aboutsummaryrefslogtreecommitdiffstats
path: root/mm/page_alloc.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-05-20mm: check_new_page_bad() directly returns in __PG_HWPOISON caseNaoya Horiguchi1-6/+3
Currently we check page->flags twice for "HWPoisoned" case of check_new_page_bad(), which can cause a race with unpoisoning. This race unnecessarily taints kernel with "BUG: Bad page state". check_new_page_bad() is the only caller of bad_page() which is interested in __PG_HWPOISON, so let's move the hwpoison related code in bad_page() to it. Link: http://lkml.kernel.org/r/20160518100949.GA17299@hori1.linux.bs1.fc.nec.co.jp Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm, kasan: fix to call kasan_free_pages() after poisoning pageseokhoon.yoon1-1/+1
When CONFIG_PAGE_POISONING and CONFIG_KASAN is enabled, free_pages_prepare()'s codeflow is below. 1)kmemcheck_free_shadow() 2)kasan_free_pages() - set shadow byte of page is freed 3)kernel_poison_pages() 3.1) check access to page is valid or not using kasan ---> error occur, kasan think it is invalid access 3.2) poison page 4)kernel_map_pages() So kasan_free_pages() should be called after poisoning the page. Link: http://lkml.kernel.org/r/1463220405-7455-1-git-send-email-iamyooon@gmail.com Signed-off-by: seokhoon.yoon <iamyooon@gmail.com> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm: use phys_addr_t for reserve_bootmem_region() argumentsStefan Bader1-1/+1
Since commit 92923ca3aace ("mm: meminit: only set page reserved in the memblock region") the reserved bit is set on reserved memblock regions. However start and end address are passed as unsigned long. This is only 32bit on i386, so it can end up marking the wrong pages reserved for ranges at 4GB and above. This was observed on a 32bit Xen dom0 which was booted with initial memory set to a value below 4G but allowing to balloon in memory (dom0_mem=1024M for example). This would define a reserved bootmem region for the additional memory (for example on a 8GB system there was a reverved region covering the 4GB-8GB range). But since the addresses were passed on as unsigned long, this was actually marking all pages from 0 to 4GB as reserved. Fixes: 92923ca3aacef63 ("mm: meminit: only set page reserved in the memblock region") Link: http://lkml.kernel.org/r/1463491221-10573-1-git-send-email-stefan.bader@canonical.com Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm: use existing helper to convert "on"/"off" to booleanMinfei Huang1-8/+1
It's more convenient to use existing function helper to convert string "on/off" to boolean. Link: http://lkml.kernel.org/r/1461908824-16129-1-git-send-email-mnghuan@gmail.com Signed-off-by: Minfei Huang <mnghuan@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm, oom: protect !costly allocations some more for !CONFIG_COMPACTIONMichal Hocko1-0/+18
Joonsoo has reported that he is able to trigger OOM for !costly high order requests (heavy fork() workload close the OOM) with the new oom detection rework. This is because we rely only on should_reclaim_retry when the compaction is disabled and it only checks watermarks for the requested order and so we might trigger OOM when there is a lot of free memory. It is not very clear what are the usual workloads when the compaction is disabled. Relying on high order allocations heavily without any mechanism to create those orders except for unbound amount of reclaim is certainly not a good idea. To prevent from potential regressions let's help this configuration some. We have to sacrifice the determinsm though because there simply is none here possible. should_compact_retry implementation for !CONFIG_COMPACTION, which was empty so far, will do watermark check for order-0 on all eligible zones. This will cause retrying until either the reclaim cannot make any further progress or all the zones are depleted even for order-0 pages. This means that the number of retries is basically unbounded for !costly orders but that was the case before the rework as well so this shouldn't regress. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463051677-29418-3-git-send-email-mhocko@kernel.org Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm, oom, compaction: prevent from should_compact_retry looping for ever for costly ordersMichal Hocko1-10/+13
"mm: consider compaction feedback also for costly allocation" has removed the upper bound for the reclaim/compaction retries based on the number of reclaimed pages for costly orders. While this is desirable the patch did miss a mis interaction between reclaim, compaction and the retry logic. The direct reclaim tries to get zones over min watermark while compaction backs off and returns COMPACT_SKIPPED when all zones are below low watermark + 1<<order gap. If we are getting really close to OOM then __compaction_suitable can keep returning COMPACT_SKIPPED a high order request (e.g. hugetlb order-9) while the reclaim is not able to release enough pages to get us over low watermark. The reclaim is still able to make some progress (usually trashing over few remaining pages) so we are not able to break out from the loop. I have seen this happening with the same test described in "mm: consider compaction feedback also for costly allocation" on a swapless system. The original problem got resolved by "vmscan: consider classzone_idx in compaction_ready" but it shows how things might go wrong when we approach the oom event horizont. The reason why compaction requires being over low rather than min watermark is not clear to me. This check was there essentially since 56de7263fcf3 ("mm: compaction: direct compact when a high-order allocation fails"). It is clearly an implementation detail though and we shouldn't pull it into the generic retry logic while we should be able to cope with such eventuality. The only place in should_compact_retry where we retry without any upper bound is for compaction_withdrawn() case. Introduce compaction_zonelist_suitable function which checks the given zonelist and returns true only if there is at least one zone which would would unblock __compaction_suitable if more memory got reclaimed. In this implementation it checks __compaction_suitable with NR_FREE_PAGES plus part of the reclaimable memory as the target for the watermark check. The reclaimable memory is reduced linearly by the allocation order. The idea is that we do not want to reclaim all the remaining memory for a single allocation request just unblock __compaction_suitable which doesn't guarantee we will make a further progress. The new helper is then used if compaction_withdrawn() feedback was provided so we do not retry if there is no outlook for a further progress. !costly requests shouldn't be affected much - e.g. order-2 pages would require to have at least 64kB on the reclaimable LRUs while order-9 would need at least 32M which should be enough to not lock up. [vbabka@suse.cz: fix classzone_idx vs. high_zoneidx usage in compaction_zonelist_suitable] [akpm@linux-foundation.org: fix it for Mel's mm-page_alloc-remove-field-from-alloc_context.patch] Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm: consider compaction feedback also for costly allocationMichal Hocko1-31/+32
PAGE_ALLOC_COSTLY_ORDER retry logic is mostly handled inside should_reclaim_retry currently where we decide to not retry after at least order worth of pages were reclaimed or the watermark check for at least one zone would succeed after reclaiming all pages if the reclaim hasn't made any progress. Compaction feedback is mostly ignored and we just try to make sure that the compaction did at least something before giving up. The first condition was added by a41f24ea9fd6 ("page allocator: smarter retry of costly-order allocations) and it assumed that lumpy reclaim could have created a page of the sufficient order. Lumpy reclaim, has been removed quite some time ago so the assumption doesn't hold anymore. Remove the check for the number of reclaimed pages and rely on the compaction feedback solely. should_reclaim_retry now only makes sure that we keep retrying reclaim for high order pages only if they are hidden by watermaks so order-0 reclaim makes really sense. should_compact_retry now keeps retrying even for the costly allocations. The number of retries is reduced wrt. !costly requests because they are less important and harder to grant and so their pressure shouldn't cause contention for other requests or cause an over reclaim. We also do not reset no_progress_loops for costly request to make sure we do not keep reclaiming too agressively. This has been tested by running a process which fragments memory: - compact memory - mmap large portion of the memory (1920M on 2GRAM machine with 2G of swapspace) - MADV_DONTNEED single page in PAGE_SIZE*((1UL<<MAX_ORDER)-1) steps until certain amount of memory is freed (250M in my test) and reduce the step to (step / 2) + 1 after reaching the end of the mapping - then run a script which populates the page cache 2G (MemTotal) from /dev/zero to a new file And then tries to allocate nr_hugepages=$(awk '/MemAvailable/{printf "%d\n", $2/(2*1024)}' /proc/meminfo) huge pages. root@test1:~# echo 1 > /proc/sys/vm/overcommit_memory;echo 1 > /proc/sys/vm/compact_memory; ./fragment-mem-and-run /root/alloc_hugepages.sh 1920M 250M Node 0, zone DMA 31 28 31 10 2 0 2 1 2 3 1 Node 0, zone DMA32 437 319 171 50 28 25 20 16 16 14 437 * This is the /proc/buddyinfo after the compaction Done fragmenting. size=2013265920 freed=262144000 Node 0, zone DMA 165 48 3 1 2 0 2 2 2 2 0 Node 0, zone DMA32 35109 14575 185 51 41 12 6 0 0 0 0 * /proc/buddyinfo after memory got fragmented Executing "/root/alloc_hugepages.sh" Eating some pagecache 508623+0 records in 508623+0 records out 2083319808 bytes (2.1 GB) copied, 11.7292 s, 178 MB/s Node 0, zone DMA 3 5 3 1 2 0 2 2 2 2 0 Node 0, zone DMA32 111 344 153 20 24 10 3 0 0 0 0 * /proc/buddyinfo after page cache got eaten Trying to allocate 129 129 * 129 hugepages requested and all of them granted. Node 0, zone DMA 3 5 3 1 2 0 2 2 2 2 0 Node 0, zone DMA32 127 97 30 99 11 6 2 1 4 0 0 * /proc/buddyinfo after hugetlb allocation. 10 runs will behave as follows: Trying to allocate 130 130 -- Trying to allocate 129 129 -- Trying to allocate 128 128 -- Trying to allocate 129 129 -- Trying to allocate 128 128 -- Trying to allocate 129 129 -- Trying to allocate 132 132 -- Trying to allocate 129 129 -- Trying to allocate 128 128 -- Trying to allocate 129 129 So basically 100% success for all 10 attempts. Without the patch numbers looked much worse: Trying to allocate 128 12 -- Trying to allocate 129 14 -- Trying to allocate 129 7 -- Trying to allocate 129 16 -- Trying to allocate 129 30 -- Trying to allocate 129 38 -- Trying to allocate 129 19 -- Trying to allocate 129 37 -- Trying to allocate 129 28 -- Trying to allocate 129 37 Just for completness the base kernel without oom detection rework looks as follows: Trying to allocate 127 30 -- Trying to allocate 129 12 -- Trying to allocate 129 52 -- Trying to allocate 128 32 -- Trying to allocate 129 12 -- Trying to allocate 129 10 -- Trying to allocate 129 32 -- Trying to allocate 128 14 -- Trying to allocate 128 16 -- Trying to allocate 129 8 As we can see the success rate is much more volatile and smaller without this patch. So the patch not only makes the retry logic for costly requests more sensible the success rate is even higher. Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm, oom: protect !costly allocations some moreMichal Hocko1-10/+78
should_reclaim_retry will give up retries for higher order allocations if none of the eligible zones has any requested or higher order pages available even if we pass the watermak check for order-0. This is done because there is no guarantee that the reclaimable and currently free pages will form the required order. This can, however, lead to situations where the high-order request (e.g. order-2 required for the stack allocation during fork) will trigger OOM too early - e.g. after the first reclaim/compaction round. Such a system would have to be highly fragmented and there is no guarantee further reclaim/compaction attempts would help but at least make sure that the compaction was active before we go OOM and keep retrying even if should_reclaim_retry tells us to oom if - the last compaction round backed off or - we haven't completed at least MAX_COMPACT_RETRIES active compaction rounds. The first rule ensures that the very last attempt for compaction was not ignored while the second guarantees that the compaction has done some work. Multiple retries might be needed to prevent occasional pigggy backing of other contexts to steal the compacted pages before the current context manages to retry to allocate them. compaction_failed() is taken as a final word from the compaction that the retry doesn't make much sense. We have to be careful though because the first compaction round is MIGRATE_ASYNC which is rather weak as it ignores pages under writeback and gives up too easily in other situations. We therefore have to make sure that MIGRATE_SYNC_LIGHT mode has been used before we give up. With this logic in place we do not have to increase the migration mode unconditionally and rather do it only if the compaction failed for the weaker mode. A nice side effect is that the stronger migration mode is used only when really needed so this has a potential of smaller latencies in some cases. Please note that the compaction doesn't tell us much about how successful it was when returning compaction_made_progress so we just have to blindly trust that another retry is worthwhile and cap the number to something reasonable to guarantee a convergence. If the given number of successful retries is not sufficient for a reasonable workloads we should focus on the collected compaction tracepoints data and try to address the issue in the compaction code. If this is not feasible we can increase the retries limit. [mhocko@suse.com: fix warning] Link: http://lkml.kernel.org/r/20160512061636.GA4200@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm: throttle on IO only when there are too many dirty and writeback pagesMichal Hocko1-4/+37
wait_iff_congested has been used to throttle allocator before it retried another round of direct reclaim to allow the writeback to make some progress and prevent reclaim from looping over dirty/writeback pages without making any progress. We used to do congestion_wait before commit 0e093d99763e ("writeback: do not sleep on the congestion queue if there are no congested BDIs or if significant congestion is not being encountered in the current zone") but that led to undesirable stalls and sleeping for the full timeout even when the BDI wasn't congested. Hence wait_iff_congested was used instead. But it seems that even wait_iff_congested doesn't work as expected. We might have a small file LRU list with all pages dirty/writeback and yet the bdi is not congested so this is just a cond_resched in the end and can end up triggering pre mature OOM. This patch replaces the unconditional wait_iff_congested by congestion_wait which is executed only if we _know_ that the last round of direct reclaim didn't make any progress and dirty+writeback pages are more than a half of the reclaimable pages on the zone which might be usable for our target allocation. This shouldn't reintroduce stalls fixed by 0e093d99763e because congestion_wait is called only when we are getting hopeless when sleeping is a better choice than OOM with many pages under IO. We have to preserve logic introduced by commit 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") into the __alloc_pages_slowpath now that wait_iff_congested is not used anymore. As the only remaining user of wait_iff_congested is shrink_inactive_list we can remove the WQ specific short sleep from wait_iff_congested because the sleep is needed to be done only once in the allocation retry cycle. [mhocko@suse.com: high_zoneidx->ac_classzone_idx to evaluate memory reserves properly] Link: http://lkml.kernel.org/r/1463051677-29418-2-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm, oom: rework oom detectionMichal Hocko1-8/+92
__alloc_pages_slowpath has traditionally relied on the direct reclaim and did_some_progress as an indicator that it makes sense to retry allocation rather than declaring OOM. shrink_zones had to rely on zone_reclaimable if shrink_zone didn't make any progress to prevent from a premature OOM killer invocation - the LRU might be full of dirty or writeback pages and direct reclaim cannot clean those up. zone_reclaimable allows to rescan the reclaimable lists several times and restart if a page is freed. This is really subtle behavior and it might lead to a livelock when a single freed page keeps allocator looping but the current task will not be able to allocate that single page. OOM killer would be more appropriate than looping without any progress for unbounded amount of time. This patch changes OOM detection logic and pulls it out from shrink_zone which is too low to be appropriate for any high level decisions such as OOM which is per zonelist property. It is __alloc_pages_slowpath which knows how many attempts have been done and what was the progress so far therefore it is more appropriate to implement this logic. The new heuristic is implemented in should_reclaim_retry helper called from __alloc_pages_slowpath. It tries to be more deterministic and easier to follow. It builds on an assumption that retrying makes sense only if the currently reclaimable memory + free pages would allow the current allocation request to succeed (as per __zone_watermark_ok) at least for one zone in the usable zonelist. This alone wouldn't be sufficient, though, because the writeback might get stuck and reclaimable pages might be pinned for a really long time or even depend on the current allocation context. Therefore there is a backoff mechanism implemented which reduces the reclaim target after each reclaim round without any progress. This means that we should eventually converge to only NR_FREE_PAGES as the target and fail on the wmark check and proceed to OOM. The backoff is simple and linear with 1/16 of the reclaimable pages for each round without any progress. We are optimistic and reset counter for successful reclaim rounds. Costly high order pages mostly preserve their semantic and those without __GFP_REPEAT fail right away while those which have the flag set will back off after the amount of reclaimable pages reaches equivalent of the requested order. The only difference is that if there was no progress during the reclaim we rely on zone watermark check. This is more logical thing to do than previous 1<<order attempts which were a result of zone_reclaimable faking the progress. [vdavydov@virtuozzo.com: check classzone_idx for shrink_zone] [hannes@cmpxchg.org: separate the heuristic into should_reclaim_retry] [rientjes@google.com: use zone_page_state_snapshot for NR_FREE_PAGES] [rientjes@google.com: shrink_zones doesn't need to return anything] Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm, compaction: simplify __alloc_pages_direct_compact feedback interfaceMichal Hocko1-36/+31
__alloc_pages_direct_compact communicates potential back off by two variables: - deferred_compaction tells that the compaction returned COMPACT_DEFERRED - contended_compaction is set when there is a contention on zone->lock resp. zone->lru_lock locks __alloc_pages_slowpath then backs of for THP allocation requests to prevent from long stalls. This is rather messy and it would be much cleaner to return a single compact result value and hide all the nasty details into __alloc_pages_direct_compact. This patch shouldn't introduce any functional changes. Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm, compaction: change COMPACT_ constants into enumMichal Hocko1-1/+1
Compaction code is doing weird dances between COMPACT_FOO -> int -> unsigned long But there doesn't seem to be any reason for that. All functions which return/use one of those constants are not expecting any other value so it really makes sense to define an enum for them and make it clear that no other values are expected. This is a pure cleanup and shouldn't introduce any functional changes. Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm: vmscan: reduce size of inactive file listRik van Riel1-44/+0
The inactive file list should still be large enough to contain readahead windows and freshly written file data, but it no longer is the only source for detecting multiple accesses to file pages. The workingset refault measurement code causes recently evicted file pages that get accessed again after a shorter interval to be promoted directly to the active list. With that mechanism in place, we can afford to (on a larger system) dedicate more memory to the active file list, so we can actually cache more of the frequently used file pages in memory, and not have them pushed out by streaming writes, once-used streaming file reads, etc. This can help things like database workloads, where only half the page cache can currently be used to cache the database working set. This patch automatically increases that fraction on larger systems, using the same ratio that has already been used for anonymous memory. [hannes@cmpxchg.org: cgroup-awareness] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: restore the original nodemask if the fast path allocation failedMel Gorman1-0/+6
The page allocator fast path uses either the requested nodemask or cpuset_current_mems_allowed if cpusets are enabled. If the allocation context allows watermarks to be ignored then it can also ignore memory policies. However, on entering the allocator slowpath the nodemask may still be cpuset_current_mems_allowed and the policies are enforced. This patch resets the nodemask appropriately before entering the slowpath. Link: http://lkml.kernel.org/r/20160504143628.GU2858@techsingularity.net Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: uninline the bad page part of check_new_page()Vlastimil Babka1-16/+17
Bad pages should be rare so the code handling them doesn't need to be inline for performance reasons. Put it to separate function which returns void. This also assumes that the initial page_expected_state() result will match the result of the thorough check, i.e. the page doesn't become "good" in the meanwhile. This matches the same expectations already in place in free_pages_check(). !DEBUG_VM bloat-o-meter: add/remove: 1/0 grow/shrink: 0/1 up/down: 134/-274 (-140) function old new delta check_new_page_bad - 134 +134 get_page_from_freelist 3468 3194 -274 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: don't duplicate code in free_pcp_prepareMel Gorman1-78/+55
The new free_pcp_prepare() function shares a lot of code with free_pages_prepare(), which makes this a maintenance risk when some future patch modifies only one of them. We should be able to achieve the same effect (skipping free_pages_check() from !DEBUG_VM configs) by adding a parameter to free_pages_prepare() and making it inline, so the checks (and the order != 0 parts) are eliminated from the call from free_pcp_prepare(). !DEBUG_VM: bloat-o-meter reports no difference, as my gcc was already inlining free_pages_prepare() and the elimination seems to work as expected DEBUG_VM bloat-o-meter: add/remove: 0/1 grow/shrink: 2/0 up/down: 1035/-778 (257) function old new delta __free_pages_ok 297 1060 +763 free_hot_cold_page 480 752 +272 free_pages_prepare 778 - -778 Here inlining didn't occur before, and added some code, but it's ok for a debug option. [akpm@linux-foundation.org: fix build] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: defer debugging checks of pages allocated from the PCPMel Gorman1-28/+64
Every page allocated checks a number of page fields for validity. This catches corruption bugs of pages that are already freed but it is expensive. This patch weakens the debugging check by checking PCP pages only when the PCP lists are being refilled. All compound pages are checked. This potentially avoids debugging checks entirely if the PCP lists are never emptied and refilled so some corruption issues may be missed. Full checking requires DEBUG_VM. With the two deferred debugging patches applied, the impact to a page allocator microbenchmark is 4.6.0-rc3 4.6.0-rc3 inline-v3r6 deferalloc-v3r7 Min alloc-odr0-1 344.00 ( 0.00%) 317.00 ( 7.85%) Min alloc-odr0-2 248.00 ( 0.00%) 231.00 ( 6.85%) Min alloc-odr0-4 209.00 ( 0.00%) 192.00 ( 8.13%) Min alloc-odr0-8 181.00 ( 0.00%) 166.00 ( 8.29%) Min alloc-odr0-16 168.00 ( 0.00%) 154.00 ( 8.33%) Min alloc-odr0-32 161.00 ( 0.00%) 148.00 ( 8.07%) Min alloc-odr0-64 158.00 ( 0.00%) 145.00 ( 8.23%) Min alloc-odr0-128 156.00 ( 0.00%) 143.00 ( 8.33%) Min alloc-odr0-256 168.00 ( 0.00%) 154.00 ( 8.33%) Min alloc-odr0-512 178.00 ( 0.00%) 167.00 ( 6.18%) Min alloc-odr0-1024 186.00 ( 0.00%) 174.00 ( 6.45%) Min alloc-odr0-2048 192.00 ( 0.00%) 180.00 ( 6.25%) Min alloc-odr0-4096 198.00 ( 0.00%) 184.00 ( 7.07%) Min alloc-odr0-8192 200.00 ( 0.00%) 188.00 ( 6.00%) Min alloc-odr0-16384 201.00 ( 0.00%) 188.00 ( 6.47%) Min free-odr0-1 189.00 ( 0.00%) 180.00 ( 4.76%) Min free-odr0-2 132.00 ( 0.00%) 126.00 ( 4.55%) Min free-odr0-4 104.00 ( 0.00%) 99.00 ( 4.81%) Min free-odr0-8 90.00 ( 0.00%) 85.00 ( 5.56%) Min free-odr0-16 84.00 ( 0.00%) 80.00 ( 4.76%) Min free-odr0-32 80.00 ( 0.00%) 76.00 ( 5.00%) Min free-odr0-64 78.00 ( 0.00%) 74.00 ( 5.13%) Min free-odr0-128 77.00 ( 0.00%) 73.00 ( 5.19%) Min free-odr0-256 94.00 ( 0.00%) 91.00 ( 3.19%) Min free-odr0-512 108.00 ( 0.00%) 112.00 ( -3.70%) Min free-odr0-1024 115.00 ( 0.00%) 118.00 ( -2.61%) Min free-odr0-2048 120.00 ( 0.00%) 125.00 ( -4.17%) Min free-odr0-4096 123.00 ( 0.00%) 129.00 ( -4.88%) Min free-odr0-8192 126.00 ( 0.00%) 130.00 ( -3.17%) Min free-odr0-16384 126.00 ( 0.00%) 131.00 ( -3.97%) Note that the free paths for large numbers of pages is impacted as the debugging cost gets shifted into that path when the page data is no longer necessarily cache-hot. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: defer debugging checks of freed pages until a PCP drainMel Gorman1-51/+101
Every page free checks a number of page fields for validity. This catches premature frees and corruptions but it is also expensive. This patch weakens the debugging check by checking PCP pages at the time they are drained from the PCP list. This will trigger the bug but the site that freed the corrupt page will be lost. To get the full context, a kernel rebuild with DEBUG_VM is necessary. [akpm@linux-foundation.org: fix build] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19cpuset: use static key better and convert to new APIVlastimil Babka1-1/+1
An important function for cpusets is cpuset_node_allowed(), which optimizes on the fact if there's a single root CPU set, it must be trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the cpusets_enabled_key static key the right way where static keys eliminate branching overhead with jump labels. This patch converts it so that static key is used properly. It's also switched to the new static key API and the checking functions are converted to return bool instead of int. We also provide a new variant __cpuset_zone_allowed() which expects that the static key check was already done and they key was enabled. This is needed for get_page_from_freelist() where we want to also avoid the relatively slower check when ALLOC_CPUSET is not set in alloc_flags. The impact on the page allocator microbenchmark is less than expected but the cleanup in itself is worthwhile. 4.6.0-rc2 4.6.0-rc2 multcheck-v1r20 cpuset-v1r20 Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%) Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%) Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%) Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%) Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%) Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%) Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%) Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%) Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%) Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%) Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%) Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%) Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%) Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%) Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Zefan Li <lizefan@huawei.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: inline pageblock lookup in page free fast pathsMel Gorman1-88/+100
The function call overhead of get_pfnblock_flags_mask() is measurable in the page free paths. This patch uses an inlined version that is faster. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: remove unnecessary variable from free_pcppages_bulkMel Gorman1-4/+3
The original count is never reused so it can be removed. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: pull out side effects from free_pages_checkMel Gorman1-5/+8
Check without side-effects should be easier to maintain. It also removes the duplicated cpupid and flags reset done in !DEBUG_VM variant of both free_pcp_prepare() and then bulkfree_pcp_prepare(). Finally, it enables the next patch. It shouldn't result in new branches, thanks to inlining of the check. !DEBUG_VM bloat-o-meter: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-27 (-27) function old new delta __free_pages_ok 748 739 -9 free_pcppages_bulk 1403 1385 -18 DEBUG_VM: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-28 (-28) function old new delta free_pages_prepare 806 778 -28 This is also slightly faster because cpupid information is not set on tail pages so we can avoid resets there. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: un-inline the bad part of free_pages_checkMel Gorman1-8/+13
From: Vlastimil Babka <vbabka@suse.cz> !DEBUG_VM size and bloat-o-meter: add/remove: 1/0 grow/shrink: 0/2 up/down: 124/-370 (-246) function old new delta free_pages_check_bad - 124 +124 free_pcppages_bulk 1288 1171 -117 __free_pages_ok 948 695 -253 DEBUG_VM: add/remove: 1/0 grow/shrink: 0/1 up/down: 124/-214 (-90) function old new delta free_pages_check_bad - 124 +124 free_pages_prepare 1112 898 -214 [akpm@linux-foundation.org: fix whitespace] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: check multiple page fields with a single branchMel Gorman1-12/+43
Every page allocated or freed is checked for sanity to avoid corruptions that are difficult to detect later. A bad page could be due to a number of fields. Instead of using multiple branches, this patch combines multiple fields into a single branch. A detailed check is only necessary if that check fails. 4.6.0-rc2 4.6.0-rc2 initonce-v1r20 multcheck-v1r20 Min alloc-odr0-1 359.00 ( 0.00%) 348.00 ( 3.06%) Min alloc-odr0-2 260.00 ( 0.00%) 254.00 ( 2.31%) Min alloc-odr0-4 214.00 ( 0.00%) 213.00 ( 0.47%) Min alloc-odr0-8 186.00 ( 0.00%) 186.00 ( 0.00%) Min alloc-odr0-16 173.00 ( 0.00%) 173.00 ( 0.00%) Min alloc-odr0-32 165.00 ( 0.00%) 166.00 ( -0.61%) Min alloc-odr0-64 162.00 ( 0.00%) 162.00 ( 0.00%) Min alloc-odr0-128 161.00 ( 0.00%) 160.00 ( 0.62%) Min alloc-odr0-256 170.00 ( 0.00%) 169.00 ( 0.59%) Min alloc-odr0-512 181.00 ( 0.00%) 180.00 ( 0.55%) Min alloc-odr0-1024 190.00 ( 0.00%) 188.00 ( 1.05%) Min alloc-odr0-2048 196.00 ( 0.00%) 194.00 ( 1.02%) Min alloc-odr0-4096 202.00 ( 0.00%) 199.00 ( 1.49%) Min alloc-odr0-8192 205.00 ( 0.00%) 202.00 ( 1.46%) Min alloc-odr0-16384 205.00 ( 0.00%) 203.00 ( 0.98%) Again, the benefit is marginal but avoiding excessive branches is important. Ideally the paths would not have to check these conditions at all but regrettably abandoning the tests would make use-after-free bugs much harder to detect. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: remove field from alloc_contextMel Gorman1-5/+3
The classzone_idx can be inferred from preferred_zoneref so remove the unnecessary field and save stack space. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: avoid looking up the first zone in a zonelist twiceMel Gorman1-18/+16
The allocator fast path looks up the first usable zone in a zonelist and then get_page_from_freelist does the same job in the zonelist iterator. This patch preserves the necessary information. 4.6.0-rc2 4.6.0-rc2 fastmark-v1r20 initonce-v1r20 Min alloc-odr0-1 364.00 ( 0.00%) 359.00 ( 1.37%) Min alloc-odr0-2 262.00 ( 0.00%) 260.00 ( 0.76%) Min alloc-odr0-4 214.00 ( 0.00%) 214.00 ( 0.00%) Min alloc-odr0-8 186.00 ( 0.00%) 186.00 ( 0.00%) Min alloc-odr0-16 173.00 ( 0.00%) 173.00 ( 0.00%) Min alloc-odr0-32 165.00 ( 0.00%) 165.00 ( 0.00%) Min alloc-odr0-64 161.00 ( 0.00%) 162.00 ( -0.62%) Min alloc-odr0-128 159.00 ( 0.00%) 161.00 ( -1.26%) Min alloc-odr0-256 168.00 ( 0.00%) 170.00 ( -1.19%) Min alloc-odr0-512 180.00 ( 0.00%) 181.00 ( -0.56%) Min alloc-odr0-1024 190.00 ( 0.00%) 190.00 ( 0.00%) Min alloc-odr0-2048 196.00 ( 0.00%) 196.00 ( 0.00%) Min alloc-odr0-4096 202.00 ( 0.00%) 202.00 ( 0.00%) Min alloc-odr0-8192 206.00 ( 0.00%) 205.00 ( 0.49%) Min alloc-odr0-16384 206.00 ( 0.00%) 205.00 ( 0.49%) The benefit is negligible and the results are within the noise but each cycle counts. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: shortcut watermark checks for order-0 pagesMel Gorman1-1/+27
Watermarks have to be checked on every allocation including the number of pages being allocated and whether reserves can be accessed. The reserves only matter if memory is limited and the free_pages adjustment only applies to high-order pages. This patch adds a shortcut for order-0 pages that avoids numerous calculations if there is plenty of free memory yielding the following performance difference in a page allocator microbenchmark; 4.6.0-rc2 4.6.0-rc2 optfair-v1r20 fastmark-v1r20 Min alloc-odr0-1 380.00 ( 0.00%) 364.00 ( 4.21%) Min alloc-odr0-2 273.00 ( 0.00%) 262.00 ( 4.03%) Min alloc-odr0-4 227.00 ( 0.00%) 214.00 ( 5.73%) Min alloc-odr0-8 196.00 ( 0.00%) 186.00 ( 5.10%) Min alloc-odr0-16 183.00 ( 0.00%) 173.00 ( 5.46%) Min alloc-odr0-32 173.00 ( 0.00%) 165.00 ( 4.62%) Min alloc-odr0-64 169.00 ( 0.00%) 161.00 ( 4.73%) Min alloc-odr0-128 169.00 ( 0.00%) 159.00 ( 5.92%) Min alloc-odr0-256 180.00 ( 0.00%) 168.00 ( 6.67%) Min alloc-odr0-512 190.00 ( 0.00%) 180.00 ( 5.26%) Min alloc-odr0-1024 198.00 ( 0.00%) 190.00 ( 4.04%) Min alloc-odr0-2048 204.00 ( 0.00%) 196.00 ( 3.92%) Min alloc-odr0-4096 209.00 ( 0.00%) 202.00 ( 3.35%) Min alloc-odr0-8192 213.00 ( 0.00%) 206.00 ( 3.29%) Min alloc-odr0-16384 214.00 ( 0.00%) 206.00 ( 3.74%) Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: reduce cost of fair zone allocation policy retryMel Gorman1-18/+14
The fair zone allocation policy is not without cost but it can be reduced slightly. This patch removes an unnecessary local variable, checks the likely conditions of the fair zone policy first, uses a bool instead of a flags check and falls through when a remote node is encountered instead of doing a full restart. The benefit is marginal but it's there 4.6.0-rc2 4.6.0-rc2 decstat-v1r20 optfair-v1r20 Min alloc-odr0-1 377.00 ( 0.00%) 380.00 ( -0.80%) Min alloc-odr0-2 273.00 ( 0.00%) 273.00 ( 0.00%) Min alloc-odr0-4 226.00 ( 0.00%) 227.00 ( -0.44%) Min alloc-odr0-8 196.00 ( 0.00%) 196.00 ( 0.00%) Min alloc-odr0-16 183.00 ( 0.00%) 183.00 ( 0.00%) Min alloc-odr0-32 175.00 ( 0.00%) 173.00 ( 1.14%) Min alloc-odr0-64 172.00 ( 0.00%) 169.00 ( 1.74%) Min alloc-odr0-128 170.00 ( 0.00%) 169.00 ( 0.59%) Min alloc-odr0-256 183.00 ( 0.00%) 180.00 ( 1.64%) Min alloc-odr0-512 191.00 ( 0.00%) 190.00 ( 0.52%) Min alloc-odr0-1024 199.00 ( 0.00%) 198.00 ( 0.50%) Min alloc-odr0-2048 204.00 ( 0.00%) 204.00 ( 0.00%) Min alloc-odr0-4096 210.00 ( 0.00%) 209.00 ( 0.48%) Min alloc-odr0-8192 213.00 ( 0.00%) 213.00 ( 0.00%) Min alloc-odr0-16384 214.00 ( 0.00%) 214.00 ( 0.00%) The benefit is marginal at best but one of the most important benefits, avoiding a second search when falling back to another node is not triggered by this particular test so the benefit for some corner cases is understated. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: shorten the page allocator fast pathMel Gorman1-16/+17
The page allocator fast path checks page multiple times unnecessarily. This patch avoids all the slowpath checks if the first allocation attempt succeeds. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: check once if a zone has isolated pageblocksMel Gorman1-1/+3
When bulk freeing pages from the per-cpu lists the zone is checked for isolated pageblocks on every release. This patch checks it once per drain. [mgorman@techsingularity.net: fix locking radce, per Vlastimil] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: move __GFP_HARDWALL modifications out of the fastpathMel Gorman1-3/+5
__GFP_HARDWALL only has meaning in the context of cpusets but the fast path always applies the flag on the first attempt. Move the manipulations into the cpuset paths where they will be masked by a static branch in the common case. With the other micro-optimisations in this series combined, the impact on a page allocator microbenchmark is 4.6.0-rc2 4.6.0-rc2 decstat-v1r20 micro-v1r20 Min alloc-odr0-1 381.00 ( 0.00%) 377.00 ( 1.05%) Min alloc-odr0-2 275.00 ( 0.00%) 273.00 ( 0.73%) Min alloc-odr0-4 229.00 ( 0.00%) 226.00 ( 1.31%) Min alloc-odr0-8 199.00 ( 0.00%) 196.00 ( 1.51%) Min alloc-odr0-16 186.00 ( 0.00%) 183.00 ( 1.61%) Min alloc-odr0-32 179.00 ( 0.00%) 175.00 ( 2.23%) Min alloc-odr0-64 174.00 ( 0.00%) 172.00 ( 1.15%) Min alloc-odr0-128 172.00 ( 0.00%) 170.00 ( 1.16%) Min alloc-odr0-256 181.00 ( 0.00%) 183.00 ( -1.10%) Min alloc-odr0-512 193.00 ( 0.00%) 191.00 ( 1.04%) Min alloc-odr0-1024 201.00 ( 0.00%) 199.00 ( 1.00%) Min alloc-odr0-2048 206.00 ( 0.00%) 204.00 ( 0.97%) Min alloc-odr0-4096 212.00 ( 0.00%) 210.00 ( 0.94%) Min alloc-odr0-8192 215.00 ( 0.00%) 213.00 ( 0.93%) Min alloc-odr0-16384 216.00 ( 0.00%) 214.00 ( 0.93%) Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: remove unnecessary initialisation from __alloc_pages_nodemask()Mel Gorman1-2/+5
page is guaranteed to be set before it is read with or without the initialisation. [akpm@linux-foundation.org: fix warning] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: remove unnecessary initialisation in get_page_from_freelistMel Gorman1-1/+1
Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: remove unnecessary local variable in get_page_from_freelistMel Gorman1-2/+1
zonelist here is a copy of a struct field that is used once. Ditch it. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: convert nr_fair_skipped to boolMel Gorman1-3/+3
The number of zones skipped to a zone expiring its fair zone allocation quota is irrelevant. Convert to bool. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: convert alloc_flags to unsignedMel Gorman1-12/+14
alloc_flags is a bitmask of flags but it is signed which does not necessarily generate the best code depending on the compiler. Even without an impact, it makes more sense that this be unsigned. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: avoid unnecessary zone lookups during pageblock operationsMel Gorman1-13/+9
Pageblocks have an associated bitmap to store migrate types and whether the pageblock should be skipped during compaction. The bitmap may be associated with a memory section or a zone but the zone is looked up unconditionally. The compiler should optimise this away automatically so this is a cosmetic patch only in many cases. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: use __dec_zone_state for order-0 page allocationMel Gorman1-1/+2
__dec_zone_state is cheaper to use for removing an order-0 page as it has fewer conditions to check. The performance difference on a page allocator microbenchmark is; 4.6.0-rc2 4.6.0-rc2 optiter-v1r20 decstat-v1r20 Min alloc-odr0-1 382.00 ( 0.00%) 381.00 ( 0.26%) Min alloc-odr0-2 282.00 ( 0.00%) 275.00 ( 2.48%) Min alloc-odr0-4 233.00 ( 0.00%) 229.00 ( 1.72%) Min alloc-odr0-8 203.00 ( 0.00%) 199.00 ( 1.97%) Min alloc-odr0-16 188.00 ( 0.00%) 186.00 ( 1.06%) Min alloc-odr0-32 182.00 ( 0.00%) 179.00 ( 1.65%) Min alloc-odr0-64 177.00 ( 0.00%) 174.00 ( 1.69%) Min alloc-odr0-128 175.00 ( 0.00%) 172.00 ( 1.71%) Min alloc-odr0-256 184.00 ( 0.00%) 181.00 ( 1.63%) Min alloc-odr0-512 197.00 ( 0.00%) 193.00 ( 2.03%) Min alloc-odr0-1024 203.00 ( 0.00%) 201.00 ( 0.99%) Min alloc-odr0-2048 209.00 ( 0.00%) 206.00 ( 1.44%) Min alloc-odr0-4096 214.00 ( 0.00%) 212.00 ( 0.93%) Min alloc-odr0-8192 218.00 ( 0.00%) 215.00 ( 1.38%) Min alloc-odr0-16384 219.00 ( 0.00%) 216.00 ( 1.37%) Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: inline the fast path of the zonelist iteratorMel Gorman1-17/+9
The page allocator iterates through a zonelist for zones that match the addressing limitations and nodemask of the caller but many allocations will not be restricted. Despite this, there is always functional call overhead which builds up. This patch inlines the optimistic basic case and only calls the iterator function for the complex case. A hindrance was the fact that cpuset_current_mems_allowed is used in the fastpath as the allowed nodemask even though all nodes are allowed on most systems. The patch handles this by only considering cpuset_current_mems_allowed if a cpuset exists. As well as being faster in the fast-path, this removes some junk in the slowpath. The performance difference on a page allocator microbenchmark is; 4.6.0-rc2 4.6.0-rc2 statinline-v1r20 optiter-v1r20 Min alloc-odr0-1 412.00 ( 0.00%) 382.00 ( 7.28%) Min alloc-odr0-2 301.00 ( 0.00%) 282.00 ( 6.31%) Min alloc-odr0-4 247.00 ( 0.00%) 233.00 ( 5.67%) Min alloc-odr0-8 215.00 ( 0.00%) 203.00 ( 5.58%) Min alloc-odr0-16 199.00 ( 0.00%) 188.00 ( 5.53%) Min alloc-odr0-32 191.00 ( 0.00%) 182.00 ( 4.71%) Min alloc-odr0-64 187.00 ( 0.00%) 177.00 ( 5.35%) Min alloc-odr0-128 185.00 ( 0.00%) 175.00 ( 5.41%) Min alloc-odr0-256 193.00 ( 0.00%) 184.00 ( 4.66%) Min alloc-odr0-512 207.00 ( 0.00%) 197.00 ( 4.83%) Min alloc-odr0-1024 213.00 ( 0.00%) 203.00 ( 4.69%) Min alloc-odr0-2048 220.00 ( 0.00%) 209.00 ( 5.00%) Min alloc-odr0-4096 226.00 ( 0.00%) 214.00 ( 5.31%) Min alloc-odr0-8192 229.00 ( 0.00%) 218.00 ( 4.80%) Min alloc-odr0-16384 229.00 ( 0.00%) 219.00 ( 4.37%) perf indicated that next_zones_zonelist disappeared in the profile and __next_zones_zonelist did not appear. This is expected as the micro-benchmark would hit the inlined fast-path every time. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: inline zone_statisticsMel Gorman1-0/+31
zone_statistics has one call-site but it's a public function. Make it static and inline. The performance difference on a page allocator microbenchmark is; 4.6.0-rc2 4.6.0-rc2 statbranch-v1r20 statinline-v1r20 Min alloc-odr0-1 419.00 ( 0.00%) 412.00 ( 1.67%) Min alloc-odr0-2 305.00 ( 0.00%) 301.00 ( 1.31%) Min alloc-odr0-4 250.00 ( 0.00%) 247.00 ( 1.20%) Min alloc-odr0-8 219.00 ( 0.00%) 215.00 ( 1.83%) Min alloc-odr0-16 203.00 ( 0.00%) 199.00 ( 1.97%) Min alloc-odr0-32 195.00 ( 0.00%) 191.00 ( 2.05%) Min alloc-odr0-64 191.00 ( 0.00%) 187.00 ( 2.09%) Min alloc-odr0-128 189.00 ( 0.00%) 185.00 ( 2.12%) Min alloc-odr0-256 198.00 ( 0.00%) 193.00 ( 2.53%) Min alloc-odr0-512 210.00 ( 0.00%) 207.00 ( 1.43%) Min alloc-odr0-1024 216.00 ( 0.00%) 213.00 ( 1.39%) Min alloc-odr0-2048 221.00 ( 0.00%) 220.00 ( 0.45%) Min alloc-odr0-4096 227.00 ( 0.00%) 226.00 ( 0.44%) Min alloc-odr0-8192 232.00 ( 0.00%) 229.00 ( 1.29%) Min alloc-odr0-16384 232.00 ( 0.00%) 229.00 ( 1.29%) Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: use new PageAnonHead helper in the free page fast pathMel Gorman1-1/+1
The PageAnon check always checks for compound_head but this is a relatively expensive check if the caller already knows the page is a head page. This patch creates a helper and uses it in the page free path which only operates on head pages. With this patch and "Only check PageCompound for high-order pages", the performance difference on a page allocator microbenchmark is; 4.6.0-rc2 4.6.0-rc2 vanilla nocompound-v1r20 Min alloc-odr0-1 425.00 ( 0.00%) 417.00 ( 1.88%) Min alloc-odr0-2 313.00 ( 0.00%) 308.00 ( 1.60%) Min alloc-odr0-4 257.00 ( 0.00%) 253.00 ( 1.56%) Min alloc-odr0-8 224.00 ( 0.00%) 221.00 ( 1.34%) Min alloc-odr0-16 208.00 ( 0.00%) 205.00 ( 1.44%) Min alloc-odr0-32 199.00 ( 0.00%) 199.00 ( 0.00%) Min alloc-odr0-64 195.00 ( 0.00%) 193.00 ( 1.03%) Min alloc-odr0-128 192.00 ( 0.00%) 191.00 ( 0.52%) Min alloc-odr0-256 204.00 ( 0.00%) 200.00 ( 1.96%) Min alloc-odr0-512 213.00 ( 0.00%) 212.00 ( 0.47%) Min alloc-odr0-1024 219.00 ( 0.00%) 219.00 ( 0.00%) Min alloc-odr0-2048 225.00 ( 0.00%) 225.00 ( 0.00%) Min alloc-odr0-4096 230.00 ( 0.00%) 231.00 ( -0.43%) Min alloc-odr0-8192 235.00 ( 0.00%) 234.00 ( 0.43%) Min alloc-odr0-16384 235.00 ( 0.00%) 234.00 ( 0.43%) Min free-odr0-1 215.00 ( 0.00%) 191.00 ( 11.16%) Min free-odr0-2 152.00 ( 0.00%) 136.00 ( 10.53%) Min free-odr0-4 119.00 ( 0.00%) 107.00 ( 10.08%) Min free-odr0-8 106.00 ( 0.00%) 96.00 ( 9.43%) Min free-odr0-16 97.00 ( 0.00%) 87.00 ( 10.31%) Min free-odr0-32 91.00 ( 0.00%) 83.00 ( 8.79%) Min free-odr0-64 89.00 ( 0.00%) 81.00 ( 8.99%) Min free-odr0-128 88.00 ( 0.00%) 80.00 ( 9.09%) Min free-odr0-256 106.00 ( 0.00%) 95.00 ( 10.38%) Min free-odr0-512 116.00 ( 0.00%) 111.00 ( 4.31%) Min free-odr0-1024 125.00 ( 0.00%) 118.00 ( 5.60%) Min free-odr0-2048 133.00 ( 0.00%) 126.00 ( 5.26%) Min free-odr0-4096 136.00 ( 0.00%) 130.00 ( 4.41%) Min free-odr0-8192 138.00 ( 0.00%) 130.00 ( 5.80%) Min free-odr0-16384 137.00 ( 0.00%) 130.00 ( 5.11%) There is a sizable boost to the free allocator performance. While there is an apparent boost on the allocation side, it's likely a co-incidence or due to the patches slightly reducing cache footprint. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, page_alloc: only check PageCompound for high-order pagesMel Gorman1-8/+17
Another year, another round of page allocator optimisations focusing this time on the alloc and free fast paths. This should be of help to workloads that are allocator-intensive from kernel space where the cost of zeroing is not nceessraily incurred. The series is motivated by the observation that page alloc microbenchmarks on multiple machines regressed between 3.12.44 and 4.4. Second, there is discussions before LSF/MM considering the possibility of adding another page allocator which is potentially hazardous but a patch series improving performance is better than whining. After the series is applied, there are still hazards. In the free paths, the debugging checking and page zone/pageblock lookups dominate but there was not an obvious solution to that. In the alloc path, the major contributers are dealing with zonelists, new page preperation, the fair zone allocation and numerous statistic updates. The fair zone allocator is removed by the per-node LRU series if that gets merged so it's nor a major concern at the moment. On normal userspace benchmarks, there is little impact as the zeroing cost is significant but it's visible aim9 4.6.0-rc3 4.6.0-rc3 vanilla deferalloc-v3 Min page_test 828693.33 ( 0.00%) 887060.00 ( 7.04%) Min brk_test 4847266.67 ( 0.00%) 4966266.67 ( 2.45%) Min exec_test 1271.00 ( 0.00%) 1275.67 ( 0.37%) Min fork_test 12371.75 ( 0.00%) 12380.00 ( 0.07%) The overall impact on a page allocator microbenchmark for a range of orders and number of pages allocated in a batch is 4.6.0-rc3 4.6.0-rc3 vanilla deferalloc-v3r7 Min alloc-odr0-1 428.00 ( 0.00%) 316.00 ( 26.17%) Min alloc-odr0-2 314.00 ( 0.00%) 231.00 ( 26.43%) Min alloc-odr0-4 256.00 ( 0.00%) 192.00 ( 25.00%) Min alloc-odr0-8 222.00 ( 0.00%) 166.00 ( 25.23%) Min alloc-odr0-16 207.00 ( 0.00%) 154.00 ( 25.60%) Min alloc-odr0-32 197.00 ( 0.00%) 148.00 ( 24.87%) Min alloc-odr0-64 193.00 ( 0.00%) 144.00 ( 25.39%) Min alloc-odr0-128 191.00 ( 0.00%) 143.00 ( 25.13%) Min alloc-odr0-256 203.00 ( 0.00%) 153.00 ( 24.63%) Min alloc-odr0-512 212.00 ( 0.00%) 165.00 ( 22.17%) Min alloc-odr0-1024 221.00 ( 0.00%) 172.00 ( 22.17%) Min alloc-odr0-2048 225.00 ( 0.00%) 179.00 ( 20.44%) Min alloc-odr0-4096 232.00 ( 0.00%) 185.00 ( 20.26%) Min alloc-odr0-8192 235.00 ( 0.00%) 187.00 ( 20.43%) Min alloc-odr0-16384 236.00 ( 0.00%) 188.00 ( 20.34%) Min alloc-odr1-1 519.00 ( 0.00%) 450.00 ( 13.29%) Min alloc-odr1-2 391.00 ( 0.00%) 336.00 ( 14.07%) Min alloc-odr1-4 313.00 ( 0.00%) 268.00 ( 14.38%) Min alloc-odr1-8 277.00 ( 0.00%) 235.00 ( 15.16%) Min alloc-odr1-16 256.00 ( 0.00%) 218.00 ( 14.84%) Min alloc-odr1-32 252.00 ( 0.00%) 212.00 ( 15.87%) Min alloc-odr1-64 244.00 ( 0.00%) 206.00 ( 15.57%) Min alloc-odr1-128 244.00 ( 0.00%) 207.00 ( 15.16%) Min alloc-odr1-256 243.00 ( 0.00%) 207.00 ( 14.81%) Min alloc-odr1-512 245.00 ( 0.00%) 209.00 ( 14.69%) Min alloc-odr1-1024 248.00 ( 0.00%) 214.00 ( 13.71%) Min alloc-odr1-2048 253.00 ( 0.00%) 220.00 ( 13.04%) Min alloc-odr1-4096 258.00 ( 0.00%) 224.00 ( 13.18%) Min alloc-odr1-8192 261.00 ( 0.00%) 229.00 ( 12.26%) Min alloc-odr2-1 560.00 ( 0.00%) 753.00 (-34.46%) Min alloc-odr2-2 424.00 ( 0.00%) 351.00 ( 17.22%) Min alloc-odr2-4 339.00 ( 0.00%) 393.00 (-15.93%) Min alloc-odr2-8 298.00 ( 0.00%) 246.00 ( 17.45%) Min alloc-odr2-16 276.00 ( 0.00%) 227.00 ( 17.75%) Min alloc-odr2-32 271.00 ( 0.00%) 221.00 ( 18.45%) Min alloc-odr2-64 264.00 ( 0.00%) 217.00 ( 17.80%) Min alloc-odr2-128 264.00 ( 0.00%) 217.00 ( 17.80%) Min alloc-odr2-256 264.00 ( 0.00%) 218.00 ( 17.42%) Min alloc-odr2-512 269.00 ( 0.00%) 223.00 ( 17.10%) Min alloc-odr2-1024 279.00 ( 0.00%) 230.00 ( 17.56%) Min alloc-odr2-2048 283.00 ( 0.00%) 235.00 ( 16.96%) Min alloc-odr2-4096 285.00 ( 0.00%) 239.00 ( 16.14%) Min alloc-odr3-1 629.00 ( 0.00%) 505.00 ( 19.71%) Min alloc-odr3-2 472.00 ( 0.00%) 374.00 ( 20.76%) Min alloc-odr3-4 383.00 ( 0.00%) 301.00 ( 21.41%) Min alloc-odr3-8 341.00 ( 0.00%) 266.00 ( 21.99%) Min alloc-odr3-16 316.00 ( 0.00%) 248.00 ( 21.52%) Min alloc-odr3-32 308.00 ( 0.00%) 241.00 ( 21.75%) Min alloc-odr3-64 305.00 ( 0.00%) 241.00 ( 20.98%) Min alloc-odr3-128 308.00 ( 0.00%) 244.00 ( 20.78%) Min alloc-odr3-256 317.00 ( 0.00%) 249.00 ( 21.45%) Min alloc-odr3-512 327.00 ( 0.00%) 256.00 ( 21.71%) Min alloc-odr3-1024 331.00 ( 0.00%) 261.00 ( 21.15%) Min alloc-odr3-2048 333.00 ( 0.00%) 266.00 ( 20.12%) Min alloc-odr4-1 767.00 ( 0.00%) 572.00 ( 25.42%) Min alloc-odr4-2 578.00 ( 0.00%) 429.00 ( 25.78%) Min alloc-odr4-4 474.00 ( 0.00%) 346.00 ( 27.00%) Min alloc-odr4-8 422.00 ( 0.00%) 310.00 ( 26.54%) Min alloc-odr4-16 399.00 ( 0.00%) 295.00 ( 26.07%) Min alloc-odr4-32 392.00 ( 0.00%) 293.00 ( 25.26%) Min alloc-odr4-64 394.00 ( 0.00%) 293.00 ( 25.63%) Min alloc-odr4-128 405.00 ( 0.00%) 305.00 ( 24.69%) Min alloc-odr4-256 417.00 ( 0.00%) 319.00 ( 23.50%) Min alloc-odr4-512 425.00 ( 0.00%) 326.00 ( 23.29%) Min alloc-odr4-1024 426.00 ( 0.00%) 329.00 ( 22.77%) Min free-odr0-1 216.00 ( 0.00%) 178.00 ( 17.59%) Min free-odr0-2 152.00 ( 0.00%) 125.00 ( 17.76%) Min free-odr0-4 120.00 ( 0.00%) 99.00 ( 17.50%) Min free-odr0-8 106.00 ( 0.00%) 85.00 ( 19.81%) Min free-odr0-16 97.00 ( 0.00%) 80.00 ( 17.53%) Min free-odr0-32 92.00 ( 0.00%) 76.00 ( 17.39%) Min free-odr0-64 89.00 ( 0.00%) 74.00 ( 16.85%) Min free-odr0-128 89.00 ( 0.00%) 73.00 ( 17.98%) Min free-odr0-256 107.00 ( 0.00%) 90.00 ( 15.89%) Min free-odr0-512 117.00 ( 0.00%) 108.00 ( 7.69%) Min free-odr0-1024 125.00 ( 0.00%) 118.00 ( 5.60%) Min free-odr0-2048 132.00 ( 0.00%) 125.00 ( 5.30%) Min free-odr0-4096 135.00 ( 0.00%) 130.00 ( 3.70%) Min free-odr0-8192 137.00 ( 0.00%) 130.00 ( 5.11%) Min free-odr0-16384 137.00 ( 0.00%) 131.00 ( 4.38%) Min free-odr1-1 318.00 ( 0.00%) 289.00 ( 9.12%) Min free-odr1-2 228.00 ( 0.00%) 207.00 ( 9.21%) Min free-odr1-4 182.00 ( 0.00%) 165.00 ( 9.34%) Min free-odr1-8 163.00 ( 0.00%) 146.00 ( 10.43%) Min free-odr1-16 151.00 ( 0.00%) 135.00 ( 10.60%) Min free-odr1-32 146.00 ( 0.00%) 129.00 ( 11.64%) Min free-odr1-64 145.00 ( 0.00%) 130.00 ( 10.34%) Min free-odr1-128 148.00 ( 0.00%) 134.00 ( 9.46%) Min free-odr1-256 148.00 ( 0.00%) 137.00 ( 7.43%) Min free-odr1-512 151.00 ( 0.00%) 140.00 ( 7.28%) Min free-odr1-1024 154.00 ( 0.00%) 143.00 ( 7.14%) Min free-odr1-2048 156.00 ( 0.00%) 144.00 ( 7.69%) Min free-odr1-4096 156.00 ( 0.00%) 142.00 ( 8.97%) Min free-odr1-8192 156.00 ( 0.00%) 140.00 ( 10.26%) Min free-odr2-1 361.00 ( 0.00%) 457.00 (-26.59%) Min free-odr2-2 258.00 ( 0.00%) 224.00 ( 13.18%) Min free-odr2-4 208.00 ( 0.00%) 223.00 ( -7.21%) Min free-odr2-8 185.00 ( 0.00%) 160.00 ( 13.51%) Min free-odr2-16 173.00 ( 0.00%) 149.00 ( 13.87%) Min free-odr2-32 166.00 ( 0.00%) 145.00 ( 12.65%) Min free-odr2-64 166.00 ( 0.00%) 146.00 ( 12.05%) Min free-odr2-128 169.00 ( 0.00%) 148.00 ( 12.43%) Min free-odr2-256 170.00 ( 0.00%) 152.00 ( 10.59%) Min free-odr2-512 177.00 ( 0.00%) 156.00 ( 11.86%) Min free-odr2-1024 182.00 ( 0.00%) 162.00 ( 10.99%) Min free-odr2-2048 181.00 ( 0.00%) 160.00 ( 11.60%) Min free-odr2-4096 180.00 ( 0.00%) 159.00 ( 11.67%) Min free-odr3-1 431.00 ( 0.00%) 367.00 ( 14.85%) Min free-odr3-2 306.00 ( 0.00%) 259.00 ( 15.36%) Min free-odr3-4 249.00 ( 0.00%) 208.00 ( 16.47%) Min free-odr3-8 224.00 ( 0.00%) 186.00 ( 16.96%) Min free-odr3-16 208.00 ( 0.00%) 176.00 ( 15.38%) Min free-odr3-32 206.00 ( 0.00%) 174.00 ( 15.53%) Min free-odr3-64 210.00 ( 0.00%) 178.00 ( 15.24%) Min free-odr3-128 215.00 ( 0.00%) 182.00 ( 15.35%) Min free-odr3-256 224.00 ( 0.00%) 189.00 ( 15.62%) Min free-odr3-512 232.00 ( 0.00%) 195.00 ( 15.95%) Min free-odr3-1024 230.00 ( 0.00%) 195.00 ( 15.22%) Min free-odr3-2048 229.00 ( 0.00%) 193.00 ( 15.72%) Min free-odr4-1 561.00 ( 0.00%) 439.00 ( 21.75%) Min free-odr4-2 418.00 ( 0.00%) 318.00 ( 23.92%) Min free-odr4-4 339.00 ( 0.00%) 269.00 ( 20.65%) Min free-odr4-8 299.00 ( 0.00%) 239.00 ( 20.07%) Min free-odr4-16 289.00 ( 0.00%) 234.00 ( 19.03%) Min free-odr4-32 291.00 ( 0.00%) 235.00 ( 19.24%) Min free-odr4-64 298.00 ( 0.00%) 238.00 ( 20.13%) Min free-odr4-128 308.00 ( 0.00%) 251.00 ( 18.51%) Min free-odr4-256 321.00 ( 0.00%) 267.00 ( 16.82%) Min free-odr4-512 327.00 ( 0.00%) 269.00 ( 17.74%) Min free-odr4-1024 326.00 ( 0.00%) 271.00 ( 16.87%) Min total-odr0-1 644.00 ( 0.00%) 494.00 ( 23.29%) Min total-odr0-2 466.00 ( 0.00%) 356.00 ( 23.61%) Min total-odr0-4 376.00 ( 0.00%) 291.00 ( 22.61%) Min total-odr0-8 328.00 ( 0.00%) 251.00 ( 23.48%) Min total-odr0-16 304.00 ( 0.00%) 234.00 ( 23.03%) Min total-odr0-32 289.00 ( 0.00%) 224.00 ( 22.49%) Min total-odr0-64 282.00 ( 0.00%) 218.00 ( 22.70%) Min total-odr0-128 280.00 ( 0.00%) 216.00 ( 22.86%) Min total-odr0-256 310.00 ( 0.00%) 243.00 ( 21.61%) Min total-odr0-512 329.00 ( 0.00%) 273.00 ( 17.02%) Min total-odr0-1024 346.00 ( 0.00%) 290.00 ( 16.18%) Min total-odr0-2048 357.00 ( 0.00%) 304.00 ( 14.85%) Min total-odr0-4096 367.00 ( 0.00%) 315.00 ( 14.17%) Min total-odr0-8192 372.00 ( 0.00%) 317.00 ( 14.78%) Min total-odr0-16384 373.00 ( 0.00%) 319.00 ( 14.48%) Min total-odr1-1 838.00 ( 0.00%) 739.00 ( 11.81%) Min total-odr1-2 619.00 ( 0.00%) 543.00 ( 12.28%) Min total-odr1-4 495.00 ( 0.00%) 433.00 ( 12.53%) Min total-odr1-8 440.00 ( 0.00%) 382.00 ( 13.18%) Min total-odr1-16 407.00 ( 0.00%) 353.00 ( 13.27%) Min total-odr1-32 398.00 ( 0.00%) 341.00 ( 14.32%) Min total-odr1-64 389.00 ( 0.00%) 336.00 ( 13.62%) Min total-odr1-128 392.00 ( 0.00%) 341.00 ( 13.01%) Min total-odr1-256 391.00 ( 0.00%) 344.00 ( 12.02%) Min total-odr1-512 396.00 ( 0.00%) 349.00 ( 11.87%) Min total-odr1-1024 402.00 ( 0.00%) 357.00 ( 11.19%) Min total-odr1-2048 409.00 ( 0.00%) 364.00 ( 11.00%) Min total-odr1-4096 414.00 ( 0.00%) 366.00 ( 11.59%) Min total-odr1-8192 417.00 ( 0.00%) 369.00 ( 11.51%) Min total-odr2-1 921.00 ( 0.00%) 1210.00 (-31.38%) Min total-odr2-2 682.00 ( 0.00%) 576.00 ( 15.54%) Min total-odr2-4 547.00 ( 0.00%) 616.00 (-12.61%) Min total-odr2-8 483.00 ( 0.00%) 406.00 ( 15.94%) Min total-odr2-16 449.00 ( 0.00%) 376.00 ( 16.26%) Min total-odr2-32 437.00 ( 0.00%) 366.00 ( 16.25%) Min total-odr2-64 431.00 ( 0.00%) 363.00 ( 15.78%) Min total-odr2-128 433.00 ( 0.00%) 365.00 ( 15.70%) Min total-odr2-256 434.00 ( 0.00%) 371.00 ( 14.52%) Min total-odr2-512 446.00 ( 0.00%) 379.00 ( 15.02%) Min total-odr2-1024 461.00 ( 0.00%) 392.00 ( 14.97%) Min total-odr2-2048 464.00 ( 0.00%) 395.00 ( 14.87%) Min total-odr2-4096 465.00 ( 0.00%) 398.00 ( 14.41%) Min total-odr3-1 1060.00 ( 0.00%) 872.00 ( 17.74%) Min total-odr3-2 778.00 ( 0.00%) 633.00 ( 18.64%) Min total-odr3-4 632.00 ( 0.00%) 510.00 ( 19.30%) Min total-odr3-8 565.00 ( 0.00%) 452.00 ( 20.00%) Min total-odr3-16 524.00 ( 0.00%) 424.00 ( 19.08%) Min total-odr3-32 514.00 ( 0.00%) 415.00 ( 19.26%) Min total-odr3-64 515.00 ( 0.00%) 419.00 ( 18.64%) Min total-odr3-128 523.00 ( 0.00%) 426.00 ( 18.55%) Min total-odr3-256 541.00 ( 0.00%) 438.00 ( 19.04%) Min total-odr3-512 559.00 ( 0.00%) 451.00 ( 19.32%) Min total-odr3-1024 561.00 ( 0.00%) 456.00 ( 18.72%) Min total-odr3-2048 562.00 ( 0.00%) 459.00 ( 18.33%) Min total-odr4-1 1328.00 ( 0.00%) 1011.00 ( 23.87%) Min total-odr4-2 997.00 ( 0.00%) 747.00 ( 25.08%) Min total-odr4-4 813.00 ( 0.00%) 615.00 ( 24.35%) Min total-odr4-8 721.00 ( 0.00%) 550.00 ( 23.72%) Min total-odr4-16 689.00 ( 0.00%) 529.00 ( 23.22%) Min total-odr4-32 683.00 ( 0.00%) 528.00 ( 22.69%) Min total-odr4-64 692.00 ( 0.00%) 531.00 ( 23.27%) Min total-odr4-128 713.00 ( 0.00%) 556.00 ( 22.02%) Min total-odr4-256 738.00 ( 0.00%) 586.00 ( 20.60%) Min total-odr4-512 753.00 ( 0.00%) 595.00 ( 20.98%) Min total-odr4-1024 752.00 ( 0.00%) 600.00 ( 20.21%) This patch (of 27): order-0 pages by definition cannot be compound so avoid the check in the fast path for those pages. [akpm@linux-foundation.org: use unlikely(order) in free_pages_prepare(), per Vlastimil] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm, oom: move GFP_NOFS check to out_of_memoryMichal Hocko1-14/+10
__alloc_pages_may_oom is the central place to decide when the out_of_memory should be invoked. This is a good approach for most checks there because they are page allocator specific and the allocation fails right after for all of them. The notable exception is GFP_NOFS context which is faking did_some_progress and keep the page allocator looping even though there couldn't have been any progress from the OOM killer. This patch doesn't change this behavior because we are not ready to allow those allocation requests to fail yet (and maybe we will face the reality that we will never manage to safely fail these request). Instead __GFP_FS check is moved down to out_of_memory and prevent from OOM victim selection there. There are two reasons for that - OOM notifiers might release some memory even from this context as none of the registered notifier seems to be FS related - this might help a dying thread to get an access to memory reserves and move on which will make the behavior more consistent with the case when the task gets killed from a different context. Keep a comment in __alloc_pages_may_oom to make sure we do not forget how GFP_NOFS is special and that we really want to do something about it. Note to the current oom_notifier users: The observable difference for you is that oom notifiers cannot depend on any fs locks because we could deadlock. Not that this would be allowed today because that would just lockup machine in most of the cases and ruling out the OOM killer along the way. Another difference is that callbacks might be invoked sooner now because GFP_NOFS is a weaker reclaim context and so there could be reclaimable memory which is just not reachable now. That would require GFP_NOFS only loads which are really rare and more importantly the observable result would be dropping of reconstructible object and potential performance drop which is not such a big deal when we are struggling to fulfill other important allocation requests. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Raushaniya Maksudova <rmaksudova@parallels.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm/page_alloc: correct highmem memory statisticsJoonsoo Kim1-5/+14
ZONE_MOVABLE could be treated as highmem so we need to consider it for accurate statistics. And, in following patches, ZONE_CMA will be introduced and it can be treated as highmem, too. So, instead of manually adding stat of ZONE_MOVABLE, looping all zones and check whether the zone is highmem or not and add stat of the zone which can be treated as highmem. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19power: add zone range overlapping checkJoonsoo Kim1-0/+4
There is a system thats node's pfns are overlapped as follows: -----pfn--------> N0 N1 N2 N0 N1 N2 Therefore, we need to care this overlapping when iterating pfn range. mark_free_pages() iterates requested zone's pfn range and unset all range's bitmap first. And then it marks freepages in a zone to the bitmap. If there is an overlapping zone, above unset could clear previous marked bit and reference to this bitmap in the future will cause the problem. To prevent it, this patch adds a zone check in mark_free_pages(). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm/memory_hotplug: add comment to some functions related to memory hotplugJoonsoo Kim1-1/+2
__offline_isolated_pages() and test_pages_isolated() are used by memory hotplug. These functions require that range is in a single zone but there is no code to do this because memory hotplug checks it before calling these functions. To avoid confusing future user of these functions, this patch adds comments to them. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm/page_alloc: Remove useless parameter of __free_pages_boot_coreLi Zhang1-6/+5
__free_pages_boot_core has parameter pfn which is not used at all. Remove it. Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com> Reviewed-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm: rename _count, field of the struct page, to _refcountJoonsoo Kim1-2/+2
Many developers already know that field for reference count of the struct page is _count and atomic type. They would try to handle it directly and this could break the purpose of page reference count tracepoint. To prevent direct _count modification, this patch rename it to _refcount and add warning message on the code. After that, developer who need to handle reference count will find that field should not be accessed directly. [akpm@linux-foundation.org: fix comments, per Vlastimil] [akpm@linux-foundation.org: Documentation/vm/transhuge.txt too] [sfr@canb.auug.org.au: sync ethernet driver changes] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Yuval Mintz <yuval.mintz@qlogic.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-05mm: update min_free_kbytes from khugepaged after core initializationJason Baron1-1/+1
Khugepaged attempts to raise min_free_kbytes if its set too low. However, on boot khugepaged sets min_free_kbytes first from subsys_initcall(), and then the mm 'core' over-rides min_free_kbytes after from init_per_zone_wmark_min(), via a module_init() call. Khugepaged used to use a late_initcall() to set min_free_kbytes (such that it occurred after the core initialization), however this was removed when the initialization of min_free_kbytes was integrated into the starting of the khugepaged thread. The fix here is simply to invoke the core initialization using a core_initcall() instead of module_init(), such that the previous initialization ordering is restored. I didn't restore the late_initcall() since start_stop_khugepaged() already sets min_free_kbytes via set_recommended_min_free_kbytes(). This was noticed when we had a number of page allocation failures when moving a workload to a kernel with this new initialization ordering. On an 8GB system this restores min_free_kbytes back to 67584 from 11365 when CONFIG_TRANSPARENT_HUGEPAGE=y is set and either CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y or CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y. Fixes: 79553da293d3 ("thp: cleanup khugepaged startup") Signed-off-by: Jason Baron <jbaron@akamai.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm/page_alloc: prevent merging between isolated and other pageblocksVlastimil Babka1-13/+33
Hanjun Guo has reported that a CMA stress test causes broken accounting of CMA and free pages: > Before the test, I got: > -bash-4.3# cat /proc/meminfo | grep Cma > CmaTotal: 204800 kB > CmaFree: 195044 kB > > > After running the test: > -bash-4.3# cat /proc/meminfo | grep Cma > CmaTotal: 204800 kB > CmaFree: 6602584 kB > > So the freed CMA memory is more than total.. > > Also the the MemFree is more than mem total: > > -bash-4.3# cat /proc/meminfo > MemTotal: 16342016 kB > MemFree: 22367268 kB > MemAvailable: 22370528 kB Laura Abbott has confirmed the issue and suspected the freepage accounting rewrite around 3.18/4.0 by Joonsoo Kim. Joonsoo had a theory that this is caused by unexpected merging between MIGRATE_ISOLATE and MIGRATE_CMA pageblocks: > CMA isolates MAX_ORDER aligned blocks, but, during the process, > partialy isolated block exists. If MAX_ORDER is 11 and > pageblock_order is 9, two pageblocks make up MAX_ORDER > aligned block and I can think following scenario because pageblock > (un)isolation would be done one by one. > > (each character means one pageblock. 'C', 'I' means MIGRATE_CMA, > MIGRATE_ISOLATE, respectively. > > CC -> IC -> II (Isolation) > II -> CI -> CC (Un-isolation) > > If some pages are freed at this intermediate state such as IC or CI, > that page could be merged to the other page that is resident on > different type of pageblock and it will cause wrong freepage count. This was supposed to be prevented by CMA operating on MAX_ORDER blocks, but since it doesn't hold the zone->lock between pageblocks, a race window does exist. It's also likely that unexpected merging can occur between MIGRATE_ISOLATE and non-CMA pageblocks. This should be prevented in __free_one_page() since commit 3c605096d315 ("mm/page_alloc: restrict max order of merging on isolated pageblock"). However, we only check the migratetype of the pageblock where buddy merging has been initiated, not the migratetype of the buddy pageblock (or group of pageblocks) which can be MIGRATE_ISOLATE. Joonsoo has suggested checking for buddy migratetype as part of page_is_buddy(), but that would add extra checks in allocator hotpath and bloat-o-meter has shown significant code bloat (the function is inline). This patch reduces the bloat at some expense of more complicated code. The buddy-merging while-loop in __free_one_page() is initially bounded to pageblock_border and without any migratetype checks. The checks are placed outside, bumping the max_order if merging is allowed, and returning to the while-loop with a statement which can't be possibly considered harmful. This fixes the accounting bug and also removes the arguably weird state in the original commit 3c605096d315 where buddies could be left unmerged. Fixes: 3c605096d315 ("mm/page_alloc: restrict max order of merging on isolated pageblock") Link: https://lkml.org/lkml/2016/3/2/280 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Debugged-by: Laura Abbott <labbott@redhat.com> Debugged-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>