray tests: Correct some 64-bit assumptionsMatthew Wilcox1-2/+2
The test-suite caught these two mistakes when compiled for 32-bit. I had only been running the test-suite in 64-bit mode. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-11-16XArray: Correct xa_store_rangeMatthew Wilcox1-2/+3
The explicit '64' should have been BITS_PER_LONG, but while looking at this code I realised I meant to use __ffs(), not ilog2(). Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-11-15test_objagg: Fix warning.David S. Miller1-0/+1
lib/test_objagg.c: In function ‘test_delta_action_item’: ./include/linux/printk.h:308:2: warning: ‘errmsg’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15lib: introduce initial implementation of object aggregation managerJiri Pirko5-0/+1351
This lib tracks objects which could be of two types: 1) root object 2) nested object - with a "delta" which differentiates it from the associated root object The objects are tracked by a hashtable and reference-counted. User is responsible of implementing callbacks to create/destroy root entity related to each root object and callback to create/destroy nested object delta. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14Merge tag 'gnss-4.20-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss into char-misc-linusGreg Kroah-Hartman1-2/+2
Johan writes: GNSS fixes for v4.20-rc3 The two serdev drivers were using the wrong timeout argument when expecting the serdev_device_write() helper to wait indefinitely, something which could result in incomplete writes when the controller write buffer was getting full. Signed-off-by: Johan Hovold <johan@kernel.org>
2018-11-12lib/gcd: Remove use of CPU_NO_EFFICIENT_FFS macroPaul Burton1-1/+1
The CPU_NO_EFFICIENT_FFS pre-processor macro is no longer used, with all architectures toggling the equivalent Kconfig symbol CONFIG_CPU_NO_EFFICIENT_FFS instead. Remove our check for the unused macro. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21046/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
2018-11-11kobject: Fix warnings in lib/kobject_uevent.cBo YU1-0/+2
Add a blank after declaration. Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11kobject: drop unnecessary cast "%llu" for u64Bo YU1-1/+1
There is no searon for u64 var cast to unsigned long long type. Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11test_firmware: fix error return getting clobberedColin Ian King1-0/+1
In the case where eq->fw->size > PAGE_SIZE the error return rc is being set to EINVAL however this is being overwritten to rc = req->fw->size because the error exit path via label 'out' is not being taken. Fix this by adding the jump to the error exit path 'out'. Detected by CoverityScan, CID#1453465 ("Unused value") Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-06lib/raid6: Fix arm64 test buildJeremy Linton1-2/+2
The lib/raid6/test fails to build the neon objects on arm64 because the correct machine type is 'aarch64'. Once this is correctly enabled, the neon recovery objects need to be added to the build. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.