| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
__alloc_pages_slowpath has traditionally relied on the direct reclaim
and did_some_progress as an indicator that it makes sense to retry
allocation rather than declaring OOM. shrink_zones had to rely on
zone_reclaimable if shrink_zone didn't make any progress to prevent from
a premature OOM killer invocation - the LRU might be full of dirty or
writeback pages and direct reclaim cannot clean those up.
zone_reclaimable allows to rescan the reclaimable lists several times
and restart if a page is freed. This is really subtle behavior and it
might lead to a livelock when a single freed page keeps allocator
looping but the current task will not be able to allocate that single
page. OOM killer would be more appropriate than looping without any
progress for unbounded amount of time.
This patch changes OOM detection logic and pulls it out from shrink_zone
which is too low to be appropriate for any high level decisions such as
OOM which is per zonelist property. It is __alloc_pages_slowpath which
knows how many attempts have been done and what was the progress so far
therefore it is more appropriate to implement this logic.
The new heuristic is implemented in should_reclaim_retry helper called
from __alloc_pages_slowpath. It tries to be more deterministic and
easier to follow. It builds on an assumption that retrying makes sense
only if the currently reclaimable memory + free pages would allow the
current allocation request to succeed (as per __zone_watermark_ok) at
least for one zone in the usable zonelist.
This alone wouldn't be sufficient, though, because the writeback might
get stuck and reclaimable pages might be pinned for a really long time
or even depend on the current allocation context. Therefore there is a
backoff mechanism implemented which reduces the reclaim target after
each reclaim round without any progress. This means that we should
eventually converge to only NR_FREE_PAGES as the target and fail on the
wmark check and proceed to OOM. The backoff is simple and linear with
1/16 of the reclaimable pages for each round without any progress. We
are optimistic and reset counter for successful reclaim rounds.
Costly high order pages mostly preserve their semantic and those without
__GFP_REPEAT fail right away while those which have the flag set will
back off after the amount of reclaimable pages reaches equivalent of the
requested order. The only difference is that if there was no progress
during the reclaim we rely on zone watermark check. This is more
logical thing to do than previous 1<<order attempts which were a result
of zone_reclaimable faking the progress.
[vdavydov@virtuozzo.com: check classzone_idx for shrink_zone]
[hannes@cmpxchg.org: separate the heuristic into should_reclaim_retry]
[rientjes@google.com: use zone_page_state_snapshot for NR_FREE_PAGES]
[rientjes@google.com: shrink_zones doesn't need to return anything]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Compaction can provide a wild variation of feedback to the caller. Many
of them are implementation specific and the caller of the compaction
(especially the page allocator) shouldn't be bound to specifics of the
current implementation.
This patch abstracts the feedback into three basic types:
- compaction_made_progress - compaction was active and made some
progress.
- compaction_failed - compaction failed and further attempts to
invoke it would most probably fail and therefore it is not
worth retrying
- compaction_withdrawn - compaction wasn't invoked for an
implementation specific reasons. In the current implementation
it means that the compaction was deferred, contended or the
page scanners met too early without any progress. Retrying is
still worthwhile.
[vbabka@suse.cz: do not change thp back off behavior]
[akpm@linux-foundation.org: fix typo in comment, per Hillf]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__alloc_pages_direct_compact communicates potential back off by two
variables:
- deferred_compaction tells that the compaction returned
COMPACT_DEFERRED
- contended_compaction is set when there is a contention on
zone->lock resp. zone->lru_lock locks
__alloc_pages_slowpath then backs of for THP allocation requests to
prevent from long stalls. This is rather messy and it would be much
cleaner to return a single compact result value and hide all the nasty
details into __alloc_pages_direct_compact.
This patch shouldn't introduce any functional changes.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
compaction_result will be used as the primary feedback channel for
compaction users. At the same time try_to_compact_pages (and
potentially others) assume a certain ordering where a more specific
feedback takes precendence.
This gets a bit awkward when we have conflicting feedback from different
zones. E.g one returing COMPACT_COMPLETE meaning the full zone has been
scanned without any outcome while other returns with COMPACT_PARTIAL aka
made some progress. The caller should get COMPACT_PARTIAL because that
means that the compaction still can make some progress. The same
applies for COMPACT_PARTIAL vs COMPACT_PARTIAL_SKIPPED.
Reorder PARTIAL to be the largest one so the larger the value is the
more progress we have done.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
COMPACT_COMPLETE now means that compaction and free scanner met. This
is not very useful information if somebody just wants to use this
feedback and make any decisions based on that. The current caller might
be a poor guy who just happened to scan tiny portion of the zone and
that could be the reason no suitable pages were compacted. Make sure we
distinguish the full and partial zone walks.
Consumers should treat COMPACT_PARTIAL_SKIPPED as a potential success
and be optimistic in retrying.
The existing users of COMPACT_COMPLETE are conservatively changed to use
COMPACT_PARTIAL_SKIPPED as well but some of them should be probably
reconsidered and only defer the compaction only for COMPACT_COMPLETE
with the new semantic.
This patch shouldn't introduce any functional changes.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
try_to_compact_pages() can currently return COMPACT_SKIPPED even when
the compaction is defered for some zone just because zone DMA is skipped
in 99% of cases due to watermark checks. This makes COMPACT_DEFERRED
basically unusable for the page allocator as a feedback mechanism.
Make sure we distinguish those two states properly and switch their
ordering in the enum. This would mean that the COMPACT_SKIPPED will be
returned only when all eligible zones are skipped.
As a result COMPACT_DEFERRED handling for THP in __alloc_pages_slowpath
will be more precise and we would bail out rather than reclaim.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The compiler is complaining after "mm, compaction: change COMPACT_
constants into enum"
mm/compaction.c: In function `compact_zone':
mm/compaction.c:1350:2: warning: enumeration value `COMPACT_DEFERRED' not handled in switch [-Wswitch]
switch (ret) {
^
mm/compaction.c:1350:2: warning: enumeration value `COMPACT_COMPLETE' not handled in switch [-Wswitch]
mm/compaction.c:1350:2: warning: enumeration value `COMPACT_NO_SUITABLE_PAGE' not handled in switch [-Wswitch]
mm/compaction.c:1350:2: warning: enumeration value `COMPACT_NOT_SUITABLE_ZONE' not handled in switch [-Wswitch]
mm/compaction.c:1350:2: warning: enumeration value `COMPACT_CONTENDED' not handled in switch [-Wswitch]
compaction_suitable is allowed to return only COMPACT_PARTIAL,
COMPACT_SKIPPED and COMPACT_CONTINUE so other cases are simply
impossible. Put a VM_BUG_ON to catch an impossible return value.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Compaction code is doing weird dances between COMPACT_FOO -> int ->
unsigned long
But there doesn't seem to be any reason for that. All functions which
return/use one of those constants are not expecting any other value so it
really makes sense to define an enum for them and make it clear that no
other values are expected.
This is a pure cleanup and shouldn't introduce any functional changes.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Motivation:
As pointed out by Linus [2][3] relying on zone_reclaimable as a way to
communicate the reclaim progress is rater dubious. I tend to agree,
not only it is really obscure, it is not hard to imagine cases where a
single page freed in the loop keeps all the reclaimers looping without
getting any progress because their gfp_mask wouldn't allow to get that
page anyway (e.g. single GFP_ATOMIC alloc and free loop). This is rather
rare so it doesn't happen in the practice but the current logic which we
have is rather obscure and hard to follow a also non-deterministic.
This is an attempt to make the OOM detection more deterministic and
easier to follow because each reclaimer basically tracks its own
progress which is implemented at the page allocator layer rather spread
out between the allocator and the reclaim. The more on the
implementation is described in the first patch.
I have tested several different scenarios but it should be clear that
testing OOM killer is quite hard to be representative. There is usually
a tiny gap between almost OOM and full blown OOM which is often time
sensitive. Anyway, I have tested the following 2 scenarios and I would
appreciate if there are more to test.
Testing environment: a virtual machine with 2G of RAM and 2CPUs without
any swap to make the OOM more deterministic.
1) 2 writers (each doing dd with 4M blocks to an xfs partition with 1G
file size, removes the files and starts over again) running in
parallel for 10s to build up a lot of dirty pages when 100 parallel
mem_eaters (anon private populated mmap which waits until it gets
signal) with 80M each.
This causes an OOM flood of course and I have compared both patched
and unpatched kernels. The test is considered finished after there
are no OOM conditions detected. This should tell us whether there are
any excessive kills or some of them premature (e.g. due to dirty pages):
I have performed two runs this time each after a fresh boot.
* base kernel
$ grep "Out of memory:" base-oom-run1.log | wc -l
78
$ grep "Out of memory:" base-oom-run2.log | wc -l
78
$ grep "Kill process" base-oom-run1.log | tail -n1
[ 91.391203] Out of memory: Kill process 3061 (mem_eater) score 39 or sacrifice child
$ grep "Kill process" base-oom-run2.log | tail -n1
[ 82.141919] Out of memory: Kill process 3086 (mem_eater) score 39 or sacrifice child
$ grep "DMA32 free:" base-oom-run1.log | sed 's@.*free:\([0-9]*\)kB.*@\1@' | calc_min_max.awk
min: 5376.00 max: 6776.00 avg: 5530.75 std: 166.50 nr: 61
$ grep "DMA32 free:" base-oom-run2.log | sed 's@.*free:\([0-9]*\)kB.*@\1@' | calc_min_max.awk
min: 5416.00 max: 5608.00 avg: 5514.15 std: 42.94 nr: 52
$ grep "DMA32.*all_unreclaimable? no" base-oom-run1.log | wc -l
1
$ grep "DMA32.*all_unreclaimable? no" base-oom-run2.log | wc -l
3
* patched kernel
$ grep "Out of memory:" patched-oom-run1.log | wc -l
78
miso@tiehlicka /mnt/share/devel/miso/kvm $ grep "Out of memory:" patched-oom-run2.log | wc -l
77
e grep "Kill process" patched-oom-run1.log | tail -n1
[ 497.317732] Out of memory: Kill process 3108 (mem_eater) score 39 or sacrifice child
$ grep "Kill process" patched-oom-run2.log | tail -n1
[ 316.169920] Out of memory: Kill process 3093 (mem_eater) score 39 or sacrifice child
$ grep "DMA32 free:" patched-oom-run1.log | sed 's@.*free:\([0-9]*\)kB.*@\1@' | calc_min_max.awk
min: 5420.00 max: 5808.00 avg: 5513.90 std: 60.45 nr: 78
$ grep "DMA32 free:" patched-oom-run2.log | sed 's@.*free:\([0-9]*\)kB.*@\1@' | calc_min_max.awk
min: 5380.00 max: 6384.00 avg: 5520.94 std: 136.84 nr: 77
e grep "DMA32.*all_unreclaimable? no" patched-oom-run1.log | wc -l
2
$ grep "DMA32.*all_unreclaimable? no" patched-oom-run2.log | wc -l
3
The patched kernel run noticeably longer while invoking OOM killer same
number of times. This means that the original implementation is much
more aggressive and triggers the OOM killer sooner. free pages stats
show that neither kernels went OOM too early most of the time, though. I
guess the difference is in the backoff when retries without any progress
do sleep for a while if there is memory under writeback or dirty which
is highly likely considering the parallel IO.
Both kernels have seen races where zone wasn't marked unreclaimable
and we still hit the OOM killer. This is most likely a race where
a task managed to exit between the last allocation attempt and the oom
killer invocation.
2) 2 writers again with 10s of run and then 10 mem_eaters to consume as much
memory as possible without triggering the OOM killer. This required a lot
of tuning but I've considered 3 consecutive runs in three different boots
without OOM as a success.
* base kernel
size=$(awk '/MemFree/{printf "%dK", ($2/10)-(16*1024)}' /proc/meminfo)
* patched kernel
size=$(awk '/MemFree/{printf "%dK", ($2/10)-(12*1024)}' /proc/meminfo)
That means 40M more memory was usable without triggering OOM killer. The
base kernel sometimes managed to handle the same as patched but it
wasn't consistent and failed in at least on of the 3 runs. This seems
like a minor improvement.
I was testing also GPF_REPEAT costly requests (hughetlb) with fragmented
memory and under memory pressure. The results are in patch 11 where the
logic is implemented. In short I can see huge improvement there.
I am certainly interested in other usecases as well as well as any
feedback. Especially those which require higher order requests.
This patch (of 14):
While playing with the oom detection rework [1] I have noticed that my
heavy order-9 (hugetlb) load close to OOM ended up in an endless loop
where the reclaim hasn't made any progress but did_some_progress didn't
reflect that and compaction_suitable was backing off because no zone is
above low wmark + 1 << order.
It turned out that this is in fact an old standing bug in
compaction_ready which ignores the requested_highidx and did the
watermark check for 0 classzone_idx. This succeeds for zone DMA most
of the time as the zone is mostly unused because of lowmem protection.
As a result costly high order allocatios always report a successfull
progress even when there was none. This wasn't a problem so far
because these allocations usually fail quite early or retry only few
times with __GFP_REPEAT but this will change after later patch in this
series so make sure to not lie about the progress and propagate
requested_highidx down to compaction_ready and use it for both the
watermak check and compaction_suitable to fix this issue.
[1] http://lkml.kernel.org/r/1459855533-4600-1-git-send-email-mhocko@kernel.org
[2] https://lkml.org/lkml/2015/10/12/808
[3] https://lkml.org/lkml/2015/10/13/597
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The inactive file list should still be large enough to contain readahead
windows and freshly written file data, but it no longer is the only
source for detecting multiple accesses to file pages. The workingset
refault measurement code causes recently evicted file pages that get
accessed again after a shorter interval to be promoted directly to the
active list.
With that mechanism in place, we can afford to (on a larger system)
dedicate more memory to the active file list, so we can actually cache
more of the frequently used file pages in memory, and not have them
pushed out by streaming writes, once-used streaming file reads, etc.
This can help things like database workloads, where only half the page
cache can currently be used to cache the database working set. This
patch automatically increases that fraction on larger systems, using the
same ratio that has already been used for anonymous memory.
[hannes@cmpxchg.org: cgroup-awareness]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Andres observed that his database workload is struggling with the
transaction journal creating pressure on frequently read pages.
Access patterns like transaction journals frequently write the same
pages over and over, but in the majority of cases those pages are never
read back. There are no caching benefits to be had for those pages, so
activating them and having them put pressure on pages that do benefit
from caching is a bad choice.
Leave page activations to read accesses and don't promote pages based on
writes alone.
It could be said that partially written pages do contain cache-worthy
data, because even if *userspace* does not access the unwritten part,
the kernel still has to read it from the filesystem for correctness.
However, a counter argument is that these pages enjoy at least *some*
protection over other inactive file pages through the writeback cache,
in the sense that dirty pages are written back with a delay and cache
reclaim leaves them alone until they have been written back to disk.
Should that turn out to be insufficient and we see increased read IO
from partial writes under memory pressure, we can always go back and
update grab_cache_page_write_begin() to take (pos, len) so that it can
tell partial writes from pages that don't need partial reads. But for
now, keep it simple.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Andres Freund <andres@anarazel.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a follow-up to
http://www.spinics.net/lists/linux-mm/msg101739.html
where Andres reported his database workingset being pushed out by the
minimum size enforcement of the inactive file list - currently 50% of
cache - as well as repeatedly written file pages that are never actually
read.
Two changes fell out of the discussions. The first change observes that
pages that are only ever written don't benefit from caching beyond what
the writeback cache does for partial page writes, and so we shouldn't
promote them to the active file list where they compete with pages whose
cached data is actually accessed repeatedly. This change comes in two
patches - one for in-cache write accesses and one for refaults triggered
by writes, neither of which should promote a cache page.
Second, with the refault detection we don't need to set 50% of the cache
aside for used-once cache anymore since we can detect frequently used
pages even when they are evicted between accesses. We can allow the
active list to be bigger and thus protect a bigger workingset that isn't
challenged by streamers. Depending on the access patterns, this can
increase major faults during workingset transitions for better
performance during stable phases.
This patch (of 3):
When rewriting a page, the data in that page is replaced with new data.
This means that evicting something else from the active file list, in
order to cache data that will be replaced by something else, is likely
to be a waste of memory.
It is better to save the active list for frequently read pages, because
reads actually use the data that is in the page.
This patch ignores partial writes, because it is unclear whether the
complexity of identifying those is worth any potential performance gain
obtained from better caching pages that see repeated partial writes at
large enough intervals to not get caught by the use-twice promotion code
used for the inactive file list.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The newly added nps irqchip driver causes build warnings on ARM64.
include/soc/nps/common.h: In function 'nps_host_reg_non_cl':
include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
As the driver is only used on ARC, we don't need to see it without
COMPILE_TEST elsewhere, and we can avoid the warnings by only building
on 32-bit architectures even with CONFIG_COMPILE_TEST.
Acked-by: Marc Zyngier <narc.zyngier@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The page allocator fast path uses either the requested nodemask or
cpuset_current_mems_allowed if cpusets are enabled. If the allocation
context allows watermarks to be ignored then it can also ignore memory
policies. However, on entering the allocator slowpath the nodemask may
still be cpuset_current_mems_allowed and the policies are enforced.
This patch resets the nodemask appropriately before entering the
slowpath.
Link: http://lkml.kernel.org/r/20160504143628.GU2858@techsingularity.net
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Bad pages should be rare so the code handling them doesn't need to be
inline for performance reasons. Put it to separate function which
returns void. This also assumes that the initial page_expected_state()
result will match the result of the thorough check, i.e. the page
doesn't become "good" in the meanwhile. This matches the same
expectations already in place in free_pages_check().
!DEBUG_VM bloat-o-meter:
add/remove: 1/0 grow/shrink: 0/1 up/down: 134/-274 (-140)
function old new delta
check_new_page_bad - 134 +134
get_page_from_freelist 3468 3194 -274
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The new free_pcp_prepare() function shares a lot of code with
free_pages_prepare(), which makes this a maintenance risk when some
future patch modifies only one of them. We should be able to achieve
the same effect (skipping free_pages_check() from !DEBUG_VM configs) by
adding a parameter to free_pages_prepare() and making it inline, so the
checks (and the order != 0 parts) are eliminated from the call from
free_pcp_prepare().
!DEBUG_VM: bloat-o-meter reports no difference, as my gcc was already
inlining free_pages_prepare() and the elimination seems to work as
expected
DEBUG_VM bloat-o-meter:
add/remove: 0/1 grow/shrink: 2/0 up/down: 1035/-778 (257)
function old new delta
__free_pages_ok 297 1060 +763
free_hot_cold_page 480 752 +272
free_pages_prepare 778 - -778
Here inlining didn't occur before, and added some code, but it's ok for
a debug option.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Every page allocated checks a number of page fields for validity. This
catches corruption bugs of pages that are already freed but it is
expensive. This patch weakens the debugging check by checking PCP pages
only when the PCP lists are being refilled. All compound pages are
checked. This potentially avoids debugging checks entirely if the PCP
lists are never emptied and refilled so some corruption issues may be
missed. Full checking requires DEBUG_VM.
With the two deferred debugging patches applied, the impact to a page
allocator microbenchmark is
4.6.0-rc3 4.6.0-rc3
inline-v3r6 deferalloc-v3r7
Min alloc-odr0-1 344.00 ( 0.00%) 317.00 ( 7.85%)
Min alloc-odr0-2 248.00 ( 0.00%) 231.00 ( 6.85%)
Min alloc-odr0-4 209.00 ( 0.00%) 192.00 ( 8.13%)
Min alloc-odr0-8 181.00 ( 0.00%) 166.00 ( 8.29%)
Min alloc-odr0-16 168.00 ( 0.00%) 154.00 ( 8.33%)
Min alloc-odr0-32 161.00 ( 0.00%) 148.00 ( 8.07%)
Min alloc-odr0-64 158.00 ( 0.00%) 145.00 ( 8.23%)
Min alloc-odr0-128 156.00 ( 0.00%) 143.00 ( 8.33%)
Min alloc-odr0-256 168.00 ( 0.00%) 154.00 ( 8.33%)
Min alloc-odr0-512 178.00 ( 0.00%) 167.00 ( 6.18%)
Min alloc-odr0-1024 186.00 ( 0.00%) 174.00 ( 6.45%)
Min alloc-odr0-2048 192.00 ( 0.00%) 180.00 ( 6.25%)
Min alloc-odr0-4096 198.00 ( 0.00%) 184.00 ( 7.07%)
Min alloc-odr0-8192 200.00 ( 0.00%) 188.00 ( 6.00%)
Min alloc-odr0-16384 201.00 ( 0.00%) 188.00 ( 6.47%)
Min free-odr0-1 189.00 ( 0.00%) 180.00 ( 4.76%)
Min free-odr0-2 132.00 ( 0.00%) 126.00 ( 4.55%)
Min free-odr0-4 104.00 ( 0.00%) 99.00 ( 4.81%)
Min free-odr0-8 90.00 ( 0.00%) 85.00 ( 5.56%)
Min free-odr0-16 84.00 ( 0.00%) 80.00 ( 4.76%)
Min free-odr0-32 80.00 ( 0.00%) 76.00 ( 5.00%)
Min free-odr0-64 78.00 ( 0.00%) 74.00 ( 5.13%)
Min free-odr0-128 77.00 ( 0.00%) 73.00 ( 5.19%)
Min free-odr0-256 94.00 ( 0.00%) 91.00 ( 3.19%)
Min free-odr0-512 108.00 ( 0.00%) 112.00 ( -3.70%)
Min free-odr0-1024 115.00 ( 0.00%) 118.00 ( -2.61%)
Min free-odr0-2048 120.00 ( 0.00%) 125.00 ( -4.17%)
Min free-odr0-4096 123.00 ( 0.00%) 129.00 ( -4.88%)
Min free-odr0-8192 126.00 ( 0.00%) 130.00 ( -3.17%)
Min free-odr0-16384 126.00 ( 0.00%) 131.00 ( -3.97%)
Note that the free paths for large numbers of pages is impacted as the
debugging cost gets shifted into that path when the page data is no
longer necessarily cache-hot.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Every page free checks a number of page fields for validity. This
catches premature frees and corruptions but it is also expensive. This
patch weakens the debugging check by checking PCP pages at the time they
are drained from the PCP list. This will trigger the bug but the site
that freed the corrupt page will be lost. To get the full context, a
kernel rebuild with DEBUG_VM is necessary.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
An important function for cpusets is cpuset_node_allowed(), which
optimizes on the fact if there's a single root CPU set, it must be
trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the
cpusets_enabled_key static key the right way where static keys eliminate
branching overhead with jump labels.
This patch converts it so that static key is used properly. It's also
switched to the new static key API and the checking functions are
converted to return bool instead of int. We also provide a new variant
__cpuset_zone_allowed() which expects that the static key check was
already done and they key was enabled. This is needed for
get_page_from_freelist() where we want to also avoid the relatively
slower check when ALLOC_CPUSET is not set in alloc_flags.
The impact on the page allocator microbenchmark is less than expected
but the cleanup in itself is worthwhile.
4.6.0-rc2 4.6.0-rc2
multcheck-v1r20 cpuset-v1r20
Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%)
Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%)
Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%)
Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%)
Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%)
Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%)
Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%)
Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%)
Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%)
Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%)
Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%)
Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%)
Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%)
Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%)
Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%)
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Zefan Li <lizefan@huawei.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The function call overhead of get_pfnblock_flags_mask() is measurable in
the page free paths. This patch uses an inlined version that is faster.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The original count is never reused so it can be removed.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Check without side-effects should be easier to maintain. It also
removes the duplicated cpupid and flags reset done in !DEBUG_VM variant
of both free_pcp_prepare() and then bulkfree_pcp_prepare(). Finally, it
enables the next patch.
It shouldn't result in new branches, thanks to inlining of the check.
!DEBUG_VM bloat-o-meter:
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-27 (-27)
function old new delta
__free_pages_ok 748 739 -9
free_pcppages_bulk 1403 1385 -18
DEBUG_VM:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-28 (-28)
function old new delta
free_pages_prepare 806 778 -28
This is also slightly faster because cpupid information is not set on
tail pages so we can avoid resets there.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
From: Vlastimil Babka <vbabka@suse.cz>
!DEBUG_VM size and bloat-o-meter:
add/remove: 1/0 grow/shrink: 0/2 up/down: 124/-370 (-246)
function old new delta
free_pages_check_bad - 124 +124
free_pcppages_bulk 1288 1171 -117
__free_pages_ok 948 695 -253
DEBUG_VM:
add/remove: 1/0 grow/shrink: 0/1 up/down: 124/-214 (-90)
function old new delta
free_pages_check_bad - 124 +124
free_pages_prepare 1112 898 -214
[akpm@linux-foundation.org: fix whitespace]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Every page allocated or freed is checked for sanity to avoid corruptions
that are difficult to detect later. A bad page could be due to a number
of fields. Instead of using multiple branches, this patch combines
multiple fields into a single branch. A detailed check is only
necessary if that check fails.
4.6.0-rc2 4.6.0-rc2
initonce-v1r20 multcheck-v1r20
Min alloc-odr0-1 359.00 ( 0.00%) 348.00 ( 3.06%)
Min alloc-odr0-2 260.00 ( 0.00%) 254.00 ( 2.31%)
Min alloc-odr0-4 214.00 ( 0.00%) 213.00 ( 0.47%)
Min alloc-odr0-8 186.00 ( 0.00%) 186.00 ( 0.00%)
Min alloc-odr0-16 173.00 ( 0.00%) 173.00 ( 0.00%)
Min alloc-odr0-32 165.00 ( 0.00%) 166.00 ( -0.61%)
Min alloc-odr0-64 162.00 ( 0.00%) 162.00 ( 0.00%)
Min alloc-odr0-128 161.00 ( 0.00%) 160.00 ( 0.62%)
Min alloc-odr0-256 170.00 ( 0.00%) 169.00 ( 0.59%)
Min alloc-odr0-512 181.00 ( 0.00%) 180.00 ( 0.55%)
Min alloc-odr0-1024 190.00 ( 0.00%) 188.00 ( 1.05%)
Min alloc-odr0-2048 196.00 ( 0.00%) 194.00 ( 1.02%)
Min alloc-odr0-4096 202.00 ( 0.00%) 199.00 ( 1.49%)
Min alloc-odr0-8192 205.00 ( 0.00%) 202.00 ( 1.46%)
Min alloc-odr0-16384 205.00 ( 0.00%) 203.00 ( 0.98%)
Again, the benefit is marginal but avoiding excessive branches is
important. Ideally the paths would not have to check these conditions
at all but regrettably abandoning the tests would make use-after-free
bugs much harder to detect.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The classzone_idx can be inferred from preferred_zoneref so remove the
unnecessary field and save stack space.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The allocator fast path looks up the first usable zone in a zonelist and
then get_page_from_freelist does the same job in the zonelist iterator.
This patch preserves the necessary information.
4.6.0-rc2 4.6.0-rc2
fastmark-v1r20 initonce-v1r20
Min alloc-odr0-1 364.00 ( 0.00%) 359.00 ( 1.37%)
Min alloc-odr0-2 262.00 ( 0.00%) 260.00 ( 0.76%)
Min alloc-odr0-4 214.00 ( 0.00%) 214.00 ( 0.00%)
Min alloc-odr0-8 186.00 ( 0.00%) 186.00 ( 0.00%)
Min alloc-odr0-16 173.00 ( 0.00%) 173.00 ( 0.00%)
Min alloc-odr0-32 165.00 ( 0.00%) 165.00 ( 0.00%)
Min alloc-odr0-64 161.00 ( 0.00%) 162.00 ( -0.62%)
Min alloc-odr0-128 159.00 ( 0.00%) 161.00 ( -1.26%)
Min alloc-odr0-256 168.00 ( 0.00%) 170.00 ( -1.19%)
Min alloc-odr0-512 180.00 ( 0.00%) 181.00 ( -0.56%)
Min alloc-odr0-1024 190.00 ( 0.00%) 190.00 ( 0.00%)
Min alloc-odr0-2048 196.00 ( 0.00%) 196.00 ( 0.00%)
Min alloc-odr0-4096 202.00 ( 0.00%) 202.00 ( 0.00%)
Min alloc-odr0-8192 206.00 ( 0.00%) 205.00 ( 0.49%)
Min alloc-odr0-16384 206.00 ( 0.00%) 205.00 ( 0.49%)
The benefit is negligible and the results are within the noise but each
cycle counts.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Watermarks have to be checked on every allocation including the number
of pages being allocated and whether reserves can be accessed. The
reserves only matter if memory is limited and the free_pages adjustment
only applies to high-order pages. This patch adds a shortcut for
order-0 pages that avoids numerous calculations if there is plenty of
free memory yielding the following performance difference in a page
allocator microbenchmark;
4.6.0-rc2 4.6.0-rc2
optfair-v1r20 fastmark-v1r20
Min alloc-odr0-1 380.00 ( 0.00%) 364.00 ( 4.21%)
Min alloc-odr0-2 273.00 ( 0.00%) 262.00 ( 4.03%)
Min alloc-odr0-4 227.00 ( 0.00%) 214.00 ( 5.73%)
Min alloc-odr0-8 196.00 ( 0.00%) 186.00 ( 5.10%)
Min alloc-odr0-16 183.00 ( 0.00%) 173.00 ( 5.46%)
Min alloc-odr0-32 173.00 ( 0.00%) 165.00 ( 4.62%)
Min alloc-odr0-64 169.00 ( 0.00%) 161.00 ( 4.73%)
Min alloc-odr0-128 169.00 ( 0.00%) 159.00 ( 5.92%)
Min alloc-odr0-256 180.00 ( 0.00%) 168.00 ( 6.67%)
Min alloc-odr0-512 190.00 ( 0.00%) 180.00 ( 5.26%)
Min alloc-odr0-1024 198.00 ( 0.00%) 190.00 ( 4.04%)
Min alloc-odr0-2048 204.00 ( 0.00%) 196.00 ( 3.92%)
Min alloc-odr0-4096 209.00 ( 0.00%) 202.00 ( 3.35%)
Min alloc-odr0-8192 213.00 ( 0.00%) 206.00 ( 3.29%)
Min alloc-odr0-16384 214.00 ( 0.00%) 206.00 ( 3.74%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The fair zone allocation policy is not without cost but it can be
reduced slightly. This patch removes an unnecessary local variable,
checks the likely conditions of the fair zone policy first, uses a bool
instead of a flags check and falls through when a remote node is
encountered instead of doing a full restart. The benefit is marginal
but it's there
4.6.0-rc2 4.6.0-rc2
decstat-v1r20 optfair-v1r20
Min alloc-odr0-1 377.00 ( 0.00%) 380.00 ( -0.80%)
Min alloc-odr0-2 273.00 ( 0.00%) 273.00 ( 0.00%)
Min alloc-odr0-4 226.00 ( 0.00%) 227.00 ( -0.44%)
Min alloc-odr0-8 196.00 ( 0.00%) 196.00 ( 0.00%)
Min alloc-odr0-16 183.00 ( 0.00%) 183.00 ( 0.00%)
Min alloc-odr0-32 175.00 ( 0.00%) 173.00 ( 1.14%)
Min alloc-odr0-64 172.00 ( 0.00%) 169.00 ( 1.74%)
Min alloc-odr0-128 170.00 ( 0.00%) 169.00 ( 0.59%)
Min alloc-odr0-256 183.00 ( 0.00%) 180.00 ( 1.64%)
Min alloc-odr0-512 191.00 ( 0.00%) 190.00 ( 0.52%)
Min alloc-odr0-1024 199.00 ( 0.00%) 198.00 ( 0.50%)
Min alloc-odr0-2048 204.00 ( 0.00%) 204.00 ( 0.00%)
Min alloc-odr0-4096 210.00 ( 0.00%) 209.00 ( 0.48%)
Min alloc-odr0-8192 213.00 ( 0.00%) 213.00 ( 0.00%)
Min alloc-odr0-16384 214.00 ( 0.00%) 214.00 ( 0.00%)
The benefit is marginal at best but one of the most important benefits,
avoiding a second search when falling back to another node is not
triggered by this particular test so the benefit for some corner cases
is understated.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The page allocator fast path checks page multiple times unnecessarily.
This patch avoids all the slowpath checks if the first allocation
attempt succeeds.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When bulk freeing pages from the per-cpu lists the zone is checked for
isolated pageblocks on every release. This patch checks it once per
drain.
[mgorman@techsingularity.net: fix locking radce, per Vlastimil]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__GFP_HARDWALL only has meaning in the context of cpusets but the fast
path always applies the flag on the first attempt. Move the
manipulations into the cpuset paths where they will be masked by a
static branch in the common case.
With the other micro-optimisations in this series combined, the impact
on a page allocator microbenchmark is
4.6.0-rc2 4.6.0-rc2
decstat-v1r20 micro-v1r20
Min alloc-odr0-1 381.00 ( 0.00%) 377.00 ( 1.05%)
Min alloc-odr0-2 275.00 ( 0.00%) 273.00 ( 0.73%)
Min alloc-odr0-4 229.00 ( 0.00%) 226.00 ( 1.31%)
Min alloc-odr0-8 199.00 ( 0.00%) 196.00 ( 1.51%)
Min alloc-odr0-16 186.00 ( 0.00%) 183.00 ( 1.61%)
Min alloc-odr0-32 179.00 ( 0.00%) 175.00 ( 2.23%)
Min alloc-odr0-64 174.00 ( 0.00%) 172.00 ( 1.15%)
Min alloc-odr0-128 172.00 ( 0.00%) 170.00 ( 1.16%)
Min alloc-odr0-256 181.00 ( 0.00%) 183.00 ( -1.10%)
Min alloc-odr0-512 193.00 ( 0.00%) 191.00 ( 1.04%)
Min alloc-odr0-1024 201.00 ( 0.00%) 199.00 ( 1.00%)
Min alloc-odr0-2048 206.00 ( 0.00%) 204.00 ( 0.97%)
Min alloc-odr0-4096 212.00 ( 0.00%) 210.00 ( 0.94%)
Min alloc-odr0-8192 215.00 ( 0.00%) 213.00 ( 0.93%)
Min alloc-odr0-16384 216.00 ( 0.00%) 214.00 ( 0.93%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The current reset unnecessarily clears flags and makes pointless
calculations.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page is guaranteed to be set before it is read with or without the
initialisation.
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
zonelist here is a copy of a struct field that is used once. Ditch it.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The number of zones skipped to a zone expiring its fair zone allocation
quota is irrelevant. Convert to bool.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
alloc_flags is a bitmask of flags but it is signed which does not
necessarily generate the best code depending on the compiler. Even
without an impact, it makes more sense that this be unsigned.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pageblocks have an associated bitmap to store migrate types and whether
the pageblock should be skipped during compaction. The bitmap may be
associated with a memory section or a zone but the zone is looked up
unconditionally. The compiler should optimise this away automatically
so this is a cosmetic patch only in many cases.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__dec_zone_state is cheaper to use for removing an order-0 page as it
has fewer conditions to check.
The performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
optiter-v1r20 decstat-v1r20
Min alloc-odr0-1 382.00 ( 0.00%) 381.00 ( 0.26%)
Min alloc-odr0-2 282.00 ( 0.00%) 275.00 ( 2.48%)
Min alloc-odr0-4 233.00 ( 0.00%) 229.00 ( 1.72%)
Min alloc-odr0-8 203.00 ( 0.00%) 199.00 ( 1.97%)
Min alloc-odr0-16 188.00 ( 0.00%) 186.00 ( 1.06%)
Min alloc-odr0-32 182.00 ( 0.00%) 179.00 ( 1.65%)
Min alloc-odr0-64 177.00 ( 0.00%) 174.00 ( 1.69%)
Min alloc-odr0-128 175.00 ( 0.00%) 172.00 ( 1.71%)
Min alloc-odr0-256 184.00 ( 0.00%) 181.00 ( 1.63%)
Min alloc-odr0-512 197.00 ( 0.00%) 193.00 ( 2.03%)
Min alloc-odr0-1024 203.00 ( 0.00%) 201.00 ( 0.99%)
Min alloc-odr0-2048 209.00 ( 0.00%) 206.00 ( 1.44%)
Min alloc-odr0-4096 214.00 ( 0.00%) 212.00 ( 0.93%)
Min alloc-odr0-8192 218.00 ( 0.00%) 215.00 ( 1.38%)
Min alloc-odr0-16384 219.00 ( 0.00%) 216.00 ( 1.37%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The page allocator iterates through a zonelist for zones that match the
addressing limitations and nodemask of the caller but many allocations
will not be restricted. Despite this, there is always functional call
overhead which builds up.
This patch inlines the optimistic basic case and only calls the iterator
function for the complex case. A hindrance was the fact that
cpuset_current_mems_allowed is used in the fastpath as the allowed
nodemask even though all nodes are allowed on most systems. The patch
handles this by only considering cpuset_current_mems_allowed if a cpuset
exists. As well as being faster in the fast-path, this removes some
junk in the slowpath.
The performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
statinline-v1r20 optiter-v1r20
Min alloc-odr0-1 412.00 ( 0.00%) 382.00 ( 7.28%)
Min alloc-odr0-2 301.00 ( 0.00%) 282.00 ( 6.31%)
Min alloc-odr0-4 247.00 ( 0.00%) 233.00 ( 5.67%)
Min alloc-odr0-8 215.00 ( 0.00%) 203.00 ( 5.58%)
Min alloc-odr0-16 199.00 ( 0.00%) 188.00 ( 5.53%)
Min alloc-odr0-32 191.00 ( 0.00%) 182.00 ( 4.71%)
Min alloc-odr0-64 187.00 ( 0.00%) 177.00 ( 5.35%)
Min alloc-odr0-128 185.00 ( 0.00%) 175.00 ( 5.41%)
Min alloc-odr0-256 193.00 ( 0.00%) 184.00 ( 4.66%)
Min alloc-odr0-512 207.00 ( 0.00%) 197.00 ( 4.83%)
Min alloc-odr0-1024 213.00 ( 0.00%) 203.00 ( 4.69%)
Min alloc-odr0-2048 220.00 ( 0.00%) 209.00 ( 5.00%)
Min alloc-odr0-4096 226.00 ( 0.00%) 214.00 ( 5.31%)
Min alloc-odr0-8192 229.00 ( 0.00%) 218.00 ( 4.80%)
Min alloc-odr0-16384 229.00 ( 0.00%) 219.00 ( 4.37%)
perf indicated that next_zones_zonelist disappeared in the profile and
__next_zones_zonelist did not appear. This is expected as the
micro-benchmark would hit the inlined fast-path every time.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
zone_statistics has one call-site but it's a public function. Make it
static and inline.
The performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
statbranch-v1r20 statinline-v1r20
Min alloc-odr0-1 419.00 ( 0.00%) 412.00 ( 1.67%)
Min alloc-odr0-2 305.00 ( 0.00%) 301.00 ( 1.31%)
Min alloc-odr0-4 250.00 ( 0.00%) 247.00 ( 1.20%)
Min alloc-odr0-8 219.00 ( 0.00%) 215.00 ( 1.83%)
Min alloc-odr0-16 203.00 ( 0.00%) 199.00 ( 1.97%)
Min alloc-odr0-32 195.00 ( 0.00%) 191.00 ( 2.05%)
Min alloc-odr0-64 191.00 ( 0.00%) 187.00 ( 2.09%)
Min alloc-odr0-128 189.00 ( 0.00%) 185.00 ( 2.12%)
Min alloc-odr0-256 198.00 ( 0.00%) 193.00 ( 2.53%)
Min alloc-odr0-512 210.00 ( 0.00%) 207.00 ( 1.43%)
Min alloc-odr0-1024 216.00 ( 0.00%) 213.00 ( 1.39%)
Min alloc-odr0-2048 221.00 ( 0.00%) 220.00 ( 0.45%)
Min alloc-odr0-4096 227.00 ( 0.00%) 226.00 ( 0.44%)
Min alloc-odr0-8192 232.00 ( 0.00%) 229.00 ( 1.29%)
Min alloc-odr0-16384 232.00 ( 0.00%) 229.00 ( 1.29%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
zone_statistics has more branches than it really needs to take an
unlikely GFP flag into account. Reduce the number and annotate the
unlikely flag.
The performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
nocompound-v1r10 statbranch-v1r10
Min alloc-odr0-1 417.00 ( 0.00%) 419.00 ( -0.48%)
Min alloc-odr0-2 308.00 ( 0.00%) 305.00 ( 0.97%)
Min alloc-odr0-4 253.00 ( 0.00%) 250.00 ( 1.19%)
Min alloc-odr0-8 221.00 ( 0.00%) 219.00 ( 0.90%)
Min alloc-odr0-16 205.00 ( 0.00%) 203.00 ( 0.98%)
Min alloc-odr0-32 199.00 ( 0.00%) 195.00 ( 2.01%)
Min alloc-odr0-64 193.00 ( 0.00%) 191.00 ( 1.04%)
Min alloc-odr0-128 191.00 ( 0.00%) 189.00 ( 1.05%)
Min alloc-odr0-256 200.00 ( 0.00%) 198.00 ( 1.00%)
Min alloc-odr0-512 212.00 ( 0.00%) 210.00 ( 0.94%)
Min alloc-odr0-1024 219.00 ( 0.00%) 216.00 ( 1.37%)
Min alloc-odr0-2048 225.00 ( 0.00%) 221.00 ( 1.78%)
Min alloc-odr0-4096 231.00 ( 0.00%) 227.00 ( 1.73%)
Min alloc-odr0-8192 234.00 ( 0.00%) 232.00 ( 0.85%)
Min alloc-odr0-16384 234.00 ( 0.00%) 232.00 ( 0.85%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The PageAnon check always checks for compound_head but this is a
relatively expensive check if the caller already knows the page is a
head page. This patch creates a helper and uses it in the page free
path which only operates on head pages.
With this patch and "Only check PageCompound for high-order pages", the
performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
vanilla nocompound-v1r20
Min alloc-odr0-1 425.00 ( 0.00%) 417.00 ( 1.88%)
Min alloc-odr0-2 313.00 ( 0.00%) 308.00 ( 1.60%)
Min alloc-odr0-4 257.00 ( 0.00%) 253.00 ( 1.56%)
Min alloc-odr0-8 224.00 ( 0.00%) 221.00 ( 1.34%)
Min alloc-odr0-16 208.00 ( 0.00%) 205.00 ( 1.44%)
Min alloc-odr0-32 199.00 ( 0.00%) 199.00 ( 0.00%)
Min alloc-odr0-64 195.00 ( 0.00%) 193.00 ( 1.03%)
Min alloc-odr0-128 192.00 ( 0.00%) 191.00 ( 0.52%)
Min alloc-odr0-256 204.00 ( 0.00%) 200.00 ( 1.96%)
Min alloc-odr0-512 213.00 ( 0.00%) 212.00 ( 0.47%)
Min alloc-odr0-1024 219.00 ( 0.00%) 219.00 ( 0.00%)
Min alloc-odr0-2048 225.00 ( 0.00%) 225.00 ( 0.00%)
Min alloc-odr0-4096 230.00 ( 0.00%) 231.00 ( -0.43%)
Min alloc-odr0-8192 235.00 ( 0.00%) 234.00 ( 0.43%)
Min alloc-odr0-16384 235.00 ( 0.00%) 234.00 ( 0.43%)
Min free-odr0-1 215.00 ( 0.00%) 191.00 ( 11.16%)
Min free-odr0-2 152.00 ( 0.00%) 136.00 ( 10.53%)
Min free-odr0-4 119.00 ( 0.00%) 107.00 ( 10.08%)
Min free-odr0-8 106.00 ( 0.00%) 96.00 ( 9.43%)
Min free-odr0-16 97.00 ( 0.00%) 87.00 ( 10.31%)
Min free-odr0-32 91.00 ( 0.00%) 83.00 ( 8.79%)
Min free-odr0-64 89.00 ( 0.00%) 81.00 ( 8.99%)
Min free-odr0-128 88.00 ( 0.00%) 80.00 ( 9.09%)
Min free-odr0-256 106.00 ( 0.00%) 95.00 ( 10.38%)
Min free-odr0-512 116.00 ( 0.00%) 111.00 ( 4.31%)
Min free-odr0-1024 125.00 ( 0.00%) 118.00 ( 5.60%)
Min free-odr0-2048 133.00 ( 0.00%) 126.00 ( 5.26%)
Min free-odr0-4096 136.00 ( 0.00%) 130.00 ( 4.41%)
Min free-odr0-8192 138.00 ( 0.00%) 130.00 ( 5.80%)
Min free-odr0-16384 137.00 ( 0.00%) 130.00 ( 5.11%)
There is a sizable boost to the free allocator performance. While there
is an apparent boost on the allocation side, it's likely a co-incidence
or due to the patches slightly reducing cache footprint.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Another year, another round of page allocator optimisations focusing
this time on the alloc and free fast paths. This should be of help to
workloads that are allocator-intensive from kernel space where the cost
of zeroing is not nceessraily incurred.
The series is motivated by the observation that page alloc
microbenchmarks on multiple machines regressed between 3.12.44 and 4.4.
Second, there is discussions before LSF/MM considering the possibility
of adding another page allocator which is potentially hazardous but a
patch series improving performance is better than whining.
After the series is applied, there are still hazards. In the free
paths, the debugging checking and page zone/pageblock lookups dominate
but there was not an obvious solution to that. In the alloc path, the
major contributers are dealing with zonelists, new page preperation, the
fair zone allocation and numerous statistic updates. The fair zone
allocator is removed by the per-node LRU series if that gets merged so
it's nor a major concern at the moment.
On normal userspace benchmarks, there is little impact as the zeroing
cost is significant but it's visible
aim9
4.6.0-rc3 4.6.0-rc3
vanilla deferalloc-v3
Min page_test 828693.33 ( 0.00%) 887060.00 ( 7.04%)
Min brk_test 4847266.67 ( 0.00%) 4966266.67 ( 2.45%)
Min exec_test 1271.00 ( 0.00%) 1275.67 ( 0.37%)
Min fork_test 12371.75 ( 0.00%) 12380.00 ( 0.07%)
The overall impact on a page allocator microbenchmark for a range of orders
and number of pages allocated in a batch is
4.6.0-rc3 4.6.0-rc3
vanilla deferalloc-v3r7
Min alloc-odr0-1 428.00 ( 0.00%) 316.00 ( 26.17%)
Min alloc-odr0-2 314.00 ( 0.00%) 231.00 ( 26.43%)
Min alloc-odr0-4 256.00 ( 0.00%) 192.00 ( 25.00%)
Min alloc-odr0-8 222.00 ( 0.00%) 166.00 ( 25.23%)
Min alloc-odr0-16 207.00 ( 0.00%) 154.00 ( 25.60%)
Min alloc-odr0-32 197.00 ( 0.00%) 148.00 ( 24.87%)
Min alloc-odr0-64 193.00 ( 0.00%) 144.00 ( 25.39%)
Min alloc-odr0-128 191.00 ( 0.00%) 143.00 ( 25.13%)
Min alloc-odr0-256 203.00 ( 0.00%) 153.00 ( 24.63%)
Min alloc-odr0-512 212.00 ( 0.00%) 165.00 ( 22.17%)
Min alloc-odr0-1024 221.00 ( 0.00%) 172.00 ( 22.17%)
Min alloc-odr0-2048 225.00 ( 0.00%) 179.00 ( 20.44%)
Min alloc-odr0-4096 232.00 ( 0.00%) 185.00 ( 20.26%)
Min alloc-odr0-8192 235.00 ( 0.00%) 187.00 ( 20.43%)
Min alloc-odr0-16384 236.00 ( 0.00%) 188.00 ( 20.34%)
Min alloc-odr1-1 519.00 ( 0.00%) 450.00 ( 13.29%)
Min alloc-odr1-2 391.00 ( 0.00%) 336.00 ( 14.07%)
Min alloc-odr1-4 313.00 ( 0.00%) 268.00 ( 14.38%)
Min alloc-odr1-8 277.00 ( 0.00%) 235.00 ( 15.16%)
Min alloc-odr1-16 256.00 ( 0.00%) 218.00 ( 14.84%)
Min alloc-odr1-32 252.00 ( 0.00%) 212.00 ( 15.87%)
Min alloc-odr1-64 244.00 ( 0.00%) 206.00 ( 15.57%)
Min alloc-odr1-128 244.00 ( 0.00%) 207.00 ( 15.16%)
Min alloc-odr1-256 243.00 ( 0.00%) 207.00 ( 14.81%)
Min alloc-odr1-512 245.00 ( 0.00%) 209.00 ( 14.69%)
Min alloc-odr1-1024 248.00 ( 0.00%) 214.00 ( 13.71%)
Min alloc-odr1-2048 253.00 ( 0.00%) 220.00 ( 13.04%)
Min alloc-odr1-4096 258.00 ( 0.00%) 224.00 ( 13.18%)
Min alloc-odr1-8192 261.00 ( 0.00%) 229.00 ( 12.26%)
Min alloc-odr2-1 560.00 ( 0.00%) 753.00 (-34.46%)
Min alloc-odr2-2 424.00 ( 0.00%) 351.00 ( 17.22%)
Min alloc-odr2-4 339.00 ( 0.00%) 393.00 (-15.93%)
Min alloc-odr2-8 298.00 ( 0.00%) 246.00 ( 17.45%)
Min alloc-odr2-16 276.00 ( 0.00%) 227.00 ( 17.75%)
Min alloc-odr2-32 271.00 ( 0.00%) 221.00 ( 18.45%)
Min alloc-odr2-64 264.00 ( 0.00%) 217.00 ( 17.80%)
Min alloc-odr2-128 264.00 ( 0.00%) 217.00 ( 17.80%)
Min alloc-odr2-256 264.00 ( 0.00%) 218.00 ( 17.42%)
Min alloc-odr2-512 269.00 ( 0.00%) 223.00 ( 17.10%)
Min alloc-odr2-1024 279.00 ( 0.00%) 230.00 ( 17.56%)
Min alloc-odr2-2048 283.00 ( 0.00%) 235.00 ( 16.96%)
Min alloc-odr2-4096 285.00 ( 0.00%) 239.00 ( 16.14%)
Min alloc-odr3-1 629.00 ( 0.00%) 505.00 ( 19.71%)
Min alloc-odr3-2 472.00 ( 0.00%) 374.00 ( 20.76%)
Min alloc-odr3-4 383.00 ( 0.00%) 301.00 ( 21.41%)
Min alloc-odr3-8 341.00 ( 0.00%) 266.00 ( 21.99%)
Min alloc-odr3-16 316.00 ( 0.00%) 248.00 ( 21.52%)
Min alloc-odr3-32 308.00 ( 0.00%) 241.00 ( 21.75%)
Min alloc-odr3-64 305.00 ( 0.00%) 241.00 ( 20.98%)
Min alloc-odr3-128 308.00 ( 0.00%) 244.00 ( 20.78%)
Min alloc-odr3-256 317.00 ( 0.00%) 249.00 ( 21.45%)
Min alloc-odr3-512 327.00 ( 0.00%) 256.00 ( 21.71%)
Min alloc-odr3-1024 331.00 ( 0.00%) 261.00 ( 21.15%)
Min alloc-odr3-2048 333.00 ( 0.00%) 266.00 ( 20.12%)
Min alloc-odr4-1 767.00 ( 0.00%) 572.00 ( 25.42%)
Min alloc-odr4-2 578.00 ( 0.00%) 429.00 ( 25.78%)
Min alloc-odr4-4 474.00 ( 0.00%) 346.00 ( 27.00%)
Min alloc-odr4-8 422.00 ( 0.00%) 310.00 ( 26.54%)
Min alloc-odr4-16 399.00 ( 0.00%) 295.00 ( 26.07%)
Min alloc-odr4-32 392.00 ( 0.00%) 293.00 ( 25.26%)
Min alloc-odr4-64 394.00 ( 0.00%) 293.00 ( 25.63%)
Min alloc-odr4-128 405.00 ( 0.00%) 305.00 ( 24.69%)
Min alloc-odr4-256 417.00 ( 0.00%) 319.00 ( 23.50%)
Min alloc-odr4-512 425.00 ( 0.00%) 326.00 ( 23.29%)
Min alloc-odr4-1024 426.00 ( 0.00%) 329.00 ( 22.77%)
Min free-odr0-1 216.00 ( 0.00%) 178.00 ( 17.59%)
Min free-odr0-2 152.00 ( 0.00%) 125.00 ( 17.76%)
Min free-odr0-4 120.00 ( 0.00%) 99.00 ( 17.50%)
Min free-odr0-8 106.00 ( 0.00%) 85.00 ( 19.81%)
Min free-odr0-16 97.00 ( 0.00%) 80.00 ( 17.53%)
Min free-odr0-32 92.00 ( 0.00%) 76.00 ( 17.39%)
Min free-odr0-64 89.00 ( 0.00%) 74.00 ( 16.85%)
Min free-odr0-128 89.00 ( 0.00%) 73.00 ( 17.98%)
Min free-odr0-256 107.00 ( 0.00%) 90.00 ( 15.89%)
Min free-odr0-512 117.00 ( 0.00%) 108.00 ( 7.69%)
Min free-odr0-1024 125.00 ( 0.00%) 118.00 ( 5.60%)
Min free-odr0-2048 132.00 ( 0.00%) 125.00 ( 5.30%)
Min free-odr0-4096 135.00 ( 0.00%) 130.00 ( 3.70%)
Min free-odr0-8192 137.00 ( 0.00%) 130.00 ( 5.11%)
Min free-odr0-16384 137.00 ( 0.00%) 131.00 ( 4.38%)
Min free-odr1-1 318.00 ( 0.00%) 289.00 ( 9.12%)
Min free-odr1-2 228.00 ( 0.00%) 207.00 ( 9.21%)
Min free-odr1-4 182.00 ( 0.00%) 165.00 ( 9.34%)
Min free-odr1-8 163.00 ( 0.00%) 146.00 ( 10.43%)
Min free-odr1-16 151.00 ( 0.00%) 135.00 ( 10.60%)
Min free-odr1-32 146.00 ( 0.00%) 129.00 ( 11.64%)
Min free-odr1-64 145.00 ( 0.00%) 130.00 ( 10.34%)
Min free-odr1-128 148.00 ( 0.00%) 134.00 ( 9.46%)
Min free-odr1-256 148.00 ( 0.00%) 137.00 ( 7.43%)
Min free-odr1-512 151.00 ( 0.00%) 140.00 ( 7.28%)
Min free-odr1-1024 154.00 ( 0.00%) 143.00 ( 7.14%)
Min free-odr1-2048 156.00 ( 0.00%) 144.00 ( 7.69%)
Min free-odr1-4096 156.00 ( 0.00%) 142.00 ( 8.97%)
Min free-odr1-8192 156.00 ( 0.00%) 140.00 ( 10.26%)
Min free-odr2-1 361.00 ( 0.00%) 457.00 (-26.59%)
Min free-odr2-2 258.00 ( 0.00%) 224.00 ( 13.18%)
Min free-odr2-4 208.00 ( 0.00%) 223.00 ( -7.21%)
Min free-odr2-8 185.00 ( 0.00%) 160.00 ( 13.51%)
Min free-odr2-16 173.00 ( 0.00%) 149.00 ( 13.87%)
Min free-odr2-32 166.00 ( 0.00%) 145.00 ( 12.65%)
Min free-odr2-64 166.00 ( 0.00%) 146.00 ( 12.05%)
Min free-odr2-128 169.00 ( 0.00%) 148.00 ( 12.43%)
Min free-odr2-256 170.00 ( 0.00%) 152.00 ( 10.59%)
Min free-odr2-512 177.00 ( 0.00%) 156.00 ( 11.86%)
Min free-odr2-1024 182.00 ( 0.00%) 162.00 ( 10.99%)
Min free-odr2-2048 181.00 ( 0.00%) 160.00 ( 11.60%)
Min free-odr2-4096 180.00 ( 0.00%) 159.00 ( 11.67%)
Min free-odr3-1 431.00 ( 0.00%) 367.00 ( 14.85%)
Min free-odr3-2 306.00 ( 0.00%) 259.00 ( 15.36%)
Min free-odr3-4 249.00 ( 0.00%) 208.00 ( 16.47%)
Min free-odr3-8 224.00 ( 0.00%) 186.00 ( 16.96%)
Min free-odr3-16 208.00 ( 0.00%) 176.00 ( 15.38%)
Min free-odr3-32 206.00 ( 0.00%) 174.00 ( 15.53%)
Min free-odr3-64 210.00 ( 0.00%) 178.00 ( 15.24%)
Min free-odr3-128 215.00 ( 0.00%) 182.00 ( 15.35%)
Min free-odr3-256 224.00 ( 0.00%) 189.00 ( 15.62%)
Min free-odr3-512 232.00 ( 0.00%) 195.00 ( 15.95%)
Min free-odr3-1024 230.00 ( 0.00%) 195.00 ( 15.22%)
Min free-odr3-2048 229.00 ( 0.00%) 193.00 ( 15.72%)
Min free-odr4-1 561.00 ( 0.00%) 439.00 ( 21.75%)
Min free-odr4-2 418.00 ( 0.00%) 318.00 ( 23.92%)
Min free-odr4-4 339.00 ( 0.00%) 269.00 ( 20.65%)
Min free-odr4-8 299.00 ( 0.00%) 239.00 ( 20.07%)
Min free-odr4-16 289.00 ( 0.00%) 234.00 ( 19.03%)
Min free-odr4-32 291.00 ( 0.00%) 235.00 ( 19.24%)
Min free-odr4-64 298.00 ( 0.00%) 238.00 ( 20.13%)
Min free-odr4-128 308.00 ( 0.00%) 251.00 ( 18.51%)
Min free-odr4-256 321.00 ( 0.00%) 267.00 ( 16.82%)
Min free-odr4-512 327.00 ( 0.00%) 269.00 ( 17.74%)
Min free-odr4-1024 326.00 ( 0.00%) 271.00 ( 16.87%)
Min total-odr0-1 644.00 ( 0.00%) 494.00 ( 23.29%)
Min total-odr0-2 466.00 ( 0.00%) 356.00 ( 23.61%)
Min total-odr0-4 376.00 ( 0.00%) 291.00 ( 22.61%)
Min total-odr0-8 328.00 ( 0.00%) 251.00 ( 23.48%)
Min total-odr0-16 304.00 ( 0.00%) 234.00 ( 23.03%)
Min total-odr0-32 289.00 ( 0.00%) 224.00 ( 22.49%)
Min total-odr0-64 282.00 ( 0.00%) 218.00 ( 22.70%)
Min total-odr0-128 280.00 ( 0.00%) 216.00 ( 22.86%)
Min total-odr0-256 310.00 ( 0.00%) 243.00 ( 21.61%)
Min total-odr0-512 329.00 ( 0.00%) 273.00 ( 17.02%)
Min total-odr0-1024 346.00 ( 0.00%) 290.00 ( 16.18%)
Min total-odr0-2048 357.00 ( 0.00%) 304.00 ( 14.85%)
Min total-odr0-4096 367.00 ( 0.00%) 315.00 ( 14.17%)
Min total-odr0-8192 372.00 ( 0.00%) 317.00 ( 14.78%)
Min total-odr0-16384 373.00 ( 0.00%) 319.00 ( 14.48%)
Min total-odr1-1 838.00 ( 0.00%) 739.00 ( 11.81%)
Min total-odr1-2 619.00 ( 0.00%) 543.00 ( 12.28%)
Min total-odr1-4 495.00 ( 0.00%) 433.00 ( 12.53%)
Min total-odr1-8 440.00 ( 0.00%) 382.00 ( 13.18%)
Min total-odr1-16 407.00 ( 0.00%) 353.00 ( 13.27%)
Min total-odr1-32 398.00 ( 0.00%) 341.00 ( 14.32%)
Min total-odr1-64 389.00 ( 0.00%) 336.00 ( 13.62%)
Min total-odr1-128 392.00 ( 0.00%) 341.00 ( 13.01%)
Min total-odr1-256 391.00 ( 0.00%) 344.00 ( 12.02%)
Min total-odr1-512 396.00 ( 0.00%) 349.00 ( 11.87%)
Min total-odr1-1024 402.00 ( 0.00%) 357.00 ( 11.19%)
Min total-odr1-2048 409.00 ( 0.00%) 364.00 ( 11.00%)
Min total-odr1-4096 414.00 ( 0.00%) 366.00 ( 11.59%)
Min total-odr1-8192 417.00 ( 0.00%) 369.00 ( 11.51%)
Min total-odr2-1 921.00 ( 0.00%) 1210.00 (-31.38%)
Min total-odr2-2 682.00 ( 0.00%) 576.00 ( 15.54%)
Min total-odr2-4 547.00 ( 0.00%) 616.00 (-12.61%)
Min total-odr2-8 483.00 ( 0.00%) 406.00 ( 15.94%)
Min total-odr2-16 449.00 ( 0.00%) 376.00 ( 16.26%)
Min total-odr2-32 437.00 ( 0.00%) 366.00 ( 16.25%)
Min total-odr2-64 431.00 ( 0.00%) 363.00 ( 15.78%)
Min total-odr2-128 433.00 ( 0.00%) 365.00 ( 15.70%)
Min total-odr2-256 434.00 ( 0.00%) 371.00 ( 14.52%)
Min total-odr2-512 446.00 ( 0.00%) 379.00 ( 15.02%)
Min total-odr2-1024 461.00 ( 0.00%) 392.00 ( 14.97%)
Min total-odr2-2048 464.00 ( 0.00%) 395.00 ( 14.87%)
Min total-odr2-4096 465.00 ( 0.00%) 398.00 ( 14.41%)
Min total-odr3-1 1060.00 ( 0.00%) 872.00 ( 17.74%)
Min total-odr3-2 778.00 ( 0.00%) 633.00 ( 18.64%)
Min total-odr3-4 632.00 ( 0.00%) 510.00 ( 19.30%)
Min total-odr3-8 565.00 ( 0.00%) 452.00 ( 20.00%)
Min total-odr3-16 524.00 ( 0.00%) 424.00 ( 19.08%)
Min total-odr3-32 514.00 ( 0.00%) 415.00 ( 19.26%)
Min total-odr3-64 515.00 ( 0.00%) 419.00 ( 18.64%)
Min total-odr3-128 523.00 ( 0.00%) 426.00 ( 18.55%)
Min total-odr3-256 541.00 ( 0.00%) 438.00 ( 19.04%)
Min total-odr3-512 559.00 ( 0.00%) 451.00 ( 19.32%)
Min total-odr3-1024 561.00 ( 0.00%) 456.00 ( 18.72%)
Min total-odr3-2048 562.00 ( 0.00%) 459.00 ( 18.33%)
Min total-odr4-1 1328.00 ( 0.00%) 1011.00 ( 23.87%)
Min total-odr4-2 997.00 ( 0.00%) 747.00 ( 25.08%)
Min total-odr4-4 813.00 ( 0.00%) 615.00 ( 24.35%)
Min total-odr4-8 721.00 ( 0.00%) 550.00 ( 23.72%)
Min total-odr4-16 689.00 ( 0.00%) 529.00 ( 23.22%)
Min total-odr4-32 683.00 ( 0.00%) 528.00 ( 22.69%)
Min total-odr4-64 692.00 ( 0.00%) 531.00 ( 23.27%)
Min total-odr4-128 713.00 ( 0.00%) 556.00 ( 22.02%)
Min total-odr4-256 738.00 ( 0.00%) 586.00 ( 20.60%)
Min total-odr4-512 753.00 ( 0.00%) 595.00 ( 20.98%)
Min total-odr4-1024 752.00 ( 0.00%) 600.00 ( 20.21%)
This patch (of 27):
order-0 pages by definition cannot be compound so avoid the check in the
fast path for those pages.
[akpm@linux-foundation.org: use unlikely(order) in free_pages_prepare(), per Vlastimil]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Right now the oom reaper will clear TIF_MEMDIE only for tasks which were
successfully reaped. This is the safest option because we know that
such an oom victim would only block forward progress of the oom killer
without a good reason because it is highly unlikely it would release
much more memory. Basically most of its memory has been already torn
down.
We can relax this assumption to catch more corner cases though.
The first obvious one is when the oom victim clears its mm and gets
stuck later on. oom_reaper would back of on find_lock_task_mm returning
NULL. We can safely try to clear TIF_MEMDIE in this case because such a
task would be ignored by the oom killer anyway. The flag would be
cleared by that time already most of the time anyway.
The less obvious one is when the oom reaper fails due to mmap_sem
contention. Even if we clear TIF_MEMDIE for this task then it is not
very likely that we would select another task too easily because we
haven't reaped the last victim and so it would be still the #1
candidate. There is a rare race condition possible when the current
victim terminates before the next select_bad_process but considering
that oom_reap_task had retried several times before giving up then this
sounds like a borderline thing.
After this patch we should have a guarantee that the OOM killer will not
be block for unbounded amount of time for most cases.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Raushaniya Maksudova <rmaksudova@parallels.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If either the current task is already killed or PF_EXITING or a selected
task is PF_EXITING then the oom killer is suppressed and so is the oom
reaper. This patch adds try_oom_reaper which checks the given task and
queues it for the oom reaper if that is safe to be done meaning that the
task doesn't share the mm with an alive process.
This might help to release the memory pressure while the task tries to
exit.
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Raushaniya Maksudova <rmaksudova@parallels.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__alloc_pages_may_oom is the central place to decide when the
out_of_memory should be invoked. This is a good approach for most
checks there because they are page allocator specific and the allocation
fails right after for all of them.
The notable exception is GFP_NOFS context which is faking
did_some_progress and keep the page allocator looping even though there
couldn't have been any progress from the OOM killer. This patch doesn't
change this behavior because we are not ready to allow those allocation
requests to fail yet (and maybe we will face the reality that we will
never manage to safely fail these request). Instead __GFP_FS check is
moved down to out_of_memory and prevent from OOM victim selection there.
There are two reasons for that
- OOM notifiers might release some memory even from this context
as none of the registered notifier seems to be FS related
- this might help a dying thread to get an access to memory
reserves and move on which will make the behavior more
consistent with the case when the task gets killed from a
different context.
Keep a comment in __alloc_pages_may_oom to make sure we do not forget
how GFP_NOFS is special and that we really want to do something about
it.
Note to the current oom_notifier users:
The observable difference for you is that oom notifiers cannot depend on
any fs locks because we could deadlock. Not that this would be allowed
today because that would just lockup machine in most of the cases and
ruling out the OOM killer along the way. Another difference is that
callbacks might be invoked sooner now because GFP_NOFS is a weaker
reclaim context and so there could be reclaimable memory which is just
not reachable now. That would require GFP_NOFS only loads which are
really rare and more importantly the observable result would be dropping
of reconstructible object and potential performance drop which is not
such a big deal when we are struggling to fulfill other important
allocation requests.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Raushaniya Maksudova <rmaksudova@parallels.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE specifies the default value for the
memory hotplug onlining policy. Add a command line parameter to make it
possible to override the default. It may come handy for debug and
testing purposes.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patchset continues the work I started with commit 31bc3858ea3e
("memory-hotplug: add automatic onlining policy for the newly added
memory").
Initially I was going to stop there and bring the policy setting logic
to userspace. I met two issues on this way:
1) It is possible to have memory hotplugged at boot (e.g. with QEMU).
These blocks stay offlined if we turn the onlining policy on by
userspace.
2) My attempt to bring this policy setting to systemd failed, systemd
maintainers suggest to change the default in kernel or ... to use
tmpfiles.d to alter the policy (which looks like a hack to me):
https://github.com/systemd/systemd/pull/2938
Here I suggest to add a config option to set the default value for the
policy and a kernel command line parameter to make the override.
This patch (of 2):
Introduce config option to set the default value for memory hotplug
onlining policy (/sys/devices/system/memory/auto_online_blocks). The
reason one would want to turn this option on are to have early onlining
for hotpluggable memory available at boot and to not require any
userspace actions to make memory hotplug work.
[akpm@linux-foundation.org: tweak Kconfig text]
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I've just discovered that the useful-sounding has_transparent_hugepage()
is actually an architecture-dependent minefield: on some arches it only
builds if CONFIG_TRANSPARENT_HUGEPAGE=y, on others it's also there when
not, but on some of those (arm and arm64) it then gives the wrong
answer; and on mips alone it's marked __init, which would crash if
called later (but so far it has not been called later).
Straighten this out: make it available to all configs, with a sensible
default in asm-generic/pgtable.h, removing its definitions from those
arches (arc, arm, arm64, sparc, tile) which are served by the default,
adding #define has_transparent_hugepage has_transparent_hugepage to
those (mips, powerpc, s390, x86) which need to override the default at
runtime, and removing the __init from mips (but maybe that kind of code
should be avoided after init: set a static variable the first time it's
called).
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [arch/s390]
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Michal Hocko
Rik van Riel
Johannes Weiner
Arnd Bergmann
Mel Gorman
Vlastimil Babka
Vitaly Kuznetsov
Hugh Dickins