aboutsummaryrefslogtreecommitdiffstats
path: root/mm/process_vm_access.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-03-18netns: constify net_hash_mix() and various callersEric Dumazet9-31/+31
const qualifiers ease code review by making clear which objects are not written in a function. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net/mlx4_en: Add tx queue maxrate supportOr Gerlitz1-0/+29
Add ndo_set_tx_maxrate support. To support per tx queue maxrate limit, we use the update-qp firmware command to do run-time rate setting for the qp that serves this tx ring. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net/mlx4_core: Add basic support for QP max-rate limitingOr Gerlitz7-6/+72
Add the low-level device commands and definitions used for QP max-rate limiting. This is done through the following elements: - read rate-limit device caps in QUERY_DEV_CAP: number of different rates and the min/max rates in Kbs/Mbs/Gbs units - enhance the QP context struct to contain rate limit units and value - allow to do run time rate-limit setting to QPs through the update-qp firmware command - QP rate-limiting is disallowed for VFs Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net: Add max rate tx queue attributeJohn Fastabend4-12/+80
This adds a tx_maxrate attribute to the tx queue sysfs entry allowing for max-rate limiting. Along with DCB-ETS and BQL this provides another knob to tune queue performance. The limit units are Mbps. By default it is disabled. To disable the rate limitation after it has been set for a queue, it should be set to zero. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18rhashtable: Remove max_shift and min_shiftHerbert Xu2-10/+1
Now that nobody uses max_shift and min_shift, we can safely remove them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18test_rhashtable: Use rhashtable max_size instead of max_shiftHerbert Xu1-1/+1
This patch converts test_rhashtable to use rhashtable max_size instead of the obsolete max_shift. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18tipc: Use rhashtable max/min_size instead of max/min_shiftHerbert Xu1-2/+2
This patch converts tipc to use rhashtable max/min_size instead of the obsolete max/min_shift. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18netlink: Use rhashtable max_size instead of max_shiftHerbert Xu1-1/+1
This patch converts netlink to use rhashtable max_size instead of the obsolete max_shift. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18rhashtable: Introduce max_size/min_sizeHerbert Xu2-4/+12
This patch adds the parameters max_size and min_size which are meant to replace max_shift and min_shift. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18rhashtable: Remove shift from bucket_tableHerbert Xu2-5/+2
Keeping both size and shift is silly. We only need one. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18drivers: net: xgene: Add second SGMII based 1G interfaceKeyur Chudgar4-12/+67
- Added resource initialization based on port-id field - Enabled second SGMII 1G interface Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18dtb: xgene: Add second SGMII based 1G interface nodeKeyur Chudgar2-0/+29
- Added new SGMII node for port 1 - Added port-id field Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18Documentation: dtb: Add port-id field for APM X-Gene ethernetKeyur Chudgar1-0/+2
Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17tipc: withdraw tipc topology server name when namespace is deletedYing Xue1-0/+3
The TIPC topology server is a per namespace service associated with the tipc name {1, 1}. When a namespace is deleted, that name must be withdrawn before we call sk_release_kernel because the kernel socket release is done in init_net and trying to withdraw a TIPC name published in another namespace will fail with an error as: [ 170.093264] Unable to remove local publication [ 170.093264] (type=1, lower=1, ref=2184244004, key=2184244005) We fix this by breaking the association between the topology server name and socket before calling sk_release_kernel. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17tipc: fix a potential deadlock when nametable is purgedYing Xue1-2/+2
[ 28.531768] ============================================= [ 28.532322] [ INFO: possible recursive locking detected ] [ 28.532322] 3.19.0+ #194 Not tainted [ 28.532322] --------------------------------------------- [ 28.532322] insmod/583 is trying to acquire lock: [ 28.532322] (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [ 28.532322] but task is already holding lock: [ 28.532322] (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc] [ 28.532322] [ 28.532322] other info that might help us debug this: [ 28.532322] Possible unsafe locking scenario: [ 28.532322] [ 28.532322] CPU0 [ 28.532322] ---- [ 28.532322] lock(&(&nseq->lock)->rlock); [ 28.532322] lock(&(&nseq->lock)->rlock); [ 28.532322] [ 28.532322] *** DEADLOCK *** [ 28.532322] [ 28.532322] May be due to missing lock nesting notation [ 28.532322] [ 28.532322] 3 locks held by insmod/583: [ 28.532322] #0: (net_mutex){+.+.+.}, at: [<ffffffff8163e30f>] register_pernet_subsys+0x1f/0x50 [ 28.532322] #1: (&(&tn->nametbl_lock)->rlock){+.....}, at: [<ffffffffa000e091>] tipc_nametbl_stop+0xb1/0x1f0 [tipc] [ 28.532322] #2: (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc] [ 28.532322] [ 28.532322] stack backtrace: [ 28.532322] CPU: 1 PID: 583 Comm: insmod Not tainted 3.19.0+ #194 [ 28.532322] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.532322] ffffffff82394460 ffff8800144cb928 ffffffff81792f3e 0000000000000007 [ 28.532322] ffffffff82394460 ffff8800144cba28 ffffffff810a8080 ffff8800144cb998 [ 28.532322] ffffffff810a4df3 ffff880013e9cb10 ffffffff82b0d330 ffff880013e9cb38 [ 28.532322] Call Trace: [ 28.532322] [<ffffffff81792f3e>] dump_stack+0x4c/0x65 [ 28.532322] [<ffffffff810a8080>] __lock_acquire+0x740/0x1ca0 [ 28.532322] [<ffffffff810a4df3>] ? __bfs+0x23/0x270 [ 28.532322] [<ffffffff810a7506>] ? check_irq_usage+0x96/0xe0 [ 28.532322] [<ffffffff810a8a73>] ? __lock_acquire+0x1133/0x1ca0 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffffa000e11e>] tipc_nametbl_stop+0x13e/0x1f0 [tipc] [ 28.532322] [<ffffffffa000dfe5>] ? tipc_nametbl_stop+0x5/0x1f0 [tipc] [ 28.532322] [<ffffffffa0004bab>] tipc_init_net+0x13b/0x150 [tipc] [ 28.532322] [<ffffffffa0004a75>] ? tipc_init_net+0x5/0x150 [tipc] [ 28.532322] [<ffffffff8163dece>] ops_init+0x4e/0x150 [ 28.532322] [<ffffffff810aa66d>] ? trace_hardirqs_on+0xd/0x10 [ 28.532322] [<ffffffff8163e1d3>] register_pernet_operations+0xf3/0x190 [ 28.532322] [<ffffffff8163e31e>] register_pernet_subsys+0x2e/0x50 [ 28.532322] [<ffffffffa002406a>] tipc_init+0x6a/0x1000 [tipc] [ 28.532322] [<ffffffffa0024000>] ? 0xffffffffa0024000 [ 28.532322] [<ffffffff810002d9>] do_one_initcall+0x89/0x1c0 [ 28.532322] [<ffffffff811b7cb0>] ? kmem_cache_alloc_trace+0x50/0x1b0 [ 28.532322] [<ffffffff810e725b>] ? do_init_module+0x2b/0x200 [ 28.532322] [<ffffffff810e7294>] do_init_module+0x64/0x200 [ 28.532322] [<ffffffff810e9353>] load_module+0x12f3/0x18e0 [ 28.532322] [<ffffffff810e5890>] ? show_initstate+0x50/0x50 [ 28.532322] [<ffffffff810e9a19>] SyS_init_module+0xd9/0x110 [ 28.532322] [<ffffffff8179f3b3>] sysenter_dispatch+0x7/0x1f Before tipc_purge_publications() calls tipc_nametbl_remove_publ() to remove a publication with a name sequence, the name sequence's lock is held. However, when tipc_nametbl_remove_publ() calling tipc_nameseq_remove_publ() to remove the publication, it first tries to query name sequence instance with the publication, and then holds the lock of the found name sequence. But as the lock may be already taken in tipc_purge_publications(), deadlock happens like above scenario demonstrated. As tipc_nameseq_remove_publ() doesn't grab name sequence's lock, the deadlock can be avoided if it's directly invoked by tipc_purge_publications(). Fixes: 97ede29e80ee ("tipc: convert name table read-write lock to RCU") Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17tipc: fix netns refcnt leakYing Xue3-92/+39
When the TIPC module is loaded, we launch a topology server in kernel space, which in its turn is creating TIPC sockets for communication with topology server users. Because both the socket's creator and provider reside in the same module, it is necessary that the TIPC module's reference count remains zero after the server is started and the socket created; otherwise it becomes impossible to perform "rmmod" even on an idle module. Currently, we achieve this by defining a separate "tipc_proto_kern" protocol struct, that is used only for kernel space socket allocations. This structure has the "owner" field set to NULL, which restricts the module reference count from being be bumped when sk_alloc() for local sockets is called. Furthermore, we have defined three kernel-specific functions, tipc_sock_create_local(), tipc_sock_release_local() and tipc_sock_accept_local(), to avoid the module counter being modified when module local sockets are created or deleted. This has worked well until we introduced name space support. However, after name space support was introduced, we have observed that a reference count leak occurs, because the netns counter is not decremented in tipc_sock_delete_local(). This commit remedies this problem. But instead of just modifying tipc_sock_delete_local(), we eliminate the whole parallel socket handling infrastructure, and start using the regular sk_create_kern(), kernel_accept() and sk_release_kernel() calls. Since those functions manipulate the module counter, we must now compensate for that by explicitly decrementing the counter after module local sockets are created, and increment it just before calling sk_release_kernel(). Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace") Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Cong Wang <cwang@twopensource.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17inet: fix request sock refcountingEric Dumazet7-18/+22
While testing last patch series, I found req sock refcounting was wrong. We must set skc_refcnt to 1 for all request socks added in hashes, but also on request sockets created by FastOpen or syncookies. It is tricky because we need to defer this initialization so that future RCU lookups do not try to take a refcount on a not yet fully initialized request socket. Also get rid of ireq_refcnt alias. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 13854e5a6046 ("inet: add proper refcounting to request sock") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17inet: avoid fastopen lock for regular accept()Eric Dumazet1-2/+4
It is not because a TCP listener is FastOpen ready that all incoming sockets actually used FastOpen. Avoid taking queue->fastopenq->lock if not needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17tcp: rename struct tcp_request_sock listenerEric Dumazet7-25/+15
The listener field in struct tcp_request_sock is a pointer back to the listener. We now have req->rsk_listener, so TCP only needs one boolean and not a full pointer. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17inet: add rsk_listener field to struct request_sockEric Dumazet2-4/+10
Once we'll be able to lookup request sockets in ehash table, we'll need to get access to listener which created this request. This avoid doing a lookup to find the listener, which benefits for a more solid SO_REUSEPORT, and is needed once we no longer queue request sock into a listener private queue. Note that 'struct tcp_request_sock'->listener could be reduced to a single bit, as TFO listener should match req->rsk_listener. TFO will no longer need to hold a reference on the listener. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17inet: uninline inet_reqsk_alloc()Eric Dumazet2-22/+26
inet_reqsk_alloc() is becoming fat and should not be inlined. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17inet: add sk_listener argument to inet_reqsk_alloc()Eric Dumazet6-13/+11
listener socket can be used to set net pointer, and will be later used to hold a reference on listener. Add a const qualifier to first argument (struct request_sock_ops *), and factorize all write_pnet(&ireq->ireq_net, sock_net(sk)); Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17tcp: uninline tcp_oow_rate_limited()Eric Dumazet2-30/+32
tcp_oow_rate_limited() is hardly used in fast path, there is no point inlining it. Signed-of-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17tcp: move tcp_openreq_init() to tcp_input.cEric Dumazet2-25/+25
This big helper is called once from tcp_conn_request(), there is no point having it in an include. Compiler will inline it anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17inet: move ir_mark to fill a holeEric Dumazet1-6/+5
On 64bit arches, we can save 8 bytes in inet_request_sock by moving ir_mark to fill a hole. While we are at it, inet_request_mark() can get a const qualifier for listener socket. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17netfilter: xt_socket: prepare for TCP_NEW_SYN_RECV supportEric Dumazet1-12/+22
TCP request socks soon will be visible in ehash table. xt_socket will be able to match them, but first we need to make sure to not consider them as full sockets. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17netfilter: tproxy: prepare TCP_NEW_SYN_RECV supportEric Dumazet1-6/+12
TCP request socks soon will be visible in ehash table. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17netfilter: use sk_fullsock() helperEric Dumazet5-6/+6
Upcoming request sockets have TCP_NEW_SYN_RECV state and should be special cased a bit like TCP_TIME_WAIT sockets. Signed-off-by; Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17bpf: allow BPF programs access 'protocol' and 'vlan_tci' fieldsAlexei Starovoitov3-22/+62
as a follow on to patch 70006af95515 ("bpf: allow eBPF access skb fields") this patch allows 'protocol' and 'vlan_tci' fields to be accessible from extended BPF programs. The usage of 'protocol', 'vlan_present' and 'vlan_tci' fields is the same as corresponding SKF_AD_PROTOCOL, SKF_AD_VLAN_TAG_PRESENT and SKF_AD_VLAN_TAG accesses in classic BPF. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17via-velocity: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: via-rhine: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17ehea: constify of_device_id arrayFabian Frederick1-2/+2
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17IBM-EMAC: constify of_device_id arrayFabian Frederick5-5/+5
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17can: constify of_device_id arrayFabian Frederick5-5/+5
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: phy: constify of_device_id arrayFabian Frederick5-5/+5
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17orinoco: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: xilinx: constify of_device_id arrayFabian Frederick3-3/+3
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: greth: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17netdev: octeon_mgmt: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: ethernet: apple: constify of_device_id arrayFabian Frederick2-2/+2
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17drivers: net: xgene: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: ethoc: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net/fsl: constify of_device_id arrayFabian Frederick10-12/+12
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17Altera TSE: constify of_device_id arrayFabian Frederick1-2/+2
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: netcp: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16rhashtable: Avoid calculating hash again to unlockThomas Graf1-6/+5
Caching the lock pointer avoids having to hash on the object again to unlock the bucket locks. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16tcp_metrics: fix wrong lockdep annotationsEric Dumazet1-12/+8
Changes in tcp_metric hash table are protected by tcp_metrics_lock only, not by genl_mutex While we are at it use deref_locked() instead of rcu_dereference() in tcp_new() to avoid unnecessary barrier, as we hold tcp_metrics_lock as well. Reported-by: Andrew Vagin <avagin@parallels.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 098a697b497e ("tcp_metrics: Use a single hash table for all network namespaces.") Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16dsa: change "select" to "depends on" for NET_SWITCHDEV and for NET_DSAJiri Pirko2-9/+7
This would fix randconfig compile error: net/built-in.o: In function `netdev_switch_fib_ipv4_abort': (.text+0xf7811): undefined reference to `fib_flush_external' Also it fixes following warnings: warning: (NET_DSA) selects NET_SWITCHDEV which has unmet direct dependencies (NET && INET) warning: (NET_DSA_MV88E6060 && NET_DSA_MV88E6131 && NET_DSA_MV88E6123_61_65 && NET_DSA_MV88E6171 && NET_DSA_MV88E6352 && NET_DSA_BCM_SF2) selects NET_DSA which has unmet direct dependencies (NET && HAVE_NET_DSA && NET_SWITCHDEV) Reported-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16net/fsl: modify xgmac_mdio for little endian SoCsShaohui Xie1-28/+68
MDIO controller on little endian Socs, e.g. ls2085a is similar to the controller on big endian Socs, but the MDIO access is little endian, we use I/O accessor function to handle endianness, so the driver can run on little endian Socs. A property "little-endian" is used in DTS to indicate the MDIO is little endian, if driver probes the property, driver will access MDIO in little endian, otherwise, driver works in big endian by default. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16net/fsl: fix a bug in xgmac_mdioShaohui Xie1-1/+1
There is a bug in xgmac_wait_until_done() which mdio_stat should be used instead of mdio_data when checking if busy bit is cleared. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.